From: Michael Schmitz <schmitzmic@gmail.com>
To: Thomas Zimmermann <tzimmermann@suse.de>,
linux-m68k@vger.kernel.org, geert@linux-m68k.org,
Helge Deller <deller@gmx.de>
Cc: Miro Kropacek <miro.kropacek@gmail.com>, linux-fbdev@vger.kernel.org
Subject: Re: [PATCH v2 2/5] fbdev: Give atafb proper parent
Date: Wed, 19 Aug 2026 13:35:54 +1200 [thread overview]
Message-ID: <6b9e3cc6-8534-4dde-b2cc-505f1576a7f2@gmail.com> (raw)
In-Reply-To: <3347106a-f0f9-415a-94e4-94bc9b8182ef@suse.de>
Hi Thomas,
On 17/08/26 19:57, Thomas Zimmermann wrote:
>
>>
>>> If so, could you also replace the hard coded fb_info with a call to
>>> framebuffer_alloc()?
>>
>> Can't see how that would work - fb_info isn't passed to all functions
>> that need to use it, especially in the hardware detection phase
>> (hence the use of a static fb_info struct)?
>
> You'd have to modify the driver to pass the allocated instance, of
> course. It's not a trivial oneliner, but if this driver is still
> relevant, it might be worth improving it.
Wasn't all that hard after all - do you want that patch on top of the
current series or replacing Miro's patch 2, Helge?
Cheers,
Michael
>
> Best regards
> Thomas
>
>>
>> Cheers,
>>
>> Michael
>>
>>>>
>>>> Signed-off-by: Miro Kropacek <miro.kropacek@gmail.com>
>>>> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
>>>> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
>>>> Cc: <linux-fbdev@vger.kernel.org>
>>>> Link: https://lists.debian.org/debian-68k/2026/08/msg00000.html
>>>> ---
>>>> drivers/video/fbdev/atafb.c | 5 +++++
>>>> 1 file changed, 5 insertions(+)
>>>>
>>>> diff --git a/drivers/video/fbdev/atafb.c b/drivers/video/fbdev/atafb.c
>>>> index b8ed1c537293..3d540803dc2b 100644
>>>> --- a/drivers/video/fbdev/atafb.c
>>>> +++ b/drivers/video/fbdev/atafb.c
>>>> @@ -3101,6 +3101,11 @@ static int __init atafb_probe(struct
>>>> platform_device *pdev)
>>>> #endif /* ATAFB_EXT */
>>>> // strcpy(fb_info.mode->name, "Atari Builtin ");
>>>> + /* Parent the fb device properly: without this fb0 registers as a
>>>> + * virtual sysfs device with no /sys/class/graphics/fb0/device
>>>> link,
>>>> + * which makes Xorg's fbdevhw reject it ("No devices detected").
>>>> + */
>>>> + fb_info.device = &pdev->dev;
>>>
>>> Because this is supposed to happen in framebuffer_alloc() and
>>> keeping it
>>> there would be preferable.
>>>
>>> Best regards
>>> Thomas
>>>
>>>> fb_info.fbops = &atafb_ops;
>>>> // try to set default (detected; requested) var
>>>> do_fb_set_var(&atafb_predefined[default_par - 1], 1);
>>>
>>
>
next prev parent reply other threads:[~2026-08-19 1:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260816073752.16656-1-schmitzmic@gmail.com>
2026-08-16 7:37 ` [PATCH v2 2/5] fbdev: Give atafb proper parent Michael Schmitz
2026-08-16 14:38 ` Helge Deller
2026-08-16 18:37 ` Michael Schmitz
2026-08-17 6:34 ` Thomas Zimmermann
2026-08-17 7:49 ` Michael Schmitz
2026-08-17 7:57 ` Thomas Zimmermann
2026-08-17 19:11 ` Michael Schmitz
2026-08-19 1:35 ` Michael Schmitz [this message]
2026-08-16 7:37 ` [PATCH v2 3/5] fbdev: Add support for further video bit depths on atafb:external Michael Schmitz
2026-08-16 7:37 ` [PATCH v2 4/5] fbdev: Add support for SuperVidel's SuperBlitter Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b9e3cc6-8534-4dde-b2cc-505f1576a7f2@gmail.com \
--to=schmitzmic@gmail.com \
--cc=deller@gmx.de \
--cc=geert@linux-m68k.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=miro.kropacek@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox