From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nicolas Ferre Subject: [PATCH] atmel_lcdfb: Fix STN LCD support Date: Fri, 15 Jun 2007 10:50:12 +0200 Message-ID: <467252C4.50203@rfo.atmel.com> Reply-To: linux-fbdev-devel@lists.sourceforge.net Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from sc8-sf-mx2-b.sourceforge.net ([10.3.1.92] helo=mail.sourceforge.net) by sc8-sf-list1-new.sourceforge.net with esmtp (Exim 4.43) id 1Hz7WU-0004hx-Jl for linux-fbdev-devel@lists.sourceforge.net; Fri, 15 Jun 2007 01:51:17 -0700 Received: from mail.atmel.fr ([81.80.104.162] helo=atmel-es2.atmel.fr) by mail.sourceforge.net with esmtp (Exim 4.44) id 1Hz7WT-0003nI-O2 for linux-fbdev-devel@lists.sourceforge.net; Fri, 15 Jun 2007 01:51:14 -0700 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-fbdev-devel-bounces@lists.sourceforge.net Errors-To: linux-fbdev-devel-bounces@lists.sourceforge.net To: "Antonino A. Daplas" , linux-fbdev-devel@lists.sourceforge.net Cc: Patrice Vilchez , Andrew Victor , Linux Kernel list From: Nicolas Ferre Fixes STN LCD support for the atmel_lcdfb framebuffer driver. Signed-off-by: Nicolas Ferre --- This patch is the result of a work from Jan Altenberg and has been tested on a Hitachi SP06Q002 on at91sam9261ek. It adds a Kconfig switch that enables the proper LCD in the board configuration file (STN or TFT). This patch includes the "Fix wrong line_length calculation" little one from Jan and Haavard (submitted earlier). AT91 platform informations are directly submitted trough the at91 maintainer and follow in a [RFC] message. drivers/video/Kconfig | 10 +++++ drivers/video/atmel_lcdfb.c | 62 +++++++++++++++++++++++++++++----- 2 files changed, 64 insertions(+), 8 deletions(-) Index: b/drivers/video/atmel_lcdfb.c =================================================================== --- a/drivers/video/atmel_lcdfb.c 2007-06-13 10:55:42.000000000 +0200 +++ b/drivers/video/atmel_lcdfb.c 2007-06-15 10:25:06.000000000 +0200 @@ -79,6 +79,29 @@ .accel = FB_ACCEL_NONE, }; +static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2) +{ + unsigned long value; + + if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000())) + return xres; + + value = xres; + if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) { + /* STN display */ + if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) { + value *= 3; + } + if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4 + || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8 + && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL )) + value = DIV_ROUND_UP(value, 4); + else + value = DIV_ROUND_UP(value, 8); + } + + return value; +} static void atmel_lcdfb_update_dma(struct fb_info *info, struct fb_var_screeninfo *var) @@ -181,6 +204,7 @@ var->xoffset = var->yoffset = 0; switch (var->bits_per_pixel) { + case 1: case 2: case 4: case 8: @@ -228,8 +252,10 @@ static int atmel_lcdfb_set_par(struct fb_info *info) { struct atmel_lcdfb_info *sinfo = info->par; + unsigned long hozval_linesz; unsigned long value; unsigned long clk_value_khz; + unsigned long bits_per_line; dev_dbg(info->device, "%s:\n", __func__); dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n", @@ -241,12 +267,15 @@ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); - if (info->var.bits_per_pixel <= 8) + if (info->var.bits_per_pixel == 1) + info->fix.visual = FB_VISUAL_MONO01; + else if (info->var.bits_per_pixel <= 8) info->fix.visual = FB_VISUAL_PSEUDOCOLOR; else info->fix.visual = FB_VISUAL_TRUECOLOR; - info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8); + bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel; + info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8); /* Re-initialize the DMA engine... */ dev_dbg(info->device, " * update DMA engine\n"); @@ -262,18 +291,21 @@ /* Set pixel clock */ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; - value = clk_value_khz / PICOS2KHZ(info->var.pixclock); - - if (clk_value_khz % PICOS2KHZ(info->var.pixclock)) - value++; + value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); value = (value / 2) - 1; + dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value); if (value <= 0) { dev_notice(info->device, "Bypassing pixel clock divider\n"); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); - } else + } else { lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); + info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1))); + dev_dbg(info->device, " updated pixclk: %lu KHz\n", + PICOS2KHZ(info->var.pixclock)); + } + /* Initialize control register 2 */ value = sinfo->default_lcdcon2; @@ -311,9 +343,14 @@ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); + /* Horizontal value (aka line size) */ + hozval_linesz = compute_hozval(info->var.xres, + lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2)); + /* Display size */ - value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET; + value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET; value |= info->var.yres - 1; + dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value); /* FIFO Threshold: Use formula from data sheet */ @@ -421,6 +458,15 @@ ret = 0; } break; + + case FB_VISUAL_MONO01: + if (regno < 2) { + val = (regno == 0) ? 0x00 : 0x1F; + lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val); + ret = 0; + } + break; + } return ret; Index: b/drivers/video/Kconfig =================================================================== --- a/drivers/video/Kconfig 2007-05-14 11:02:16.000000000 +0200 +++ b/drivers/video/Kconfig 2007-06-13 11:04:10.000000000 +0200 @@ -701,6 +701,16 @@ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want to let frame buffer in external SDRAM. +config FB_ATMEL_STN + bool "Use a STN display with AT91/AT32 LCD Controller" + depends on FB_ATMEL && ARCH_AT91SAM9261 + default n + help + Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD + Controller. Say N if you want to connect a TFT. + + If unsure, say N. + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI -- Nicolas Ferre ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/