* [PATCH 16/16] atyfb: Remove BIOS-less booting
@ 2005-11-30 1:27 Antonino A. Daplas
0 siblings, 0 replies; only message in thread
From: Antonino A. Daplas @ 2005-11-30 1:27 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linux Fbdev development list
CONFIG_ATYFB_XL_INIT option is broken for a long time. It will always
cause a kernel hang.
Since no one has fixed this problem for some time now, remove it from
atyfb.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
---
drivers/video/Kconfig | 6 -
drivers/video/aty/Makefile | 1
drivers/video/aty/atyfb.h | 1
drivers/video/aty/atyfb_base.c | 4
drivers/video/aty/xlinit.c | 359 ----------------------------------------
5 files changed, 0 insertions(+), 371 deletions(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3e470c8..d6940ec 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -993,12 +993,6 @@ config FB_ATY_GENERIC_LCD
Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
Rage XC, or Rage XL chipset.
-config FB_ATY_XL_INIT
- bool "Rage XL No-BIOS Init support"
- depends on FB_ATY_CT
- help
- Say Y here to support booting a Rage XL without BIOS support.
-
config FB_ATY_GX
bool "Mach64 GX support" if PCI
depends on FB_ATY
diff --git a/drivers/video/aty/Makefile b/drivers/video/aty/Makefile
index 9dec962..1852139 100644
--- a/drivers/video/aty/Makefile
+++ b/drivers/video/aty/Makefile
@@ -5,7 +5,6 @@ obj-$(CONFIG_FB_RADEON) += radeonfb.o
atyfb-y := atyfb_base.o mach64_accel.o mach64_cursor.o
atyfb-$(CONFIG_FB_ATY_GX) += mach64_gx.o
atyfb-$(CONFIG_FB_ATY_CT) += mach64_ct.o
-atyfb-$(CONFIG_FB_ATY_XL_INIT) += xlinit.o
atyfb-objs := $(atyfb-y)
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 09de173..71d30b5 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -354,6 +354,5 @@ static inline void wait_for_idle(struct
extern void aty_reset_engine(const struct atyfb_par *par);
extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info);
-extern int atyfb_xl_init(struct fb_info *info);
extern void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par);
extern u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index de684cf..4645d07 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2291,10 +2291,6 @@ static int __init aty_init(struct fb_inf
par->dac_ops = &aty_dac_ct;
par->pll_ops = &aty_pll_ct;
par->bus_type = PCI;
-#ifdef CONFIG_FB_ATY_XL_INIT
- if (IS_XL(par->pci_id))
- atyfb_xl_init(info);
-#endif
par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
ramname = aty_ct_ram[par->ram_type];
/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
diff --git a/drivers/video/aty/xlinit.c b/drivers/video/aty/xlinit.c
deleted file mode 100644
index a085cbf..0000000
--- a/drivers/video/aty/xlinit.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * ATI Rage XL Initialization. Support for Xpert98 and Victoria
- * PCI cards.
- *
- * Copyright (C) 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <video/mach64.h>
-#include "atyfb.h"
-
-#define MPLL_GAIN 0xad
-#define VPLL_GAIN 0xd5
-
-enum {
- VICTORIA = 0,
- XPERT98,
- NUM_XL_CARDS
-};
-
-extern const struct aty_pll_ops aty_pll_ct;
-
-#define DEFAULT_CARD XPERT98
-static int xl_card = DEFAULT_CARD;
-
-static const struct xl_card_cfg_t {
- int ref_crystal; // 10^4 Hz
- int mem_type;
- int mem_size;
- u32 mem_cntl;
- u32 ext_mem_cntl;
- u32 mem_addr_config;
- u32 bus_cntl;
- u32 dac_cntl;
- u32 hw_debug;
- u32 custom_macro_cntl;
- u8 dll2_cntl;
- u8 pll_yclk_cntl;
-} card_cfg[NUM_XL_CARDS] = {
- // VICTORIA
- { 2700, SDRAM, 0x800000,
- 0x10757A3B, 0x64000C81, 0x00110202, 0x7b33A040,
- 0x82010102, 0x48803800, 0x005E0179,
- 0x50, 0x25
- },
- // XPERT98
- { 1432, WRAM, 0x800000,
- 0x00165A2B, 0xE0000CF1, 0x00200213, 0x7333A001,
- 0x8000000A, 0x48833800, 0x007F0779,
- 0x10, 0x19
- }
-};
-
-typedef struct {
- u8 lcd_reg;
- u32 val;
-} lcd_tbl_t;
-
-static const lcd_tbl_t lcd_tbl[] = {
- { 0x01, 0x000520C0 },
- { 0x08, 0x02000408 },
- { 0x03, 0x00000F00 },
- { 0x00, 0x00000000 },
- { 0x02, 0x00000000 },
- { 0x04, 0x00000000 },
- { 0x05, 0x00000000 },
- { 0x06, 0x00000000 },
- { 0x33, 0x00000000 },
- { 0x34, 0x00000000 },
- { 0x35, 0x00000000 },
- { 0x36, 0x00000000 },
- { 0x37, 0x00000000 }
-};
-
-static void reset_gui(struct atyfb_par *par)
-{
- aty_st_8(GEN_TEST_CNTL+1, 0x01, par);
- aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
- aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
- mdelay(5);
-}
-
-static void reset_sdram(struct atyfb_par *par)
-{
- u8 temp;
-
- temp = aty_ld_8(EXT_MEM_CNTL, par);
- temp |= 0x02;
- aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_RESET = 1b
- temp |= 0x08;
- aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST = 10b
- temp |= 0x0c;
- aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST = 11b
- mdelay(5);
- temp &= 0xf3;
- aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST = 00b
- temp &= 0xfd;
- aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_REST = 0b
- mdelay(5);
-}
-
-static void init_dll(struct atyfb_par *par)
-{
- // enable DLL
- aty_st_pll_ct(PLL_GEN_CNTL,
- aty_ld_pll_ct(PLL_GEN_CNTL, par) & 0x7f,
- par);
-
- // reset DLL
- aty_st_pll_ct(DLL_CNTL, 0x82, par);
- aty_st_pll_ct(DLL_CNTL, 0xE2, par);
- mdelay(5);
- aty_st_pll_ct(DLL_CNTL, 0x82, par);
- mdelay(6);
-}
-
-static void reset_clocks(struct atyfb_par *par, struct pll_ct *pll,
- int hsync_enb)
-{
- reset_gui(par);
- aty_st_pll_ct(MCLK_FB_DIV, pll->mclk_fb_div, par);
- aty_st_pll_ct(SCLK_FB_DIV, pll->sclk_fb_div, par);
-
- mdelay(15);
- init_dll(par);
- aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
- mdelay(5);
- aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
- mdelay(6);
- reset_sdram(par);
- aty_st_8(CRTC_GEN_CNTL+3,
- hsync_enb ? 0x00 : 0x04, par);
-
- aty_st_pll_ct(SPLL_CNTL2, pll->spll_cntl2, par);
- aty_st_pll_ct(PLL_GEN_CNTL, pll->pll_gen_cntl, par);
- aty_st_pll_ct(PLL_VCLK_CNTL, pll->pll_vclk_cntl, par);
-}
-
-int atyfb_xl_init(struct fb_info *info)
-{
- const struct xl_card_cfg_t * card = &card_cfg[xl_card];
- struct atyfb_par *par = (struct atyfb_par *) info->par;
- union aty_pll pll;
- int err;
- u32 temp;
-
- aty_st_8(CONFIG_STAT0, 0x85, par);
- mdelay(10);
-
- /*
- * The following needs to be set before the call
- * to var_to_pll() below. They'll be re-set again
- * to the same values in aty_init().
- */
- par->ref_clk_per = 100000000UL/card->ref_crystal;
- par->ram_type = card->mem_type;
- info->fix.smem_len = card->mem_size;
- if (xl_card == VICTORIA) {
- // the MCLK, XCLK are 120MHz on victoria card
- par->mclk_per = 1000000/120;
- par->xclk_per = 1000000/120;
- par->features &= ~M64F_MFB_FORCE_4;
- }
-
- /*
- * Calculate mclk and xclk dividers, etc. The passed
- * pixclock and bpp values don't matter yet, the vclk
- * isn't programmed until later.
- */
- if ((err = aty_pll_ct.var_to_pll(info, 39726, 8, &pll)))
- return err;
-
- aty_st_pll_ct(LVDS_CNTL0, 0x00, par);
- aty_st_pll_ct(DLL2_CNTL, card->dll2_cntl, par);
- aty_st_pll_ct(V2PLL_CNTL, 0x10, par);
- aty_st_pll_ct(MPLL_CNTL, MPLL_GAIN, par);
- aty_st_pll_ct(VPLL_CNTL, VPLL_GAIN, par);
- aty_st_pll_ct(PLL_VCLK_CNTL, 0x00, par);
- aty_st_pll_ct(VFC_CNTL, 0x1B, par);
- aty_st_pll_ct(PLL_REF_DIV, pll.ct.pll_ref_div, par);
- aty_st_pll_ct(PLL_EXT_CNTL, pll.ct.pll_ext_cntl, par);
- aty_st_pll_ct(SPLL_CNTL2, 0x03, par);
- aty_st_pll_ct(PLL_GEN_CNTL, 0x44, par);
-
- reset_clocks(par, &pll.ct, 0);
- mdelay(10);
-
- aty_st_pll_ct(VCLK_POST_DIV, 0x03, par);
- aty_st_pll_ct(VCLK0_FB_DIV, 0xDA, par);
- aty_st_pll_ct(VCLK_POST_DIV, 0x0F, par);
- aty_st_pll_ct(VCLK1_FB_DIV, 0xF5, par);
- aty_st_pll_ct(VCLK_POST_DIV, 0x3F, par);
- aty_st_pll_ct(PLL_EXT_CNTL, 0x40 | pll.ct.pll_ext_cntl, par);
- aty_st_pll_ct(VCLK2_FB_DIV, 0x00, par);
- aty_st_pll_ct(VCLK_POST_DIV, 0xFF, par);
- aty_st_pll_ct(PLL_EXT_CNTL, 0xC0 | pll.ct.pll_ext_cntl, par);
- aty_st_pll_ct(VCLK3_FB_DIV, 0x00, par);
-
- aty_st_8(BUS_CNTL, 0x01, par);
- aty_st_le32(BUS_CNTL, card->bus_cntl | 0x08000000, par);
-
- aty_st_le32(CRTC_GEN_CNTL, 0x04000200, par);
- aty_st_le16(CONFIG_STAT0, 0x0020, par);
- aty_st_le32(MEM_CNTL, 0x10151A33, par);
- aty_st_le32(EXT_MEM_CNTL, 0xE0000C01, par);
- aty_st_le16(CRTC_GEN_CNTL+2, 0x0000, par);
- aty_st_le32(DAC_CNTL, card->dac_cntl, par);
- aty_st_le16(GEN_TEST_CNTL, 0x0100, par);
- aty_st_le32(CUSTOM_MACRO_CNTL, 0x003C0171, par);
- aty_st_le32(MEM_BUF_CNTL, 0x00382848, par);
-
- aty_st_le32(HW_DEBUG, card->hw_debug, par);
- aty_st_le16(MEM_ADDR_CONFIG, 0x0000, par);
- aty_st_le16(GP_IO+2, 0x0000, par);
- aty_st_le16(GEN_TEST_CNTL, 0x0000, par);
- aty_st_le16(EXT_DAC_REGS+2, 0x0000, par);
- aty_st_le32(CRTC_INT_CNTL, 0x00000000, par);
- aty_st_le32(TIMER_CONFIG, 0x00000000, par);
- aty_st_le32(0xEC, 0x00000000, par);
- aty_st_le32(0xFC, 0x00000000, par);
-
-#if defined (CONFIG_FB_ATY_GENERIC_LCD)
- {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(lcd_tbl); i++)
- aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
- }
-#endif
-
- aty_st_le16(CONFIG_STAT0, 0x00A4, par);
- mdelay(10);
-
- aty_st_8(BUS_CNTL+1, 0xA0, par);
- mdelay(10);
-
- reset_clocks(par, &pll.ct, 1);
- mdelay(10);
-
- // something about power management
- aty_st_8(LCD_INDEX, 0x08, par);
- aty_st_8(LCD_DATA, 0x0A, par);
- aty_st_8(LCD_INDEX, 0x08, par);
- aty_st_8(LCD_DATA+3, 0x02, par);
- aty_st_8(LCD_INDEX, 0x08, par);
- aty_st_8(LCD_DATA, 0x0B, par);
- mdelay(2);
-
- // enable display requests, enable CRTC
- aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);
- // disable display
- aty_st_8(CRTC_GEN_CNTL, 0x40, par);
- // disable display requests, disable CRTC
- aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
- mdelay(10);
-
- aty_st_pll_ct(PLL_YCLK_CNTL, 0x25, par);
-
- aty_st_le16(CUSTOM_MACRO_CNTL, 0x0179, par);
- aty_st_le16(CUSTOM_MACRO_CNTL+2, 0x005E, par);
- aty_st_le16(CUSTOM_MACRO_CNTL+2, card->custom_macro_cntl>>16, par);
- aty_st_8(CUSTOM_MACRO_CNTL+1,
- (card->custom_macro_cntl>>8) & 0xff, par);
-
- aty_st_le32(MEM_ADDR_CONFIG, card->mem_addr_config, par);
- aty_st_le32(MEM_CNTL, card->mem_cntl, par);
- aty_st_le32(EXT_MEM_CNTL, card->ext_mem_cntl, par);
-
- aty_st_8(CONFIG_STAT0, 0xA0 | card->mem_type, par);
-
- aty_st_pll_ct(PLL_YCLK_CNTL, 0x01, par);
- mdelay(15);
- aty_st_pll_ct(PLL_YCLK_CNTL, card->pll_yclk_cntl, par);
- mdelay(1);
-
- reset_clocks(par, &pll.ct, 0);
- mdelay(50);
- reset_clocks(par, &pll.ct, 0);
- mdelay(50);
-
- // enable extended register block
- aty_st_8(BUS_CNTL+3, 0x7B, par);
- mdelay(1);
- // disable extended register block
- aty_st_8(BUS_CNTL+3, 0x73, par);
-
- aty_st_8(CONFIG_STAT0, 0x80 | card->mem_type, par);
-
- // disable display requests, disable CRTC
- aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
- // disable mapping registers in VGA aperture
- aty_st_8(CONFIG_CNTL, aty_ld_8(CONFIG_CNTL, par) & ~0x04, par);
- mdelay(50);
- // enable display requests, enable CRTC
- aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);
-
- // make GPIO's 14,15,16 all inputs
- aty_st_8(LCD_INDEX, 0x07, par);
- aty_st_8(LCD_DATA+3, 0x00, par);
-
- // enable the display
- aty_st_8(CRTC_GEN_CNTL, 0x00, par);
- mdelay(17);
- // reset the memory controller
- aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
- mdelay(15);
- aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
- mdelay(30);
-
- // enable extended register block
- aty_st_8(BUS_CNTL+3,
- (u8)(aty_ld_8(BUS_CNTL+3, par) | 0x08),
- par);
- // set FIFO size to 512 (PIO)
- aty_st_le32(GUI_CNTL,
- aty_ld_le32(GUI_CNTL, par) & ~0x3,
- par);
-
- // enable CRT and disable lcd
- aty_st_8(LCD_INDEX, 0x01, par);
- temp = aty_ld_le32(LCD_DATA, par);
- temp = (temp | 0x01) & ~0x02;
- aty_st_le32(LCD_DATA, temp, par);
- return 0;
-}
-
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2005-11-30 1:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-30 1:27 [PATCH 16/16] atyfb: Remove BIOS-less booting Antonino A. Daplas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).