From: "Krzysztof Helt" <krzysztof.h1@wp.pl>
To: linux-fbdev-devel <linux-fbdev-devel@lists.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH] tridentfb: improve clock setting accuracy
Date: Fri, 02 May 2008 11:19:01 +0200 [thread overview]
Message-ID: <481adc85b18f4@wp.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 2733 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch improves clock calculation precision (to kHz from MHz)
and removes parameter field vclk from the tridentfb_par structure.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
If the patch below is mangled, another copy is attached.
diff -urp linux-old/drivers/video/tridentfb.c
linux-pc/drivers/video/tridentfb.c
--- linux-old/drivers/video/tridentfb.c 2008-05-01 11:19:02.000000000
+0200
+++ linux-pc/drivers/video/tridentfb.c 2008-05-01 14:28:19.000000000 +0200
@@ -27,7 +27,6 @@
#define VERSION "0.7.8-NEWAPI"
struct tridentfb_par {
- int vclk; /* in MHz */
void __iomem *io_virt; /* iospace virtual memory address */
};
@@ -669,27 +668,26 @@ static void set_screen_start(int base)
(read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
}
-/* Use 20.12 fixed-point for NTSC value and frequency calculation */
-#define calc_freq(n, m, k) ( ((unsigned long)0xE517 * (n + 8) / ((m +
2) * (1 << k))) >> 12 )
-
/* Set dotclock frequency */
-static void set_vclk(int freq)
+static void set_vclk(unsigned long freq)
{
int m, n, k;
- int f, fi, d, di;
+ unsigned long f, fi, d, di;
unsigned char lo = 0, hi = 0;
- d = 20;
+ d = 20000;
for (k = 2; k >= 0; k--)
for (m = 0; m < 63; m++)
for (n = 0; n < 128; n++) {
- fi = calc_freq(n, m, k);
+ fi = ((14318l * (n + 8)) / (m + 2)) >> k;
if ((di = abs(fi - freq)) < d) {
d = di;
f = fi;
lo = n;
hi = (k << 6) | m;
}
+ if (fi > freq)
+ break;
}
if (chip3D) {
write3C4(ClockHigh, hi);
@@ -888,6 +886,8 @@ static int tridentfb_set_par(struct fb_i
struct fb_var_screeninfo *var = &info->var;
int bpp = var->bits_per_pixel;
unsigned char tmp;
+ unsigned long vclk;
+
debug("enter\n");
hdispend = var->xres / 8 - 1;
hsyncstart = (var->xres + var->right_margin) / 8;
@@ -1015,11 +1015,11 @@ static int tridentfb_set_par(struct fb_i
write3X4(Performance, 0x92);
write3X4(PCIReg, 0x07); /* MMIO & PCI read and write burst enable */
- /* convert from picoseconds to MHz */
- par->vclk = 1000000 / info->var.pixclock;
+ /* convert from picoseconds to kHz */
+ vclk = PICOS2KHZ(info->var.pixclock);
if (bpp == 32)
- par->vclk *= 2;
- set_vclk(par->vclk);
+ vclk *= 2;
+ set_vclk(vclk);
write3C4(0, 3);
write3C4(1, 1); /* set char clock 8 dots wide */
----------------------------------------------------
Nigdy nie spojrzały sobie prosto w oczy.
Nigdy nie spędziły osobno nawet jednej chwili. Siostry.
Wspaniała opowieść o byciu naprawdę razem!
http://klik.wp.pl/?adr=http%3A%2F%2Fcorto.www.wp.pl%2Fas%2Fsiostry.html&sid=336
[-- Attachment #2: tridentfb-vclk-khz.diff --]
[-- Type: application/octet-stream, Size: 2300 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch improves clock calculation precision (to kHz from MHz)
and removes parameter field vclk from the tridentfb_par structure.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
diff -urp linux-old/drivers/video/tridentfb.c linux-pc/drivers/video/tridentfb.c
--- linux-old/drivers/video/tridentfb.c 2008-05-01 11:19:02.000000000 +0200
+++ linux-pc/drivers/video/tridentfb.c 2008-05-01 14:28:19.000000000 +0200
@@ -27,7 +27,6 @@
#define VERSION "0.7.8-NEWAPI"
struct tridentfb_par {
- int vclk; /* in MHz */
void __iomem *io_virt; /* iospace virtual memory address */
};
@@ -669,27 +668,26 @@ static void set_screen_start(int base)
(read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
}
-/* Use 20.12 fixed-point for NTSC value and frequency calculation */
-#define calc_freq(n, m, k) ( ((unsigned long)0xE517 * (n + 8) / ((m + 2) * (1 << k))) >> 12 )
-
/* Set dotclock frequency */
-static void set_vclk(int freq)
+static void set_vclk(unsigned long freq)
{
int m, n, k;
- int f, fi, d, di;
+ unsigned long f, fi, d, di;
unsigned char lo = 0, hi = 0;
- d = 20;
+ d = 20000;
for (k = 2; k >= 0; k--)
for (m = 0; m < 63; m++)
for (n = 0; n < 128; n++) {
- fi = calc_freq(n, m, k);
+ fi = ((14318l * (n + 8)) / (m + 2)) >> k;
if ((di = abs(fi - freq)) < d) {
d = di;
f = fi;
lo = n;
hi = (k << 6) | m;
}
+ if (fi > freq)
+ break;
}
if (chip3D) {
write3C4(ClockHigh, hi);
@@ -888,6 +886,8 @@ static int tridentfb_set_par(struct fb_i
struct fb_var_screeninfo *var = &info->var;
int bpp = var->bits_per_pixel;
unsigned char tmp;
+ unsigned long vclk;
+
debug("enter\n");
hdispend = var->xres / 8 - 1;
hsyncstart = (var->xres + var->right_margin) / 8;
@@ -1015,11 +1015,11 @@ static int tridentfb_set_par(struct fb_i
write3X4(Performance, 0x92);
write3X4(PCIReg, 0x07); /* MMIO & PCI read and write burst enable */
- /* convert from picoseconds to MHz */
- par->vclk = 1000000 / info->var.pixclock;
+ /* convert from picoseconds to kHz */
+ vclk = PICOS2KHZ(info->var.pixclock);
if (bpp == 32)
- par->vclk *= 2;
- set_vclk(par->vclk);
+ vclk *= 2;
+ set_vclk(vclk);
write3C4(0, 3);
write3C4(1, 1); /* set char clock 8 dots wide */
[-- Attachment #3: Type: text/plain, Size: 320 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
[-- Attachment #4: Type: text/plain, Size: 182 bytes --]
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
reply other threads:[~2008-05-02 9:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481adc85b18f4@wp.pl \
--to=krzysztof.h1@wp.pl \
--cc=akpm@linux-foundation.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).