From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-fbdev <linux-fbdev@vger.kernel.org>,
linux-omap <linux-omap@vger.kernel.org>
Subject: [GIT PULL] omapdss changes for 3.11, part 2/2
Date: Mon, 17 Jun 2013 13:47:53 +0000 [thread overview]
Message-ID: <51BF1389.4060901@ti.com> (raw)
In-Reply-To: <51BF1326.7010206@ti.com>
[-- Attachment #1: Type: text/plain, Size: 6017 bytes --]
The following changes since commit 595470a7853848cb971d5ee3fed443b1e3aa0d1b:
OMAPDSS: gracefully disable overlay at error (2013-06-17 14:00:56 +0300)
are available in the git repository at:
git://gitorious.org/linux-omap-dss2/linux.git tags/omapdss-for-3.11-2
for you to fetch changes up to c545b59515cca4ccaf920e12582a43836cddaa2b:
OMAPDSS: panels: add Kconfig comment (2013-06-17 14:33:21 +0300)
----------------------------------------------------------------
OMAP display subsystem changes for 3.11 (part 2/2)
This is the second part of OMAP DSS changes for 3.11. This part contains the
new DSS device model support.
The current OMAP panel drivers use a custom DSS bus, and there's a hard limit
of one external display block per video pipeline. In the new DSS device model
the devices/drivers are made according to the control bus of the display block,
usually platform, i2c or spi. The display blocks can also be chained so that we
can have separate drivers for setups with both external encoder and panel.
To allow the current board files, which use the old style panels, to function,
the old display drivers are left in their current state, and new ones are added
to drivers/video/omap2/displays-new/. When the board files have been converted
to use the new style panels, we can remove the old code. This is planned to
happen in v3.12.
Having to support two very different DSS device models makes the driver
somewhat confusing in some parts, and prevents us from properly cleaning up
some other parts. These cleanups will be done when the old code is removed.
The new device model is designed with CDF (Common Display Framework) in mind.
While CDF is still under work, the new DSS device model should be much more
similar to CDF's model than the old device model, which should make the
eventual conversion to CDF much easier.
----------------------------------------------------------------
Tomi Valkeinen (23):
OMAPDSS: public omapdss_register_output()
OMAPDSS: modify get/find functions to go through the device chain
OMAPDSS: add OMAP_DISPLAY_TYPE_DVI
drm/omap: DVI connector fix
OMAPDSS: DPI: Add ops
OMAPDSS: SDI: Add ops
OMAPDSS: DVI: Add ops
OMAPDSS: AnalogTV: Add ops
OMAPDSS: HDMI: Add ops
OMAPDSS: DSI: Add ops
OMAPDSS: Add new TFP410 Encoder driver
OMAPDSS: Add new TPD12S015 Encoder driver
OMAPDSS: Add new DVI Connector driver
OMAPDSS: Add new HDMI Connector driver
OMAPDSS: Add new Analog TV Connector driver
OMAPDSS: Add new simple DPI panel driver
OMAPDSS: Add new DSI Command Mode panel driver
OMAPDSS: Add Sony ACX565AKM panel driver
OMAPDSS: Add LG.Philips LB035Q02 panel driver
OMAPDSS: Add Sharp LS037V7DW01 panel driver
OMAPDSS: Add TPO TD043MTEA1 panel driver
OMAPDSS: Add NEC NL8048HL11 panel driver
OMAPDSS: panels: add Kconfig comment
drivers/gpu/drm/omapdrm/omap_drv.c | 6 +-
drivers/video/omap2/Kconfig | 1 +
drivers/video/omap2/Makefile | 1 +
drivers/video/omap2/displays-new/Kconfig | 73 ++
drivers/video/omap2/displays-new/Makefile | 12 +
.../video/omap2/displays-new/connector-analog-tv.c | 265 ++++
drivers/video/omap2/displays-new/connector-dvi.c | 351 +++++
drivers/video/omap2/displays-new/connector-hdmi.c | 375 ++++++
drivers/video/omap2/displays-new/encoder-tfp410.c | 267 ++++
.../video/omap2/displays-new/encoder-tpd12s015.c | 395 ++++++
drivers/video/omap2/displays-new/panel-dpi.c | 270 ++++
drivers/video/omap2/displays-new/panel-dsi-cm.c | 1336 ++++++++++++++++++++
.../omap2/displays-new/panel-lgphilips-lb035q02.c | 358 ++++++
.../omap2/displays-new/panel-nec-nl8048hl11.c | 394 ++++++
.../omap2/displays-new/panel-sharp-ls037v7dw01.c | 324 +++++
.../omap2/displays-new/panel-sony-acx565akm.c | 865 +++++++++++++
.../omap2/displays-new/panel-tpo-td043mtea1.c | 646 ++++++++++
drivers/video/omap2/displays/Kconfig | 2 +-
drivers/video/omap2/dss/apply.c | 14 +-
drivers/video/omap2/dss/display.c | 1 +
drivers/video/omap2/dss/dpi.c | 74 +-
drivers/video/omap2/dss/dsi.c | 97 +-
drivers/video/omap2/dss/dss.h | 4 -
drivers/video/omap2/dss/hdmi.c | 238 +++-
drivers/video/omap2/dss/output.c | 15 +-
drivers/video/omap2/dss/rfbi.c | 4 +-
drivers/video/omap2/dss/sdi.c | 82 +-
drivers/video/omap2/dss/venc.c | 76 +-
include/video/omap-panel-data.h | 209 +++
include/video/omapdss.h | 192 ++-
30 files changed, 6911 insertions(+), 36 deletions(-)
create mode 100644 drivers/video/omap2/displays-new/Kconfig
create mode 100644 drivers/video/omap2/displays-new/Makefile
create mode 100644 drivers/video/omap2/displays-new/connector-analog-tv.c
create mode 100644 drivers/video/omap2/displays-new/connector-dvi.c
create mode 100644 drivers/video/omap2/displays-new/connector-hdmi.c
create mode 100644 drivers/video/omap2/displays-new/encoder-tfp410.c
create mode 100644 drivers/video/omap2/displays-new/encoder-tpd12s015.c
create mode 100644 drivers/video/omap2/displays-new/panel-dpi.c
create mode 100644 drivers/video/omap2/displays-new/panel-dsi-cm.c
create mode 100644 drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
create mode 100644 drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
create mode 100644 drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
create mode 100644 drivers/video/omap2/displays-new/panel-sony-acx565akm.c
create mode 100644 drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
prev parent reply other threads:[~2013-06-17 13:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-17 13:46 [GIT PULL] omapdss changes for 3.11, part 1/2 Tomi Valkeinen
2013-06-17 13:47 ` Tomi Valkeinen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51BF1389.4060901@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).