* Re: [PATCH] da8xx-fb: save and restore LCDC context across suspend/resume cycle
@ 2012-10-10 12:33 Florian Tobias Schandinat
0 siblings, 0 replies; 2+ messages in thread
From: Florian Tobias Schandinat @ 2012-10-10 12:33 UTC (permalink / raw)
To: linux-fbdev
On 09/25/2012 02:11 PM, Manjunathappa, Prakash wrote:
> Save and restore register context of LCDC respectively
> before suspend and after resume.
>
> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> Applies on top of below patch under review:
> "da8xx-fb: add pm_runtime support"
> drivers/video/da8xx-fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 65 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> index 4280d23..65a11ef 100644
> --- a/drivers/video/da8xx-fb.c
> +++ b/drivers/video/da8xx-fb.c
> @@ -1491,6 +1491,69 @@ err_request_mem:
> }
>
> #ifdef CONFIG_PM
> +struct lcdc_context {
> + u32 clk_enable;
> + u32 ctrl;
> + u32 dma_ctrl;
> + u32 raster_timing_0;
> + u32 raster_timing_1;
> + u32 raster_timing_2;
> + u32 int_enable_set;
> + u32 dma_frm_buf_base_addr_0;
> + u32 dma_frm_buf_ceiling_addr_0;
> + u32 dma_frm_buf_base_addr_1;
> + u32 dma_frm_buf_ceiling_addr_1;
> + u32 raster_ctrl;
> +} reg_context;
> +
> +static void lcd_context_save(void)
> +{
> + if (lcd_revision = LCD_VERSION_2) {
> + reg_context.clk_enable = lcdc_read(LCD_CLK_ENABLE_REG);
> + reg_context.int_enable_set = lcdc_read(LCD_INT_ENABLE_SET_REG);
> + }
> +
> + reg_context.ctrl = lcdc_read(LCD_CTRL_REG);
> + reg_context.dma_ctrl = lcdc_read(LCD_DMA_CTRL_REG);
> + reg_context.raster_timing_0 = lcdc_read(LCD_RASTER_TIMING_0_REG);
> + reg_context.raster_timing_1 = lcdc_read(LCD_RASTER_TIMING_1_REG);
> + reg_context.raster_timing_2 = lcdc_read(LCD_RASTER_TIMING_2_REG);
> + reg_context.dma_frm_buf_base_addr_0 > + lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
> + reg_context.dma_frm_buf_ceiling_addr_0 > + lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
> + reg_context.dma_frm_buf_base_addr_1 > + lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
> + reg_context.dma_frm_buf_ceiling_addr_1 > + lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
> + reg_context.raster_ctrl = lcdc_read(LCD_RASTER_CTRL_REG);
> + return;
> +}
> +
> +static void lcd_context_restore(void)
> +{
> + if (lcd_revision = LCD_VERSION_2) {
> + lcdc_write(reg_context.clk_enable, LCD_CLK_ENABLE_REG);
> + lcdc_write(reg_context.int_enable_set, LCD_INT_ENABLE_SET_REG);
> + }
> +
> + lcdc_write(reg_context.ctrl, LCD_CTRL_REG);
> + lcdc_write(reg_context.dma_ctrl, LCD_DMA_CTRL_REG);
> + lcdc_write(reg_context.raster_timing_0, LCD_RASTER_TIMING_0_REG);
> + lcdc_write(reg_context.raster_timing_1, LCD_RASTER_TIMING_1_REG);
> + lcdc_write(reg_context.raster_timing_2, LCD_RASTER_TIMING_2_REG);
> + lcdc_write(reg_context.dma_frm_buf_base_addr_0,
> + LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
> + lcdc_write(reg_context.dma_frm_buf_ceiling_addr_0,
> + LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
> + lcdc_write(reg_context.dma_frm_buf_base_addr_1,
> + LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
> + lcdc_write(reg_context.dma_frm_buf_ceiling_addr_1,
> + LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
> + lcdc_write(reg_context.raster_ctrl, LCD_RASTER_CTRL_REG);
> + return;
> +}
> +
> static int fb_suspend(struct platform_device *dev, pm_message_t state)
> {
> struct fb_info *info = platform_get_drvdata(dev);
> @@ -1502,6 +1565,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state)
>
> fb_set_suspend(info, 1);
> lcd_disable_raster(true);
> + lcd_context_save();
> pm_runtime_put_sync(&dev->dev);
> console_unlock();
>
> @@ -1514,6 +1578,7 @@ static int fb_resume(struct platform_device *dev)
>
> console_lock();
> pm_runtime_get_sync(&dev->dev);
> + lcd_context_restore();
> if (par->blank = FB_BLANK_UNBLANK) {
> lcd_enable_raster();
>
^ permalink raw reply [flat|nested] 2+ messages in thread* [PATCH] da8xx-fb: save and restore LCDC context across suspend/resume cycle
@ 2012-09-25 14:23 Manjunathappa, Prakash
0 siblings, 0 replies; 2+ messages in thread
From: Manjunathappa, Prakash @ 2012-09-25 14:23 UTC (permalink / raw)
To: linux-fbdev
Save and restore register context of LCDC respectively
before suspend and after resume.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
---
Applies on top of below patch under review:
"da8xx-fb: add pm_runtime support"
drivers/video/da8xx-fb.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 65 insertions(+), 0 deletions(-)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 4280d23..65a11ef 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1491,6 +1491,69 @@ err_request_mem:
}
#ifdef CONFIG_PM
+struct lcdc_context {
+ u32 clk_enable;
+ u32 ctrl;
+ u32 dma_ctrl;
+ u32 raster_timing_0;
+ u32 raster_timing_1;
+ u32 raster_timing_2;
+ u32 int_enable_set;
+ u32 dma_frm_buf_base_addr_0;
+ u32 dma_frm_buf_ceiling_addr_0;
+ u32 dma_frm_buf_base_addr_1;
+ u32 dma_frm_buf_ceiling_addr_1;
+ u32 raster_ctrl;
+} reg_context;
+
+static void lcd_context_save(void)
+{
+ if (lcd_revision = LCD_VERSION_2) {
+ reg_context.clk_enable = lcdc_read(LCD_CLK_ENABLE_REG);
+ reg_context.int_enable_set = lcdc_read(LCD_INT_ENABLE_SET_REG);
+ }
+
+ reg_context.ctrl = lcdc_read(LCD_CTRL_REG);
+ reg_context.dma_ctrl = lcdc_read(LCD_DMA_CTRL_REG);
+ reg_context.raster_timing_0 = lcdc_read(LCD_RASTER_TIMING_0_REG);
+ reg_context.raster_timing_1 = lcdc_read(LCD_RASTER_TIMING_1_REG);
+ reg_context.raster_timing_2 = lcdc_read(LCD_RASTER_TIMING_2_REG);
+ reg_context.dma_frm_buf_base_addr_0 + lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+ reg_context.dma_frm_buf_ceiling_addr_0 + lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+ reg_context.dma_frm_buf_base_addr_1 + lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+ reg_context.dma_frm_buf_ceiling_addr_1 + lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ reg_context.raster_ctrl = lcdc_read(LCD_RASTER_CTRL_REG);
+ return;
+}
+
+static void lcd_context_restore(void)
+{
+ if (lcd_revision = LCD_VERSION_2) {
+ lcdc_write(reg_context.clk_enable, LCD_CLK_ENABLE_REG);
+ lcdc_write(reg_context.int_enable_set, LCD_INT_ENABLE_SET_REG);
+ }
+
+ lcdc_write(reg_context.ctrl, LCD_CTRL_REG);
+ lcdc_write(reg_context.dma_ctrl, LCD_DMA_CTRL_REG);
+ lcdc_write(reg_context.raster_timing_0, LCD_RASTER_TIMING_0_REG);
+ lcdc_write(reg_context.raster_timing_1, LCD_RASTER_TIMING_1_REG);
+ lcdc_write(reg_context.raster_timing_2, LCD_RASTER_TIMING_2_REG);
+ lcdc_write(reg_context.dma_frm_buf_base_addr_0,
+ LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
+ lcdc_write(reg_context.dma_frm_buf_ceiling_addr_0,
+ LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
+ lcdc_write(reg_context.dma_frm_buf_base_addr_1,
+ LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
+ lcdc_write(reg_context.dma_frm_buf_ceiling_addr_1,
+ LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
+ lcdc_write(reg_context.raster_ctrl, LCD_RASTER_CTRL_REG);
+ return;
+}
+
static int fb_suspend(struct platform_device *dev, pm_message_t state)
{
struct fb_info *info = platform_get_drvdata(dev);
@@ -1502,6 +1565,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state)
fb_set_suspend(info, 1);
lcd_disable_raster(true);
+ lcd_context_save();
pm_runtime_put_sync(&dev->dev);
console_unlock();
@@ -1514,6 +1578,7 @@ static int fb_resume(struct platform_device *dev)
console_lock();
pm_runtime_get_sync(&dev->dev);
+ lcd_context_restore();
if (par->blank = FB_BLANK_UNBLANK) {
lcd_enable_raster();
--
1.7.0.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-10-10 12:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-10 12:33 [PATCH] da8xx-fb: save and restore LCDC context across suspend/resume cycle Florian Tobias Schandinat
-- strict thread matches above, loose matches on Subject: below --
2012-09-25 14:23 Manjunathappa, Prakash
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).