* [PATCH] pm2fb: mtrr support and noaccel option
@ 2007-06-17 20:21 Krzysztof Helt
0 siblings, 0 replies; only message in thread
From: Krzysztof Helt @ 2007-06-17 20:21 UTC (permalink / raw)
To: Linux Fbdev development list
[-- Attachment #1: Type: text/plain, Size: 3204 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
--- linux-2.6.21.old/drivers/video/pm2fb.c 2007-06-06 18:44:49.000000000 +0200
+++ linux-2.6.21/drivers/video/pm2fb.c 2007-06-17 21:54:16.009433094 +0200
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;
* these flags allow the user to specify that requests for +ve sync
* should be silently turned in -ve sync.
*/
-static int lowhsync;
-static int lowvsync;
+static int lowhsync __devinitdata;
+static int lowvsync __devinitdata;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
/*
* The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
u32 mem_control; /* MemControl reg at probe */
u32 boot_address; /* BootAddress reg at probe */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1316,6 +1325,14 @@ static int __devinit pm2fb_probe(struct
goto err_exit_mmio;
}
+#ifdef CONFIG_MTRR
+ if (!nomtrr)
+ default_par->mtrr_handle =
+ mtrr_add(pm2fb_fix.smem_start,
+ pm2fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+#endif
+
info->fbops = &pm2fb_ops;
info->fix = pm2fb_fix;
info->pseudo_palette = default_par->palette;
@@ -1324,6 +1341,11 @@ static int __devinit pm2fb_probe(struct
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (!mode)
mode = "640x480@60";
@@ -1375,6 +1397,11 @@ static void __devexit pm2fb_remove(struc
unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
@@ -1430,6 +1457,12 @@ static int __init pm2fb_setup(char *opti
lowhsync = 1;
} else if(!strcmp(this_opt, "lowvsync")) {
lowvsync = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
} else {
mode = this_opt;
}
@@ -1474,6 +1507,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
module_param(lowvsync, bool, 0);
MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
[-- Attachment #2: pm2fb-mtrr.diff --]
[-- Type: text/plain, Size: 3204 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
--- linux-2.6.21.old/drivers/video/pm2fb.c 2007-06-06 18:44:49.000000000 +0200
+++ linux-2.6.21/drivers/video/pm2fb.c 2007-06-17 21:54:16.009433094 +0200
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;
* these flags allow the user to specify that requests for +ve sync
* should be silently turned in -ve sync.
*/
-static int lowhsync;
-static int lowvsync;
+static int lowhsync __devinitdata;
+static int lowvsync __devinitdata;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
/*
* The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
u32 mem_control; /* MemControl reg at probe */
u32 boot_address; /* BootAddress reg at probe */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1316,6 +1325,14 @@ static int __devinit pm2fb_probe(struct
goto err_exit_mmio;
}
+#ifdef CONFIG_MTRR
+ if (!nomtrr)
+ default_par->mtrr_handle =
+ mtrr_add(pm2fb_fix.smem_start,
+ pm2fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+#endif
+
info->fbops = &pm2fb_ops;
info->fix = pm2fb_fix;
info->pseudo_palette = default_par->palette;
@@ -1324,6 +1341,11 @@ static int __devinit pm2fb_probe(struct
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (!mode)
mode = "640x480@60";
@@ -1375,6 +1397,11 @@ static void __devexit pm2fb_remove(struc
unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
@@ -1430,6 +1457,12 @@ static int __init pm2fb_setup(char *opti
lowhsync = 1;
} else if(!strcmp(this_opt, "lowvsync")) {
lowvsync = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
} else {
mode = this_opt;
}
@@ -1474,6 +1507,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
module_param(lowvsync, bool, 0);
MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
[-- Attachment #3: Type: text/plain, Size: 286 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
[-- Attachment #4: Type: text/plain, Size: 182 bytes --]
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-06-17 20:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-17 20:21 [PATCH] pm2fb: mtrr support and noaccel option Krzysztof Helt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).