* [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2)
@ 2005-02-14 12:17 David Vrabel
2005-02-14 12:23 ` Geert Uytterhoeven
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: David Vrabel @ 2005-02-14 12:17 UTC (permalink / raw)
To: linux-fbdev-devel list
Hi,
This set of two patches add a new option (FB_SOFTWARE_CFB_OPS) to the
framebuffer Kconfig to enable building the generic software cfbfillrect,
cfbcopyarea and cfbimageblt objects. This cuts out a lot of stuff from
the Makefile and allows drivers in their own directory to be more
self-contained.
1/2 -- add the FB_SOFTWARE_CFB_OPS option to Kconfig and Makefile
2/2 -- make all drivers (where appropriate) select FB_SOFTWARE_CFB_OPS
Please consider applying, thanks.
David Vrabel
--
David Vrabel, Design Engineer
Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233
Cambridge CB1 7EA, UK Web: http://www.arcom.com/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) 2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel @ 2005-02-14 12:23 ` Geert Uytterhoeven 2005-02-14 13:50 ` David Vrabel 2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons 2005-02-14 12:43 ` [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) David Vrabel 2005-02-14 12:46 ` [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) David Vrabel 2 siblings, 2 replies; 14+ messages in thread From: Geert Uytterhoeven @ 2005-02-14 12:23 UTC (permalink / raw) To: David Vrabel, linux-fbdev-devel list On Mon, 14 Feb 2005, David Vrabel wrote: > This set of two patches add a new option (FB_SOFTWARE_CFB_OPS) to the > framebuffer Kconfig to enable building the generic software cfbfillrect, > cfbcopyarea and cfbimageblt objects. This cuts out a lot of stuff from > the Makefile and allows drivers in their own directory to be more > self-contained. > > 1/2 -- add the FB_SOFTWARE_CFB_OPS option to Kconfig and Makefile > 2/2 -- make all drivers (where appropriate) select FB_SOFTWARE_CFB_OPS > > Please consider applying, thanks. Thanks, good idea! But I'd prefer to have 3 separate options, since some drivers don't need all 3 of them, e.g.: - CONFIG_CFB_FILLRECT - CONFIG_CFB_COPYAREA - CONFIG_CFB_IMAGEBLT Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) 2005-02-14 12:23 ` Geert Uytterhoeven @ 2005-02-14 13:50 ` David Vrabel 2005-02-14 14:04 ` [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) David Vrabel 2005-02-14 14:06 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel 2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons 1 sibling, 2 replies; 14+ messages in thread From: David Vrabel @ 2005-02-14 13:50 UTC (permalink / raw) To: Geert Uytterhoeven; +Cc: linux-fbdev-devel list Geert Uytterhoeven wrote: > On Mon, 14 Feb 2005, David Vrabel wrote: > >>This set of two patches add a new option (FB_SOFTWARE_CFB_OPS) to the >>framebuffer Kconfig to enable building the generic software cfbfillrect, >>cfbcopyarea and cfbimageblt objects. This cuts out a lot of stuff from >>the Makefile and allows drivers in their own directory to be more >>self-contained. > > But I'd prefer to have 3 separate options, since some drivers don't need all 3 > of them, e.g.: > - CONFIG_CFB_FILLRECT > - CONFIG_CFB_COPYAREA > - CONFIG_CFB_IMAGEBLT Sure. Here's a new set of two patches. 1/2 -- add FB_CFB_xxx options to framebuffer Kconfig and Makefile 2/2 -- make all framebuffer drivers (where appropriate) select FB_CFB_xxx David Vrabel -- David Vrabel, Design Engineer Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233 Cambridge CB1 7EA, UK Web: http://www.arcom.com/ ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) 2005-02-14 13:50 ` David Vrabel @ 2005-02-14 14:04 ` David Vrabel 2005-02-14 14:06 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel 1 sibling, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-14 14:04 UTC (permalink / raw) To: linux-fbdev-devel; +Cc: Geert Uytterhoeven [-- Attachment #1: Type: text/plain, Size: 247 bytes --] Add FB_CFB_FILLRECT, FB_CFB_COPYAREA, and FB_CFB_IMAGEBLIT options to the framebuffer Kconfig and Makefile. This enables the inclusion of the cfb_fillrect, cfb_copyarea and cfb_imageblt functions. Signed-off-by: David Vrabel <dvrabel@arcom.com> [-- Attachment #2: fb-kbuild-add-FB_CFB_xxx --] [-- Type: text/plain, Size: 1858 bytes --] Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 13:38:03.257815634 +0000 @@ -38,6 +38,30 @@ (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FB_CFB_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the cfb_fillrect function for generic software rectangle filling. + This is used by drivers that don't provide their own (accelerated) version. + +config FB_CFB_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the cfb_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) version. + +config FB_CFB_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the cfb_imageblit function for generic software image blitting. + This is used by drivers that don't provide their own (accelerated) version. + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 13:36:19.558072584 +0000 @@ -13,6 +13,10 @@ obj-$(CONFIG_PPC) += macmodes.o endif +obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o +obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o +obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o + # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o ^ permalink raw reply [flat|nested] 14+ messages in thread
* Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) 2005-02-14 13:50 ` David Vrabel 2005-02-14 14:04 ` [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) David Vrabel @ 2005-02-14 14:06 ` David Vrabel 2005-02-14 14:12 ` David Vrabel 1 sibling, 1 reply; 14+ messages in thread From: David Vrabel @ 2005-02-14 14:06 UTC (permalink / raw) To: linux-fbdev-devel; +Cc: Geert Uytterhoeven [-- Attachment #1: Type: text/plain, Size: 223 bytes --] Make all framebuffer drivers (where appropriate) select FB_CFB_FILLRECT, FB_CFB_COPYAREA, and/or FB_CFB_IMAGEBLIT instead of specifying the objects in the Makefile directly. Signed-off-by: David Vrabel <dvrabel@arcom.com> [-- Attachment #2: fb-kbuild-use-FB_CFB_xxx --] [-- Type: text/plain, Size: 26645 bytes --] Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 13:38:03.257815634 +0000 @@ -70,6 +94,9 @@ config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -85,6 +112,9 @@ config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -100,6 +130,9 @@ config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on FB && ARM && ARM_AMBA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -113,6 +146,9 @@ config FB_ACORN bool "Acorn VIDC support" depends on FB && ARM && ARCH_ACORN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -121,10 +157,16 @@ config FB_CLPS711X bool "CLPS711X LCD support" depends on FB && ARM && ARCH_CLPS711X + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_SA1100 bool "SA-1100 LCD support" depends on FB && ARM && ARCH_SA1100 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -136,6 +178,9 @@ config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -146,11 +191,16 @@ bool depends on FB && APOLLO default y + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT config FB_Q40 bool depends on FB && Q40 default y + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_AMIGA tristate "Amiga native chipset support" @@ -191,6 +241,9 @@ config FB_CYBER tristate "Amiga CyberVision 64 support" depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -202,6 +255,9 @@ config FB_VIRGE bool "Amiga CyberVision 64/3D support " depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -221,6 +277,9 @@ config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on FB && ZORRO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -235,6 +294,9 @@ config FB_OF bool "Open Firmware frame buffer device support" depends on FB && (PPC64 || PPC_OF) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y if you want support with Open Firmware for your graphics board. @@ -242,6 +304,9 @@ config FB_CONTROL bool "Apple \"control\" display support" depends on FB && PPC_PMAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. @@ -249,6 +314,9 @@ config FB_PLATINUM bool "Apple \"platinum\" display support" depends on FB && PPC_PMAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. @@ -256,6 +324,9 @@ config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on FB && (MAC || PPC_PMAC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. @@ -263,6 +334,9 @@ config FB_CT65550 bool "Chips 65550 display support" depends on FB && PPC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -270,10 +344,14 @@ config FB_ASILIANT bool "Chips 69000 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_IMSTT bool "IMS Twin Turbo display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -287,6 +365,9 @@ config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -297,6 +378,9 @@ config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -314,16 +398,24 @@ config FB_MAC bool "Generic Macintosh display support" depends on FB && MAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool depends on FB && HP300 + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT default y config FB_TGA tristate "TGA framebuffer support" depends on FB && ALPHA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -331,6 +423,9 @@ config FB_VESA bool "VESA VGA graphics support" depends on FB && (X86 || X86_64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -345,6 +440,9 @@ config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a Hercules mono graphics card. @@ -370,12 +468,18 @@ config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help SGI Visual Workstation support for framebuffer graphics. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on FB && (SGI_IP32 || X86_VISWS) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -400,6 +504,9 @@ config FB_BW2 bool "BWtwo support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the BWtwo frame buffer. @@ -412,6 +519,8 @@ config FB_CG6 bool "CGsix (GX,TurboGX) support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -419,6 +528,9 @@ config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -437,6 +549,9 @@ config FB_EPSON1355 bool "Epson 1355 framebuffer support" depends on FB && (SUPERH || ARCH_CEIVA) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -449,6 +564,9 @@ select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -484,6 +602,9 @@ select AGP select AGP_INTEL select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -541,6 +662,9 @@ config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -696,6 +820,9 @@ config FB_RADEON_OLD tristate "ATI Radeon display support (Old driver)" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -743,6 +870,9 @@ config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -754,6 +884,9 @@ config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -801,6 +934,9 @@ select I2C_ALGOBIT if FB_SAVAGE_I2C select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -834,6 +970,9 @@ config FB_SIS tristate "SiS acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SiS 300, 315 and 330 series VGA chipsets. Specs available at http://www.sis.com @@ -858,6 +997,9 @@ tristate "NeoMagic display support" depends on FB && PCI select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -868,6 +1010,9 @@ config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -878,6 +1023,7 @@ config FB_3DFX tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -911,6 +1057,9 @@ config FB_TRIDENT tristate "Trident support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -947,7 +1096,7 @@ Say 'Y' here to allow you to select framebuffer drivers for the AMD Geode family of processors. -source "drivers/video/geode/Kconfig +source "drivers/video/geode/Kconfig" config FB_SBUS bool "SBUS and UPA framebuffers" @@ -958,6 +1107,8 @@ config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -965,6 +1116,9 @@ config FB_TCX bool "TCX (SS4/SS5 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -972,6 +1126,9 @@ config FB_CG14 bool "CGfourteen (SX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -979,6 +1136,9 @@ config FB_P9100 bool "P9100 (Sparcbook 3 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -986,6 +1146,9 @@ config FB_LEO bool "Leo (ZX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -997,6 +1160,9 @@ config FB_IGA bool "IGA 168x display support" depends on SPARC32 && FB_PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1004,6 +1170,9 @@ config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1011,6 +1180,9 @@ config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board PMAG-BA framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1019,6 +1191,9 @@ config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer spport" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board PMAGB-B framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1027,6 +1202,9 @@ config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer spport" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board framebuffer in the Maxine (5000/20, /25, /33) version of the DECstation. There is a @@ -1035,6 +1213,9 @@ config FB_TX3912 bool "TMPTX3912/PR31700 frame buffer support" depends on FB && NINO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1044,6 +1225,9 @@ config FB_68328 bool "Motorola 68328 native frame buffer support" depends on (M68328 || M68EZ328 || M68VZ328) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1051,6 +1235,9 @@ config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1082,6 +1269,9 @@ config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 13:36:19.558072584 +0000 @@ -13,91 +13,74 @@ # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o -obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER) += cyberfb.o -obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o +obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o - -obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \ - cfbcopyarea.o vgastate.o -obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o -obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \ - vgastate.o -obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o - -obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o +obj-$(CONFIG_FB_MATROX) += matrox/ +obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o +obj-$(CONFIG_FB_ATY) += aty/ +obj-$(CONFIG_FB_ATY128) += aty/ +obj-$(CONFIG_FB_RADEON) += aty/ +obj-$(CONFIG_FB_SIS) += sis/ +obj-$(CONFIG_FB_KYRO) += kyro/ +obj-$(CONFIG_FB_SAVAGE) += savage/ +obj-$(CONFIG_FB_I810) += vgastate.o +obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o obj-$(CONFIG_FB_VIRGE) += virgefb.o -obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o -ifneq ($(CONFIG_FB_3DFX_ACCEL),y) -obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o -endif -obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o +obj-$(CONFIG_FB_3DFX) += tdfxfb.o +obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o +obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o +obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o +obj-$(CONFIG_FB_CT65550) += chipsfb.o +obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_S3TRIO) += S3triofb.o -obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_FM2) += fm2fb.o +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_STI) += stifb.o +obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o +obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o +obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o +obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o +obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o +obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o +obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o +obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o +obj-$(CONFIG_FB_SGIVW) += sgivwfb.o +obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o -obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o +obj-$(CONFIG_FB_HGA) += hgafb.o +obj-$(CONFIG_FB_IGA) += igafb.o +obj-$(CONFIG_FB_APOLLO) += dnfb.o +obj-$(CONFIG_FB_Q40) += q40fb.o +obj-$(CONFIG_FB_TGA) += tgafb.o +obj-$(CONFIG_FB_HP300) += hpfb.o +obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_SUN3) += sun3fb.o -obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o +obj-$(CONFIG_FB_HIT) += hitfb.o +obj-$(CONFIG_FB_TX3912) += tx3912fb.o +obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o +obj-$(CONFIG_FB_PVR2) += pvr2fb.o +obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o +obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o +obj-$(CONFIG_FB_MAXINE) += maxinefb.o +obj-$(CONFIG_FB_VOODOO1) += sstfb.o +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_68328) += 68328fb.o +obj-$(CONFIG_FB_GBE) += gbefb.o +obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o +obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o +obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_GEODE) += geode/ # Platform or fallback drivers go here -obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o vgastate.o -obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o +obj-$(CONFIG_FB_VESA) += vesafb.o +obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o +obj-$(CONFIG_FB_OF) += offb.o # the test framebuffer is last -obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_VIRTUAL) += vfb.o ^ permalink raw reply [flat|nested] 14+ messages in thread
* Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) 2005-02-14 14:06 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel @ 2005-02-14 14:12 ` David Vrabel 0 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-14 14:12 UTC (permalink / raw) To: linux-fbdev-devel; +Cc: Geert Uytterhoeven [-- Attachment #1: Type: text/plain, Size: 425 bytes --] (Bad patch, here it is again.) Make all framebuffer drivers (where appropriate) select FB_CFB_FILLRECT, FB_CFB_COPYAREA, and/or FB_CFB_IMAGEBLIT instead of specifying the objects in the Makefile directly. Signed-off-by: David Vrabel <dvrabel@arcom.com> David Vrabel -- David Vrabel, Design Engineer Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233 Cambridge CB1 7EA, UK Web: http://www.arcom.com/ [-- Attachment #2: fb-kbuild-use-FB_CFB_xxx --] [-- Type: text/plain, Size: 26353 bytes --] Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 13:38:03.257815634 +0000 @@ -70,6 +94,9 @@ config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -85,6 +112,9 @@ config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -100,6 +130,9 @@ config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on FB && ARM && ARM_AMBA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -113,6 +146,9 @@ config FB_ACORN bool "Acorn VIDC support" depends on FB && ARM && ARCH_ACORN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -121,10 +157,16 @@ config FB_CLPS711X bool "CLPS711X LCD support" depends on FB && ARM && ARCH_CLPS711X + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_SA1100 bool "SA-1100 LCD support" depends on FB && ARM && ARCH_SA1100 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -136,6 +178,9 @@ config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -146,11 +191,16 @@ bool depends on FB && APOLLO default y + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT config FB_Q40 bool depends on FB && Q40 default y + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_AMIGA tristate "Amiga native chipset support" @@ -191,6 +241,9 @@ config FB_CYBER tristate "Amiga CyberVision 64 support" depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -202,6 +255,9 @@ config FB_VIRGE bool "Amiga CyberVision 64/3D support " depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -221,6 +277,9 @@ config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on FB && ZORRO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -235,6 +294,9 @@ config FB_OF bool "Open Firmware frame buffer device support" depends on FB && (PPC64 || PPC_OF) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y if you want support with Open Firmware for your graphics board. @@ -242,6 +304,9 @@ config FB_CONTROL bool "Apple \"control\" display support" depends on FB && PPC_PMAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. @@ -249,6 +314,9 @@ config FB_PLATINUM bool "Apple \"platinum\" display support" depends on FB && PPC_PMAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. @@ -256,6 +324,9 @@ config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on FB && (MAC || PPC_PMAC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. @@ -263,6 +334,9 @@ config FB_CT65550 bool "Chips 65550 display support" depends on FB && PPC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -270,10 +344,14 @@ config FB_ASILIANT bool "Chips 69000 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_IMSTT bool "IMS Twin Turbo display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -287,6 +365,9 @@ config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -297,6 +378,9 @@ config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -314,16 +398,24 @@ config FB_MAC bool "Generic Macintosh display support" depends on FB && MAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool depends on FB && HP300 + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT default y config FB_TGA tristate "TGA framebuffer support" depends on FB && ALPHA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -331,6 +423,9 @@ config FB_VESA bool "VESA VGA graphics support" depends on FB && (X86 || X86_64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -345,6 +440,9 @@ config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a Hercules mono graphics card. @@ -370,12 +468,18 @@ config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help SGI Visual Workstation support for framebuffer graphics. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on FB && (SGI_IP32 || X86_VISWS) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -400,6 +504,9 @@ config FB_BW2 bool "BWtwo support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the BWtwo frame buffer. @@ -412,6 +519,8 @@ config FB_CG6 bool "CGsix (GX,TurboGX) support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -419,6 +528,9 @@ config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -437,6 +549,9 @@ config FB_EPSON1355 bool "Epson 1355 framebuffer support" depends on FB && (SUPERH || ARCH_CEIVA) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -449,6 +564,9 @@ select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -484,6 +602,9 @@ select AGP select AGP_INTEL select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -541,6 +662,9 @@ config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -696,6 +820,9 @@ config FB_RADEON_OLD tristate "ATI Radeon display support (Old driver)" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -743,6 +870,9 @@ config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -754,6 +884,9 @@ config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -801,6 +934,9 @@ select I2C_ALGOBIT if FB_SAVAGE_I2C select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -834,6 +970,9 @@ config FB_SIS tristate "SiS acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SiS 300, 315 and 330 series VGA chipsets. Specs available at http://www.sis.com @@ -858,6 +997,9 @@ tristate "NeoMagic display support" depends on FB && PCI select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -868,6 +1010,9 @@ config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -878,6 +1023,7 @@ config FB_3DFX tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -911,6 +1057,9 @@ config FB_TRIDENT tristate "Trident support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -958,6 +1107,8 @@ config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -965,6 +1116,9 @@ config FB_TCX bool "TCX (SS4/SS5 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -972,6 +1126,9 @@ config FB_CG14 bool "CGfourteen (SX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -979,6 +1136,9 @@ config FB_P9100 bool "P9100 (Sparcbook 3 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -986,6 +1146,9 @@ config FB_LEO bool "Leo (ZX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -997,6 +1160,9 @@ config FB_IGA bool "IGA 168x display support" depends on SPARC32 && FB_PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1004,6 +1170,9 @@ config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1011,6 +1180,9 @@ config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board PMAG-BA framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1019,6 +1191,9 @@ config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer spport" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board PMAGB-B framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1027,6 +1202,9 @@ config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer spport" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board framebuffer in the Maxine (5000/20, /25, /33) version of the DECstation. There is a @@ -1035,6 +1213,9 @@ config FB_TX3912 bool "TMPTX3912/PR31700 frame buffer support" depends on FB && NINO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1044,6 +1225,9 @@ config FB_68328 bool "Motorola 68328 native frame buffer support" depends on (M68328 || M68EZ328 || M68VZ328) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1051,6 +1235,9 @@ config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1082,6 +1269,9 @@ config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 13:36:19.558072584 +0000 @@ -13,91 +13,74 @@ # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o -obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER) += cyberfb.o -obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o +obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o - -obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \ - cfbcopyarea.o vgastate.o -obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o -obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \ - vgastate.o -obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o - -obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o +obj-$(CONFIG_FB_MATROX) += matrox/ +obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o +obj-$(CONFIG_FB_ATY) += aty/ +obj-$(CONFIG_FB_ATY128) += aty/ +obj-$(CONFIG_FB_RADEON) += aty/ +obj-$(CONFIG_FB_SIS) += sis/ +obj-$(CONFIG_FB_KYRO) += kyro/ +obj-$(CONFIG_FB_SAVAGE) += savage/ +obj-$(CONFIG_FB_I810) += vgastate.o +obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o obj-$(CONFIG_FB_VIRGE) += virgefb.o -obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o -ifneq ($(CONFIG_FB_3DFX_ACCEL),y) -obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o -endif -obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o +obj-$(CONFIG_FB_3DFX) += tdfxfb.o +obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o +obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o +obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o +obj-$(CONFIG_FB_CT65550) += chipsfb.o +obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_S3TRIO) += S3triofb.o -obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_FM2) += fm2fb.o +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_STI) += stifb.o +obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o +obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o +obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o +obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o +obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o +obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o +obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o +obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o +obj-$(CONFIG_FB_SGIVW) += sgivwfb.o +obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o -obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o +obj-$(CONFIG_FB_HGA) += hgafb.o +obj-$(CONFIG_FB_IGA) += igafb.o +obj-$(CONFIG_FB_APOLLO) += dnfb.o +obj-$(CONFIG_FB_Q40) += q40fb.o +obj-$(CONFIG_FB_TGA) += tgafb.o +obj-$(CONFIG_FB_HP300) += hpfb.o +obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_SUN3) += sun3fb.o -obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o +obj-$(CONFIG_FB_HIT) += hitfb.o +obj-$(CONFIG_FB_TX3912) += tx3912fb.o +obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o +obj-$(CONFIG_FB_PVR2) += pvr2fb.o +obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o +obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o +obj-$(CONFIG_FB_MAXINE) += maxinefb.o +obj-$(CONFIG_FB_VOODOO1) += sstfb.o +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_68328) += 68328fb.o +obj-$(CONFIG_FB_GBE) += gbefb.o +obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o +obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o +obj-$(CONFIG_FB_PXA) += pxafb.o # Platform or fallback drivers go here -obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o vgastate.o -obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o +obj-$(CONFIG_FB_VESA) += vesafb.o +obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o +obj-$(CONFIG_FB_OF) += offb.o # the test framebuffer is last -obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_VIRTUAL) += vfb.o ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) 2005-02-14 12:23 ` Geert Uytterhoeven 2005-02-14 13:50 ` David Vrabel @ 2005-02-14 17:25 ` James Simmons 2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel 1 sibling, 1 reply; 14+ messages in thread From: James Simmons @ 2005-02-14 17:25 UTC (permalink / raw) To: linux-fbdev-devel list; +Cc: David Vrabel > > This set of two patches add a new option (FB_SOFTWARE_CFB_OPS) to the > > framebuffer Kconfig to enable building the generic software cfbfillrect, > > cfbcopyarea and cfbimageblt objects. This cuts out a lot of stuff from > > the Makefile and allows drivers in their own directory to be more > > self-contained. > > > > 1/2 -- add the FB_SOFTWARE_CFB_OPS option to Kconfig and Makefile > > 2/2 -- make all drivers (where appropriate) select FB_SOFTWARE_CFB_OPS > > > > Please consider applying, thanks. > > Thanks, good idea! > > But I'd prefer to have 3 separate options, since some drivers don't need all 3 > of them, e.g.: > - CONFIG_CFB_FILLRECT > - CONFIG_CFB_COPYAREA > - CONFIG_CFB_IMAGEBLT We should have CONFIG_SOFT_CURSOR for the sotftware cursor, softcursor.c, as well. David could you add that as well? ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- add options for building software ops (0/4) 2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons @ 2005-02-15 10:45 ` David Vrabel 2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel ` (3 more replies) 0 siblings, 4 replies; 14+ messages in thread From: David Vrabel @ 2005-02-15 10:45 UTC (permalink / raw) To: linux-fbdev-devel James Simmons wrote: >>>1/2 -- add the FB_SOFTWARE_CFB_OPS option to Kconfig and Makefile >>>2/2 -- make all drivers (where appropriate) select FB_SOFTWARE_CFB_OPS >> >>But I'd prefer to have 3 separate options, since some drivers don't need all 3 >>of them, e.g.: >> - CONFIG_CFB_FILLRECT >> - CONFIG_CFB_COPYAREA >> - CONFIG_CFB_IMAGEBLT > > We should have CONFIG_SOFT_CURSOR for the sotftware cursor, softcursor.c, as > well. David could you add that as well? Done. Even though it seems of little use. It seems only two drivers don't use soft_cursor (rivafb and intelfb). A new set of four patches to follow. 1/4 -- add FB_CFB_xxx options to framebuffer Kconfig and Makefile 2/4 -- make all framebuffer drivers (where appropriate) select FB_CFB_xxx 3/4 -- add FB_SOFT_CURSOR options to framebuffer Kconfig and Makefile 4/4 -- make all framebuffer drivers (where appropriate) select FB_SOFT_CURSOR. David Vrabel -- David Vrabel, Design Engineer Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233 Cambridge CB1 7EA, UK Web: http://www.arcom.com/ ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click ^ permalink raw reply [flat|nested] 14+ messages in thread
* Framebuffer kbuild -- add FB_CFB_xxx options (1/4) 2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel @ 2005-02-15 10:51 ` David Vrabel 2005-02-15 10:53 ` [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4) David Vrabel ` (2 subsequent siblings) 3 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-15 10:51 UTC (permalink / raw) To: linux-fbdev-devel [-- Attachment #1: Type: text/plain, Size: 247 bytes --] Add FB_CFB_FILLRECT, FB_CFB_COPYAREA, and FB_CFB_IMAGEBLIT options to the framebuffer Kconfig and Makefile. This enables the inclusion of the cfb_fillrect, cfb_copyarea and cfb_imageblt functions. Signed-off-by: David Vrabel <dvrabel@arcom.com> [-- Attachment #2: fb-kbuild-add-FB_CFB_xxx --] [-- Type: text/plain, Size: 1893 bytes --] %status pending %patch Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 14:59:28.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-15 10:12:37.657581067 +0000 @@ -38,6 +38,33 @@ (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FB_CFB_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the cfb_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version. + +config FB_CFB_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the cfb_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version. + +config FB_CFB_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the cfb_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version. + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 14:59:28.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-15 10:11:43.064192554 +0000 @@ -13,6 +13,10 @@ obj-$(CONFIG_PPC) += macmodes.o endif +obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o +obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o +obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o + # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4) 2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel 2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel @ 2005-02-15 10:53 ` David Vrabel 2005-02-15 10:54 ` [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) David Vrabel 2005-02-15 10:55 ` [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4) David Vrabel 3 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-15 10:53 UTC (permalink / raw) To: linux-fbdev-devel [-- Attachment #1: Type: text/plain, Size: 224 bytes --] Make all framebuffer drivers (where appropriate) select FB_CFB_FILLRECT, FB_CFB_COPYAREA, and/or FB_CFB_IMAGEBLIT instead of specifying the objects in the Makefile directly. Signed-off-by: David Vrabel <dvrabel@arcom.com> [-- Attachment #2: fb-kbuild-use-FB_CFB_xxx --] [-- Type: text/plain, Size: 26387 bytes --] %status pending %patch Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-15 10:12:37.657581067 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-15 10:12:46.078098585 +0000 @@ -97,6 +97,9 @@ config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -112,6 +115,9 @@ config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -127,6 +133,9 @@ config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on FB && ARM && ARM_AMBA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -140,6 +149,9 @@ config FB_ACORN bool "Acorn VIDC support" depends on FB && ARM && ARCH_ACORN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -148,10 +160,16 @@ config FB_CLPS711X bool "CLPS711X LCD support" depends on FB && ARM && ARCH_CLPS711X + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_SA1100 bool "SA-1100 LCD support" depends on FB && ARM && ARCH_SA1100 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -163,6 +181,9 @@ config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -173,11 +194,16 @@ bool depends on FB && APOLLO default y + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT config FB_Q40 bool depends on FB && Q40 default y + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_AMIGA tristate "Amiga native chipset support" @@ -218,6 +244,9 @@ config FB_CYBER tristate "Amiga CyberVision 64 support" depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -229,6 +258,9 @@ config FB_VIRGE bool "Amiga CyberVision 64/3D support " depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -248,6 +280,9 @@ config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on FB && ZORRO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -262,6 +297,9 @@ config FB_OF bool "Open Firmware frame buffer device support" depends on FB && (PPC64 || PPC_OF) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y if you want support with Open Firmware for your graphics board. @@ -269,6 +307,9 @@ config FB_CONTROL bool "Apple \"control\" display support" depends on FB && PPC_PMAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. @@ -276,6 +317,9 @@ config FB_PLATINUM bool "Apple \"platinum\" display support" depends on FB && PPC_PMAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. @@ -283,6 +327,9 @@ config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on FB && (MAC || PPC_PMAC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. @@ -290,6 +337,9 @@ config FB_CT65550 bool "Chips 65550 display support" depends on FB && PPC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -297,10 +347,14 @@ config FB_ASILIANT bool "Chips 69000 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_IMSTT bool "IMS Twin Turbo display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -314,6 +368,9 @@ config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -324,6 +381,9 @@ config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -341,16 +401,24 @@ config FB_MAC bool "Generic Macintosh display support" depends on FB && MAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool depends on FB && HP300 + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT default y config FB_TGA tristate "TGA framebuffer support" depends on FB && ALPHA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -358,6 +426,9 @@ config FB_VESA bool "VESA VGA graphics support" depends on FB && (X86 || X86_64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -372,6 +443,9 @@ config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a Hercules mono graphics card. @@ -397,12 +471,18 @@ config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help SGI Visual Workstation support for framebuffer graphics. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on FB && (SGI_IP32 || X86_VISWS) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -427,6 +507,9 @@ config FB_BW2 bool "BWtwo support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the BWtwo frame buffer. @@ -439,6 +522,8 @@ config FB_CG6 bool "CGsix (GX,TurboGX) support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -446,6 +531,9 @@ config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -464,6 +552,9 @@ config FB_EPSON1355 bool "Epson 1355 framebuffer support" depends on FB && (SUPERH || ARCH_CEIVA) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -476,6 +567,9 @@ select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -511,6 +605,9 @@ select AGP select AGP_INTEL select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -568,6 +665,9 @@ config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -723,6 +823,9 @@ config FB_RADEON_OLD tristate "ATI Radeon display support (Old driver)" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -770,6 +873,9 @@ config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -781,6 +887,9 @@ config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -828,6 +937,9 @@ select I2C_ALGOBIT if FB_SAVAGE_I2C select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -861,6 +973,9 @@ config FB_SIS tristate "SiS acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SiS 300, 315 and 330 series VGA chipsets. Specs available at http://www.sis.com @@ -885,6 +1000,9 @@ tristate "NeoMagic display support" depends on FB && PCI select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -895,6 +1013,9 @@ config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -905,6 +1026,7 @@ config FB_3DFX tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -938,6 +1060,9 @@ config FB_TRIDENT tristate "Trident support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -975,6 +1100,8 @@ config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -982,6 +1109,9 @@ config FB_TCX bool "TCX (SS4/SS5 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -989,6 +1119,9 @@ config FB_CG14 bool "CGfourteen (SX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -996,6 +1129,9 @@ config FB_P9100 bool "P9100 (Sparcbook 3 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -1003,6 +1139,9 @@ config FB_LEO bool "Leo (ZX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -1014,6 +1153,9 @@ config FB_IGA bool "IGA 168x display support" depends on SPARC32 && FB_PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1021,6 +1163,9 @@ config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1028,6 +1173,9 @@ config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board PMAG-BA framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1036,6 +1184,9 @@ config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer spport" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board PMAGB-B framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1044,6 +1195,9 @@ config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer spport" depends on FB && DECSTATION && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here to directly support the on-board framebuffer in the Maxine (5000/20, /25, /33) version of the DECstation. There is a @@ -1052,6 +1206,9 @@ config FB_TX3912 bool "TMPTX3912/PR31700 frame buffer support" depends on FB && NINO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1061,6 +1218,9 @@ config FB_68328 bool "Motorola 68328 native frame buffer support" depends on (M68328 || M68EZ328 || M68VZ328) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1068,6 +1228,9 @@ config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1099,6 +1262,9 @@ config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-15 10:11:43.064192554 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-15 10:12:46.082097881 +0000 @@ -20,90 +20,74 @@ # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o -obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER) += cyberfb.o -obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o +obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o -obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \ - cfbcopyarea.o vgastate.o -obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o -obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \ - vgastate.o -obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o - -obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o +obj-$(CONFIG_FB_MATROX) += matrox/ +obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o +obj-$(CONFIG_FB_ATY) += aty/ +obj-$(CONFIG_FB_ATY128) += aty/ +obj-$(CONFIG_FB_RADEON) += aty/ +obj-$(CONFIG_FB_SIS) += sis/ +obj-$(CONFIG_FB_KYRO) += kyro/ +obj-$(CONFIG_FB_SAVAGE) += savage/ +obj-$(CONFIG_FB_I810) += vgastate.o +obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o obj-$(CONFIG_FB_VIRGE) += virgefb.o -obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o -ifneq ($(CONFIG_FB_3DFX_ACCEL),y) -obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o -endif -obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o +obj-$(CONFIG_FB_3DFX) += tdfxfb.o +obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o +obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o +obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o +obj-$(CONFIG_FB_CT65550) += chipsfb.o +obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_S3TRIO) += S3triofb.o -obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_FM2) += fm2fb.o +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_STI) += stifb.o +obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o +obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o +obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o +obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o +obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o +obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o +obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o +obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o +obj-$(CONFIG_FB_SGIVW) += sgivwfb.o +obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o -obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o +obj-$(CONFIG_FB_HGA) += hgafb.o +obj-$(CONFIG_FB_IGA) += igafb.o +obj-$(CONFIG_FB_APOLLO) += dnfb.o +obj-$(CONFIG_FB_Q40) += q40fb.o +obj-$(CONFIG_FB_TGA) += tgafb.o +obj-$(CONFIG_FB_HP300) += hpfb.o +obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_SUN3) += sun3fb.o -obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o +obj-$(CONFIG_FB_HIT) += hitfb.o +obj-$(CONFIG_FB_TX3912) += tx3912fb.o +obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o +obj-$(CONFIG_FB_PVR2) += pvr2fb.o +obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o +obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o +obj-$(CONFIG_FB_MAXINE) += maxinefb.o +obj-$(CONFIG_FB_VOODOO1) += sstfb.o +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_68328) += 68328fb.o +obj-$(CONFIG_FB_GBE) += gbefb.o +obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o +obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o +obj-$(CONFIG_FB_PXA) += pxafb.o # Platform or fallback drivers go here -obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o vgastate.o -obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o +obj-$(CONFIG_FB_VESA) += vesafb.o +obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o +obj-$(CONFIG_FB_OF) += offb.o # the test framebuffer is last -obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_VIRTUAL) += vfb.o ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) 2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel 2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel 2005-02-15 10:53 ` [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4) David Vrabel @ 2005-02-15 10:54 ` David Vrabel 2005-02-15 10:55 ` [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4) David Vrabel 3 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-15 10:54 UTC (permalink / raw) To: linux-fbdev-devel [-- Attachment #1: Type: text/plain, Size: 173 bytes --] Add FB_SOFT_CURSOR option to the framebuffer Kconfig and Makefile. This enables the inclusion of the soft_cursor function. Signed-off-by: David Vrabel <dvrabel@arcom.com> [-- Attachment #2: fb-kbuild-add-FB_SOFT_CURSOR --] [-- Type: text/plain, Size: 1685 bytes --] Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-15 10:12:46.078098585 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-15 10:14:15.831297005 +0000 @@ -65,6 +65,15 @@ blitting. This is used by drivers that don't provide their own (accelerated) version. +config FB_SOFT_CURSOR + tristate + depends on FB + default n + ---help--- + Include the soft_cursor function for generic software cursor support. + This is used by drivers that don't provide their own (accelerated) + version. + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-15 10:12:46.082097881 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-15 10:12:58.740869230 +0000 @@ -7,7 +7,7 @@ obj-$(CONFIG_VT) += console/ obj-$(CONFIG_LOGO) += logo/ -obj-$(CONFIG_FB) += fbmem.o fbmon.o fbcmap.o fbsysfs.o modedb.o softcursor.o +obj-$(CONFIG_FB) += fbmem.o fbmon.o fbcmap.o fbsysfs.o modedb.o # Only include macmodes.o if we have FB support and are PPC ifeq ($(CONFIG_FB),y) obj-$(CONFIG_PPC) += macmodes.o @@ -16,6 +16,7 @@ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o +obj-$(CONFIG_FB_SOFT_CURSOR) += softcursor.o # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4) 2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel ` (2 preceding siblings ...) 2005-02-15 10:54 ` [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) David Vrabel @ 2005-02-15 10:55 ` David Vrabel 3 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-15 10:55 UTC (permalink / raw) To: linux-fbdev-devel [-- Attachment #1: Type: text/plain, Size: 121 bytes --] Make all framebuffer drivers (where appropriate) select FB_SOFT_CURSOR. Signed-off-by: David Vrabel <dvrabel@arcom.com> [-- Attachment #2: fb-kbuild-use-FB_SOFT_CURSOR --] [-- Type: text/plain, Size: 13815 bytes --] Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-15 10:15:38.741700140 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-15 10:25:52.403661336 +0000 @@ -109,6 +109,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -127,6 +128,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -145,6 +147,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -161,6 +164,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -172,6 +176,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR config FB_SA1100 bool "SA-1100 LCD support" @@ -179,6 +184,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -193,6 +199,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -205,6 +212,7 @@ default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR config FB_Q40 bool @@ -213,6 +221,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR config FB_AMIGA tristate "Amiga native chipset support" @@ -256,6 +265,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -270,6 +280,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -292,6 +303,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -309,6 +321,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y if you want support with Open Firmware for your graphics board. @@ -319,6 +332,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. @@ -329,6 +343,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. @@ -339,6 +354,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. @@ -349,6 +365,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -359,11 +376,13 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR config FB_IMSTT bool "IMS Twin Turbo display support" depends on FB && PCI select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -380,6 +399,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -393,6 +413,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -413,6 +434,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 @@ -420,6 +442,7 @@ depends on FB && HP300 select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR default y config FB_TGA @@ -428,6 +451,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -438,6 +462,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -455,6 +480,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y here if you have a Hercules mono graphics card. @@ -483,6 +509,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help SGI Visual Workstation support for framebuffer graphics. @@ -492,6 +519,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -519,6 +547,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the BWtwo frame buffer. @@ -533,6 +562,7 @@ depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -543,6 +573,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -564,6 +595,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -617,6 +649,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -677,6 +710,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -835,6 +869,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -885,6 +920,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -899,6 +935,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -949,6 +986,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -985,6 +1023,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the SiS 300, 315 and 330 series VGA chipsets. Specs available at http://www.sis.com @@ -1012,6 +1051,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1025,6 +1065,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1036,6 +1077,7 @@ tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -1072,6 +1114,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -1111,6 +1154,7 @@ depends on FB_SBUS && SPARC64 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -1121,6 +1165,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -1131,6 +1176,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -1141,6 +1187,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -1151,6 +1198,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -1165,6 +1213,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1175,6 +1224,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1185,6 +1235,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y here to directly support the on-board PMAG-BA framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1196,6 +1247,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y here to directly support the on-board PMAGB-B framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1207,6 +1259,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y here to directly support the on-board framebuffer in the Maxine (5000/20, /25, /33) version of the DECstation. There is a @@ -1218,6 +1271,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1230,6 +1284,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1240,6 +1295,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1274,6 +1330,7 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) 2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel 2005-02-14 12:23 ` Geert Uytterhoeven @ 2005-02-14 12:43 ` David Vrabel 2005-02-14 12:46 ` [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) David Vrabel 2 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-14 12:43 UTC (permalink / raw) To: linux-fbdev-devel Add a FB_SOFTWARE_CFB_OPS option to the framebuffer Kconfig and Makefile. This enables the building of the cfbfillrect, cfbcopyarea and cfbimageblt objects. Signed-off-by: David Vrabel <dvrabel@arcom.com> Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 11:27:34.506113502 +0000 @@ -38,6 +38,14 @@ (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FB_SOFTWARE_CFB_OPS + tristate + depends on FB + default n + ---help--- + This enables functions for some generic software drawing operations for drivers + which don't provide their own (accelerated) ones. + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 11:28:49.062987325 +0000 @@ -13,6 +13,8 @@ obj-$(CONFIG_PPC) += macmodes.o endif +obj-$(CONFIG_FB_SOFTWARE_CFB_OPS) += cfbfillrect.o cfbcopyarea.o cfbimgblt.o + # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click ^ permalink raw reply [flat|nested] 14+ messages in thread
* [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) 2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel 2005-02-14 12:23 ` Geert Uytterhoeven 2005-02-14 12:43 ` [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) David Vrabel @ 2005-02-14 12:46 ` David Vrabel 2 siblings, 0 replies; 14+ messages in thread From: David Vrabel @ 2005-02-14 12:46 UTC (permalink / raw) To: linux-fbdev-devel Make all framebuffer drivers (where appropriate) select FB_SOFTWARE_CFB_OPS instead of specifying the objects in the Makefile directly. Signed-off-by: David Vrabel <dvrabel@arcom.com> Index: linux-2.6-i386/drivers/video/Kconfig =================================================================== --- linux-2.6-i386.orig/drivers/video/Kconfig 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Kconfig 2005-02-14 11:52:54.543501963 +0000 @@ -70,6 +78,7 @@ config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) + select FB_SOFTWARE_CFB_OPS ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -85,6 +94,7 @@ config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -100,6 +110,7 @@ config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on FB && ARM && ARM_AMBA + select FB_SOFTWARE_CFB_OPS help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -113,6 +124,7 @@ config FB_ACORN bool "Acorn VIDC support" depends on FB && ARM && ARCH_ACORN + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -121,10 +133,12 @@ config FB_CLPS711X bool "CLPS711X LCD support" depends on FB && ARM && ARCH_CLPS711X + select FB_SOFTWARE_CFB_OPS config FB_SA1100 bool "SA-1100 LCD support" depends on FB && ARM && ARCH_SA1100 + select FB_SOFTWARE_CFB_OPS help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -136,6 +150,7 @@ config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) + select FB_SOFTWARE_CFB_OPS help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -146,11 +161,13 @@ bool depends on FB && APOLLO default y + select FB_SOFTWARE_CFB_OPS config FB_Q40 bool depends on FB && Q40 default y + select FB_SOFTWARE_CFB_OPS config FB_AMIGA tristate "Amiga native chipset support" @@ -191,6 +208,7 @@ config FB_CYBER tristate "Amiga CyberVision 64 support" depends on FB && ZORRO && BROKEN + select FB_SOFTWARE_CFB_OPS help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -202,6 +220,7 @@ config FB_VIRGE bool "Amiga CyberVision 64/3D support " depends on FB && ZORRO && BROKEN + select FB_SOFTWARE_CFB_OPS help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -221,6 +240,7 @@ config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on FB && ZORRO + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -235,6 +255,7 @@ config FB_OF bool "Open Firmware frame buffer device support" depends on FB && (PPC64 || PPC_OF) + select FB_SOFTWARE_CFB_OPS help Say Y if you want support with Open Firmware for your graphics board. @@ -242,6 +263,7 @@ config FB_CONTROL bool "Apple \"control\" display support" depends on FB && PPC_PMAC + select FB_SOFTWARE_CFB_OPS help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. @@ -249,6 +271,7 @@ config FB_PLATINUM bool "Apple \"platinum\" display support" depends on FB && PPC_PMAC + select FB_SOFTWARE_CFB_OPS help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. @@ -256,6 +279,7 @@ config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on FB && (MAC || PPC_PMAC) + select FB_SOFTWARE_CFB_OPS help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. @@ -263,6 +287,7 @@ config FB_CT65550 bool "Chips 65550 display support" depends on FB && PPC + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -270,10 +295,12 @@ config FB_ASILIANT bool "Chips 69000 display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS config FB_IMSTT bool "IMS Twin Turbo display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. @@ -287,6 +314,7 @@ config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -297,6 +325,7 @@ config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC + select FB_SOFTWARE_CFB_OPS default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -314,16 +343,19 @@ config FB_MAC bool "Generic Macintosh display support" depends on FB && MAC + select FB_SOFTWARE_CFB_OPS # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool depends on FB && HP300 + select FB_SOFTWARE_CFB_OPS default y config FB_TGA tristate "TGA framebuffer support" depends on FB && ALPHA + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -331,6 +363,7 @@ config FB_VESA bool "VESA VGA graphics support" depends on FB && (X86 || X86_64) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -345,6 +378,7 @@ config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 + select FB_SOFTWARE_CFB_OPS help Say Y here if you have a Hercules mono graphics card. @@ -370,12 +404,14 @@ config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS + select FB_SOFTWARE_CFB_OPS help SGI Visual Workstation support for framebuffer graphics. config FB_GBE bool "SGI Graphics Backend frame buffer support" depends on FB && (SGI_IP32 || X86_VISWS) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -400,6 +436,7 @@ config FB_BW2 bool "BWtwo support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the BWtwo frame buffer. @@ -412,6 +449,7 @@ config FB_CG6 bool "CGsix (GX,TurboGX) support" depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -419,6 +457,7 @@ config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST + select FB_SOFTWARE_CFB_OPS ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -437,6 +476,7 @@ config FB_EPSON1355 bool "Epson 1355 framebuffer support" depends on FB && (SUPERH || ARCH_CEIVA) + select FB_SOFTWARE_CFB_OPS help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -449,6 +489,7 @@ select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -484,6 +525,7 @@ select AGP select AGP_INTEL select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -541,6 +583,7 @@ config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -696,6 +739,7 @@ config FB_RADEON_OLD tristate "ATI Radeon display support (Old driver)" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -743,6 +787,7 @@ config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -754,6 +799,7 @@ config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI depends on FB + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -801,6 +847,7 @@ select I2C_ALGOBIT if FB_SAVAGE_I2C select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -834,6 +881,7 @@ config FB_SIS tristate "SiS acceleration" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the SiS 300, 315 and 330 series VGA chipsets. Specs available at http://www.sis.com @@ -858,6 +906,7 @@ tristate "NeoMagic display support" depends on FB && PCI select FB_MODE_HELPERS + select FB_SOFTWARE_CFB_OPS help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -868,6 +917,7 @@ config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -878,6 +928,7 @@ config FB_3DFX tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -911,6 +962,7 @@ config FB_TRIDENT tristate "Trident support" depends on FB && PCI + select FB_SOFTWARE_CFB_OPS ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -958,6 +1010,7 @@ config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -965,6 +1018,7 @@ config FB_TCX bool "TCX (SS4/SS5 only) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -972,6 +1026,7 @@ config FB_CG14 bool "CGfourteen (SX) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -979,6 +1034,7 @@ config FB_P9100 bool "P9100 (Sparcbook 3 only) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -986,6 +1042,7 @@ config FB_LEO bool "Leo (ZX) support" depends on FB_SBUS + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -997,6 +1054,7 @@ config FB_IGA bool "IGA 168x display support" depends on SPARC32 && FB_PCI + select FB_SOFTWARE_CFB_OPS help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1004,6 +1062,7 @@ config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 + select FB_SOFTWARE_CFB_OPS help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1011,6 +1070,7 @@ config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" depends on FB && DECSTATION && TC + select FB_SOFTWARE_CFB_OPS help Say Y here to directly support the on-board PMAG-BA framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1019,6 +1079,7 @@ config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer spport" depends on FB && DECSTATION && TC + select FB_SOFTWARE_CFB_OPS help Say Y here to directly support the on-board PMAGB-B framebuffer in the 5000/1xx versions of the DECstation. There is a page dedicated @@ -1027,6 +1088,7 @@ config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer spport" depends on FB && DECSTATION && TC + select FB_SOFTWARE_CFB_OPS help Say Y here to directly support the on-board framebuffer in the Maxine (5000/20, /25, /33) version of the DECstation. There is a @@ -1035,6 +1097,7 @@ config FB_TX3912 bool "TMPTX3912/PR31700 frame buffer support" depends on FB && NINO + select FB_SOFTWARE_CFB_OPS help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1044,6 +1107,7 @@ config FB_68328 bool "Motorola 68328 native frame buffer support" depends on (M68328 || M68EZ328 || M68VZ328) + select FB_SOFTWARE_CFB_OPS help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1051,6 +1115,7 @@ config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA + select FB_SOFTWARE_CFB_OPS ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1082,6 +1147,7 @@ config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB + select FB_SOFTWARE_CFB_OPS ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics Index: linux-2.6-i386/drivers/video/Makefile =================================================================== --- linux-2.6-i386.orig/drivers/video/Makefile 2005-02-14 11:02:39.000000000 +0000 +++ linux-2.6-i386/drivers/video/Makefile 2005-02-14 11:55:41.324139249 +0000 @@ -13,93 +13,78 @@ obj-$(CONFIG_PPC) += macmodes.o endif +obj-$(CONFIG_FB_SOFTWARE_CFB_OPS) += cfbfillrect.o cfbcopyarea.o cfbimgblt.o + # Hardware specific drivers go first obj-$(CONFIG_FB_RETINAZ3) += retz3fb.o obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o -obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER) += cyberfb.o -obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PM2) += pm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o +obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o - -obj-$(CONFIG_FB_MATROX) += matrox/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_RIVA) += riva/ cfbimgblt.o cfbfillrect.o \ - cfbcopyarea.o vgastate.o -obj-$(CONFIG_FB_ATY) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_ATY128) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_RADEON) += aty/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_SIS) += sis/ cfbcopyarea.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_KYRO) += kyro/ cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SAVAGE) += savage/ cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o -obj-$(CONFIG_FB_I810) += cfbcopyarea.o cfbfillrect.o cfbimgblt.o \ - vgastate.o -obj-$(CONFIG_FB_INTEL) += cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o - -obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o vgastate.o +obj-$(CONFIG_FB_MATROX) += matrox/ +obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o +obj-$(CONFIG_FB_ATY) += aty/ +obj-$(CONFIG_FB_ATY128) += aty/ +obj-$(CONFIG_FB_RADEON) += aty/ +obj-$(CONFIG_FB_SIS) += sis/ +obj-$(CONFIG_FB_KYRO) += kyro/ +obj-$(CONFIG_FB_SAVAGE) += savage/ +obj-$(CONFIG_FB_I810) += vgastate.o +obj-$(CONFIG_FB_RADEON_OLD) += radeonfb.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o obj-$(CONFIG_FB_VIRGE) += virgefb.o -obj-$(CONFIG_FB_3DFX) += tdfxfb.o cfbimgblt.o -ifneq ($(CONFIG_FB_3DFX_ACCEL),y) -obj-$(CONFIG_FB_3DFX) += cfbfillrect.o cfbcopyarea.o -endif -obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CT65550) += chipsfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IMSTT) += imsttfb.o cfbimgblt.o +obj-$(CONFIG_FB_3DFX) += tdfxfb.o +obj-$(CONFIG_FB_CONTROL) += controlfb.o macmodes.o +obj-$(CONFIG_FB_PLATINUM) += platinumfb.o macmodes.o +obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o macmodes.o +obj-$(CONFIG_FB_CT65550) += chipsfb.o +obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_S3TRIO) += S3triofb.o -obj-$(CONFIG_FB_FM2) += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TRIDENT) += tridentfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_STI) += stifb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o cfbimgblt.o cfbcopyarea.o \ - cfbfillrect.o -obj-$(CONFIG_FB_SGIVW) += sgivwfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ACORN) += acornfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_FM2) += fm2fb.o +obj-$(CONFIG_FB_TRIDENT) += tridentfb.o +obj-$(CONFIG_FB_STI) += stifb.o +obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o +obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o +obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o +obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o +obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o +obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o +obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o +obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o +obj-$(CONFIG_FB_SGIVW) += sgivwfb.o +obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o -obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HGA) += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_IGA) += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_APOLLO) += dnfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_Q40) += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_TGA) += tgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_HP300) += hpfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_G364) += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_SA1100) += sa1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_MAC) += macfb.o macmodes.o +obj-$(CONFIG_FB_HGA) += hgafb.o +obj-$(CONFIG_FB_IGA) += igafb.o +obj-$(CONFIG_FB_APOLLO) += dnfb.o +obj-$(CONFIG_FB_Q40) += q40fb.o +obj-$(CONFIG_FB_TGA) += tgafb.o +obj-$(CONFIG_FB_HP300) += hpfb.o +obj-$(CONFIG_FB_G364) += g364fb.o +obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_SUN3) += sun3fb.o -obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o -obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_GBE) += gbefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o -obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o +obj-$(CONFIG_FB_HIT) += hitfb.o +obj-$(CONFIG_FB_TX3912) += tx3912fb.o +obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o +obj-$(CONFIG_FB_PVR2) += pvr2fb.o +obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o +obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o +obj-$(CONFIG_FB_MAXINE) += maxinefb.o +obj-$(CONFIG_FB_VOODOO1) += sstfb.o +obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_68328) += 68328fb.o +obj-$(CONFIG_FB_GBE) += gbefb.o +obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o +obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o +obj-$(CONFIG_FB_PXA) += pxafb.o # Platform or fallback drivers go here -obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o -obj-$(CONFIG_FB_VGA16) += vga16fb.o cfbfillrect.o cfbcopyarea.o \ - cfbimgblt.o vgastate.o -obj-$(CONFIG_FB_OF) += offb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o +obj-$(CONFIG_FB_VESA) += vesafb.o +obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o +obj-$(CONFIG_FB_OF) += offb.o # the test framebuffer is last -obj-$(CONFIG_FB_VIRTUAL) += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o +obj-$(CONFIG_FB_VIRTUAL) += vfb.o ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2005-02-15 10:55 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-02-14 12:17 [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) David Vrabel 2005-02-14 12:23 ` Geert Uytterhoeven 2005-02-14 13:50 ` David Vrabel 2005-02-14 14:04 ` [patch] Framebuffer kbuild -- add FB_CFB_xxx options (1/2) David Vrabel 2005-02-14 14:06 ` Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/2) David Vrabel 2005-02-14 14:12 ` David Vrabel 2005-02-14 17:25 ` [patch] framebuffer Kconfig -- add option for building cfb*.o (0/2) James Simmons 2005-02-15 10:45 ` [patch] Framebuffer kbuild -- add options for building software ops (0/4) David Vrabel 2005-02-15 10:51 ` Framebuffer kbuild -- add FB_CFB_xxx options (1/4) David Vrabel 2005-02-15 10:53 ` [patch] Framebuffer kbuild -- make all drivers select FB_CFB_xxx (2/4) David Vrabel 2005-02-15 10:54 ` [patch] Framebuffer kbuild -- add FB_SOFT_CURSOR option (3/4) David Vrabel 2005-02-15 10:55 ` [patch] Framebuffer kbuild -- make all drivers select FB_SOFT_CURSOR (4/4) David Vrabel 2005-02-14 12:43 ` [patch] Framebuffer kbuild -- add FB_SOFTWARE_CFB_OPS for building cfb*.o (1/2) David Vrabel 2005-02-14 12:46 ` [patch] Framebuffer kbuild -- make drivers select FB_SOFTWARE_CFB_OPS (2/2) David Vrabel
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).