From: Eric Miao <eric.y.miao@gmail.com>
To: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: ymiao3@marvell.com, linux-fbdev-devel@lists.sourceforge.net,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: Re: [RFC 2.6.26-rc3 04/10] pxafb: add exit and remove handlers
Date: Fri, 13 Jun 2008 09:24:50 +0800 [thread overview]
Message-ID: <4851CC62.8000008@gmail.com> (raw)
In-Reply-To: <1213289961-1562-5-git-send-email-jayakumar.lkml@gmail.com>
Jaya Kumar wrote:
> This patch adds exit and remove handlers to pxafb so that it can be loaded
> and unloaded as a module.
>
> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
> ---
> drivers/video/pxafb.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
> index b891aac..89f1b48 100644
> --- a/drivers/video/pxafb.c
> +++ b/drivers/video/pxafb.c
> @@ -1790,11 +1790,49 @@ failed:
> return ret;
> }
>
> +static int __devexit pxafb_remove(struct platform_device *dev)
> +{
> + struct pxafb_info *fbi = platform_get_drvdata(dev);
> + struct resource *r;
> + int irq;
> + struct fb_info *info;
> +
> + if (!fbi)
> + return 0;
> +
> + info = &fbi->fb;
> +
> + unregister_framebuffer(info);
> +
> + pxafb_disable_controller(fbi);
> +
> + if (fbi->fb.cmap.len)
> + fb_dealloc_cmap(&fbi->fb.cmap);
> +
> + irq = platform_get_irq(dev, 0);
> + free_irq(irq, fbi);
> +
> + dma_free_writecombine(&dev->dev, fbi->map_size,
> + fbi->map_cpu, fbi->map_dma);
> +
> + iounmap(fbi->mmio_base);
> +
> + r = platform_get_resource(dev, IORESOURCE_MEM, 0);
> + release_mem_region(r->start, r->end - r->start + 1);
> +
> + clk_put(fbi->clk);
> + kfree(fbi);
> +
> + return 0;
> +}
> +
> static struct platform_driver pxafb_driver = {
> .probe = pxafb_probe,
> + .remove = pxafb_remove,
> .suspend = pxafb_suspend,
> .resume = pxafb_resume,
> .driver = {
> + .owner = THIS_MODULE,
> .name = "pxa2xx-fb",
> },
> };
> @@ -1807,7 +1845,13 @@ static int __init pxafb_init(void)
> return platform_driver_register(&pxafb_driver);
> }
>
> +static void __exit pxafb_exit(void)
> +{
> + platform_driver_unregister(&pxafb_driver);
> +}
> +
> module_init(pxafb_init);
> +module_exit(pxafb_exit);
>
> MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
> MODULE_LICENSE("GPL");
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
next prev parent reply other threads:[~2008-06-13 1:24 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-12 16:59 [RFC 2.6.26-rc3 0/10] am200epd, pxafb, metronomefb changes v4 Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 01/10] pxafb: fix ifdef for command line option handling Jaya Kumar
[not found] ` <20080612203541.0baa5586.krzysztof.h1@poczta.fm>
2008-06-13 1:22 ` Eric Miao
2008-06-13 7:37 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 02/10] pxafb: cleanup and fix order of failure handling Jaya Kumar
2008-06-12 18:36 ` Krzysztof Helt
2008-06-13 1:23 ` Eric Miao
2008-06-13 7:37 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 03/10] pxafb: fix __devinit/exit annotations Jaya Kumar
2008-06-12 18:36 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-13 1:24 ` Eric Miao
2008-06-13 7:38 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 04/10] pxafb: add exit and remove handlers Jaya Kumar
2008-06-12 18:37 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-13 1:24 ` Eric Miao [this message]
2008-06-13 7:39 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 05/10] pxafb: add shared framebuffer interface Jaya Kumar
2008-06-15 6:26 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-15 6:49 ` Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 06/10] gumstix: conversion to MFP support and add bluetooth support Jaya Kumar
2008-06-13 2:01 ` Eric Miao
2008-06-15 5:51 ` Jaya Kumar
2008-06-16 2:21 ` Eric Miao
2008-07-04 5:01 ` Jaya Kumar
2008-07-08 0:52 ` Jaya Kumar
2008-06-13 7:42 ` Russell King - ARM Linux
2008-06-15 5:54 ` Jaya Kumar
2008-07-31 9:04 ` Andrew Morton
2008-06-12 16:59 ` [RFC 2.6.26-rc3 07/10] am200epd: move am200epd to mach-pxa Jaya Kumar
2008-06-13 2:12 ` Eric Miao
2008-06-15 6:23 ` Jaya Kumar
2008-06-16 2:29 ` Eric Miao
2008-06-12 16:59 ` [RFC 2.6.26-rc3 08/10] am200epd: convert to shared fb and use gpio api Jaya Kumar
2008-06-13 2:20 ` Eric Miao
2008-06-15 6:42 ` Jaya Kumar
2008-06-16 2:35 ` Eric Miao
2008-07-08 12:43 ` Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 09/10] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-06-13 2:22 ` Eric Miao
2008-06-12 16:59 ` [RFC 2.6.26-rc3 10/10] metronomefb: changes to use separate framebuffer Jaya Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4851CC62.8000008@gmail.com \
--to=eric.y.miao@gmail.com \
--cc=jayakumar.lkml@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=ymiao3@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).