* [RFC 2/3 v3]update web addresses in stagging
[not found] ` <1285373337-10945-1-git-send-email-justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2010-09-25 0:08 ` Justin P. Mattock
2010-09-25 0:34 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Justin P. Mattock @ 2010-09-25 0:08 UTC (permalink / raw)
To: trivial-DgEjT+Ai2ygdnm+yROfE0A
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
linux-ide-u79uwXL29TY76Z2rM5mHXA, Justin P. Mattock
The below patch, is a simple fix to a broken web address not using a period in it's
name. I'll leave this up to you guys if you want to use it...
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
---
.../comedi/drivers/addi-data/APCI1710_82x54.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_82x54.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_Chrono.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Dig_io.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Dig_io.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_INCCPT.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_INCCPT.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_Inp_cpt.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Inp_cpt.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_Pwm.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Pwm.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_Ssi.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Ssi.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_Tor.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Tor.h | 2 +-
.../comedi/drivers/addi-data/APCI1710_Ttl.c | 2 +-
.../comedi/drivers/addi-data/APCI1710_Ttl.h | 2 +-
.../comedi/drivers/addi-data/addi_amcc_S5920.c | 2 +-
.../comedi/drivers/addi-data/addi_amcc_S5920.h | 2 +-
.../comedi/drivers/addi-data/addi_amcc_s5933.h | 2 +-
.../staging/comedi/drivers/addi-data/addi_common.c | 2 +-
.../staging/comedi/drivers/addi-data/addi_common.h | 2 +-
.../staging/comedi/drivers/addi-data/addi_eeprom.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_APCI1710.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_APCI1710.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci035.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci035.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1032.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1032.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1500.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1500.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1516.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1516.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1564.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci1564.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci16xx.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2016.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2016.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2032.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2032.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2200.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2200.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3120.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3120.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3200.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3200.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3501.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3501.h | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3xxx.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci3xxx.h | 2 +-
50 files changed, 50 insertions(+), 50 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
index 60213d2..b59f2d4 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
index 9698ae1..81346db 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
index fbc26a0..644bda4 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
index a6898e4..07108f9 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
index af1b9cd..cc3973d 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
index 0e498e9..14b13ea 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
index 7b48110..358298b 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
index 204d798..3f9cfa2 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
index 61a21cc..31fbb0b 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
index 148ce6f..8883e66 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
index bf1b4c3..d8ad0b9 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
index 6360de5..0c890a9 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
index eb7f101..ef4d887 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
index 344df94..7361d50 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
index 03a93cb..537d475 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
index de6f772..9e177f4 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
index c4f1134..adcab82 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
index 97c10aa..90e71e1 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h
index 622a4ac..9afdb13 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
index 8ed19bc..35a3ea1 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 5ed4b94..93d7c05 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h
index 1a28169..13621d4 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index e0213a9..0aa11a0 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
index d7d768e..b748efc 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
index 22b3e56..89c99eb 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
index 1369e22..74012e0 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
index 68db9c1..3c700c7 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
index faea003..6e06d9d 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
index e29a72a..7114acb 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
index b3b9218..b5d7d98 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
index 0579033..647f9eb 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
index 7948c41..70edc38 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
index 21c09ed..4472829 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 4299ff5..806f76d 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
index 0780c44..c91594d 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
index 8bc88ad..8ebb254 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
index 89783b1eb..7090c24 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
index 639944c..c42612a 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
index d7d2223..73802ab 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
index c971d14..ab145e7 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
index e01889c..ced101f 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
index 63e5f1f..83f42af 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 851f71b..a813fdb 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
index fedfc9c..b3c8197 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
@@ -9,7 +9,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index 560c848..5fd0303 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
index f3e7ebf..812a9c4 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
index 4ed441a..517e9ab 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
index 743523e..63df635 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
index 2e20bc7..d3c5963 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
@@ -8,7 +8,7 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
- http://www.addi-data-com
+ http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h
index 788d7c1..cce9e12 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h
@@ -6,7 +6,7 @@
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
- * http://www.addi-data-com
+ * http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
--
1.7.2.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RFC 2/3 v3]update web addresses in stagging
2010-09-25 0:08 ` [RFC 2/3 v3]update web addresses in stagging Justin P. Mattock
@ 2010-09-25 0:34 ` Greg KH
2010-09-25 0:51 ` Justin P. Mattock
0 siblings, 1 reply; 7+ messages in thread
From: Greg KH @ 2010-09-25 0:34 UTC (permalink / raw)
To: Justin P. Mattock
Cc: trivial, linux-kernel, linux-wireless, linux-usb, linux-scsi,
linux-fbdev, alsa-devel, dri-devel, linux-ide
On Fri, Sep 24, 2010 at 05:08:56PM -0700, Justin P. Mattock wrote:
> The below patch, is a simple fix to a broken web address not using a period in it's
> name. I'll leave this up to you guys if you want to use it...
>
> Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
I'll queue it up, thanks.
Oh, it's "staging", not "stagging" as you have up there in the Subject:
:)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC 2/3 v3]update web addresses in stagging
2010-09-25 0:34 ` Greg KH
@ 2010-09-25 0:51 ` Justin P. Mattock
[not found] ` <4C9D47AC.6000002-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
0 siblings, 1 reply; 7+ messages in thread
From: Justin P. Mattock @ 2010-09-25 0:51 UTC (permalink / raw)
To: Greg KH
Cc: trivial, linux-kernel, linux-wireless, linux-usb, linux-scsi,
linux-fbdev, alsa-devel, dri-devel, linux-ide
On 09/24/2010 05:34 PM, Greg KH wrote:
> On Fri, Sep 24, 2010 at 05:08:56PM -0700, Justin P. Mattock wrote:
>> The below patch, is a simple fix to a broken web address not using a period in it's
>> name. I'll leave this up to you guys if you want to use it...
>>
>> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>
> I'll queue it up, thanks.
>
> Oh, it's "staging", not "stagging" as you have up there in the Subject:
> :)
>
> thanks,
>
> greg k-h
>
shoot... and I actually changed it from staging to stagging thinking
that was correct..(duh)..
Anyways alright.. I'll exclude this one if the other sets get finalized.
Justin P. Mattock
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC 2/3 v3]update web addresses in stagging
[not found] ` <4C9D47AC.6000002-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2010-09-25 20:47 ` Matthew Dharm
2010-09-25 21:30 ` Justin P. Mattock
0 siblings, 1 reply; 7+ messages in thread
From: Matthew Dharm @ 2010-09-25 20:47 UTC (permalink / raw)
To: Justin P. Mattock
Cc: Greg KH, trivial-DgEjT+Ai2ygdnm+yROfE0A,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
linux-ide-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 1232 bytes --]
On Fri, Sep 24, 2010 at 05:51:56PM -0700, Justin P. Mattock wrote:
> On 09/24/2010 05:34 PM, Greg KH wrote:
> >On Fri, Sep 24, 2010 at 05:08:56PM -0700, Justin P. Mattock wrote:
> >>The below patch, is a simple fix to a broken web address not using a
> >>period in it's
> >>name. I'll leave this up to you guys if you want to use it...
> >>
> >> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
> >
> >I'll queue it up, thanks.
> >
> >Oh, it's "staging", not "stagging" as you have up there in the Subject:
> >:)
> >
> >thanks,
> >
> >greg k-h
> >
>
> shoot... and I actually changed it from staging to stagging thinking
> that was correct..(duh)..
>
> Anyways alright.. I'll exclude this one if the other sets get finalized.
One random suggestion: Perhaps you should include a date here? i.e. "URL
blah blah blah (as of Sept 2010)"
That way, people have some idea how much they can trust that URL without
having to dig into the kernel history to see when it was last changed.
Matt
--
Matthew Dharm Home: mdharm-usb@one-eyed-alien.net
Maintainer, Linux USB Mass Storage Driver
It was a new hope.
-- Dust Puppy
User Friendly, 12/25/1998
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC 2/3 v3]update web addresses in stagging
2010-09-25 20:47 ` Matthew Dharm
@ 2010-09-25 21:30 ` Justin P. Mattock
0 siblings, 0 replies; 7+ messages in thread
From: Justin P. Mattock @ 2010-09-25 21:30 UTC (permalink / raw)
To: Greg KH, trivial, linux-kernel, linux-wireless, linux-usb,
linux-scsi, linux-fbdev
On 09/25/2010 01:47 PM, Matthew Dharm wrote:
> On Fri, Sep 24, 2010 at 05:51:56PM -0700, Justin P. Mattock wrote:
>> On 09/24/2010 05:34 PM, Greg KH wrote:
>>> On Fri, Sep 24, 2010 at 05:08:56PM -0700, Justin P. Mattock wrote:
>>>> The below patch, is a simple fix to a broken web address not using a
>>>> period in it's
>>>> name. I'll leave this up to you guys if you want to use it...
>>>>
>>>> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>>>
>>> I'll queue it up, thanks.
>>>
>>> Oh, it's "staging", not "stagging" as you have up there in the Subject:
>>> :)
>>>
>>> thanks,
>>>
>>> greg k-h
>>>
>>
>> shoot... and I actually changed it from staging to stagging thinking
>> that was correct..(duh)..
>>
>> Anyways alright.. I'll exclude this one if the other sets get finalized.
>
> One random suggestion: Perhaps you should include a date here? i.e. "URL
> blah blah blah (as of Sept 2010)"
>
> That way, people have some idea how much they can trust that URL without
> having to dig into the kernel history to see when it was last changed.
>
> Matt
>
well.. as it stand right now doing grep -Re "http" in all the
directories(minus COPYING/MAINTAINERS) gave me a little over 2000
addresses to check(not so bad, only a few days worth of checking(finding
the broken address is time consuming)).. so I could go back and do this
for all of them except the webarchive addresses that are broken(maybe
put a tag on them saying use_webarchive or something).
then there is the question of how much more bloated will the kernel get
with such a thing(I'm guessing not much, but then again you never know).
Justin P. Mattock
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC 1/3 v3]update web addresses in the kernel
[not found] <1285373337-10945-1-git-send-email-justinmattock@gmail.com>
[not found] ` <1285373337-10945-1-git-send-email-justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2010-09-26 9:43 ` Finn Thain
2010-09-26 13:42 ` Justin P. Mattock
1 sibling, 1 reply; 7+ messages in thread
From: Finn Thain @ 2010-09-26 9:43 UTC (permalink / raw)
To: Justin P. Mattock
Cc: trivial, linux-kernel, linux-wireless, linux-usb, linux-scsi,
linux-fbdev, alsa-devel, dri-devel, linux-ide, Maciej W. Rozycki,
Geert Uytterhoeven, Randy Dunlap, Matt Turner, Dimitry Torokhov,
Mike Frysinger
Hi Justin,
Some comments on your latest patch follow.
On Fri, 24 Sep 2010, Justin P. Mattock wrote:
> --- a/drivers/ata/pata_it821x.c
> +++ b/drivers/ata/pata_it821x.c
> @@ -16,7 +16,7 @@
> * Based in part on the ITE vendor provided SCSI driver.
> *
> * Documentation available from
> - * http://www.ite.com.tw/pc/IT8212F_V04.pdf
> + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
The existence of the pdf could be useful information when one needs to
locate a copy. I think the filename needs to be retained.
> * Some other documents are NDA.
> *
> * The ITE8212 isn't exactly a standard IDE controller. It has two
> diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
> index a2fa1fe..adb6574 100644
> --- a/drivers/edac/i82443bxgx_edac.c
> +++ b/drivers/edac/i82443bxgx_edac.c
> @@ -12,7 +12,7 @@
> * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
> *
> * Written with reference to 82443BX Host Bridge Datasheet:
> - * http://www.intel.com/design/chipsets/440/documentation.htm
> + * http://ark.intel.com/Product.aspx?id'151
That's the wrong document. It refers to processor number 440 not the *440
chipsets.
Google offers this link:
http://download.intel.com/design/chipsets/datashts/29063301.pdf
> * references to this document given in [].
> *
> * This module doesn't support the 440LX, but it may be possible to
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 280c9b5..aec5691 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -74,7 +74,8 @@ config EFI_PCDP
>
> You must also enable the appropriate drivers (serial, VGA, etc.)
>
> - See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
> + See DIG64_HCDPv20_042804.pdf available from
> + <http://www.dig64.org/specifications/>
Can you do the same for IT8212F_V04.pdf above?
>
> config DELL_RBU
> tristate "BIOS update support for DELL systems via sysfs"
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 949326d..f3e9d45 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
> * according to the hdisplay, vdisplay, vrefresh.
> * It is based from the VESA(TM) Coordinated Video Timing Generator by
> * Graham Loveridge April 9, 2003 available at
> - * http://www.vesa.org/public/CVT/CVTd6r1.xls
> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> *
> * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
> * What I have done is to translate it by using integer calculation.
> /*
> * Keymap for ATCom AU-100
> - * http://www.atcom.cn/En_products_AU100.html
> + * http://www.atcom.cn/products.html
> * http://www.packetizer.com/products/au100/
> * http://www.voip-info.org/wiki/view/AU-100
> *
> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> index c714ca2..5e98430 100644
> --- a/drivers/input/mouse/Kconfig
> +++ b/drivers/input/mouse/Kconfig
> @@ -27,10 +27,7 @@ config MOUSE_PS2
>
> Synaptics, ALPS or Elantech TouchPad users might be interested
> in a specialized Xorg/XFree86 driver at:
> - <http://w1.894.telia.com/~u89404340/touchpad/index.html>
> - and a new version of GPM at:
> - <http://www.geocities.com/dt_or/gpm/gpm.html>
This one is in the web archive so it might be a good idea to keep the URL?
> - to take advantage of the advanced features of the touchpad.
> + <http://xorg.freedesktop.org/archive/individual/driver/>
>
> If unsure, say Y.
>
> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
> index abd64e8..43eea3a 100644
> --- a/drivers/media/video/cx23885/cx23885-417.c
> +++ b/drivers/media/video/cx23885/cx23885-417.c
> @@ -7,7 +7,7 @@
> * (c) 2008 Steven Toth <stoth@linuxtv.org>
> * - CX23885/7/8 support
> *
> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/),
How about,
+ * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
> index e46e1ce..821766e 100644
> --- a/drivers/media/video/cx88/cx88-blackbird.c
> +++ b/drivers/media/video/cx88/cx88-blackbird.c
> @@ -9,7 +9,7 @@
> * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
> * - video_ioctl2 conversion
> *
> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/),
Same here.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
> index 4d6a64c..8e201b8 100644
> --- a/drivers/mtd/ftl.c
> +++ b/drivers/mtd/ftl.c
> @@ -51,7 +51,7 @@
>
> Use of the FTL format for non-PCMCIA applications may be an
> infringement of these patents. For additional information,
> - contact M-Systems (http://www.m-sys.com) directly.
> + contact M-Systems directly. [M-Systems since acquired by Sandisk.].
An entire sentence within parentheses is usually written like this:
+ contact M-Systems directly. [M-Systems since acquired by Sandisk.]
>
> ===================================*/
> #include <linux/mtd/blktrans.h>
> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
> index db1dfc5..48894dc 100644
> --- a/drivers/mtd/nand/cafe_nand.c
> +++ b/drivers/mtd/nand/cafe_nand.c
> @@ -2,7 +2,7 @@
> * Driver for One Laptop Per Child ?CAF?? controller, aka Marvell 88ALP01
> *
> * The data sheet for this device can be found at:
> - * http://www.marvell.com/products/pcconn/88ALP01.jsp
> + * http://www.marvell.com/products/pc_connectivity/88alp01/
No, it isn't there any longer. It is here though:
http://wiki.laptop.org/go/Datasheets
> *
> * Copyright ? 2006 Red Hat, Inc.
> * Copyright ? 2006 David Woodhouse <dwmw2@infradead.org>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 2cc81a5..99fb1f6 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -1541,7 +1541,7 @@ config FEALNX
> help
> Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
> cards. Specifications and data at
> - <http://www.myson.com.hk/mtd/datasheet/>.
> + <http://www.datasheetarchive.com/datasheet-pdf/022/DSA00384882.html>.
Links to the datasheetarchive are probably redundant. We have search
engines for that. Also, there are three devices supported by this driver
and your link is only good for one of them, so searching is likely to be
needed anyway.
The site is actually http://www.myson.com.tw/ but there's no product
information there any longer. I'd suggest this (also correcting the typo):
- Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
- cards. Specifications and data at
- <http://www.myson.com.hk/mtd/datasheet/>.
+ Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
+ cards. <http://www.myson.com.tw/>
>
> config NATSEMI
> tristate "National Semiconductor DP8381x series PCI Ethernet support"
> http://www.national.com/pf/DP/DP83840A.html
>
> index c683f77..230158b 100644
> --- a/drivers/net/pcmcia/3c574_cs.c
> +++ b/drivers/net/pcmcia/3c574_cs.c
> @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
> V. References
>
> http://www.scyld.com/expert/NWay.html
> -http://www.national.com/pf/DP/DP83840.html
> +http://www.national.com/opf/DP/DP83840A.html#Overview
No need for the "#Overview" anchor.
>
> Thanks to Terry Murphy of 3Com for providing development information for
> earlier 3Com products.
> diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h
> index 150511a..45f5323 100644
> --- a/drivers/net/sis900.h
> +++ b/drivers/net/sis900.h
> @@ -7,7 +7,7 @@
> * preliminary Rev. 1.0 Nov. 10, 1998
> * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
> * preliminary Rev. 1.0 Jan. 18, 1998
> - * http://www.sis.com.tw/support/databook.htm
> + * http://www.sis.com/elibrary/elibrary_index00.htm
The old URL is in the web archive, complete with the relevant datasheets.
But if I follow your URL, I get nothing useful.
> */
>
> /*
> index b0342a5..024fccc 100644
> --- a/drivers/net/wireless/p54/Kconfig
> +++ b/drivers/net/wireless/p54/Kconfig
> @@ -8,7 +8,7 @@ config P54_COMMON
> also need to be enabled in order to support any devices.
>
> These devices require softmac firmware which can be found at
> - http://prism54.org/
> + http://wireless.kernel.org/en/users/Drivers/p54
The convention seems to be angle brackets around URLS in Kconfig.
>
> If you choose to build a module, it'll be called p54common.
>
> @@ -20,7 +20,7 @@ config P54_USB
> This driver is for USB isl38xx based wireless cards.
>
> These devices require softmac firmware which can be found at
> - http://prism54.org/
> + http://wireless.kernel.org/en/users/Drivers/p54
Same.
>
> If you choose to build a module, it'll be called p54usb.
>
> @@ -34,7 +34,7 @@ config P54_PCI
> supported by the fullmac driver/firmware.
>
> This driver requires softmac firmware which can be found at
> - http://prism54.org/
> + http://wireless.kernel.org/en/users/Drivers/p54
>
> If you choose to build a module, it'll be called p54pci.
>
Same.
> @@ -205,7 +205,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir
> /*
> * VIA Apollo KT133 needs PCI latency patch
> * Made according to a windows driver based patch by George E. Breese
> - * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
> + * see PCI Latency Adjust on http://www.georgebreese.com/net/software/#PCI
The old link is in the web archive, but yours is also useful.
Can't we have both?
> * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
> * the info on which Mr Breese based his work.
> *
> --- a/drivers/scsi/Kconfig
> +++ b/drivers/scsi/Kconfig
> @@ -949,7 +949,7 @@ config SCSI_IPS
> depends on PCI && SCSI
> ---help---
> This is support for the IBM ServeRAID hardware RAID controllers.
> - See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
> + See <http://www-947.ibm.com/support/entry/portal/docdisplay?brandP00008&lndocid=SERV-RAID>
The old URL is in the web archive, complete with downloads. Please keep
it around as there may be no other way to find that material.
> for more information. If this driver does not work correctly
> without modification please contact the author by email at
> <ipslinux@adaptec.com>.
> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
> index b02bdc6..705f541 100644
> --- a/drivers/scsi/scsi_debug.c
> +++ b/drivers/scsi/scsi_debug.c
> @@ -555,8 +555,8 @@ static int inquiry_evpd_84(unsigned char * arr)
> static int inquiry_evpd_85(unsigned char * arr)
> {
> int num = 0;
> - const char * na1 = "https://www.kernel.org/config";
> - const char * na2 = "http://www.kernel.org/log";
> + const char * na1 = "https://www.kernel.org";
> + const char * na2 = "http://www.kernel.org";
Why? These are deliberately fake, and deliberately different.
BTW, a URL like http://www.kernel.org/ is supposed to have the slash at
the end.
> int plen, olen;
>
> arr[num++] = 0x1; /* lu, storage config */
> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
> index 24110f6..41a3ed8 100644
> --- a/drivers/serial/8250.c
> +++ b/drivers/serial/8250.c
> @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
> /*
> * Exar ST16C2550 "A2" devices incorrectly detect as
> * having an EFR, and report an ID of 0x0201. See
> - * http://www.exar.com/info.php?pdfÚn180_oct2004.pdf
> + * http://linux.derkeiler.com/pdf/Mailing-Lists/Kernel/2004-11/4812.pdf
This link is better since it has the entire thread:
http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
> */
> if (autoconfig_read_divisor_id(up) = 0x0201 && size_fifo(up) = 16)
> return 1;
> diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
> index 96b9717..b6f77c5 100644
> --- a/drivers/staging/asus_oled/README
> +++ b/drivers/staging/asus_oled/README
> @@ -2,7 +2,7 @@
> Driver for Asus OLED display present in some Asus laptops.
>
> The code of this driver is based on 'asusoled' program taken from
> - https://launchpad.net/asusoled/. I just wanted to have a simple
> + http://lapsus.berlios.de/asus_oled.html. I just wanted to have a simple
The trailing "." isn't helping. Put it inside angle brackets.
> kernel driver for controlling this device, but I didn't know how
> to do that. Now I know ;) Also, that program can not be used
> with usbhid loaded, which means no USB mouse/keyboard while
> diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
> index 5b279fb..1cb2116 100644
> --- a/drivers/staging/asus_oled/asus_oled.c
> +++ b/drivers/staging/asus_oled/asus_oled.c
> @@ -24,7 +24,7 @@
> *
> *
> * Asus OLED support is based on asusoled program taken from
> - * https://launchpad.net/asusoled/.
> + * http://lapsus.berlios.de/asus_oled.html.
Same here.
> *
> *
> */
> diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
> index ced346a..e4cf861 100644
> --- a/drivers/staging/comedi/drivers/cb_pcimdas.c
> +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
> @@ -37,7 +37,7 @@ Configuration Options:
> Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
> Only supports DIO, AO and simple AI in it's present form.
> No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
> -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
> +See http://www.mccdaq.com/specs.aspx for more details.
This loses information. Your patch removes the filename. For example,
Googling that filename gives this:
http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf
> */
>
> #include "../comedidev.h"
> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
> index 6af6c83..ba5a980 100644
> --- a/drivers/staging/comedi/drivers/daqboard2000.c
> +++ b/drivers/staging/comedi/drivers/daqboard2000.c
> @@ -51,7 +51,7 @@ Configuration options:
> for the card, and here are the findings so far.
>
> 1. A good document that describes the PCI interface chip is found at:
> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
> + http://www.plxtech.com/products/io/pci9080
Again, googling "9080db-106.pdf" locates the pdf, but it isn't available
without registration using the link you provided. I suggest that you at
least keep the filename (see above).
>
> 2. The initialization done so far is:
> a. program the FPGA (windows code sans a lot of error messages)
> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
> index bd16f91..a2691db 100644
> --- a/drivers/staging/comedi/drivers/ni_mio_common.c
> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
> @@ -34,7 +34,7 @@
> 340747b.pdf AT-MIO E series Register Level Programmer Manual
> 341079b.pdf PCI E Series RLPM
> 340934b.pdf DAQ-STC reference manual
> - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
> + 67xx and 611x registers (from http://www.ni.com/pdf/manuals/340934b.pdf)
> release_ni611x.pdf
> release_ni67xx.pdf
This is wrong. The URL you provided doesn't offer release_ni611x.pdf or
release_ni67xx.pdf. Those two documents are here:
ftp://ftp.ni.com/support/daq/mhddk/documentation/
> Other possibly relevant info:
> diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
> index 485d63f..6c14b6b 100644
> --- a/drivers/staging/comedi/drivers/plx9080.h
> +++ b/drivers/staging/comedi/drivers/plx9080.h
> @@ -13,7 +13,7 @@
> *
> ********************************************************************
> *
> - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
> + * Copyright (C) 1999 RG Studio s.c.,
You could lose the trailing comma.
> * Written by Krzysztof Halasa <khc@rgstudio.com.pl>
> *
> * Portions (C) SBE Inc., used by permission.
> diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
> index 6612247..31b0a13 100644
> --- a/drivers/staging/quickstart/quickstart.c
> +++ b/drivers/staging/quickstart/quickstart.c
> @@ -5,8 +5,7 @@
> * Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com>
> *
> * Information gathered from disassebled dsdt and from here:
> - * "http://download.microsoft.com/download/9/c/5/
> - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
> + * "http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx"
Angle brackets would be better than quote marks.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig
> index b5f78b6..fda68f7 100644
> --- a/drivers/telephony/Kconfig
> +++ b/drivers/telephony/Kconfig
> @@ -31,7 +31,7 @@ config PHONE_IXJ
> isapnp support. Please read <file:Documentation/telephony/ixj.txt>.
>
> For more information on these cards, see Quicknet's web site at:
> - <http://www.quicknet.net/>.
> + <http://www.qn.net/>.
No, Quicknet Technologies (www.quicknet.net in the web archive) is not the
same as Quicknet, Inc. The URL is in the web archive.
>
> If you do not have any Quicknet telephony cards, you can safely
> say N here.
> diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
> index b53deee..872ee40 100644
> --- a/drivers/telephony/ixj.c
> +++ b/drivers/telephony/ixj.c
> @@ -26,7 +26,7 @@
> * Daniele Bellucci, <bellucda@tiscali.it>
> *
> * More information about the hardware related to this driver can be found
> - * at our website: http://www.quicknet.net
> + * at our website: http://www.qn.net/
Same.
> *
> * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
> * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
> diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h
> index 4c32a43..c012193 100644
> --- a/drivers/telephony/ixj.h
> +++ b/drivers/telephony/ixj.h
> @@ -22,7 +22,7 @@
> * Mike Preston, <mpreston@quicknet.net>
> *
> * More information about the hardware related to this driver can be found
> - * at our website: http://www.quicknet.net
> + * at our website: http://www.qn.net/
Same.
> *
> * Fixes:
> *
> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> index 1da73ec..8d3ba1d 100644
> --- a/drivers/uio/Kconfig
> +++ b/drivers/uio/Kconfig
> @@ -19,7 +19,7 @@ config UIO_CIF
> Driver for Hilscher CIF DeviceNet and Profibus cards. This
> driver requires a userspace component that handles all of the
> heavy lifting and can be found at:
> - http://www.osadl.org/projects/downloads/UIO/user/cif-*
> + http://www.osadl.org/projects/downloads/UIO/user/
The old link is correct. But it can be improved. For example --
- driver requires a userspace component that handles all of the
- heavy lifting and can be found at:
- http://www.osadl.org/projects/downloads/UIO/user/cif-*
+ driver requires a userspace component called cif that handles
+ all of the heavy lifting and can be found at:
+ http://www.osadl.org/projects/downloads/UIO/user/
>
> To compile this driver as a module, choose M here: the module
> will be called uio_cif.
> diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
> index 916b2b6..fc20f80 100644
> --- a/drivers/usb/serial/Kconfig
> +++ b/drivers/usb/serial/Kconfig
> @@ -264,7 +264,7 @@ config USB_SERIAL_IUU
> help
> Say Y here if you want to use a IUU in phoenix mode and get
> an extra ttyUSBx device. More information available on
> - http://eczema.ecze.com/iuu_phoenix.html
> + http://www.opensc-project.org/openct/wiki/wbeiuu
The old URL is in the web archive. You don't have to use this IUU driver
with OpenSC...
>
> To compile this driver as a module, choose M here: the
> module will be called iuu_phoenix.o
> @@ -289,7 +289,8 @@ config USB_SERIAL_KEYSPAN
> and was developed with their support. You must also include
> firmware to support your particular device(s).
>
> - See <http://misc.nu/hugh/keyspan.html> for more information.
> + See <http://www.carnationsoftware.com/carnation/Keyspan.html>
I dunno what Carnation Software has to do with it. Hugh's page moved
here:
http://blemings.org/hugh/keyspan.html
> + for more information.
>
> To compile this driver as a module, choose M here: the
> module will be called keyspan.
> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
> index 15a4583..2438ae0 100644
> --- a/drivers/usb/serial/ftdi_sio_ids.h
> +++ b/drivers/usb/serial/ftdi_sio_ids.h
> @@ -335,7 +335,7 @@
> #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
>
> /* ACT Solutions HomePro ZWave interface
> - (http://www.act-solutions.com/HomePro.htm) */
> + (http://www.act-solutions.com/index.php) */
A better link is,
http://www.act-solutions.com/HomePro-Product-Matrix.html
> #define FTDI_ACTZWAVE_PID 0xF2D0
>
> /*
> @@ -434,7 +434,7 @@
>
> /*
> * PCDJ use ftdi based dj-controllers. The following PID is
> - * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
> + * for their DAC-2 device http://pcdj.com/index.php/support/dex_dac_2/
That's not the same page. The old one is in the web archive, so no patch
needed.
> * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
> */
> #define FTDI_PCDJ_DAC2_PID 0xFA88
> @@ -723,7 +723,7 @@
>
> /*
> * Bayer Ascensia Contour blood glucose meter USB-converter cable.
> - * http://winglucofacts.com/cables/
> + * http://www.simplewins.com/Default.aspx
The old link is valid. Your URL has this:
http://www.simplewins.com/site/Adults/Monitor/Pages/Bayer-Products/Contour-USB
but who's to say whether it has the same PID/VID? I don't know...
> */
> #define BAYER_VID 0x1A79
> #define BAYER_CONTOUR_CABLE_PID 0x6001
> diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
> index 297163c..9240914 100644
> --- a/drivers/usb/serial/keyspan.c
> +++ b/drivers/usb/serial/keyspan.c
> @@ -9,7 +9,7 @@
> the Free Software Foundation; either version 2 of the License, or
> (at your option) any later version.
>
> - See http://misc.nu/hugh/keyspan.html for more information.
> + See http://www.carnationsoftware.com/carnation/Keyspan.html for more information.
As above,
http://blemings.org/hugh/keyspan.html
>
> Code in this driver inspired by and in a number of places taken
> from Brian Warner's original Keyspan-PDA driver.
> diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
> index bf3297d..f8b6a41 100644
> --- a/drivers/usb/serial/keyspan.h
> +++ b/drivers/usb/serial/keyspan.h
> @@ -9,7 +9,7 @@
> the Free Software Foundation; either version 2 of the License, or
> (at your option) any later version.
>
> - See http://misc.nu/hugh/keyspan.html for more information.
> + See http://www.carnationsoftware.com/carnation/Keyspan.html for more information.
http://blemings.org/hugh/keyspan.html
>
> Code in this driver inspired by and in a number of places taken
> from Brian Warner's original Keyspan-PDA driver.
> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
> index 3a3f5e6..6f773c4 100644
> --- a/drivers/usb/serial/mct_u232.h
> +++ b/drivers/usb/serial/mct_u232.h
> @@ -10,10 +10,10 @@
> *
> * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
> * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
> - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
> - * information. The properties of this device are listed at the end of this
> - * file. This device is available from various distributors. I know Hana,
> - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
> + * for further information. The properties of this device are listed at the end
> + * of this file. This device is available from various distributors.
> + * D-Link, http://www.dlink.com/products/usb/dsbs25.
The trailing "." should go. How about this --
+ * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
+ * for further information. The properties of this device are listed at the end
+ * of this file. This device was used in the Dlink DSB-S25.
> *
> * All of the information about the device was acquired by using SniffUSB
> * on Windows98. The technical details of the reverse engineering are
> diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
> index 8a372ba..b356e15 100644
> --- a/drivers/usb/storage/Kconfig
> +++ b/drivers/usb/storage/Kconfig
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 8b31fdf..a07fc57 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -1323,7 +1323,7 @@ config FB_RADEON
> don't need to choose this to run the Radeon in plain VGA mode.
>
> There is a product page at
> - http://apps.ati.com/ATIcompare/
> + http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx
There's no hardware product information at the URL you gave. It is a
brouchure for AMD's Catalyst software. Here is the URL for the product
specs:
http://products.amd.com/en-us/GraphicCardResult.aspx
>
> config FB_RADEON_I2C
> bool "DDC/I2C for ATI Radeon support"
> @@ -1395,7 +1395,7 @@ config FB_ATY_CT
> Say Y here to support use of ATI's 64-bit Rage boards (or other
> boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
> framebuffer device. The ATI product support page for these boards
> - is at <http://support.ati.com/products/pc/mach64/>.
> + is at <http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx>.
Why? Catalyst is not related to Mach64. Here's the URL you want:
http://support.ati.com/products/pc/mach64/mach64.html
You won't find any info at amd.com but at least it works in the web
archive, which is a huge improvement.
>
> config FB_ATY_GENERIC_LCD
> bool "Mach64 generic LCD support (EXPERIMENTAL)"
> diff --git a/fs/nls/nls_euc-jp.c b/fs/nls/nls_euc-jp.c
> index 7424929..d7d5526 100644
> --- a/fs/nls/nls_euc-jp.c
> +++ b/fs/nls/nls_euc-jp.c
> @@ -3,7 +3,7 @@
> *
> * Added `OSF/JVC Recommended Code Set Conversion Specification
> * between Japanese EUC and Shift-JIS' support: <hirofumi@mail.parknet.co.jp>
> - * (http://www.opengroup.or.jp/jvc/cde/sjis-euc-e.html)
> + * (http://www.opengroup.or.jp/)
The document is in the web archive, and not at your URL, so this is
damage.
> */
>
> #include <linux/module.h>
> diff --git a/include/crypto/b128ops.h b/include/crypto/b128ops.h
> index 0b8e6bc..499741c 100644
> --- a/include/crypto/b128ops.h
> +++ b/include/crypto/b128ops.h
> @@ -4,7 +4,7 @@
> * Copyright (c) 2006, Rik Snel <rsnel@cube.dyndns.org>
> *
> * Based on Dr Brian Gladman's (GPL'd) work published at
> - * http://fp.gladman.plus.com/cryptography_technology/index.htm
> + * http://www.gladman.me.uk/
Well, it doesn't say "Based on Dr Brian Gladman's latest work". The
original is in the web archive so no patch is needed I think...
> * See the original copyright notice below.
> *
> * This program is free software; you can redistribute it and/or modify it
> diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
> index 4086b8e..7021c6c 100644
> --- a/include/crypto/gf128mul.h
> +++ b/include/crypto/gf128mul.h
> @@ -4,7 +4,7 @@
> * Copyright (c) 2006 Rik Snel <rsnel@cube.dyndns.org>
> *
> * Based on Dr Brian Gladman's (GPL'd) work published at
> - * http://fp.gladman.plus.com/cryptography_technology/index.htm
> + * http://www.gladman.me.uk/
Same here.
> * See the original copyright notice below.
> *
> * This program is free software; you can redistribute it and/or modify it
> @@ -54,8 +54,8 @@
>
> /* Comment by Rik:
> *
> - * For some background on GF(2^128) see for example: http://-
> - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
> + * For some background on GF(2^128) see for example:
> + * http://www.cryptobarn.com/papers/gcm-spec.pdf
This is the correct URL:
http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
> *
> * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
> * be mapped to computer memory in a variety of ways. Let's examine
> diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
> index 88b4589..594d871 100644
> --- a/include/linux/ixjuser.h
> +++ b/include/linux/ixjuser.h
> @@ -25,7 +25,7 @@
> * Mike Preston, <mpreston@quicknet.net>
> *
> * More information about the hardware related to this driver can be found
> - * at our website: http://www.quicknet.net
> + * at our website: http://www.qn.net/
See above.
> *
> * Fixes:
> *
> diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
> index de24af7..60d73a6 100644
> --- a/include/linux/n_r3964.h
> +++ b/include/linux/n_r3964.h
> @@ -4,7 +4,7 @@
> * Copyright by
> * Philips Automation Projects
> * Kassel (Germany)
> - * http://www.pap-philips.de
> + * http://www.pronto.philips.com/index.cfm?id\x1292
This URL you have provided is certainly pap but otherwise it doesn't
relate. The URL you removed looks like advertising for a division that
doesn't exist any longer, apparently spun off as KH-Automaton Projects
GmbH. I'd remove it too.
> * -----------------------------------------------------------
> * This software may be used and distributed according to the terms of
> * the GNU General Public License, incorporated herein by reference.
> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
> index 571f895..a90050d 100644
> --- a/net/ipv4/Kconfig
> +++ b/net/ipv4/Kconfig
> @@ -84,7 +84,7 @@ config IP_FIB_TRIE
>
> An experimental study of compression methods for dynamic tries
> Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
> - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
> + http://www.csc.kth.se/~snilsson/software/dyntrie2/
>
> endchoice
>
> @@ -555,7 +555,7 @@ config TCP_CONG_VENO
> distinguishing to circumvent the difficult judgment of the packet loss
> type. TCP Veno cuts down less congestion window in response to random
> loss packets.
> - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
> + See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
You wouldn't guess from looking at either of these links, but the
citation is actually this paper:
C.P. Fu and S.C. Liew. "TCP Veno: TCP Enhancement for Transmission
Over wireless Access Networks," IEEE Journal on Selected Areas in
Communication, February 2003.
>
> config TCP_CONG_YEAH
> tristate "YeAH TCP"
> diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
> index 1833bdb..d6a784c 100644
> --- a/net/ipv4/netfilter/Kconfig
> +++ b/net/ipv4/netfilter/Kconfig
> @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
> which can only be viewed through syslog.
>
> The appropriate userspace logging daemon (ulogd) may be obtained from
> - <http://www.gnumonks.org/projects/ulogd/>
> + <http://www.gnumonks.org/projects/>
Well I tried to obtain ulogd there but I couldn't find it.
It is available here though:
http://www.netfilter.org/projects/ulogd/index.html
>
> To compile it as a module, choose M here. If unsure, say N.
>
> diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c
> index 20151d6..bbf0e99 100644
> --- a/net/ipv4/tcp_westwood.c
> +++ b/net/ipv4/tcp_westwood.c
> @@ -3,7 +3,7 @@
> *
> * Angelo Dell'Aera: author of the first version of TCP Westwood+ in Linux 2.4
> *
> - * Support at http://c3lab.poliba.it/index.php/Westwood
> + * Support at http://www.cs.ucla.edu/NRL/hpi/tcpw/
I wouldn't think that you'd get support there. It claims to be the
homepage for a BSD based implementation of TCP Westwood. In anycase,
google cached the poliba.it link on 19 Sep 2010, so I don't think this
needs to be patched. Besides, it is also in the web archive.
> * Main references in literature:
> *
> * - Mascolo S, Casetti, M. Gerla et al.
>
> The boundaries and the conditions are changed according to RFC793:
> the packet must intersect the window (i.e. segments may be
> diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
> index 456a1b4..e2c5fe9 100644
> --- a/sound/oss/ac97_codec.c
> +++ b/sound/oss/ac97_codec.c
> @@ -22,10 +22,7 @@
> **************************************************************************
> *
> * The Intel Audio Codec '97 specification is available at the Intel
"is available at:"
> - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
> - *
> - * The specification itself is currently available at:
> - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
> + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
> *
> **************************************************************************
> *
> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
> index c7fba53..deffcc8 100644
> --- a/sound/pci/ens1370.c
> +++ b/sound/pci/ens1370.c
> @@ -22,7 +22,7 @@
> /* Power-Management-Code ( CONFIG_PM )
> * for ens1371 only ( FIXME )
> * derived from cs4281.c, atiixp.c and via82xx.c
> - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
> + * using http://www.kernel.org/pub/linux/kernel/people/tiwai/docs/writing-an-alsa-driver/index.html
I think this is a better choice:
http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
> * by Kurt J. Bosch
> */
>
Thanks.
Finn
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC 1/3 v3]update web addresses in the kernel
2010-09-26 9:43 ` [RFC 1/3 v3]update web addresses in the kernel Finn Thain
@ 2010-09-26 13:42 ` Justin P. Mattock
0 siblings, 0 replies; 7+ messages in thread
From: Justin P. Mattock @ 2010-09-26 13:42 UTC (permalink / raw)
To: Finn Thain
Cc: trivial, linux-kernel, linux-wireless, linux-usb, linux-scsi,
linux-fbdev, alsa-devel, dri-devel, linux-ide, Maciej W. Rozycki,
Geert Uytterhoeven, Randy Dunlap, Matt Turner, Dimitry Torokhov,
Mike Frysinger
alright(going to top post because of how long this is). I will go and
make the changes and resend it out...
On 09/26/2010 02:43 AM, Finn Thain wrote:
>
> Hi Justin,
>
> Some comments on your latest patch follow.
>
>
> On Fri, 24 Sep 2010, Justin P. Mattock wrote:
>
>> --- a/drivers/ata/pata_it821x.c
>> +++ b/drivers/ata/pata_it821x.c
>> @@ -16,7 +16,7 @@
>> * Based in part on the ITE vendor provided SCSI driver.
>> *
>> * Documentation available from
>> - * http://www.ite.com.tw/pc/IT8212F_V04.pdf
>> + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
>
> The existence of the pdf could be useful information when one needs to
> locate a copy. I think the filename needs to be retained.
>
>
>
>> * Some other documents are NDA.
>> *
>> * The ITE8212 isn't exactly a standard IDE controller. It has two
>
>> diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
>> index a2fa1fe..adb6574 100644
>> --- a/drivers/edac/i82443bxgx_edac.c
>> +++ b/drivers/edac/i82443bxgx_edac.c
>> @@ -12,7 +12,7 @@
>> * 440GX fix by Jason Uhlenkott<juhlenko@akamai.com>.
>> *
>> * Written with reference to 82443BX Host Bridge Datasheet:
>> - * http://www.intel.com/design/chipsets/440/documentation.htm
>> + * http://ark.intel.com/Product.aspx?id'151
>
> That's the wrong document. It refers to processor number 440 not the *440
> chipsets.
>
> Google offers this link:
> http://download.intel.com/design/chipsets/datashts/29063301.pdf
>
>
>> * references to this document given in [].
>> *
>> * This module doesn't support the 440LX, but it may be possible to
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index 280c9b5..aec5691 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -74,7 +74,8 @@ config EFI_PCDP
>>
>> You must also enable the appropriate drivers (serial, VGA, etc.)
>>
>> - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
>> + See DIG64_HCDPv20_042804.pdf available from
>> + <http://www.dig64.org/specifications/>
>
> Can you do the same for IT8212F_V04.pdf above?
>
>
>>
>> config DELL_RBU
>> tristate "BIOS update support for DELL systems via sysfs"
>
>> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
>> index 949326d..f3e9d45 100644
>> --- a/drivers/gpu/drm/drm_modes.c
>> +++ b/drivers/gpu/drm/drm_modes.c
>> @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
>> * according to the hdisplay, vdisplay, vrefresh.
>> * It is based from the VESA(TM) Coordinated Video Timing Generator by
>> * Graham Loveridge April 9, 2003 available at
>> - * http://www.vesa.org/public/CVT/CVTd6r1.xls
>> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
>> *
>> * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
>> * What I have done is to translate it by using integer calculation.
>
>> /*
>> * Keymap for ATCom AU-100
>> - * http://www.atcom.cn/En_products_AU100.html
>> + * http://www.atcom.cn/products.html
>> * http://www.packetizer.com/products/au100/
>> * http://www.voip-info.org/wiki/view/AU-100
>> *
>> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
>> index c714ca2..5e98430 100644
>> --- a/drivers/input/mouse/Kconfig
>> +++ b/drivers/input/mouse/Kconfig
>> @@ -27,10 +27,7 @@ config MOUSE_PS2
>>
>> Synaptics, ALPS or Elantech TouchPad users might be interested
>> in a specialized Xorg/XFree86 driver at:
>> - <http://w1.894.telia.com/~u89404340/touchpad/index.html>
>> - and a new version of GPM at:
>> - <http://www.geocities.com/dt_or/gpm/gpm.html>
>
>
> This one is in the web archive so it might be a good idea to keep the URL?
>
>
>> - to take advantage of the advanced features of the touchpad.
>> + <http://xorg.freedesktop.org/archive/individual/driver/>
>>
>> If unsure, say Y.
>>
>
>> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
>> index abd64e8..43eea3a 100644
>> --- a/drivers/media/video/cx23885/cx23885-417.c
>> +++ b/drivers/media/video/cx23885/cx23885-417.c
>> @@ -7,7 +7,7 @@
>> * (c) 2008 Steven Toth<stoth@linuxtv.org>
>> * - CX23885/7/8 support
>> *
>> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
>> + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/),
>
> How about,
>
> + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/>
>
>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
>> index e46e1ce..821766e 100644
>> --- a/drivers/media/video/cx88/cx88-blackbird.c
>> +++ b/drivers/media/video/cx88/cx88-blackbird.c
>> @@ -9,7 +9,7 @@
>> * (c) 2005-2006 Mauro Carvalho Chehab<mchehab@infradead.org>
>> * - video_ioctl2 conversion
>> *
>> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
>> + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/),
>
>
> Same here.
>
>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>
>> diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
>> index 4d6a64c..8e201b8 100644
>> --- a/drivers/mtd/ftl.c
>> +++ b/drivers/mtd/ftl.c
>> @@ -51,7 +51,7 @@
>>
>> Use of the FTL format for non-PCMCIA applications may be an
>> infringement of these patents. For additional information,
>> - contact M-Systems (http://www.m-sys.com) directly.
>> + contact M-Systems directly. [M-Systems since acquired by Sandisk.].
>
>
> An entire sentence within parentheses is usually written like this:
>
> + contact M-Systems directly. [M-Systems since acquired by Sandisk.]
>
>
>>
>> ===================================*/
>> #include<linux/mtd/blktrans.h>
>
>> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
>> index db1dfc5..48894dc 100644
>> --- a/drivers/mtd/nand/cafe_nand.c
>> +++ b/drivers/mtd/nand/cafe_nand.c
>> @@ -2,7 +2,7 @@
>> * Driver for One Laptop Per Child ?CAF?? controller, aka Marvell 88ALP01
>> *
>> * The data sheet for this device can be found at:
>> - * http://www.marvell.com/products/pcconn/88ALP01.jsp
>> + * http://www.marvell.com/products/pc_connectivity/88alp01/
>
> No, it isn't there any longer. It is here though:
>
> http://wiki.laptop.org/go/Datasheets
>
>
>> *
>> * Copyright ? 2006 Red Hat, Inc.
>> * Copyright ? 2006 David Woodhouse<dwmw2@infradead.org>
>> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
>> index 2cc81a5..99fb1f6 100644
>> --- a/drivers/net/Kconfig
>> +++ b/drivers/net/Kconfig
>
>> @@ -1541,7 +1541,7 @@ config FEALNX
>> help
>> Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
>> cards. Specifications and data at
>> - <http://www.myson.com.hk/mtd/datasheet/>.
>> + <http://www.datasheetarchive.com/datasheet-pdf/022/DSA00384882.html>.
>
> Links to the datasheetarchive are probably redundant. We have search
> engines for that. Also, there are three devices supported by this driver
> and your link is only good for one of them, so searching is likely to be
> needed anyway.
>
> The site is actually http://www.myson.com.tw/ but there's no product
> information there any longer. I'd suggest this (also correcting the typo):
>
> - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
> - cards. Specifications and data at
> -<http://www.myson.com.hk/mtd/datasheet/>.
> + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
> + cards.<http://www.myson.com.tw/>
>
>
>
>>
>> config NATSEMI
>> tristate "National Semiconductor DP8381x series PCI Ethernet support"
>
>> http://www.national.com/pf/DP/DP83840A.html
>>
>
>> index c683f77..230158b 100644
>> --- a/drivers/net/pcmcia/3c574_cs.c
>> +++ b/drivers/net/pcmcia/3c574_cs.c
>> @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
>> V. References
>>
>> http://www.scyld.com/expert/NWay.html
>> -http://www.national.com/pf/DP/DP83840.html
>> +http://www.national.com/opf/DP/DP83840A.html#Overview
>
> No need for the "#Overview" anchor.
>
>
>>
>> Thanks to Terry Murphy of 3Com for providing development information for
>> earlier 3Com products.
>
>> diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h
>> index 150511a..45f5323 100644
>> --- a/drivers/net/sis900.h
>> +++ b/drivers/net/sis900.h
>> @@ -7,7 +7,7 @@
>> * preliminary Rev. 1.0 Nov. 10, 1998
>> * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
>> * preliminary Rev. 1.0 Jan. 18, 1998
>> - * http://www.sis.com.tw/support/databook.htm
>> + * http://www.sis.com/elibrary/elibrary_index00.htm
>
> The old URL is in the web archive, complete with the relevant datasheets.
> But if I follow your URL, I get nothing useful.
>
>
>> */
>>
>> /*
>
>> index b0342a5..024fccc 100644
>> --- a/drivers/net/wireless/p54/Kconfig
>> +++ b/drivers/net/wireless/p54/Kconfig
>> @@ -8,7 +8,7 @@ config P54_COMMON
>> also need to be enabled in order to support any devices.
>>
>> These devices require softmac firmware which can be found at
>> - http://prism54.org/
>> + http://wireless.kernel.org/en/users/Drivers/p54
>
>
> The convention seems to be angle brackets around URLS in Kconfig.
>
>
>>
>> If you choose to build a module, it'll be called p54common.
>>
>> @@ -20,7 +20,7 @@ config P54_USB
>> This driver is for USB isl38xx based wireless cards.
>>
>> These devices require softmac firmware which can be found at
>> - http://prism54.org/
>> + http://wireless.kernel.org/en/users/Drivers/p54
>
>
> Same.
>
>>
>> If you choose to build a module, it'll be called p54usb.
>>
>> @@ -34,7 +34,7 @@ config P54_PCI
>> supported by the fullmac driver/firmware.
>>
>> This driver requires softmac firmware which can be found at
>> - http://prism54.org/
>> + http://wireless.kernel.org/en/users/Drivers/p54
>>
>> If you choose to build a module, it'll be called p54pci.
>>
>
> Same.
>
>
>> @@ -205,7 +205,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir
>> /*
>> * VIA Apollo KT133 needs PCI latency patch
>> * Made according to a windows driver based patch by George E. Breese
>> - * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
>> + * see PCI Latency Adjust on http://www.georgebreese.com/net/software/#PCI
>
>
> The old link is in the web archive, but yours is also useful.
> Can't we have both?
>
>
>> * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
>> * the info on which Mr Breese based his work.
>> *
>
>> --- a/drivers/scsi/Kconfig
>> +++ b/drivers/scsi/Kconfig
>> @@ -949,7 +949,7 @@ config SCSI_IPS
>> depends on PCI&& SCSI
>> ---help---
>> This is support for the IBM ServeRAID hardware RAID controllers.
>> - See<http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
>> + See<http://www-947.ibm.com/support/entry/portal/docdisplay?brandP00008&lndocid=SERV-RAID>
>
> The old URL is in the web archive, complete with downloads. Please keep
> it around as there may be no other way to find that material.
>
>
>> for more information. If this driver does not work correctly
>> without modification please contact the author by email at
>> <ipslinux@adaptec.com>.
>
>> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
>> index b02bdc6..705f541 100644
>> --- a/drivers/scsi/scsi_debug.c
>> +++ b/drivers/scsi/scsi_debug.c
>> @@ -555,8 +555,8 @@ static int inquiry_evpd_84(unsigned char * arr)
>> static int inquiry_evpd_85(unsigned char * arr)
>> {
>> int num = 0;
>> - const char * na1 = "https://www.kernel.org/config";
>> - const char * na2 = "http://www.kernel.org/log";
>> + const char * na1 = "https://www.kernel.org";
>> + const char * na2 = "http://www.kernel.org";
>
>
> Why? These are deliberately fake, and deliberately different.
>
> BTW, a URL like http://www.kernel.org/ is supposed to have the slash at
> the end.
>
>
>> int plen, olen;
>>
>> arr[num++] = 0x1; /* lu, storage config */
>> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
>> index 24110f6..41a3ed8 100644
>> --- a/drivers/serial/8250.c
>> +++ b/drivers/serial/8250.c
>> @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
>> /*
>> * Exar ST16C2550 "A2" devices incorrectly detect as
>> * having an EFR, and report an ID of 0x0201. See
>> - * http://www.exar.com/info.php?pdfÚn180_oct2004.pdf
>> + * http://linux.derkeiler.com/pdf/Mailing-Lists/Kernel/2004-11/4812.pdf
>
>
> This link is better since it has the entire thread:
> http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
>
>
>> */
>> if (autoconfig_read_divisor_id(up) = 0x0201&& size_fifo(up) = 16)
>> return 1;
>
>> diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
>> index 96b9717..b6f77c5 100644
>> --- a/drivers/staging/asus_oled/README
>> +++ b/drivers/staging/asus_oled/README
>> @@ -2,7 +2,7 @@
>> Driver for Asus OLED display present in some Asus laptops.
>>
>> The code of this driver is based on 'asusoled' program taken from
>> - https://launchpad.net/asusoled/. I just wanted to have a simple
>> + http://lapsus.berlios.de/asus_oled.html. I just wanted to have a simple
>
>
> The trailing "." isn't helping. Put it inside angle brackets.
>
>
>> kernel driver for controlling this device, but I didn't know how
>> to do that. Now I know ;) Also, that program can not be used
>> with usbhid loaded, which means no USB mouse/keyboard while
>> diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
>> index 5b279fb..1cb2116 100644
>> --- a/drivers/staging/asus_oled/asus_oled.c
>> +++ b/drivers/staging/asus_oled/asus_oled.c
>> @@ -24,7 +24,7 @@
>> *
>> *
>> * Asus OLED support is based on asusoled program taken from
>> - * https://launchpad.net/asusoled/.
>> + * http://lapsus.berlios.de/asus_oled.html.
>
> Same here.
>
>
>> *
>> *
>> */
>> diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
>> index ced346a..e4cf861 100644
>> --- a/drivers/staging/comedi/drivers/cb_pcimdas.c
>> +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
>> @@ -37,7 +37,7 @@ Configuration Options:
>> Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
>> Only supports DIO, AO and simple AI in it's present form.
>> No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
>> -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
>> +See http://www.mccdaq.com/specs.aspx for more details.
>
> This loses information. Your patch removes the filename. For example,
> Googling that filename gives this:
>
> http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf
>
>
>> */
>>
>> #include "../comedidev.h"
>> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
>> index 6af6c83..ba5a980 100644
>> --- a/drivers/staging/comedi/drivers/daqboard2000.c
>> +++ b/drivers/staging/comedi/drivers/daqboard2000.c
>> @@ -51,7 +51,7 @@ Configuration options:
>> for the card, and here are the findings so far.
>>
>> 1. A good document that describes the PCI interface chip is found at:
>> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
>> + http://www.plxtech.com/products/io/pci9080
>
>
> Again, googling "9080db-106.pdf" locates the pdf, but it isn't available
> without registration using the link you provided. I suggest that you at
> least keep the filename (see above).
>
>>
>> 2. The initialization done so far is:
>> a. program the FPGA (windows code sans a lot of error messages)
>> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
>> index bd16f91..a2691db 100644
>> --- a/drivers/staging/comedi/drivers/ni_mio_common.c
>> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
>> @@ -34,7 +34,7 @@
>> 340747b.pdf AT-MIO E series Register Level Programmer Manual
>> 341079b.pdf PCI E Series RLPM
>> 340934b.pdf DAQ-STC reference manual
>> - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
>> + 67xx and 611x registers (from http://www.ni.com/pdf/manuals/340934b.pdf)
>> release_ni611x.pdf
>> release_ni67xx.pdf
>
> This is wrong. The URL you provided doesn't offer release_ni611x.pdf or
> release_ni67xx.pdf. Those two documents are here:
> ftp://ftp.ni.com/support/daq/mhddk/documentation/
>
>
>> Other possibly relevant info:
>> diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
>> index 485d63f..6c14b6b 100644
>> --- a/drivers/staging/comedi/drivers/plx9080.h
>> +++ b/drivers/staging/comedi/drivers/plx9080.h
>> @@ -13,7 +13,7 @@
>> *
>> ********************************************************************
>> *
>> - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
>> + * Copyright (C) 1999 RG Studio s.c.,
>
>
> You could lose the trailing comma.
>
>
>> * Written by Krzysztof Halasa<khc@rgstudio.com.pl>
>> *
>> * Portions (C) SBE Inc., used by permission.
>
>> diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
>> index 6612247..31b0a13 100644
>> --- a/drivers/staging/quickstart/quickstart.c
>> +++ b/drivers/staging/quickstart/quickstart.c
>> @@ -5,8 +5,7 @@
>> * Copyright (C) 2007-2010 Angelo Arrifano<miknix@gmail.com>
>> *
>> * Information gathered from disassebled dsdt and from here:
>> - * "http://download.microsoft.com/download/9/c/5/
>> - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
>> + * "http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx"
>
>
> Angle brackets would be better than quote marks.
>
>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig
>> index b5f78b6..fda68f7 100644
>> --- a/drivers/telephony/Kconfig
>> +++ b/drivers/telephony/Kconfig
>> @@ -31,7 +31,7 @@ config PHONE_IXJ
>> isapnp support. Please read<file:Documentation/telephony/ixj.txt>.
>>
>> For more information on these cards, see Quicknet's web site at:
>> - <http://www.quicknet.net/>.
>> + <http://www.qn.net/>.
>
>
> No, Quicknet Technologies (www.quicknet.net in the web archive) is not the
> same as Quicknet, Inc. The URL is in the web archive.
>
>
>>
>> If you do not have any Quicknet telephony cards, you can safely
>> say N here.
>> diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
>> index b53deee..872ee40 100644
>> --- a/drivers/telephony/ixj.c
>> +++ b/drivers/telephony/ixj.c
>> @@ -26,7 +26,7 @@
>> * Daniele Bellucci,<bellucda@tiscali.it>
>> *
>> * More information about the hardware related to this driver can be found
>> - * at our website: http://www.quicknet.net
>> + * at our website: http://www.qn.net/
>
>
> Same.
>
>
>> *
>> * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
>> * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
>> diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h
>> index 4c32a43..c012193 100644
>> --- a/drivers/telephony/ixj.h
>> +++ b/drivers/telephony/ixj.h
>> @@ -22,7 +22,7 @@
>> * Mike Preston,<mpreston@quicknet.net>
>> *
>> * More information about the hardware related to this driver can be found
>> - * at our website: http://www.quicknet.net
>> + * at our website: http://www.qn.net/
>
>
> Same.
>
>
>> *
>> * Fixes:
>> *
>> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
>> index 1da73ec..8d3ba1d 100644
>> --- a/drivers/uio/Kconfig
>> +++ b/drivers/uio/Kconfig
>> @@ -19,7 +19,7 @@ config UIO_CIF
>> Driver for Hilscher CIF DeviceNet and Profibus cards. This
>> driver requires a userspace component that handles all of the
>> heavy lifting and can be found at:
>> - http://www.osadl.org/projects/downloads/UIO/user/cif-*
>> + http://www.osadl.org/projects/downloads/UIO/user/
>
>
> The old link is correct. But it can be improved. For example --
>
> - driver requires a userspace component that handles all of the
> - heavy lifting and can be found at:
> - http://www.osadl.org/projects/downloads/UIO/user/cif-*
> + driver requires a userspace component called cif that handles
> + all of the heavy lifting and can be found at:
> + http://www.osadl.org/projects/downloads/UIO/user/
>
>
>
>>
>> To compile this driver as a module, choose M here: the module
>> will be called uio_cif.
>> diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
>> index 916b2b6..fc20f80 100644
>> --- a/drivers/usb/serial/Kconfig
>> +++ b/drivers/usb/serial/Kconfig
>> @@ -264,7 +264,7 @@ config USB_SERIAL_IUU
>> help
>> Say Y here if you want to use a IUU in phoenix mode and get
>> an extra ttyUSBx device. More information available on
>> - http://eczema.ecze.com/iuu_phoenix.html
>> + http://www.opensc-project.org/openct/wiki/wbeiuu
>
>
> The old URL is in the web archive. You don't have to use this IUU driver
> with OpenSC...
>
>
>>
>> To compile this driver as a module, choose M here: the
>> module will be called iuu_phoenix.o
>> @@ -289,7 +289,8 @@ config USB_SERIAL_KEYSPAN
>> and was developed with their support. You must also include
>> firmware to support your particular device(s).
>>
>> - See<http://misc.nu/hugh/keyspan.html> for more information.
>> + See<http://www.carnationsoftware.com/carnation/Keyspan.html>
>
>
> I dunno what Carnation Software has to do with it. Hugh's page moved
> here:
>
> http://blemings.org/hugh/keyspan.html
>
>
>
>> + for more information.
>>
>> To compile this driver as a module, choose M here: the
>> module will be called keyspan.
>> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
>> index 15a4583..2438ae0 100644
>> --- a/drivers/usb/serial/ftdi_sio_ids.h
>> +++ b/drivers/usb/serial/ftdi_sio_ids.h
>> @@ -335,7 +335,7 @@
>> #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
>>
>> /* ACT Solutions HomePro ZWave interface
>> - (http://www.act-solutions.com/HomePro.htm) */
>> + (http://www.act-solutions.com/index.php) */
>
>
> A better link is,
> http://www.act-solutions.com/HomePro-Product-Matrix.html
>
>
>> #define FTDI_ACTZWAVE_PID 0xF2D0
>>
>> /*
>> @@ -434,7 +434,7 @@
>>
>> /*
>> * PCDJ use ftdi based dj-controllers. The following PID is
>> - * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
>> + * for their DAC-2 device http://pcdj.com/index.php/support/dex_dac_2/
>
>
> That's not the same page. The old one is in the web archive, so no patch
> needed.
>
>
>> * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
>> */
>> #define FTDI_PCDJ_DAC2_PID 0xFA88
>
>> @@ -723,7 +723,7 @@
>>
>> /*
>> * Bayer Ascensia Contour blood glucose meter USB-converter cable.
>> - * http://winglucofacts.com/cables/
>> + * http://www.simplewins.com/Default.aspx
>
>
>
> The old link is valid. Your URL has this:
> http://www.simplewins.com/site/Adults/Monitor/Pages/Bayer-Products/Contour-USB
> but who's to say whether it has the same PID/VID? I don't know...
>
>> */
>> #define BAYER_VID 0x1A79
>> #define BAYER_CONTOUR_CABLE_PID 0x6001
>
>
>> diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
>> index 297163c..9240914 100644
>> --- a/drivers/usb/serial/keyspan.c
>> +++ b/drivers/usb/serial/keyspan.c
>> @@ -9,7 +9,7 @@
>> the Free Software Foundation; either version 2 of the License, or
>> (at your option) any later version.
>>
>> - See http://misc.nu/hugh/keyspan.html for more information.
>> + See http://www.carnationsoftware.com/carnation/Keyspan.html for more information.
>
>
> As above,
> http://blemings.org/hugh/keyspan.html
>
>
>>
>> Code in this driver inspired by and in a number of places taken
>> from Brian Warner's original Keyspan-PDA driver.
>> diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
>> index bf3297d..f8b6a41 100644
>> --- a/drivers/usb/serial/keyspan.h
>> +++ b/drivers/usb/serial/keyspan.h
>> @@ -9,7 +9,7 @@
>> the Free Software Foundation; either version 2 of the License, or
>> (at your option) any later version.
>>
>> - See http://misc.nu/hugh/keyspan.html for more information.
>> + See http://www.carnationsoftware.com/carnation/Keyspan.html for more information.
>
>
> http://blemings.org/hugh/keyspan.html
>
>
>>
>> Code in this driver inspired by and in a number of places taken
>> from Brian Warner's original Keyspan-PDA driver.
>> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
>> index 3a3f5e6..6f773c4 100644
>> --- a/drivers/usb/serial/mct_u232.h
>> +++ b/drivers/usb/serial/mct_u232.h
>> @@ -10,10 +10,10 @@
>> *
>> * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
>> * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
>> - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
>> - * information. The properties of this device are listed at the end of this
>> - * file. This device is available from various distributors. I know Hana,
>> - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
>> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
>> + * for further information. The properties of this device are listed at the end
>> + * of this file. This device is available from various distributors.
>> + * D-Link, http://www.dlink.com/products/usb/dsbs25.
>
>
> The trailing "." should go. How about this --
>
> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
> + * for further information. The properties of this device are listed at the end
> + * of this file. This device was used in the Dlink DSB-S25.
>
>
>> *
>> * All of the information about the device was acquired by using SniffUSB
>> * on Windows98. The technical details of the reverse engineering are
>
>> diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
>> index 8a372ba..b356e15 100644
>> --- a/drivers/usb/storage/Kconfig
>> +++ b/drivers/usb/storage/Kconfig
>> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
>> index 8b31fdf..a07fc57 100644
>> --- a/drivers/video/Kconfig
>> +++ b/drivers/video/Kconfig
>> @@ -1323,7 +1323,7 @@ config FB_RADEON
>> don't need to choose this to run the Radeon in plain VGA mode.
>>
>> There is a product page at
>> - http://apps.ati.com/ATIcompare/
>> + http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx
>
>
> There's no hardware product information at the URL you gave. It is a
> brouchure for AMD's Catalyst software. Here is the URL for the product
> specs:
>
> http://products.amd.com/en-us/GraphicCardResult.aspx
>
>
>
>>
>> config FB_RADEON_I2C
>> bool "DDC/I2C for ATI Radeon support"
>> @@ -1395,7 +1395,7 @@ config FB_ATY_CT
>> Say Y here to support use of ATI's 64-bit Rage boards (or other
>> boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
>> framebuffer device. The ATI product support page for these boards
>> - is at<http://support.ati.com/products/pc/mach64/>.
>> + is at<http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx>.
>
> Why? Catalyst is not related to Mach64. Here's the URL you want:
>
> http://support.ati.com/products/pc/mach64/mach64.html
>
> You won't find any info at amd.com but at least it works in the web
> archive, which is a huge improvement.
>
>
>
>>
>> config FB_ATY_GENERIC_LCD
>> bool "Mach64 generic LCD support (EXPERIMENTAL)"
>
>> diff --git a/fs/nls/nls_euc-jp.c b/fs/nls/nls_euc-jp.c
>> index 7424929..d7d5526 100644
>> --- a/fs/nls/nls_euc-jp.c
>> +++ b/fs/nls/nls_euc-jp.c
>> @@ -3,7 +3,7 @@
>> *
>> * Added `OSF/JVC Recommended Code Set Conversion Specification
>> * between Japanese EUC and Shift-JIS' support:<hirofumi@mail.parknet.co.jp>
>> - * (http://www.opengroup.or.jp/jvc/cde/sjis-euc-e.html)
>> + * (http://www.opengroup.or.jp/)
>
>
> The document is in the web archive, and not at your URL, so this is
> damage.
>
>
>> */
>>
>> #include<linux/module.h>
>
>> diff --git a/include/crypto/b128ops.h b/include/crypto/b128ops.h
>> index 0b8e6bc..499741c 100644
>> --- a/include/crypto/b128ops.h
>> +++ b/include/crypto/b128ops.h
>> @@ -4,7 +4,7 @@
>> * Copyright (c) 2006, Rik Snel<rsnel@cube.dyndns.org>
>> *
>> * Based on Dr Brian Gladman's (GPL'd) work published at
>> - * http://fp.gladman.plus.com/cryptography_technology/index.htm
>> + * http://www.gladman.me.uk/
>
>
> Well, it doesn't say "Based on Dr Brian Gladman's latest work". The
> original is in the web archive so no patch is needed I think...
>
>
>> * See the original copyright notice below.
>> *
>> * This program is free software; you can redistribute it and/or modify it
>> diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
>> index 4086b8e..7021c6c 100644
>> --- a/include/crypto/gf128mul.h
>> +++ b/include/crypto/gf128mul.h
>> @@ -4,7 +4,7 @@
>> * Copyright (c) 2006 Rik Snel<rsnel@cube.dyndns.org>
>> *
>> * Based on Dr Brian Gladman's (GPL'd) work published at
>> - * http://fp.gladman.plus.com/cryptography_technology/index.htm
>> + * http://www.gladman.me.uk/
>
> Same here.
>
>
>> * See the original copyright notice below.
>> *
>> * This program is free software; you can redistribute it and/or modify it
>> @@ -54,8 +54,8 @@
>>
>> /* Comment by Rik:
>> *
>> - * For some background on GF(2^128) see for example: http://-
>> - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
>> + * For some background on GF(2^128) see for example:
>> + * http://www.cryptobarn.com/papers/gcm-spec.pdf
>
>
> This is the correct URL:
> http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
>
>
>> *
>> * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
>> * be mapped to computer memory in a variety of ways. Let's examine
>
>> diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
>> index 88b4589..594d871 100644
>> --- a/include/linux/ixjuser.h
>> +++ b/include/linux/ixjuser.h
>> @@ -25,7 +25,7 @@
>> * Mike Preston,<mpreston@quicknet.net>
>> *
>> * More information about the hardware related to this driver can be found
>> - * at our website: http://www.quicknet.net
>> + * at our website: http://www.qn.net/
>
> See above.
>
>
>> *
>> * Fixes:
>> *
>> diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
>> index de24af7..60d73a6 100644
>> --- a/include/linux/n_r3964.h
>> +++ b/include/linux/n_r3964.h
>> @@ -4,7 +4,7 @@
>> * Copyright by
>> * Philips Automation Projects
>> * Kassel (Germany)
>> - * http://www.pap-philips.de
>> + * http://www.pronto.philips.com/index.cfm?id\x1292
>
>
> This URL you have provided is certainly pap but otherwise it doesn't
> relate. The URL you removed looks like advertising for a division that
> doesn't exist any longer, apparently spun off as KH-Automaton Projects
> GmbH. I'd remove it too.
>
>
>> * -----------------------------------------------------------
>> * This software may be used and distributed according to the terms of
>> * the GNU General Public License, incorporated herein by reference.
>
>> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
>> index 571f895..a90050d 100644
>> --- a/net/ipv4/Kconfig
>> +++ b/net/ipv4/Kconfig
>> @@ -84,7 +84,7 @@ config IP_FIB_TRIE
>>
>> An experimental study of compression methods for dynamic tries
>> Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
>> - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
>> + http://www.csc.kth.se/~snilsson/software/dyntrie2/
>>
>> endchoice
>>
>> @@ -555,7 +555,7 @@ config TCP_CONG_VENO
>> distinguishing to circumvent the difficult judgment of the packet loss
>> type. TCP Veno cuts down less congestion window in response to random
>> loss packets.
>> - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
>> + See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
>
> You wouldn't guess from looking at either of these links, but the
> citation is actually this paper:
>
> C.P. Fu and S.C. Liew. "TCP Veno: TCP Enhancement for Transmission
> Over wireless Access Networks," IEEE Journal on Selected Areas in
> Communication, February 2003.
>
>
>>
>> config TCP_CONG_YEAH
>> tristate "YeAH TCP"
>
>> diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
>> index 1833bdb..d6a784c 100644
>> --- a/net/ipv4/netfilter/Kconfig
>> +++ b/net/ipv4/netfilter/Kconfig
>> @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
>> which can only be viewed through syslog.
>>
>> The appropriate userspace logging daemon (ulogd) may be obtained from
>> - <http://www.gnumonks.org/projects/ulogd/>
>> + <http://www.gnumonks.org/projects/>
>
>
> Well I tried to obtain ulogd there but I couldn't find it.
> It is available here though:
> http://www.netfilter.org/projects/ulogd/index.html
>
>
>>
>> To compile it as a module, choose M here. If unsure, say N.
>>
>
>> diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c
>> index 20151d6..bbf0e99 100644
>> --- a/net/ipv4/tcp_westwood.c
>> +++ b/net/ipv4/tcp_westwood.c
>> @@ -3,7 +3,7 @@
>> *
>> * Angelo Dell'Aera: author of the first version of TCP Westwood+ in Linux 2.4
>> *
>> - * Support at http://c3lab.poliba.it/index.php/Westwood
>> + * Support at http://www.cs.ucla.edu/NRL/hpi/tcpw/
>
> I wouldn't think that you'd get support there. It claims to be the
> homepage for a BSD based implementation of TCP Westwood. In anycase,
> google cached the poliba.it link on 19 Sep 2010, so I don't think this
> needs to be patched. Besides, it is also in the web archive.
>
>
>> * Main references in literature:
>> *
>> * - Mascolo S, Casetti, M. Gerla et al.
>
>>
>> The boundaries and the conditions are changed according to RFC793:
>> the packet must intersect the window (i.e. segments may be
>> diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
>> index 456a1b4..e2c5fe9 100644
>> --- a/sound/oss/ac97_codec.c
>> +++ b/sound/oss/ac97_codec.c
>> @@ -22,10 +22,7 @@
>> **************************************************************************
>> *
>> * The Intel Audio Codec '97 specification is available at the Intel
>
> "is available at:"
>
>
>> - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
>> - *
>> - * The specification itself is currently available at:
>> - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
>> + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
>> *
>> **************************************************************************
>> *
>> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
>> index c7fba53..deffcc8 100644
>> --- a/sound/pci/ens1370.c
>> +++ b/sound/pci/ens1370.c
>> @@ -22,7 +22,7 @@
>> /* Power-Management-Code ( CONFIG_PM )
>> * for ens1371 only ( FIXME )
>> * derived from cs4281.c, atiixp.c and via82xx.c
>> - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
>> + * using http://www.kernel.org/pub/linux/kernel/people/tiwai/docs/writing-an-alsa-driver/index.html
>
>
> I think this is a better choice:
> http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
>
>
>> * by Kurt J. Bosch
>> */
>>
>
> Thanks.
>
> Finn
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-09-26 13:42 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1285373337-10945-1-git-send-email-justinmattock@gmail.com>
[not found] ` <1285373337-10945-1-git-send-email-justinmattock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2010-09-25 0:08 ` [RFC 2/3 v3]update web addresses in stagging Justin P. Mattock
2010-09-25 0:34 ` Greg KH
2010-09-25 0:51 ` Justin P. Mattock
[not found] ` <4C9D47AC.6000002-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2010-09-25 20:47 ` Matthew Dharm
2010-09-25 21:30 ` Justin P. Mattock
2010-09-26 9:43 ` [RFC 1/3 v3]update web addresses in the kernel Finn Thain
2010-09-26 13:42 ` Justin P. Mattock
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).