From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller
Date: Thu, 11 Oct 2012 01:06:56 +0000 [thread overview]
Message-ID: <50761BB0.3080507@gmx.de> (raw)
In-Reply-To: <50618242.2070302@free-electrons.com>
Hi Maxime,
On 09/25/2012 10:06 AM, Maxime Ripard wrote:
> Hello Florian,
>
> Le 21/09/2012 16:04, Maxime Ripard a écrit :
>> Le 20/09/2012 18:33, Maxime Ripard a écrit :
>>> This patch adds support for the Solomon SSD1307 OLED
>>> controller found on the Crystalfontz CFA10036 board.
>>>
>>> This controller can drive a display with a resolution up
>>> to 128x39 and can operate over I2C or SPI.
>>>
>>> The current driver has only been tested on the CFA-10036,
>>> that is using this controller over I2C to driver a 96x16
>>> OLED screen.
>>>
>>> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>> Cc: Brian Lilly <brian@crystalfontz.com>
>>
>> Would you consider merging this patch or review it?
>> It has been around for quite some time now and has not received any
>> comments for at least the 2 last versions, so I guess there is not much
>> left holding it back (unless, of course, if you have some comments to
>> address), and I really would like to have it in 3.7.
>
> I guess we missed the 3.7 merge here. That's no big deal, but I sent the
> patch series on a regular basis, starting 07/17 (sent new versions on
> 07/31, 08/23, 09/05 and 09/20), addressed all the issues that were
> raised, and never got any feedback from you, either positive or
> negative. The patches affecting the MX28 device trees have already been
> merged by Shawn Guo into its tree, so only the driver and the bindings
> remain to be merged. So I'm kind of lost on what should I do here?
>
> Is it because I have an obviously broken driver or you don't have enough
> time, or you don't want to merge drivers for such type of low resolution
> controllers, or any other reason?
I don't see any reason to not support low resolutions, might be a nice
status monitor for embedded devices.
It's not your fault. It's just that for the past two months writing my
thesis reduced my free time (and hence the time that I could potentially
use for reviewing patches) to approximately zero. While I managed to get
some smaller patches done, there really wasn't any time to process the
3-4 completely new things pending and some scarier patches which touch
the core infrastructure.
I think that it should be better soon, at least my thesis is now done,
but I also have to fix up the rest of my life that was neglected while
writing, including my paid jobs.
Best regards,
Florian Tobias Schandinat
next prev parent reply other threads:[~2012-10-11 1:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-20 16:33 [PATCHv5 0/2] Add support for the OLED in the CFA10036 Maxime Ripard
2012-09-20 16:33 ` [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard
2012-09-21 14:04 ` Maxime Ripard
2012-09-25 10:06 ` Maxime Ripard
2012-10-11 1:06 ` Florian Tobias Schandinat [this message]
2012-10-18 15:11 ` Maxime Ripard
2012-09-20 16:33 ` [PATCH 2/2] ARM: dts: mxs: add oled support for the cfa-10036 Maxime Ripard
-- strict thread matches above, loose matches on Subject: below --
2012-10-31 9:12 [PATCHv6 0/2] Add support for the OLED in the CFA10036 Maxime Ripard
2012-10-31 9:12 ` [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard
2012-09-05 9:35 [PATCHv4] Add support for the OLED in the CFA10036 Maxime Ripard
2012-09-05 9:35 ` [PATCH 1/2] video: Add support for the Solomon SSD1307 OLED Controller Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50761BB0.3080507@gmx.de \
--to=florianschandinat@gmx.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).