* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation [not found] ` <20150311151731.GJ3800@phenom.ffwll.local> @ 2015-03-13 6:37 ` Archit Taneja 2015-03-13 9:06 ` Daniel Vetter 0 siblings, 1 reply; 13+ messages in thread From: Archit Taneja @ 2015-03-13 6:37 UTC (permalink / raw) To: linux-kernel, linux-arm-msm, Jani Nikula, daniel Cc: linux-fbdev, dri-devel, tomi.valkeinen, benjamin.gaignard, treding On 03/11/2015 08:47 PM, Daniel Vetter wrote: > On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >> >> >> On 03/10/2015 05:47 PM, Daniel Vetter wrote: >>> On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >>>> On 03/10/2015 03:35 PM, Daniel Vetter wrote: >>>>> On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >>>>>> On 03/10/2015 03:17 PM, Daniel Vetter wrote: >>>>>>> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >>>>>>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >>>>>>>> index 151a050..38f83a0 100644 >>>>>>>> --- a/drivers/gpu/drm/Kconfig >>>>>>>> +++ b/drivers/gpu/drm/Kconfig >>>>>>>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >>>>>>>> help >>>>>>>> FBDEV helpers for KMS drivers. >>>>>>>> >>>>>>>> +config DRM_FBDEV_EMULATION >>>>>>>> + bool "Enable legacy fbdev support for your modesetting driver" >>>>>>>> + depends on DRM >>>>>>>> + select DRM_KMS_HELPER >>>>>>>> + select DRM_KMS_FB_HELPER >>>>>>>> + select FB_SYS_FILLRECT >>>>>>>> + select FB_SYS_COPYAREA >>>>>>>> + select FB_SYS_IMAGEBLIT >>>>>>>> + select FB_SYS_FOPS >>>>>>>> + select FB_CFB_FILLRECT >>>>>>>> + select FB_CFB_COPYAREA >>>>>>>> + select FB_CFB_IMAGEBLIT >>>>>>>> + default y >>>>>>>> + help >>>>>>>> + Choose this option if you have a need for the legacy fbdev >>>>>>>> + support. Note that this support also provide the linux console >>>>>>>> + support on top of your modesetting driver. >>>>>>> >>>>>>> Maybe clarify that for linux console support you also need >>>>>>> CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >>>>>> >>>>>> DRM_KMS_FB_HELPER selects that for us, right? >>>>> >>>>> Hm right I've missed that. Reminds me that you need one more patch at the >>>>> end to remove all the various select DRM_KMS_FB_HELPER from all drm >>>>> drivers. Otherwise this knob here won't work by default if you e.g. select >>>>> radeon. In general we can't mix explicit options with menu entries with a >>>>> select. >>>> >>>> I was trying that out. Removing DRM_KMS_FB_HELPER and having >>>> DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in >>>> their respective xyz_fbdev.c files. >>> >>> But with the stubbed out functions that should work, right? Why doesn't >>> it? >> >> There are still calls to functions from fb core like fb_set_suspend and >> register_framebuffer which aren't covered by the drm fb helper functions. > > Hm, sounds like we need another patch to stub out fb_set_suspend when > fbdev isn't enabled. Is there anything else? There are a handful of fb core functions which are called by drm drivers: fb_alloc_cmap/fb_dealloc_cmap fb_sys_read/fb_sys_write register_framebuffer/unregister_framebuffer/unlink_framebuffer/ remove_conflicting_framebuffers fb_set_suspend fb_deferred_io_init/fb_deferred_io_cleanup framebuffer_alloc/framebuffer_release > >>>> Are you saying that we should remove DRM_KMS_FB_HELPER for such drivers and >>>> replace them with 'select DRM_FBDEV_EMULATION'? >>>> >>>> Another option would be to provide #ifdef DRM_FBDEV_EMULATION wrap-arounds >>>> for fb related function calls/declarations in each driver, something that's >>>> already done for i915 and msm drivers. >>> >>> The problem with the patch as-is the massive amounts of selects the FB >>> helper still has. We need to get rid of them so that when you disable >>> fbdev emulation you can indeed disable fbcon and the entire fbdev >>> subsystem. I've thought that remove the hidden symbol DRM_KMS_FB_HELPER >>> and moving all the selects to DRM_FBDEV_EMULATION should work out? If that >>> doesn't work we need to look again how to better stub things out I think. >> >> That's true. Also, as Jani pointed out, maybe it isn't the best idea to make >> every kms driver select DRM_FBDEV_EMULATION? >> >> Maybe the drivers that are currently built with fbdev emulation by default >> can add a 'depends on DRM_FBDEV_EMULATION'? Since the config defaults to y, >> the drivers should run as is. Later, we could take up each driver and build >> the fb stuff only when DRM_FBDEV_EMULATION is set, like how we do for i915 >> and msm? > > Yeah we definitely can't mix select with a user-visible option. I think we > just need to fix up the remaining functions and create stubs for them if > needed and then drop all the selects. Well in DRM_FBDEV_EMULATION we > should still select for fbcon since otherwise tons of bug reports about > "where is my fbcon with kms?". I'll give this a try. Although, it would be a better idea to make the drivers not call these at all when fbdev emulation isn't asked for. With the stubs, if someone does try to use the driver with DRM_FBDEV_EMULATION not set, the worst that'll happen would be that the driver fails to probe. Which isn't so bad. Archit -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-03-13 6:37 ` [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation Archit Taneja @ 2015-03-13 9:06 ` Daniel Vetter 2015-03-13 9:46 ` Jani Nikula ` (2 more replies) 0 siblings, 3 replies; 13+ messages in thread From: Daniel Vetter @ 2015-03-13 9:06 UTC (permalink / raw) To: Archit Taneja Cc: benjamin.gaignard, linux-arm-msm, linux-kernel, linux-fbdev, tomi.valkeinen, dri-devel, treding On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: > > > On 03/11/2015 08:47 PM, Daniel Vetter wrote: > >On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: > >> > >> > >>On 03/10/2015 05:47 PM, Daniel Vetter wrote: > >>>On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: > >>>>On 03/10/2015 03:35 PM, Daniel Vetter wrote: > >>>>>On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: > >>>>>>On 03/10/2015 03:17 PM, Daniel Vetter wrote: > >>>>>>>On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: > >>>>>>>>diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > >>>>>>>>index 151a050..38f83a0 100644 > >>>>>>>>--- a/drivers/gpu/drm/Kconfig > >>>>>>>>+++ b/drivers/gpu/drm/Kconfig > >>>>>>>>@@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER > >>>>>>>> help > >>>>>>>> FBDEV helpers for KMS drivers. > >>>>>>>> > >>>>>>>>+config DRM_FBDEV_EMULATION > >>>>>>>>+ bool "Enable legacy fbdev support for your modesetting driver" > >>>>>>>>+ depends on DRM > >>>>>>>>+ select DRM_KMS_HELPER > >>>>>>>>+ select DRM_KMS_FB_HELPER > >>>>>>>>+ select FB_SYS_FILLRECT > >>>>>>>>+ select FB_SYS_COPYAREA > >>>>>>>>+ select FB_SYS_IMAGEBLIT > >>>>>>>>+ select FB_SYS_FOPS > >>>>>>>>+ select FB_CFB_FILLRECT > >>>>>>>>+ select FB_CFB_COPYAREA > >>>>>>>>+ select FB_CFB_IMAGEBLIT > >>>>>>>>+ default y > >>>>>>>>+ help > >>>>>>>>+ Choose this option if you have a need for the legacy fbdev > >>>>>>>>+ support. Note that this support also provide the linux console > >>>>>>>>+ support on top of your modesetting driver. > >>>>>>> > >>>>>>>Maybe clarify that for linux console support you also need > >>>>>>>CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. > >>>>>> > >>>>>>DRM_KMS_FB_HELPER selects that for us, right? > >>>>> > >>>>>Hm right I've missed that. Reminds me that you need one more patch at the > >>>>>end to remove all the various select DRM_KMS_FB_HELPER from all drm > >>>>>drivers. Otherwise this knob here won't work by default if you e.g. select > >>>>>radeon. In general we can't mix explicit options with menu entries with a > >>>>>select. > >>>> > >>>>I was trying that out. Removing DRM_KMS_FB_HELPER and having > >>>>DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in > >>>>their respective xyz_fbdev.c files. > >>> > >>>But with the stubbed out functions that should work, right? Why doesn't > >>>it? > >> > >>There are still calls to functions from fb core like fb_set_suspend and > >>register_framebuffer which aren't covered by the drm fb helper functions. > > > >Hm, sounds like we need another patch to stub out fb_set_suspend when > >fbdev isn't enabled. Is there anything else? > > There are a handful of fb core functions which are called by drm drivers: > > fb_alloc_cmap/fb_dealloc_cmap > > fb_sys_read/fb_sys_write > > register_framebuffer/unregister_framebuffer/unlink_framebuffer/ > remove_conflicting_framebuffers > > fb_set_suspend > > fb_deferred_io_init/fb_deferred_io_cleanup > > framebuffer_alloc/framebuffer_release Hm yeah that's somewhat annoying indeed. What about the following: 1. We move all the #include <linux/fb.h> from drivers into drm_fb_helper.h 2. Then we add stubs for these functions in drm_fb_helper.h, like this #if defined(CONFIG_FB) #include <linux/fb.h> #else /* static inline stubs for all the fb stuff used by kms drivers */ #endif Imo this makes sense since kms drivers really have a bit a special situation with fbdev. They're not full-blown fbdev drivers and can be useful fully without fbdev. What do you think? -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-03-13 9:06 ` Daniel Vetter @ 2015-03-13 9:46 ` Jani Nikula 2015-03-13 11:12 ` Archit Taneja 2015-03-25 8:29 ` Archit Taneja 2 siblings, 0 replies; 13+ messages in thread From: Jani Nikula @ 2015-03-13 9:46 UTC (permalink / raw) To: Archit Taneja Cc: linux-kernel, linux-arm-msm, daniel, robdclark, airlied, treding, p.zabel, benjamin.gaignard, dri-devel, linux-fbdev, tomi.valkeinen On Fri, 13 Mar 2015, Daniel Vetter <daniel@ffwll.ch> wrote: > #if defined(CONFIG_FB) > #include <linux/fb.h> > #else Side note, #if IS_ENABLED(CONFIG_FB) BR, Jani. -- Jani Nikula, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-03-13 9:06 ` Daniel Vetter 2015-03-13 9:46 ` Jani Nikula @ 2015-03-13 11:12 ` Archit Taneja 2015-03-25 8:29 ` Archit Taneja 2 siblings, 0 replies; 13+ messages in thread From: Archit Taneja @ 2015-03-13 11:12 UTC (permalink / raw) To: treding, p.zabel, benjamin.gaignard, daniel Cc: linux-fbdev, linux-arm-msm, linux-kernel, dri-devel, tomi.valkeinen On 03/13/2015 02:36 PM, Daniel Vetter wrote: > On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: >> >> >> On 03/11/2015 08:47 PM, Daniel Vetter wrote: >>> On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >>>> >>>> >>>> On 03/10/2015 05:47 PM, Daniel Vetter wrote: >>>>> On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >>>>>> On 03/10/2015 03:35 PM, Daniel Vetter wrote: >>>>>>> On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >>>>>>>> On 03/10/2015 03:17 PM, Daniel Vetter wrote: >>>>>>>>> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >>>>>>>>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >>>>>>>>>> index 151a050..38f83a0 100644 >>>>>>>>>> --- a/drivers/gpu/drm/Kconfig >>>>>>>>>> +++ b/drivers/gpu/drm/Kconfig >>>>>>>>>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >>>>>>>>>> help >>>>>>>>>> FBDEV helpers for KMS drivers. >>>>>>>>>> >>>>>>>>>> +config DRM_FBDEV_EMULATION >>>>>>>>>> + bool "Enable legacy fbdev support for your modesetting driver" >>>>>>>>>> + depends on DRM >>>>>>>>>> + select DRM_KMS_HELPER >>>>>>>>>> + select DRM_KMS_FB_HELPER >>>>>>>>>> + select FB_SYS_FILLRECT >>>>>>>>>> + select FB_SYS_COPYAREA >>>>>>>>>> + select FB_SYS_IMAGEBLIT >>>>>>>>>> + select FB_SYS_FOPS >>>>>>>>>> + select FB_CFB_FILLRECT >>>>>>>>>> + select FB_CFB_COPYAREA >>>>>>>>>> + select FB_CFB_IMAGEBLIT >>>>>>>>>> + default y >>>>>>>>>> + help >>>>>>>>>> + Choose this option if you have a need for the legacy fbdev >>>>>>>>>> + support. Note that this support also provide the linux console >>>>>>>>>> + support on top of your modesetting driver. >>>>>>>>> >>>>>>>>> Maybe clarify that for linux console support you also need >>>>>>>>> CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >>>>>>>> >>>>>>>> DRM_KMS_FB_HELPER selects that for us, right? >>>>>>> >>>>>>> Hm right I've missed that. Reminds me that you need one more patch at the >>>>>>> end to remove all the various select DRM_KMS_FB_HELPER from all drm >>>>>>> drivers. Otherwise this knob here won't work by default if you e.g. select >>>>>>> radeon. In general we can't mix explicit options with menu entries with a >>>>>>> select. >>>>>> >>>>>> I was trying that out. Removing DRM_KMS_FB_HELPER and having >>>>>> DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in >>>>>> their respective xyz_fbdev.c files. >>>>> >>>>> But with the stubbed out functions that should work, right? Why doesn't >>>>> it? >>>> >>>> There are still calls to functions from fb core like fb_set_suspend and >>>> register_framebuffer which aren't covered by the drm fb helper functions. >>> >>> Hm, sounds like we need another patch to stub out fb_set_suspend when >>> fbdev isn't enabled. Is there anything else? >> >> There are a handful of fb core functions which are called by drm drivers: >> >> fb_alloc_cmap/fb_dealloc_cmap >> >> fb_sys_read/fb_sys_write >> >> register_framebuffer/unregister_framebuffer/unlink_framebuffer/ >> remove_conflicting_framebuffers >> >> fb_set_suspend >> >> fb_deferred_io_init/fb_deferred_io_cleanup >> >> framebuffer_alloc/framebuffer_release > > Hm yeah that's somewhat annoying indeed. What about the following: > 1. We move all the #include <linux/fb.h> from drivers into drm_fb_helper.h > > 2. Then we add stubs for these functions in drm_fb_helper.h, like this > > #if defined(CONFIG_FB) > #include <linux/fb.h> > #else > > /* static inline stubs for all the fb stuff used by kms drivers */ > #endif > > Imo this makes sense since kms drivers really have a bit a special > situation with fbdev. They're not full-blown fbdev drivers and can be > useful fully without fbdev. > > What do you think? This looks good! I'll give it a try. Archit -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-03-13 9:06 ` Daniel Vetter 2015-03-13 9:46 ` Jani Nikula 2015-03-13 11:12 ` Archit Taneja @ 2015-03-25 8:29 ` Archit Taneja 2015-03-25 9:21 ` Daniel Vetter 2 siblings, 1 reply; 13+ messages in thread From: Archit Taneja @ 2015-03-25 8:29 UTC (permalink / raw) To: robdclark, airlied, treding, p.zabel, benjamin.gaignard, dri-devel, daniel Cc: linux-arm-msm, linux-fbdev, tomi.valkeinen, linux-kernel Hi, On 03/13/2015 02:36 PM, Daniel Vetter wrote: > On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: >> >> >> On 03/11/2015 08:47 PM, Daniel Vetter wrote: >>> On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >>>> >>>> >>>> On 03/10/2015 05:47 PM, Daniel Vetter wrote: >>>>> On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >>>>>> On 03/10/2015 03:35 PM, Daniel Vetter wrote: >>>>>>> On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >>>>>>>> On 03/10/2015 03:17 PM, Daniel Vetter wrote: >>>>>>>>> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >>>>>>>>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >>>>>>>>>> index 151a050..38f83a0 100644 >>>>>>>>>> --- a/drivers/gpu/drm/Kconfig >>>>>>>>>> +++ b/drivers/gpu/drm/Kconfig >>>>>>>>>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >>>>>>>>>> help >>>>>>>>>> FBDEV helpers for KMS drivers. >>>>>>>>>> >>>>>>>>>> +config DRM_FBDEV_EMULATION >>>>>>>>>> + bool "Enable legacy fbdev support for your modesetting driver" >>>>>>>>>> + depends on DRM >>>>>>>>>> + select DRM_KMS_HELPER >>>>>>>>>> + select DRM_KMS_FB_HELPER >>>>>>>>>> + select FB_SYS_FILLRECT >>>>>>>>>> + select FB_SYS_COPYAREA >>>>>>>>>> + select FB_SYS_IMAGEBLIT >>>>>>>>>> + select FB_SYS_FOPS >>>>>>>>>> + select FB_CFB_FILLRECT >>>>>>>>>> + select FB_CFB_COPYAREA >>>>>>>>>> + select FB_CFB_IMAGEBLIT >>>>>>>>>> + default y >>>>>>>>>> + help >>>>>>>>>> + Choose this option if you have a need for the legacy fbdev >>>>>>>>>> + support. Note that this support also provide the linux console >>>>>>>>>> + support on top of your modesetting driver. >>>>>>>>> >>>>>>>>> Maybe clarify that for linux console support you also need >>>>>>>>> CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >>>>>>>> >>>>>>>> DRM_KMS_FB_HELPER selects that for us, right? >>>>>>> >>>>>>> Hm right I've missed that. Reminds me that you need one more patch at the >>>>>>> end to remove all the various select DRM_KMS_FB_HELPER from all drm >>>>>>> drivers. Otherwise this knob here won't work by default if you e.g. select >>>>>>> radeon. In general we can't mix explicit options with menu entries with a >>>>>>> select. >>>>>> >>>>>> I was trying that out. Removing DRM_KMS_FB_HELPER and having >>>>>> DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in >>>>>> their respective xyz_fbdev.c files. >>>>> >>>>> But with the stubbed out functions that should work, right? Why doesn't >>>>> it? >>>> >>>> There are still calls to functions from fb core like fb_set_suspend and >>>> register_framebuffer which aren't covered by the drm fb helper functions. >>> >>> Hm, sounds like we need another patch to stub out fb_set_suspend when >>> fbdev isn't enabled. Is there anything else? >> >> There are a handful of fb core functions which are called by drm drivers: >> >> fb_alloc_cmap/fb_dealloc_cmap >> >> fb_sys_read/fb_sys_write >> >> register_framebuffer/unregister_framebuffer/unlink_framebuffer/ >> remove_conflicting_framebuffers >> >> fb_set_suspend >> >> fb_deferred_io_init/fb_deferred_io_cleanup >> >> framebuffer_alloc/framebuffer_release > > Hm yeah that's somewhat annoying indeed. What about the following: > 1. We move all the #include <linux/fb.h> from drivers into drm_fb_helper.h > > 2. Then we add stubs for these functions in drm_fb_helper.h, like this > > #if defined(CONFIG_FB) > #include <linux/fb.h> > #else > > /* static inline stubs for all the fb stuff used by kms drivers */ > #endif > > Imo this makes sense since kms drivers really have a bit a special > situation with fbdev. They're not full-blown fbdev drivers and can be > useful fully without fbdev. > I was trying this out. Removing 'linux/fb.h' and replacing stub fb funcs won't really work because struct declarations(like fb_info) also get removed. I considered placing '#if IS_ENABLED(CONFIG_FB)' within linux/fb.h itself, but that seemed a bit too intrusive. This is what I'm currently doing: - Some funcs, like framebufer_alloc/release, alloc_cmap/dealloc_cmap would actually benefit if we have drm fb helpers for them. They are used in exactly the same manner by all the drivers. - For the rest of the functions that are sparsely used, I was considering making very simple drm_fb_* wrapper functions. Something like: void drm_fb_helper_deferred_io_init(struct drm_fb_helper *helper) { if (helper->fbdev) fb_deferred_io_init(helper->fbdev); } We could have all fb calls called within drm_fb_helper.c, creating drm_fb_helper_* stub functions would then be an easier task. What do you think? Archit -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-03-25 8:29 ` Archit Taneja @ 2015-03-25 9:21 ` Daniel Vetter 2015-06-30 7:10 ` Daniel Vetter 0 siblings, 1 reply; 13+ messages in thread From: Daniel Vetter @ 2015-03-25 9:21 UTC (permalink / raw) To: Archit Taneja Cc: robdclark, airlied, treding, p.zabel, benjamin.gaignard, dri-devel, daniel, linux-kernel, linux-arm-msm, Jani Nikula, linux-fbdev, tomi.valkeinen On Wed, Mar 25, 2015 at 01:47:54PM +0530, Archit Taneja wrote: > Hi, > > On 03/13/2015 02:36 PM, Daniel Vetter wrote: > >On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: > >> > >> > >>On 03/11/2015 08:47 PM, Daniel Vetter wrote: > >>>On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: > >>>> > >>>> > >>>>On 03/10/2015 05:47 PM, Daniel Vetter wrote: > >>>>>On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: > >>>>>>On 03/10/2015 03:35 PM, Daniel Vetter wrote: > >>>>>>>On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: > >>>>>>>>On 03/10/2015 03:17 PM, Daniel Vetter wrote: > >>>>>>>>>On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: > >>>>>>>>>>diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > >>>>>>>>>>index 151a050..38f83a0 100644 > >>>>>>>>>>--- a/drivers/gpu/drm/Kconfig > >>>>>>>>>>+++ b/drivers/gpu/drm/Kconfig > >>>>>>>>>>@@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER > >>>>>>>>>> help > >>>>>>>>>> FBDEV helpers for KMS drivers. > >>>>>>>>>> > >>>>>>>>>>+config DRM_FBDEV_EMULATION > >>>>>>>>>>+ bool "Enable legacy fbdev support for your modesetting driver" > >>>>>>>>>>+ depends on DRM > >>>>>>>>>>+ select DRM_KMS_HELPER > >>>>>>>>>>+ select DRM_KMS_FB_HELPER > >>>>>>>>>>+ select FB_SYS_FILLRECT > >>>>>>>>>>+ select FB_SYS_COPYAREA > >>>>>>>>>>+ select FB_SYS_IMAGEBLIT > >>>>>>>>>>+ select FB_SYS_FOPS > >>>>>>>>>>+ select FB_CFB_FILLRECT > >>>>>>>>>>+ select FB_CFB_COPYAREA > >>>>>>>>>>+ select FB_CFB_IMAGEBLIT > >>>>>>>>>>+ default y > >>>>>>>>>>+ help > >>>>>>>>>>+ Choose this option if you have a need for the legacy fbdev > >>>>>>>>>>+ support. Note that this support also provide the linux console > >>>>>>>>>>+ support on top of your modesetting driver. > >>>>>>>>> > >>>>>>>>>Maybe clarify that for linux console support you also need > >>>>>>>>>CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. > >>>>>>>> > >>>>>>>>DRM_KMS_FB_HELPER selects that for us, right? > >>>>>>> > >>>>>>>Hm right I've missed that. Reminds me that you need one more patch at the > >>>>>>>end to remove all the various select DRM_KMS_FB_HELPER from all drm > >>>>>>>drivers. Otherwise this knob here won't work by default if you e.g. select > >>>>>>>radeon. In general we can't mix explicit options with menu entries with a > >>>>>>>select. > >>>>>> > >>>>>>I was trying that out. Removing DRM_KMS_FB_HELPER and having > >>>>>>DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in > >>>>>>their respective xyz_fbdev.c files. > >>>>> > >>>>>But with the stubbed out functions that should work, right? Why doesn't > >>>>>it? > >>>> > >>>>There are still calls to functions from fb core like fb_set_suspend and > >>>>register_framebuffer which aren't covered by the drm fb helper functions. > >>> > >>>Hm, sounds like we need another patch to stub out fb_set_suspend when > >>>fbdev isn't enabled. Is there anything else? > >> > >>There are a handful of fb core functions which are called by drm drivers: > >> > >>fb_alloc_cmap/fb_dealloc_cmap > >> > >>fb_sys_read/fb_sys_write > >> > >>register_framebuffer/unregister_framebuffer/unlink_framebuffer/ > >>remove_conflicting_framebuffers > >> > >>fb_set_suspend > >> > >>fb_deferred_io_init/fb_deferred_io_cleanup > >> > >>framebuffer_alloc/framebuffer_release > > > >Hm yeah that's somewhat annoying indeed. What about the following: > >1. We move all the #include <linux/fb.h> from drivers into drm_fb_helper.h > > > >2. Then we add stubs for these functions in drm_fb_helper.h, like this > > > >#if defined(CONFIG_FB) > >#include <linux/fb.h> > >#else > > > >/* static inline stubs for all the fb stuff used by kms drivers */ > >#endif > > > >Imo this makes sense since kms drivers really have a bit a special > >situation with fbdev. They're not full-blown fbdev drivers and can be > >useful fully without fbdev. > > > > I was trying this out. Removing 'linux/fb.h' and replacing stub fb funcs > won't really work because struct declarations(like fb_info) also get > removed. > > I considered placing '#if IS_ENABLED(CONFIG_FB)' within linux/fb.h itself, > but that seemed a bit too intrusive. > > This is what I'm currently doing: > > - Some funcs, like framebufer_alloc/release, alloc_cmap/dealloc_cmap would > actually benefit if we have drm fb helpers for them. They are used in > exactly the same manner by all the drivers. > > - For the rest of the functions that are sparsely used, I was considering > making very simple drm_fb_* wrapper functions. Something like: > > void drm_fb_helper_deferred_io_init(struct drm_fb_helper *helper) > { > if (helper->fbdev) > fb_deferred_io_init(helper->fbdev); > } > > We could have all fb calls called within drm_fb_helper.c, creating > drm_fb_helper_* stub functions would then be an easier task. What do you > think? That's actually an option I considered, but I hoped we could do it with less work. If this indeed works and you can create the patch that would be awesome. Thanks, Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-03-25 9:21 ` Daniel Vetter @ 2015-06-30 7:10 ` Daniel Vetter 2015-06-30 7:56 ` Archit Taneja 0 siblings, 1 reply; 13+ messages in thread From: Daniel Vetter @ 2015-06-30 7:10 UTC (permalink / raw) To: Archit Taneja, Clark, Rob, Dave Airlie, Thierry Reding, Philipp Zabel, Benjamin Gaignard, dri-devel, Linux Kernel Mailing List, linux-arm-msm, Jani Nikula, Linux Fbdev development list, Tomi Valkeinen Any updates on this or too much distractions? I really think doing this would be awesome for the drm subsystem, instead of reinventing this wheel for each driver. -Daniel On Wed, Mar 25, 2015 at 10:21 AM, Daniel Vetter <daniel@ffwll.ch> wrote: > On Wed, Mar 25, 2015 at 01:47:54PM +0530, Archit Taneja wrote: >> Hi, >> >> On 03/13/2015 02:36 PM, Daniel Vetter wrote: >> >On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: >> >> >> >> >> >>On 03/11/2015 08:47 PM, Daniel Vetter wrote: >> >>>On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >> >>>> >> >>>> >> >>>>On 03/10/2015 05:47 PM, Daniel Vetter wrote: >> >>>>>On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >> >>>>>>On 03/10/2015 03:35 PM, Daniel Vetter wrote: >> >>>>>>>On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >> >>>>>>>>On 03/10/2015 03:17 PM, Daniel Vetter wrote: >> >>>>>>>>>On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >> >>>>>>>>>>diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >> >>>>>>>>>>index 151a050..38f83a0 100644 >> >>>>>>>>>>--- a/drivers/gpu/drm/Kconfig >> >>>>>>>>>>+++ b/drivers/gpu/drm/Kconfig >> >>>>>>>>>>@@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >> >>>>>>>>>> help >> >>>>>>>>>> FBDEV helpers for KMS drivers. >> >>>>>>>>>> >> >>>>>>>>>>+config DRM_FBDEV_EMULATION >> >>>>>>>>>>+ bool "Enable legacy fbdev support for your modesetting driver" >> >>>>>>>>>>+ depends on DRM >> >>>>>>>>>>+ select DRM_KMS_HELPER >> >>>>>>>>>>+ select DRM_KMS_FB_HELPER >> >>>>>>>>>>+ select FB_SYS_FILLRECT >> >>>>>>>>>>+ select FB_SYS_COPYAREA >> >>>>>>>>>>+ select FB_SYS_IMAGEBLIT >> >>>>>>>>>>+ select FB_SYS_FOPS >> >>>>>>>>>>+ select FB_CFB_FILLRECT >> >>>>>>>>>>+ select FB_CFB_COPYAREA >> >>>>>>>>>>+ select FB_CFB_IMAGEBLIT >> >>>>>>>>>>+ default y >> >>>>>>>>>>+ help >> >>>>>>>>>>+ Choose this option if you have a need for the legacy fbdev >> >>>>>>>>>>+ support. Note that this support also provide the linux console >> >>>>>>>>>>+ support on top of your modesetting driver. >> >>>>>>>>> >> >>>>>>>>>Maybe clarify that for linux console support you also need >> >>>>>>>>>CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >> >>>>>>>> >> >>>>>>>>DRM_KMS_FB_HELPER selects that for us, right? >> >>>>>>> >> >>>>>>>Hm right I've missed that. Reminds me that you need one more patch at the >> >>>>>>>end to remove all the various select DRM_KMS_FB_HELPER from all drm >> >>>>>>>drivers. Otherwise this knob here won't work by default if you e.g. select >> >>>>>>>radeon. In general we can't mix explicit options with menu entries with a >> >>>>>>>select. >> >>>>>> >> >>>>>>I was trying that out. Removing DRM_KMS_FB_HELPER and having >> >>>>>>DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in >> >>>>>>their respective xyz_fbdev.c files. >> >>>>> >> >>>>>But with the stubbed out functions that should work, right? Why doesn't >> >>>>>it? >> >>>> >> >>>>There are still calls to functions from fb core like fb_set_suspend and >> >>>>register_framebuffer which aren't covered by the drm fb helper functions. >> >>> >> >>>Hm, sounds like we need another patch to stub out fb_set_suspend when >> >>>fbdev isn't enabled. Is there anything else? >> >> >> >>There are a handful of fb core functions which are called by drm drivers: >> >> >> >>fb_alloc_cmap/fb_dealloc_cmap >> >> >> >>fb_sys_read/fb_sys_write >> >> >> >>register_framebuffer/unregister_framebuffer/unlink_framebuffer/ >> >>remove_conflicting_framebuffers >> >> >> >>fb_set_suspend >> >> >> >>fb_deferred_io_init/fb_deferred_io_cleanup >> >> >> >>framebuffer_alloc/framebuffer_release >> > >> >Hm yeah that's somewhat annoying indeed. What about the following: >> >1. We move all the #include <linux/fb.h> from drivers into drm_fb_helper.h >> > >> >2. Then we add stubs for these functions in drm_fb_helper.h, like this >> > >> >#if defined(CONFIG_FB) >> >#include <linux/fb.h> >> >#else >> > >> >/* static inline stubs for all the fb stuff used by kms drivers */ >> >#endif >> > >> >Imo this makes sense since kms drivers really have a bit a special >> >situation with fbdev. They're not full-blown fbdev drivers and can be >> >useful fully without fbdev. >> > >> >> I was trying this out. Removing 'linux/fb.h' and replacing stub fb funcs >> won't really work because struct declarations(like fb_info) also get >> removed. >> >> I considered placing '#if IS_ENABLED(CONFIG_FB)' within linux/fb.h itself, >> but that seemed a bit too intrusive. >> >> This is what I'm currently doing: >> >> - Some funcs, like framebufer_alloc/release, alloc_cmap/dealloc_cmap would >> actually benefit if we have drm fb helpers for them. They are used in >> exactly the same manner by all the drivers. >> >> - For the rest of the functions that are sparsely used, I was considering >> making very simple drm_fb_* wrapper functions. Something like: >> >> void drm_fb_helper_deferred_io_init(struct drm_fb_helper *helper) >> { >> if (helper->fbdev) >> fb_deferred_io_init(helper->fbdev); >> } >> >> We could have all fb calls called within drm_fb_helper.c, creating >> drm_fb_helper_* stub functions would then be an easier task. What do you >> think? > > That's actually an option I considered, but I hoped we could do it with > less work. If this indeed works and you can create the patch that would be > awesome. > > Thanks, Daniel > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-06-30 7:10 ` Daniel Vetter @ 2015-06-30 7:56 ` Archit Taneja 2015-06-30 8:31 ` Benjamin Gaignard 0 siblings, 1 reply; 13+ messages in thread From: Archit Taneja @ 2015-06-30 7:56 UTC (permalink / raw) To: Daniel Vetter, Clark, Rob, Dave Airlie, Thierry Reding, Philipp Zabel, Benjamin Gaignard, dri-devel, Linux Kernel Mailing List, linux-arm-msm, Jani Nikula, Linux Fbdev development list, Tomi Valkeinen Hi, On 06/30/2015 12:40 PM, Daniel Vetter wrote: > Any updates on this or too much distractions? I really think doing > this would be awesome for the drm subsystem, instead of reinventing > this wheel for each driver. I'd started on this again. I've got more free time now than before, so I should have something in a week or so. I agree it will help a lot (there are already two new drivers since we started discussing this!) Archit > -Daniel > > On Wed, Mar 25, 2015 at 10:21 AM, Daniel Vetter <daniel@ffwll.ch> wrote: >> On Wed, Mar 25, 2015 at 01:47:54PM +0530, Archit Taneja wrote: >>> Hi, >>> >>> On 03/13/2015 02:36 PM, Daniel Vetter wrote: >>>> On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: >>>>> >>>>> >>>>> On 03/11/2015 08:47 PM, Daniel Vetter wrote: >>>>>> On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >>>>>>> >>>>>>> >>>>>>> On 03/10/2015 05:47 PM, Daniel Vetter wrote: >>>>>>>> On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >>>>>>>>> On 03/10/2015 03:35 PM, Daniel Vetter wrote: >>>>>>>>>> On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >>>>>>>>>>> On 03/10/2015 03:17 PM, Daniel Vetter wrote: >>>>>>>>>>>> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >>>>>>>>>>>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >>>>>>>>>>>>> index 151a050..38f83a0 100644 >>>>>>>>>>>>> --- a/drivers/gpu/drm/Kconfig >>>>>>>>>>>>> +++ b/drivers/gpu/drm/Kconfig >>>>>>>>>>>>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >>>>>>>>>>>>> help >>>>>>>>>>>>> FBDEV helpers for KMS drivers. >>>>>>>>>>>>> >>>>>>>>>>>>> +config DRM_FBDEV_EMULATION >>>>>>>>>>>>> + bool "Enable legacy fbdev support for your modesetting driver" >>>>>>>>>>>>> + depends on DRM >>>>>>>>>>>>> + select DRM_KMS_HELPER >>>>>>>>>>>>> + select DRM_KMS_FB_HELPER >>>>>>>>>>>>> + select FB_SYS_FILLRECT >>>>>>>>>>>>> + select FB_SYS_COPYAREA >>>>>>>>>>>>> + select FB_SYS_IMAGEBLIT >>>>>>>>>>>>> + select FB_SYS_FOPS >>>>>>>>>>>>> + select FB_CFB_FILLRECT >>>>>>>>>>>>> + select FB_CFB_COPYAREA >>>>>>>>>>>>> + select FB_CFB_IMAGEBLIT >>>>>>>>>>>>> + default y >>>>>>>>>>>>> + help >>>>>>>>>>>>> + Choose this option if you have a need for the legacy fbdev >>>>>>>>>>>>> + support. Note that this support also provide the linux console >>>>>>>>>>>>> + support on top of your modesetting driver. >>>>>>>>>>>> >>>>>>>>>>>> Maybe clarify that for linux console support you also need >>>>>>>>>>>> CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >>>>>>>>>>> >>>>>>>>>>> DRM_KMS_FB_HELPER selects that for us, right? >>>>>>>>>> >>>>>>>>>> Hm right I've missed that. Reminds me that you need one more patch at the >>>>>>>>>> end to remove all the various select DRM_KMS_FB_HELPER from all drm >>>>>>>>>> drivers. Otherwise this knob here won't work by default if you e.g. select >>>>>>>>>> radeon. In general we can't mix explicit options with menu entries with a >>>>>>>>>> select. >>>>>>>>> >>>>>>>>> I was trying that out. Removing DRM_KMS_FB_HELPER and having >>>>>>>>> DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff internally in >>>>>>>>> their respective xyz_fbdev.c files. >>>>>>>> >>>>>>>> But with the stubbed out functions that should work, right? Why doesn't >>>>>>>> it? >>>>>>> >>>>>>> There are still calls to functions from fb core like fb_set_suspend and >>>>>>> register_framebuffer which aren't covered by the drm fb helper functions. >>>>>> >>>>>> Hm, sounds like we need another patch to stub out fb_set_suspend when >>>>>> fbdev isn't enabled. Is there anything else? >>>>> >>>>> There are a handful of fb core functions which are called by drm drivers: >>>>> >>>>> fb_alloc_cmap/fb_dealloc_cmap >>>>> >>>>> fb_sys_read/fb_sys_write >>>>> >>>>> register_framebuffer/unregister_framebuffer/unlink_framebuffer/ >>>>> remove_conflicting_framebuffers >>>>> >>>>> fb_set_suspend >>>>> >>>>> fb_deferred_io_init/fb_deferred_io_cleanup >>>>> >>>>> framebuffer_alloc/framebuffer_release >>>> >>>> Hm yeah that's somewhat annoying indeed. What about the following: >>>> 1. We move all the #include <linux/fb.h> from drivers into drm_fb_helper.h >>>> >>>> 2. Then we add stubs for these functions in drm_fb_helper.h, like this >>>> >>>> #if defined(CONFIG_FB) >>>> #include <linux/fb.h> >>>> #else >>>> >>>> /* static inline stubs for all the fb stuff used by kms drivers */ >>>> #endif >>>> >>>> Imo this makes sense since kms drivers really have a bit a special >>>> situation with fbdev. They're not full-blown fbdev drivers and can be >>>> useful fully without fbdev. >>>> >>> >>> I was trying this out. Removing 'linux/fb.h' and replacing stub fb funcs >>> won't really work because struct declarations(like fb_info) also get >>> removed. >>> >>> I considered placing '#if IS_ENABLED(CONFIG_FB)' within linux/fb.h itself, >>> but that seemed a bit too intrusive. >>> >>> This is what I'm currently doing: >>> >>> - Some funcs, like framebufer_alloc/release, alloc_cmap/dealloc_cmap would >>> actually benefit if we have drm fb helpers for them. They are used in >>> exactly the same manner by all the drivers. >>> >>> - For the rest of the functions that are sparsely used, I was considering >>> making very simple drm_fb_* wrapper functions. Something like: >>> >>> void drm_fb_helper_deferred_io_init(struct drm_fb_helper *helper) >>> { >>> if (helper->fbdev) >>> fb_deferred_io_init(helper->fbdev); >>> } >>> >>> We could have all fb calls called within drm_fb_helper.c, creating >>> drm_fb_helper_* stub functions would then be an easier task. What do you >>> think? >> >> That's actually an option I considered, but I hoped we could do it with >> less work. If this indeed works and you can create the patch that would be >> awesome. >> >> Thanks, Daniel >> -- >> Daniel Vetter >> Software Engineer, Intel Corporation >> http://blog.ffwll.ch > > > -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-06-30 7:56 ` Archit Taneja @ 2015-06-30 8:31 ` Benjamin Gaignard 2015-06-30 9:04 ` Daniel Vetter 2015-06-30 9:18 ` Archit Taneja 0 siblings, 2 replies; 13+ messages in thread From: Benjamin Gaignard @ 2015-06-30 8:31 UTC (permalink / raw) To: Archit Taneja Cc: Linux Fbdev development list, linux-arm-msm, Linux Kernel Mailing List, dri-devel, Tomi Valkeinen, Thierry Reding Hi, I think that what have been done by Rob with module_param is also a good idea: https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/msm/msm_drv.c?idé0dfec78ec288d6c89a7b508a5c5d4ae8b7f934 Can you mix compilation flag and module param ? Benjamin 2015-06-30 9:56 GMT+02:00 Archit Taneja <architt@codeaurora.org>: > Hi, > > On 06/30/2015 12:40 PM, Daniel Vetter wrote: >> >> Any updates on this or too much distractions? I really think doing >> this would be awesome for the drm subsystem, instead of reinventing >> this wheel for each driver. > > > I'd started on this again. I've got more free time now than before, so I > should have something in a week or so. I agree it will help a lot (there are > already two new drivers since we started discussing this!) > > Archit > > >> -Daniel >> >> On Wed, Mar 25, 2015 at 10:21 AM, Daniel Vetter <daniel@ffwll.ch> wrote: >>> >>> On Wed, Mar 25, 2015 at 01:47:54PM +0530, Archit Taneja wrote: >>>> >>>> Hi, >>>> >>>> On 03/13/2015 02:36 PM, Daniel Vetter wrote: >>>>> >>>>> On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: >>>>>> >>>>>> >>>>>> >>>>>> On 03/11/2015 08:47 PM, Daniel Vetter wrote: >>>>>>> >>>>>>> On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 03/10/2015 05:47 PM, Daniel Vetter wrote: >>>>>>>>> >>>>>>>>> On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >>>>>>>>>> >>>>>>>>>> On 03/10/2015 03:35 PM, Daniel Vetter wrote: >>>>>>>>>>> >>>>>>>>>>> On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >>>>>>>>>>>> >>>>>>>>>>>> On 03/10/2015 03:17 PM, Daniel Vetter wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >>>>>>>>>>>>>> index 151a050..38f83a0 100644 >>>>>>>>>>>>>> --- a/drivers/gpu/drm/Kconfig >>>>>>>>>>>>>> +++ b/drivers/gpu/drm/Kconfig >>>>>>>>>>>>>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >>>>>>>>>>>>>> help >>>>>>>>>>>>>> FBDEV helpers for KMS drivers. >>>>>>>>>>>>>> >>>>>>>>>>>>>> +config DRM_FBDEV_EMULATION >>>>>>>>>>>>>> + bool "Enable legacy fbdev support for your modesetting >>>>>>>>>>>>>> driver" >>>>>>>>>>>>>> + depends on DRM >>>>>>>>>>>>>> + select DRM_KMS_HELPER >>>>>>>>>>>>>> + select DRM_KMS_FB_HELPER >>>>>>>>>>>>>> + select FB_SYS_FILLRECT >>>>>>>>>>>>>> + select FB_SYS_COPYAREA >>>>>>>>>>>>>> + select FB_SYS_IMAGEBLIT >>>>>>>>>>>>>> + select FB_SYS_FOPS >>>>>>>>>>>>>> + select FB_CFB_FILLRECT >>>>>>>>>>>>>> + select FB_CFB_COPYAREA >>>>>>>>>>>>>> + select FB_CFB_IMAGEBLIT >>>>>>>>>>>>>> + default y >>>>>>>>>>>>>> + help >>>>>>>>>>>>>> + Choose this option if you have a need for the legacy >>>>>>>>>>>>>> fbdev >>>>>>>>>>>>>> + support. Note that this support also provide the linux >>>>>>>>>>>>>> console >>>>>>>>>>>>>> + support on top of your modesetting driver. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Maybe clarify that for linux console support you also need >>>>>>>>>>>>> CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> DRM_KMS_FB_HELPER selects that for us, right? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Hm right I've missed that. Reminds me that you need one more >>>>>>>>>>> patch at the >>>>>>>>>>> end to remove all the various select DRM_KMS_FB_HELPER from all >>>>>>>>>>> drm >>>>>>>>>>> drivers. Otherwise this knob here won't work by default if you >>>>>>>>>>> e.g. select >>>>>>>>>>> radeon. In general we can't mix explicit options with menu >>>>>>>>>>> entries with a >>>>>>>>>>> select. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I was trying that out. Removing DRM_KMS_FB_HELPER and having >>>>>>>>>> DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff >>>>>>>>>> internally in >>>>>>>>>> their respective xyz_fbdev.c files. >>>>>>>>> >>>>>>>>> >>>>>>>>> But with the stubbed out functions that should work, right? Why >>>>>>>>> doesn't >>>>>>>>> it? >>>>>>>> >>>>>>>> >>>>>>>> There are still calls to functions from fb core like fb_set_suspend >>>>>>>> and >>>>>>>> register_framebuffer which aren't covered by the drm fb helper >>>>>>>> functions. >>>>>>> >>>>>>> >>>>>>> Hm, sounds like we need another patch to stub out fb_set_suspend when >>>>>>> fbdev isn't enabled. Is there anything else? >>>>>> >>>>>> >>>>>> There are a handful of fb core functions which are called by drm >>>>>> drivers: >>>>>> >>>>>> fb_alloc_cmap/fb_dealloc_cmap >>>>>> >>>>>> fb_sys_read/fb_sys_write >>>>>> >>>>>> register_framebuffer/unregister_framebuffer/unlink_framebuffer/ >>>>>> remove_conflicting_framebuffers >>>>>> >>>>>> fb_set_suspend >>>>>> >>>>>> fb_deferred_io_init/fb_deferred_io_cleanup >>>>>> >>>>>> framebuffer_alloc/framebuffer_release >>>>> >>>>> >>>>> Hm yeah that's somewhat annoying indeed. What about the following: >>>>> 1. We move all the #include <linux/fb.h> from drivers into >>>>> drm_fb_helper.h >>>>> >>>>> 2. Then we add stubs for these functions in drm_fb_helper.h, like this >>>>> >>>>> #if defined(CONFIG_FB) >>>>> #include <linux/fb.h> >>>>> #else >>>>> >>>>> /* static inline stubs for all the fb stuff used by kms drivers */ >>>>> #endif >>>>> >>>>> Imo this makes sense since kms drivers really have a bit a special >>>>> situation with fbdev. They're not full-blown fbdev drivers and can be >>>>> useful fully without fbdev. >>>>> >>>> >>>> I was trying this out. Removing 'linux/fb.h' and replacing stub fb funcs >>>> won't really work because struct declarations(like fb_info) also get >>>> removed. >>>> >>>> I considered placing '#if IS_ENABLED(CONFIG_FB)' within linux/fb.h >>>> itself, >>>> but that seemed a bit too intrusive. >>>> >>>> This is what I'm currently doing: >>>> >>>> - Some funcs, like framebufer_alloc/release, alloc_cmap/dealloc_cmap >>>> would >>>> actually benefit if we have drm fb helpers for them. They are used in >>>> exactly the same manner by all the drivers. >>>> >>>> - For the rest of the functions that are sparsely used, I was >>>> considering >>>> making very simple drm_fb_* wrapper functions. Something like: >>>> >>>> void drm_fb_helper_deferred_io_init(struct drm_fb_helper *helper) >>>> { >>>> if (helper->fbdev) >>>> fb_deferred_io_init(helper->fbdev); >>>> } >>>> >>>> We could have all fb calls called within drm_fb_helper.c, creating >>>> drm_fb_helper_* stub functions would then be an easier task. What do you >>>> think? >>> >>> >>> That's actually an option I considered, but I hoped we could do it with >>> less work. If this indeed works and you can create the patch that would >>> be >>> awesome. >>> >>> Thanks, Daniel >>> -- >>> Daniel Vetter >>> Software Engineer, Intel Corporation >>> http://blog.ffwll.ch >> >> >> >> > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project -- Benjamin Gaignard Graphic Working Group Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-06-30 8:31 ` Benjamin Gaignard @ 2015-06-30 9:04 ` Daniel Vetter 2015-07-03 12:32 ` Thierry Reding 2015-06-30 9:18 ` Archit Taneja 1 sibling, 1 reply; 13+ messages in thread From: Daniel Vetter @ 2015-06-30 9:04 UTC (permalink / raw) To: Benjamin Gaignard Cc: linux-arm-msm, Linux Kernel Mailing List, dri-devel, Linux Fbdev development list, Tomi Valkeinen, Thierry Reding On Tue, Jun 30, 2015 at 10:31 AM, Benjamin Gaignard <benjamin.gaignard@linaro.org> wrote: > I think that what have been done by Rob with module_param is also a good idea: > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/msm/msm_drv.c?idé0dfec78ec288d6c89a7b508a5c5d4ae8b7f934 > > Can you mix compilation flag and module param ? Hm, the point of the kconfig is to not require all the legacy baggage from fbdev. But I guess a module option could be added later on too. bochs has it too. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-06-30 9:04 ` Daniel Vetter @ 2015-07-03 12:32 ` Thierry Reding 2015-07-03 13:33 ` Rob Clark 0 siblings, 1 reply; 13+ messages in thread From: Thierry Reding @ 2015-07-03 12:32 UTC (permalink / raw) To: Daniel Vetter Cc: Linux Fbdev development list, linux-arm-msm, Linux Kernel Mailing List, dri-devel, Tomi Valkeinen, Benjamin Gaignard, Thierry Reding [-- Attachment #1: Type: text/plain, Size: 956 bytes --] On Tue, Jun 30, 2015 at 11:04:45AM +0200, Daniel Vetter wrote: > On Tue, Jun 30, 2015 at 10:31 AM, Benjamin Gaignard > <benjamin.gaignard@linaro.org> wrote: > > I think that what have been done by Rob with module_param is also a good idea: > > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/msm/msm_drv.c?id=e90dfec78ec288d6c89a7b508a5c5d4ae8b7f934 > > > > Can you mix compilation flag and module param ? > > Hm, the point of the kconfig is to not require all the legacy baggage > from fbdev. But I guess a module option could be added later on too. > bochs has it too. I think the option would primarily be useful for testing. I've often needed to test modesetting code without fbdev getting in the way and the only way to currently do that is by recompiling with legacy fbdev disabled. The option would allow an fbdev-enabled kernel to be used but disable the fbdev code if desired. Thierry [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-07-03 12:32 ` Thierry Reding @ 2015-07-03 13:33 ` Rob Clark 0 siblings, 0 replies; 13+ messages in thread From: Rob Clark @ 2015-07-03 13:33 UTC (permalink / raw) To: Thierry Reding Cc: Linux Fbdev development list, Benjamin Gaignard, linux-arm-msm, Linux Kernel Mailing List, dri-devel, Tomi Valkeinen, Thierry Reding On Fri, Jul 3, 2015 at 8:32 AM, Thierry Reding <thierry.reding@gmail.com> wrote: > On Tue, Jun 30, 2015 at 11:04:45AM +0200, Daniel Vetter wrote: >> On Tue, Jun 30, 2015 at 10:31 AM, Benjamin Gaignard >> <benjamin.gaignard@linaro.org> wrote: >> > I think that what have been done by Rob with module_param is also a good idea: >> > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/msm/msm_drv.c?idé0dfec78ec288d6c89a7b508a5c5d4ae8b7f934 >> > >> > Can you mix compilation flag and module param ? >> >> Hm, the point of the kconfig is to not require all the legacy baggage >> from fbdev. But I guess a module option could be added later on too. >> bochs has it too. > > I think the option would primarily be useful for testing. I've often > needed to test modesetting code without fbdev getting in the way and the > only way to currently do that is by recompiling with legacy fbdev > disabled. The option would allow an fbdev-enabled kernel to be used but > disable the fbdev code if desired. and for debugging.. when things are going wrong it's nice for the first modeset to not happen under console_lock ;-) BR, -R > Thierry > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel > ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation 2015-06-30 8:31 ` Benjamin Gaignard 2015-06-30 9:04 ` Daniel Vetter @ 2015-06-30 9:18 ` Archit Taneja 1 sibling, 0 replies; 13+ messages in thread From: Archit Taneja @ 2015-06-30 9:18 UTC (permalink / raw) To: Benjamin Gaignard Cc: Linux Fbdev development list, linux-arm-msm, Linux Kernel Mailing List, dri-devel, Tomi Valkeinen, Thierry Reding Hi, On 06/30/2015 02:01 PM, Benjamin Gaignard wrote: > Hi, > > I think that what have been done by Rob with module_param is also a good idea: > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/msm/msm_drv.c?idé0dfec78ec288d6c89a7b508a5c5d4ae8b7f934 > > Can you mix compilation flag and module param ? I guess this won't be hard to do once we have a common fbdev emulation config option. We could consider this as a drm top level module param. I'll keep this in mind. Thanks, Archit > > Benjamin > > 2015-06-30 9:56 GMT+02:00 Archit Taneja <architt@codeaurora.org>: >> Hi, >> >> On 06/30/2015 12:40 PM, Daniel Vetter wrote: >>> >>> Any updates on this or too much distractions? I really think doing >>> this would be awesome for the drm subsystem, instead of reinventing >>> this wheel for each driver. >> >> >> I'd started on this again. I've got more free time now than before, so I >> should have something in a week or so. I agree it will help a lot (there are >> already two new drivers since we started discussing this!) >> >> Archit >> >> >>> -Daniel >>> >>> On Wed, Mar 25, 2015 at 10:21 AM, Daniel Vetter <daniel@ffwll.ch> wrote: >>>> >>>> On Wed, Mar 25, 2015 at 01:47:54PM +0530, Archit Taneja wrote: >>>>> >>>>> Hi, >>>>> >>>>> On 03/13/2015 02:36 PM, Daniel Vetter wrote: >>>>>> >>>>>> On Fri, Mar 13, 2015 at 11:55:07AM +0530, Archit Taneja wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> On 03/11/2015 08:47 PM, Daniel Vetter wrote: >>>>>>>> >>>>>>>> On Wed, Mar 11, 2015 at 01:51:02PM +0530, Archit Taneja wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On 03/10/2015 05:47 PM, Daniel Vetter wrote: >>>>>>>>>> >>>>>>>>>> On Tue, Mar 10, 2015 at 03:52:41PM +0530, Archit Taneja wrote: >>>>>>>>>>> >>>>>>>>>>> On 03/10/2015 03:35 PM, Daniel Vetter wrote: >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Mar 10, 2015 at 03:22:49PM +0530, Archit Taneja wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> On 03/10/2015 03:17 PM, Daniel Vetter wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig >>>>>>>>>>>>>>> index 151a050..38f83a0 100644 >>>>>>>>>>>>>>> --- a/drivers/gpu/drm/Kconfig >>>>>>>>>>>>>>> +++ b/drivers/gpu/drm/Kconfig >>>>>>>>>>>>>>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER >>>>>>>>>>>>>>> help >>>>>>>>>>>>>>> FBDEV helpers for KMS drivers. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> +config DRM_FBDEV_EMULATION >>>>>>>>>>>>>>> + bool "Enable legacy fbdev support for your modesetting >>>>>>>>>>>>>>> driver" >>>>>>>>>>>>>>> + depends on DRM >>>>>>>>>>>>>>> + select DRM_KMS_HELPER >>>>>>>>>>>>>>> + select DRM_KMS_FB_HELPER >>>>>>>>>>>>>>> + select FB_SYS_FILLRECT >>>>>>>>>>>>>>> + select FB_SYS_COPYAREA >>>>>>>>>>>>>>> + select FB_SYS_IMAGEBLIT >>>>>>>>>>>>>>> + select FB_SYS_FOPS >>>>>>>>>>>>>>> + select FB_CFB_FILLRECT >>>>>>>>>>>>>>> + select FB_CFB_COPYAREA >>>>>>>>>>>>>>> + select FB_CFB_IMAGEBLIT >>>>>>>>>>>>>>> + default y >>>>>>>>>>>>>>> + help >>>>>>>>>>>>>>> + Choose this option if you have a need for the legacy >>>>>>>>>>>>>>> fbdev >>>>>>>>>>>>>>> + support. Note that this support also provide the linux >>>>>>>>>>>>>>> console >>>>>>>>>>>>>>> + support on top of your modesetting driver. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Maybe clarify that for linux console support you also need >>>>>>>>>>>>>> CONFIG_FRAMEBUFFER_CONSOLE? fbdev alone isn't enough. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> DRM_KMS_FB_HELPER selects that for us, right? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Hm right I've missed that. Reminds me that you need one more >>>>>>>>>>>> patch at the >>>>>>>>>>>> end to remove all the various select DRM_KMS_FB_HELPER from all >>>>>>>>>>>> drm >>>>>>>>>>>> drivers. Otherwise this knob here won't work by default if you >>>>>>>>>>>> e.g. select >>>>>>>>>>>> radeon. In general we can't mix explicit options with menu >>>>>>>>>>>> entries with a >>>>>>>>>>>> select. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I was trying that out. Removing DRM_KMS_FB_HELPER and having >>>>>>>>>>> DRM_FBDEV_EMULATION disabled breaks drivers which use FB stuff >>>>>>>>>>> internally in >>>>>>>>>>> their respective xyz_fbdev.c files. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> But with the stubbed out functions that should work, right? Why >>>>>>>>>> doesn't >>>>>>>>>> it? >>>>>>>>> >>>>>>>>> >>>>>>>>> There are still calls to functions from fb core like fb_set_suspend >>>>>>>>> and >>>>>>>>> register_framebuffer which aren't covered by the drm fb helper >>>>>>>>> functions. >>>>>>>> >>>>>>>> >>>>>>>> Hm, sounds like we need another patch to stub out fb_set_suspend when >>>>>>>> fbdev isn't enabled. Is there anything else? >>>>>>> >>>>>>> >>>>>>> There are a handful of fb core functions which are called by drm >>>>>>> drivers: >>>>>>> >>>>>>> fb_alloc_cmap/fb_dealloc_cmap >>>>>>> >>>>>>> fb_sys_read/fb_sys_write >>>>>>> >>>>>>> register_framebuffer/unregister_framebuffer/unlink_framebuffer/ >>>>>>> remove_conflicting_framebuffers >>>>>>> >>>>>>> fb_set_suspend >>>>>>> >>>>>>> fb_deferred_io_init/fb_deferred_io_cleanup >>>>>>> >>>>>>> framebuffer_alloc/framebuffer_release >>>>>> >>>>>> >>>>>> Hm yeah that's somewhat annoying indeed. What about the following: >>>>>> 1. We move all the #include <linux/fb.h> from drivers into >>>>>> drm_fb_helper.h >>>>>> >>>>>> 2. Then we add stubs for these functions in drm_fb_helper.h, like this >>>>>> >>>>>> #if defined(CONFIG_FB) >>>>>> #include <linux/fb.h> >>>>>> #else >>>>>> >>>>>> /* static inline stubs for all the fb stuff used by kms drivers */ >>>>>> #endif >>>>>> >>>>>> Imo this makes sense since kms drivers really have a bit a special >>>>>> situation with fbdev. They're not full-blown fbdev drivers and can be >>>>>> useful fully without fbdev. >>>>>> >>>>> >>>>> I was trying this out. Removing 'linux/fb.h' and replacing stub fb funcs >>>>> won't really work because struct declarations(like fb_info) also get >>>>> removed. >>>>> >>>>> I considered placing '#if IS_ENABLED(CONFIG_FB)' within linux/fb.h >>>>> itself, >>>>> but that seemed a bit too intrusive. >>>>> >>>>> This is what I'm currently doing: >>>>> >>>>> - Some funcs, like framebufer_alloc/release, alloc_cmap/dealloc_cmap >>>>> would >>>>> actually benefit if we have drm fb helpers for them. They are used in >>>>> exactly the same manner by all the drivers. >>>>> >>>>> - For the rest of the functions that are sparsely used, I was >>>>> considering >>>>> making very simple drm_fb_* wrapper functions. Something like: >>>>> >>>>> void drm_fb_helper_deferred_io_init(struct drm_fb_helper *helper) >>>>> { >>>>> if (helper->fbdev) >>>>> fb_deferred_io_init(helper->fbdev); >>>>> } >>>>> >>>>> We could have all fb calls called within drm_fb_helper.c, creating >>>>> drm_fb_helper_* stub functions would then be an easier task. What do you >>>>> think? >>>> >>>> >>>> That's actually an option I considered, but I hoped we could do it with >>>> less work. If this indeed works and you can create the patch that would >>>> be >>>> awesome. >>>> >>>> Thanks, Daniel >>>> -- >>>> Daniel Vetter >>>> Software Engineer, Intel Corporation >>>> http://blog.ffwll.ch >>> >>> >>> >>> >> >> -- >> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, >> a Linux Foundation Collaborative Project > > > -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-07-03 13:33 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1425980493-27533-1-git-send-email-architt@codeaurora.org>
[not found] ` <1425980493-27533-2-git-send-email-architt@codeaurora.org>
[not found] ` <20150310094756.GE3800@phenom.ffwll.local>
[not found] ` <54FEBEF1.5000103@codeaurora.org>
[not found] ` <20150310100547.GG3800@phenom.ffwll.local>
[not found] ` <54FEC5F1.90208@codeaurora.org>
[not found] ` <20150310121702.GO3800@phenom.ffwll.local>
[not found] ` <54FFFAEE.3020301@codeaurora.org>
[not found] ` <20150311151731.GJ3800@phenom.ffwll.local>
2015-03-13 6:37 ` [RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation Archit Taneja
2015-03-13 9:06 ` Daniel Vetter
2015-03-13 9:46 ` Jani Nikula
2015-03-13 11:12 ` Archit Taneja
2015-03-25 8:29 ` Archit Taneja
2015-03-25 9:21 ` Daniel Vetter
2015-06-30 7:10 ` Daniel Vetter
2015-06-30 7:56 ` Archit Taneja
2015-06-30 8:31 ` Benjamin Gaignard
2015-06-30 9:04 ` Daniel Vetter
2015-07-03 12:32 ` Thierry Reding
2015-07-03 13:33 ` Rob Clark
2015-06-30 9:18 ` Archit Taneja
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).