linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Takashi Yoshii <yoshii.takashi@renesas.com>
To: "Ville Syrjälä" <syrjala@sci.fi>,
	linux-fbdev-devel@lists.sourceforge.net
Subject: [PATCH] Add fb_check_var() for fixed mode device.
Date: Fri, 29 Aug 2008 14:15:06 +0900	[thread overview]
Message-ID: <48B785DA.1030408@renesas.com> (raw)
In-Reply-To: <20080828074521.GO16680@sci.fi>

Sounds good.
> 4. Provide a generic check_var() that does some basic sanity checking
> against info->var (eg. check xres, yres and bits_per_pixel).
How about this.
Any comments? Expecially about what to check, what to restore.

Cheers,
/yoshii # Restoring pixclock would be a workaround for Xorg issue :)

drivers/video/fbmem.c:fb_check_var()
 New function for fixed mode device which doesn't provide its own
 check_var function.

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index c6b8e92..ff94eaf 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -904,6 +904,56 @@ static int fb_check_caps(struct fb_info *info, struct fb_var_screeninfo *var,
 	return err;
 }
 
+/* Sanity check for drivers which can't change video mode */
+static int
+fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct fb_var_screeninfo *constant = &info->var;
+        __u32 xoffset = var->xoffset;
+	__u32 yoffset = var->yoffset;
+	__u32 activate = var->activate;
+	__u32 yres = (constant->vmode & FB_VMODE_YWRAP)? 0: var->yres; 
+
+	/* do round _up_ */
+	if (var->xres_virtual < xoffset + var->xres)
+		var->xres_virtual = xoffset + var->xres;
+	if (var->yres_virtual < yoffset + yres)
+		var->yres_virtual = yoffset + yres;
+
+	/* bigger is error, smaller is OK */
+	if( ( var->xres > constant->xres )
+	  ||( var->yres > constant->yres )
+	  ||( var->xres_virtual > constant->xres_virtual )
+	  ||( var->yres_virtual > constant->yres_virtual ))
+		return -EINVAL;
+
+	/* only length are checked for bitfields */
+	if( ( var->bits_per_pixel > constant->bits_per_pixel )
+	  ||( var->red.length > constant->red.length )
+	  ||( var->green.length > constant->green.length )
+	  ||( var->blue.length > constant->blue.length ))
+		return -EINVAL;
+
+	/* boolean parameters can't be rounded, should be equal */
+	if( ( !var->grayscale != !constant->grayscale )
+	  ||( !var->nonstd != !constant->nonstd )
+	  ||( var->vmode != constant->vmode ))
+		return -EINVAL;
+
+	/* pan is acceptable only if we have fb_pan_display) */
+	if ( (var->yoffset || var->xoffset) && !info->fbops->fb_pan_display )
+		return -EINVAL;
+
+	/* copy most */
+	*var = *constant;
+	/* resotore some that are not a part of viede mode */
+	var->xoffset = xoffset;
+	var->yoffset = yoffset;
+	var->activate = activate;
+
+	return 0;
+}
+
 int
 fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 {
@@ -940,9 +990,11 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 
 		if (info->fbops->fb_check_var) {
 			ret = info->fbops->fb_check_var(var, info);
-			if (ret)
-				goto done;
-		}
+		} else
+			ret = fb_check_var(var, info);
+
+		if (ret)
+			goto done;
 
 		if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) {
 			struct fb_videomode mode;


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/

  parent reply	other threads:[~2008-08-29  5:15 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-27  5:09 [PATCH] Do set var even if no fb_check_var() provided Takashi Yoshii
2008-08-27  7:08 ` Geert Uytterhoeven
2008-08-27 21:49   ` Helge Deller
2008-08-28  6:53     ` Michel Dänzer
2008-08-28 21:43       ` Helge Deller
2008-08-28 22:08         ` Michel Dänzer
2008-08-28 22:16           ` Helge Deller
2008-08-28 22:18             ` Michel Dänzer
2008-08-28 22:23               ` Helge Deller
2008-08-28 22:30                 ` Michel Dänzer
2008-08-28 22:35                   ` Helge Deller
2008-08-28 22:47                     ` Michel Dänzer
2008-08-28  7:45     ` Ville Syrjälä
2008-08-28 21:45       ` Helge Deller
2008-08-29  5:15       ` Takashi Yoshii [this message]
2008-08-29  7:07         ` [PATCH] Add fb_check_var() for fixed mode device Michel Dänzer
2008-08-29  7:48           ` Takashi Yoshii
2008-08-29  7:10         ` Geert Uytterhoeven
2008-09-04  1:56           ` Takashi Yoshii
2008-08-29  8:49         ` Michel Dänzer
2008-08-29 12:16           ` Geert Uytterhoeven
2008-08-29 13:51             ` Michel Dänzer
2008-08-29 14:14               ` Geert Uytterhoeven
2008-08-29 14:23                 ` Michel Dänzer
2008-08-30  8:58                   ` Helge Deller
2008-09-02 19:11                     ` Helge Deller
2008-09-03 10:11                       ` Michel Dänzer
2008-09-03 19:24                         ` Helge Deller
2008-09-04  7:21                       ` Takashi Yoshii
2008-08-29 17:38             ` Ville Syrjälä
2008-08-29  2:06   ` [PATCH] Do set var even if no fb_check_var() provided Takashi Yoshii
2008-08-29  7:03     ` Geert Uytterhoeven
2008-09-04  7:38       ` Takashi Yoshii

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48B785DA.1030408@renesas.com \
    --to=yoshii.takashi@renesas.com \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    --cc=syrjala@sci.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).