[PATCH 2/4] video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver part 2/3

[PATCH 2/4] video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver part 2/3

[Nobuhiro Iwamatsu]

Header file of driver for the LCDC interface on the SH7760 and SH7763 SoCs.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
---
 include/asm-sh/sh7760fb.h |  133 +++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 133 insertions(+), 0 deletions(-)
 create mode 100644 include/asm-sh/sh7760fb.h

diff --git a/include/asm-sh/sh7760fb.h b/include/asm-sh/sh7760fb.h
new file mode 100644
index 0000000..3f9b92e
--- /dev/null
+++ b/include/asm-sh/sh7760fb.h
@@ -0,0 +1,133 @@
+/*
+ * sh7760fb.h -- platform data for SH7760 LCDC framebuffer driver.
+ *
+ * (c) 2006 - 2008 Manuel Lauss.
+ */
+
+#ifndef _ASM_SH_SH7760FB_H
+#define _ASM_SH_SH7760FB_H
+
+/* HSYNC polarity inversion */
+#define LDMTR_FLMPOL		(1 << 15)
+
+/* VSYNC polarity inversion */
+#define LDMTR_CL1POL		(1 << 14)
+
+/* DISPLAY-ENABLE polarity inversion */
+#define LDMTR_DISPEN_LOWACT	(1 << 13)
+
+/* DISPLAY DATA BUS polarity inversion */
+#define LDMTR_DPOL_LOWACT	(1 << 12)
+
+/* AC modulation signal enable */
+#define LDMTR_MCNT		(1 << 10)
+
+/* Disable output of HSYNC during VSYNC period */
+#define LDMTR_CL1CNT		(1 << 9)
+
+/* Disable output of VSYNC during VSYNC period */
+#define LDMTR_CL2CNT		(1 << 8)
+
+/* Display types supported by the LCDC */
+#define LDMTR_STN_MONO_4	0x00
+#define LDMTR_STN_MONO_8	0x01
+#define LDMTR_STN_COLOR_4	0x08
+#define LDMTR_STN_COLOR_8	0x09
+#define LDMTR_STN_COLOR_12	0x0A
+#define LDMTR_STN_COLOR_16	0x0B
+#define LDMTR_DSTN_MONO_8	0x11
+#define LDMTR_DSTN_MONO_16	0x13
+#define LDMTR_DSTN_COLOR_8	0x19
+#define LDMTR_DSTN_COLOR_12	0x1A
+#define LDMTR_DSTN_COLOR_16	0x1B
+#define LDMTR_TFT_COLOR_16	0x2B
+
+/* framebuffer color layout */
+#define LDDFR_1BPP_MONO		0x00
+#define LDDFR_2BPP_MONO		0x01
+#define LDDFR_4BPP_MONO		0x02
+#define LDDFR_6BPP_MONO		0x04
+#define LDDFR_4BPP		0x0A
+#define LDDFR_8BPP		0x0C
+#define LDDFR_16BPP_RGB555	0x1D
+#define LDDFR_16BPP_RGB565	0x2D
+
+/* LCDC Pixclock sources */
+#define LCDC_CLKSRC_BUSCLOCK	0
+#define LCDC_CLKSRC_PERIPHERAL	1
+#define LCDC_CLKSRC_EXTERNAL	2
+
+#define LDICKR_CLKSRC(x)	\
+	(((x) & 3) << 12)
+
+/* LCDC pixclock input divider. Set to 1 at a minimum! */
+#define LDICKR_CLKDIV(x)	\
+	((x) & 0x1f)
+
+struct sh7760fb_platdata {
+
+	/* Set this member to a valid fb_videmode for the display you
+	 * wish to use.  The following members must be initialized:
+	 * xres, yres, hsync_len, vsync_len, sync,
+	 * {left,right,upper,lower}_margin.
+	 * The driver uses the above members to calculate register values
+	 * and memory requirements. Other members are ignored but may
+	 * be used by other framebuffer layer components.
+	 */
+	struct	fb_videomode *def_mode;
+
+	/* LDMTR includes display type and signal polarity.  The
+	 * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
+	 * data above; however the polarities of the following signals
+	 * must be encoded in the ldmtr member:
+	 * Display Enable signal (default high-active)	DISPEN_LOWACT
+	 * Display Data signals (default high-active)	DPOL_LOWACT
+	 * AC Modulation signal (default off)		MCNT
+	 * Hsync-During-Vsync suppression (default off)	CL1CNT
+	 * Vsync-during-vsync suppression (default off) CL2CNT
+	 * NOTE: also set a display type!
+	 * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
+	 */
+	u16	ldmtr;
+
+	/* LDDFR controls framebuffer image format (depth, organization)
+	 * Use ONE of the LDDFR_?BPP_* macros!
+	 */
+	u16	lddfr;
+
+	/* LDPMMR and LDPSPR control the timing of the power signals
+	 * for the display. Please read the SH7760 Hardware Manual,
+	 * Chapters 30.3.17, 30.3.18 and 30.4.6!
+	 */
+	u16	ldpmmr;
+	u16	ldpspr;
+
+	/* LDACLNR contains the line numbers after which the AC modulation
+	 * signal is to toggle. Set to ZERO for TFTs or displays which
+	 * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
+	 */
+	u16	ldaclnr;
+
+	/* LDICKR contains information on pixelclock source and config.
+	 * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
+	 * minimal value for CLKDIV() must be 1!.
+	 */
+	u16	ldickr;
+
+	/* set this member to 1 if you wish to use the LCDC's hardware
+	 * rotation function.  This is limited to displays <= 320x200
+	 * pixels resolution!
+	 */
+	int	rotate;		/* set to 1 to rotate 90 CCW */
+
+	/* set this to 1 to suppress vsync irq use. */
+	int	novsync;
+
+	/* blanking hook for platform. Set this if your platform can do
+	 * more than the LCDC in terms of blanking (e.g. disable clock
+	 * generator / backlight power supply / etc.
+	 */
+	void(*blank)(int);
+};
+
+#endif /* _ASM_SH_SH7760FB_H */
-- 
1.5.5.1


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php