* i810fb fails to load (was: 2.6.20-rc4-mm1) [not found] <20070111222627.66bb75ab.akpm@osdl.org> @ 2007-01-14 23:52 ` Tilman Schmidt 2007-01-15 0:22 ` Andrew Morton 0 siblings, 1 reply; 6+ messages in thread From: Tilman Schmidt @ 2007-01-14 23:52 UTC (permalink / raw) To: Andrew Morton, linux-kernel, linux-fbdev-devel [-- Attachment #1: Type: text/plain, Size: 2502 bytes --] With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my Dell Optiplex GX110. Here's an excerpt of the diff between the boot logs of 2.6.20-rc5 (working) and 2.6.20-rc4-mm1 (non-working): @@ -4,7 +4,7 @@ No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. -<5>Linux version 2.6.20-rc5-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #2 PREEMPT Sun Jan 14 23:37:12 CET 2007 +<5>Linux version 2.6.20-rc4-mm1-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #3 PREEMPT Sun Jan 14 21:08:56 CET 2007 <6>BIOS-provided physical RAM map: <4>sanitize start <4>sanitize end @@ -188,7 +192,6 @@ <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) -<7>PCI: Probing PCI hardware (bus 00) <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 <7>Boot video device is 0000:00:01.0 <4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO @@ -238,20 +241,15 @@ <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Intel 82802 RNG detected -<6>Linux agpgart interface v0.101 (c) Dave Jones +<6>Linux agpgart interface v0.102 (c) Dave Jones <6>agpgart: Detected an Intel i810 E Chipset. <6>agpgart: detected 4MB dedicated video ram. <6>agpgart: AGP aperture is 64M @ 0xf8000000 <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 <7>PCI: setting IRQ 9 as level-triggered <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 -<4>i810-i2c: Probe DDC1 Bus -<4>i810fb_init_pci: DDC probe successful -<4>Console: switching to colour frame buffer device 160x64 -<4>I810FB: fb0 : Intel(R) 810E Framebuffer Device v0.9.0 -<4>I810FB: Video RAM : 4096K -<4>I810FB: Monitor : H: 30-83 KHz V: 55-75 Hz -<4>I810FB: Mode : 1280x1024-8bpp@60Hz +<4>i810fb_alloc_fbmem: can't bind framebuffer memory +<4>i810fb: probe of 0000:00:01.0 failed with error -16 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Please let me know if you need more information. Thanks Tilman -- Tilman Schmidt E-Mail: tilman@imap.cc Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite) [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 253 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: i810fb fails to load (was: 2.6.20-rc4-mm1) 2007-01-14 23:52 ` i810fb fails to load (was: 2.6.20-rc4-mm1) Tilman Schmidt @ 2007-01-15 0:22 ` Andrew Morton 2007-01-22 13:42 ` i810fb fails to load Thomas Hellström 0 siblings, 1 reply; 6+ messages in thread From: Andrew Morton @ 2007-01-15 0:22 UTC (permalink / raw) To: Tilman Schmidt; +Cc: linux-kernel, linux-fbdev-devel, Dave Airlie > On Mon, 15 Jan 2007 00:52:36 +0100 Tilman Schmidt <tilman@imap.cc> wrote: > With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my > Dell Optiplex GX110. Here's an excerpt of the diff between the boot logs > of 2.6.20-rc5 (working) and 2.6.20-rc4-mm1 (non-working): > > @@ -4,7 +4,7 @@ > No module symbols loaded - kernel modules not enabled. > > klogd 1.4.1, log source = ksyslog started. > -<5>Linux version 2.6.20-rc5-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #2 PREEMPT Sun Jan 14 23:37:12 CET 2007 > +<5>Linux version 2.6.20-rc4-mm1-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #3 PREEMPT Sun Jan 14 21:08:56 CET 2007 > <6>BIOS-provided physical RAM map: > <4>sanitize start > <4>sanitize end > @@ -188,7 +192,6 @@ > <6>ACPI: Interpreter enabled > <6>ACPI: Using PIC for interrupt routing > <6>ACPI: PCI Root Bridge [PCI0] (0000:00) > -<7>PCI: Probing PCI hardware (bus 00) > <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > <7>Boot video device is 0000:00:01.0 > <4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO > @@ -238,20 +241,15 @@ > <6>isapnp: No Plug & Play device found > <6>Real Time Clock Driver v1.12ac > <6>Intel 82802 RNG detected > -<6>Linux agpgart interface v0.101 (c) Dave Jones > +<6>Linux agpgart interface v0.102 (c) Dave Jones > <6>agpgart: Detected an Intel i810 E Chipset. > <6>agpgart: detected 4MB dedicated video ram. > <6>agpgart: AGP aperture is 64M @ 0xf8000000 > <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 > <7>PCI: setting IRQ 9 as level-triggered > <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 > -<4>i810-i2c: Probe DDC1 Bus > -<4>i810fb_init_pci: DDC probe successful > -<4>Console: switching to colour frame buffer device 160x64 > -<4>I810FB: fb0 : Intel(R) 810E Framebuffer Device v0.9.0 > -<4>I810FB: Video RAM : 4096K > -<4>I810FB: Monitor : H: 30-83 KHz V: 55-75 Hz > -<4>I810FB: Mode : 1280x1024-8bpp@60Hz > +<4>i810fb_alloc_fbmem: can't bind framebuffer memory > +<4>i810fb: probe of 0000:00:01.0 failed with error -16 > <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > > Please let me know if you need more information. > Don't know. But I bet someone on the Cc does... ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: i810fb fails to load 2007-01-15 0:22 ` Andrew Morton @ 2007-01-22 13:42 ` Thomas Hellström 2007-01-22 18:30 ` Tilman Schmidt 2007-01-22 21:50 ` Dave Airlie 0 siblings, 2 replies; 6+ messages in thread From: Thomas Hellström @ 2007-01-22 13:42 UTC (permalink / raw) To: Tilman Schmidt Cc: Andrew Morton, linux-kernel, linux-fbdev-devel, Dave Airlie [-- Attachment #1: Type: text/plain, Size: 2725 bytes --] Andrew Morton wrote: >> On Mon, 15 Jan 2007 00:52:36 +0100 Tilman Schmidt <tilman@imap.cc> wrote: >> With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my >> Dell Optiplex GX110. Here's an excerpt of the diff between the boot logs >> of 2.6.20-rc5 (working) and 2.6.20-rc4-mm1 (non-working): >> >> @@ -4,7 +4,7 @@ >> No module symbols loaded - kernel modules not enabled. >> >> klogd 1.4.1, log source = ksyslog started. >> -<5>Linux version 2.6.20-rc5-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #2 PREEMPT Sun Jan 14 23:37:12 CET 2007 >> +<5>Linux version 2.6.20-rc4-mm1-noinitrd (ts@gx110) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #3 PREEMPT Sun Jan 14 21:08:56 CET 2007 >> <6>BIOS-provided physical RAM map: >> <4>sanitize start >> <4>sanitize end >> @@ -188,7 +192,6 @@ >> <6>ACPI: Interpreter enabled >> <6>ACPI: Using PIC for interrupt routing >> <6>ACPI: PCI Root Bridge [PCI0] (0000:00) >> -<7>PCI: Probing PCI hardware (bus 00) >> <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 >> <7>Boot video device is 0000:00:01.0 >> <4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO >> @@ -238,20 +241,15 @@ >> <6>isapnp: No Plug & Play device found >> <6>Real Time Clock Driver v1.12ac >> <6>Intel 82802 RNG detected >> -<6>Linux agpgart interface v0.101 (c) Dave Jones >> +<6>Linux agpgart interface v0.102 (c) Dave Jones >> <6>agpgart: Detected an Intel i810 E Chipset. >> <6>agpgart: detected 4MB dedicated video ram. >> <6>agpgart: AGP aperture is 64M @ 0xf8000000 >> <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 >> <7>PCI: setting IRQ 9 as level-triggered >> <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 >> -<4>i810-i2c: Probe DDC1 Bus >> -<4>i810fb_init_pci: DDC probe successful >> -<4>Console: switching to colour frame buffer device 160x64 >> -<4>I810FB: fb0 : Intel(R) 810E Framebuffer Device v0.9.0 >> -<4>I810FB: Video RAM : 4096K >> -<4>I810FB: Monitor : H: 30-83 KHz V: 55-75 Hz >> -<4>I810FB: Mode : 1280x1024-8bpp@60Hz >> +<4>i810fb_alloc_fbmem: can't bind framebuffer memory >> +<4>i810fb: probe of 0000:00:01.0 failed with error -16 >> <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled >> <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> >> Please let me know if you need more information. >> >> > > Don't know. But I bet someone on the Cc does... > Tilman, Thanks for reporting. Can you try the attached patch to see if that fixes the problem. Regards, Thomas Hellström [-- Attachment #2: i810fix.diff --] [-- Type: text/x-patch, Size: 844 bytes --] diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 91c1f36..6ef0960 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -190,6 +190,7 @@ struct agp_memory *agp_create_memory(int return NULL; } new->num_scratch_pages = scratch_pages; + new->type = AGP_NORMAL_MEMORY; return new; } EXPORT_SYMBOL(agp_create_memory); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index b8896c8..5a0713c 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -260,6 +260,7 @@ static int intel_i810_insert_entries(str readl(intel_i810_private.registers+I810_PTE_BASE+((i-1)*4)); break; case AGP_PHYS_MEMORY: + case AGP_NORMAL_MEMORY: if (!mem->is_flushed) global_cache_flush(); for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: i810fb fails to load 2007-01-22 13:42 ` i810fb fails to load Thomas Hellström @ 2007-01-22 18:30 ` Tilman Schmidt 2007-01-22 21:50 ` Dave Airlie 1 sibling, 0 replies; 6+ messages in thread From: Tilman Schmidt @ 2007-01-22 18:30 UTC (permalink / raw) To: Thomas Hellström Cc: Andrew Morton, linux-kernel, linux-fbdev-devel, Dave Airlie [-- Attachment #1: Type: text/plain, Size: 1558 bytes --] Am 22.01.2007 14:42 schrieb Thomas Hellström: >>> On Mon, 15 Jan 2007 00:52:36 +0100 Tilman Schmidt <tilman@imap.cc> wrote: >>> With kernel 2.6.20-rc4-mm1 and all hotfixes, i810fb fails to load on my >>> Dell Optiplex GX110. [...] >> > Can you try the attached patch to see if that fixes the problem. Yes, that patch fixes it. Thanks Tilman > ------------------------------------------------------------------------ > > diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c > index 91c1f36..6ef0960 100644 > --- a/drivers/char/agp/generic.c > +++ b/drivers/char/agp/generic.c > @@ -190,6 +190,7 @@ struct agp_memory *agp_create_memory(int > return NULL; > } > new->num_scratch_pages = scratch_pages; > + new->type = AGP_NORMAL_MEMORY; > return new; > } > EXPORT_SYMBOL(agp_create_memory); > diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c > index b8896c8..5a0713c 100644 > --- a/drivers/char/agp/intel-agp.c > +++ b/drivers/char/agp/intel-agp.c > @@ -260,6 +260,7 @@ static int intel_i810_insert_entries(str > readl(intel_i810_private.registers+I810_PTE_BASE+((i-1)*4)); > break; > case AGP_PHYS_MEMORY: > + case AGP_NORMAL_MEMORY: > if (!mem->is_flushed) > global_cache_flush(); > for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { -- Tilman Schmidt E-Mail: tilman@imap.cc Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite) [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 253 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: i810fb fails to load 2007-01-22 13:42 ` i810fb fails to load Thomas Hellström 2007-01-22 18:30 ` Tilman Schmidt @ 2007-01-22 21:50 ` Dave Airlie 2007-01-23 8:10 ` Thomas Hellström 1 sibling, 1 reply; 6+ messages in thread From: Dave Airlie @ 2007-01-22 21:50 UTC (permalink / raw) To: Thomas Hellström Cc: Tilman Schmidt, Andrew Morton, linux-kernel, linux-fbdev-devel, Dave Airlie > >> > >> > > > > Don't know. But I bet someone on the Cc does... > > > Tilman, > Thanks for reporting. > Can you try the attached patch to see if that fixes the problem. > Hi Thomas, This also fixes X starting on old i810/5 hardware, I had noticed it broken but hadn't had time to investigate it, this patch fixes it... Dave. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: i810fb fails to load 2007-01-22 21:50 ` Dave Airlie @ 2007-01-23 8:10 ` Thomas Hellström 0 siblings, 0 replies; 6+ messages in thread From: Thomas Hellström @ 2007-01-23 8:10 UTC (permalink / raw) To: Dave Airlie Cc: Andrew Morton, linux-fbdev-devel, Dave Airlie, Tilman Schmidt, linux-kernel Dave Airlie wrote: >> >> >> >> >> > >> > Don't know. But I bet someone on the Cc does... >> > >> Tilman, >> Thanks for reporting. >> Can you try the attached patch to see if that fixes the problem. >> > > Hi Thomas, > > This also fixes X starting on old i810/5 hardware, I had noticed it > broken but hadn't had time to investigate it, this patch fixes it... > > Dave. Great. The oldest hardware I have is an i915 which hampers me a bit. /Thomas ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-01-23 8:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20070111222627.66bb75ab.akpm@osdl.org>
2007-01-14 23:52 ` i810fb fails to load (was: 2.6.20-rc4-mm1) Tilman Schmidt
2007-01-15 0:22 ` Andrew Morton
2007-01-22 13:42 ` i810fb fails to load Thomas Hellström
2007-01-22 18:30 ` Tilman Schmidt
2007-01-22 21:50 ` Dave Airlie
2007-01-23 8:10 ` Thomas Hellström
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).