* [PATCH 3/15] i810: fix module_param bool abuse.
@ 2011-12-15 3:15 Rusty Russell
2011-12-19 23:16 ` Florian Tobias Schandinat
0 siblings, 1 reply; 4+ messages in thread
From: Rusty Russell @ 2011-12-15 3:15 UTC (permalink / raw)
To: lkml - Kernel Mailing List; +Cc: Antonino Daplas
The driver says "module_param(ddc3, bool, 0);". But it's not a used
as a bool, it's used as a count.
Make it a bool.
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
drivers/video/i810/i810_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -147,7 +147,7 @@ static int vyres __devinitdata;
static int sync __devinitdata;
static int extvga __devinitdata;
static int dcolor __devinitdata;
-static int ddc3 __devinitdata = 2;
+static bool ddc3 __devinitdata;
/*------------------------------------------------------------*/
@@ -1776,7 +1776,7 @@ static void __devinit i810_init_defaults
if (sync)
par->dev_flags |= ALWAYS_SYNC;
- par->ddc_num = ddc3;
+ par->ddc_num = (ddc3 ? 3 : 2);
if (bpp < 8)
bpp = 8;
@@ -1999,7 +1999,7 @@ static int __devinit i810fb_setup(char *
else if (!strncmp(this_opt, "dcolor", 6))
dcolor = 1;
else if (!strncmp(this_opt, "ddc3", 4))
- ddc3 = 3;
+ ddc3 = true;
else
mode_option = this_opt;
}
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 3/15] i810: fix module_param bool abuse.
2011-12-15 3:15 [PATCH 3/15] i810: fix module_param bool abuse Rusty Russell
@ 2011-12-19 23:16 ` Florian Tobias Schandinat
2012-01-12 23:09 ` Rusty Russell
0 siblings, 1 reply; 4+ messages in thread
From: Florian Tobias Schandinat @ 2011-12-19 23:16 UTC (permalink / raw)
To: Rusty Russell
Cc: lkml - Kernel Mailing List, Antonino Daplas, linux-fbdev,
Pawel Moll
On 12/15/2011 03:03 AM, Rusty Russell wrote:
> The driver says "module_param(ddc3, bool, 0);". But it's not a used
> as a bool, it's used as a count.
>
> Make it a bool.
>
> Cc: Antonino Daplas <adaplas@gmail.com>
> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
> Cc: linux-fbdev@vger.kernel.org
> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> drivers/video/i810/i810_main.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
> --- a/drivers/video/i810/i810_main.c
> +++ b/drivers/video/i810/i810_main.c
> @@ -147,7 +147,7 @@ static int vyres __devinitdata;
> static int sync __devinitdata;
> static int extvga __devinitdata;
> static int dcolor __devinitdata;
> -static int ddc3 __devinitdata = 2;
> +static bool ddc3 __devinitdata;
>
> /*------------------------------------------------------------*/
>
> @@ -1776,7 +1776,7 @@ static void __devinit i810_init_defaults
> if (sync)
> par->dev_flags |= ALWAYS_SYNC;
>
> - par->ddc_num = ddc3;
> + par->ddc_num = (ddc3 ? 3 : 2);
>
> if (bpp < 8)
> bpp = 8;
> @@ -1999,7 +1999,7 @@ static int __devinit i810fb_setup(char *
> else if (!strncmp(this_opt, "dcolor", 6))
> dcolor = 1;
> else if (!strncmp(this_opt, "ddc3", 4))
> - ddc3 = 3;
> + ddc3 = true;
> else
> mode_option = this_opt;
> }
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 3/15] i810: fix module_param bool abuse.
2011-12-19 23:16 ` Florian Tobias Schandinat
@ 2012-01-12 23:09 ` Rusty Russell
2012-01-12 23:36 ` Florian Tobias Schandinat
0 siblings, 1 reply; 4+ messages in thread
From: Rusty Russell @ 2012-01-12 23:09 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: lkml - Kernel Mailing List, Antonino Daplas, linux-fbdev,
Pawel Moll
On Mon, 19 Dec 2011 23:16:04 +0000, Florian Tobias Schandinat <FlorianSchandinat@gmx.de> wrote:
> On 12/15/2011 03:03 AM, Rusty Russell wrote:
> > The driver says "module_param(ddc3, bool, 0);". But it's not a used
> > as a bool, it's used as a count.
> >
> > Make it a bool.
> >
> > Cc: Antonino Daplas <adaplas@gmail.com>
> > Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
> > Cc: linux-fbdev@vger.kernel.org
> > Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
>
> Applied.
Hmm, I don't see this in Linus' tree yet, and it's a context-clash
pre-requisite for part of the general driver bool conversion. I want to
push today since I have linux.conf.au next week, so I've split the i810
conversion into a separate patch, below.
It's been over a week in linux-next, can you push this please?
From: Rusty Russell <rusty@rustcorp.com.au>
Subject: module_param: make bool parameters really bool (drivers/vidio/i810)
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -135,8 +135,8 @@ static struct pci_driver i810fb_driver static char *mode_option __devinitdata = NULL;
static int vram __devinitdata = 4;
static int bpp __devinitdata = 8;
-static int mtrr __devinitdata;
-static int accel __devinitdata;
+static bool mtrr __devinitdata;
+static bool accel __devinitdata;
static int hsync1 __devinitdata;
static int hsync2 __devinitdata;
static int vsync1 __devinitdata;
@@ -144,9 +144,9 @@ static int vsync2 __devinitdata;
static int xres __devinitdata;
static int yres;
static int vyres __devinitdata;
-static int sync __devinitdata;
-static int extvga __devinitdata;
-static int dcolor __devinitdata;
+static bool sync __devinitdata;
+static bool extvga __devinitdata;
+static bool dcolor __devinitdata;
static bool ddc3 __devinitdata;
/*------------------------------------------------------------*/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 3/15] i810: fix module_param bool abuse.
2012-01-12 23:09 ` Rusty Russell
@ 2012-01-12 23:36 ` Florian Tobias Schandinat
0 siblings, 0 replies; 4+ messages in thread
From: Florian Tobias Schandinat @ 2012-01-12 23:36 UTC (permalink / raw)
To: Rusty Russell
Cc: lkml - Kernel Mailing List, Antonino Daplas, linux-fbdev,
Pawel Moll
Hi Rusty,
On 01/12/2012 10:57 PM, Rusty Russell wrote:
> On Mon, 19 Dec 2011 23:16:04 +0000, Florian Tobias Schandinat <FlorianSchandinat@gmx.de> wrote:
>> On 12/15/2011 03:03 AM, Rusty Russell wrote:
>>> The driver says "module_param(ddc3, bool, 0);". But it's not a used
>>> as a bool, it's used as a count.
>>>
>>> Make it a bool.
>>>
>>> Cc: Antonino Daplas <adaplas@gmail.com>
>>> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
>>> Cc: linux-fbdev@vger.kernel.org
>>> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
>>
>> Applied.
>
> Hmm, I don't see this in Linus' tree yet, and it's a context-clash
> pre-requisite for part of the general driver bool conversion. I want to
> push today since I have linux.conf.au next week, so I've split the i810
> conversion into a separate patch, below.
Sorry for the delay, but with an OMAP pull and a revert this merge window is not
as quiet as I wished.
> It's been over a week in linux-next, can you push this please?
Sure, I've taken it and also fixed the subject.
Best regards,
Florian Tobias Schandinat
>
> From: Rusty Russell <rusty@rustcorp.com.au>
> Subject: module_param: make bool parameters really bool (drivers/vidio/i810)
>
> module_param(bool) used to counter-intuitively take an int. In
> fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
> trick.
>
> It's time to remove the int/unsigned int option. For this version
> it'll simply give a warning, but it'll break next kernel version.
>
> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
>
> diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
> --- a/drivers/video/i810/i810_main.c
> +++ b/drivers/video/i810/i810_main.c
> @@ -135,8 +135,8 @@ static struct pci_driver i810fb_driver > static char *mode_option __devinitdata = NULL;
> static int vram __devinitdata = 4;
> static int bpp __devinitdata = 8;
> -static int mtrr __devinitdata;
> -static int accel __devinitdata;
> +static bool mtrr __devinitdata;
> +static bool accel __devinitdata;
> static int hsync1 __devinitdata;
> static int hsync2 __devinitdata;
> static int vsync1 __devinitdata;
> @@ -144,9 +144,9 @@ static int vsync2 __devinitdata;
> static int xres __devinitdata;
> static int yres;
> static int vyres __devinitdata;
> -static int sync __devinitdata;
> -static int extvga __devinitdata;
> -static int dcolor __devinitdata;
> +static bool sync __devinitdata;
> +static bool extvga __devinitdata;
> +static bool dcolor __devinitdata;
> static bool ddc3 __devinitdata;
>
> /*------------------------------------------------------------*/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-01-12 23:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-12-15 3:15 [PATCH 3/15] i810: fix module_param bool abuse Rusty Russell
2011-12-19 23:16 ` Florian Tobias Schandinat
2012-01-12 23:09 ` Rusty Russell
2012-01-12 23:36 ` Florian Tobias Schandinat
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).