* [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-13 9:51 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value Tomi Valkeinen
` (2 more replies)
2011-06-09 13:56 ` [PATCHv2 02/28] OMAP: DSS2: Taal: Make driver more fault tolerant Tomi Valkeinen
` (27 subsequent siblings)
28 siblings, 3 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
get_context_loss_count functions return context loss count as u32, and
zero means an error. However, zero is also returned when context has
never been lost and could also be returned when the context loss count
has wrapped and goes to zero.
Change the functions to return an int, with negative value meaning an
error.
OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the
hsmmc code handles the returned value as an int, with negative value
meaning an error, this patch actually fixes hsmmc code also.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 2 +-
arch/arm/mach-omap2/powerdomain.c | 14 ++++++++++----
arch/arm/mach-omap2/powerdomain.h | 2 +-
arch/arm/plat-omap/include/plat/omap-pm.h | 4 ++--
arch/arm/plat-omap/include/plat/omap_device.h | 2 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +-
arch/arm/plat-omap/omap-pm-noop.c | 24 +++++++++++++++++-------
arch/arm/plat-omap/omap_device.c | 2 +-
8 files changed, 34 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e034294..4f0d554 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2332,7 +2332,7 @@ ohsps_unlock:
* Returns the context loss count of the powerdomain assocated with @oh
* upon success, or zero if no powerdomain exists for @oh.
*/
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
{
struct powerdomain *pwrdm;
int ret = 0;
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 9af0847..9d53a34 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -935,16 +935,16 @@ int pwrdm_post_transition(void)
* @pwrdm: struct powerdomain * to wait for
*
* Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter. Returns 0
+ * logic off counter and the per-bank memory off counter. Returns negative
* (and WARNs) upon error, otherwise, returns the context loss count.
*/
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
{
int i, count;
if (!pwrdm) {
WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
- return 0;
+ return -ENODEV;
}
count = pwrdm->state_counter[PWRDM_POWER_OFF];
@@ -953,7 +953,13 @@ u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
for (i = 0; i < pwrdm->banks; i++)
count += pwrdm->ret_mem_off_counter[i];
- pr_debug("powerdomain: %s: context loss count = %u\n",
+ /*
+ * Context loss count has to be a non-negative value. Clear the sign
+ * bit to get a value range from 0 to INT_MAX.
+ */
+ count &= INT_MAX;
+
+ pr_debug("powerdomain: %s: context loss count = %d\n",
pwrdm->name, count);
return count;
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index d23d979..012827f 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -207,7 +207,7 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
int pwrdm_pre_transition(void);
int pwrdm_post_transition(void);
int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
extern void omap2xxx_powerdomains_init(void);
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index c0a7520..68df031 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -350,9 +350,9 @@ unsigned long omap_pm_cpu_get_freq(void);
* driver must restore device context. If the number of context losses
* exceeds the maximum positive integer, the function will wrap to 0 and
* continue counting. Returns the number of context losses for this device,
- * or zero upon error.
+ * or negative value upon error.
*/
-u32 omap_pm_get_dev_context_loss_count(struct device *dev);
+int omap_pm_get_dev_context_loss_count(struct device *dev);
void omap_pm_enable_off_mode(void);
void omap_pm_disable_off_mode(void);
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index e4c349f..70d31d0 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -107,7 +107,7 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od);
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-u32 omap_device_get_context_loss_count(struct platform_device *pdev);
+int omap_device_get_context_loss_count(struct platform_device *pdev);
/* Other */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1adea9c..8658e2d 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -598,7 +598,7 @@ int omap_hwmod_for_each_by_class(const char *classname,
void *user);
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index b0471bb2..3dc3801 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -27,7 +27,7 @@
#include <plat/omap_device.h>
static bool off_mode_enabled;
-static u32 dummy_context_loss_counter;
+static int dummy_context_loss_counter;
/*
* Device-driver-originated constraints (via board-*.c files)
@@ -311,22 +311,32 @@ void omap_pm_disable_off_mode(void)
#ifdef CONFIG_ARCH_OMAP2PLUS
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- u32 count;
+ int count;
if (WARN_ON(!dev))
- return 0;
+ return -ENODEV;
if (dev->parent = &omap_device_parent) {
count = omap_device_get_context_loss_count(pdev);
} else {
WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
dev_name(dev));
- if (off_mode_enabled)
- dummy_context_loss_counter++;
+
count = dummy_context_loss_counter;
+
+ if (off_mode_enabled) {
+ count++;
+ /*
+ * Context loss count has to be a non-negative value.
+ * Clear the sign bit to get a value range from 0 to
+ * INT_MAX.
+ */
+ count &= INT_MAX;
+ dummy_context_loss_counter = count;
+ }
}
pr_debug("OMAP PM: context loss count for dev %s = %d\n",
@@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev)
#else
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
{
return dummy_context_loss_counter;
}
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 9bbda9a..9753f71 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -310,7 +310,7 @@ static void _add_optional_clock_clkdev(struct omap_device *od,
* return the context loss counter for that hwmod, otherwise return
* zero.
*/
-u32 omap_device_get_context_loss_count(struct platform_device *pdev)
+int omap_device_get_context_loss_count(struct platform_device *pdev)
{
struct omap_device *od;
u32 ret = 0;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-09 13:56 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Tomi Valkeinen
@ 2011-06-13 9:51 ` Tomi Valkeinen
2011-06-13 16:37 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Ghongdemath, Girish
2011-06-14 7:13 ` Paul Walmsley
2011-08-21 6:19 ` Paul Walmsley
2011-10-06 23:11 ` Paul Walmsley
2 siblings, 2 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-13 9:51 UTC (permalink / raw)
To: paul; +Cc: linux-fbdev, b-cousson, khilman, linux-omap mailing list
Paul, can you take this patch and queue it for an rc?
Tomi
On Thu, 2011-06-09 at 16:56 +0300, Tomi Valkeinen wrote:
> get_context_loss_count functions return context loss count as u32, and
> zero means an error. However, zero is also returned when context has
> never been lost and could also be returned when the context loss count
> has wrapped and goes to zero.
>
> Change the functions to return an int, with negative value meaning an
> error.
>
> OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the
> hsmmc code handles the returned value as an int, with negative value
> meaning an error, this patch actually fixes hsmmc code also.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Acked-by: Kevin Hilman <khilman@ti.com>
> ---
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/powerdomain.c | 14 ++++++++++----
> arch/arm/mach-omap2/powerdomain.h | 2 +-
> arch/arm/plat-omap/include/plat/omap-pm.h | 4 ++--
> arch/arm/plat-omap/include/plat/omap_device.h | 2 +-
> arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +-
> arch/arm/plat-omap/omap-pm-noop.c | 24 +++++++++++++++++-------
> arch/arm/plat-omap/omap_device.c | 2 +-
> 8 files changed, 34 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index e034294..4f0d554 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -2332,7 +2332,7 @@ ohsps_unlock:
> * Returns the context loss count of the powerdomain assocated with @oh
> * upon success, or zero if no powerdomain exists for @oh.
> */
> -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
> +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
> {
> struct powerdomain *pwrdm;
> int ret = 0;
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index 9af0847..9d53a34 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -935,16 +935,16 @@ int pwrdm_post_transition(void)
> * @pwrdm: struct powerdomain * to wait for
> *
> * Context loss count is the sum of powerdomain off-mode counter, the
> - * logic off counter and the per-bank memory off counter. Returns 0
> + * logic off counter and the per-bank memory off counter. Returns negative
> * (and WARNs) upon error, otherwise, returns the context loss count.
> */
> -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
> +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
> {
> int i, count;
>
> if (!pwrdm) {
> WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
> - return 0;
> + return -ENODEV;
> }
>
> count = pwrdm->state_counter[PWRDM_POWER_OFF];
> @@ -953,7 +953,13 @@ u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
> for (i = 0; i < pwrdm->banks; i++)
> count += pwrdm->ret_mem_off_counter[i];
>
> - pr_debug("powerdomain: %s: context loss count = %u\n",
> + /*
> + * Context loss count has to be a non-negative value. Clear the sign
> + * bit to get a value range from 0 to INT_MAX.
> + */
> + count &= INT_MAX;
> +
> + pr_debug("powerdomain: %s: context loss count = %d\n",
> pwrdm->name, count);
>
> return count;
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index d23d979..012827f 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -207,7 +207,7 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
> int pwrdm_pre_transition(void);
> int pwrdm_post_transition(void);
> int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
> -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
> +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
> bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
>
> extern void omap2xxx_powerdomains_init(void);
> diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
> index c0a7520..68df031 100644
> --- a/arch/arm/plat-omap/include/plat/omap-pm.h
> +++ b/arch/arm/plat-omap/include/plat/omap-pm.h
> @@ -350,9 +350,9 @@ unsigned long omap_pm_cpu_get_freq(void);
> * driver must restore device context. If the number of context losses
> * exceeds the maximum positive integer, the function will wrap to 0 and
> * continue counting. Returns the number of context losses for this device,
> - * or zero upon error.
> + * or negative value upon error.
> */
> -u32 omap_pm_get_dev_context_loss_count(struct device *dev);
> +int omap_pm_get_dev_context_loss_count(struct device *dev);
>
> void omap_pm_enable_off_mode(void);
> void omap_pm_disable_off_mode(void);
> diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
> index e4c349f..70d31d0 100644
> --- a/arch/arm/plat-omap/include/plat/omap_device.h
> +++ b/arch/arm/plat-omap/include/plat/omap_device.h
> @@ -107,7 +107,7 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od);
> int omap_device_align_pm_lat(struct platform_device *pdev,
> u32 new_wakeup_lat_limit);
> struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
> -u32 omap_device_get_context_loss_count(struct platform_device *pdev);
> +int omap_device_get_context_loss_count(struct platform_device *pdev);
>
> /* Other */
>
> diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
> index 1adea9c..8658e2d 100644
> --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
> +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
> @@ -598,7 +598,7 @@ int omap_hwmod_for_each_by_class(const char *classname,
> void *user);
>
> int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
> -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
> +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
>
> int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
>
> diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
> index b0471bb2..3dc3801 100644
> --- a/arch/arm/plat-omap/omap-pm-noop.c
> +++ b/arch/arm/plat-omap/omap-pm-noop.c
> @@ -27,7 +27,7 @@
> #include <plat/omap_device.h>
>
> static bool off_mode_enabled;
> -static u32 dummy_context_loss_counter;
> +static int dummy_context_loss_counter;
>
> /*
> * Device-driver-originated constraints (via board-*.c files)
> @@ -311,22 +311,32 @@ void omap_pm_disable_off_mode(void)
>
> #ifdef CONFIG_ARCH_OMAP2PLUS
>
> -u32 omap_pm_get_dev_context_loss_count(struct device *dev)
> +int omap_pm_get_dev_context_loss_count(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> - u32 count;
> + int count;
>
> if (WARN_ON(!dev))
> - return 0;
> + return -ENODEV;
>
> if (dev->parent = &omap_device_parent) {
> count = omap_device_get_context_loss_count(pdev);
> } else {
> WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
> dev_name(dev));
> - if (off_mode_enabled)
> - dummy_context_loss_counter++;
> +
> count = dummy_context_loss_counter;
> +
> + if (off_mode_enabled) {
> + count++;
> + /*
> + * Context loss count has to be a non-negative value.
> + * Clear the sign bit to get a value range from 0 to
> + * INT_MAX.
> + */
> + count &= INT_MAX;
> + dummy_context_loss_counter = count;
> + }
> }
>
> pr_debug("OMAP PM: context loss count for dev %s = %d\n",
> @@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev)
>
> #else
>
> -u32 omap_pm_get_dev_context_loss_count(struct device *dev)
> +int omap_pm_get_dev_context_loss_count(struct device *dev)
> {
> return dummy_context_loss_counter;
> }
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index 9bbda9a..9753f71 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -310,7 +310,7 @@ static void _add_optional_clock_clkdev(struct omap_device *od,
> * return the context loss counter for that hwmod, otherwise return
> * zero.
> */
> -u32 omap_device_get_context_loss_count(struct platform_device *pdev)
> +int omap_device_get_context_loss_count(struct platform_device *pdev)
> {
> struct omap_device *od;
> u32 ret = 0;
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int
2011-06-13 9:51 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value Tomi Valkeinen
@ 2011-06-13 16:37 ` Ghongdemath, Girish
2011-06-13 16:45 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value Tomi Valkeinen
2011-06-14 7:13 ` Paul Walmsley
1 sibling, 1 reply; 54+ messages in thread
From: Ghongdemath, Girish @ 2011-06-13 16:37 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: paul, linux-fbdev, b-cousson, khilman, linux-omap mailing list
Tomi,
Couple of queries,
On Mon, Jun 13, 2011 at 4:51 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> Paul, can you take this patch and queue it for an rc?
>
> Tomi
>
> On Thu, 2011-06-09 at 16:56 +0300, Tomi Valkeinen wrote:
>> get_context_loss_count functions return context loss count as u32, and
>> zero means an error. However, zero is also returned when context has
>> never been lost and could also be returned when the context loss count
>> has wrapped and goes to zero.
>>
>> Change the functions to return an int, with negative value meaning an
>> error.
>>
>> + if (off_mode_enabled) {
- why have a check for off_mode_enabled? As this only detects valid
next state for MPU/CORE. Other pwrdm can still
hit OFF.
>> + count++;
>> + /*
>> + * Context loss count has to be a non-negative value.
>> + * Clear the sign bit to get a value range from 0 to
>> + * INT_MAX.
>> + */
>> + count &= INT_MAX;
>> + dummy_context_loss_counter = count;
>> + }
>> }
- Why not use u32 instead?
Regards,
Girish
>>
>> pr_debug("OMAP PM: context loss count for dev %s = %d\n",
>> @@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev)
>>
>> #else
>>
>> -u32 omap_pm_get_dev_context_loss_count(struct device *dev)
>> +int omap_pm_get_dev_context_loss_count(struct device *dev)
>> {
>> return dummy_context_loss_counter;
>> }
>> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
>> index 9bbda9a..9753f71 100644
>> --- a/arch/arm/plat-omap/omap_device.c
>> +++ b/arch/arm/plat-omap/omap_device.c
>> @@ -310,7 +310,7 @@ static void _add_optional_clock_clkdev(struct omap_device *od,
>> * return the context loss counter for that hwmod, otherwise return
>> * zero.
>> */
>> -u32 omap_device_get_context_loss_count(struct platform_device *pdev)
>> +int omap_device_get_context_loss_count(struct platform_device *pdev)
>> {
>> struct omap_device *od;
>> u32 ret = 0;
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-13 16:37 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Ghongdemath, Girish
@ 2011-06-13 16:45 ` Tomi Valkeinen
0 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-13 16:45 UTC (permalink / raw)
To: Ghongdemath, Girish
Cc: paul, linux-fbdev, b-cousson, khilman, linux-omap mailing list
On Mon, 2011-06-13 at 11:37 -0500, Ghongdemath, Girish wrote:
> Tomi,
> Couple of queries,
>
> On Mon, Jun 13, 2011 at 4:51 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> > Paul, can you take this patch and queue it for an rc?
> >
> > Tomi
> >
> > On Thu, 2011-06-09 at 16:56 +0300, Tomi Valkeinen wrote:
> >> get_context_loss_count functions return context loss count as u32, and
> >> zero means an error. However, zero is also returned when context has
> >> never been lost and could also be returned when the context loss count
> >> has wrapped and goes to zero.
> >>
> >> Change the functions to return an int, with negative value meaning an
> >> error.
> >>
>
> >> + if (off_mode_enabled) {
>
> - why have a check for off_mode_enabled? As this only detects valid
> next state for MPU/CORE. Other pwrdm can still
> hit OFF.
It does what the code did previously, without changing the logic. And
this doesn't detect anything, it's just an dummy emulation for context
loss to test the drivers.
> >> + count++;
> >> + /*
> >> + * Context loss count has to be a non-negative value.
> >> + * Clear the sign bit to get a value range from 0 to
> >> + * INT_MAX.
> >> + */
> >> + count &= INT_MAX;
> >> + dummy_context_loss_counter = count;
> >> + }
> >> }
>
> - Why not use u32 instead?
So that we can return error values. That was the whole point of this
patch.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-13 9:51 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value Tomi Valkeinen
2011-06-13 16:37 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Ghongdemath, Girish
@ 2011-06-14 7:13 ` Paul Walmsley
2011-06-14 7:24 ` Tomi Valkeinen
1 sibling, 1 reply; 54+ messages in thread
From: Paul Walmsley @ 2011-06-14 7:13 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-fbdev, b-cousson, khilman, linux-omap mailing list
Hi Tomi
On Mon, 13 Jun 2011, Tomi Valkeinen wrote:
> Paul, can you take this patch and queue it for an rc?
Generally I only queue regressions or fixes for major problems (crashes,
corruption, etc.) for -rc series. So probably this one should go in via
the normal merge window, unless it's been causing major disruptions?
- Paul
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-14 7:13 ` Paul Walmsley
@ 2011-06-14 7:24 ` Tomi Valkeinen
2011-06-14 13:55 ` Rajendra Nayak
0 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-14 7:24 UTC (permalink / raw)
To: Paul Walmsley; +Cc: linux-fbdev, b-cousson, khilman, linux-omap mailing list
On Tue, 2011-06-14 at 01:13 -0600, Paul Walmsley wrote:
> Hi Tomi
>
> On Mon, 13 Jun 2011, Tomi Valkeinen wrote:
>
> > Paul, can you take this patch and queue it for an rc?
>
> Generally I only queue regressions or fixes for major problems (crashes,
> corruption, etc.) for -rc series. So probably this one should go in via
> the normal merge window, unless it's been causing major disruptions?
No, only disruptions for me as the DSS pm_runtime patches depend on this
one to function correctly. So merge window is ok, I'll handle the DSS
side somehow.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-14 7:24 ` Tomi Valkeinen
@ 2011-06-14 13:55 ` Rajendra Nayak
2011-06-15 9:19 ` Rajendra Nayak
0 siblings, 1 reply; 54+ messages in thread
From: Rajendra Nayak @ 2011-06-14 13:55 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Paul Walmsley, linux-fbdev, b-cousson, khilman,
linux-omap mailing list
On 6/14/2011 12:54 PM, Tomi Valkeinen wrote:
> On Tue, 2011-06-14 at 01:13 -0600, Paul Walmsley wrote:
>> Hi Tomi
>>
>> On Mon, 13 Jun 2011, Tomi Valkeinen wrote:
>>
>>> Paul, can you take this patch and queue it for an rc?
>>
>> Generally I only queue regressions or fixes for major problems (crashes,
>> corruption, etc.) for -rc series. So probably this one should go in via
>> the normal merge window, unless it's been causing major disruptions?
>
> No, only disruptions for me as the DSS pm_runtime patches depend on this
> one to function correctly. So merge window is ok, I'll handle the DSS
> side somehow.
Hi Paul/Kevin,
I had a query, not directly related to this patch, but to the way
the omap_pm_get_dev_context_loss_count() api is implemented, which
this patch is trying to fix in some ways.
I see that the api relies on the pwrdm level state counters, which
in-turn seem to be getting updated only in the cpuidle/suspend path.
How are domains like DSS which can independently transition outside
of the cpuidle path handled?
What I mean is, if DSS on disabling its clocks transitions to OFF
state (it being an independent powerdomain) and tries to use this api
to know if it lost context the next time it is re-enabling clocks and
all this happens while there was no cpuidle being scheduled, where do
the pwrdm level state counters get updated, which tell DSS it did lose
context?
On another note, i was wondering if it even made any sense to drivers
like DSS, which have an independent power domain of its own on OMAP to
try and do a restore-only-if-needed kind of an implementation.
Would'nt it always lose context the moment it run-time idle's?
regards,
Rajendra
>
> Tomi
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-14 13:55 ` Rajendra Nayak
@ 2011-06-15 9:19 ` Rajendra Nayak
0 siblings, 0 replies; 54+ messages in thread
From: Rajendra Nayak @ 2011-06-15 9:19 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Paul Walmsley, linux-fbdev, b-cousson, khilman,
linux-omap mailing list
On 6/14/2011 7:24 PM, Rajendra Nayak wrote:
> On 6/14/2011 12:54 PM, Tomi Valkeinen wrote:
>> On Tue, 2011-06-14 at 01:13 -0600, Paul Walmsley wrote:
>>> Hi Tomi
>>>
>>> On Mon, 13 Jun 2011, Tomi Valkeinen wrote:
>>>
>>>> Paul, can you take this patch and queue it for an rc?
>>>
>>> Generally I only queue regressions or fixes for major problems (crashes,
>>> corruption, etc.) for -rc series. So probably this one should go in via
>>> the normal merge window, unless it's been causing major disruptions?
>>
>> No, only disruptions for me as the DSS pm_runtime patches depend on this
>> one to function correctly. So merge window is ok, I'll handle the DSS
>> side somehow.
>
> Hi Paul/Kevin,
>
> I had a query, not directly related to this patch, but to the way
> the omap_pm_get_dev_context_loss_count() api is implemented, which
> this patch is trying to fix in some ways.
> I see that the api relies on the pwrdm level state counters, which
> in-turn seem to be getting updated only in the cpuidle/suspend path.
> How are domains like DSS which can independently transition outside
> of the cpuidle path handled?
Thinking some more on this, maybe I now understand how this worked
on OMAP3. We always had the 'autodeps' on OMAP3 which made sure no
clkdm idle's while MPU is not in standby, and hence all transitions
would always happen between the pwrdm_pre_transition() and
pwrdm_post_transition() (where the pwrdm level state counters get
cleared/updated) callbacks. So there were really no domain
transitions outside of this on OMAP3.
My questions were popping out from the work I was trying to do to
support this on OMAP4, and with no 'autodeps' on OMAP4 there will
be transitions outside of cpuidle/suspend where counters need
to be updated/cleared which at this point I have no clue how to
handle :(
I will start a separate discussion/thread on this since
this is probably not the right place to discuss on how to do
this on OMAP4.
Thanks,
Rajendra
> What I mean is, if DSS on disabling its clocks transitions to OFF
> state (it being an independent powerdomain) and tries to use this api
> to know if it lost context the next time it is re-enabling clocks and
> all this happens while there was no cpuidle being scheduled, where do
> the pwrdm level state counters get updated, which tell DSS it did lose
> context?
>
> On another note, i was wondering if it even made any sense to drivers
> like DSS, which have an independent power domain of its own on OMAP to
> try and do a restore-only-if-needed kind of an implementation.
> Would'nt it always lose context the moment it run-time idle's?
>
> regards,
> Rajendra
>
>>
>> Tomi
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-09 13:56 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Tomi Valkeinen
2011-06-13 9:51 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value Tomi Valkeinen
@ 2011-08-21 6:19 ` Paul Walmsley
2011-10-06 23:11 ` Paul Walmsley
2 siblings, 0 replies; 54+ messages in thread
From: Paul Walmsley @ 2011-08-21 6:19 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
> get_context_loss_count functions return context loss count as u32, and
> zero means an error. However, zero is also returned when context has
> never been lost and could also be returned when the context loss count
> has wrapped and goes to zero.
>
> Change the functions to return an int, with negative value meaning an
> error.
>
> OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the
> hsmmc code handles the returned value as an int, with negative value
> meaning an error, this patch actually fixes hsmmc code also.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Acked-by: Kevin Hilman <khilman@ti.com>
Thanks, queued for 3.2 fixes.
- Paul
> ---
> arch/arm/mach-omap2/omap_hwmod.c | 2 +-
> arch/arm/mach-omap2/powerdomain.c | 14 ++++++++++----
> arch/arm/mach-omap2/powerdomain.h | 2 +-
> arch/arm/plat-omap/include/plat/omap-pm.h | 4 ++--
> arch/arm/plat-omap/include/plat/omap_device.h | 2 +-
> arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +-
> arch/arm/plat-omap/omap-pm-noop.c | 24 +++++++++++++++++-------
> arch/arm/plat-omap/omap_device.c | 2 +-
> 8 files changed, 34 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
> index e034294..4f0d554 100644
> --- a/arch/arm/mach-omap2/omap_hwmod.c
> +++ b/arch/arm/mach-omap2/omap_hwmod.c
> @@ -2332,7 +2332,7 @@ ohsps_unlock:
> * Returns the context loss count of the powerdomain assocated with @oh
> * upon success, or zero if no powerdomain exists for @oh.
> */
> -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
> +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
> {
> struct powerdomain *pwrdm;
> int ret = 0;
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index 9af0847..9d53a34 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -935,16 +935,16 @@ int pwrdm_post_transition(void)
> * @pwrdm: struct powerdomain * to wait for
> *
> * Context loss count is the sum of powerdomain off-mode counter, the
> - * logic off counter and the per-bank memory off counter. Returns 0
> + * logic off counter and the per-bank memory off counter. Returns negative
> * (and WARNs) upon error, otherwise, returns the context loss count.
> */
> -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
> +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
> {
> int i, count;
>
> if (!pwrdm) {
> WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
> - return 0;
> + return -ENODEV;
> }
>
> count = pwrdm->state_counter[PWRDM_POWER_OFF];
> @@ -953,7 +953,13 @@ u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
> for (i = 0; i < pwrdm->banks; i++)
> count += pwrdm->ret_mem_off_counter[i];
>
> - pr_debug("powerdomain: %s: context loss count = %u\n",
> + /*
> + * Context loss count has to be a non-negative value. Clear the sign
> + * bit to get a value range from 0 to INT_MAX.
> + */
> + count &= INT_MAX;
> +
> + pr_debug("powerdomain: %s: context loss count = %d\n",
> pwrdm->name, count);
>
> return count;
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index d23d979..012827f 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -207,7 +207,7 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
> int pwrdm_pre_transition(void);
> int pwrdm_post_transition(void);
> int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
> -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
> +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
> bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
>
> extern void omap2xxx_powerdomains_init(void);
> diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
> index c0a7520..68df031 100644
> --- a/arch/arm/plat-omap/include/plat/omap-pm.h
> +++ b/arch/arm/plat-omap/include/plat/omap-pm.h
> @@ -350,9 +350,9 @@ unsigned long omap_pm_cpu_get_freq(void);
> * driver must restore device context. If the number of context losses
> * exceeds the maximum positive integer, the function will wrap to 0 and
> * continue counting. Returns the number of context losses for this device,
> - * or zero upon error.
> + * or negative value upon error.
> */
> -u32 omap_pm_get_dev_context_loss_count(struct device *dev);
> +int omap_pm_get_dev_context_loss_count(struct device *dev);
>
> void omap_pm_enable_off_mode(void);
> void omap_pm_disable_off_mode(void);
> diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
> index e4c349f..70d31d0 100644
> --- a/arch/arm/plat-omap/include/plat/omap_device.h
> +++ b/arch/arm/plat-omap/include/plat/omap_device.h
> @@ -107,7 +107,7 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od);
> int omap_device_align_pm_lat(struct platform_device *pdev,
> u32 new_wakeup_lat_limit);
> struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
> -u32 omap_device_get_context_loss_count(struct platform_device *pdev);
> +int omap_device_get_context_loss_count(struct platform_device *pdev);
>
> /* Other */
>
> diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
> index 1adea9c..8658e2d 100644
> --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
> +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
> @@ -598,7 +598,7 @@ int omap_hwmod_for_each_by_class(const char *classname,
> void *user);
>
> int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
> -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
> +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
>
> int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
>
> diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
> index b0471bb2..3dc3801 100644
> --- a/arch/arm/plat-omap/omap-pm-noop.c
> +++ b/arch/arm/plat-omap/omap-pm-noop.c
> @@ -27,7 +27,7 @@
> #include <plat/omap_device.h>
>
> static bool off_mode_enabled;
> -static u32 dummy_context_loss_counter;
> +static int dummy_context_loss_counter;
>
> /*
> * Device-driver-originated constraints (via board-*.c files)
> @@ -311,22 +311,32 @@ void omap_pm_disable_off_mode(void)
>
> #ifdef CONFIG_ARCH_OMAP2PLUS
>
> -u32 omap_pm_get_dev_context_loss_count(struct device *dev)
> +int omap_pm_get_dev_context_loss_count(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> - u32 count;
> + int count;
>
> if (WARN_ON(!dev))
> - return 0;
> + return -ENODEV;
>
> if (dev->parent = &omap_device_parent) {
> count = omap_device_get_context_loss_count(pdev);
> } else {
> WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
> dev_name(dev));
> - if (off_mode_enabled)
> - dummy_context_loss_counter++;
> +
> count = dummy_context_loss_counter;
> +
> + if (off_mode_enabled) {
> + count++;
> + /*
> + * Context loss count has to be a non-negative value.
> + * Clear the sign bit to get a value range from 0 to
> + * INT_MAX.
> + */
> + count &= INT_MAX;
> + dummy_context_loss_counter = count;
> + }
> }
>
> pr_debug("OMAP PM: context loss count for dev %s = %d\n",
> @@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev)
>
> #else
>
> -u32 omap_pm_get_dev_context_loss_count(struct device *dev)
> +int omap_pm_get_dev_context_loss_count(struct device *dev)
> {
> return dummy_context_loss_counter;
> }
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index 9bbda9a..9753f71 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -310,7 +310,7 @@ static void _add_optional_clock_clkdev(struct omap_device *od,
> * return the context loss counter for that hwmod, otherwise return
> * zero.
> */
> -u32 omap_device_get_context_loss_count(struct platform_device *pdev)
> +int omap_device_get_context_loss_count(struct platform_device *pdev)
> {
> struct omap_device *od;
> u32 ret = 0;
> --
> 1.7.4.1
>
- Paul
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-06-09 13:56 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Tomi Valkeinen
2011-06-13 9:51 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value Tomi Valkeinen
2011-08-21 6:19 ` Paul Walmsley
@ 2011-10-06 23:11 ` Paul Walmsley
2011-10-06 23:14 ` Tony Lindgren
2 siblings, 1 reply; 54+ messages in thread
From: Paul Walmsley @ 2011-10-06 23:11 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
> get_context_loss_count functions return context loss count as u32, and
> zero means an error. However, zero is also returned when context has
> never been lost and could also be returned when the context loss count
> has wrapped and goes to zero.
>
> Change the functions to return an int, with negative value meaning an
> error.
>
> OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the
> hsmmc code handles the returned value as an int, with negative value
> meaning an error, this patch actually fixes hsmmc code also.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Acked-by: Kevin Hilman <khilman@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>>
- Paul
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 01/28] OMAP: change get_context_loss_count ret value
2011-10-06 23:11 ` Paul Walmsley
@ 2011-10-06 23:14 ` Tony Lindgren
0 siblings, 0 replies; 54+ messages in thread
From: Tony Lindgren @ 2011-10-06 23:14 UTC (permalink / raw)
To: Paul Walmsley; +Cc: Tomi Valkeinen, linux-omap, linux-fbdev, b-cousson, khilman
* Paul Walmsley <paul@pwsan.com> [111006 15:37]:
> On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
>
> > get_context_loss_count functions return context loss count as u32, and
> > zero means an error. However, zero is also returned when context has
> > never been lost and could also be returned when the context loss count
> > has wrapped and goes to zero.
> >
> > Change the functions to return an int, with negative value meaning an
> > error.
> >
> > OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the
> > hsmmc code handles the returned value as an int, with negative value
> > meaning an error, this patch actually fixes hsmmc code also.
> >
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Acked-by: Kevin Hilman <khilman@ti.com>
>
> Acked-by: Paul Walmsley <paul@pwsan.com>>
Thanks, picking this into fixes-part2 branch as requested by Paul.
Tony
^ permalink raw reply [flat|nested] 54+ messages in thread
* [PATCHv2 02/28] OMAP: DSS2: Taal: Make driver more fault tolerant
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 03/28] OMAP: DSS2: Reset LANEx_ULPS_SIG2 bits after use Tomi Valkeinen
` (26 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
If ULPS exit fails, and the following reset fails also, Taal driver was
left in state where it thinks DSI is enabled while it really isn't,
leading to crash.
This patch checks the return value of taal_panel_reset, and if that
fails, ulps_enabled is left true, causing the driver to retry ulps exit
later.
Also the return value of taal_wake_up is checked at taal_disable, and if
wake up fails, we'll skip the power_off. This could leave the panel into
a not-quite-valid state, but there's nothing we can do about it in that
situation.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-taal.c | 33 ++++++++++++++++++----------
1 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index fdd5d4ae..b82bcc1 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -504,14 +504,18 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
return 0;
r = omapdss_dsi_display_enable(dssdev);
- if (r)
- goto err;
+ if (r) {
+ dev_err(&dssdev->dev, "failed to enable DSI\n");
+ goto err1;
+ }
omapdss_dsi_vc_enable_hs(dssdev, td->channel, true);
r = _taal_enable_te(dssdev, true);
- if (r)
- goto err;
+ if (r) {
+ dev_err(&dssdev->dev, "failed to re-enable TE");
+ goto err2;
+ }
enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
@@ -521,13 +525,15 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
return 0;
-err:
- dev_err(&dssdev->dev, "exit ULPS failed");
- r = taal_panel_reset(dssdev);
-
- enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
- td->ulps_enabled = false;
+err2:
+ dev_err(&dssdev->dev, "failed to exit ULPS");
+ r = taal_panel_reset(dssdev);
+ if (!r) {
+ enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ td->ulps_enabled = false;
+ }
+err1:
taal_queue_ulps_work(dssdev);
return r;
@@ -1317,8 +1323,11 @@ static void taal_disable(struct omap_dss_device *dssdev)
dsi_bus_lock(dssdev);
if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE) {
- taal_wake_up(dssdev);
- taal_power_off(dssdev);
+ int r;
+
+ r = taal_wake_up(dssdev);
+ if (!r)
+ taal_power_off(dssdev);
}
dsi_bus_unlock(dssdev);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 03/28] OMAP: DSS2: Reset LANEx_ULPS_SIG2 bits after use
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 01/28] OMAP: change get_context_loss_count ret value to int Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 02/28] OMAP: DSS2: Taal: Make driver more fault tolerant Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 04/28] OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks Tomi Valkeinen
` (25 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
LANEx_ULPS_SIG2 bits are left on after entering ULPS. This doesn't cause
any problems currently, as DSI HW is reset when it is enabled. However,
if the reset is not done, operation fails if the bits are still set.
So reset the bits after entering ULPS to ensure operation even without
HW reset.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dsi.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 69c2d4f..4496d09 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3395,6 +3395,10 @@ static int dsi_enter_ulps(struct platform_device *dsidev)
dsi_unregister_isr_cio(dsidev, dsi_completion_handler, &completion,
DSI_CIO_IRQ_ULPSACTIVENOT_ALL0);
+ /* Reset LANEx_ULPS_SIG2 */
+ REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (0 << 0) | (0 << 1) | (0 << 2),
+ 7, 5);
+
dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ULPS);
dsi_if_enable(dsidev, false);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 04/28] OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (2 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 03/28] OMAP: DSS2: Reset LANEx_ULPS_SIG2 bits after use Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 05/28] OMAP: DSS2: Clean up probe for DSS & DSI Tomi Valkeinen
` (24 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Get and put for dpll4_m4_ck was handled in dss_init/dss_exit. Move the
code to dss_get/put_clocks(), which is a better place to handle it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dss.c | 52 ++++++++++++++++++++--------------------
1 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index d0b3f81..bcd4a07 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -669,7 +669,6 @@ static int dss_init(void)
int r;
u32 rev;
struct resource *dss_mem;
- struct clk *dpll4_m4_ck;
dss_mem = platform_get_resource(dss.pdev, IORESOURCE_MEM, 0);
if (!dss_mem) {
@@ -715,26 +714,6 @@ static int dss_init(void)
REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */
REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */
#endif
- if (cpu_is_omap34xx()) {
- dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck");
- if (IS_ERR(dpll4_m4_ck)) {
- DSSERR("Failed to get dpll4_m4_ck\n");
- r = PTR_ERR(dpll4_m4_ck);
- goto fail1;
- }
- } else if (cpu_is_omap44xx()) {
- dpll4_m4_ck = clk_get(NULL, "dpll_per_m5x2_ck");
- if (IS_ERR(dpll4_m4_ck)) {
- DSSERR("Failed to get dpll4_m4_ck\n");
- r = PTR_ERR(dpll4_m4_ck);
- goto fail1;
- }
- } else { /* omap24xx */
- dpll4_m4_ck = NULL;
- }
-
- dss.dpll4_m4_ck = dpll4_m4_ck;
-
dss.dsi_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
dss.dsi_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
dss.dispc_clk_source = OMAP_DSS_CLK_SRC_FCK;
@@ -749,17 +728,12 @@ static int dss_init(void)
return 0;
-fail1:
- iounmap(dss.base);
fail0:
return r;
}
static void dss_exit(void)
{
- if (dss.dpll4_m4_ck)
- clk_put(dss.dpll4_m4_ck);
-
iounmap(dss.base);
}
@@ -845,6 +819,7 @@ static int dss_get_clock(struct clk **clock, const char *clk_name)
static int dss_get_clocks(void)
{
int r;
+ struct clk *dpll4_m4_ck;
struct omap_display_platform_data *pdata = dss.pdev->dev.platform_data;
dss.dss_ick = NULL;
@@ -884,6 +859,27 @@ static int dss_get_clocks(void)
goto err;
}
+ if (cpu_is_omap34xx()) {
+ dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck");
+ if (IS_ERR(dpll4_m4_ck)) {
+ DSSERR("Failed to get dpll4_m4_ck\n");
+ r = PTR_ERR(dpll4_m4_ck);
+ goto err;
+ }
+ } else if (cpu_is_omap44xx()) {
+ dpll4_m4_ck = clk_get(NULL, "dpll_per_m5x2_ck");
+ if (IS_ERR(dpll4_m4_ck)) {
+ DSSERR("Failed to get dpll_per_m5x2_ck\n");
+ r = PTR_ERR(dpll4_m4_ck);
+ goto err;
+ }
+ } else { /* omap24xx */
+ dpll4_m4_ck = NULL;
+ }
+
+ dss.dpll4_m4_ck = dpll4_m4_ck;
+
+
return 0;
err:
@@ -897,12 +893,16 @@ err:
clk_put(dss.dss_tv_fck);
if (dss.dss_video_fck)
clk_put(dss.dss_video_fck);
+ if (dss.dpll4_m4_ck)
+ clk_put(dss.dpll4_m4_ck);
return r;
}
static void dss_put_clocks(void)
{
+ if (dss.dpll4_m4_ck)
+ clk_put(dss.dpll4_m4_ck);
if (dss.dss_video_fck)
clk_put(dss.dss_video_fck);
if (dss.dss_tv_fck)
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 05/28] OMAP: DSS2: Clean up probe for DSS & DSI
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (3 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 04/28] OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 06/28] OMAP: DSS2: Init dispc first before other components Tomi Valkeinen
` (23 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Both dss.c and dsi.c had a probe function, which was almost a dummy one,
calling dss_init() and dsi_init().
Remove the init functions by moving the initialization code into probe
functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dsi.c | 30 ++-------
drivers/video/omap2/dss/dss.c | 145 ++++++++++++++++++-----------------------
2 files changed, 69 insertions(+), 106 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 4496d09..0609885 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4450,7 +4450,8 @@ static void dsi_calc_clock_param_ranges(struct platform_device *dsidev)
dsi->lpdiv_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_LPDIV);
}
-static int dsi_init(struct platform_device *dsidev)
+/* DSI1 HW IP initialisation */
+static int omap_dsi1hw_probe(struct platform_device *dsidev)
{
struct omap_display_platform_data *dss_plat_data;
struct omap_dss_board_info *board_info;
@@ -4547,10 +4548,12 @@ err0:
return r;
}
-static void dsi_exit(struct platform_device *dsidev)
+static int omap_dsi1hw_remove(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ WARN_ON(dsi->scp_clk_refcount > 0);
+
if (dsi->vdds_dsi_reg != NULL) {
if (dsi->vdds_dsi_enabled) {
regulator_disable(dsi->vdds_dsi_reg);
@@ -4566,29 +4569,6 @@ static void dsi_exit(struct platform_device *dsidev)
kfree(dsi);
- DSSDBG("omap_dsi_exit\n");
-}
-
-/* DSI1 HW IP initialisation */
-static int omap_dsi1hw_probe(struct platform_device *dsidev)
-{
- int r;
-
- r = dsi_init(dsidev);
- if (r) {
- DSSERR("Failed to initialize DSI\n");
- goto err_dsi;
- }
-err_dsi:
- return r;
-}
-
-static int omap_dsi1hw_remove(struct platform_device *dsidev)
-{
- struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-
- dsi_exit(dsidev);
- WARN_ON(dsi->scp_clk_refcount > 0);
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index bcd4a07..57ce428 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -664,79 +664,6 @@ void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select hdmi)
REG_FLD_MOD(DSS_CONTROL, hdmi, 15, 15); /* VENC_HDMI_SWITCH */
}
-static int dss_init(void)
-{
- int r;
- u32 rev;
- struct resource *dss_mem;
-
- dss_mem = platform_get_resource(dss.pdev, IORESOURCE_MEM, 0);
- if (!dss_mem) {
- DSSERR("can't get IORESOURCE_MEM DSS\n");
- r = -EINVAL;
- goto fail0;
- }
- dss.base = ioremap(dss_mem->start, resource_size(dss_mem));
- if (!dss.base) {
- DSSERR("can't ioremap DSS\n");
- r = -ENOMEM;
- goto fail0;
- }
-
- /* disable LCD and DIGIT output. This seems to fix the synclost
- * problem that we get, if the bootloader starts the DSS and
- * the kernel resets it */
- omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
-
-#ifdef CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
- /* We need to wait here a bit, otherwise we sometimes start to
- * get synclost errors, and after that only power cycle will
- * restore DSS functionality. I have no idea why this happens.
- * And we have to wait _before_ resetting the DSS, but after
- * enabling clocks.
- *
- * This bug was at least present on OMAP3430. It's unknown
- * if it happens on OMAP2 or OMAP3630.
- */
- msleep(50);
-#endif
-
- _omap_dss_reset();
-
- /* autoidle */
- REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
-
- /* Select DPLL */
- REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
-
-#ifdef CONFIG_OMAP2_DSS_VENC
- REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */
- REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */
- REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */
-#endif
- dss.dsi_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
- dss.dsi_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
- dss.dispc_clk_source = OMAP_DSS_CLK_SRC_FCK;
- dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
- dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
-
- dss_save_context();
-
- rev = dss_read_reg(DSS_REVISION);
- printk(KERN_INFO "OMAP DSS rev %d.%d\n",
- FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
-
- return 0;
-
-fail0:
- return r;
-}
-
-static void dss_exit(void)
-{
- iounmap(dss.base);
-}
-
/* CONTEXT */
static int dss_get_ctx_id(void)
{
@@ -1094,10 +1021,25 @@ void dss_debug_dump_clocks(struct seq_file *s)
/* DSS HW IP initialisation */
static int omap_dsshw_probe(struct platform_device *pdev)
{
+ struct resource *dss_mem;
+ u32 rev;
int r;
dss.pdev = pdev;
+ dss_mem = platform_get_resource(dss.pdev, IORESOURCE_MEM, 0);
+ if (!dss_mem) {
+ DSSERR("can't get IORESOURCE_MEM DSS\n");
+ r = -EINVAL;
+ goto err_ioremap;
+ }
+ dss.base = ioremap(dss_mem->start, resource_size(dss_mem));
+ if (!dss.base) {
+ DSSERR("can't ioremap DSS\n");
+ r = -ENOMEM;
+ goto err_ioremap;
+ }
+
r = dss_get_clocks();
if (r)
goto err_clocks;
@@ -1107,11 +1049,42 @@ static int omap_dsshw_probe(struct platform_device *pdev)
dss.ctx_id = dss_get_ctx_id();
DSSDBG("initial ctx id %u\n", dss.ctx_id);
- r = dss_init();
- if (r) {
- DSSERR("Failed to initialize DSS\n");
- goto err_dss;
- }
+ /* disable LCD and DIGIT output. This seems to fix the synclost
+ * problem that we get, if the bootloader starts the DSS and
+ * the kernel resets it */
+ omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
+
+#ifdef CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
+ /* We need to wait here a bit, otherwise we sometimes start to
+ * get synclost errors, and after that only power cycle will
+ * restore DSS functionality. I have no idea why this happens.
+ * And we have to wait _before_ resetting the DSS, but after
+ * enabling clocks.
+ *
+ * This bug was at least present on OMAP3430. It's unknown
+ * if it happens on OMAP2 or OMAP3630.
+ */
+ msleep(50);
+#endif
+
+ _omap_dss_reset();
+
+ /* autoidle */
+ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
+
+ /* Select DPLL */
+ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */
+ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */
+ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */
+#endif
+ dss.dsi_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
+ dss.dsi_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
+ dss.dispc_clk_source = OMAP_DSS_CLK_SRC_FCK;
+ dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
+ dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
r = dpi_init();
if (r) {
@@ -1125,23 +1098,32 @@ static int omap_dsshw_probe(struct platform_device *pdev)
goto err_sdi;
}
+ dss_save_context();
+
+ rev = dss_read_reg(DSS_REVISION);
+ printk(KERN_INFO "OMAP DSS rev %d.%d\n",
+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
dss_clk_disable_all_no_ctx();
+
return 0;
err_sdi:
dpi_exit();
err_dpi:
- dss_exit();
-err_dss:
dss_clk_disable_all_no_ctx();
dss_put_clocks();
err_clocks:
+ iounmap(dss.base);
+err_ioremap:
return r;
}
static int omap_dsshw_remove(struct platform_device *pdev)
{
+ dpi_exit();
+ sdi_exit();
- dss_exit();
+ iounmap(dss.base);
/*
* As part of hwmod changes, DSS is not the only controller of dss
@@ -1152,6 +1134,7 @@ static int omap_dsshw_remove(struct platform_device *pdev)
WARN_ON(dss.num_clks_enabled > 0);
dss_put_clocks();
+
return 0;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 06/28] OMAP: DSS2: Init dispc first before other components
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (4 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 05/28] OMAP: DSS2: Clean up probe for DSS & DSI Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 07/28] OMAP: DSS2: Remove clk optimization at dss init Tomi Valkeinen
` (22 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
The initialization order of the DSS modules is important when pm_runtime
support is implemented. Currently RFBI is initialized before DISPC,
which will cause problems with pm_runtime as RFBI uses DISPC.
Change the init order so that DISPC is before RFBI.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/core.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 3da4267..02187df 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -185,6 +185,11 @@ static int omap_dss_probe(struct platform_device *pdev)
/* keep clocks enabled to prevent context saves/restores during init */
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ r = dispc_init_platform_driver();
+ if (r) {
+ DSSERR("Failed to initialize dispc platform driver\n");
+ goto err_dispc;
+ }
r = rfbi_init_platform_driver();
if (r) {
@@ -192,12 +197,6 @@ static int omap_dss_probe(struct platform_device *pdev)
goto err_rfbi;
}
- r = dispc_init_platform_driver();
- if (r) {
- DSSERR("Failed to initialize dispc platform driver\n");
- goto err_dispc;
- }
-
r = venc_init_platform_driver();
if (r) {
DSSERR("Failed to initialize venc platform driver\n");
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 07/28] OMAP: DSS2: Remove clk optimization at dss init
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (5 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 06/28] OMAP: DSS2: Init dispc first before other components Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 08/28] OMAP: DSS2: rewrite use of context_loss_count Tomi Valkeinen
` (21 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
DSS enables core clocks for the duration of initialization to avoid
unnecessary context saves and restores.
With PM runtime the clocks cannot be handled in this way, outside the
dss module drivers. Thus we need to remove the optimization.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/core.c | 4 ----
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 02187df..f0bae6d 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -183,8 +183,6 @@ static int omap_dss_probe(struct platform_device *pdev)
goto err_dss;
}
- /* keep clocks enabled to prevent context saves/restores during init */
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
r = dispc_init_platform_driver();
if (r) {
DSSERR("Failed to initialize dispc platform driver\n");
@@ -237,8 +235,6 @@ static int omap_dss_probe(struct platform_device *pdev)
pdata->default_device = dssdev;
}
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
-
return 0;
err_register:
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 08/28] OMAP: DSS2: rewrite use of context_loss_count
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (6 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 07/28] OMAP: DSS2: Remove clk optimization at dss init Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 09/28] OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count Tomi Valkeinen
` (20 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
The function to get device's context loss count has changed from
omap_pm_get_last_off_on_transaction_id() to
omap_pm_get_dev_context_loss_count()
Change name of the function pointer in omapdss.h accordingly, and use
the term "context loss count" instead of "context id" in the code.
Restructure the context loss count functions to handle errors properly,
and ensure that context is always considered lost if an error happens.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/display.c | 2 +-
drivers/video/omap2/dss/dss.c | 71 +++++++++++++++++++++++++++--------------
drivers/video/omap2/dss/dss.h | 1 -
include/video/omapdss.h | 2 +-
4 files changed, 49 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 543fcb8..084a51b 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -117,7 +117,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
}
pdata.board_data = board_data;
- pdata.board_data->get_last_off_on_transaction_id = NULL;
+ pdata.board_data->get_context_loss_count = NULL;
pdata.opt_clock_available = opt_clock_available;
for (i = 0; i < oh_count; i++) {
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 57ce428..4f3de35 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -60,7 +60,7 @@ struct dss_reg {
static struct {
struct platform_device *pdev;
void __iomem *base;
- int ctx_id;
+ int ctx_loss_cnt;
struct clk *dpll4_m4_ck;
struct clk *dss_ick;
@@ -665,34 +665,58 @@ void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select hdmi)
}
/* CONTEXT */
-static int dss_get_ctx_id(void)
+static void dss_init_ctx_loss_count(void)
{
- struct omap_display_platform_data *pdata = dss.pdev->dev.platform_data;
- int r;
+ struct device *dev = &dss.pdev->dev;
+ struct omap_display_platform_data *pdata = dev->platform_data;
+ struct omap_dss_board_info *board_data = pdata->board_data;
+ int cnt = 0;
- if (!pdata->board_data->get_last_off_on_transaction_id)
- return 0;
- r = pdata->board_data->get_last_off_on_transaction_id(&dss.pdev->dev);
- if (r < 0) {
- dev_err(&dss.pdev->dev, "getting transaction ID failed, "
- "will force context restore\n");
- r = -1;
- }
- return r;
+ /*
+ * get_context_loss_count returns negative on error. We'll ignore the
+ * error and store the error to ctx_loss_cnt, which will cause
+ * dss_need_ctx_restore() call to return true.
+ */
+
+ if (board_data->get_context_loss_count)
+ cnt = board_data->get_context_loss_count(dev);
+
+ WARN_ON(cnt < 0);
+
+ dss.ctx_loss_cnt = cnt;
+
+ DSSDBG("initial ctx_loss_cnt %u\n", cnt);
}
-int dss_need_ctx_restore(void)
+static bool dss_need_ctx_restore(void)
{
- int id = dss_get_ctx_id();
+ struct device *dev = &dss.pdev->dev;
+ struct omap_display_platform_data *pdata = dev->platform_data;
+ struct omap_dss_board_info *board_data = pdata->board_data;
+ int cnt;
- if (id < 0 || id != dss.ctx_id) {
- DSSDBG("ctx id %d -> id %d\n",
- dss.ctx_id, id);
- dss.ctx_id = id;
- return 1;
- } else {
- return 0;
+ /*
+ * If get_context_loss_count is not available, assume that we need
+ * context restore always.
+ */
+ if (!board_data->get_context_loss_count)
+ return true;
+
+ cnt = board_data->get_context_loss_count(dev);
+ if (cnt < 0) {
+ dev_err(dev, "getting context loss count failed, will force "
+ "context restore\n");
+ dss.ctx_loss_cnt = cnt;
+ return true;
}
+
+ if (cnt = dss.ctx_loss_cnt)
+ return false;
+
+ DSSDBG("ctx_loss_cnt %d -> %d\n", dss.ctx_loss_cnt, cnt);
+ dss.ctx_loss_cnt = cnt;
+
+ return true;
}
static void save_all_ctx(void)
@@ -1046,8 +1070,7 @@ static int omap_dsshw_probe(struct platform_device *pdev)
dss_clk_enable_all_no_ctx();
- dss.ctx_id = dss_get_ctx_id();
- DSSDBG("initial ctx id %u\n", dss.ctx_id);
+ dss_init_ctx_loss_count();
/* disable LCD and DIGIT output. This seems to fix the synclost
* problem that we get, if the bootloader starts the DSS and
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 8ab6d43..aeb611d 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -226,7 +226,6 @@ void dss_restore_context(void);
void dss_clk_enable(enum dss_clock clks);
void dss_clk_disable(enum dss_clock clks);
unsigned long dss_clk_get_rate(enum dss_clock clk);
-int dss_need_ctx_restore(void);
const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
void dss_dump_clocks(struct seq_file *s);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index bb39738..4f914a5 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -244,7 +244,7 @@ int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel);
/* Board specific data */
struct omap_dss_board_info {
- int (*get_last_off_on_transaction_id)(struct device *dev);
+ int (*get_context_loss_count)(struct device *dev);
int num_devices;
struct omap_dss_device **devices;
struct omap_dss_device *default_device;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 09/28] OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (7 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 08/28] OMAP: DSS2: rewrite use of context_loss_count Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 10/28] OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable Tomi Valkeinen
` (19 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Initialize get_context_loss_count in the DSS board data to
omap_pm_get_dev_context_loss_count, so that omapdss driver can use it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/display.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 084a51b..c7e19c4 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,6 +25,7 @@
#include <video/omapdss.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
static struct platform_device omap_display_device = {
.name = "omapdss",
@@ -117,7 +118,8 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
}
pdata.board_data = board_data;
- pdata.board_data->get_context_loss_count = NULL;
+ pdata.board_data->get_context_loss_count + omap_pm_get_dev_context_loss_count;
pdata.opt_clock_available = opt_clock_available;
for (i = 0; i < oh_count; i++) {
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 10/28] OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (8 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 09/28] OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 11/28] OMAP: DSS2: Add FEAT_VENC_REQUIRES_TV_DAC_CLK Tomi Valkeinen
` (18 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
DSI PLL requires sys_clk to function, and DPI enables sys_clk when it
wants to use DSI PLL. However, DSI PLL code already handles enabling
sys_clk, so DPI's sys_clk code is extra.
Remove the unneeded sys_clk handling from dpi.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dpi.c | 11 +++--------
1 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index ff6bd30..bab55cd 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -202,15 +202,14 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
goto err2;
if (dpi_use_dsi_pll(dssdev)) {
- dss_clk_enable(DSS_CLK_SYSCK);
r = dsi_pll_init(dpi.dsidev, 0, 1);
if (r)
- goto err3;
+ goto err2;
}
r = dpi_set_mode(dssdev);
if (r)
- goto err4;
+ goto err3;
mdelay(2);
@@ -218,12 +217,9 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
return 0;
-err4:
- if (dpi_use_dsi_pll(dssdev))
- dsi_pll_uninit(dpi.dsidev, true);
err3:
if (dpi_use_dsi_pll(dssdev))
- dss_clk_disable(DSS_CLK_SYSCK);
+ dsi_pll_uninit(dpi.dsidev, true);
err2:
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
if (cpu_is_omap34xx())
@@ -242,7 +238,6 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
if (dpi_use_dsi_pll(dssdev)) {
dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
dsi_pll_uninit(dpi.dsidev, true);
- dss_clk_disable(DSS_CLK_SYSCK);
}
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 11/28] OMAP: DSS2: Add FEAT_VENC_REQUIRES_TV_DAC_CLK
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (9 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 10/28] OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 12/28] OMAP: DSS2: Add new FEAT definitions for features missing from OMAP2 Tomi Valkeinen
` (17 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
OMAP3430 requires an 96MHz clock to VENC's DAC, but no other OMAP needs
it.
Add a new feature, FEAT_VENC_REQUIRES_TV_DAC_CLK, which tells if the
clock is needed on this platform, and use that feature in venc.c to
decide if the clock needs enabling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dss_features.c | 3 ++-
drivers/video/omap2/dss/dss_features.h | 1 +
drivers/video/omap2/dss/venc.c | 16 ++++++++++------
3 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 1c18888..a588380 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -286,7 +286,8 @@ static const struct omap_dss_features omap3430_dss_features = {
FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
FEAT_FUNCGATED | FEAT_ROWREPEATENABLE |
FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
- FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC,
+ FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC |
+ FEAT_VENC_REQUIRES_TV_DAC_CLK,
.num_mgrs = 2,
.num_ovls = 3,
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 07b346f..3058e24 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -51,6 +51,7 @@ enum dss_feat_id {
FEAT_HDMI_CTS_SWMODE = 1 << 19,
FEAT_HANDLE_UV_SEPARATE = 1 << 20,
FEAT_ATTR2 = 1 << 21,
+ FEAT_VENC_REQUIRES_TV_DAC_CLK = 1 << 22,
};
/* DSS register field id */
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 980f919..15b4431 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -38,6 +38,7 @@
#include <plat/cpu.h>
#include "dss.h"
+#include "dss_features.h"
/* Venc registers */
#define VENC_REV_ID 0x00
@@ -382,12 +383,15 @@ static void venc_reset(void)
static void venc_enable_clocks(int enable)
{
- if (enable)
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK |
- DSS_CLK_VIDFCK);
- else
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK |
- DSS_CLK_VIDFCK);
+ if (enable) {
+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK);
+ if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK))
+ dss_clk_enable(DSS_CLK_VIDFCK);
+ } else {
+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK);
+ if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK))
+ dss_clk_disable(DSS_CLK_VIDFCK);
+ }
}
static const struct venc_config *venc_timings_to_config(
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 12/28] OMAP: DSS2: Add new FEAT definitions for features missing from OMAP2
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (10 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 11/28] OMAP: DSS2: Add FEAT_VENC_REQUIRES_TV_DAC_CLK Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 13/28] OMAP: DSS2: Remove core_dump_clocks Tomi Valkeinen
` (16 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
OMAP2 doesn't have CPR, PRELOAD nor FIR_COEF_V registers. Add new
feature definitions for those, and check the feature before accessing
those registers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 145 ++++++++++++++++++++------------
drivers/video/omap2/dss/dss_features.c | 12 ++-
drivers/video/omap2/dss/dss_features.h | 3 +
drivers/video/omap2/dss/overlay.c | 3 +
4 files changed, 105 insertions(+), 58 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a9eebd8..ee2052f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -159,7 +159,8 @@ void dispc_save_context(void)
SR(TIMING_V(OMAP_DSS_CHANNEL_LCD));
SR(POL_FREQ(OMAP_DSS_CHANNEL_LCD));
SR(DIVISORo(OMAP_DSS_CHANNEL_LCD));
- SR(GLOBAL_ALPHA);
+ if (dss_has_feature(FEAT_GLOBAL_ALPHA))
+ SR(GLOBAL_ALPHA);
SR(SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT));
SR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD));
if (dss_has_feature(FEAT_MGR_LCD2)) {
@@ -189,20 +190,25 @@ void dispc_save_context(void)
SR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD));
SR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD));
- SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
- SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
- SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
+ if (dss_has_feature(FEAT_CPR)) {
+ SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
+ SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
+ SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
+ }
if (dss_has_feature(FEAT_MGR_LCD2)) {
- SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
- SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
- SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ if (dss_has_feature(FEAT_CPR)) {
+ SR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
+ SR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
+ SR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ }
SR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2));
SR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2));
SR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2));
}
- SR(OVL_PRELOAD(OMAP_DSS_GFX));
+ if (dss_has_feature(FEAT_PRELOAD))
+ SR(OVL_PRELOAD(OMAP_DSS_GFX));
/* VID1 */
SR(OVL_BA0(OMAP_DSS_VIDEO1));
@@ -227,8 +233,10 @@ void dispc_save_context(void)
for (i = 0; i < 5; i++)
SR(OVL_CONV_COEF(OMAP_DSS_VIDEO1, i));
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, i));
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (i = 0; i < 8; i++)
+ SR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, i));
+ }
if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
SR(OVL_BA0_UV(OMAP_DSS_VIDEO1));
@@ -249,7 +257,8 @@ void dispc_save_context(void)
if (dss_has_feature(FEAT_ATTR2))
SR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO1));
- SR(OVL_PRELOAD(OMAP_DSS_VIDEO1));
+ if (dss_has_feature(FEAT_PRELOAD))
+ SR(OVL_PRELOAD(OMAP_DSS_VIDEO1));
/* VID2 */
SR(OVL_BA0(OMAP_DSS_VIDEO2));
@@ -274,8 +283,10 @@ void dispc_save_context(void)
for (i = 0; i < 5; i++)
SR(OVL_CONV_COEF(OMAP_DSS_VIDEO2, i));
- for (i = 0; i < 8; i++)
- SR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, i));
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (i = 0; i < 8; i++)
+ SR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, i));
+ }
if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
SR(OVL_BA0_UV(OMAP_DSS_VIDEO2));
@@ -296,7 +307,8 @@ void dispc_save_context(void)
if (dss_has_feature(FEAT_ATTR2))
SR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO2));
- SR(OVL_PRELOAD(OMAP_DSS_VIDEO2));
+ if (dss_has_feature(FEAT_PRELOAD))
+ SR(OVL_PRELOAD(OMAP_DSS_VIDEO2));
if (dss_has_feature(FEAT_CORE_CLK_DIV))
SR(DIVISOR);
@@ -318,7 +330,8 @@ void dispc_restore_context(void)
RR(TIMING_V(OMAP_DSS_CHANNEL_LCD));
RR(POL_FREQ(OMAP_DSS_CHANNEL_LCD));
RR(DIVISORo(OMAP_DSS_CHANNEL_LCD));
- RR(GLOBAL_ALPHA);
+ if (dss_has_feature(FEAT_GLOBAL_ALPHA))
+ RR(GLOBAL_ALPHA);
RR(SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT));
RR(SIZE_MGR(OMAP_DSS_CHANNEL_LCD));
if (dss_has_feature(FEAT_MGR_LCD2)) {
@@ -348,20 +361,25 @@ void dispc_restore_context(void)
RR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD));
RR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD));
- RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
- RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
- RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
+ if (dss_has_feature(FEAT_CPR)) {
+ RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
+ RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
+ RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
+ }
if (dss_has_feature(FEAT_MGR_LCD2)) {
RR(DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2));
RR(DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2));
RR(DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2));
- RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
- RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
- RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ if (dss_has_feature(FEAT_CPR)) {
+ RR(CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
+ RR(CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
+ RR(CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ }
}
- RR(OVL_PRELOAD(OMAP_DSS_GFX));
+ if (dss_has_feature(FEAT_PRELOAD))
+ RR(OVL_PRELOAD(OMAP_DSS_GFX));
/* VID1 */
RR(OVL_BA0(OMAP_DSS_VIDEO1));
@@ -386,8 +404,10 @@ void dispc_restore_context(void)
for (i = 0; i < 5; i++)
RR(OVL_CONV_COEF(OMAP_DSS_VIDEO1, i));
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, i));
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (i = 0; i < 8; i++)
+ RR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, i));
+ }
if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
RR(OVL_BA0_UV(OMAP_DSS_VIDEO1));
@@ -408,7 +428,8 @@ void dispc_restore_context(void)
if (dss_has_feature(FEAT_ATTR2))
RR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO1));
- RR(OVL_PRELOAD(OMAP_DSS_VIDEO1));
+ if (dss_has_feature(FEAT_PRELOAD))
+ RR(OVL_PRELOAD(OMAP_DSS_VIDEO1));
/* VID2 */
RR(OVL_BA0(OMAP_DSS_VIDEO2));
@@ -433,8 +454,10 @@ void dispc_restore_context(void)
for (i = 0; i < 5; i++)
RR(OVL_CONV_COEF(OMAP_DSS_VIDEO2, i));
- for (i = 0; i < 8; i++)
- RR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, i));
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ for (i = 0; i < 8; i++)
+ RR(OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, i));
+ }
if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
RR(OVL_BA0_UV(OMAP_DSS_VIDEO2));
@@ -455,7 +478,8 @@ void dispc_restore_context(void)
if (dss_has_feature(FEAT_ATTR2))
RR(OVL_ATTRIBUTES2(OMAP_DSS_VIDEO2));
- RR(OVL_PRELOAD(OMAP_DSS_VIDEO2));
+ if (dss_has_feature(FEAT_PRELOAD))
+ RR(OVL_PRELOAD(OMAP_DSS_VIDEO2));
if (dss_has_feature(FEAT_CORE_CLK_DIV))
RR(DIVISOR);
@@ -2650,7 +2674,8 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_TIMING_V(OMAP_DSS_CHANNEL_LCD));
DUMPREG(DISPC_POL_FREQ(OMAP_DSS_CHANNEL_LCD));
DUMPREG(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_GLOBAL_ALPHA);
+ if (dss_has_feature(FEAT_GLOBAL_ALPHA))
+ DUMPREG(DISPC_GLOBAL_ALPHA);
DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT));
DUMPREG(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_LCD));
if (dss_has_feature(FEAT_MGR_LCD2)) {
@@ -2681,20 +2706,25 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD));
DUMPREG(DISPC_DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
- DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
+ if (dss_has_feature(FEAT_CPR)) {
+ DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD));
+ DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD));
+ DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD));
+ }
if (dss_has_feature(FEAT_MGR_LCD2)) {
DUMPREG(DISPC_DATA_CYCLE1(OMAP_DSS_CHANNEL_LCD2));
DUMPREG(DISPC_DATA_CYCLE2(OMAP_DSS_CHANNEL_LCD2));
DUMPREG(DISPC_DATA_CYCLE3(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
- DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
+ if (dss_has_feature(FEAT_CPR)) {
+ DUMPREG(DISPC_CPR_COEF_R(OMAP_DSS_CHANNEL_LCD2));
+ DUMPREG(DISPC_CPR_COEF_G(OMAP_DSS_CHANNEL_LCD2));
+ DUMPREG(DISPC_CPR_COEF_B(OMAP_DSS_CHANNEL_LCD2));
+ }
}
- DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_GFX));
+ if (dss_has_feature(FEAT_PRELOAD))
+ DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_GFX));
DUMPREG(DISPC_OVL_BA0(OMAP_DSS_VIDEO1));
DUMPREG(DISPC_OVL_BA1(OMAP_DSS_VIDEO1));
@@ -2745,14 +2775,16 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 2));
DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 3));
DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 7));
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 0));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 1));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 2));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 3));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 4));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 5));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 6));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO1, 7));
+ }
if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
DUMPREG(DISPC_OVL_BA0_UV(OMAP_DSS_VIDEO1));
@@ -2813,14 +2845,17 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 2));
DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 3));
DUMPREG(DISPC_OVL_CONV_COEF(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 0));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 1));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 2));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 3));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 4));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 5));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 6));
- DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 7));
+
+ if (dss_has_feature(FEAT_FIR_COEF_V)) {
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 0));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 1));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 2));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 3));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 4));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 5));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 6));
+ DUMPREG(DISPC_OVL_FIR_COEF_V(OMAP_DSS_VIDEO2, 7));
+ }
if (dss_has_feature(FEAT_HANDLE_UV_SEPARATE)) {
DUMPREG(DISPC_OVL_BA0_UV(OMAP_DSS_VIDEO2));
@@ -2859,8 +2894,10 @@ void dispc_dump_regs(struct seq_file *s)
if (dss_has_feature(FEAT_ATTR2))
DUMPREG(DISPC_OVL_ATTRIBUTES2(OMAP_DSS_VIDEO2));
- DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO1));
- DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO2));
+ if (dss_has_feature(FEAT_PRELOAD)) {
+ DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO1));
+ DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO2));
+ }
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
#undef DUMPREG
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index a588380..bd420f9 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -287,7 +287,8 @@ static const struct omap_dss_features omap3430_dss_features = {
FEAT_FUNCGATED | FEAT_ROWREPEATENABLE |
FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC |
- FEAT_VENC_REQUIRES_TV_DAC_CLK,
+ FEAT_VENC_REQUIRES_TV_DAC_CLK | FEAT_CPR | FEAT_PRELOAD |
+ FEAT_FIR_COEF_V,
.num_mgrs = 2,
.num_ovls = 3,
@@ -307,7 +308,8 @@ static const struct omap_dss_features omap3630_dss_features = {
FEAT_PRE_MULT_ALPHA | FEAT_FUNCGATED |
FEAT_ROWREPEATENABLE | FEAT_LINEBUFFERSPLIT |
FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG |
- FEAT_DSI_PLL_FREQSEL,
+ FEAT_DSI_PLL_FREQSEL | FEAT_CPR | FEAT_PRELOAD |
+ FEAT_FIR_COEF_V,
.num_mgrs = 2,
.num_ovls = 3,
@@ -328,7 +330,8 @@ static const struct omap_dss_features omap4430_es1_0_dss_features = {
FEAT_MGR_LCD2 | FEAT_GLOBAL_ALPHA_VID1 |
FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
- FEAT_DSI_GNQ | FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2,
+ FEAT_DSI_GNQ | FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 |
+ FEAT_CPR | FEAT_PRELOAD | FEAT_FIR_COEF_V,
.num_mgrs = 3,
.num_ovls = 3,
@@ -349,7 +352,8 @@ static const struct omap_dss_features omap4_dss_features = {
FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
FEAT_DSI_GNQ | FEAT_HDMI_CTS_SWMODE |
- FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2,
+ FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 | FEAT_CPR |
+ FEAT_PRELOAD | FEAT_FIR_COEF_V,
.num_mgrs = 3,
.num_ovls = 3,
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 3058e24..5be8103 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -52,6 +52,9 @@ enum dss_feat_id {
FEAT_HANDLE_UV_SEPARATE = 1 << 20,
FEAT_ATTR2 = 1 << 21,
FEAT_VENC_REQUIRES_TV_DAC_CLK = 1 << 22,
+ FEAT_CPR = 1 << 23,
+ FEAT_PRELOAD = 1 << 24,
+ FEAT_FIR_COEF_V = 1 << 25,
};
/* DSS register field id */
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0f08025..cfbfc57 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -238,6 +238,9 @@ static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
u8 alpha;
struct omap_overlay_info info;
+ if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
+ return -ENODEV;
+
r = kstrtou8(buf, 0, &alpha);
if (r)
return r;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 13/28] OMAP: DSS2: Remove core_dump_clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (11 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 12/28] OMAP: DSS2: Add new FEAT definitions for features missing from OMAP2 Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 14/28] OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET Tomi Valkeinen
` (15 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Currently dss.c does all the low level clock handling in the DSS, and
thus it contains pointers to all the clocks. This allows dss.c to dump
the clock information for all the clocks.
With pm_runtime this is no longer the case, as each submodule will
handle its clocks independently. Thus remove the core_dump_clocks
function as it cannot be used with pm_runtime.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dss.c | 40 ----------------------------------------
1 files changed, 0 insertions(+), 40 deletions(-)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 4f3de35..ff5664e 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -989,50 +989,10 @@ static void dss_clk_disable_all_no_ctx(void)
dss_clk_disable_no_ctx(clks);
}
-#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
-/* CLOCKS */
-static void core_dump_clocks(struct seq_file *s)
-{
- int i;
- struct clk *clocks[5] = {
- dss.dss_ick,
- dss.dss_fck,
- dss.dss_sys_clk,
- dss.dss_tv_fck,
- dss.dss_video_fck
- };
-
- const char *names[5] = {
- "ick",
- "fck",
- "sys_clk",
- "tv_fck",
- "video_fck"
- };
-
- seq_printf(s, "- CORE -\n");
-
- seq_printf(s, "internal clk count\t\t%u\n", dss.num_clks_enabled);
-
- for (i = 0; i < 5; i++) {
- if (!clocks[i])
- continue;
- seq_printf(s, "%s (%s)%*s\t%lu\t%d\n",
- names[i],
- clocks[i]->name,
- 24 - strlen(names[i]) - strlen(clocks[i]->name),
- "",
- clk_get_rate(clocks[i]),
- clocks[i]->usecount);
- }
-}
-#endif /* defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) */
-
/* DEBUGFS */
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
void dss_debug_dump_clocks(struct seq_file *s)
{
- core_dump_clocks(s);
dss_dump_clocks(s);
dispc_dump_clocks(s);
#ifdef CONFIG_OMAP2_DSS_DSI
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 14/28] OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (12 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 13/28] OMAP: DSS2: Remove core_dump_clocks Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 15/28] OMAP4: HWMOD: Modify DSS opt clocks Tomi Valkeinen
` (14 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET is used to avoid an unclear bug at
DSS reset time. The pm runtime will handle reset in the future, and this
code has to be removed. Hopefully we won't see this error anymore.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Kconfig | 12 ------------
drivers/video/omap2/dss/dss.c | 13 -------------
2 files changed, 0 insertions(+), 25 deletions(-)
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 6b3e2da..0d12524 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -117,18 +117,6 @@ config OMAP2_DSS_MIN_FCK_PER_PCK
Max FCK is 173MHz, so this doesn't work if your PCK
is very high.
-config OMAP2_DSS_SLEEP_BEFORE_RESET
- bool "Sleep 50ms before DSS reset"
- default y
- help
- For some unknown reason we may get SYNC_LOST errors from the display
- subsystem at initialization time if we don't sleep before resetting
- the DSS. See the source (dss.c) for more comments.
-
- However, 50ms is quite long time to sleep, and with some
- configurations the SYNC_LOST may never happen, so the sleep can
- be disabled here.
-
config OMAP2_DSS_SLEEP_AFTER_VENC_RESET
bool "Sleep 20ms after VENC reset"
default y
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index ff5664e..810ea8c 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -1037,19 +1037,6 @@ static int omap_dsshw_probe(struct platform_device *pdev)
* the kernel resets it */
omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
-#ifdef CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
- /* We need to wait here a bit, otherwise we sometimes start to
- * get synclost errors, and after that only power cycle will
- * restore DSS functionality. I have no idea why this happens.
- * And we have to wait _before_ resetting the DSS, but after
- * enabling clocks.
- *
- * This bug was at least present on OMAP3430. It's unknown
- * if it happens on OMAP2 or OMAP3630.
- */
- msleep(50);
-#endif
-
_omap_dss_reset();
/* autoidle */
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 15/28] OMAP4: HWMOD: Modify DSS opt clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (13 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 14/28] OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-15 11:23 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 16/28] OMAP3: HWMOD: Add " Tomi Valkeinen
` (13 subsequent siblings)
28 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Add missing DSS optional clocks to HWMOD data for OMAP4xxx.
Add HWMOD_CONTROL_OPT_CLKS_IN_RESET flag for dispc to fix dispc reset.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 40 ++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index abc548a..4f6ae94 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1263,9 +1263,21 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
&omap44xx_l4_per__dss_dispc,
};
+static struct omap_hwmod_opt_clk dispc_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss_dss_clk" },
+ /*
+ * The rest of the clocks are not needed by the driver,
+ * but are needed by the hwmod to reset DSS properly.
+ */
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+ { .role = "tv_clk", .clk = "dss_tv_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.mpu_irqs = omap44xx_dss_dispc_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_irqs),
.sdma_reqs = omap44xx_dss_dispc_sdma_reqs,
@@ -1276,6 +1288,8 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
+ .opt_clks = dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1354,6 +1368,11 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = {
&omap44xx_l4_per__dss_dsi1,
};
+static struct omap_hwmod_opt_clk dsi1_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss_dss_clk" },
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap44xx_dsi_hwmod_class,
@@ -1367,6 +1386,8 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
+ .opt_clks = dsi1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1514,6 +1535,11 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = {
&omap44xx_l4_per__dss_hdmi,
};
+static struct omap_hwmod_opt_clk hdmi_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
+ { .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
@@ -1527,6 +1553,8 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
+ .opt_clks = hdmi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1600,6 +1628,10 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = {
&omap44xx_l4_per__dss_rfbi,
};
+static struct omap_hwmod_opt_clk rfbi_opt_clks[] = {
+ { .role = "rfbi_iclk", .clk = "dss_fck" },
+};
+
static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap44xx_rfbi_hwmod_class,
@@ -1611,6 +1643,8 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
+ .opt_clks = rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -1669,6 +1703,10 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = {
&omap44xx_l4_per__dss_venc,
};
+static struct omap_hwmod_opt_clk venc_opt_clks[] = {
+ { .role = "tv_clk", .clk = "dss_tv_clk" },
+};
+
static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
@@ -1678,6 +1716,8 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
},
},
+ .opt_clks = venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(venc_opt_clks),
.slaves = omap44xx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 15/28] OMAP4: HWMOD: Modify DSS opt clocks
2011-06-09 13:56 ` [PATCHv2 15/28] OMAP4: HWMOD: Modify DSS opt clocks Tomi Valkeinen
@ 2011-06-15 11:23 ` Tomi Valkeinen
2011-06-21 6:20 ` Tomi Valkeinen
0 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-15 11:23 UTC (permalink / raw)
To: b-cousson; +Cc: linux-fbdev, paul, khilman, linux-omap mailing list
On Thu, 2011-06-09 at 16:56 +0300, Tomi Valkeinen wrote:
> Add missing DSS optional clocks to HWMOD data for OMAP4xxx.
>
> Add HWMOD_CONTROL_OPT_CLKS_IN_RESET flag for dispc to fix dispc reset.
>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Benoit (and/or Paul/Kevin), can you ack this and the other HWMOD
patches, or give comments?
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 15/28] OMAP4: HWMOD: Modify DSS opt clocks
2011-06-15 11:23 ` Tomi Valkeinen
@ 2011-06-21 6:20 ` Tomi Valkeinen
0 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-21 6:20 UTC (permalink / raw)
To: b-cousson; +Cc: linux-fbdev, paul, khilman, linux-omap mailing list
On Wed, 2011-06-15 at 14:23 +0300, Tomi Valkeinen wrote:
> On Thu, 2011-06-09 at 16:56 +0300, Tomi Valkeinen wrote:
> > Add missing DSS optional clocks to HWMOD data for OMAP4xxx.
> >
> > Add HWMOD_CONTROL_OPT_CLKS_IN_RESET flag for dispc to fix dispc reset.
> >
> > Cc: Benoit Cousson <b-cousson@ti.com>
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>
> Benoit (and/or Paul/Kevin), can you ack this and the other HWMOD
> patches, or give comments?
Ping.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* [PATCHv2 16/28] OMAP3: HWMOD: Add DSS opt clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (14 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 15/28] OMAP4: HWMOD: Modify DSS opt clocks Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-07-15 6:49 ` Paul Walmsley
2011-06-09 13:56 ` [PATCHv2 17/28] OMAP2420: " Tomi Valkeinen
` (12 subsequent siblings)
28 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Add DSS optional clocks to HWMOD data for OMAP3xxx.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 37 ++++++++++++++++++++++++++-
1 files changed, 35 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 909a84d..5fac4c0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1542,9 +1542,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- { .role = "tv_clk", .clk = "dss_tv_fck" },
- { .role = "video_clk", .clk = "dss_96m_fck" },
+ { .role = "dss_clk", .clk = "dss1_alwon_fck" },
+ /*
+ * The rest of the clocks are not needed by the driver,
+ * but are needed by the hwmod to reset DSS properly.
+ */
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+ { .role = "tv_clk", .clk = "dss_tv_fck" },
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@@ -1656,6 +1662,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
&omap3xxx_l4_core__dss_dispc,
};
+static struct omap_hwmod_opt_clk dispc_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss1_alwon_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap3xxx_dispc_hwmod_class,
@@ -1669,6 +1679,8 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dispc_opt_clks),
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
@@ -1720,6 +1732,11 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
&omap3xxx_l4_core__dss_dsi1,
};
+static struct omap_hwmod_opt_clk dsi1_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss1_alwon_fck" },
+ { .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
@@ -1733,6 +1750,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dsi1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dsi1_opt_clks),
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
@@ -1791,6 +1810,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
&omap3xxx_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk rfbi_opt_clks[] = {
+ { .role = "rfbi_iclk", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap3xxx_rfbi_hwmod_class,
@@ -1802,6 +1825,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(rfbi_opt_clks),
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
@@ -1851,6 +1876,12 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
&omap3xxx_l4_core__dss_venc,
};
+static struct omap_hwmod_opt_clk venc_opt_clks[] = {
+ { .role = "tv_clk", .clk = "dss_tv_fck" },
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap3xxx_venc_hwmod_class,
@@ -1862,6 +1893,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(venc_opt_clks),
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 16/28] OMAP3: HWMOD: Add DSS opt clocks
2011-06-09 13:56 ` [PATCHv2 16/28] OMAP3: HWMOD: Add " Tomi Valkeinen
@ 2011-07-15 6:49 ` Paul Walmsley
2011-08-02 1:27 ` Paul Walmsley
0 siblings, 1 reply; 54+ messages in thread
From: Paul Walmsley @ 2011-07-15 6:49 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
> Add DSS optional clocks to HWMOD data for OMAP3xxx.
Thanks; queued for 3.1-rc fixes at git://git.pwsan.com/linux-2.6 in the
branch 'omap2_3_hwmod_dss_fixes_3.1rc'.
- Paul
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 16/28] OMAP3: HWMOD: Add DSS opt clocks
2011-07-15 6:49 ` Paul Walmsley
@ 2011-08-02 1:27 ` Paul Walmsley
2011-08-02 7:47 ` Tomi Valkeinen
0 siblings, 1 reply; 54+ messages in thread
From: Paul Walmsley @ 2011-08-02 1:27 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
Hello Tomi,
On Fri, 15 Jul 2011, Paul Walmsley wrote:
> On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
>
> > Add DSS optional clocks to HWMOD data for OMAP3xxx.
>
> Thanks; queued for 3.1-rc fixes at git://git.pwsan.com/linux-2.6 in the
> branch 'omap2_3_hwmod_dss_fixes_3.1rc'.
This patch has been updated to remove the temporary hack added to the DSS
driver. Care to review it before it's sent to Tony?
- Paul
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 15 Jul 2011 00:54:34 -0600
Subject: [PATCH 2/2] OMAP3: HWMOD: Add DSS opt clocks
Add DSS optional clocks to HWMOD data for OMAP3xxx.
Revert OMAP3 portion of commit
9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3").
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: remove temporary DSS driver hack; update changelog]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 32 ++++++++++++++++++++++++---
drivers/video/omap2/dss/dsi.c | 2 +-
drivers/video/omap2/dss/dss.h | 2 -
drivers/video/omap2/dss/rfbi.c | 5 +---
drivers/video/omap2/dss/venc.c | 5 +---
5 files changed, 31 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 25bf43b..38ee033 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1365,9 +1365,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- { .role = "tv_clk", .clk = "dss_tv_fck" },
- { .role = "video_clk", .clk = "dss_96m_fck" },
+ /*
+ * The rest of the clocks are not needed by the driver,
+ * but are needed by the hwmod to reset DSS properly.
+ */
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
+ { .role = "tv_clk", .clk = "dss_tv_fck" },
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@@ -1504,6 +1509,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
&omap3xxx_l4_core__dss_dsi1,
};
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss2_alwon_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
@@ -1516,6 +1525,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dss_dsi1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
@@ -1545,6 +1556,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
&omap3xxx_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -1556,6 +1571,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
@@ -1568,7 +1585,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_venc_hwmod,
- .clk = "dss_tv_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@@ -1586,10 +1603,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
&omap3xxx_l4_core__dss_venc,
};
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+};
+
static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_alwon_fck",
+ .main_clk = "dss_tv_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -1597,6 +1619,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
+ .opt_clks = dss_venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 7adbbeb..0645170 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4427,7 +4427,7 @@ static int dsi_get_clocks(struct platform_device *dsidev)
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct clk *clk;
- clk = clk_get(&dsidev->dev, "fck");
+ clk = clk_get(&dsidev->dev, "sys_clk");
if (IS_ERR(clk)) {
DSSERR("can't get fck\n");
return PTR_ERR(clk);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 9c94b11..adeff04 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -209,8 +209,6 @@ void dss_uninit_platform_driver(void);
int dss_runtime_get(void);
void dss_runtime_put(void);
-struct clk *dss_get_ick(void);
-
void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
void dss_dump_clocks(struct seq_file *s);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 457f1ac..2d31cc1 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -952,10 +952,7 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
msleep(10);
- if (cpu_is_omap34xx() || cpu_is_omap3630())
- clk = dss_get_ick();
- else
- clk = clk_get(&pdev->dev, "ick");
+ clk = clk_get(&pdev->dev, "ick");
if (IS_ERR(clk)) {
DSSERR("can't get ick\n");
r = PTR_ERR(clk);
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 173c664..71e005d 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -741,10 +741,7 @@ static int venc_get_clocks(struct platform_device *pdev)
venc.tv_clk = clk;
if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK)) {
- if (cpu_is_omap34xx() || cpu_is_omap3630())
- clk = clk_get(&pdev->dev, "dss_96m_fck");
- else
- clk = clk_get(&pdev->dev, "tv_dac_clk");
+ clk = clk_get(&pdev->dev, "tv_dac_clk");
if (IS_ERR(clk)) {
DSSERR("can't get tv_dac_clk\n");
clk_put(venc.tv_clk);
--
1.7.5.4
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 16/28] OMAP3: HWMOD: Add DSS opt clocks
2011-08-02 1:27 ` Paul Walmsley
@ 2011-08-02 7:47 ` Tomi Valkeinen
0 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-08-02 7:47 UTC (permalink / raw)
To: Paul Walmsley; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
HI,
On Mon, 2011-08-01 at 19:27 -0600, Paul Walmsley wrote:
> Hello Tomi,
>
> On Fri, 15 Jul 2011, Paul Walmsley wrote:
>
> > On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
> >
> > > Add DSS optional clocks to HWMOD data for OMAP3xxx.
> >
> > Thanks; queued for 3.1-rc fixes at git://git.pwsan.com/linux-2.6 in the
> > branch 'omap2_3_hwmod_dss_fixes_3.1rc'.
>
> This patch has been updated to remove the temporary hack added to the DSS
> driver. Care to review it before it's sent to Tony?
My hacks (for the OMAP2 case also) use the clocks from the clockdata,
thus fixing the hwmod data won't make the hacks break. So I think it's
cleaner if the HWMOD patches go separately through you, and I'll revert
the hacks in my tree.
But a few comments inline, which I noticed just now.
> - Paul
>
> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Date: Fri, 15 Jul 2011 00:54:34 -0600
> Subject: [PATCH 2/2] OMAP3: HWMOD: Add DSS opt clocks
>
> Add DSS optional clocks to HWMOD data for OMAP3xxx.
>
> Revert OMAP3 portion of commit
> 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack
> for OMAP2/3").
>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> [paul@pwsan.com: remove temporary DSS driver hack; update changelog]
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 32 ++++++++++++++++++++++++---
> drivers/video/omap2/dss/dsi.c | 2 +-
> drivers/video/omap2/dss/dss.h | 2 -
> drivers/video/omap2/dss/rfbi.c | 5 +---
> drivers/video/omap2/dss/venc.c | 5 +---
> 5 files changed, 31 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> index 25bf43b..38ee033 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
> @@ -1365,9 +1365,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
> };
>
> static struct omap_hwmod_opt_clk dss_opt_clks[] = {
> - { .role = "tv_clk", .clk = "dss_tv_fck" },
> - { .role = "video_clk", .clk = "dss_96m_fck" },
> + /*
> + * The rest of the clocks are not needed by the driver,
> + * but are needed by the hwmod to reset DSS properly.
> + */
I think this wording should be changed, as with the latest hwmod code
changes the dss_core does not use any opt clocks, and these all are just
to make the dss reset work.
Perhaps something like "The DSS HW needs all DSS clocks enabled during
reset. The dss_core driver does not use these clocks."
> { .role = "sys_clk", .clk = "dss2_alwon_fck" },
> + { .role = "tv_clk", .clk = "dss_tv_fck" },
> + /* required only on OMAP3430 */
> + { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
> };
The dss_96m_fck exists only on OMAP3430. What happens when the HWMOD
code tries to reset DSS on OMAP3630, and it first enables all the opt
clocks, and encounters the dss_96m_fck which doesn't exist?
Although, looking at the clock3xxx_data.c, it looks like dss_96m_fck is
there, but I'm not sure what it is controlling. Does the clock exist in
the HW, but it's just not connected to DSS?
The hwmod code should also set HWMOD_CONTROL_OPT_CLKS_IN_RESET for
dss_core, shouldn't it?
> static struct omap_hwmod omap3430es1_dss_core_hwmod = {
> @@ -1504,6 +1509,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
> &omap3xxx_l4_core__dss_dsi1,
> };
>
> +static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
> + { .role = "sys_clk", .clk = "dss2_alwon_fck" },
> +};
> +
DSI is missing the interface clock in omap3xxx_l4_core__dss_dsi1. Should
it have .clk = "dss_ick" like the other dss modules?
I can make a new patch with these changes if they look correct to you.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* [PATCHv2 17/28] OMAP2420: HWMOD: Add DSS opt clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (15 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 16/28] OMAP3: HWMOD: Add " Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-07-15 6:48 ` Paul Walmsley
2011-06-09 13:56 ` [PATCHv2 18/28] OMAP2430: " Tomi Valkeinen
` (11 subsequent siblings)
28 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Add DSS optional clocks to HWMOD data for OMAP2420.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index c4d0ae8..d87019d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1208,6 +1208,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss1_fck" },
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
@@ -1291,6 +1292,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
&omap2420_l4_core__dss_dispc,
};
+static struct omap_hwmod_opt_clk dispc_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss1_fck" },
+};
+
static struct omap_hwmod omap2420_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap2420_dispc_hwmod_class,
@@ -1306,6 +1311,8 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = {
.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
},
},
+ .opt_clks = dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dispc_opt_clks),
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -1361,6 +1368,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
&omap2420_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk rfbi_opt_clks[] = {
+ { .role = "rfbi_iclk", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2420_rfbi_hwmod_class,
@@ -1372,6 +1383,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(rfbi_opt_clks),
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -1418,6 +1431,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
&omap2420_l4_core__dss_venc,
};
+static struct omap_hwmod_opt_clk venc_opt_clks[] = {
+ { .role = "tv_clk", .clk = "dss_54m_fck" },
+};
+
static struct omap_hwmod omap2420_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2420_venc_hwmod_class,
@@ -1429,6 +1446,8 @@ static struct omap_hwmod omap2420_dss_venc_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(venc_opt_clks),
.slaves = omap2420_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 17/28] OMAP2420: HWMOD: Add DSS opt clocks
2011-06-09 13:56 ` [PATCHv2 17/28] OMAP2420: " Tomi Valkeinen
@ 2011-07-15 6:48 ` Paul Walmsley
2011-08-02 1:14 ` Paul Walmsley
0 siblings, 1 reply; 54+ messages in thread
From: Paul Walmsley @ 2011-07-15 6:48 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
> Add DSS optional clocks to HWMOD data for OMAP2420.
Thanks; queued for 3.1-rc fixes at git://git.pwsan.com/linux-2.6 in the
branch 'omap2_3_hwmod_dss_fixes_3.1rc'.
- Paul
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 17/28] OMAP2420: HWMOD: Add DSS opt clocks
2011-07-15 6:48 ` Paul Walmsley
@ 2011-08-02 1:14 ` Paul Walmsley
2011-08-02 7:57 ` Tomi Valkeinen
0 siblings, 1 reply; 54+ messages in thread
From: Paul Walmsley @ 2011-08-02 1:14 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
Hello Tomi
On Fri, 15 Jul 2011, Paul Walmsley wrote:
> On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
>
> > Add DSS optional clocks to HWMOD data for OMAP2420.
This patch has been combined with the 2430 patch and the OMAP2xxx portion
of the temporary hack in the DSS driver has been removed. Care to review
the new changes before it's sent to Tony?
- Paul
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 1 Aug 2011 19:02:23 -0600
Subject: [PATCH 1/2] OMAP2xxx: HWMOD: Add DSS opt clocks
Add DSS optional clocks to HWMOD data for OMAP2420 and OMAP2430.
Revert OMAP2xxx portion of commit
9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack
for OMAP2/3").
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: merge 2420 and 2430 patches; remove temporary DSS driver hack;
update changelog]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 17 ++++++++---------
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 17 ++++++++---------
drivers/video/omap2/dss/rfbi.c | 2 +-
3 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..b075188 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -873,11 +873,6 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
&omap2420_l4_core__dss,
};
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- { .role = "tv_clk", .clk = "dss_54m_fck" },
- { .role = "sys_clk", .clk = "dss2_fck" },
-};
-
static struct omap_hwmod omap2420_dss_core_hwmod = {
.name = "dss_core",
.class = &omap2_dss_hwmod_class,
@@ -892,8 +887,6 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
},
},
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
.slaves = omap2420_dss_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
@@ -962,6 +955,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
&omap2420_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -973,6 +970,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -983,7 +982,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_dss_venc_hwmod,
- .clk = "dss_54m_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@@ -1003,7 +1002,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
static struct omap_hwmod omap2420_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_fck",
+ .main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 16743c7..3569084 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -939,11 +939,6 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
&omap2430_l4_core__dss,
};
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- { .role = "tv_clk", .clk = "dss_54m_fck" },
- { .role = "sys_clk", .clk = "dss2_fck" },
-};
-
static struct omap_hwmod omap2430_dss_core_hwmod = {
.name = "dss_core",
.class = &omap2_dss_hwmod_class,
@@ -958,8 +953,6 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
},
},
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
.slaves = omap2430_dss_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
@@ -1016,6 +1009,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
&omap2430_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@@ -1027,6 +1024,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -1037,7 +1036,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_dss_venc_hwmod,
- .clk = "dss_54m_fck",
+ .clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
@@ -1051,7 +1050,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
static struct omap_hwmod omap2430_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
- .main_clk = "dss1_fck",
+ .main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 39f4c59..457f1ac 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -952,7 +952,7 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
msleep(10);
- if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap3630())
+ if (cpu_is_omap34xx() || cpu_is_omap3630())
clk = dss_get_ick();
else
clk = clk_get(&pdev->dev, "ick");
--
1.7.5.4
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 17/28] OMAP2420: HWMOD: Add DSS opt clocks
2011-08-02 1:14 ` Paul Walmsley
@ 2011-08-02 7:57 ` Tomi Valkeinen
0 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-08-02 7:57 UTC (permalink / raw)
To: Paul Walmsley; +Cc: linux-omap, linux-fbdev, b-cousson, khilman
Hi,
On Mon, 2011-08-01 at 19:14 -0600, Paul Walmsley wrote:
> Hello Tomi
>
> On Fri, 15 Jul 2011, Paul Walmsley wrote:
>
> > On Thu, 9 Jun 2011, Tomi Valkeinen wrote:
> >
> > > Add DSS optional clocks to HWMOD data for OMAP2420.
>
> This patch has been combined with the 2430 patch and the OMAP2xxx portion
> of the temporary hack in the DSS driver has been removed. Care to review
> the new changes before it's sent to Tony?
Same thing here, I can revert the dss hacks separately.
>
> - Paul
>
>
> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Date: Mon, 1 Aug 2011 19:02:23 -0600
> Subject: [PATCH 1/2] OMAP2xxx: HWMOD: Add DSS opt clocks
>
> Add DSS optional clocks to HWMOD data for OMAP2420 and OMAP2430.
>
> Revert OMAP2xxx portion of commit
> 9ede365aa6f74428a1f69c21ca1cf21213167576 ("HACK: OMAP: DSS2: clk hack
> for OMAP2/3").
>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> [paul@pwsan.com: merge 2420 and 2430 patches; remove temporary DSS driver hack;
> update changelog]
> Signed-off-by: Paul Walmsley <paul@pwsan.com>
> ---
> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 17 ++++++++---------
> arch/arm/mach-omap2/omap_hwmod_2430_data.c | 17 ++++++++---------
> drivers/video/omap2/dss/rfbi.c | 2 +-
> 3 files changed, 17 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> index a015c69..b075188 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
> @@ -873,11 +873,6 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
> &omap2420_l4_core__dss,
> };
>
> -static struct omap_hwmod_opt_clk dss_opt_clks[] = {
> - { .role = "tv_clk", .clk = "dss_54m_fck" },
> - { .role = "sys_clk", .clk = "dss2_fck" },
> -};
I removed the opt clocks as the TRM doesn't say that the clocks need to
be enabled when resetting the DSS, but now thinking about it, I feel
it's safer to enable the clocks like we do on OMAP3. I think it's
unlikely that the HW could finish the reset if the clocks are off.
So let's forget this removal of dss opt clocks and add them back. And
also I think HWMOD_CONTROL_OPT_CLKS_IN_RESET is needed for dss_core.
I can make a new patch for this also.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* [PATCHv2 18/28] OMAP2430: HWMOD: Add DSS opt clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (16 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 17/28] OMAP2420: " Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-07-15 6:49 ` Paul Walmsley
2011-06-09 13:56 ` [PATCHv2 19/28] OMAP4: HWMOD: change DSS main_clk scheme Tomi Valkeinen
` (10 subsequent siblings)
28 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Add DSS optional clocks to HWMOD data for OMAP2430.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 9682dd5..8009945 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1302,6 +1302,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss1_fck" },
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
@@ -1379,6 +1380,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = {
&omap2430_l4_core__dss_dispc,
};
+static struct omap_hwmod_opt_clk dispc_opt_clks[] = {
+ { .role = "dss_clk", .clk = "dss1_fck" },
+};
+
static struct omap_hwmod omap2430_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap2430_dispc_hwmod_class,
@@ -1394,6 +1399,8 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = {
.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
},
},
+ .opt_clks = dispc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dispc_opt_clks),
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -1443,6 +1450,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
&omap2430_l4_core__dss_rfbi,
};
+static struct omap_hwmod_opt_clk rfbi_opt_clks[] = {
+ { .role = "rfbi_iclk", .clk = "dss_ick" },
+};
+
static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2430_rfbi_hwmod_class,
@@ -1454,6 +1465,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(rfbi_opt_clks),
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -1494,6 +1507,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
&omap2430_l4_core__dss_venc,
};
+static struct omap_hwmod_opt_clk venc_opt_clks[] = {
+ { .role = "tv_clk", .clk = "dss_54m_fck" },
+};
+
static struct omap_hwmod omap2430_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2430_venc_hwmod_class,
@@ -1505,6 +1522,8 @@ static struct omap_hwmod omap2430_dss_venc_hwmod = {
.module_offs = CORE_MOD,
},
},
+ .opt_clks = venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(venc_opt_clks),
.slaves = omap2430_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 19/28] OMAP4: HWMOD: change DSS main_clk scheme
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (17 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 18/28] OMAP2430: " Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support Tomi Valkeinen
` (9 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Currently using pm_runtime with DSS requires the DSS driver to enable
the DSS functional clock before calling pm_runtime_get(). That makes it
impossible to use pm_runtime in DSS as it is meant to be used, with
pm_runtime callbacks.
This patch changes the hwmod database for OMAP4 so that enabling the
hwmod via pm_runtime will also enable the DSS functional clock, allowing
us to use pm_runtime properly in DSS driver.
The DSS HWMOD side is not really correct, not before nor after this
patch, and getting DSS to retention will probably not work currently.
However, it is not supported in the mainline kernel anyway, so this
won't break anything.
So this patch allows us to write the pm_runtime adaptation for the DSS
driver the way it should be done, and the HWMOD/PM side can be fixed
later.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 28 ++++++++++++++--------------
1 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 4f6ae94..857bdda 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1133,7 +1133,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1173,7 +1173,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = {
static struct omap_hwmod omap44xx_dss_hwmod = {
.name = "dss_core",
.class = &omap44xx_dss_hwmod_class,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
@@ -1233,7 +1233,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dispc_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dispc_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1282,7 +1282,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_irqs),
.sdma_reqs = omap44xx_dss_dispc_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_sdma_reqs),
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
@@ -1338,7 +1338,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi1_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dsi1_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1380,7 +1380,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_irqs),
.sdma_reqs = omap44xx_dss_dsi1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_sdma_reqs),
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
@@ -1415,7 +1415,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi2_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_dsi2_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1452,7 +1452,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_irqs),
.sdma_reqs = omap44xx_dss_dsi2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_sdma_reqs),
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
@@ -1505,7 +1505,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hdmi_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_hdmi_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1547,7 +1547,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_irqs),
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_sdma_reqs),
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
@@ -1598,7 +1598,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_rfbi_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_rfbi_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1637,7 +1637,7 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
.class = &omap44xx_rfbi_hwmod_class,
.sdma_reqs = omap44xx_dss_rfbi_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_sdma_reqs),
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
@@ -1673,7 +1673,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_venc_hwmod,
- .clk = "l3_div_ck",
+ .clk = "dss_fck",
.addr = omap44xx_dss_venc_dma_addrs,
.addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_dma_addrs),
.user = OCP_USER_SDMA,
@@ -1710,7 +1710,7 @@ static struct omap_hwmod_opt_clk venc_opt_clks[] = {
static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
- .main_clk = "dss_fck",
+ .main_clk = "dss_dss_clk",
.prcm = {
.omap4 = {
.clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (18 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 19/28] OMAP4: HWMOD: change DSS main_clk scheme Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 20:03 ` Paul Mundt
2011-06-21 14:49 ` Kevin Hilman
2011-06-09 13:56 ` [PATCHv2 21/28] OMAP4: HWMOD: Remove unneeded DSS opt clocks Tomi Valkeinen
` (8 subsequent siblings)
28 siblings, 2 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Use PM runtime and HWMOD support to handle enabling and disabling of DSS
modules.
Each DSS module will have get and put functions which can be used to
enable and disable that module. The functions use pm_runtime and hwmod
opt-clocks to enable the hardware.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 326 ++++++++++++++++++++++----------
drivers/video/omap2/dss/dpi.c | 70 +++++---
drivers/video/omap2/dss/dsi.c | 244 +++++++++++++++---------
drivers/video/omap2/dss/dss.c | 376 ++++++++-----------------------------
drivers/video/omap2/dss/dss.h | 33 ++--
drivers/video/omap2/dss/hdmi.c | 161 ++++++++++++----
drivers/video/omap2/dss/manager.c | 8 +-
drivers/video/omap2/dss/overlay.c | 24 ++-
drivers/video/omap2/dss/rfbi.c | 110 +++++++++--
drivers/video/omap2/dss/sdi.c | 40 +++--
drivers/video/omap2/dss/venc.c | 165 ++++++++++++++---
11 files changed, 923 insertions(+), 634 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index ee2052f..3f2265f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -34,6 +34,7 @@
#include <linux/hardirq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <plat/sram.h>
#include <plat/clock.h>
@@ -93,7 +94,11 @@ struct dispc_irq_stats {
static struct {
struct platform_device *pdev;
void __iomem *base;
+
+ int ctx_loss_cnt;
+
int irq;
+ struct clk *dss_clk;
u32 fifo_size[3];
@@ -140,13 +145,12 @@ static inline u32 dispc_read_reg(const u16 idx)
#define RR(reg) \
dispc_write_reg(DISPC_##reg, dispc.ctx[DISPC_##reg / sizeof(u32)])
-void dispc_save_context(void)
+static void dispc_save_context(void)
{
int i;
- if (cpu_is_omap24xx())
- return;
- SR(SYSCONFIG);
+ DSSDBG("dispc_save_context\n");
+
SR(IRQENABLE);
SR(CONTROL);
SR(CONFIG);
@@ -314,10 +318,12 @@ void dispc_save_context(void)
SR(DIVISOR);
}
-void dispc_restore_context(void)
+static void dispc_restore_context(void)
{
int i;
- RR(SYSCONFIG);
+
+ DSSDBG("dispc_restore_context\n");
+
/*RR(IRQENABLE);*/
/*RR(CONTROL);*/
RR(CONFIG);
@@ -501,14 +507,82 @@ void dispc_restore_context(void)
#undef SR
#undef RR
-static inline void enable_clocks(bool enable)
+static void dispc_init_ctx_loss_count(void)
{
- if (enable)
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
- else
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ struct device *dev = &dispc.pdev->dev;
+ struct omap_display_platform_data *pdata = dev->platform_data;
+ struct omap_dss_board_info *board_data = pdata->board_data;
+ int cnt = 0;
+
+ /*
+ * get_context_loss_count returns negative on error. We'll ignore the
+ * error and store the error to ctx_loss_cnt, which will cause
+ * dispc_need_ctx_restore() call to return true.
+ */
+
+ if (board_data->get_context_loss_count)
+ cnt = board_data->get_context_loss_count(dev);
+
+ WARN_ON(cnt < 0);
+
+ dispc.ctx_loss_cnt = cnt;
+
+ DSSDBG("initial ctx_loss_cnt %u\n", cnt);
+}
+
+static bool dispc_need_ctx_restore(void)
+{
+ struct device *dev = &dispc.pdev->dev;
+ struct omap_display_platform_data *pdata = dev->platform_data;
+ struct omap_dss_board_info *board_data = pdata->board_data;
+ int cnt;
+
+ /*
+ * If get_context_loss_count is not available, assume that we need
+ * context restore always.
+ */
+ if (!board_data->get_context_loss_count)
+ return true;
+
+ cnt = board_data->get_context_loss_count(dev);
+ if (cnt < 0) {
+ dev_err(dev, "getting context loss count failed, will force "
+ "context restore\n");
+ dispc.ctx_loss_cnt = cnt;
+ return true;
+ }
+
+ if (cnt = dispc.ctx_loss_cnt)
+ return false;
+
+ DSSDBG("ctx_loss_cnt %d -> %d\n", dispc.ctx_loss_cnt, cnt);
+ dispc.ctx_loss_cnt = cnt;
+
+ return true;
+}
+
+int dispc_runtime_get(void)
+{
+ int r;
+
+ DSSDBG("dispc_runtime_get\n");
+
+ r = pm_runtime_get_sync(&dispc.pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
+}
+
+void dispc_runtime_put(void)
+{
+ int r;
+
+ DSSDBG("dispc_runtime_put\n");
+
+ r = pm_runtime_put(&dispc.pdev->dev);
+ WARN_ON(r < 0);
}
+
bool dispc_go_busy(enum omap_channel channel)
{
int bit;
@@ -530,7 +604,7 @@ void dispc_go(enum omap_channel channel)
int bit;
bool enable_bit, go_bit;
- enable_clocks(1);
+ dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD ||
channel = OMAP_DSS_CHANNEL_LCD2)
@@ -571,7 +645,7 @@ void dispc_go(enum omap_channel channel)
else
REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit);
end:
- enable_clocks(0);
+ dispc_runtime_put();
}
static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value)
@@ -998,7 +1072,7 @@ void dispc_set_burst_size(enum omap_plane plane,
int shift;
u32 val;
- enable_clocks(1);
+ dispc_runtime_get();
switch (plane) {
case OMAP_DSS_GFX:
@@ -1017,7 +1091,7 @@ void dispc_set_burst_size(enum omap_plane plane,
val = FLD_MOD(val, burst_size, shift+1, shift);
dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_enable_gamma_table(bool enable)
@@ -1054,9 +1128,9 @@ void dispc_enable_replication(enum omap_plane plane, bool enable)
else
bit = 10;
- enable_clocks(1);
+ dispc_runtime_get();
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, bit, bit);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
@@ -1064,9 +1138,9 @@ void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
u32 val;
BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
- enable_clocks(1);
+ dispc_runtime_get();
dispc_write_reg(DISPC_SIZE_MGR(channel), val);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_set_digit_size(u16 width, u16 height)
@@ -1074,9 +1148,9 @@ void dispc_set_digit_size(u16 width, u16 height)
u32 val;
BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
- enable_clocks(1);
+ dispc_runtime_get();
dispc_write_reg(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT), val);
- enable_clocks(0);
+ dispc_runtime_put();
}
static void dispc_read_plane_fifo_sizes(void)
@@ -1085,7 +1159,7 @@ static void dispc_read_plane_fifo_sizes(void)
int plane;
u8 start, end;
- enable_clocks(1);
+ dispc_runtime_get();
dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end);
@@ -1095,7 +1169,7 @@ static void dispc_read_plane_fifo_sizes(void)
dispc.fifo_size[plane] = size;
}
- enable_clocks(0);
+ dispc_runtime_put();
}
u32 dispc_get_plane_fifo_size(enum omap_plane plane)
@@ -1110,7 +1184,7 @@ void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high)
dss_feat_get_reg_field(FEAT_REG_FIFOHIGHTHRESHOLD, &hi_start, &hi_end);
dss_feat_get_reg_field(FEAT_REG_FIFOLOWTHRESHOLD, &lo_start, &lo_end);
- enable_clocks(1);
+ dispc_runtime_get();
DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n",
plane,
@@ -1124,17 +1198,17 @@ void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high)
FLD_VAL(high, hi_start, hi_end) |
FLD_VAL(low, lo_start, lo_end));
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_enable_fifomerge(bool enable)
{
- enable_clocks(1);
+ dispc_runtime_get();
DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled");
REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
- enable_clocks(0);
+ dispc_runtime_put();
}
static void _dispc_set_fir(enum omap_plane plane,
@@ -1756,9 +1830,9 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out)
{
- enable_clocks(1);
+ dispc_runtime_get();
_dispc_set_channel_out(plane, channel_out);
- enable_clocks(0);
+ dispc_runtime_put();
}
static int _dispc_setup_plane(enum omap_plane plane,
@@ -1954,7 +2028,7 @@ static void dispc_enable_lcd_out(enum omap_channel channel, bool enable)
int r;
u32 irq;
- enable_clocks(1);
+ dispc_runtime_get();
/* When we disable LCD output, we need to wait until frame is done.
* Otherwise the DSS is still working, and turning off the clocks
@@ -1990,7 +2064,7 @@ static void dispc_enable_lcd_out(enum omap_channel channel, bool enable)
DSSERR("failed to unregister FRAMEDONE isr\n");
}
- enable_clocks(0);
+ dispc_runtime_put();
}
static void _enable_digit_out(bool enable)
@@ -2003,10 +2077,10 @@ static void dispc_enable_digit_out(bool enable)
struct completion frame_done_completion;
int r;
- enable_clocks(1);
+ dispc_runtime_get();
if (REG_GET(DISPC_CONTROL, 1, 1) = enable) {
- enable_clocks(0);
+ dispc_runtime_put();
return;
}
@@ -2061,7 +2135,7 @@ static void dispc_enable_digit_out(bool enable)
spin_unlock_irqrestore(&dispc.irq_lock, flags);
}
- enable_clocks(0);
+ dispc_runtime_put();
}
bool dispc_is_channel_enabled(enum omap_channel channel)
@@ -2092,9 +2166,9 @@ void dispc_lcd_enable_signal_polarity(bool act_high)
if (!dss_has_feature(FEAT_LCDENABLEPOL))
return;
- enable_clocks(1);
+ dispc_runtime_get();
REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_lcd_enable_signal(bool enable)
@@ -2102,9 +2176,9 @@ void dispc_lcd_enable_signal(bool enable)
if (!dss_has_feature(FEAT_LCDENABLESIGNAL))
return;
- enable_clocks(1);
+ dispc_runtime_get();
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_pck_free_enable(bool enable)
@@ -2112,19 +2186,19 @@ void dispc_pck_free_enable(bool enable)
if (!dss_has_feature(FEAT_PCKFREEENABLE))
return;
- enable_clocks(1);
+ dispc_runtime_get();
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_enable_fifohandcheck(enum omap_channel channel, bool enable)
{
- enable_clocks(1);
+ dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONFIG2, enable ? 1 : 0, 16, 16);
else
REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16);
- enable_clocks(0);
+ dispc_runtime_put();
}
@@ -2147,27 +2221,27 @@ void dispc_set_lcd_display_type(enum omap_channel channel,
return;
}
- enable_clocks(1);
+ dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONTROL2, mode, 3, 3);
else
REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_set_loadmode(enum omap_dss_load_mode mode)
{
- enable_clocks(1);
+ dispc_runtime_get();
REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_set_default_color(enum omap_channel channel, u32 color)
{
- enable_clocks(1);
+ dispc_runtime_get();
dispc_write_reg(DISPC_DEFAULT_COLOR(channel), color);
- enable_clocks(0);
+ dispc_runtime_put();
}
u32 dispc_get_default_color(enum omap_channel channel)
@@ -2178,9 +2252,9 @@ u32 dispc_get_default_color(enum omap_channel channel)
channel != OMAP_DSS_CHANNEL_LCD &&
channel != OMAP_DSS_CHANNEL_LCD2);
- enable_clocks(1);
+ dispc_runtime_get();
l = dispc_read_reg(DISPC_DEFAULT_COLOR(channel));
- enable_clocks(0);
+ dispc_runtime_put();
return l;
}
@@ -2189,7 +2263,7 @@ void dispc_set_trans_key(enum omap_channel ch,
enum omap_dss_trans_key_type type,
u32 trans_key)
{
- enable_clocks(1);
+ dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, type, 11, 11);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
@@ -2198,14 +2272,14 @@ void dispc_set_trans_key(enum omap_channel ch,
REG_FLD_MOD(DISPC_CONFIG2, type, 11, 11);
dispc_write_reg(DISPC_TRANS_COLOR(ch), trans_key);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_get_trans_key(enum omap_channel ch,
enum omap_dss_trans_key_type *type,
u32 *trans_key)
{
- enable_clocks(1);
+ dispc_runtime_get();
if (type) {
if (ch = OMAP_DSS_CHANNEL_LCD)
*type = REG_GET(DISPC_CONFIG, 11, 11);
@@ -2219,33 +2293,33 @@ void dispc_get_trans_key(enum omap_channel ch,
if (trans_key)
*trans_key = dispc_read_reg(DISPC_TRANS_COLOR(ch));
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_enable_trans_key(enum omap_channel ch, bool enable)
{
- enable_clocks(1);
+ dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12);
else /* OMAP_DSS_CHANNEL_LCD2 */
REG_FLD_MOD(DISPC_CONFIG2, enable, 10, 10);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_enable_alpha_blending(enum omap_channel ch, bool enable)
{
if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
return;
- enable_clocks(1);
+ dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19);
else /* OMAP_DSS_CHANNEL_LCD2 */
REG_FLD_MOD(DISPC_CONFIG2, enable, 18, 18);
- enable_clocks(0);
+ dispc_runtime_put();
}
bool dispc_alpha_blending_enabled(enum omap_channel ch)
{
@@ -2254,7 +2328,7 @@ bool dispc_alpha_blending_enabled(enum omap_channel ch)
if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
return false;
- enable_clocks(1);
+ dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
enabled = REG_GET(DISPC_CONFIG, 18, 18);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
@@ -2263,7 +2337,7 @@ bool dispc_alpha_blending_enabled(enum omap_channel ch)
enabled = REG_GET(DISPC_CONFIG2, 18, 18);
else
BUG();
- enable_clocks(0);
+ dispc_runtime_put();
return enabled;
}
@@ -2273,7 +2347,7 @@ bool dispc_trans_key_enabled(enum omap_channel ch)
{
bool enabled;
- enable_clocks(1);
+ dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
enabled = REG_GET(DISPC_CONFIG, 10, 10);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
@@ -2282,7 +2356,7 @@ bool dispc_trans_key_enabled(enum omap_channel ch)
enabled = REG_GET(DISPC_CONFIG2, 10, 10);
else
BUG();
- enable_clocks(0);
+ dispc_runtime_put();
return enabled;
}
@@ -2310,12 +2384,12 @@ void dispc_set_tft_data_lines(enum omap_channel channel, u8 data_lines)
return;
}
- enable_clocks(1);
+ dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONTROL2, code, 9, 8);
else
REG_FLD_MOD(DISPC_CONTROL, code, 9, 8);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_set_parallel_interface_mode(enum omap_channel channel,
@@ -2347,7 +2421,7 @@ void dispc_set_parallel_interface_mode(enum omap_channel channel,
return;
}
- enable_clocks(1);
+ dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2) {
l = dispc_read_reg(DISPC_CONTROL2);
@@ -2361,7 +2435,7 @@ void dispc_set_parallel_interface_mode(enum omap_channel channel,
dispc_write_reg(DISPC_CONTROL, l);
}
- enable_clocks(0);
+ dispc_runtime_put();
}
static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
@@ -2414,10 +2488,10 @@ static void _dispc_set_lcd_timings(enum omap_channel channel, int hsw,
FLD_VAL(vbp, 31, 20);
}
- enable_clocks(1);
+ dispc_runtime_get();
dispc_write_reg(DISPC_TIMING_H(channel), timing_h);
dispc_write_reg(DISPC_TIMING_V(channel), timing_v);
- enable_clocks(0);
+ dispc_runtime_put();
}
/* change name to mode? */
@@ -2460,10 +2534,10 @@ static void dispc_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
BUG_ON(lck_div < 1);
BUG_ON(pck_div < 2);
- enable_clocks(1);
+ dispc_runtime_get();
dispc_write_reg(DISPC_DIVISORo(channel),
FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
- enable_clocks(0);
+ dispc_runtime_put();
}
static void dispc_get_lcd_divisor(enum omap_channel channel, int *lck_div,
@@ -2482,7 +2556,7 @@ unsigned long dispc_fclk_rate(void)
switch (dss_get_dispc_clk_source()) {
case OMAP_DSS_CLK_SRC_FCK:
- r = dss_clk_get_rate(DSS_CLK_FCK);
+ r = clk_get_rate(dispc.dss_clk);
break;
case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
dsidev = dsi_get_dsidev_from_id(0);
@@ -2512,7 +2586,7 @@ unsigned long dispc_lclk_rate(enum omap_channel channel)
switch (dss_get_lcd_clk_source(channel)) {
case OMAP_DSS_CLK_SRC_FCK:
- r = dss_clk_get_rate(DSS_CLK_FCK);
+ r = clk_get_rate(dispc.dss_clk);
break;
case OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC:
dsidev = dsi_get_dsidev_from_id(0);
@@ -2551,7 +2625,8 @@ void dispc_dump_clocks(struct seq_file *s)
enum omap_dss_clk_source dispc_clk_src = dss_get_dispc_clk_source();
enum omap_dss_clk_source lcd_clk_src;
- enable_clocks(1);
+ if (dispc_runtime_get())
+ return;
seq_printf(s, "- DISPC -\n");
@@ -2599,7 +2674,8 @@ void dispc_dump_clocks(struct seq_file *s)
seq_printf(s, "pck\t\t%-16lupck div\t%u\n",
dispc_pclk_rate(OMAP_DSS_CHANNEL_LCD2), pcd);
}
- enable_clocks(0);
+
+ dispc_runtime_put();
}
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
@@ -2654,7 +2730,8 @@ void dispc_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-50s %08x\n", #r, dispc_read_reg(r))
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ if (dispc_runtime_get())
+ return;
DUMPREG(DISPC_REVISION);
DUMPREG(DISPC_SYSCONFIG);
@@ -2899,7 +2976,7 @@ void dispc_dump_regs(struct seq_file *s)
DUMPREG(DISPC_OVL_PRELOAD(OMAP_DSS_VIDEO2));
}
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ dispc_runtime_put();
#undef DUMPREG
}
@@ -2920,9 +2997,9 @@ static void _dispc_set_pol_freq(enum omap_channel channel, bool onoff, bool rf,
l |= FLD_VAL(acbi, 11, 8);
l |= FLD_VAL(acb, 7, 0);
- enable_clocks(1);
+ dispc_runtime_get();
dispc_write_reg(DISPC_POL_FREQ(channel), l);
- enable_clocks(0);
+ dispc_runtime_put();
}
void dispc_set_pol_freq(enum omap_channel channel,
@@ -3043,7 +3120,7 @@ static void _omap_dispc_set_irqs(void)
mask |= isr_data->mask;
}
- enable_clocks(1);
+ dispc_runtime_get();
old_mask = dispc_read_reg(DISPC_IRQENABLE);
/* clear the irqstatus for newly enabled irqs */
@@ -3051,7 +3128,7 @@ static void _omap_dispc_set_irqs(void)
dispc_write_reg(DISPC_IRQENABLE, mask);
- enable_clocks(0);
+ dispc_runtime_put();
}
int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
@@ -3560,13 +3637,6 @@ static void _omap_dispc_initial_config(void)
{
u32 l;
- l = dispc_read_reg(DISPC_SYSCONFIG);
- l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */
- l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */
- l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */
- l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */
- dispc_write_reg(DISPC_SYSCONFIG, l);
-
/* Exclusively enable DISPC_CORE_CLK and set divider to 1 */
if (dss_has_feature(FEAT_CORE_CLK_DIV)) {
l = dispc_read_reg(DISPC_DIVISOR);
@@ -3596,9 +3666,9 @@ int dispc_enable_plane(enum omap_plane plane, bool enable)
{
DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
- enable_clocks(1);
+ dispc_runtime_get();
_dispc_enable_plane(plane, enable);
- enable_clocks(0);
+ dispc_runtime_put();
return 0;
}
@@ -3625,7 +3695,7 @@ int dispc_setup_plane(enum omap_plane plane,
ilace, color_mode,
rotation, mirror, channel);
- enable_clocks(1);
+ dispc_runtime_get();
r = _dispc_setup_plane(plane,
paddr, screen_width,
@@ -3639,7 +3709,7 @@ int dispc_setup_plane(enum omap_plane plane,
pre_mult_alpha,
channel, puv_addr);
- enable_clocks(0);
+ dispc_runtime_put();
return r;
}
@@ -3650,9 +3720,19 @@ static int omap_dispchw_probe(struct platform_device *pdev)
u32 rev;
int r = 0;
struct resource *dispc_mem;
+ struct clk *clk;
dispc.pdev = pdev;
+ clk = clk_get(&pdev->dev, "dss_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get dss_clk\n");
+ r = PTR_ERR(clk);
+ goto err_get_clk;
+ }
+
+ dispc.dss_clk = clk;
+
spin_lock_init(&dispc.irq_lock);
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
@@ -3666,62 +3746,106 @@ static int omap_dispchw_probe(struct platform_device *pdev)
if (!dispc_mem) {
DSSERR("can't get IORESOURCE_MEM DISPC\n");
r = -EINVAL;
- goto fail0;
+ goto err_ioremap;
}
dispc.base = ioremap(dispc_mem->start, resource_size(dispc_mem));
if (!dispc.base) {
DSSERR("can't ioremap DISPC\n");
r = -ENOMEM;
- goto fail0;
+ goto err_ioremap;
}
dispc.irq = platform_get_irq(dispc.pdev, 0);
if (dispc.irq < 0) {
DSSERR("platform_get_irq failed\n");
r = -ENODEV;
- goto fail1;
+ goto err_irq;
}
r = request_irq(dispc.irq, omap_dispc_irq_handler, IRQF_SHARED,
"OMAP DISPC", dispc.pdev);
if (r < 0) {
DSSERR("request_irq failed\n");
- goto fail1;
+ goto err_irq;
}
- enable_clocks(1);
+ dispc_init_ctx_loss_count();
+
+ pm_runtime_enable(&pdev->dev);
+
+ r = dispc_runtime_get();
+ if (r)
+ goto err_runtime_get;
_omap_dispc_initial_config();
_omap_dispc_initialize_irq();
- dispc_save_context();
-
rev = dispc_read_reg(DISPC_REVISION);
dev_dbg(&pdev->dev, "OMAP DISPC rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
- enable_clocks(0);
+ dispc_runtime_put();
return 0;
-fail1:
+
+err_runtime_get:
+ pm_runtime_disable(&pdev->dev);
+ free_irq(dispc.irq, dispc.pdev);
+err_irq:
iounmap(dispc.base);
-fail0:
+err_ioremap:
+ clk_put(dispc.dss_clk);
+err_get_clk:
return r;
}
static int omap_dispchw_remove(struct platform_device *pdev)
{
+ pm_runtime_disable(&pdev->dev);
+
+ clk_put(dispc.dss_clk);
+
free_irq(dispc.irq, dispc.pdev);
iounmap(dispc.base);
return 0;
}
+static int dispc_runtime_suspend(struct device *dev)
+{
+ dispc_save_context();
+ clk_disable(dispc.dss_clk);
+ dss_runtime_put();
+
+ return 0;
+}
+
+static int dispc_runtime_resume(struct device *dev)
+{
+ int r;
+
+ r = dss_runtime_get();
+ if (r < 0)
+ return r;
+
+ clk_enable(dispc.dss_clk);
+ if (dispc_need_ctx_restore())
+ dispc_restore_context();
+
+ return 0;
+}
+
+static const struct dev_pm_ops dispc_pm_ops = {
+ .runtime_suspend = dispc_runtime_suspend,
+ .runtime_resume = dispc_runtime_resume,
+};
+
static struct platform_driver omap_dispchw_driver = {
.probe = omap_dispchw_probe,
.remove = omap_dispchw_remove,
.driver = {
.name = "omapdss_dispc",
.owner = THIS_MODULE,
+ .pm = &dispc_pm_ops,
},
};
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index bab55cd..f053b18 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -23,7 +23,6 @@
#define DSS_SUBSYS_NAME "DPI"
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
@@ -130,8 +129,6 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
bool is_tft;
int r = 0;
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
-
dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
@@ -144,7 +141,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
r = dpi_set_dispc_clk(dssdev, is_tft, t->pixel_clock * 1000,
&fck, &lck_div, &pck_div);
if (r)
- goto err0;
+ return r;
pck = fck / lck_div / pck_div / 1000;
@@ -158,12 +155,10 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
dispc_set_lcd_timings(dssdev->manager->id, t);
-err0:
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
- return r;
+ return 0;
}
-static int dpi_basic_init(struct omap_dss_device *dssdev)
+static void dpi_basic_init(struct omap_dss_device *dssdev)
{
bool is_tft;
@@ -175,8 +170,6 @@ static int dpi_basic_init(struct omap_dss_device *dssdev)
OMAP_DSS_LCD_DISPLAY_TFT : OMAP_DSS_LCD_DISPLAY_STN);
dispc_set_tft_data_lines(dssdev->manager->id,
dssdev->phy.dpi.data_lines);
-
- return 0;
}
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
@@ -186,30 +179,38 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
- goto err0;
+ goto err_start_dev;
}
if (cpu_is_omap34xx()) {
r = regulator_enable(dpi.vdds_dsi_reg);
if (r)
- goto err1;
+ goto err_reg_enable;
}
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ r = dss_runtime_get();
+ if (r)
+ goto err_get_dss;
- r = dpi_basic_init(dssdev);
+ r = dispc_runtime_get();
if (r)
- goto err2;
+ goto err_get_dispc;
+
+ dpi_basic_init(dssdev);
if (dpi_use_dsi_pll(dssdev)) {
+ r = dsi_runtime_get(dpi.dsidev);
+ if (r)
+ goto err_get_dsi;
+
r = dsi_pll_init(dpi.dsidev, 0, 1);
if (r)
- goto err2;
+ goto err_dsi_pll_init;
}
r = dpi_set_mode(dssdev);
if (r)
- goto err3;
+ goto err_set_mode;
mdelay(2);
@@ -217,16 +218,22 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
return 0;
-err3:
+err_set_mode:
if (dpi_use_dsi_pll(dssdev))
dsi_pll_uninit(dpi.dsidev, true);
-err2:
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+err_dsi_pll_init:
+ if (dpi_use_dsi_pll(dssdev))
+ dsi_runtime_put(dpi.dsidev);
+err_get_dsi:
+ dispc_runtime_put();
+err_get_dispc:
+ dss_runtime_put();
+err_get_dss:
if (cpu_is_omap34xx())
regulator_disable(dpi.vdds_dsi_reg);
-err1:
+err_reg_enable:
omap_dss_stop_device(dssdev);
-err0:
+err_start_dev:
return r;
}
EXPORT_SYMBOL(omapdss_dpi_display_enable);
@@ -238,9 +245,11 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
if (dpi_use_dsi_pll(dssdev)) {
dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
dsi_pll_uninit(dpi.dsidev, true);
+ dsi_runtime_put(dpi.dsidev);
}
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ dispc_runtime_put();
+ dss_runtime_put();
if (cpu_is_omap34xx())
regulator_disable(dpi.vdds_dsi_reg);
@@ -252,11 +261,26 @@ EXPORT_SYMBOL(omapdss_dpi_display_disable);
void dpi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
+ int r;
+
DSSDBG("dpi_set_timings\n");
dssdev->panel.timings = *timings;
if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE) {
+ r = dss_runtime_get();
+ if (r)
+ return;
+
+ r = dispc_runtime_get();
+ if (r) {
+ dss_runtime_put();
+ return;
+ }
+
dpi_set_mode(dssdev);
dispc_go(dssdev->manager->id);
+
+ dispc_runtime_put();
+ dss_runtime_put();
}
}
EXPORT_SYMBOL(dpi_set_timings);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 0609885..b6a57bb 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -36,6 +36,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
+#include <linux/pm_runtime.h>
#include <video/omapdss.h>
#include <plat/clock.h>
@@ -267,8 +268,12 @@ struct dsi_isr_tables {
struct dsi_data {
struct platform_device *pdev;
void __iomem *base;
+
int irq;
+ struct clk *dss_clk;
+ struct clk *sys_clk;
+
void (*dsi_mux_pads)(bool enable);
struct dsi_clock_info current_cinfo;
@@ -389,15 +394,6 @@ static inline u32 dsi_read_reg(struct platform_device *dsidev,
return __raw_readl(dsi->base + idx.idx);
}
-
-void dsi_save_context(void)
-{
-}
-
-void dsi_restore_context(void)
-{
-}
-
void dsi_bus_lock(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -1048,13 +1044,27 @@ static u32 dsi_get_errors(struct platform_device *dsidev)
return e;
}
-/* DSI func clock. this could also be dsi_pll_hsdiv_dsi_clk */
-static inline void enable_clocks(bool enable)
+int dsi_runtime_get(struct platform_device *dsidev)
{
- if (enable)
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
- else
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ int r;
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+ DSSDBG("dsi_runtime_get\n");
+
+ r = pm_runtime_get_sync(&dsi->pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
+}
+
+void dsi_runtime_put(struct platform_device *dsidev)
+{
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ int r;
+
+ DSSDBG("dsi_runtime_put\n");
+
+ r = pm_runtime_put(&dsi->pdev->dev);
+ WARN_ON(r < 0);
}
/* source clock for DSI PLL. this could also be PCLKFREE */
@@ -1064,9 +1074,9 @@ static inline void dsi_enable_pll_clock(struct platform_device *dsidev,
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (enable)
- dss_clk_enable(DSS_CLK_SYSCK);
+ clk_enable(dsi->sys_clk);
else
- dss_clk_disable(DSS_CLK_SYSCK);
+ clk_disable(dsi->sys_clk);
if (enable && dsi->pll_locked) {
if (wait_for_bit_change(dsidev, DSI_PLL_STATUS, 1, 1) != 1)
@@ -1159,10 +1169,11 @@ static unsigned long dsi_fclk_rate(struct platform_device *dsidev)
{
unsigned long r;
int dsi_module = dsi_get_dsidev_id(dsidev);
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
if (dss_get_dsi_clk_source(dsi_module) = OMAP_DSS_CLK_SRC_FCK) {
/* DSI FCLK source is DSS_CLK_FCK */
- r = dss_clk_get_rate(DSS_CLK_FCK);
+ r = clk_get_rate(dsi->dss_clk);
} else {
/* DSI FCLK source is dsi_pll_hsdiv_dsi_clk */
r = dsi_get_pll_hsdiv_dsi_rate(dsidev);
@@ -1271,7 +1282,7 @@ static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
return -EINVAL;
if (cinfo->use_sys_clk) {
- cinfo->clkin = dss_clk_get_rate(DSS_CLK_SYSCK);
+ cinfo->clkin = clk_get_rate(dsi->sys_clk);
/* XXX it is unclear if highfreq should be used
* with DSS_SYS_CLK source also */
cinfo->highfreq = 0;
@@ -1320,7 +1331,7 @@ int dsi_pll_calc_clock_div_pck(struct platform_device *dsidev, bool is_tft,
int match = 0;
unsigned long dss_sys_clk, max_dss_fck;
- dss_sys_clk = dss_clk_get_rate(DSS_CLK_SYSCK);
+ dss_sys_clk = clk_get_rate(dsi->sys_clk);
max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
@@ -1610,7 +1621,6 @@ int dsi_pll_init(struct platform_device *dsidev, bool enable_hsclk,
dsi->vdds_dsi_reg = vdds_dsi;
}
- enable_clocks(1);
dsi_enable_pll_clock(dsidev, 1);
/*
* Note: SCP CLK is not required on OMAP3, but it is required on OMAP4.
@@ -1662,7 +1672,6 @@ err1:
}
err0:
dsi_disable_scp_clk(dsidev);
- enable_clocks(0);
dsi_enable_pll_clock(dsidev, 0);
return r;
}
@@ -1680,7 +1689,6 @@ void dsi_pll_uninit(struct platform_device *dsidev, bool disconnect_lanes)
}
dsi_disable_scp_clk(dsidev);
- enable_clocks(0);
dsi_enable_pll_clock(dsidev, 0);
DSSDBG("PLL uninit done\n");
@@ -1697,7 +1705,8 @@ static void dsi_dump_dsidev_clocks(struct platform_device *dsidev,
dispc_clk_src = dss_get_dispc_clk_source();
dsi_clk_src = dss_get_dsi_clk_source(dsi_module);
- enable_clocks(1);
+ if (dsi_runtime_get(dsidev))
+ return;
seq_printf(s, "- DSI%d PLL -\n", dsi_module + 1);
@@ -1740,7 +1749,7 @@ static void dsi_dump_dsidev_clocks(struct platform_device *dsidev,
seq_printf(s, "LP_CLK\t\t%lu\n", cinfo->lp_clk);
- enable_clocks(0);
+ dsi_runtime_put(dsidev);
}
void dsi_dump_clocks(struct seq_file *s)
@@ -1882,7 +1891,8 @@ static void dsi_dump_dsidev_regs(struct platform_device *dsidev,
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(dsidev, r))
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ if (dsi_runtime_get(dsidev))
+ return;
dsi_enable_scp_clk(dsidev);
DUMPREG(DSI_REVISION);
@@ -1956,7 +1966,7 @@ static void dsi_dump_dsidev_regs(struct platform_device *dsidev,
DUMPREG(DSI_PLL_CONFIGURATION2);
dsi_disable_scp_clk(dsidev);
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ dsi_runtime_put(dsidev);
#undef DUMPREG
}
@@ -2472,28 +2482,6 @@ static void dsi_cio_uninit(struct platform_device *dsidev)
dsi->dsi_mux_pads(false);
}
-static int _dsi_wait_reset(struct platform_device *dsidev)
-{
- int t = 0;
-
- while (REG_GET(dsidev, DSI_SYSSTATUS, 0, 0) = 0) {
- if (++t > 5) {
- DSSERR("soft reset failed\n");
- return -ENODEV;
- }
- udelay(1);
- }
-
- return 0;
-}
-
-static int _dsi_reset(struct platform_device *dsidev)
-{
- /* Soft reset */
- REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 1, 1, 1);
- return _dsi_wait_reset(dsidev);
-}
-
static void dsi_config_tx_fifo(struct platform_device *dsidev,
enum fifo_size size1, enum fifo_size size2,
enum fifo_size size3, enum fifo_size size4)
@@ -4211,22 +4199,6 @@ static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
dsi_pll_uninit(dsidev, disconnect_lanes);
}
-static int dsi_core_init(struct platform_device *dsidev)
-{
- /* Autoidle */
- REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 1, 0, 0);
-
- /* ENWAKEUP */
- REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 1, 2, 2);
-
- /* SIDLEMODE smart-idle */
- REG_FLD_MOD(dsidev, DSI_SYSCONFIG, 2, 4, 3);
-
- _dsi_initialize_irq(dsidev);
-
- return 0;
-}
-
int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -4242,37 +4214,37 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
- goto err0;
+ goto err_start_dev;
}
- enable_clocks(1);
- dsi_enable_pll_clock(dsidev, 1);
-
- r = _dsi_reset(dsidev);
+ r = dsi_runtime_get(dsidev);
if (r)
- goto err1;
+ goto err_get_dsi;
+
+ dsi_enable_pll_clock(dsidev, 1);
- dsi_core_init(dsidev);
+ _dsi_initialize_irq(dsidev);
r = dsi_display_init_dispc(dssdev);
if (r)
- goto err1;
+ goto err_init_dispc;
r = dsi_display_init_dsi(dssdev);
if (r)
- goto err2;
+ goto err_init_dsi;
mutex_unlock(&dsi->lock);
return 0;
-err2:
+err_init_dsi:
dsi_display_uninit_dispc(dssdev);
-err1:
- enable_clocks(0);
+err_init_dispc:
dsi_enable_pll_clock(dsidev, 0);
+ dsi_runtime_put(dsidev);
+err_get_dsi:
omap_dss_stop_device(dssdev);
-err0:
+err_start_dev:
mutex_unlock(&dsi->lock);
DSSDBG("dsi_display_enable FAILED\n");
return r;
@@ -4295,7 +4267,7 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
dsi_display_uninit_dsi(dssdev, disconnect_lanes, enter_ulps);
- enable_clocks(0);
+ dsi_runtime_put(dsidev);
dsi_enable_pll_clock(dsidev, 0);
omap_dss_stop_device(dssdev);
@@ -4450,6 +4422,42 @@ static void dsi_calc_clock_param_ranges(struct platform_device *dsidev)
dsi->lpdiv_max = dss_feat_get_param_max(FEAT_PARAM_DSIPLL_LPDIV);
}
+static int dsi_get_clocks(struct platform_device *dsidev)
+{
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ struct clk *clk;
+
+ clk = clk_get(&dsidev->dev, "dss_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get dss_clk\n");
+ return PTR_ERR(clk);
+ }
+
+ dsi->dss_clk = clk;
+
+ clk = clk_get(&dsidev->dev, "sys_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get sys_clk\n");
+ clk_put(dsi->dss_clk);
+ dsi->dss_clk = NULL;
+ return PTR_ERR(clk);
+ }
+
+ dsi->sys_clk = clk;
+
+ return 0;
+}
+
+static void dsi_put_clocks(struct platform_device *dsidev)
+{
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+ if (dsi->dss_clk)
+ clk_put(dsi->dss_clk);
+ if (dsi->sys_clk)
+ clk_put(dsi->sys_clk);
+}
+
/* DSI1 HW IP initialisation */
static int omap_dsi1hw_probe(struct platform_device *dsidev)
{
@@ -4463,7 +4471,7 @@ static int omap_dsi1hw_probe(struct platform_device *dsidev)
dsi = kzalloc(sizeof(*dsi), GFP_KERNEL);
if (!dsi) {
r = -ENOMEM;
- goto err0;
+ goto err_alloc;
}
dsi->pdev = dsidev;
@@ -4486,6 +4494,12 @@ static int omap_dsi1hw_probe(struct platform_device *dsidev)
mutex_init(&dsi->lock);
sema_init(&dsi->bus_lock, 1);
+ r = dsi_get_clocks(dsidev);
+ if (r)
+ goto err_get_clk;
+
+ pm_runtime_enable(&dsidev->dev);
+
INIT_DELAYED_WORK_DEFERRABLE(&dsi->framedone_timeout_work,
dsi_framedone_timeout_work_callback);
@@ -4498,26 +4512,26 @@ static int omap_dsi1hw_probe(struct platform_device *dsidev)
if (!dsi_mem) {
DSSERR("can't get IORESOURCE_MEM DSI\n");
r = -EINVAL;
- goto err1;
+ goto err_ioremap;
}
dsi->base = ioremap(dsi_mem->start, resource_size(dsi_mem));
if (!dsi->base) {
DSSERR("can't ioremap DSI\n");
r = -ENOMEM;
- goto err1;
+ goto err_ioremap;
}
dsi->irq = platform_get_irq(dsi->pdev, 0);
if (dsi->irq < 0) {
DSSERR("platform_get_irq failed\n");
r = -ENODEV;
- goto err2;
+ goto err_get_irq;
}
r = request_irq(dsi->irq, omap_dsi_irq_handler, IRQF_SHARED,
dev_name(&dsidev->dev), dsi->pdev);
if (r < 0) {
DSSERR("request_irq failed\n");
- goto err2;
+ goto err_get_irq;
}
/* DSI VCs initialization */
@@ -4529,7 +4543,9 @@ static int omap_dsi1hw_probe(struct platform_device *dsidev)
dsi_calc_clock_param_ranges(dsidev);
- enable_clocks(1);
+ r = dsi_runtime_get(dsidev);
+ if (r)
+ goto err_get_dsi;
rev = dsi_read_reg(dsidev, DSI_REVISION);
dev_dbg(&dsidev->dev, "OMAP DSI rev %d.%d\n",
@@ -4537,14 +4553,19 @@ static int omap_dsi1hw_probe(struct platform_device *dsidev)
dsi->num_data_lanes = dsi_get_num_data_lanes(dsidev);
- enable_clocks(0);
+ dsi_runtime_put(dsidev);
return 0;
-err2:
+
+err_get_dsi:
+ free_irq(dsi->irq, dsi->pdev);
+err_get_irq:
iounmap(dsi->base);
-err1:
+err_ioremap:
+ pm_runtime_disable(&dsidev->dev);
+err_get_clk:
kfree(dsi);
-err0:
+err_alloc:
return r;
}
@@ -4554,6 +4575,10 @@ static int omap_dsi1hw_remove(struct platform_device *dsidev)
WARN_ON(dsi->scp_clk_refcount > 0);
+ pm_runtime_disable(&dsidev->dev);
+
+ dsi_put_clocks(dsidev);
+
if (dsi->vdds_dsi_reg != NULL) {
if (dsi->vdds_dsi_enabled) {
regulator_disable(dsi->vdds_dsi_reg);
@@ -4572,12 +4597,53 @@ static int omap_dsi1hw_remove(struct platform_device *dsidev)
return 0;
}
+static int dsi_runtime_suspend(struct device *dev)
+{
+ struct dsi_data *dsi = dsi_get_dsidrv_data(to_platform_device(dev));
+
+ clk_disable(dsi->dss_clk);
+
+ dispc_runtime_put();
+ dss_runtime_put();
+
+ return 0;
+}
+
+static int dsi_runtime_resume(struct device *dev)
+{
+ struct dsi_data *dsi = dsi_get_dsidrv_data(to_platform_device(dev));
+ int r;
+
+ r = dss_runtime_get();
+ if (r)
+ goto err_get_dss;
+
+ r = dispc_runtime_get();
+ if (r)
+ goto err_get_dispc;
+
+ clk_enable(dsi->dss_clk);
+
+ return 0;
+
+err_get_dispc:
+ dss_runtime_put();
+err_get_dss:
+ return r;
+}
+
+static const struct dev_pm_ops dsi_pm_ops = {
+ .runtime_suspend = dsi_runtime_suspend,
+ .runtime_resume = dsi_runtime_resume,
+};
+
static struct platform_driver omap_dsi1hw_driver = {
.probe = omap_dsi1hw_probe,
.remove = omap_dsi1hw_remove,
.driver = {
.name = "omapdss_dsi1",
.owner = THIS_MODULE,
+ .pm = &dsi_pm_ops,
},
};
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 810ea8c..4e36a07 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -29,6 +29,7 @@
#include <linux/seq_file.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <video/omapdss.h>
#include <plat/clock.h>
@@ -60,15 +61,11 @@ struct dss_reg {
static struct {
struct platform_device *pdev;
void __iomem *base;
+
int ctx_loss_cnt;
struct clk *dpll4_m4_ck;
- struct clk *dss_ick;
- struct clk *dss_fck;
- struct clk *dss_sys_clk;
- struct clk *dss_tv_fck;
- struct clk *dss_video_fck;
- unsigned num_clks_enabled;
+ struct clk *dss_clk;
unsigned long cache_req_pck;
unsigned long cache_prate;
@@ -88,13 +85,6 @@ static const char * const dss_generic_clk_source_names[] = {
[OMAP_DSS_CLK_SRC_FCK] = "DSS_FCK",
};
-static void dss_clk_enable_all_no_ctx(void);
-static void dss_clk_disable_all_no_ctx(void);
-static void dss_clk_enable_no_ctx(enum dss_clock clks);
-static void dss_clk_disable_no_ctx(enum dss_clock clks);
-
-static int _omap_dss_wait_reset(void);
-
static inline void dss_write_reg(const struct dss_reg idx, u32 val)
{
__raw_writel(val, dss.base + idx.idx);
@@ -110,12 +100,10 @@ static inline u32 dss_read_reg(const struct dss_reg idx)
#define RR(reg) \
dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)])
-void dss_save_context(void)
+static void dss_save_context(void)
{
- if (cpu_is_omap24xx())
- return;
+ DSSDBG("dss_save_context\n");
- SR(SYSCONFIG);
SR(CONTROL);
if (dss_feat_get_supported_displays(OMAP_DSS_CHANNEL_LCD) &
@@ -125,12 +113,10 @@ void dss_save_context(void)
}
}
-void dss_restore_context(void)
+static void dss_restore_context(void)
{
- if (_omap_dss_wait_reset())
- DSSERR("DSS not coming out of reset after sleep\n");
+ DSSDBG("dss_restore_context\n");
- RR(SYSCONFIG);
RR(CONTROL);
if (dss_feat_get_supported_displays(OMAP_DSS_CHANNEL_LCD) &
@@ -235,6 +221,7 @@ const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src)
return dss_generic_clk_source_names[clk_src];
}
+
void dss_dump_clocks(struct seq_file *s)
{
unsigned long dpll4_ck_rate;
@@ -242,13 +229,14 @@ void dss_dump_clocks(struct seq_file *s)
const char *fclk_name, *fclk_real_name;
unsigned long fclk_rate;
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ if (dss_runtime_get())
+ return;
seq_printf(s, "- DSS -\n");
fclk_name = dss_get_generic_clk_source_name(OMAP_DSS_CLK_SRC_FCK);
fclk_real_name = dss_feat_get_clk_source_name(OMAP_DSS_CLK_SRC_FCK);
- fclk_rate = dss_clk_get_rate(DSS_CLK_FCK);
+ fclk_rate = clk_get_rate(dss.dss_clk);
if (dss.dpll4_m4_ck) {
dpll4_ck_rate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck));
@@ -274,14 +262,15 @@ void dss_dump_clocks(struct seq_file *s)
fclk_rate);
}
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ dss_runtime_put();
}
void dss_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r))
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ if (dss_runtime_get())
+ return;
DUMPREG(DSS_REVISION);
DUMPREG(DSS_SYSCONFIG);
@@ -295,7 +284,7 @@ void dss_dump_regs(struct seq_file *s)
DUMPREG(DSS_SDI_STATUS);
}
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ dss_runtime_put();
#undef DUMPREG
}
@@ -438,7 +427,7 @@ int dss_calc_clock_rates(struct dss_clock_info *cinfo)
} else {
if (cinfo->fck_div != 0)
return -EINVAL;
- cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK);
+ cinfo->fck = clk_get_rate(dss.dss_clk);
}
return 0;
@@ -468,7 +457,7 @@ int dss_set_clock_div(struct dss_clock_info *cinfo)
int dss_get_clock_div(struct dss_clock_info *cinfo)
{
- cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK);
+ cinfo->fck = clk_get_rate(dss.dss_clk);
if (dss.dpll4_m4_ck) {
unsigned long prate;
@@ -513,7 +502,7 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
- fck = dss_clk_get_rate(DSS_CLK_FCK);
+ fck = clk_get_rate(dss.dss_clk);
if (req_pck = dss.cache_req_pck &&
((cpu_is_omap34xx() && prate = dss.cache_prate) ||
dss.cache_dss_cinfo.fck = fck)) {
@@ -540,7 +529,7 @@ retry:
if (dss.dpll4_m4_ck = NULL) {
struct dispc_clock_info cur_dispc;
/* XXX can we change the clock on omap2? */
- fck = dss_clk_get_rate(DSS_CLK_FCK);
+ fck = clk_get_rate(dss.dss_clk);
fck_div = 1;
dispc_find_clk_divs(is_tft, req_pck, fck, &cur_dispc);
@@ -617,28 +606,6 @@ found:
return 0;
}
-static int _omap_dss_wait_reset(void)
-{
- int t = 0;
-
- while (REG_GET(DSS_SYSSTATUS, 0, 0) = 0) {
- if (++t > 1000) {
- DSSERR("soft reset failed\n");
- return -ENODEV;
- }
- udelay(1);
- }
-
- return 0;
-}
-
-static int _omap_dss_reset(void)
-{
- /* Soft reset */
- REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1);
- return _omap_dss_wait_reset();
-}
-
void dss_set_venc_output(enum omap_dss_venc_type type)
{
int l = 0;
@@ -719,131 +686,45 @@ static bool dss_need_ctx_restore(void)
return true;
}
-static void save_all_ctx(void)
-{
- DSSDBG("save context\n");
-
- dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK);
-
- dss_save_context();
- dispc_save_context();
-#ifdef CONFIG_OMAP2_DSS_DSI
- dsi_save_context();
-#endif
-
- dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK);
-}
-
-static void restore_all_ctx(void)
-{
- DSSDBG("restore context\n");
-
- dss_clk_enable_all_no_ctx();
-
- dss_restore_context();
- dispc_restore_context();
-#ifdef CONFIG_OMAP2_DSS_DSI
- dsi_restore_context();
-#endif
-
- dss_clk_disable_all_no_ctx();
-}
-
-static int dss_get_clock(struct clk **clock, const char *clk_name)
-{
- struct clk *clk;
-
- clk = clk_get(&dss.pdev->dev, clk_name);
-
- if (IS_ERR(clk)) {
- DSSERR("can't get clock %s", clk_name);
- return PTR_ERR(clk);
- }
-
- *clock = clk;
-
- DSSDBG("clk %s, rate %ld\n", clk_name, clk_get_rate(clk));
-
- return 0;
-}
-
static int dss_get_clocks(void)
{
+ struct clk *clk;
int r;
- struct clk *dpll4_m4_ck;
- struct omap_display_platform_data *pdata = dss.pdev->dev.platform_data;
-
- dss.dss_ick = NULL;
- dss.dss_fck = NULL;
- dss.dss_sys_clk = NULL;
- dss.dss_tv_fck = NULL;
- dss.dss_video_fck = NULL;
-
- r = dss_get_clock(&dss.dss_ick, "ick");
- if (r)
- goto err;
- r = dss_get_clock(&dss.dss_fck, "fck");
- if (r)
- goto err;
-
- if (!pdata->opt_clock_available) {
- r = -ENODEV;
+ clk = clk_get(&dss.pdev->dev, "dss_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get clock dss_clk\n");
+ r = PTR_ERR(clk);
goto err;
}
- if (pdata->opt_clock_available("sys_clk")) {
- r = dss_get_clock(&dss.dss_sys_clk, "sys_clk");
- if (r)
- goto err;
- }
-
- if (pdata->opt_clock_available("tv_clk")) {
- r = dss_get_clock(&dss.dss_tv_fck, "tv_clk");
- if (r)
- goto err;
- }
-
- if (pdata->opt_clock_available("video_clk")) {
- r = dss_get_clock(&dss.dss_video_fck, "video_clk");
- if (r)
- goto err;
- }
+ dss.dss_clk = clk;
if (cpu_is_omap34xx()) {
- dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck");
- if (IS_ERR(dpll4_m4_ck)) {
+ clk = clk_get(NULL, "dpll4_m4_ck");
+ if (IS_ERR(clk)) {
DSSERR("Failed to get dpll4_m4_ck\n");
- r = PTR_ERR(dpll4_m4_ck);
+ r = PTR_ERR(clk);
goto err;
}
} else if (cpu_is_omap44xx()) {
- dpll4_m4_ck = clk_get(NULL, "dpll_per_m5x2_ck");
- if (IS_ERR(dpll4_m4_ck)) {
+ clk = clk_get(NULL, "dpll_per_m5x2_ck");
+ if (IS_ERR(clk)) {
DSSERR("Failed to get dpll_per_m5x2_ck\n");
- r = PTR_ERR(dpll4_m4_ck);
+ r = PTR_ERR(clk);
goto err;
}
} else { /* omap24xx */
- dpll4_m4_ck = NULL;
+ clk = NULL;
}
- dss.dpll4_m4_ck = dpll4_m4_ck;
-
+ dss.dpll4_m4_ck = clk;
return 0;
err:
- if (dss.dss_ick)
- clk_put(dss.dss_ick);
- if (dss.dss_fck)
- clk_put(dss.dss_fck);
- if (dss.dss_sys_clk)
- clk_put(dss.dss_sys_clk);
- if (dss.dss_tv_fck)
- clk_put(dss.dss_tv_fck);
- if (dss.dss_video_fck)
- clk_put(dss.dss_video_fck);
+ if (dss.dss_clk)
+ clk_put(dss.dss_clk);
if (dss.dpll4_m4_ck)
clk_put(dss.dpll4_m4_ck);
@@ -854,139 +735,28 @@ static void dss_put_clocks(void)
{
if (dss.dpll4_m4_ck)
clk_put(dss.dpll4_m4_ck);
- if (dss.dss_video_fck)
- clk_put(dss.dss_video_fck);
- if (dss.dss_tv_fck)
- clk_put(dss.dss_tv_fck);
- if (dss.dss_sys_clk)
- clk_put(dss.dss_sys_clk);
- clk_put(dss.dss_fck);
- clk_put(dss.dss_ick);
-}
-
-unsigned long dss_clk_get_rate(enum dss_clock clk)
-{
- switch (clk) {
- case DSS_CLK_ICK:
- return clk_get_rate(dss.dss_ick);
- case DSS_CLK_FCK:
- return clk_get_rate(dss.dss_fck);
- case DSS_CLK_SYSCK:
- return clk_get_rate(dss.dss_sys_clk);
- case DSS_CLK_TVFCK:
- return clk_get_rate(dss.dss_tv_fck);
- case DSS_CLK_VIDFCK:
- return clk_get_rate(dss.dss_video_fck);
- }
-
- BUG();
- return 0;
+ clk_put(dss.dss_clk);
}
-static unsigned count_clk_bits(enum dss_clock clks)
+int dss_runtime_get(void)
{
- unsigned num_clks = 0;
-
- if (clks & DSS_CLK_ICK)
- ++num_clks;
- if (clks & DSS_CLK_FCK)
- ++num_clks;
- if (clks & DSS_CLK_SYSCK)
- ++num_clks;
- if (clks & DSS_CLK_TVFCK)
- ++num_clks;
- if (clks & DSS_CLK_VIDFCK)
- ++num_clks;
-
- return num_clks;
-}
-
-static void dss_clk_enable_no_ctx(enum dss_clock clks)
-{
- unsigned num_clks = count_clk_bits(clks);
-
- if (clks & DSS_CLK_ICK)
- clk_enable(dss.dss_ick);
- if (clks & DSS_CLK_FCK)
- clk_enable(dss.dss_fck);
- if ((clks & DSS_CLK_SYSCK) && dss.dss_sys_clk)
- clk_enable(dss.dss_sys_clk);
- if ((clks & DSS_CLK_TVFCK) && dss.dss_tv_fck)
- clk_enable(dss.dss_tv_fck);
- if ((clks & DSS_CLK_VIDFCK) && dss.dss_video_fck)
- clk_enable(dss.dss_video_fck);
-
- dss.num_clks_enabled += num_clks;
-}
-
-void dss_clk_enable(enum dss_clock clks)
-{
- bool check_ctx = dss.num_clks_enabled = 0;
-
- dss_clk_enable_no_ctx(clks);
-
- /*
- * HACK: On omap4 the registers may not be accessible right after
- * enabling the clocks. At some point this will be handled by
- * pm_runtime, but for the time begin this should make things work.
- */
- if (cpu_is_omap44xx() && check_ctx)
- udelay(10);
-
- if (check_ctx && cpu_is_omap34xx() && dss_need_ctx_restore())
- restore_all_ctx();
-}
-
-static void dss_clk_disable_no_ctx(enum dss_clock clks)
-{
- unsigned num_clks = count_clk_bits(clks);
-
- if (clks & DSS_CLK_ICK)
- clk_disable(dss.dss_ick);
- if (clks & DSS_CLK_FCK)
- clk_disable(dss.dss_fck);
- if ((clks & DSS_CLK_SYSCK) && dss.dss_sys_clk)
- clk_disable(dss.dss_sys_clk);
- if ((clks & DSS_CLK_TVFCK) && dss.dss_tv_fck)
- clk_disable(dss.dss_tv_fck);
- if ((clks & DSS_CLK_VIDFCK) && dss.dss_video_fck)
- clk_disable(dss.dss_video_fck);
-
- dss.num_clks_enabled -= num_clks;
-}
-
-void dss_clk_disable(enum dss_clock clks)
-{
- if (cpu_is_omap34xx()) {
- unsigned num_clks = count_clk_bits(clks);
-
- BUG_ON(dss.num_clks_enabled < num_clks);
+ int r;
- if (dss.num_clks_enabled = num_clks)
- save_all_ctx();
- }
+ DSSDBG("dss_runtime_get\n");
- dss_clk_disable_no_ctx(clks);
+ r = pm_runtime_get_sync(&dss.pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
}
-static void dss_clk_enable_all_no_ctx(void)
+void dss_runtime_put(void)
{
- enum dss_clock clks;
-
- clks = DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_SYSCK | DSS_CLK_TVFCK;
- if (cpu_is_omap34xx())
- clks |= DSS_CLK_VIDFCK;
- dss_clk_enable_no_ctx(clks);
-}
+ int r;
-static void dss_clk_disable_all_no_ctx(void)
-{
- enum dss_clock clks;
+ DSSDBG("dss_runtime_put\n");
- clks = DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_SYSCK | DSS_CLK_TVFCK;
- if (cpu_is_omap34xx())
- clks |= DSS_CLK_VIDFCK;
- dss_clk_disable_no_ctx(clks);
+ r = pm_runtime_put(&dss.pdev->dev);
+ WARN_ON(r < 0);
}
/* DEBUGFS */
@@ -1001,7 +771,6 @@ void dss_debug_dump_clocks(struct seq_file *s)
}
#endif
-
/* DSS HW IP initialisation */
static int omap_dsshw_probe(struct platform_device *pdev)
{
@@ -1028,19 +797,13 @@ static int omap_dsshw_probe(struct platform_device *pdev)
if (r)
goto err_clocks;
- dss_clk_enable_all_no_ctx();
-
dss_init_ctx_loss_count();
- /* disable LCD and DIGIT output. This seems to fix the synclost
- * problem that we get, if the bootloader starts the DSS and
- * the kernel resets it */
- omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
+ pm_runtime_enable(&pdev->dev);
- _omap_dss_reset();
-
- /* autoidle */
- REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
+ r = dss_runtime_get();
+ if (r)
+ goto err_runtime_get;
/* Select DPLL */
REG_FLD_MOD(DSS_CONTROL, 0, 0, 0);
@@ -1068,19 +831,19 @@ static int omap_dsshw_probe(struct platform_device *pdev)
goto err_sdi;
}
- dss_save_context();
-
rev = dss_read_reg(DSS_REVISION);
printk(KERN_INFO "OMAP DSS rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
- dss_clk_disable_all_no_ctx();
+ dss_runtime_put();
return 0;
err_sdi:
dpi_exit();
err_dpi:
- dss_clk_disable_all_no_ctx();
+ dss_runtime_put();
+err_runtime_get:
+ pm_runtime_disable(&pdev->dev);
dss_put_clocks();
err_clocks:
iounmap(dss.base);
@@ -1095,25 +858,40 @@ static int omap_dsshw_remove(struct platform_device *pdev)
iounmap(dss.base);
- /*
- * As part of hwmod changes, DSS is not the only controller of dss
- * clocks; hwmod framework itself will also enable clocks during hwmod
- * init for dss, and autoidle is set in h/w for DSS. Hence, there's no
- * need to disable clocks if their usecounts > 1.
- */
- WARN_ON(dss.num_clks_enabled > 0);
+ pm_runtime_disable(&pdev->dev);
dss_put_clocks();
return 0;
}
+static int dss_runtime_suspend(struct device *dev)
+{
+ dss_save_context();
+ clk_disable(dss.dss_clk);
+ return 0;
+}
+
+static int dss_runtime_resume(struct device *dev)
+{
+ clk_enable(dss.dss_clk);
+ if (dss_need_ctx_restore())
+ dss_restore_context();
+ return 0;
+}
+
+static const struct dev_pm_ops dss_pm_ops = {
+ .runtime_suspend = dss_runtime_suspend,
+ .runtime_resume = dss_runtime_resume,
+};
+
static struct platform_driver omap_dsshw_driver = {
.probe = omap_dsshw_probe,
.remove = omap_dsshw_remove,
.driver = {
.name = "omapdss_dss",
.owner = THIS_MODULE,
+ .pm = &dss_pm_ops,
},
};
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index aeb611d..ce17a61 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -109,14 +109,6 @@ enum omap_parallel_interface_mode {
OMAP_DSS_PARALLELMODE_DSI,
};
-enum dss_clock {
- DSS_CLK_ICK = 1 << 0, /* DSS_L3_ICLK and DSS_L4_ICLK */
- DSS_CLK_FCK = 1 << 1, /* DSS1_ALWON_FCLK */
- DSS_CLK_SYSCK = 1 << 2, /* DSS2_ALWON_FCLK */
- DSS_CLK_TVFCK = 1 << 3, /* DSS_TV_FCLK */
- DSS_CLK_VIDFCK = 1 << 4, /* DSS_96M_FCLK*/
-};
-
enum dss_hdmi_venc_clk_source_select {
DSS_VENC_TV_CLK = 0,
DSS_HDMI_M_PCLK = 1,
@@ -220,12 +212,10 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force);
int dss_init_platform_driver(void);
void dss_uninit_platform_driver(void);
+int dss_runtime_get(void);
+void dss_runtime_put(void);
+
void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
-void dss_save_context(void);
-void dss_restore_context(void);
-void dss_clk_enable(enum dss_clock clks);
-void dss_clk_disable(enum dss_clock clks);
-unsigned long dss_clk_get_rate(enum dss_clock clk);
const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
void dss_dump_clocks(struct seq_file *s);
@@ -282,15 +272,15 @@ struct file_operations;
int dsi_init_platform_driver(void);
void dsi_uninit_platform_driver(void);
+int dsi_runtime_get(struct platform_device *dsidev);
+void dsi_runtime_put(struct platform_device *dsidev);
+
void dsi_dump_clocks(struct seq_file *s);
void dsi_create_debugfs_files_irq(struct dentry *debugfs_dir,
const struct file_operations *debug_fops);
void dsi_create_debugfs_files_reg(struct dentry *debugfs_dir,
const struct file_operations *debug_fops);
-void dsi_save_context(void);
-void dsi_restore_context(void);
-
int dsi_init_display(struct omap_dss_device *display);
void dsi_irq_handler(void);
unsigned long dsi_get_pll_hsdiv_dispc_rate(struct platform_device *dsidev);
@@ -316,6 +306,13 @@ static inline int dsi_init_platform_driver(void)
static inline void dsi_uninit_platform_driver(void)
{
}
+static inline int dsi_runtime_get(struct platform_device *dsidev)
+{
+ return 0;
+}
+static inline void dsi_runtime_put(struct platform_device *dsidev)
+{
+}
static inline unsigned long dsi_get_pll_hsdiv_dispc_rate(struct platform_device *dsidev)
{
WARN("%s: DSI not compiled in, returning rate as 0\n", __func__);
@@ -383,8 +380,8 @@ void dispc_dump_regs(struct seq_file *s);
void dispc_irq_handler(void);
void dispc_fake_vsync_irq(void);
-void dispc_save_context(void);
-void dispc_restore_context(void);
+int dispc_runtime_get(void);
+void dispc_runtime_put(void);
void dispc_enable_sidle(void);
void dispc_disable_sidle(void);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index b630c98..1bbf313 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -30,6 +30,8 @@
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
#include <video/omapdss.h>
#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
@@ -52,6 +54,9 @@ static struct {
u8 edid_set;
bool custom_set;
struct hdmi_config cfg;
+
+ struct clk *sys_clk;
+ struct clk *hdmi_clk;
} hdmi;
/*
@@ -163,6 +168,27 @@ static inline int hdmi_wait_for_bit_change(const struct hdmi_reg idx,
return val;
}
+static int hdmi_runtime_get(void)
+{
+ int r;
+
+ DSSDBG("hdmi_runtime_get\n");
+
+ r = pm_runtime_get_sync(&hdmi.pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
+}
+
+static void hdmi_runtime_put(void)
+{
+ int r;
+
+ DSSDBG("hdmi_runtime_put\n");
+
+ r = pm_runtime_put(&hdmi.pdev->dev);
+ WARN_ON(r < 0);
+}
+
int hdmi_init_display(struct omap_dss_device *dssdev)
{
DSSDBG("init_display\n");
@@ -312,30 +338,11 @@ static int hdmi_phy_init(void)
return 0;
}
-static int hdmi_wait_softreset(void)
-{
- /* reset W1 */
- REG_FLD_MOD(HDMI_WP_SYSCONFIG, 0x1, 0, 0);
-
- /* wait till SOFTRESET = 0 */
- if (hdmi_wait_for_bit_change(HDMI_WP_SYSCONFIG, 0, 0, 0) != 0) {
- DSSERR("sysconfig reset failed\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
static int hdmi_pll_program(struct hdmi_pll_info *fmt)
{
u16 r = 0;
enum hdmi_clk_refsel refsel;
- /* wait for wrapper reset */
- r = hdmi_wait_softreset();
- if (r)
- return r;
-
r = hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF);
if (r)
return r;
@@ -1065,7 +1072,7 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
unsigned long clkin, refclk;
u32 mf;
- clkin = dss_clk_get_rate(DSS_CLK_SYSCK) / 10000;
+ clkin = clk_get_rate(hdmi.sys_clk) / 10000;
/*
* Input clock is predivided by N + 1
* out put of which is reference clk
@@ -1099,16 +1106,6 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd);
}
-static void hdmi_enable_clocks(int enable)
-{
- if (enable)
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK |
- DSS_CLK_SYSCK | DSS_CLK_VIDFCK);
- else
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK |
- DSS_CLK_SYSCK | DSS_CLK_VIDFCK);
-}
-
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r, code = 0;
@@ -1116,7 +1113,9 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
struct omap_video_timings *p;
unsigned long phy;
- hdmi_enable_clocks(1);
+ r = hdmi_runtime_get();
+ if (r)
+ return r;
dispc_enable_channel(OMAP_DSS_CHANNEL_DIGIT, 0);
@@ -1181,7 +1180,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
return 0;
err:
- hdmi_enable_clocks(0);
+ hdmi_runtime_put();
return -EIO;
}
@@ -1192,7 +1191,7 @@ static void hdmi_power_off(struct omap_dss_device *dssdev)
hdmi_wp_video_start(0);
hdmi_phy_off();
hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF);
- hdmi_enable_clocks(0);
+ hdmi_runtime_put();
hdmi.edid_set = 0;
}
@@ -1687,14 +1686,43 @@ static struct snd_soc_dai_driver hdmi_codec_dai_drv = {
};
#endif
+static int hdmi_get_clocks(struct platform_device *pdev)
+{
+ struct clk *clk;
+
+ clk = clk_get(&pdev->dev, "sys_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get sys_clk\n");
+ return PTR_ERR(clk);
+ }
+
+ hdmi.sys_clk = clk;
+
+ clk = clk_get(&pdev->dev, "hdmi_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get hdmi_clk\n");
+ clk_put(hdmi.sys_clk);
+ return PTR_ERR(clk);
+ }
+
+ hdmi.hdmi_clk = clk;
+
+ return 0;
+}
+
+static void hdmi_put_clocks(void)
+{
+ if (hdmi.sys_clk)
+ clk_put(hdmi.sys_clk);
+ if (hdmi.hdmi_clk)
+ clk_put(hdmi.hdmi_clk);
+}
+
/* HDMI HW IP initialisation */
static int omapdss_hdmihw_probe(struct platform_device *pdev)
{
struct resource *hdmi_mem;
-#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
- defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
- int ret;
-#endif
+ int r;
hdmi.pdata = pdev->dev.platform_data;
hdmi.pdev = pdev;
@@ -1714,17 +1742,25 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ r = hdmi_get_clocks(pdev);
+ if (r) {
+ iounmap(hdmi.base_wp);
+ return r;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
hdmi_panel_init();
#if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
/* Register ASoC codec DAI */
- ret = snd_soc_register_codec(&pdev->dev, &hdmi_audio_codec_drv,
+ r = snd_soc_register_codec(&pdev->dev, &hdmi_audio_codec_drv,
&hdmi_codec_dai_drv, 1);
- if (ret) {
+ if (r) {
DSSERR("can't register ASoC HDMI audio codec\n");
- return ret;
+ return r;
}
#endif
return 0;
@@ -1739,17 +1775,62 @@ static int omapdss_hdmihw_remove(struct platform_device *pdev)
snd_soc_unregister_codec(&pdev->dev);
#endif
+ pm_runtime_disable(&pdev->dev);
+
+ hdmi_put_clocks();
+
iounmap(hdmi.base_wp);
return 0;
}
+static int hdmi_runtime_suspend(struct device *dev)
+{
+ clk_disable(hdmi.hdmi_clk);
+ clk_disable(hdmi.sys_clk);
+
+ dispc_runtime_put();
+ dss_runtime_put();
+
+ return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+ int r;
+
+ r = dss_runtime_get();
+ if (r < 0)
+ goto err_get_dss;
+
+ r = dispc_runtime_get();
+ if (r < 0)
+ goto err_get_dispc;
+
+
+ clk_enable(hdmi.sys_clk);
+ clk_enable(hdmi.hdmi_clk);
+
+ return 0;
+
+err_get_dispc:
+ dss_runtime_put();
+err_get_dss:
+ return r;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+ .runtime_suspend = hdmi_runtime_suspend,
+ .runtime_resume = hdmi_runtime_resume,
+};
+
static struct platform_driver omapdss_hdmihw_driver = {
.probe = omapdss_hdmihw_probe,
.remove = omapdss_hdmihw_remove,
.driver = {
.name = "omapdss_hdmi",
.owner = THIS_MODULE,
+ .pm = &hdmi_pm_ops,
},
};
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 9aeea50..a148a80 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -1236,6 +1236,10 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name);
+ r = dispc_runtime_get();
+ if (r)
+ return r;
+
spin_lock_irqsave(&dss_cache.lock, flags);
/* Configure overlays */
@@ -1409,7 +1413,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
}
r = 0;
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
if (!dss_cache.irq_enabled) {
u32 mask;
@@ -1422,10 +1425,11 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
dss_cache.irq_enabled = true;
}
configure_dispc();
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
spin_unlock_irqrestore(&dss_cache.lock, flags);
+ dispc_runtime_put();
+
return r;
}
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index cfbfc57..c84380c 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -84,32 +84,42 @@ static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
old_mgr = ovl->manager;
+ r = dispc_runtime_get();
+ if (r)
+ return r;
+
/* detach old manager */
if (old_mgr) {
r = ovl->unset_manager(ovl);
if (r) {
DSSERR("detach failed\n");
- return r;
+ goto err;
}
r = old_mgr->apply(old_mgr);
if (r)
- return r;
+ goto err;
}
if (mgr) {
r = ovl->set_manager(ovl, mgr);
if (r) {
DSSERR("Failed to attach overlay\n");
- return r;
+ goto err;
}
r = mgr->apply(mgr);
if (r)
- return r;
+ goto err;
}
+ dispc_runtime_put();
+
return size;
+
+err:
+ dispc_runtime_put();
+ return r;
}
static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
@@ -507,7 +517,6 @@ static int omap_dss_set_manager(struct omap_overlay *ovl,
ovl->manager = mgr;
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
/* XXX: When there is an overlay on a DSI manual update display, and
* the overlay is first disabled, then moved to tv, and enabled, we
* seem to get SYNC_LOST_DIGIT error.
@@ -521,7 +530,6 @@ static int omap_dss_set_manager(struct omap_overlay *ovl,
* the overlay, but before moving the overlay to TV.
*/
dispc_set_channel_out(ovl->id, mgr->id);
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
return 0;
}
@@ -722,6 +730,8 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
}
if (mgr) {
+ dispc_runtime_get();
+
for (i = 0; i < dss_feat_get_num_ovls(); i++) {
struct omap_overlay *ovl;
ovl = omap_dss_get_overlay(i);
@@ -731,6 +741,8 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
omap_dss_set_manager(ovl, mgr);
}
}
+
+ dispc_runtime_put();
}
}
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index a873104..c57e3fb 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -34,6 +34,7 @@
#include <linux/seq_file.h>
#include <linux/semaphore.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <video/omapdss.h>
#include "dss.h"
@@ -121,12 +122,25 @@ static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
return __raw_readl(rfbi.base + idx.idx);
}
-static void rfbi_enable_clocks(bool enable)
+static int rfbi_runtime_get(void)
{
- if (enable)
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
- else
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ int r;
+
+ DSSDBG("rfbi_runtime_get\n");
+
+ r = pm_runtime_get_sync(&rfbi.pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
+}
+
+static void rfbi_runtime_put(void)
+{
+ int r;
+
+ DSSDBG("rfbi_runtime_put\n");
+
+ r = pm_runtime_put(&rfbi.pdev->dev);
+ WARN_ON(r < 0);
}
void rfbi_bus_lock(void)
@@ -806,7 +820,8 @@ void rfbi_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ if (rfbi_runtime_get())
+ return;
DUMPREG(RFBI_REVISION);
DUMPREG(RFBI_SYSCONFIG);
@@ -837,7 +852,7 @@ void rfbi_dump_regs(struct seq_file *s)
DUMPREG(RFBI_VSYNC_WIDTH);
DUMPREG(RFBI_HSYNC_WIDTH);
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ rfbi_runtime_put();
#undef DUMPREG
}
@@ -845,7 +860,9 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
- rfbi_enable_clocks(1);
+ r = rfbi_runtime_get();
+ if (r)
+ return r;
r = omap_dss_start_device(dssdev);
if (r) {
@@ -880,6 +897,7 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
err1:
omap_dss_stop_device(dssdev);
err0:
+ rfbi_runtime_put();
return r;
}
EXPORT_SYMBOL(omapdss_rfbi_display_enable);
@@ -890,7 +908,7 @@ void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
DISPC_IRQ_FRAMEDONE);
omap_dss_stop_device(dssdev);
- rfbi_enable_clocks(0);
+ rfbi_runtime_put();
}
EXPORT_SYMBOL(omapdss_rfbi_display_disable);
@@ -905,8 +923,9 @@ int rfbi_init_display(struct omap_dss_device *dssdev)
static int omap_rfbihw_probe(struct platform_device *pdev)
{
u32 rev;
- u32 l;
struct resource *rfbi_mem;
+ struct clk *clk;
+ int r;
rfbi.pdev = pdev;
@@ -915,46 +934,99 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0);
if (!rfbi_mem) {
DSSERR("can't get IORESOURCE_MEM RFBI\n");
- return -EINVAL;
+ r = -EINVAL;
+ goto err_ioremap;
}
rfbi.base = ioremap(rfbi_mem->start, resource_size(rfbi_mem));
if (!rfbi.base) {
DSSERR("can't ioremap RFBI\n");
- return -ENOMEM;
+ r = -ENOMEM;
+ goto err_ioremap;
}
- rfbi_enable_clocks(1);
+ pm_runtime_enable(&pdev->dev);
+
+ r = rfbi_runtime_get();
+ if (r)
+ goto err_get_rfbi;
msleep(10);
- rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+ clk = clk_get(&pdev->dev, "rfbi_iclk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get rfbi_iclk\n");
+ r = PTR_ERR(clk);
+ goto err_get_ick;
+ }
+
+ rfbi.l4_khz = clk_get_rate(clk) / 1000;
- /* Enable autoidle and smart-idle */
- l = rfbi_read_reg(RFBI_SYSCONFIG);
- l |= (1 << 0) | (2 << 3);
- rfbi_write_reg(RFBI_SYSCONFIG, l);
+ clk_put(clk);
rev = rfbi_read_reg(RFBI_REVISION);
dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
- rfbi_enable_clocks(0);
+ rfbi_runtime_put();
return 0;
+
+err_get_ick:
+ rfbi_runtime_put();
+err_get_rfbi:
+ pm_runtime_disable(&pdev->dev);
+ iounmap(rfbi.base);
+err_ioremap:
+ return r;
}
static int omap_rfbihw_remove(struct platform_device *pdev)
{
+ pm_runtime_disable(&pdev->dev);
iounmap(rfbi.base);
return 0;
}
+static int rfbi_runtime_suspend(struct device *dev)
+{
+ dispc_runtime_put();
+ dss_runtime_put();
+
+ return 0;
+}
+
+static int rfbi_runtime_resume(struct device *dev)
+{
+ int r;
+
+ r = dss_runtime_get();
+ if (r < 0)
+ goto err_get_dss;
+
+ r = dispc_runtime_get();
+ if (r < 0)
+ goto err_get_dispc;
+
+ return 0;
+
+err_get_dispc:
+ dss_runtime_put();
+err_get_dss:
+ return r;
+}
+
+static const struct dev_pm_ops rfbi_pm_ops = {
+ .runtime_suspend = rfbi_runtime_suspend,
+ .runtime_resume = rfbi_runtime_resume,
+};
+
static struct platform_driver omap_rfbihw_driver = {
.probe = omap_rfbihw_probe,
.remove = omap_rfbihw_remove,
.driver = {
.name = "omapdss_rfbi",
.owner = THIS_MODULE,
+ .pm = &rfbi_pm_ops,
},
};
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0bd4b03..3a688c8 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -20,13 +20,11 @@
#define DSS_SUBSYS_NAME "SDI"
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
static struct {
@@ -60,14 +58,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
r = omap_dss_start_device(dssdev);
if (r) {
DSSERR("failed to start device\n");
- goto err0;
+ goto err_start_dev;
}
r = regulator_enable(sdi.vdds_sdi_reg);
if (r)
- goto err1;
+ goto err_reg_enable;
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
+ r = dss_runtime_get();
+ if (r)
+ goto err_get_dss;
+
+ r = dispc_runtime_get();
+ if (r)
+ goto err_get_dispc;
sdi_basic_init(dssdev);
@@ -80,7 +84,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
r = dss_calc_clock_div(1, t->pixel_clock * 1000,
&dss_cinfo, &dispc_cinfo);
if (r)
- goto err2;
+ goto err_calc_clock_div;
fck = dss_cinfo.fck;
lck_div = dispc_cinfo.lck_div;
@@ -101,27 +105,34 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
r = dss_set_clock_div(&dss_cinfo);
if (r)
- goto err2;
+ goto err_set_dss_clock_div;
r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r)
- goto err2;
+ goto err_set_dispc_clock_div;
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
if (r)
- goto err1;
+ goto err_sdi_enable;
mdelay(2);
dssdev->manager->enable(dssdev->manager);
return 0;
-err2:
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+
+err_sdi_enable:
+err_set_dispc_clock_div:
+err_set_dss_clock_div:
+err_calc_clock_div:
+ dispc_runtime_put();
+err_get_dispc:
+ dss_runtime_put();
+err_get_dss:
regulator_disable(sdi.vdds_sdi_reg);
-err1:
+err_reg_enable:
omap_dss_stop_device(dssdev);
-err0:
+err_start_dev:
return r;
}
EXPORT_SYMBOL(omapdss_sdi_display_enable);
@@ -132,7 +143,8 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
dss_sdi_disable();
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
+ dispc_runtime_put();
+ dss_runtime_put();
regulator_disable(sdi.vdds_sdi_reg);
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 15b4431..67abff2 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -33,6 +33,7 @@
#include <linux/seq_file.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
#include <video/omapdss.h>
#include <plat/cpu.h>
@@ -293,6 +294,9 @@ static struct {
struct mutex venc_lock;
u32 wss_data;
struct regulator *vdda_dac_reg;
+
+ struct clk *tv_clk;
+ struct clk *tv_dac_clk;
} venc;
static inline void venc_write_reg(int idx, u32 val)
@@ -381,17 +385,25 @@ static void venc_reset(void)
#endif
}
-static void venc_enable_clocks(int enable)
+static int venc_runtime_get(void)
{
- if (enable) {
- dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK);
- if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK))
- dss_clk_enable(DSS_CLK_VIDFCK);
- } else {
- dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK);
- if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK))
- dss_clk_disable(DSS_CLK_VIDFCK);
- }
+ int r;
+
+ DSSDBG("venc_runtime_get\n");
+
+ r = pm_runtime_get_sync(&venc.pdev->dev);
+ WARN_ON(r < 0);
+ return r < 0 ? r : 0;
+}
+
+static void venc_runtime_put(void)
+{
+ int r;
+
+ DSSDBG("venc_runtime_put\n");
+
+ r = pm_runtime_put(&venc.pdev->dev);
+ WARN_ON(r < 0);
}
static const struct venc_config *venc_timings_to_config(
@@ -410,8 +422,6 @@ static void venc_power_on(struct omap_dss_device *dssdev)
{
u32 l;
- venc_enable_clocks(1);
-
venc_reset();
venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
@@ -452,8 +462,6 @@ static void venc_power_off(struct omap_dss_device *dssdev)
dssdev->platform_disable(dssdev);
regulator_disable(venc.vdda_dac_reg);
-
- venc_enable_clocks(0);
}
@@ -491,6 +499,10 @@ static int venc_panel_enable(struct omap_dss_device *dssdev)
goto err1;
}
+ r = venc_runtime_get();
+ if (r)
+ goto err1;
+
venc_power_on(dssdev);
venc.wss_data = 0;
@@ -524,6 +536,8 @@ static void venc_panel_disable(struct omap_dss_device *dssdev)
venc_power_off(dssdev);
+ venc_runtime_put();
+
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
omap_dss_stop_device(dssdev);
@@ -602,6 +616,7 @@ static u32 venc_get_wss(struct omap_dss_device *dssdev)
static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
{
const struct venc_config *config;
+ int r;
DSSDBG("venc_set_wss\n");
@@ -612,16 +627,19 @@ static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
/* Invert due to VENC_L21_WC_CTL:INV=1 */
venc.wss_data = (wss ^ 0xfffff) << 8;
- venc_enable_clocks(1);
+ r = venc_runtime_get();
+ if (r)
+ goto err;
venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data |
venc.wss_data);
- venc_enable_clocks(0);
+ venc_runtime_put();
+err:
mutex_unlock(&venc.venc_lock);
- return 0;
+ return r;
}
static struct omap_dss_driver venc_driver = {
@@ -677,7 +695,8 @@ void venc_dump_regs(struct seq_file *s)
{
#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
- venc_enable_clocks(1);
+ if (venc_runtime_get())
+ return;
DUMPREG(VENC_F_CONTROL);
DUMPREG(VENC_VIDOUT_CTRL);
@@ -721,16 +740,53 @@ void venc_dump_regs(struct seq_file *s)
DUMPREG(VENC_OUTPUT_CONTROL);
DUMPREG(VENC_OUTPUT_TEST);
- venc_enable_clocks(0);
+ venc_runtime_put();
#undef DUMPREG
}
+static int venc_get_clocks(struct platform_device *pdev)
+{
+ struct clk *clk;
+
+ clk = clk_get(&pdev->dev, "tv_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get tv_clk\n");
+ return PTR_ERR(clk);
+ }
+
+ venc.tv_clk = clk;
+
+ if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK)) {
+ clk = clk_get(&pdev->dev, "tv_dac_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get tv_dac_clk\n");
+ clk_put(venc.tv_clk);
+ return PTR_ERR(clk);
+ }
+ } else {
+ clk = NULL;
+ }
+
+ venc.tv_dac_clk = clk;
+
+ return 0;
+}
+
+static void venc_put_clocks(void)
+{
+ if (venc.tv_clk)
+ clk_put(venc.tv_clk);
+ if (venc.tv_dac_clk)
+ clk_put(venc.tv_dac_clk);
+}
+
/* VENC HW IP initialisation */
static int omap_venchw_probe(struct platform_device *pdev)
{
u8 rev_id;
struct resource *venc_mem;
+ int r;
venc.pdev = pdev;
@@ -741,22 +797,40 @@ static int omap_venchw_probe(struct platform_device *pdev)
venc_mem = platform_get_resource(venc.pdev, IORESOURCE_MEM, 0);
if (!venc_mem) {
DSSERR("can't get IORESOURCE_MEM VENC\n");
- return -EINVAL;
+ r = -EINVAL;
+ goto err_ioremap;
}
venc.base = ioremap(venc_mem->start, resource_size(venc_mem));
if (!venc.base) {
DSSERR("can't ioremap VENC\n");
- return -ENOMEM;
+ r = -ENOMEM;
+ goto err_ioremap;
}
- venc_enable_clocks(1);
+ r = venc_get_clocks(pdev);
+ if (r)
+ goto err_get_clk;
+
+ pm_runtime_enable(&pdev->dev);
+
+ r = venc_runtime_get();
+ if (r)
+ goto err_get_venc;
rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
dev_dbg(&pdev->dev, "OMAP VENC rev %d\n", rev_id);
- venc_enable_clocks(0);
+ venc_runtime_put();
return omap_dss_register_driver(&venc_driver);
+
+err_get_venc:
+ pm_runtime_disable(&pdev->dev);
+ venc_put_clocks();
+err_get_clk:
+ iounmap(venc.base);
+err_ioremap:
+ return r;
}
static int omap_venchw_remove(struct platform_device *pdev)
@@ -767,16 +841,61 @@ static int omap_venchw_remove(struct platform_device *pdev)
}
omap_dss_unregister_driver(&venc_driver);
+ pm_runtime_disable(&pdev->dev);
+ venc_put_clocks();
+
iounmap(venc.base);
return 0;
}
+static int venc_runtime_suspend(struct device *dev)
+{
+ if (venc.tv_dac_clk)
+ clk_disable(venc.tv_dac_clk);
+ clk_disable(venc.tv_clk);
+
+ dispc_runtime_put();
+ dss_runtime_put();
+
+ return 0;
+}
+
+static int venc_runtime_resume(struct device *dev)
+{
+ int r;
+
+ r = dss_runtime_get();
+ if (r < 0)
+ goto err_get_dss;
+
+ r = dispc_runtime_get();
+ if (r < 0)
+ goto err_get_dispc;
+
+ clk_enable(venc.tv_clk);
+ if (venc.tv_dac_clk)
+ clk_enable(venc.tv_dac_clk);
+
+ return 0;
+
+err_get_dispc:
+ dss_runtime_put();
+err_get_dss:
+ return r;
+}
+
+static const struct dev_pm_ops venc_pm_ops = {
+ .runtime_suspend = venc_runtime_suspend,
+ .runtime_resume = venc_runtime_resume,
+};
+
static struct platform_driver omap_venchw_driver = {
.probe = omap_venchw_probe,
.remove = omap_venchw_remove,
.driver = {
.name = "omapdss_venc",
.owner = THIS_MODULE,
+ .pm = &venc_pm_ops,
},
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support
2011-06-09 13:56 ` [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support Tomi Valkeinen
@ 2011-06-09 20:03 ` Paul Mundt
2011-06-10 6:52 ` Tomi Valkeinen
2011-06-21 14:49 ` Kevin Hilman
1 sibling, 1 reply; 54+ messages in thread
From: Paul Mundt @ 2011-06-09 20:03 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, paul, khilman
On Thu, Jun 09, 2011 at 04:56:42PM +0300, Tomi Valkeinen wrote:
> +int dispc_runtime_get(void)
> +{
> + int r;
> +
> + DSSDBG("dispc_runtime_get\n");
> +
> + r = pm_runtime_get_sync(&dispc.pdev->dev);
> + WARN_ON(r < 0);
> + return r < 0 ? r : 0;
> +}
> +
> +void dispc_runtime_put(void)
> +{
> + int r;
> +
> + DSSDBG("dispc_runtime_put\n");
> +
> + r = pm_runtime_put(&dispc.pdev->dev);
> + WARN_ON(r < 0);
> }
>
This seems a bit odd. Your runtime_get wrapper is explicitly synchronous
while your put wrapper is explicitly asynchronous, although these details
(if intentional) are not at all obvious from the wrapper naming. From
the use in the error paths and so on you will definitely need to be using
pm_runtime_put_sync() at least some of the time.
In the interest of avoiding confusion, I would in general just get rid of
these wrappers and use the pm_runtime calls openly, as you already do for
some of the other parts of the API. The runtime PM framework has pretty
verbose debugging already that goes well beyond what you presently have,
too.
You seem to have adopted this sync/async pattern for all of the users:
> +int dsi_runtime_get(struct platform_device *dsidev)
> {
> - if (enable)
> - dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
> - else
> - dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
> + int r;
> + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
> +
> + DSSDBG("dsi_runtime_get\n");
> +
> + r = pm_runtime_get_sync(&dsi->pdev->dev);
> + WARN_ON(r < 0);
> + return r < 0 ? r : 0;
> +}
> +
> +void dsi_runtime_put(struct platform_device *dsidev)
> +{
> + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
> + int r;
> +
> + DSSDBG("dsi_runtime_put\n");
> +
> + r = pm_runtime_put(&dsi->pdev->dev);
> + WARN_ON(r < 0);
> }
>
Here.
> -void dss_clk_disable(enum dss_clock clks)
> -{
..
> - dss_clk_disable_no_ctx(clks);
> + r = pm_runtime_get_sync(&dss.pdev->dev);
> + WARN_ON(r < 0);
> + return r < 0 ? r : 0;
> }
>
> -static void dss_clk_enable_all_no_ctx(void)
> +void dss_runtime_put(void)
> {
..
> + r = pm_runtime_put(&dss.pdev->dev);
> + WARN_ON(r < 0);
> }
>
And here.
> +static int hdmi_runtime_get(void)
> +{
> + int r;
> +
> + DSSDBG("hdmi_runtime_get\n");
> +
> + r = pm_runtime_get_sync(&hdmi.pdev->dev);
> + WARN_ON(r < 0);
> + return r < 0 ? r : 0;
> +}
> +
> +static void hdmi_runtime_put(void)
> +{
> + int r;
> +
> + DSSDBG("hdmi_runtime_put\n");
> +
> + r = pm_runtime_put(&hdmi.pdev->dev);
> + WARN_ON(r < 0);
> +}
> +
And here.
> -static void rfbi_enable_clocks(bool enable)
> +static int rfbi_runtime_get(void)
> {
> - if (enable)
> - dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
> - else
> - dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
> + int r;
> +
> + DSSDBG("rfbi_runtime_get\n");
> +
> + r = pm_runtime_get_sync(&rfbi.pdev->dev);
> + WARN_ON(r < 0);
> + return r < 0 ? r : 0;
> +}
> +
> +static void rfbi_runtime_put(void)
> +{
> + int r;
> +
> + DSSDBG("rfbi_runtime_put\n");
> +
> + r = pm_runtime_put(&rfbi.pdev->dev);
> + WARN_ON(r < 0);
> }
>
And here.
> +static int venc_runtime_get(void)
> {
> - if (enable) {
> - dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK);
> - if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK))
> - dss_clk_enable(DSS_CLK_VIDFCK);
> - } else {
> - dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK | DSS_CLK_TVFCK);
> - if (dss_has_feature(FEAT_VENC_REQUIRES_TV_DAC_CLK))
> - dss_clk_disable(DSS_CLK_VIDFCK);
> - }
> + int r;
> +
> + DSSDBG("venc_runtime_get\n");
> +
> + r = pm_runtime_get_sync(&venc.pdev->dev);
> + WARN_ON(r < 0);
> + return r < 0 ? r : 0;
> +}
> +
> +static void venc_runtime_put(void)
> +{
> + int r;
> +
> + DSSDBG("venc_runtime_put\n");
> +
> + r = pm_runtime_put(&venc.pdev->dev);
> + WARN_ON(r < 0);
> }
>
And here.
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support
2011-06-09 20:03 ` Paul Mundt
@ 2011-06-10 6:52 ` Tomi Valkeinen
2011-06-10 7:24 ` Paul Mundt
0 siblings, 1 reply; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-10 6:52 UTC (permalink / raw)
To: Paul Mundt; +Cc: linux-omap, linux-fbdev, b-cousson, paul, khilman
On Fri, 2011-06-10 at 05:03 +0900, Paul Mundt wrote:
> On Thu, Jun 09, 2011 at 04:56:42PM +0300, Tomi Valkeinen wrote:
> > +int dispc_runtime_get(void)
> > +{
> > + int r;
> > +
> > + DSSDBG("dispc_runtime_get\n");
> > +
> > + r = pm_runtime_get_sync(&dispc.pdev->dev);
> > + WARN_ON(r < 0);
> > + return r < 0 ? r : 0;
> > +}
> > +
> > +void dispc_runtime_put(void)
> > +{
> > + int r;
> > +
> > + DSSDBG("dispc_runtime_put\n");
> > +
> > + r = pm_runtime_put(&dispc.pdev->dev);
> > + WARN_ON(r < 0);
> > }
> >
> This seems a bit odd. Your runtime_get wrapper is explicitly synchronous
> while your put wrapper is explicitly asynchronous, although these details
> (if intentional) are not at all obvious from the wrapper naming. From
Yes, the naming could be improved to make the (a)synchronousness obvious
to the caller. The functions are internal to DSS, but still.
> the use in the error paths and so on you will definitely need to be using
> pm_runtime_put_sync() at least some of the time.
Hmm, why is that? When the user of, say, dispc, has finished with it and
calls dispc_runtime_put(), the caller shouldn't care if the HW is
actually turned off now or later.
pm_runtime_put() can return an error value, but my wrappers discard it,
as I don't know in which situations it could happen, and what could the
driver do about it. If the HW cannot be turned off now, why could it be
turned off later, and when would that be?
> In the interest of avoiding confusion, I would in general just get rid of
> these wrappers and use the pm_runtime calls openly, as you already do for
> some of the other parts of the API. The runtime PM framework has pretty
> verbose debugging already that goes well beyond what you presently have,
> too.
Yes, my main reason for the wrapper is to hide the device pointer from
the users. So when, say, DSI block needs to use DISPC, it can just call
dispc_runtime_get(), instead of having a mechanism to get the dispc
device (dispc_get_dev() perhaps), and then using pm_runtime directly.
Not a big difference, but I'd like to keep the dispc device pointer
internal to dispc, as there's no real need to access it directly from
elsewhere.
Some of the wrappers are actually private to the file already, like for
dsi. These wrappers could be removed without exposing any device
pointers, but having them keeps the pattern consistent in all parts of
the dss. And it allows me to have the WARN_ONs there easily.
> You seem to have adopted this sync/async pattern for all of the users:
Yes, I think the pattern is similar all around: when you get the device,
you want it to be up and running immediately. When you put the device,
you don't care when it's actually disabled.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread* Re: [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support
2011-06-10 6:52 ` Tomi Valkeinen
@ 2011-06-10 7:24 ` Paul Mundt
0 siblings, 0 replies; 54+ messages in thread
From: Paul Mundt @ 2011-06-10 7:24 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, paul, khilman
On Fri, Jun 10, 2011 at 09:52:09AM +0300, Tomi Valkeinen wrote:
> On Fri, 2011-06-10 at 05:03 +0900, Paul Mundt wrote:
> > the use in the error paths and so on you will definitely need to be using
> > pm_runtime_put_sync() at least some of the time.
>
> Hmm, why is that? When the user of, say, dispc, has finished with it and
> calls dispc_runtime_put(), the caller shouldn't care if the HW is
> actually turned off now or later.
>
Ah, I forgot that pm_runtime_disable() already does the synchronous bits
for you, so you get lucky that way. I was concerned about the race
between the work queue and the device pointer going away, but this is
already handled by the subsystem via __pm_runtime_barrier() in the
disable path.
> pm_runtime_put() can return an error value, but my wrappers discard it,
> as I don't know in which situations it could happen, and what could the
> driver do about it. If the HW cannot be turned off now, why could it be
> turned off later, and when would that be?
>
The return value is primarily aimed at informing you whether it was able
to idle the device, whether there were already pending requests, etc. If
you're in an exit path you're probably not too concerned with this.
If you have some alternate means of cutting power to the block unrelated
to runtime pm based clock control you can use the return value as a
sanity measure to error out before inadvertently cutting power out
underneath another user.
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support
2011-06-09 13:56 ` [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support Tomi Valkeinen
2011-06-09 20:03 ` Paul Mundt
@ 2011-06-21 14:49 ` Kevin Hilman
2011-06-21 15:18 ` Tomi Valkeinen
1 sibling, 1 reply; 54+ messages in thread
From: Kevin Hilman @ 2011-06-21 14:49 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev, b-cousson, paul
Tomi Valkeinen <tomi.valkeinen@ti.com> writes:
> Use PM runtime and HWMOD support to handle enabling and disabling of DSS
> modules.
>
> Each DSS module will have get and put functions which can be used to
> enable and disable that module. The functions use pm_runtime and hwmod
> opt-clocks to enable the hardware.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Runtime PM usage is much better on this version, thanks!
Like Paul, I'm not crazy about the helper functions, especially the ones
that don't do much other than call runtime PM with some debug code
around them since runtime PM already has useful debug.
However, you're the maintainer and the one who has to debug this code
more than I do, so that decision is up to you.
Acked-by: Kevin Hilman <khilman@ti.com>
Kevin
^ permalink raw reply [flat|nested] 54+ messages in thread
* Re: [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support
2011-06-21 14:49 ` Kevin Hilman
@ 2011-06-21 15:18 ` Tomi Valkeinen
0 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-21 15:18 UTC (permalink / raw)
To: Kevin Hilman; +Cc: linux-omap, linux-fbdev, b-cousson, paul
On Tue, 2011-06-21 at 07:49 -0700, Kevin Hilman wrote:
> Tomi Valkeinen <tomi.valkeinen@ti.com> writes:
>
> > Use PM runtime and HWMOD support to handle enabling and disabling of DSS
> > modules.
> >
> > Each DSS module will have get and put functions which can be used to
> > enable and disable that module. The functions use pm_runtime and hwmod
> > opt-clocks to enable the hardware.
> >
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>
> Runtime PM usage is much better on this version, thanks!
>
> Like Paul, I'm not crazy about the helper functions, especially the ones
> that don't do much other than call runtime PM with some debug code
> around them since runtime PM already has useful debug.
>
> However, you're the maintainer and the one who has to debug this code
> more than I do, so that decision is up to you.
I have to say I'm not familiar with runtime PM's debug (yet, I need to
check it out), but if I'm debugging DSS, I'm not interested in runtime
PM's debug concerning some other drivers or any verbose details about
runtime PM.
So by having the wrappers I can just observe DSS debug, and see when DSS
enables/disables runtime PM etc.
If runtime PM's debug allows me to easily only see debugs about DSS,
then I agree that the wrappers are extra.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread
* [PATCHv2 21/28] OMAP4: HWMOD: Remove unneeded DSS opt clocks
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (19 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 20/28] OMAP: DSS2: Use PM runtime & HWMOD support Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 22/28] OMAP: DSS2: Remove unused opt_clock_available Tomi Valkeinen
` (7 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
Some of the optional clocks for dss_core are not needed. Remove them.
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 857bdda..d7d86b6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1164,10 +1164,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- { .role = "sys_clk", .clk = "dss_sys_clk" },
- { .role = "tv_clk", .clk = "dss_tv_clk" },
{ .role = "dss_clk", .clk = "dss_dss_clk" },
- { .role = "video_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_hwmod = {
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 22/28] OMAP: DSS2: Remove unused opt_clock_available
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (20 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 21/28] OMAP4: HWMOD: Remove unneeded DSS opt clocks Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 23/28] OMAP: DSS2: DISPC: remove finegrained clk enables/disables Tomi Valkeinen
` (6 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
opt_clock_available() is no longer needed, so remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/display.c | 12 ------------
include/video/omapdss.h | 2 --
2 files changed, 0 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index c7e19c4..af43620 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -46,17 +46,6 @@ static struct omap_device_pm_latency omap_dss_latency[] = {
/* oh_core is used for getting opt-clocks */
static struct omap_hwmod *oh_core;
-static bool opt_clock_available(const char *clk_role)
-{
- int i;
-
- for (i = 0; i < oh_core->opt_clks_cnt; i++) {
- if (!strcmp(oh_core->opt_clks[i].role, clk_role))
- return true;
- }
- return false;
-}
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -120,7 +109,6 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
pdata.board_data = board_data;
pdata.board_data->get_context_loss_count omap_pm_get_dev_context_loss_count;
- pdata.opt_clock_available = opt_clock_available;
for (i = 0; i < oh_count; i++) {
oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 4f914a5..06914b1 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -264,8 +264,6 @@ static inline int omap_display_init(struct omap_dss_board_info *board_data)
struct omap_display_platform_data {
struct omap_dss_board_info *board_data;
/* TODO: Additional members to be added when PM is considered */
-
- bool (*opt_clock_available)(const char *clk_role);
};
struct omap_video_timings {
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 23/28] OMAP: DSS2: DISPC: remove finegrained clk enables/disables
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (21 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 22/28] OMAP: DSS2: Remove unused opt_clock_available Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 24/28] OMAP: DSS2: Remove unused code from display.c Tomi Valkeinen
` (5 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
dispc.c enables and disables clocks in almost every function to make
sure the clocks are enabled when the function is called. This is rather
unoptimal way to handle the problem.
With pm_runtime other components have to call dispc_runtime_get() to
enable dispc clocks before calling any other dispc functions. Thus the
finegrained clk enables/disables can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 165 +++++----------------------------------
1 files changed, 19 insertions(+), 146 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 3f2265f..2de7e92 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -604,8 +604,6 @@ void dispc_go(enum omap_channel channel)
int bit;
bool enable_bit, go_bit;
- dispc_runtime_get();
-
if (channel = OMAP_DSS_CHANNEL_LCD ||
channel = OMAP_DSS_CHANNEL_LCD2)
bit = 0; /* LCDENABLE */
@@ -619,7 +617,7 @@ void dispc_go(enum omap_channel channel)
enable_bit = REG_GET(DISPC_CONTROL, bit, bit) = 1;
if (!enable_bit)
- goto end;
+ return;
if (channel = OMAP_DSS_CHANNEL_LCD ||
channel = OMAP_DSS_CHANNEL_LCD2)
@@ -634,7 +632,7 @@ void dispc_go(enum omap_channel channel)
if (go_bit) {
DSSERR("GO bit not down for channel %d\n", channel);
- goto end;
+ return;
}
DSSDBG("GO %s\n", channel = OMAP_DSS_CHANNEL_LCD ? "LCD" :
@@ -644,8 +642,6 @@ void dispc_go(enum omap_channel channel)
REG_FLD_MOD(DISPC_CONTROL2, 1, bit, bit);
else
REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit);
-end:
- dispc_runtime_put();
}
static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value)
@@ -1019,7 +1015,7 @@ static void _dispc_set_color_mode(enum omap_plane plane,
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), m, 4, 1);
}
-static void _dispc_set_channel_out(enum omap_plane plane,
+void dispc_set_channel_out(enum omap_plane plane,
enum omap_channel channel)
{
int shift;
@@ -1072,8 +1068,6 @@ void dispc_set_burst_size(enum omap_plane plane,
int shift;
u32 val;
- dispc_runtime_get();
-
switch (plane) {
case OMAP_DSS_GFX:
shift = 6;
@@ -1090,8 +1084,6 @@ void dispc_set_burst_size(enum omap_plane plane,
val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane));
val = FLD_MOD(val, burst_size, shift+1, shift);
dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val);
-
- dispc_runtime_put();
}
void dispc_enable_gamma_table(bool enable)
@@ -1128,9 +1120,7 @@ void dispc_enable_replication(enum omap_plane plane, bool enable)
else
bit = 10;
- dispc_runtime_get();
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, bit, bit);
- dispc_runtime_put();
}
void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
@@ -1138,9 +1128,7 @@ void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height)
u32 val;
BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
- dispc_runtime_get();
dispc_write_reg(DISPC_SIZE_MGR(channel), val);
- dispc_runtime_put();
}
void dispc_set_digit_size(u16 width, u16 height)
@@ -1148,9 +1136,7 @@ void dispc_set_digit_size(u16 width, u16 height)
u32 val;
BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
- dispc_runtime_get();
dispc_write_reg(DISPC_SIZE_MGR(OMAP_DSS_CHANNEL_DIGIT), val);
- dispc_runtime_put();
}
static void dispc_read_plane_fifo_sizes(void)
@@ -1159,8 +1145,6 @@ static void dispc_read_plane_fifo_sizes(void)
int plane;
u8 start, end;
- dispc_runtime_get();
-
dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end);
for (plane = 0; plane < ARRAY_SIZE(dispc.fifo_size); ++plane) {
@@ -1168,8 +1152,6 @@ static void dispc_read_plane_fifo_sizes(void)
start, end);
dispc.fifo_size[plane] = size;
}
-
- dispc_runtime_put();
}
u32 dispc_get_plane_fifo_size(enum omap_plane plane)
@@ -1184,8 +1166,6 @@ void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high)
dss_feat_get_reg_field(FEAT_REG_FIFOHIGHTHRESHOLD, &hi_start, &hi_end);
dss_feat_get_reg_field(FEAT_REG_FIFOLOWTHRESHOLD, &lo_start, &lo_end);
- dispc_runtime_get();
-
DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n",
plane,
REG_GET(DISPC_OVL_FIFO_THRESHOLD(plane),
@@ -1197,18 +1177,12 @@ void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high)
dispc_write_reg(DISPC_OVL_FIFO_THRESHOLD(plane),
FLD_VAL(high, hi_start, hi_end) |
FLD_VAL(low, lo_start, lo_end));
-
- dispc_runtime_put();
}
void dispc_enable_fifomerge(bool enable)
{
- dispc_runtime_get();
-
DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled");
REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
-
- dispc_runtime_put();
}
static void _dispc_set_fir(enum omap_plane plane,
@@ -1828,14 +1802,7 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
return dispc_pclk_rate(channel) * vf * hf;
}
-void dispc_set_channel_out(enum omap_plane plane, enum omap_channel channel_out)
-{
- dispc_runtime_get();
- _dispc_set_channel_out(plane, channel_out);
- dispc_runtime_put();
-}
-
-static int _dispc_setup_plane(enum omap_plane plane,
+int dispc_setup_plane(enum omap_plane plane,
u32 paddr, u16 screen_width,
u16 pos_x, u16 pos_y,
u16 width, u16 height,
@@ -1843,7 +1810,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
enum omap_color_mode color_mode,
bool ilace,
enum omap_dss_rotation_type rotation_type,
- u8 rotation, int mirror,
+ u8 rotation, bool mirror,
u8 global_alpha, u8 pre_mult_alpha,
enum omap_channel channel, u32 puv_addr)
{
@@ -1857,6 +1824,14 @@ static int _dispc_setup_plane(enum omap_plane plane,
u16 frame_height = height;
unsigned int field_offset = 0;
+ DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d,%d, %dx%d -> "
+ "%dx%d, ilace %d, cmode %x, rot %d, mir %d chan %d\n",
+ plane, paddr, screen_width, pos_x, pos_y,
+ width, height,
+ out_width, out_height,
+ ilace, color_mode,
+ rotation, mirror, channel);
+
if (paddr = 0)
return -EINVAL;
@@ -2002,9 +1977,13 @@ static int _dispc_setup_plane(enum omap_plane plane,
return 0;
}
-static void _dispc_enable_plane(enum omap_plane plane, bool enable)
+int dispc_enable_plane(enum omap_plane plane, bool enable)
{
+ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
+
REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 0, 0);
+
+ return 0;
}
static void dispc_disable_isr(void *data, u32 mask)
@@ -2028,8 +2007,6 @@ static void dispc_enable_lcd_out(enum omap_channel channel, bool enable)
int r;
u32 irq;
- dispc_runtime_get();
-
/* When we disable LCD output, we need to wait until frame is done.
* Otherwise the DSS is still working, and turning off the clocks
* prevents DSS from going to OFF mode */
@@ -2063,8 +2040,6 @@ static void dispc_enable_lcd_out(enum omap_channel channel, bool enable)
if (r)
DSSERR("failed to unregister FRAMEDONE isr\n");
}
-
- dispc_runtime_put();
}
static void _enable_digit_out(bool enable)
@@ -2077,12 +2052,8 @@ static void dispc_enable_digit_out(bool enable)
struct completion frame_done_completion;
int r;
- dispc_runtime_get();
-
- if (REG_GET(DISPC_CONTROL, 1, 1) = enable) {
- dispc_runtime_put();
+ if (REG_GET(DISPC_CONTROL, 1, 1) = enable)
return;
- }
if (enable) {
unsigned long flags;
@@ -2134,8 +2105,6 @@ static void dispc_enable_digit_out(bool enable)
_omap_dispc_set_irqs();
spin_unlock_irqrestore(&dispc.irq_lock, flags);
}
-
- dispc_runtime_put();
}
bool dispc_is_channel_enabled(enum omap_channel channel)
@@ -2166,9 +2135,7 @@ void dispc_lcd_enable_signal_polarity(bool act_high)
if (!dss_has_feature(FEAT_LCDENABLEPOL))
return;
- dispc_runtime_get();
REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29);
- dispc_runtime_put();
}
void dispc_lcd_enable_signal(bool enable)
@@ -2176,9 +2143,7 @@ void dispc_lcd_enable_signal(bool enable)
if (!dss_has_feature(FEAT_LCDENABLESIGNAL))
return;
- dispc_runtime_get();
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28);
- dispc_runtime_put();
}
void dispc_pck_free_enable(bool enable)
@@ -2186,19 +2151,15 @@ void dispc_pck_free_enable(bool enable)
if (!dss_has_feature(FEAT_PCKFREEENABLE))
return;
- dispc_runtime_get();
REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27);
- dispc_runtime_put();
}
void dispc_enable_fifohandcheck(enum omap_channel channel, bool enable)
{
- dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONFIG2, enable ? 1 : 0, 16, 16);
else
REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16);
- dispc_runtime_put();
}
@@ -2221,27 +2182,21 @@ void dispc_set_lcd_display_type(enum omap_channel channel,
return;
}
- dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONTROL2, mode, 3, 3);
else
REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3);
- dispc_runtime_put();
}
void dispc_set_loadmode(enum omap_dss_load_mode mode)
{
- dispc_runtime_get();
REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1);
- dispc_runtime_put();
}
void dispc_set_default_color(enum omap_channel channel, u32 color)
{
- dispc_runtime_get();
dispc_write_reg(DISPC_DEFAULT_COLOR(channel), color);
- dispc_runtime_put();
}
u32 dispc_get_default_color(enum omap_channel channel)
@@ -2252,9 +2207,7 @@ u32 dispc_get_default_color(enum omap_channel channel)
channel != OMAP_DSS_CHANNEL_LCD &&
channel != OMAP_DSS_CHANNEL_LCD2);
- dispc_runtime_get();
l = dispc_read_reg(DISPC_DEFAULT_COLOR(channel));
- dispc_runtime_put();
return l;
}
@@ -2263,7 +2216,6 @@ void dispc_set_trans_key(enum omap_channel ch,
enum omap_dss_trans_key_type type,
u32 trans_key)
{
- dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, type, 11, 11);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
@@ -2272,14 +2224,12 @@ void dispc_set_trans_key(enum omap_channel ch,
REG_FLD_MOD(DISPC_CONFIG2, type, 11, 11);
dispc_write_reg(DISPC_TRANS_COLOR(ch), trans_key);
- dispc_runtime_put();
}
void dispc_get_trans_key(enum omap_channel ch,
enum omap_dss_trans_key_type *type,
u32 *trans_key)
{
- dispc_runtime_get();
if (type) {
if (ch = OMAP_DSS_CHANNEL_LCD)
*type = REG_GET(DISPC_CONFIG, 11, 11);
@@ -2293,33 +2243,28 @@ void dispc_get_trans_key(enum omap_channel ch,
if (trans_key)
*trans_key = dispc_read_reg(DISPC_TRANS_COLOR(ch));
- dispc_runtime_put();
}
void dispc_enable_trans_key(enum omap_channel ch, bool enable)
{
- dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12);
else /* OMAP_DSS_CHANNEL_LCD2 */
REG_FLD_MOD(DISPC_CONFIG2, enable, 10, 10);
- dispc_runtime_put();
}
void dispc_enable_alpha_blending(enum omap_channel ch, bool enable)
{
if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
return;
- dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19);
else /* OMAP_DSS_CHANNEL_LCD2 */
REG_FLD_MOD(DISPC_CONFIG2, enable, 18, 18);
- dispc_runtime_put();
}
bool dispc_alpha_blending_enabled(enum omap_channel ch)
{
@@ -2328,7 +2273,6 @@ bool dispc_alpha_blending_enabled(enum omap_channel ch)
if (!dss_has_feature(FEAT_GLOBAL_ALPHA))
return false;
- dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
enabled = REG_GET(DISPC_CONFIG, 18, 18);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
@@ -2337,7 +2281,6 @@ bool dispc_alpha_blending_enabled(enum omap_channel ch)
enabled = REG_GET(DISPC_CONFIG2, 18, 18);
else
BUG();
- dispc_runtime_put();
return enabled;
}
@@ -2347,7 +2290,6 @@ bool dispc_trans_key_enabled(enum omap_channel ch)
{
bool enabled;
- dispc_runtime_get();
if (ch = OMAP_DSS_CHANNEL_LCD)
enabled = REG_GET(DISPC_CONFIG, 10, 10);
else if (ch = OMAP_DSS_CHANNEL_DIGIT)
@@ -2356,7 +2298,6 @@ bool dispc_trans_key_enabled(enum omap_channel ch)
enabled = REG_GET(DISPC_CONFIG2, 10, 10);
else
BUG();
- dispc_runtime_put();
return enabled;
}
@@ -2384,12 +2325,10 @@ void dispc_set_tft_data_lines(enum omap_channel channel, u8 data_lines)
return;
}
- dispc_runtime_get();
if (channel = OMAP_DSS_CHANNEL_LCD2)
REG_FLD_MOD(DISPC_CONTROL2, code, 9, 8);
else
REG_FLD_MOD(DISPC_CONTROL, code, 9, 8);
- dispc_runtime_put();
}
void dispc_set_parallel_interface_mode(enum omap_channel channel,
@@ -2421,8 +2360,6 @@ void dispc_set_parallel_interface_mode(enum omap_channel channel,
return;
}
- dispc_runtime_get();
-
if (channel = OMAP_DSS_CHANNEL_LCD2) {
l = dispc_read_reg(DISPC_CONTROL2);
l = FLD_MOD(l, stallmode, 11, 11);
@@ -2434,8 +2371,6 @@ void dispc_set_parallel_interface_mode(enum omap_channel channel,
l = FLD_MOD(l, gpout1, 16, 16);
dispc_write_reg(DISPC_CONTROL, l);
}
-
- dispc_runtime_put();
}
static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
@@ -2488,10 +2423,8 @@ static void _dispc_set_lcd_timings(enum omap_channel channel, int hsw,
FLD_VAL(vbp, 31, 20);
}
- dispc_runtime_get();
dispc_write_reg(DISPC_TIMING_H(channel), timing_h);
dispc_write_reg(DISPC_TIMING_V(channel), timing_v);
- dispc_runtime_put();
}
/* change name to mode? */
@@ -2534,10 +2467,8 @@ static void dispc_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
BUG_ON(lck_div < 1);
BUG_ON(pck_div < 2);
- dispc_runtime_get();
dispc_write_reg(DISPC_DIVISORo(channel),
FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
- dispc_runtime_put();
}
static void dispc_get_lcd_divisor(enum omap_channel channel, int *lck_div,
@@ -2997,9 +2928,7 @@ static void _dispc_set_pol_freq(enum omap_channel channel, bool onoff, bool rf,
l |= FLD_VAL(acbi, 11, 8);
l |= FLD_VAL(acb, 7, 0);
- dispc_runtime_get();
dispc_write_reg(DISPC_POL_FREQ(channel), l);
- dispc_runtime_put();
}
void dispc_set_pol_freq(enum omap_channel channel,
@@ -3120,15 +3049,11 @@ static void _omap_dispc_set_irqs(void)
mask |= isr_data->mask;
}
- dispc_runtime_get();
-
old_mask = dispc_read_reg(DISPC_IRQENABLE);
/* clear the irqstatus for newly enabled irqs */
dispc_write_reg(DISPC_IRQSTATUS, (mask ^ old_mask) & mask);
dispc_write_reg(DISPC_IRQENABLE, mask);
-
- dispc_runtime_put();
}
int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
@@ -3662,58 +3587,6 @@ static void _omap_dispc_initial_config(void)
dispc_read_plane_fifo_sizes();
}
-int dispc_enable_plane(enum omap_plane plane, bool enable)
-{
- DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
-
- dispc_runtime_get();
- _dispc_enable_plane(plane, enable);
- dispc_runtime_put();
-
- return 0;
-}
-
-int dispc_setup_plane(enum omap_plane plane,
- u32 paddr, u16 screen_width,
- u16 pos_x, u16 pos_y,
- u16 width, u16 height,
- u16 out_width, u16 out_height,
- enum omap_color_mode color_mode,
- bool ilace,
- enum omap_dss_rotation_type rotation_type,
- u8 rotation, bool mirror, u8 global_alpha,
- u8 pre_mult_alpha, enum omap_channel channel,
- u32 puv_addr)
-{
- int r = 0;
-
- DSSDBG("dispc_setup_plane %d, pa %x, sw %d, %d, %d, %dx%d -> "
- "%dx%d, ilace %d, cmode %x, rot %d, mir %d chan %d\n",
- plane, paddr, screen_width, pos_x, pos_y,
- width, height,
- out_width, out_height,
- ilace, color_mode,
- rotation, mirror, channel);
-
- dispc_runtime_get();
-
- r = _dispc_setup_plane(plane,
- paddr, screen_width,
- pos_x, pos_y,
- width, height,
- out_width, out_height,
- color_mode, ilace,
- rotation_type,
- rotation, mirror,
- global_alpha,
- pre_mult_alpha,
- channel, puv_addr);
-
- dispc_runtime_put();
-
- return r;
-}
-
/* DISPC HW IP initialisation */
static int omap_dispchw_probe(struct platform_device *pdev)
{
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 24/28] OMAP: DSS2: Remove unused code from display.c
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (22 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 23/28] OMAP: DSS2: DISPC: remove finegrained clk enables/disables Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 25/28] OMAP: DSS2: Remove ctx loss count from dss.c Tomi Valkeinen
` (4 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
oh_core variable is no longer used, so it and its initialization can be
removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/display.c | 10 ----------
1 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index af43620..a5b7a23 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -43,9 +43,6 @@ static struct omap_device_pm_latency omap_dss_latency[] = {
},
};
-/* oh_core is used for getting opt-clocks */
-static struct omap_hwmod *oh_core;
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -99,13 +96,6 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
}
- /* opt_clks are always associated with dss hwmod */
- oh_core = omap_hwmod_lookup("dss_core");
- if (!oh_core) {
- pr_err("Could not look up dss_core.\n");
- return -ENODEV;
- }
-
pdata.board_data = board_data;
pdata.board_data->get_context_loss_count omap_pm_get_dev_context_loss_count;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 25/28] OMAP: DSS2: Remove ctx loss count from dss.c
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (23 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 24/28] OMAP: DSS2: Remove unused code from display.c Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 26/28] OMAP4: CLKDEV: Remove omapdss clock aliases Tomi Valkeinen
` (3 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
dss.c only saves 1 register (3 in OMAP3) so the extra overhead from
need_ctx_restore & co. is probably bigger than the time spent saving and
restoring those few registers every time.
So remove the code from dss.c and restore context every time dss has
been off.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dss.c | 62 +----------------------------------------
1 files changed, 1 insertions(+), 61 deletions(-)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 4e36a07..21c8389 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -62,8 +62,6 @@ static struct {
struct platform_device *pdev;
void __iomem *base;
- int ctx_loss_cnt;
-
struct clk *dpll4_m4_ck;
struct clk *dss_clk;
@@ -631,61 +629,6 @@ void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select hdmi)
REG_FLD_MOD(DSS_CONTROL, hdmi, 15, 15); /* VENC_HDMI_SWITCH */
}
-/* CONTEXT */
-static void dss_init_ctx_loss_count(void)
-{
- struct device *dev = &dss.pdev->dev;
- struct omap_display_platform_data *pdata = dev->platform_data;
- struct omap_dss_board_info *board_data = pdata->board_data;
- int cnt = 0;
-
- /*
- * get_context_loss_count returns negative on error. We'll ignore the
- * error and store the error to ctx_loss_cnt, which will cause
- * dss_need_ctx_restore() call to return true.
- */
-
- if (board_data->get_context_loss_count)
- cnt = board_data->get_context_loss_count(dev);
-
- WARN_ON(cnt < 0);
-
- dss.ctx_loss_cnt = cnt;
-
- DSSDBG("initial ctx_loss_cnt %u\n", cnt);
-}
-
-static bool dss_need_ctx_restore(void)
-{
- struct device *dev = &dss.pdev->dev;
- struct omap_display_platform_data *pdata = dev->platform_data;
- struct omap_dss_board_info *board_data = pdata->board_data;
- int cnt;
-
- /*
- * If get_context_loss_count is not available, assume that we need
- * context restore always.
- */
- if (!board_data->get_context_loss_count)
- return true;
-
- cnt = board_data->get_context_loss_count(dev);
- if (cnt < 0) {
- dev_err(dev, "getting context loss count failed, will force "
- "context restore\n");
- dss.ctx_loss_cnt = cnt;
- return true;
- }
-
- if (cnt = dss.ctx_loss_cnt)
- return false;
-
- DSSDBG("ctx_loss_cnt %d -> %d\n", dss.ctx_loss_cnt, cnt);
- dss.ctx_loss_cnt = cnt;
-
- return true;
-}
-
static int dss_get_clocks(void)
{
struct clk *clk;
@@ -797,8 +740,6 @@ static int omap_dsshw_probe(struct platform_device *pdev)
if (r)
goto err_clocks;
- dss_init_ctx_loss_count();
-
pm_runtime_enable(&pdev->dev);
r = dss_runtime_get();
@@ -875,8 +816,7 @@ static int dss_runtime_suspend(struct device *dev)
static int dss_runtime_resume(struct device *dev)
{
clk_enable(dss.dss_clk);
- if (dss_need_ctx_restore())
- dss_restore_context();
+ dss_restore_context();
return 0;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 26/28] OMAP4: CLKDEV: Remove omapdss clock aliases
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (24 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 25/28] OMAP: DSS2: Remove ctx loss count from dss.c Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 27/28] OMAP: DSS2: DISPC: Fix context save/restore Tomi Valkeinen
` (2 subsequent siblings)
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
omapdss driver now gets the clocks via hwmod opt clocks, so clock
aliases for omapdss_dss are no longer needed.
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/clock44xx_data.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 8c96567..4d278e7 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3114,11 +3114,11 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
CLK(NULL, "dmic_fck", &dmic_fck, CK_443X),
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
- CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X),
- CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X),
- CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X),
- CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X),
- CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
+ CLK(NULL, "sys_clk", &dss_sys_clk, CK_443X),
+ CLK(NULL, "tv_clk", &dss_tv_clk, CK_443X),
+ CLK(NULL, "video_clk", &dss_48mhz_clk, CK_443X),
+ CLK(NULL, "fck", &dss_dss_clk, CK_443X),
+ CLK(NULL, "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
CLK(NULL, "emif2_fck", &emif2_fck, CK_443X),
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 27/28] OMAP: DSS2: DISPC: Fix context save/restore
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (25 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 26/28] OMAP4: CLKDEV: Remove omapdss clock aliases Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 13:56 ` [PATCHv2 28/28] OMAP: DSS2: DSS: " Tomi Valkeinen
2011-06-09 14:27 ` [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
The current method of saving and restoring the context could cause a
restore before saving, effectively "restoring" zero values to registers.
Add ctx_valid field to indicate if the saved context is valid and can be
restored.
Also restructure the code to save the ctx_loss_count in save_context(),
which makes more sense than the previous method of storing new
ctx_loss_count in dispc_need_ctx_restore.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 97 +++++++++++++++-----------------------
1 files changed, 38 insertions(+), 59 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 2de7e92..eac768f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -108,6 +108,7 @@ static struct {
u32 error_irqs;
struct work_struct error_work;
+ bool ctx_valid;
u32 ctx[DISPC_SZ_REGS / sizeof(u32)];
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
@@ -140,6 +141,23 @@ static inline u32 dispc_read_reg(const u16 idx)
return __raw_readl(dispc.base + idx);
}
+static int dispc_get_ctx_loss_count(void)
+{
+ struct device *dev = &dispc.pdev->dev;
+ struct omap_display_platform_data *pdata = dev->platform_data;
+ struct omap_dss_board_info *board_data = pdata->board_data;
+ int cnt;
+
+ if (!board_data->get_context_loss_count)
+ return -ENOENT;
+
+ cnt = board_data->get_context_loss_count(dev);
+
+ WARN_ONCE(cnt < 0, "get_context_loss_count failed: %d\n", cnt);
+
+ return cnt;
+}
+
#define SR(reg) \
dispc.ctx[DISPC_##reg / sizeof(u32)] = dispc_read_reg(DISPC_##reg)
#define RR(reg) \
@@ -316,14 +334,30 @@ static void dispc_save_context(void)
if (dss_has_feature(FEAT_CORE_CLK_DIV))
SR(DIVISOR);
+
+ dispc.ctx_loss_cnt = dispc_get_ctx_loss_count();
+ dispc.ctx_valid = true;
+
+ DSSDBG("context saved, ctx_loss_count %d\n", dispc.ctx_loss_cnt);
}
static void dispc_restore_context(void)
{
- int i;
+ int i, ctx;
DSSDBG("dispc_restore_context\n");
+ if (!dispc.ctx_valid)
+ return;
+
+ ctx = dispc_get_ctx_loss_count();
+
+ if (ctx >= 0 && ctx = dispc.ctx_loss_cnt)
+ return;
+
+ DSSDBG("ctx_loss_count: saved %d, current %d\n",
+ dispc.ctx_loss_cnt, ctx);
+
/*RR(IRQENABLE);*/
/*RR(CONTROL);*/
RR(CONFIG);
@@ -502,65 +536,13 @@ static void dispc_restore_context(void)
* the context is fully restored
*/
RR(IRQENABLE);
+
+ DSSDBG("context restored\n");
}
#undef SR
#undef RR
-static void dispc_init_ctx_loss_count(void)
-{
- struct device *dev = &dispc.pdev->dev;
- struct omap_display_platform_data *pdata = dev->platform_data;
- struct omap_dss_board_info *board_data = pdata->board_data;
- int cnt = 0;
-
- /*
- * get_context_loss_count returns negative on error. We'll ignore the
- * error and store the error to ctx_loss_cnt, which will cause
- * dispc_need_ctx_restore() call to return true.
- */
-
- if (board_data->get_context_loss_count)
- cnt = board_data->get_context_loss_count(dev);
-
- WARN_ON(cnt < 0);
-
- dispc.ctx_loss_cnt = cnt;
-
- DSSDBG("initial ctx_loss_cnt %u\n", cnt);
-}
-
-static bool dispc_need_ctx_restore(void)
-{
- struct device *dev = &dispc.pdev->dev;
- struct omap_display_platform_data *pdata = dev->platform_data;
- struct omap_dss_board_info *board_data = pdata->board_data;
- int cnt;
-
- /*
- * If get_context_loss_count is not available, assume that we need
- * context restore always.
- */
- if (!board_data->get_context_loss_count)
- return true;
-
- cnt = board_data->get_context_loss_count(dev);
- if (cnt < 0) {
- dev_err(dev, "getting context loss count failed, will force "
- "context restore\n");
- dispc.ctx_loss_cnt = cnt;
- return true;
- }
-
- if (cnt = dispc.ctx_loss_cnt)
- return false;
-
- DSSDBG("ctx_loss_cnt %d -> %d\n", dispc.ctx_loss_cnt, cnt);
- dispc.ctx_loss_cnt = cnt;
-
- return true;
-}
-
int dispc_runtime_get(void)
{
int r;
@@ -3641,8 +3623,6 @@ static int omap_dispchw_probe(struct platform_device *pdev)
goto err_irq;
}
- dispc_init_ctx_loss_count();
-
pm_runtime_enable(&pdev->dev);
r = dispc_runtime_get();
@@ -3701,8 +3681,7 @@ static int dispc_runtime_resume(struct device *dev)
return r;
clk_enable(dispc.dss_clk);
- if (dispc_need_ctx_restore())
- dispc_restore_context();
+ dispc_restore_context();
return 0;
}
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* [PATCHv2 28/28] OMAP: DSS2: DSS: Fix context save/restore
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (26 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 27/28] OMAP: DSS2: DISPC: Fix context save/restore Tomi Valkeinen
@ 2011-06-09 13:56 ` Tomi Valkeinen
2011-06-09 14:27 ` [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 13:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: b-cousson, paul, khilman, Tomi Valkeinen
The current method of saving and restoring the context could cause a
restore before saving, effectively "restoring" zero values to registers.
Add ctx_valid field to indicate if the saved context is valid and can be
restored.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dss.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 21c8389..5c6499a 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -74,6 +74,7 @@ static struct {
enum omap_dss_clk_source dispc_clk_source;
enum omap_dss_clk_source lcd_clk_source[MAX_DSS_LCD_MANAGERS];
+ bool ctx_valid;
u32 ctx[DSS_SZ_REGS / sizeof(u32)];
} dss;
@@ -109,12 +110,19 @@ static void dss_save_context(void)
SR(SDI_CONTROL);
SR(PLL_CONTROL);
}
+
+ dss.ctx_valid = true;
+
+ DSSDBG("context saved\n");
}
static void dss_restore_context(void)
{
DSSDBG("dss_restore_context\n");
+ if (!dss.ctx_valid)
+ return;
+
RR(CONTROL);
if (dss_feat_get_supported_displays(OMAP_DSS_CHANNEL_LCD) &
@@ -122,6 +130,8 @@ static void dss_restore_context(void)
RR(SDI_CONTROL);
RR(PLL_CONTROL);
}
+
+ DSSDBG("context restored\n");
}
#undef SR
--
1.7.4.1
^ permalink raw reply related [flat|nested] 54+ messages in thread* Re: [PATCHv2 00/28] OMAP DSS runtime PM adaptation
2011-06-09 13:56 [PATCHv2 00/28] OMAP DSS runtime PM adaptation Tomi Valkeinen
` (27 preceding siblings ...)
2011-06-09 13:56 ` [PATCHv2 28/28] OMAP: DSS2: DSS: " Tomi Valkeinen
@ 2011-06-09 14:27 ` Tomi Valkeinen
28 siblings, 0 replies; 54+ messages in thread
From: Tomi Valkeinen @ 2011-06-09 14:27 UTC (permalink / raw)
To: linux-omap; +Cc: linux-fbdev, b-cousson, paul, khilman
On Thu, 2011-06-09 at 16:56 +0300, Tomi Valkeinen wrote:
> Hi,
>
> This patch set implements runtime PM adaptation for OMAP DSS driver.
> These patches can be found from:
>
> git://gitorious.org/linux-omap-dss2/linux.git pmruntime
The branch is actually "pmruntime-v2", my mistake.
Tomi
^ permalink raw reply [flat|nested] 54+ messages in thread