From: Sachin Kamat <sachin.kamat@linaro.org>
To: linux-fbdev@vger.kernel.org
Subject: Re: [PATCH] video: exynos_mipi_dsi: Use devm_* APIs
Date: Wed, 09 Jan 2013 04:56:01 +0000 [thread overview]
Message-ID: <CAK9yfHxcFpy2XQ_502Q-qe7BMnBKFVZPQn-ENPA1MahwcupYGA@mail.gmail.com> (raw)
In-Reply-To: <1357196444-8077-1-git-send-email-sachin.kamat@linaro.org>
Hi Donghwa,
Any comments on this patch?
On 3 January 2013 12:30, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> devm_* APIs are device managed and make exit and cleanup code simpler.
> While at it also remove some unused labels and fix an error path.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
> Compile tested using the latest linux-next tree.
> This patch should be applied on top of the following patch:
> http://www.spinics.net/lists/linux-fbdev/msg09303.html
> ---
> drivers/video/exynos/exynos_mipi_dsi.c | 68 ++++++++------------------------
> include/video/exynos_mipi_dsim.h | 1 -
> 2 files changed, 17 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
> index f623dfc..fac7df6 100644
> --- a/drivers/video/exynos/exynos_mipi_dsi.c
> +++ b/drivers/video/exynos/exynos_mipi_dsi.c
> @@ -338,7 +338,8 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
> struct mipi_dsim_ddi *dsim_ddi;
> int ret = -EINVAL;
>
> - dsim = kzalloc(sizeof(struct mipi_dsim_device), GFP_KERNEL);
> + dsim = devm_kzalloc(&pdev->dev, sizeof(struct mipi_dsim_device),
> + GFP_KERNEL);
> if (!dsim) {
> dev_err(&pdev->dev, "failed to allocate dsim object.\n");
> return -ENOMEM;
> @@ -352,13 +353,13 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
> dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
> if (dsim_pd = NULL) {
> dev_err(&pdev->dev, "failed to get platform data for dsim.\n");
> - goto err_clock_get;
> + return -EINVAL;
> }
> /* get mipi_dsim_config. */
> dsim_config = dsim_pd->dsim_config;
> if (dsim_config = NULL) {
> dev_err(&pdev->dev, "failed to get dsim config data.\n");
> - goto err_clock_get;
> + return -EINVAL;
> }
>
> dsim->dsim_config = dsim_config;
> @@ -366,41 +367,28 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
>
> mutex_init(&dsim->lock);
>
> - ret = regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies), supplies);
> + ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies),
> + supplies);
> if (ret) {
> dev_err(&pdev->dev, "Failed to get regulators: %d\n", ret);
> - goto err_clock_get;
> + return ret;
> }
>
> - dsim->clock = clk_get(&pdev->dev, "dsim0");
> + dsim->clock = devm_clk_get(&pdev->dev, "dsim0");
> if (IS_ERR(dsim->clock)) {
> dev_err(&pdev->dev, "failed to get dsim clock source\n");
> - ret = -ENODEV;
> - goto err_clock_get;
> + return -ENODEV;
> }
>
> clk_enable(dsim->clock);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res) {
> - dev_err(&pdev->dev, "failed to get io memory region\n");
> - ret = -ENODEV;
> - goto err_platform_get;
> - }
> -
> - dsim->res = request_mem_region(res->start, resource_size(res),
> - dev_name(&pdev->dev));
> - if (!dsim->res) {
> - dev_err(&pdev->dev, "failed to request io memory region\n");
> - ret = -ENOMEM;
> - goto err_mem_region;
> - }
>
> - dsim->reg_base = ioremap(res->start, resource_size(res));
> + dsim->reg_base = devm_request_and_ioremap(&pdev->dev, res);
> if (!dsim->reg_base) {
> dev_err(&pdev->dev, "failed to remap io region\n");
> ret = -ENOMEM;
> - goto err_ioremap;
> + goto error;
> }
>
> mutex_init(&dsim->lock);
> @@ -410,26 +398,27 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
> if (!dsim_ddi) {
> dev_err(&pdev->dev, "mipi_dsim_ddi object not found.\n");
> ret = -EINVAL;
> - goto err_bind;
> + goto error;
> }
>
> dsim->irq = platform_get_irq(pdev, 0);
> if (IS_ERR_VALUE(dsim->irq)) {
> dev_err(&pdev->dev, "failed to request dsim irq resource\n");
> ret = -EINVAL;
> - goto err_platform_get_irq;
> + goto error;
> }
>
> init_completion(&dsim_wr_comp);
> init_completion(&dsim_rd_comp);
> platform_set_drvdata(pdev, dsim);
>
> - ret = request_irq(dsim->irq, exynos_mipi_dsi_interrupt_handler,
> + ret = devm_request_irq(&pdev->dev, dsim->irq,
> + exynos_mipi_dsi_interrupt_handler,
> IRQF_SHARED, dev_name(&pdev->dev), dsim);
> if (ret != 0) {
> dev_err(&pdev->dev, "failed to request dsim irq\n");
> ret = -EINVAL;
> - goto err_bind;
> + goto error;
> }
>
> /* enable interrupts */
> @@ -471,22 +460,8 @@ done:
>
> return 0;
>
> -err_bind:
> - iounmap(dsim->reg_base);
> -
> -err_ioremap:
> - release_mem_region(dsim->res->start, resource_size(dsim->res));
> -
> -err_mem_region:
> - release_resource(dsim->res);
> -
> -err_platform_get:
> +error:
> clk_disable(dsim->clock);
> - clk_put(dsim->clock);
> -err_clock_get:
> - kfree(dsim);
> -
> -err_platform_get_irq:
> return ret;
> }
>
> @@ -496,13 +471,7 @@ static int exynos_mipi_dsi_remove(struct platform_device *pdev)
> struct mipi_dsim_ddi *dsim_ddi, *next;
> struct mipi_dsim_lcd_driver *dsim_lcd_drv;
>
> - iounmap(dsim->reg_base);
> -
> clk_disable(dsim->clock);
> - clk_put(dsim->clock);
> -
> - release_resource(dsim->res);
> - release_mem_region(dsim->res->start, resource_size(dsim->res));
>
> list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
> if (dsim_ddi) {
> @@ -518,9 +487,6 @@ static int exynos_mipi_dsi_remove(struct platform_device *pdev)
> }
> }
>
> - regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
> - kfree(dsim);
> -
> return 0;
> }
>
> diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
> index 83ce5e6..89dc88a 100644
> --- a/include/video/exynos_mipi_dsim.h
> +++ b/include/video/exynos_mipi_dsim.h
> @@ -220,7 +220,6 @@ struct mipi_dsim_config {
> struct mipi_dsim_device {
> struct device *dev;
> int id;
> - struct resource *res;
> struct clk *clock;
> unsigned int irq;
> void __iomem *reg_base;
> --
> 1.7.4.1
>
--
With warm regards,
Sachin
next prev parent reply other threads:[~2013-01-09 4:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-03 7:12 [PATCH] video: exynos_mipi_dsi: Use devm_* APIs Sachin Kamat
2013-01-09 4:56 ` Sachin Kamat [this message]
2013-01-09 10:12 ` Donghwa Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAK9yfHxcFpy2XQ_502Q-qe7BMnBKFVZPQn-ENPA1MahwcupYGA@mail.gmail.com \
--to=sachin.kamat@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).