Re: [RFC 0/1] Adding DT support to video/da8xx-fb.c

[Tomi Valkeinen <tomi.valkeinen@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1144 bytes --]

Hi,

On 08/08/13 23:15, Darren Etheridge wrote:
> This is part of a larger series of patches to upgrade the da8xx-fb.c driver
> to support the Texas Instruments AM335x device.  As part of this upgrade
> we also want to add devicetree support for both the original da8xx and the
> am335x.  Tomi Valkeinen has reviewed the fbdev changes but he suggested
> that it was prudent to extract the dt pieces and run it through the
> devicetree mailing list for review.
> 
> Thanks,
> Darren
> 
> Darren Etheridge (1):
>   video: da8xx-fb: adding dt support
> 
>  .../devicetree/bindings/video/fb-da8xx.txt         |   37 +++++++++++
>  drivers/video/da8xx-fb.c                           |   67 +++++++++++++++++++-
>  2 files changed, 101 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/fb-da8xx.txt

I just realized something. We have both drm and fb drivers for the LCDC
IP. The hardware is the same, thus, there should only be one set of DT
bindings, used by both drivers.

I don't know why this didn't occur to me earlier, as it's the same
situation with OMAP DSS.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]