From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Subject: Re: [GIT PULL] OMAP DSS for v3.3
Date: Mon, 09 Jan 2012 02:40:58 +0000 [thread overview]
Message-ID: <4F0A53BA.1070605@gmx.de> (raw)
In-Reply-To: <1325753792.2045.42.camel@deskari>
Hi Tomi,
On 01/05/2012 08:56 AM, Tomi Valkeinen wrote:
> Hi Florian,
>
> Here are changes to OMAP display subsystem driver for the merge window.
>
> This merges and works fine with v3.2, and also merges fine with
> linux-next. I haven't been able to test with linux-next as there seems
> to be other brokenness there.
Pulled. I hope the problem with linux-next will be resolved before the final
kernel is released.
Thanks,
Florian Tobias Schandinat
>
> Tomi
>
> The following changes since commit 5611cc4572e889b62a7b4c72a413536bf6a9c416:
>
> Linux 3.2-rc4 (2011-12-01 14:56:01 -0800)
>
> are available in the git repository at:
> git://gitorious.org/linux-omap-dss2/linux.git for-florian
>
> Archit Taneja (3):
> OMAPDSS: DSI: Fix HSDIV related PLL info in dsi_dump_clocks()
> OMAPDSS: Panel NEC: Set omap_dss_device states correctly
> OMAPDSS: Displays: Make PICODLP driver depend on DPI
>
> Axel Lin (2):
> video: omap: Staticise non-exported symbols
> video: omap: convert drivers/video/omap/* to use module_platform_driver()
>
> Chandrabhanu Mahapatra (2):
> OMAPDSS: DISPC: Update Fir Coefficients
> OMAPDSS: DISPC: Update Scaling Clock Logic
>
> Daniel Mack (1):
> OMAP: DSS2: Support for UMSH-8173MD TFT panel
>
> Ilya Yanok (2):
> OMAPDSS: add FocalTech ETM070003DH6 display support
> OMAPDSS: add OrtusTech COM43H4M10XTC display support
>
> Mythri P K (2):
> OMAPDSS: HDMI: Move duplicate code from boardfile
> OMAPDSS: HDMI: Disable DDC internal pull up
>
> Ricardo Neri (4):
> ASoC: OMAP: HDMI: Introduce driver data for audio codec
> ASoC: OMAP: HDMI: Correct signature of ASoC functions
> OMAPDSS: HDMI: Create function to enable HDMI audio
> ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
>
> Rob Clark (2):
> OMAPDSS: fix potential NULL pointer ref in OCP_ERR handling path
> OMAPDSS: APPLY: fix NULL pointer deref when mgr is not set
>
> Tomi Valkeinen (90):
> OMAPDSS: DSI: flush posted write when entering ULPS
> OMAPDSS: DSI: flush posted write in send_bta
> OMAPDSS: DISPC: Flush posted writes when enabling outputs
> OMAPDSS: DSI: count with number of lanes
> OMAPDSS: DSI: Parse lane config
> OMAPDSS: DSI: Use new lane config in dsi_set_lane_config
> OMAPDSS: DSI: use lane config in dsi_get_lane_mask
> OMAPDSS: DSI: use lane config in dsi_cio_wait_tx_clk_esc_reset
> OMAPDSS: DSI: use lane config in dsi_cio_enable_lane_override
> OMAPDSS: DSI: remove dsi_get_num_lanes_used
> OMAPDSS: DSI: fix lane handling when entering ULPS
> OMAPDSS: DSI: improve wait_for_bit_change
> OMAPDSS: DSI: disable DDR_CLK_ALWAYS_ON when entering ULPS
> OMAPDSS: DISPC: add missing prototype
> OMAPDSS: Remove old fifomerge hacks
> OMAPDSS: remove L4_EXAMPLE code
> OMAPDSS: DISPC: make dispc_ovl_set_channel_out() public
> OMAPDSS: DISPC: make dispc_ovl_set_fifo_threshold() public
> OMAPDSS: remove partial update from the overlay manager
> OMAPDSS: remove partial update from DSI
> OMAPDSS: remove partial update from panel-taal
> OMAPDSS: pass ovl manager to dss_start_update
> OMAPDSS: DISPC: handle 0 out_width/out_height in ovl_setup()
> OMAPDSS: handle ilace/replication when configuring overlay
> OMAPDSS: separate FIFO threshold setup from ovl_setup
> OMAPDSS: separate overlay channel from ovl_setup
> OMAPDSS: setup manager with dispc_mgr_setup()
> OMAPDSS: DISPC: remove unused functions
> OMAPDSS: remove unneeded dss_ovl_wait_for_go()
> OMAPDSS: add ovl/mgr_manual_update() helpers
> OMAPDSS: split omap_dss_mgr_apply() to smaller funcs
> OMAPDSS: apply affects only one overlay manager
> OMAPDSS: create apply.c
> OMAPDSS: hide manager's enable/disable()
> OMAPDSS: APPLY: track whether a manager is enabled
> OMAPDSS: APPLY: skip isr register and config for manual update displays
> OMAPDSS: APPLY: skip isr register and config for disabled displays
> OMAPDSS: APPLY: cleanup dss_mgr_start_update
> OMAPDSS: store overlays in an array
> OMAPDSS: store managers in an array
> OMAPDSS: store overlays in a list for each manager
> OMAPDSS: APPLY: separate vsync isr register/unregister
> OMAPDSS: DISPC: Add dispc_mgr_get_vsync_irq()
> OMAPDSS: APPLY: use dispc_mgr_get_vsync_irq()
> OMAPDSS: APPLY: configure_* funcs take ovl/manager as args
> OMAPDSS: APPLY: rename overlay_cache_data
> OMAPDSS: APPLY: rename manager_cache_data
> OMAPDSS: APPLY: move spinlock outside the struct
> OMAPDSS: APPLY: rename dss_cache to dss_data
> OMAPDSS: APPLY: move ovl funcs to apply.c
> OMAPDSS: APPLY: move mgr funcs to apply.c
> OMAPDSS: remove ovl/mgr check-code temporarily
> OMAPDSS: APPLY: add mutex
> OMAPDSS: APPLY: add missing uses of spinlock
> OMAPDSS: DSI: call mgr_enable/disable for cmd mode displays
> OMAPDSS: APPLY: move mgr->enabled to mgr_priv_data
> OMAPDSS: APPLY: add busy field to mgr_priv_data
> OMAPDSS: APPLY: rewrite overlay enable/disable
> OMAPDSS: APPLY: rewrite register writing
> OMAPDSS: DISPC: add dispc_mgr_get_framedone_irq
> OMAPDSS: APPLY: add updating flag
> OMAPDSS: APPLY: clean up isr_handler
> OMAPDSS: APPLY: move mgr->info to apply.c
> OMAPDSS: APPLY: move ovl->info to apply.c
> OMAPDSS: APPLY: move channel-field to extra_info set
> OMAPDSS: APPLY: move fifo thresholds to extra_info set
> OMAPDSS: APPLY: rename dirty & shadow_dirty
> OMAPDSS: APPLY: remove device_changed field
> OMAPDSS: APPLY: add dss_apply_ovl_enable()
> OMAPDSS: APPLY: skip enable/disable if already enabled/disabled
> OMAPDSS: APPLY: add wait_pending_extra_info_updates()
> OMAPDSS: APPLY: remove runtime_get
> OMAPDSS: Add comments about blocking of ovl/mgr functions
> OMAPDSS: APPLY: add dss_ovl_simple_check()
> OMAPDSS: APPLY: add dss_mgr_simple_check()
> OMAPDSS: APPLY: add checking of ovls/mgrs settings
> OMAPDSS: APPLY: add return value to dss_mgr_enable()
> OMAPDSS: check the return value of dss_mgr_enable()
> OMAPDSS: APPLY: fix extra_info_update_ongoing
> OMAPDSS: APPLY: fix need_isr
> OMAPDSS: APPLY: clear shadow dirty flags only if GO had been set
> OMAPDSS: APPLY: add dss_set_go_bits()
> OMAPDSS: APPLY: cleanup extra_info_update_ongoing
> OMAPDSS: APPLY: add op->enabling
> OMAPDSS: APPLY: simplify dss_mgr_enable
> OMAPDSS: APPLY: add dss_setup_fifos
> OMAPDSS: APPLY: write fifo thresholds only if changed
> OMAPDSS: APPLY: remove unused variables
> OMAPDSS: APPLY: move check functions
> OMAPDSS: APPLY: move simple_check functions
>
> arch/arm/mach-omap2/board-4430sdp.c | 23 +-
> arch/arm/mach-omap2/board-omap4panda.c | 25 +-
> arch/arm/mach-omap2/display.c | 39 +
> drivers/media/video/omap/omap_vout.c | 33 +-
> drivers/video/omap/lcd_ams_delta.c | 15 +-
> drivers/video/omap/lcd_h3.c | 16 +-
> drivers/video/omap/lcd_htcherald.c | 16 +-
> drivers/video/omap/lcd_inn1510.c | 16 +-
> drivers/video/omap/lcd_inn1610.c | 16 +-
> drivers/video/omap/lcd_osk.c | 16 +-
> drivers/video/omap/lcd_palmte.c | 16 +-
> drivers/video/omap/lcd_palmtt.c | 15 +-
> drivers/video/omap/lcd_palmz71.c | 15 +-
> drivers/video/omap2/displays/Kconfig | 2 +-
> drivers/video/omap2/displays/panel-generic-dpi.c | 66 +
> .../omap2/displays/panel-nec-nl8048hl11-01b.c | 61 +-
> drivers/video/omap2/displays/panel-taal.c | 38 +-
> drivers/video/omap2/dss/Makefile | 3 +-
> drivers/video/omap2/dss/apply.c | 1324 ++++++++++++++++++++
> drivers/video/omap2/dss/core.c | 2 +
> drivers/video/omap2/dss/dispc.c | 407 +++----
> drivers/video/omap2/dss/dispc.h | 11 +
> drivers/video/omap2/dss/dispc_coefs.c | 326 +++++
> drivers/video/omap2/dss/dpi.c | 7 +-
> drivers/video/omap2/dss/dsi.c | 612 +++++-----
> drivers/video/omap2/dss/dss.h | 74 +-
> drivers/video/omap2/dss/dss_features.c | 11 +
> drivers/video/omap2/dss/dss_features.h | 1 +
> drivers/video/omap2/dss/hdmi.c | 59 +-
> drivers/video/omap2/dss/manager.c | 1221 ++----------------
> drivers/video/omap2/dss/overlay.c | 435 +++-----
> drivers/video/omap2/dss/rfbi.c | 1 -
> drivers/video/omap2/dss/sdi.c | 8 +-
> drivers/video/omap2/dss/ti_hdmi.h | 10 +-
> drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 37 +-
> drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 3 -
> drivers/video/omap2/dss/venc.c | 28 +-
> drivers/video/omap2/omapfb/omapfb-ioctl.c | 42 +-
> drivers/video/omap2/omapfb/omapfb-main.c | 14 +-
> drivers/video/omap2/omapfb/omapfb-sysfs.c | 4 +-
> drivers/video/omap2/omapfb/omapfb.h | 11 +-
> include/video/omapdss.h | 58 +-
> 42 files changed, 2883 insertions(+), 2254 deletions(-)
> create mode 100644 drivers/video/omap2/dss/apply.c
> create mode 100644 drivers/video/omap2/dss/dispc_coefs.c
>
prev parent reply other threads:[~2012-01-09 2:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-05 8:56 [GIT PULL] OMAP DSS for v3.3 Tomi Valkeinen
2012-01-09 2:40 ` Florian Tobias Schandinat [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F0A53BA.1070605@gmx.de \
--to=florianschandinat@gmx.de \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).