From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dan Murphy <dmurphy@ti.com>
Date: Thu, 12 Sep 2019 15:03:12 +0000
Subject: Re: [PATCH v3 1/2] dt-bindings: backlight: lm3630a: add enable_gpios
Message-Id: <5c8d25ab-e780-4e60-9723-cd65553f4db3@ti.com>
List-Id: <linux-fbdev.vger.kernel.org>
References: <20190911172106.12843-1-andreas@kemnade.info>
 <20190911172106.12843-2-andreas@kemnade.info>
 <ff410d6c-e1e8-7c96-e8f7-0a0deb816f6a@ti.com>
 <20190912165808.3c38b7a2@kemnade.info>
In-Reply-To: <20190912165808.3c38b7a2@kemnade.info>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: Andreas Kemnade <andreas@kemnade.info>
Cc: lee.jones@linaro.org, daniel.thompson@linaro.org, jingoohan1@gmail.com, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, "H. Nikolaus Schaller" <hns@goldelico.com>

Andreas

On 9/12/19 9:58 AM, Andreas Kemnade wrote:
> On Thu, 12 Sep 2019 06:39:50 -0500
> Dan Murphy <dmurphy@ti.com> wrote:
>
>> Andreas
>>
>> On 9/11/19 12:21 PM, Andreas Kemnade wrote:
>>> add enable-gpios to describe HWEN pin
>>>
>>> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
>>> Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
>>> ---
>>> changes in v2: added example
>>> changes in v3: added Acked-by
>>>    .../bindings/leds/backlight/lm3630a-backlight.yaml           | 5 +++=
++
>>>    1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-b=
acklight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-ba=
cklight.yaml
>>> index dc129d9a329e..1fa83feffe16 100644
>>> --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backligh=
t.yaml
>>> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backligh=
t.yaml
>>> @@ -29,6 +29,10 @@ properties:
>>>      '#size-cells':
>>>        const: 0
>>>   =20
>>> +  enable-gpios:
>>> +    description: GPIO to use to enable/disable the backlight (HWEN pin=
).
>>> +    maxItems: 1
>>> +
>>>    required:
>>>      - compatible
>>>      - reg
>>> @@ -92,6 +96,7 @@ examples:
>>>        i2c {
>>>            #address-cells =3D <1>;
>>>            #size-cells =3D <0>;
>>> +        enable-gpios =3D <&gpio2 5 GPIO_ACTIVE_HIGH>;
>>>   =20
>>>            led-controller@38 {
>>>                    compatible =3D "ti,lm3630a";
>> Looks good to me
>>
> well, the enable-gpios is still at the same place as in v2. This was sent
> before your comments to v2 have been arrived.

Ah I overlooked that.=A0 Yeah that still needs to move I assumed you moved =
it.

Dan


> Regards,
> Andreas