[PATCH 00/12] Prepare various SH/R Mobile/Car drivers for CCF migration

[PATCH 00/12] Prepare various SH/R Mobile/Car drivers for CCF migration

[Laurent Pinchart]

Hello,

This patch series, based on v3.12-rc7, prepares various Renesas SH-Mobile,
R-Mobile and R-Car drivers for migration to CCF by adding clock prepare and
unprepare support.

The patches are pretty straightforward. Most of the drivers called
clk_enable and clk_disable in sleepable context, I've thus just converted them
to clk_prepare_enable and clk_disable_unprepare.

The clocksource drivers were slightly more complex to handle as clk_enable and
clk_disable were called in non-sleepable context. As the clocksource framework
architecture doesn't provide any sleepable callback in which clocks could be
prepared and unprepared, I've added clk_prepare and clk_unprepare calls in the
probe and suspend/resume handlers (clocksources can't be removed so the remove
handler doesn't need a clk_unprepare call).

I'd like to get all these patches merged in v3.14. As they will need to go
through their respective subsystems' trees, I would appreciate if all
maintainers involved could notify me when they merge patches from this series
in their tree to help me tracking the merge status. I don't plan to send pull
requests individually for these patches, and I will repost patches
individually if changes are requested during review.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-ide@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org
Cc: Chris Ball <cjb@laptop.org>
Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Cc: linux-mmc@vger.kernel.org
Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org

Laurent Pinchart (12):
  clocksource: sh_cmt: Add clk_prepare/unprepare support
  clocksource: sh_mtu2: Add clk_prepare/unprepare support
  clocksource: sh_tmu: Add clk_prepare/unprepare support
  sata_rcar: Convert to clk_prepare/unprepare
  drm: shmob_drm: Convert to clk_prepare/unprepare
  i2c: sh_mobile: Convert to clk_prepare/unprepare
  mmc: sh_mmcif: Convert to clk_prepare/unprepare
  mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare
  usb: gadget: r8a66597-udc: Convert to clk_prepare/unprepare
  usb: r8a66597-hcd: Convert to clk_prepare/unprepare
  fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare
  fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare

 drivers/ata/sata_rcar.c                   | 10 +++++-----
 drivers/clocksource/sh_cmt.c              | 20 ++++++++++++++++----
 drivers/clocksource/sh_mtu2.c             | 16 ++++++++++++++--
 drivers/clocksource/sh_tmu.c              | 20 +++++++++++++++++---
 drivers/gpu/drm/shmobile/shmob_drm_crtc.c |  4 ++--
 drivers/i2c/busses/i2c-sh_mobile.c        |  8 ++++----
 drivers/mmc/host/sh_mmcif.c               | 12 ++++++------
 drivers/mmc/host/sh_mobile_sdhi.c         |  4 ++--
 drivers/usb/gadget/r8a66597-udc.c         |  6 +++---
 drivers/usb/host/r8a66597-hcd.c           |  4 ++--
 drivers/video/sh_mobile_hdmi.c            |  6 +++---
 drivers/video/sh_mobile_lcdcfb.c          |  4 ++--
 12 files changed, 76 insertions(+), 38 deletions(-)

-- 
Regards,

Laurent Pinchart

[PATCH 11/12] fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare

[Laurent Pinchart]

Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index bfe4728..190145e 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1326,7 +1326,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 		goto erate;
 	}
 
-	ret = clk_enable(hdmi->hdmi_clk);
+	ret = clk_prepare_enable(hdmi->hdmi_clk);
 	if (ret < 0) {
 		dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
 		goto erate;
@@ -1404,7 +1404,7 @@ emap_htop1:
 emap:
 	release_mem_region(res->start, resource_size(res));
 ereqreg:
-	clk_disable(hdmi->hdmi_clk);
+	clk_disable_unprepare(hdmi->hdmi_clk);
 erate:
 	clk_put(hdmi->hdmi_clk);
 egetclk:
@@ -1427,7 +1427,7 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
 	cancel_delayed_work_sync(&hdmi->edid_work);
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	clk_disable(hdmi->hdmi_clk);
+	clk_disable_unprepare(hdmi->hdmi_clk);
 	clk_put(hdmi->hdmi_clk);
 	if (hdmi->htop1)
 		iounmap(hdmi->htop1);
-- 
1.8.1.5

[PATCH 12/12] fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare

[Laurent Pinchart]

Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0264704..eaeae0f 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -344,7 +344,7 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
 {
 	if (atomic_inc_and_test(&priv->hw_usecnt)) {
 		if (priv->dot_clk)
-			clk_enable(priv->dot_clk);
+			clk_prepare_enable(priv->dot_clk);
 		pm_runtime_get_sync(priv->dev);
 		if (priv->meram_dev && priv->meram_dev->pdev)
 			pm_runtime_get_sync(&priv->meram_dev->pdev->dev);
@@ -358,7 +358,7 @@ static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
 			pm_runtime_put_sync(&priv->meram_dev->pdev->dev);
 		pm_runtime_put(priv->dev);
 		if (priv->dot_clk)
-			clk_disable(priv->dot_clk);
+			clk_disable_unprepare(priv->dot_clk);
 	}
 }
 
-- 
1.8.1.5

Re: [PATCH 12/12] fbdev: shmobile-lcdcfb: Convert to clk_prepare/unprepare

[Jean-Christophe PLAGNIOL-VILLARD]

On 23:49 Mon 28 Oct     , Laurent Pinchart wrote:
> Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
> clk_disable_unprepare() to get ready for the migration to the common
> clock framework.
> 
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>  drivers/video/sh_mobile_lcdcfb.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
> index 0264704..eaeae0f 100644
> --- a/drivers/video/sh_mobile_lcdcfb.c
> +++ b/drivers/video/sh_mobile_lcdcfb.c
> @@ -344,7 +344,7 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
>  {
>  	if (atomic_inc_and_test(&priv->hw_usecnt)) {
>  		if (priv->dot_clk)
> -			clk_enable(priv->dot_clk);
> +			clk_prepare_enable(priv->dot_clk);
>  		pm_runtime_get_sync(priv->dev);
>  		if (priv->meram_dev && priv->meram_dev->pdev)
>  			pm_runtime_get_sync(&priv->meram_dev->pdev->dev);
> @@ -358,7 +358,7 @@ static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
>  			pm_runtime_put_sync(&priv->meram_dev->pdev->dev);
>  		pm_runtime_put(priv->dev);
>  		if (priv->dot_clk)
> -			clk_disable(priv->dot_clk);
> +			clk_disable_unprepare(priv->dot_clk);
>  	}
>  }
>  
> -- 
> 1.8.1.5
> 

Re: [PATCH 11/12] fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare

[Jean-Christophe PLAGNIOL-VILLARD]

On 23:49 Mon 28 Oct     , Laurent Pinchart wrote:
> Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
> clk_disable_unprepare() to get ready for the migration to the common
> clock framework.
> 
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Bset Regards,
J.
> Cc: linux-fbdev@vger.kernel.org
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
>  drivers/video/sh_mobile_hdmi.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
> index bfe4728..190145e 100644
> --- a/drivers/video/sh_mobile_hdmi.c
> +++ b/drivers/video/sh_mobile_hdmi.c
> @@ -1326,7 +1326,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
>  		goto erate;
>  	}
>  
> -	ret = clk_enable(hdmi->hdmi_clk);
> +	ret = clk_prepare_enable(hdmi->hdmi_clk);
>  	if (ret < 0) {
>  		dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
>  		goto erate;
> @@ -1404,7 +1404,7 @@ emap_htop1:
>  emap:
>  	release_mem_region(res->start, resource_size(res));
>  ereqreg:
> -	clk_disable(hdmi->hdmi_clk);
> +	clk_disable_unprepare(hdmi->hdmi_clk);
>  erate:
>  	clk_put(hdmi->hdmi_clk);
>  egetclk:
> @@ -1427,7 +1427,7 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
>  	cancel_delayed_work_sync(&hdmi->edid_work);
>  	pm_runtime_put(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
> -	clk_disable(hdmi->hdmi_clk);
> +	clk_disable_unprepare(hdmi->hdmi_clk);
>  	clk_put(hdmi->hdmi_clk);
>  	if (hdmi->htop1)
>  		iounmap(hdmi->htop1);
> -- 
> 1.8.1.5
> 

Re: [PATCH 11/12] fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare

[Laurent Pinchart]

Hi Jean-Christophe,

On Thursday 31 October 2013 11:48:09 Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 23:49 Mon 28 Oct     , Laurent Pinchart wrote:
> > Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
> > clk_disable_unprepare() to get ready for the migration to the common
> > clock framework.
> > 
> > Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Thank you. Could you please pick patches 11/12 and 12/12 up for v3.13 or v3.14 
?

> > Cc: linux-fbdev@vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > 
> >  drivers/video/sh_mobile_hdmi.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/video/sh_mobile_hdmi.c
> > b/drivers/video/sh_mobile_hdmi.c index bfe4728..190145e 100644
> > --- a/drivers/video/sh_mobile_hdmi.c
> > +++ b/drivers/video/sh_mobile_hdmi.c
> > @@ -1326,7 +1326,7 @@ static int __init sh_hdmi_probe(struct
> > platform_device *pdev)> 
> >  		goto erate;
> >  	
> >  	}
> > 
> > -	ret = clk_enable(hdmi->hdmi_clk);
> > +	ret = clk_prepare_enable(hdmi->hdmi_clk);
> > 
> >  	if (ret < 0) {
> >  	
> >  		dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
> >  		goto erate;
> > 
> > @@ -1404,7 +1404,7 @@ emap_htop1:
> >  emap:
> >  	release_mem_region(res->start, resource_size(res));
> >  
> >  ereqreg:
> > -	clk_disable(hdmi->hdmi_clk);
> > +	clk_disable_unprepare(hdmi->hdmi_clk);
> > 
> >  erate:
> >  	clk_put(hdmi->hdmi_clk);
> >  
> >  egetclk:
> > @@ -1427,7 +1427,7 @@ static int __exit sh_hdmi_remove(struct
> > platform_device *pdev)> 
> >  	cancel_delayed_work_sync(&hdmi->edid_work);
> >  	pm_runtime_put(&pdev->dev);
> >  	pm_runtime_disable(&pdev->dev);
> > 
> > -	clk_disable(hdmi->hdmi_clk);
> > +	clk_disable_unprepare(hdmi->hdmi_clk);
> > 
> >  	clk_put(hdmi->hdmi_clk);
> >  	if (hdmi->htop1)
> >  	
> >  		iounmap(hdmi->htop1);

-- 
Regards,

Laurent Pinchart

Re: [PATCH 11/12] fbdev: shmobile-hdmi: Convert to clk_prepare/unprepare

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 712 bytes --]

On 2013-11-09 16:13, Laurent Pinchart wrote:
> Hi Jean-Christophe,
> 
> On Thursday 31 October 2013 11:48:09 Jean-Christophe PLAGNIOL-VILLARD wrote:
>> On 23:49 Mon 28 Oct     , Laurent Pinchart wrote:
>>> Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
>>> clk_disable_unprepare() to get ready for the migration to the common
>>> clock framework.
>>>
>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
>>> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
>>
>> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> 
> Thank you. Could you please pick patches 11/12 and 12/12 up for v3.13 or v3.14 
> ?

Thanks, picked both for 3.13.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]