From: Greg Stark <gsstark@mit.edu>
To: "Ville Syrjälä" <syrjala@sci.fi>
Cc: linux-fbdev-devel@lists.sourceforge.net, Greg Stark <gsstark@mit.edu>
Subject: Re: Fw: atyfb doesn't work for me
Date: 04 Apr 2006 19:19:51 -0400 [thread overview]
Message-ID: <87vetp9be0.fsf@stark.xeocode.com> (raw)
In-Reply-To: <20060404151655.GA28811@sci.fi>
Ville Syrjälä <syrjala@sci.fi> writes:
> Unfortunately atyfb relies on the BIOS to initialize the card. You seem
> to have multiple cards in your system which won't work.
Incidentally, trying to remove the atyfb device when it's in this state
appears to generate an OOPS:
Apr 4 17:46:55 stark kernel: [78869.693237] Unable to handle kernel NULL pointer dereference at virtual address 0000030c
Apr 4 17:46:55 stark kernel: [78869.693246] printing eip:
Apr 4 17:46:55 stark kernel: [78869.693250] f8861fed
Apr 4 17:46:55 stark kernel: [78869.693259] *pde = 00000000
Apr 4 17:46:55 stark kernel: [78869.693274] Oops: 0000 [#1]
Apr 4 17:46:55 stark kernel: [78869.693287] PREEMPT SMP
Apr 4 17:46:55 stark kernel: [78869.693302] Modules linked in: binfmt_misc lirc_dev sg ipv6 cx88_dvb cx88_vp3054_i2c mt352 or51132 video_buf_dvb dvb_core crc32 nxt200x cx24123 lgdt330x cx22702 dvb_pll cx88_blackbird cx8802 cx8800 cx88xx bttv video_buf compat_ioctl32 i2c_algo_bit btcx_risc ir_common usb_storage snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc hw_random ehci_hcd uhci_hcd usbcore 8250 serial_core parport_pc lp parport w83627hf hwmon_vid eeprom i2c_isa i2c_i801 ivtv_fb msp3400 saa7127 saa7115 tda9887 tuner v4l2_common ivtv firmware_class v4l1_compat tveeprom i2c_core videodev atyfb fb cfbcopyarea cfbimgblt cfbfillrect gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd intel_agp agpgart sk98lin rtc
Apr 4 17:46:55 stark kernel: [78869.693466] CPU: 1
Apr 4 17:46:55 stark kernel: [78869.693467] EIP: 0060:[pg0+943517677/1068938240] Tainted: GF VLI
Apr 4 17:46:55 stark kernel: [78869.693469] EFLAGS: 00010206 (2.6.16-fb #1)
Apr 4 17:46:55 stark kernel: [78869.693483] EIP is at aty_set_crtc+0xa/0x68 [atyfb]
Apr 4 17:46:55 stark kernel: [78869.693488] eax: 00000000 ebx: 04000000 ecx: 00000001 edx: f88687c0
Apr 4 17:46:55 stark kernel: [78869.693494] esi: f4ff6000 edi: f8867d4c ebp: f8867d9c esp: e0135ef0
Apr 4 17:46:55 stark kernel: [78869.693499] ds: 007b es: 007b ss: 0068
Apr 4 17:46:55 stark kernel: [78869.693504] Process rmmod (pid: 10452, threadinfo=e0134000 task=c1bbca70)
Apr 4 17:46:55 stark kernel: [78869.693508] Stack: <0>00000000 f8862065 c1b5ac00 c1b5ac48 c0214732 c1b5acd0 c024b57c c1b5ac48
Apr 4 17:46:55 stark kernel: [78869.693525] c1b5ac88 f8867d4c c024b830 f8867da4 c03a07a0 f8867d4c c03a07a0 e0134000
Apr 4 17:46:55 stark kernel: [78869.693541] c024b10a f8867d4c f8868480 e0134000 c024bae9 f8867d20 c0214678 f8864f24
Apr 4 17:46:55 stark kernel: [78869.693556] Call Trace:
Apr 4 17:46:55 stark kernel: [78869.693564] [pg0+943517797/1068938240] atyfb_pci_remove+0x1a/0xc8 [atyfb]
Apr 4 17:46:55 stark kernel: [78869.693579] [pci_device_remove+22/40] pci_device_remove+0x16/0x28
Apr 4 17:46:55 stark kernel: [78869.693592] [__device_release_driver+82/119] __device_release_driver+0x52/0x77
Apr 4 17:46:55 stark kernel: [78869.693608] [driver_detach+163/165] driver_detach+0xa3/0xa5
Apr 4 17:46:55 stark kernel: [78869.693625] [bus_remove_driver+97/127] bus_remove_driver+0x61/0x7f
Apr 4 17:46:55 stark kernel: [78869.693639] [driver_unregister+8/19] driver_unregister+0x8/0x13
Apr 4 17:46:55 stark kernel: [78869.693649] [pci_unregister_driver+14/102] pci_unregister_driver+0xe/0x66
Apr 4 17:46:55 stark kernel: [78869.693658] [pg0+943529764/1068938240] atyfb_exit+0x0/0xa [atyfb]
Apr 4 17:46:55 stark kernel: [78869.693675] [sys_delete_module+311/427] sys_delete_module+0x137/0x1ab
Apr 4 17:46:55 stark kernel: [78869.693689] [remove_vma+49/54] remove_vma+0x31/0x36
Apr 4 17:46:55 stark kernel: [78869.693702] [do_munmap+375/462] do_munmap+0x177/0x1ce
Apr 4 17:46:55 stark kernel: [78869.693740] [syscall_call+7/11] syscall_call+0x7/0xb
Apr 4 17:46:55 stark kernel: [78869.693783] Code: 81 ca 44 00 00 04 89 51 1c eb e5 81 ca 48 00 00 04 89 51 1c eb da 81 ca 40 00 00 04 89 51 1c eb cf 53 8b 5a 2c 81 e3 ff ff ff fd <8b> 88 0c 03 00 00 89 59 1c 8b 5a 14 8b 88 0c 03 00 00 89 19 8b
--
greg
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
prev parent reply other threads:[~2006-04-04 23:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-04 10:03 Fw: atyfb doesn't work for me Andrew Morton
2006-04-04 15:16 ` Ville Syrjälä
2006-04-04 16:50 ` Greg Stark
2006-04-04 17:22 ` Ville Syrjälä
2006-04-04 20:59 ` Greg Stark
2006-04-05 8:53 ` Dave Airlie
2006-04-04 23:19 ` Greg Stark [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vetp9be0.fsf@stark.xeocode.com \
--to=gsstark@mit.edu \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=syrjala@sci.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).