Linux Framebuffer Layer development
 help / color / mirror / Atom feed
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
To: linux-fbdev@vger.kernel.org
Subject: Re: [PATCH 8/9] drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data
Date: Mon, 03 Oct 2011 15:48:01 +0000	[thread overview]
Message-ID: <4E89D931.30305@gmx.de> (raw)
In-Reply-To: <1317244795-24671-8-git-send-email-timur@freescale.com>

On 09/28/2011 09:19 PM, Timur Tabi wrote:
> The diu_hw structure contains two fields used to access the DIU registers,
> but the only instance of this structure is a global variable, 'dr'.
> Eliminate 'dr' by merging its fields into the fsl_diu_data structure,
> which is instantiated on the heap for each DIU controller found.
> 
> Signed-off-by: Timur Tabi <timur@freescale.com>
> ---
>  drivers/video/fsl-diu-fb.c |   71 ++++++++++++++++++++-----------------------
>  1 files changed, 33 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
> index 41f767b..728cd9f 100644
> --- a/drivers/video/fsl-diu-fb.c
> +++ b/drivers/video/fsl-diu-fb.c
> @@ -49,11 +49,6 @@
>  #define INT_PARERR	0x08	/* Display parameters error interrupt */
>  #define INT_LS_BF_VS	0x10	/* Lines before vsync. interrupt */
>  
> -struct diu_hw {
> -	struct diu __iomem *diu_reg;
> -	spinlock_t reg_lock;
> -};
> -
>  struct diu_addr {
>  	void *vaddr;		/* Virtual address */
>  	dma_addr_t paddr;	/* Physical address */
> @@ -351,6 +346,9 @@ struct fsl_diu_data {
>  	unsigned int irq;
>  	int fb_enabled;
>  	enum fsl_diu_monitor_port monitor_port;
> +	struct diu __iomem *diu_reg;
> +	spinlock_t reg_lock;
> +	unsigned int mode;		/* DIU operation mode */

Any reason that you added here a new "mode" var that appears to be useless when
you just deleted the mode variable in patch 7/9?


Regards,

Florian Tobias Schandinat

>  };
>  
>  enum mfb_index {
> @@ -424,10 +422,6 @@ static struct mfb_info mfb_template[] = {
>  	},
>  };
>  
> -static struct diu_hw dr = {
> -	.reg_lock = __SPIN_LOCK_UNLOCKED(diu_hw.reg_lock),
> -};
> -
>  static struct diu_pool pool;
>  
>  /**
> @@ -506,9 +500,9 @@ void wr_reg_wa(u32 *reg, u32 val)
>  static void fsl_diu_enable_panel(struct fb_info *info)
>  {
>  	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
> -	struct diu *hw = dr.diu_reg;
>  	struct diu_ad *ad = mfbi->ad;
>  	struct fsl_diu_data *machine_data = mfbi->parent;
> +	struct diu __iomem *hw = machine_data->diu_reg;
>  
>  	switch (mfbi->index) {
>  	case PLANE0:
> @@ -559,9 +553,9 @@ static void fsl_diu_enable_panel(struct fb_info *info)
>  static void fsl_diu_disable_panel(struct fb_info *info)
>  {
>  	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
> -	struct diu *hw = dr.diu_reg;
>  	struct diu_ad *ad = mfbi->ad;
>  	struct fsl_diu_data *machine_data = mfbi->parent;
> +	struct diu __iomem *hw = machine_data->diu_reg;
>  
>  	switch (mfbi->index) {
>  	case PLANE0:
> @@ -613,9 +607,9 @@ static void fsl_diu_disable_panel(struct fb_info *info)
>  
>  static void enable_lcdc(struct fb_info *info)
>  {
> -	struct diu *hw = dr.diu_reg;
>  	struct mfb_info *mfbi = info->par;
>  	struct fsl_diu_data *machine_data = mfbi->parent;
> +	struct diu __iomem *hw = machine_data->diu_reg;
>  
>  	if (!machine_data->fb_enabled) {
>  		out_be32(&hw->diu_mode, MFB_MODE1);
> @@ -625,9 +619,9 @@ static void enable_lcdc(struct fb_info *info)
>  
>  static void disable_lcdc(struct fb_info *info)
>  {
> -	struct diu *hw = dr.diu_reg;
>  	struct mfb_info *mfbi = info->par;
>  	struct fsl_diu_data *machine_data = mfbi->parent;
> +	struct diu __iomem *hw = machine_data->diu_reg;
>  
>  	if (machine_data->fb_enabled) {
>  		out_be32(&hw->diu_mode, 0);
> @@ -822,13 +816,13 @@ static void update_lcdc(struct fb_info *info)
>  	struct fb_var_screeninfo *var = &info->var;
>  	struct mfb_info *mfbi = info->par;
>  	struct fsl_diu_data *machine_data = mfbi->parent;
> -	struct diu *hw;
> +	struct diu __iomem *hw;
>  	int i, j;
>  	char __iomem *cursor_base, *gamma_table_base;
>  
>  	u32 temp;
>  
> -	hw = dr.diu_reg;
> +	hw = machine_data->diu_reg;
>  
>  	diu_ops.set_monitor_port(machine_data->monitor_port);
>  	gamma_table_base = pool.gamma.vaddr;
> @@ -939,9 +933,9 @@ static int fsl_diu_set_par(struct fb_info *info)
>  	struct mfb_info *mfbi = info->par;
>  	struct fsl_diu_data *machine_data = mfbi->parent;
>  	struct diu_ad *ad = mfbi->ad;
> -	struct diu *hw;
> +	struct diu __iomem *hw;
>  
> -	hw = dr.diu_reg;
> +	hw = machine_data->diu_reg;
>  
>  	set_fix(info);
>  	mfbi->cursor_reset = 1;
> @@ -1336,7 +1330,7 @@ static void uninstall_fb(struct fb_info *info)
>  
>  static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
>  {
> -	struct diu *hw = dr.diu_reg;
> +	struct diu __iomem *hw = dev_id;
>  	unsigned int status = in_be32(&hw->int_status);
>  
>  	if (status) {
> @@ -1362,18 +1356,16 @@ static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
>  	return IRQ_NONE;
>  }
>  
> -static int request_irq_local(int irq)
> +static int request_irq_local(struct fsl_diu_data *machine_data)
>  {
> +	struct diu __iomem *hw = machine_data->diu_reg;
>  	u32 ints;
> -	struct diu *hw;
>  	int ret;
>  
> -	hw = dr.diu_reg;
> -
>  	/* Read to clear the status */
>  	in_be32(&hw->int_status);
>  
> -	ret = request_irq(irq, fsl_diu_isr, 0, "fsl-diu-fb", NULL);
> +	ret = request_irq(machine_data->irq, fsl_diu_isr, 0, "fsl-diu-fb", hw);
>  	if (!ret) {
>  		ints = INT_PARERR | INT_LS_BF_VS;
>  #if !defined(CONFIG_NOT_COHERENT_CACHE)
> @@ -1388,14 +1380,14 @@ static int request_irq_local(int irq)
>  	return ret;
>  }
>  
> -static void free_irq_local(int irq)
> +static void free_irq_local(struct fsl_diu_data *machine_data)
>  {
> -	struct diu *hw = dr.diu_reg;
> +	struct diu __iomem *hw = machine_data->diu_reg;
>  
>  	/* Disable all LCDC interrupt */
>  	out_be32(&hw->int_mask, 0x1f);
>  
> -	free_irq(irq, NULL);
> +	free_irq(machine_data->irq, NULL);
>  }
>  
>  #ifdef CONFIG_PM
> @@ -1513,6 +1505,9 @@ static int __devinit fsl_diu_probe(struct platform_device *pdev)
>  	if (!machine_data)
>  		return -ENOMEM;
>  
> +	machine_data->mode = MFB_MODE1;
> +	spin_lock_init(&machine_data->reg_lock);
> +
>  	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
>  		machine_data->fsl_diu_info[i] >  			framebuffer_alloc(sizeof(struct mfb_info), &pdev->dev);
> @@ -1537,16 +1532,16 @@ static int __devinit fsl_diu_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	dr.diu_reg = of_iomap(np, 0);
> -	if (!dr.diu_reg) {
> +	machine_data->diu_reg = of_iomap(np, 0);
> +	if (!machine_data->diu_reg) {
>  		dev_err(&pdev->dev, "cannot map DIU registers\n");
>  		ret = -EFAULT;
>  		goto error2;
>  	}
>  
> -	diu_mode = in_be32(&dr.diu_reg->diu_mode);
> +	diu_mode = in_be32(&machine_data->diu_reg->diu_mode);
>  	if (diu_mode = MFB_MODE0)
> -		out_be32(&dr.diu_reg->diu_mode, 0);	/* disable DIU */
> +		out_be32(&machine_data->diu_reg->diu_mode, 0); /* disable DIU */
>  
>  	/* Get the IRQ of the DIU */
>  	machine_data->irq = irq_of_parse_and_map(np, 0);
> @@ -1599,10 +1594,11 @@ static int __devinit fsl_diu_probe(struct platform_device *pdev)
>  	 * by the bootloader, set dummy area descriptor otherwise.
>  	 */
>  	if (diu_mode = MFB_MODE0)
> -		out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
> +		out_be32(&machine_data->diu_reg->desc[0],
> +			 machine_data->dummy_ad->paddr);
>  
> -	out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
> -	out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
> +	out_be32(&machine_data->diu_reg->desc[1], machine_data->dummy_ad->paddr);
> +	out_be32(&machine_data->diu_reg->desc[2], machine_data->dummy_ad->paddr);
>  
>  	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
>  		machine_data->fsl_diu_info[i]->fix.smem_start = 0;
> @@ -1617,7 +1613,7 @@ static int __devinit fsl_diu_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	if (request_irq_local(machine_data->irq)) {
> +	if (request_irq_local(machine_data)) {
>  		dev_err(&pdev->dev, "could not claim irq\n");
>  		goto error;
>  	}
> @@ -1651,7 +1647,7 @@ error:
>  			 32);
>  	if (machine_data->dummy_aoi_virt)
>  		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
> -	iounmap(dr.diu_reg);
> +	iounmap(machine_data->diu_reg);
>  
>  error2:
>  	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
> @@ -1669,7 +1665,7 @@ static int fsl_diu_remove(struct platform_device *pdev)
>  
>  	machine_data = dev_get_drvdata(&pdev->dev);
>  	disable_lcdc(machine_data->fsl_diu_info[0]);
> -	free_irq_local(machine_data->irq);
> +	free_irq_local(machine_data);
>  	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
>  		uninstall_fb(machine_data->fsl_diu_info[i]);
>  	if (pool.ad.vaddr)
> @@ -1681,7 +1677,7 @@ static int fsl_diu_remove(struct platform_device *pdev)
>  		free_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
>  	if (machine_data->dummy_aoi_virt)
>  		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
> -	iounmap(dr.diu_reg);
> +	iounmap(machine_data->diu_reg);
>  	for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
>  		if (machine_data->fsl_diu_info[i])
>  			framebuffer_release(machine_data->fsl_diu_info[i]);
> @@ -1804,7 +1800,6 @@ static int __init fsl_diu_init(void)
>  #if defined(CONFIG_NOT_COHERENT_CACHE)
>  		vfree(coherence_data);
>  #endif
> -		iounmap(dr.diu_reg);
>  	}
>  	return ret;
>  }


  reply	other threads:[~2011-10-03 15:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-28 21:19 [PATCH 8/9] drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data Timur Tabi
2011-10-03 15:48 ` Florian Tobias Schandinat [this message]
2011-10-03 15:58 ` Timur Tabi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E89D931.30305@gmx.de \
    --to=florianschandinat@gmx.de \
    --cc=linux-fbdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox