From: Mike Rapoport <mike@compulab.co.il>
To: eric miao <eric.miao@marvell.com>
Cc: linux-fbdev-devel@lists.sourceforge.net,
ARM Linux <linux-arm-kernel@lists.arm.linux.org.uk>
Subject: [PATCH 1/2] lcd: add support for Toppoly TDO35S series to tdo24m driver
Date: Thu, 27 Nov 2008 13:23:53 +0200 [thread overview]
Message-ID: <492E8349.40309@compulab.co.il> (raw)
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 4a4dd9a..7ee2313 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -52,11 +52,11 @@ config LCD_ILI9320
then say y to include a power driver for it.
config LCD_TDO24M
- tristate "Toppoly TDO24M LCD Panels support"
+ tristate "Toppoly TDO24M and TDO35S LCD Panels support"
depends on LCD_CLASS_DEVICE && SPI_MASTER
default n
help
- If you have a Toppoly TDO24M series LCD panel, say y here to
+ If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
include the support for it.
config LCD_VGG2432A4
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 8427669..d17f668 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -17,6 +17,8 @@
#include <linux/fb.h>
#include <linux/lcd.h>
+#include <video/tdo24m.h>
+
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
#define TDO24M_SPI_BUFF_SIZE (4)
@@ -31,6 +33,9 @@ struct tdo24m {
struct spi_transfer xfer;
uint8_t *buf;
+ int (*adj_mode)(struct tdo24m *lcd, int mode);
+ int color_invert;
+
int power;
int mode;
};
@@ -66,7 +71,7 @@ static uint32_t lcd_panel_off[] = {
CMD_NULL,
};
-static uint32_t lcd_vga_pass_through[] = {
+static uint32_t lcd_vga_pass_through_tdo24m[] = {
CMD1(0xB0, 0x16),
CMD1(0xBC, 0x80),
CMD1(0xE1, 0x00),
@@ -75,7 +80,7 @@ static uint32_t lcd_vga_pass_through[] = {
CMD_NULL,
};
-static uint32_t lcd_qvga_pass_through[] = {
+static uint32_t lcd_qvga_pass_through_tdo24m[] = {
CMD1(0xB0, 0x16),
CMD1(0xBC, 0x81),
CMD1(0xE1, 0x00),
@@ -84,7 +89,7 @@ static uint32_t lcd_qvga_pass_through[] = {
CMD_NULL,
};
-static uint32_t lcd_vga_transfer[] = {
+static uint32_t lcd_vga_transfer_tdo24m[] = {
CMD1(0xcf, 0x02), /* Blanking period control (1) */
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
CMD1(0xd1, 0x01), /* CKV timing control on/off */
@@ -110,6 +115,35 @@ static uint32_t lcd_qvga_transfer[] = {
CMD_NULL,
};
+static uint32_t lcd_vga_pass_through_tdo35s[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x80),
+ CMD1(0xE1, 0x00),
+ CMD1(0x3B, 0x00),
+ CMD_NULL,
+};
+
+static uint32_t lcd_qvga_pass_through_tdo35s[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x81),
+ CMD1(0xE1, 0x00),
+ CMD1(0x3B, 0x22),
+ CMD_NULL,
+};
+
+static uint32_t lcd_vga_transfer_tdo35s[] = {
+ CMD1(0xcf, 0x02), /* Blanking period control (1) */
+ CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd1, 0x01), /* CKV timing control on/off */
+ CMD2(0xd2, 0x00, 0x1e), /* CKV 1,2 timing control */
+ CMD2(0xd3, 0x14, 0x28), /* OEV timing control */
+ CMD2(0xd4, 0x28, 0x64), /* ASW timing control (1) */
+ CMD1(0xd5, 0x28), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+ CMD_NULL,
+};
+
static uint32_t lcd_panel_config[] = {
CMD2(0xb8, 0xff, 0xf9), /* Output control */
CMD0(0x11), /* sleep out */
@@ -148,6 +182,8 @@ static int tdo24m_writes(struct tdo24m *lcd, uint32_t *array)
int nparams, err = 0;
for (; *p != CMD_NULL; p++) {
+ if (!lcd->color_invert && *p == CMD0(0x21))
+ continue;
nparams = (*p >> 30) & 0x3;
@@ -184,12 +220,33 @@ static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
{
switch (mode) {
case MODE_VGA:
- tdo24m_writes(lcd, lcd_vga_pass_through);
+ tdo24m_writes(lcd, lcd_vga_pass_through_tdo24m);
tdo24m_writes(lcd, lcd_panel_config);
- tdo24m_writes(lcd, lcd_vga_transfer);
+ tdo24m_writes(lcd, lcd_vga_transfer_tdo24m);
break;
case MODE_QVGA:
- tdo24m_writes(lcd, lcd_qvga_pass_through);
+ tdo24m_writes(lcd, lcd_qvga_pass_through_tdo24m);
+ tdo24m_writes(lcd, lcd_panel_config);
+ tdo24m_writes(lcd, lcd_qvga_transfer);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ lcd->mode = mode;
+ return 0;
+}
+
+static int tdo35s_adj_mode(struct tdo24m *lcd, int mode)
+{
+ switch (mode) {
+ case MODE_VGA:
+ tdo24m_writes(lcd, lcd_vga_pass_through_tdo35s);
+ tdo24m_writes(lcd, lcd_panel_config);
+ tdo24m_writes(lcd, lcd_vga_transfer_tdo35s);
+ break;
+ case MODE_QVGA:
+ tdo24m_writes(lcd, lcd_qvga_pass_through_tdo35s);
tdo24m_writes(lcd, lcd_panel_config);
tdo24m_writes(lcd, lcd_qvga_transfer);
break;
@@ -213,7 +270,7 @@ static int tdo24m_power_on(struct tdo24m *lcd)
if (err)
goto out;
- err = tdo24m_adj_mode(lcd, lcd->mode);
+ err = lcd->adj_mode(lcd, lcd->mode);
out:
return err;
}
@@ -262,7 +319,7 @@ static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
if (lcd->mode == mode)
return 0;
- return tdo24m_adj_mode(lcd, mode);
+ return lcd->adj_mode(lcd, mode);
}
static struct lcd_ops tdo24m_ops = {
@@ -276,8 +333,13 @@ static int __devinit tdo24m_probe(struct spi_device *spi)
struct tdo24m *lcd;
struct spi_message *m;
struct spi_transfer *x;
+ struct tdo24m_platform_data *pdata;
int err;
+ pdata = spi->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
spi->bits_per_word = 8;
spi->mode = SPI_MODE_3;
err = spi_setup(spi);
@@ -306,6 +368,20 @@ static int __devinit tdo24m_probe(struct spi_device *spi)
x->tx_buf = &lcd->buf[0];
spi_message_add_tail(x, m);
+ switch (pdata->model) {
+ case TDO24M:
+ lcd->color_invert = 1;
+ lcd->adj_mode = tdo24m_adj_mode;
+ break;
+ case TDO35S:
+ lcd->adj_mode = tdo35s_adj_mode;
+ lcd->color_invert = 0;
+ break;
+ default:
+ dev_err(&spi->dev, "Unsupported model");
+ goto out_free;
+ }
+
lcd->lcd_dev = lcd_device_register("tdo24m", &spi->dev,
lcd, &tdo24m_ops);
if (IS_ERR(lcd->lcd_dev)) {
diff --git a/include/video/tdo24m.h b/include/video/tdo24m.h
new file mode 100644
index 0000000..7572d4e
--- /dev/null
+++ b/include/video/tdo24m.h
@@ -0,0 +1,13 @@
+#ifndef __TDO24M_H__
+#define __TDO24M_H__
+
+enum tdo24m_model {
+ TDO24M,
+ TDO35S,
+};
+
+struct tdo24m_platform_data {
+ enum tdo24m_model model;
+};
+
+#endif /* __TDO24M_H__ */
--
Sincerely yours,
Mike.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next reply other threads:[~2008-11-27 11:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-27 11:23 Mike Rapoport [this message]
2008-11-28 1:13 ` [PATCH 1/2] lcd: add support for Toppoly TDO35S series to tdo24m driver Eric Miao
2008-11-30 7:32 ` Mike Rapoport
2008-11-30 7:40 ` Eric Miao
2008-12-03 8:56 ` [Linux-fbdev-devel] " Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=492E8349.40309@compulab.co.il \
--to=mike@compulab.co.il \
--cc=eric.miao@marvell.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).