linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 05/24] misc: max77693-haptic: use pwm_get_xxx() helpers where appropriate
Date: Mon, 16 Nov 2015 13:10:40 +0000	[thread overview]
Message-ID: <5649D5D0.6080204@samsung.com> (raw)
In-Reply-To: <1447664207-24370-6-git-send-email-boris.brezillon@free-electrons.com>

W dniu 16.11.2015 o 17:56, Boris Brezillon pisze:
> Use pwm_get_xxx() helpers instead of directly accessing the pwm->xxx field.
> Doing that will ease adaptation of the PWM framework to support atomic
> update.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> Patch generated with the following coccinelle script:
> 
> --->8---
> virtual patch
> 
> @@
> struct pwm_device *p;
> expression e;
> @@
> (
> -(p)->polarity = e;
> +pwm_set_polarity((p), e);
> |
> -(p)->polarity
> +pwm_get_polarity((p))
> |
> -(p)->period = e;
> +pwm_set_period((p), e);
> |
> -(p)->period
> +pwm_get_period((p))
> |
> -(p)->duty_cycle = e;
> +pwm_set_duty_cycle((p), e);
> |
> -(p)->duty_cycle
> +pwm_get_duty_cycle((p))
> )
> --->8---
> ---
>  drivers/input/misc/max77693-haptic.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
> index 6d96bff..a038fb3 100644
> --- a/drivers/input/misc/max77693-haptic.c
> +++ b/drivers/input/misc/max77693-haptic.c
> @@ -70,10 +70,11 @@ struct max77693_haptic {
>  
>  static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
>  {
> -	int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
> +	int delta = (pwm_get_period((haptic->pwm_dev)) + haptic->pwm_duty) / 2;

Double parentheses over argument are not needed so just:
pwm_get_period(haptic->pwm_dev) + ...

Beside that patch looks good, so with removing parentheses here and below:

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

>  	int error;
>  
> -	error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
> +	error = pwm_config(haptic->pwm_dev, delta,
> +			   pwm_get_period((haptic->pwm_dev)));
>  	if (error) {
>  		dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
>  		return error;
> @@ -245,7 +246,7 @@ static int max77693_haptic_play_effect(struct input_dev *dev, void *data,
>  	 * The formula to convert magnitude to pwm_duty as follows:
>  	 * - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF)
>  	 */
> -	period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
> +	period_mag_multi = (u64)pwm_get_period((haptic->pwm_dev)) * haptic->magnitude;
>  	haptic->pwm_duty = (unsigned int)(period_mag_multi >>
>  						MAX_MAGNITUDE_SHIFT);
>  
> 


  reply	other threads:[~2015-11-16 13:10 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-16  8:56 [PATCH v4 00/24] pwm: add support for atomic update Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 01/24] pwm: rcar: make use of pwm_is_enabled() Boris Brezillon
2016-03-16 14:30   ` Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 02/24] pwm: use pwm_get_xxx() helpers where appropriate Boris Brezillon
2015-11-16 17:46   ` Joachim Eastwood
2015-11-16 18:06     ` Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 03/24] clk: " Boris Brezillon
2015-12-30 21:03   ` Michael Turquette
2015-11-16  8:56 ` [PATCH v4 04/24] hwmon: pwm-fan: " Boris Brezillon
2015-11-16 15:59   ` Guenter Roeck
2015-11-16 16:53     ` Boris Brezillon
2015-11-16 17:00       ` Guenter Roeck
2015-11-16  8:56 ` [PATCH v4 05/24] misc: max77693-haptic: " Boris Brezillon
2015-11-16 13:10   ` Krzysztof Kozlowski [this message]
2015-11-16 13:55     ` Boris Brezillon
2015-11-16 15:55       ` Guenter Roeck
2015-11-16 16:00         ` Boris Brezillon
2015-11-17 17:32   ` Dmitry Torokhov
2015-11-16  8:56 ` [PATCH v4 06/24] pwm: introduce default period and polarity concepts Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 07/24] pwm: use pwm_get/set_default_xxx() helpers where appropriate Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 08/24] leds: " Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 09/24] regulator: " Boris Brezillon
2015-11-16 10:55   ` Mark Brown
2015-11-16 12:23     ` Boris Brezillon
2015-11-16 18:42       ` Mark Brown
2015-11-16 19:28         ` Boris Brezillon
2015-12-02 10:37         ` Boris Brezillon
2015-12-30 11:01           ` Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 10/24] backlight: " Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 11/24] fbdev: " Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 12/24] misc: max77693: " Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 13/24] hwmon: pwm-fan: " Boris Brezillon
2015-11-16 16:00   ` Guenter Roeck
2015-11-16  8:56 ` [PATCH v4 14/24] clk: pwm: " Boris Brezillon
2015-12-30 21:05   ` Michael Turquette
2015-11-16  8:56 ` [PATCH v4 15/24] pwm: define a new pwm_state struct Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 16/24] pwm: move the enabled/disabled info to " Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 17/24] backlight: pwm_bl: remove useless call to pwm_set_period Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 18/24] pwm: declare a default PWM state Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 19/24] pwm: add the PWM initial state retrieval infra Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 20/24] pwm: add the core infrastructure to allow atomic update Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 21/24] pwm: add information about polarity, duty cycle and period to debugfs Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 22/24] pwm: rockchip: add initial state retrieval Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 23/24] pwm: rockchip: add support for atomic update Boris Brezillon
2015-11-16  8:56 ` [PATCH v4 24/24] regulator: pwm: properly initialize the ->state field Boris Brezillon
2015-11-16 14:45 ` [PATCH v4 00/24] pwm: add support for atomic update Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5649D5D0.6080204@samsung.com \
    --to=k.kozlowski@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).