Re: Cyblafb driver

[Knut Petersen <Knut_Petersen@t-online.de>]

Hi Gareth!

Well, the quality of the video signal is not optimal at 1024x768-32, but
distortions should be hardly noticeable.

Try to keep margins small, this will help a bit (reduced dot clock).

Do you really need 32bpp? The cyberblade/i1 is much faster at 16bpp.

Using a 16bpp mode instead of an otherwise identical 32bpp mode reduces the
internal clock frequency to 50%, thus you will see a _dramatic_ 
improvement in
video signal quality.

What exactly do you mean by "glitches"? I suspect that you see some 
flickering
(fast changes in brightness). Correct?

Have a look at the mainboard. Have a look at2 
http://en.wikipedia.org/wiki/Capacitor_plague.
Are your caps ok? I had to replace some caps on an epia board some weeks 
ago ;-(

>   on a EPIA (duh) with 128mb PC100, P3 Celeron 1.1ghz.
>
>
Don´t know that model, tell me more.

cu,
 Knut


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV