From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
To: linux-fbdev@vger.kernel.org
Subject: Re: [PATCH] video: exynos_dp: use usleep_range instead of delay
Date: Thu, 26 Jul 2012 17:22:03 +0000 [thread overview]
Message-ID: <50117CBB.1080906@gmx.de> (raw)
In-Reply-To: <002201cd64ca$d5bbabb0$81330310$%han@samsung.com>
On 07/18/2012 09:50 AM, Jingoo Han wrote:
> This patch replaces udelay and mdelay with usleep_range to remove
> the busy loop waiting.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> drivers/video/exynos/exynos_dp_core.c | 14 +++++++-------
> drivers/video/exynos/exynos_dp_reg.c | 4 ++--
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
> index 9db7b9f..25907f4 100644
> --- a/drivers/video/exynos/exynos_dp_core.c
> +++ b/drivers/video/exynos/exynos_dp_core.c
> @@ -47,7 +47,7 @@ static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
>
> exynos_dp_init_hpd(dp);
>
> - udelay(200);
> + usleep_range(200, 210);
>
> while (exynos_dp_get_plug_in_status(dp) != 0) {
> timeout_loop++;
> @@ -55,7 +55,7 @@ static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
> dev_err(dp->dev, "failed to get hpd plug status\n");
> return -ETIMEDOUT;
> }
> - udelay(10);
> + usleep_range(10, 11);
> }
>
> return 0;
> @@ -486,7 +486,7 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
> u8 pre_emphasis;
> u8 training_lane;
>
> - udelay(100);
> + usleep_range(100, 101);
>
> exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
> 6, link_status);
> @@ -571,7 +571,7 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
>
> u8 adjust_request[2];
>
> - udelay(400);
> + usleep_range(400, 401);
>
> exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
> 6, link_status);
> @@ -739,7 +739,7 @@ static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
> if (retval = 0)
> break;
>
> - udelay(100);
> + usleep_range(100, 110);
> }
>
> return retval;
> @@ -773,7 +773,7 @@ static int exynos_dp_config_video(struct exynos_dp_device *dp,
> return -ETIMEDOUT;
> }
>
> - udelay(1);
> + usleep_range(1, 2);
> }
>
> /* Set to use the register calculated M/N video */
> @@ -807,7 +807,7 @@ static int exynos_dp_config_video(struct exynos_dp_device *dp,
> return -ETIMEDOUT;
> }
>
> - mdelay(1);
> + usleep_range(1000, 1001);
> }
>
> if (retval != 0)
> diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c
> index 6ce76d5..ce401c8 100644
> --- a/drivers/video/exynos/exynos_dp_reg.c
> +++ b/drivers/video/exynos/exynos_dp_reg.c
> @@ -122,7 +122,7 @@ void exynos_dp_reset(struct exynos_dp_device *dp)
> LS_CLK_DOMAIN_FUNC_EN_N;
> writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
>
> - udelay(20);
> + usleep_range(20, 30);
>
> exynos_dp_lane_swap(dp, 0);
>
> @@ -988,7 +988,7 @@ void exynos_dp_reset_macro(struct exynos_dp_device *dp)
> writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
>
> /* 10 us is the minimum reset time. */
> - udelay(10);
> + usleep_range(10, 20);
>
> reg &= ~MACRO_RST;
> writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
prev parent reply other threads:[~2012-07-26 17:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-18 9:50 [PATCH] video: exynos_dp: use usleep_range instead of delay Jingoo Han
2012-07-26 17:22 ` Florian Tobias Schandinat [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50117CBB.1080906@gmx.de \
--to=florianschandinat@gmx.de \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).