linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
To: linux-fbdev@vger.kernel.org
Subject: Re: [PATCH v2] da8xx-fb: add pm_runtime support
Date: Wed, 10 Oct 2012 12:32:47 +0000	[thread overview]
Message-ID: <50756AEF.60108@gmx.de> (raw)

On 09/21/2012 03:50 PM, Manjunathappa, Prakash wrote:
> Add pm_runtime support to the da8xx-fb frame buffer driver.
> 
> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>

Applied.


Thanks,

Florian Tobias Schandinat


> ---
> Applies on top of patch "da8xx-fb: enable LCDC if FB is unblanked" under review.
> Since v1:
> Use pm_runtime_put_sync in PM suspend callback.
> 
>  drivers/video/da8xx-fb.c |   27 +++++++++++++--------------
>  1 files changed, 13 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> index af2aa38..4280d23 100644
> --- a/drivers/video/da8xx-fb.c
> +++ b/drivers/video/da8xx-fb.c
> @@ -26,6 +26,7 @@
>  #include <linux/device.h>
>  #include <linux/platform_device.h>
>  #include <linux/uaccess.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/interrupt.h>
>  #include <linux/wait.h>
>  #include <linux/clk.h>
> @@ -1037,8 +1038,8 @@ static int __devexit fb_remove(struct platform_device *dev)
>  		dma_free_coherent(NULL, par->vram_size, par->vram_virt,
>  				  par->vram_phys);
>  		free_irq(par->irq, par);
> -		clk_disable(par->lcdc_clk);
> -		clk_put(par->lcdc_clk);
> +		pm_runtime_put_sync(&dev->dev);
> +		pm_runtime_disable(&dev->dev);
>  		framebuffer_release(info);
>  		iounmap((void __iomem *)da8xx_fb_reg_base);
>  		release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
> @@ -1272,9 +1273,9 @@ static int __devinit fb_probe(struct platform_device *device)
>  		ret = -ENODEV;
>  		goto err_ioremap;
>  	}
> -	ret = clk_enable(fb_clk);
> -	if (ret)
> -		goto err_clk_put;
> +
> +	pm_runtime_enable(&device->dev);
> +	pm_runtime_get_sync(&device->dev);
>  
>  	/* Determine LCD IP Version */
>  	switch (lcdc_read(LCD_PID_REG)) {
> @@ -1302,7 +1303,7 @@ static int __devinit fb_probe(struct platform_device *device)
>  	if (i = ARRAY_SIZE(known_lcd_panels)) {
>  		dev_err(&device->dev, "GLCD: No valid panel found\n");
>  		ret = -ENODEV;
> -		goto err_clk_disable;
> +		goto err_pm_runtime_disable;
>  	} else
>  		dev_info(&device->dev, "GLCD: Found %s panel\n",
>  					fb_pdata->type);
> @@ -1314,7 +1315,7 @@ static int __devinit fb_probe(struct platform_device *device)
>  	if (!da8xx_fb_info) {
>  		dev_dbg(&device->dev, "Memory allocation failed for fb_info\n");
>  		ret = -ENOMEM;
> -		goto err_clk_disable;
> +		goto err_pm_runtime_disable;
>  	}
>  
>  	par = da8xx_fb_info->par;
> @@ -1476,11 +1477,9 @@ err_release_fb_mem:
>  err_release_fb:
>  	framebuffer_release(da8xx_fb_info);
>  
> -err_clk_disable:
> -	clk_disable(fb_clk);
> -
> -err_clk_put:
> -	clk_put(fb_clk);
> +err_pm_runtime_disable:
> +	pm_runtime_put_sync(&device->dev);
> +	pm_runtime_disable(&device->dev);
>  
>  err_ioremap:
>  	iounmap((void __iomem *)da8xx_fb_reg_base);
> @@ -1503,7 +1502,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state)
>  
>  	fb_set_suspend(info, 1);
>  	lcd_disable_raster(true);
> -	clk_disable(par->lcdc_clk);
> +	pm_runtime_put_sync(&dev->dev);
>  	console_unlock();
>  
>  	return 0;
> @@ -1514,7 +1513,7 @@ static int fb_resume(struct platform_device *dev)
>  	struct da8xx_fb_par *par = info->par;
>  
>  	console_lock();
> -	clk_enable(par->lcdc_clk);
> +	pm_runtime_get_sync(&dev->dev);
>  	if (par->blank = FB_BLANK_UNBLANK) {
>  		lcd_enable_raster();
>  


             reply	other threads:[~2012-10-10 12:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-10 12:32 Florian Tobias Schandinat [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-09-21 15:51 [PATCH v2] da8xx-fb: add pm_runtime support Manjunathappa, Prakash

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50756AEF.60108@gmx.de \
    --to=florianschandinat@gmx.de \
    --cc=linux-fbdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).