From: "Antonino A. Daplas" <adaplas@gmail.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Linux Fbdev development list <linux-fbdev-devel@lists.sourceforge.net>
Subject: [PATCH 15/20] cirrusfb: code improvement 2nd part
Date: Sun, 26 Aug 2007 22:08:04 +0800 [thread overview]
Message-ID: <46D18944.5030908@gmail.com> (raw)
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch removes:
- redundant fields from the cirrusfb_regs structure
- one redundant header
- fixes two includes ("" to <>)
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
---
drivers/video/cirrusfb.c | 45 +++++++++++++++------------------------------
1 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 7ae14e9..a250082 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -45,7 +45,6 @@ #include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
-#include <linux/selection.h>
#include <asm/pgtable.h>
#ifdef CONFIG_ZORRO
@@ -64,8 +63,8 @@ #else
#define isPReP 0
#endif
-#include "video/vga.h"
-#include "video/cirrus.h"
+#include <video/vga.h>
+#include <video/cirrus.h>
/*****************************************************************
*
@@ -99,9 +98,6 @@ #define assert(expr)
#endif
#define MB_ (1024 * 1024)
-#define KB_ (1024)
-
-#define MAX_NUM_BOARDS 7
/*****************************************************************
*
@@ -331,10 +327,6 @@ static const struct {
#endif /* CONFIG_ZORRO */
struct cirrusfb_regs {
- __u32 line_length; /* in BYTES! */
- __u32 visual;
- __u32 type;
-
long freq;
long nom;
long den;
@@ -525,7 +517,7 @@ static struct fb_ops cirrusfb_ops = {
/*--- Hardware Specific Routines -------------------------------------------*/
static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
struct cirrusfb_regs *regs,
- const struct fb_info *info);
+ struct fb_info *info);
/*--- Internal routines ----------------------------------------------------*/
static void init_vgachip(struct fb_info *info);
static void switch_monitor(struct cirrusfb_info *cinfo, int on);
@@ -792,7 +784,7 @@ static int cirrusfb_check_var(struct fb_
static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
struct cirrusfb_regs *regs,
- const struct fb_info *info)
+ struct fb_info *info)
{
long freq;
long maxclock;
@@ -803,20 +795,20 @@ static int cirrusfb_decode_var(const str
switch (var->bits_per_pixel) {
case 1:
- regs->line_length = var->xres_virtual / 8;
- regs->visual = FB_VISUAL_MONO10;
+ info->fix.line_length = var->xres_virtual / 8;
+ info->fix.visual = FB_VISUAL_MONO10;
break;
case 8:
- regs->line_length = var->xres_virtual;
- regs->visual = FB_VISUAL_PSEUDOCOLOR;
+ info->fix.line_length = var->xres_virtual;
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 16:
case 24:
case 32:
- regs->line_length = var->xres_virtual * maxclockidx;
- regs->visual = FB_VISUAL_DIRECTCOLOR;
+ info->fix.line_length = var->xres_virtual * maxclockidx;
+ info->fix.visual = FB_VISUAL_DIRECTCOLOR;
break;
default:
@@ -826,7 +818,7 @@ static int cirrusfb_decode_var(const str
break;
}
- regs->type = FB_TYPE_PACKED_PIXELS;
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
/* convert from ps to kHz */
freq = PICOS2KHZ(var->pixclock);
@@ -1539,9 +1531,6 @@ #endif
DPRINTK("CL_SEQR1: %d\n", tmp);
cinfo->currentmode = regs;
- info->fix.type = regs.type;
- info->fix.visual = regs.visual;
- info->fix.line_length = regs.line_length;
/* pan to requested offset */
cirrusfb_pan_display(var, info);
@@ -1622,7 +1611,7 @@ static int cirrusfb_pan_display(struct f
xoffset = var->xoffset * info->var.bits_per_pixel / 8;
yoffset = var->yoffset;
- base = yoffset * cinfo->currentmode.line_length + xoffset;
+ base = yoffset * info->fix.line_length + xoffset;
if (info->var.bits_per_pixel == 1) {
/* base is already correct */
@@ -2081,7 +2070,7 @@ static void cirrusfb_fillrect(struct fb_
(region->dx * m) / 8, region->dy,
(region->width * m) / 8, region->height,
color,
- cinfo->currentmode.line_length);
+ info->fix.line_length);
}
static void cirrusfb_copyarea(struct fb_info *info,
@@ -2121,7 +2110,7 @@ static void cirrusfb_copyarea(struct fb_
(area->sx * m) / 8, area->sy,
(area->dx * m) / 8, area->dy,
(area->width * m) / 8, area->height,
- cinfo->currentmode.line_length);
+ info->fix.line_length);
}
@@ -2281,13 +2270,10 @@ static int cirrusfb_set_fbinfo(struct fb
info->fix.smem_len = info->screen_size;
if (var->bits_per_pixel == 1)
info->fix.smem_len /= 4;
- info->fix.type = cinfo->currentmode.type;
info->fix.type_aux = 0;
- info->fix.visual = cinfo->currentmode.visual;
info->fix.xpanstep = 1;
info->fix.ypanstep = 1;
info->fix.ywrapstep = 0;
- info->fix.line_length = cinfo->currentmode.line_length;
/* FIXME: map region at 0xB8000 if available, fill in here */
info->fix.mmio_len = 0;
@@ -2446,7 +2432,7 @@ #endif
cinfo->unmap = cirrusfb_pci_unmap;
printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ",
- info->screen_size / KB_, board_addr);
+ info->screen_size >> 10, board_addr);
printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n");
pci_set_drvdata(pdev, info);
@@ -2520,7 +2506,6 @@ static int cirrusfb_zorro_register(struc
}
cinfo = info->par;
- cinfo->info = info;
cinfo->btype = btype;
assert(z > 0);
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
reply other threads:[~2007-08-26 15:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46D18944.5030908@gmail.com \
--to=adaplas@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).