From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
To: linux-fbdev@vger.kernel.org
Subject: Re: [PATCH 25/57] sh_mobile_lcdc: Add display notify callback to
Date: Fri, 16 Dec 2011 09:40:48 +0000 [thread overview]
Message-ID: <Pine.LNX.4.64.1112161040110.6572@axis700.grange> (raw)
In-Reply-To: <1323784972-24205-26-git-send-email-laurent.pinchart@ideasonboard.com>
On Tue, 13 Dec 2011, Laurent Pinchart wrote:
> The callback implements 3 notification events:
>
> - SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT notifies the LCDC that the
> display has been connected
> - SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT notifies the LCDC that the
> display has been disconnected
> - SH_MOBILE_LCDC_EVENT_DISPLAY_MODE notifies that LCDC that a display
> mode has been detected
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/video/sh_mobile_lcdcfb.c | 81 ++++++++++++++++++++++++++++++++++++++
> drivers/video/sh_mobile_lcdcfb.h | 10 +++++
> 2 files changed, 91 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
> index 4b03aa5..21e5f10 100644
> --- a/drivers/video/sh_mobile_lcdcfb.c
> +++ b/drivers/video/sh_mobile_lcdcfb.c
> @@ -363,6 +363,86 @@ static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
> ch->tx_dev->ops->display_off(ch->tx_dev);
> }
>
> +static bool
> +sh_mobile_lcdc_must_reconfigure(struct sh_mobile_lcdc_chan *ch,
> + const struct fb_var_screeninfo *new_var)
> +{
> + struct fb_var_screeninfo *old_var = &ch->display_var;
> + struct fb_videomode old_mode;
> + struct fb_videomode new_mode;
> +
> + fb_var_to_videomode(&old_mode, old_var);
> + fb_var_to_videomode(&new_mode, new_var);
> +
> + dev_dbg(ch->info->dev, "Old %ux%u, new %ux%u\n",
> + old_mode.xres, old_mode.yres, new_mode.xres, new_mode.yres);
> +
> + if (fb_mode_is_equal(&old_mode, &new_mode)) {
> + /* It can be a different monitor with an equal video-mode */
> + old_var->width = new_var->width;
> + old_var->height = new_var->height;
> + return false;
> + }
> +
> + dev_dbg(ch->info->dev, "Switching %u -> %u lines\n",
> + old_mode.yres, new_mode.yres);
> + *old_var = *new_var;
> +
> + return true;
> +}
> +
> +static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
> + enum sh_mobile_lcdc_entity_event event,
> + struct fb_var_screeninfo *var)
> +{
> + struct fb_info *info = ch->info;
> + int ret = 0;
> +
> + switch (event) {
> + case SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT:
> + /* HDMI plug in */
> + if (lock_fb_info(info)) {
> + console_lock();
> +
> + if (!sh_mobile_lcdc_must_reconfigure(ch, var) &&
> + info->state = FBINFO_STATE_RUNNING) {
> + /* First activation with the default monitor.
> + * Just turn on, if we run a resume here, the
> + * logo disappears.
> + */
> + info->var.width = var->width;
> + info->var.height = var->height;
> + sh_mobile_lcdc_display_on(ch);
> + } else {
> + /* New monitor or have to wake up */
> + fb_set_suspend(info, 0);
> + }
> +
> + console_unlock();
> + unlock_fb_info(info);
> + }
> + break;
> +
> + case SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT:
> + /* HDMI disconnect */
> + if (lock_fb_info(info)) {
> + console_lock();
> + fb_set_suspend(info, 1);
> + console_unlock();
> + unlock_fb_info(info);
> + }
> + break;
> +
> + case SH_MOBILE_LCDC_EVENT_DISPLAY_MODE:
> + /* Validate a proposed new mode */
> + var->bits_per_pixel = info->var.bits_per_pixel;
> + ret = info->fbops->fb_check_var(var, info);
You can call sh_mobile_lcdc_check_var() directly here too, right?
Thanks
Guennadi
> + break;
> + }
> +
> + return ret;
> +}
> +
> /* -----------------------------------------------------------------------------
> * Format helpers
> */
> @@ -1591,6 +1671,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
> int i;
>
> mutex_init(&ch->open_lock);
> + ch->notify = sh_mobile_lcdc_display_notify;
>
> /* Allocate the frame buffer device. */
> ch->info = framebuffer_alloc(0, priv->dev);
> diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
> index 6fb956c..e2eb7af 100644
> --- a/drivers/video/sh_mobile_lcdcfb.h
> +++ b/drivers/video/sh_mobile_lcdcfb.h
> @@ -30,6 +30,12 @@ struct sh_mobile_lcdc_entity_ops {
> void (*display_off)(struct sh_mobile_lcdc_entity *entity);
> };
>
> +enum sh_mobile_lcdc_entity_event {
> + SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT,
> + SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT,
> + SH_MOBILE_LCDC_EVENT_DISPLAY_MODE,
> +};
> +
> struct sh_mobile_lcdc_entity {
> struct module *owner;
> const struct sh_mobile_lcdc_entity_ops *ops;
> @@ -70,6 +76,10 @@ struct sh_mobile_lcdc_chan {
> unsigned long base_addr_y;
> unsigned long base_addr_c;
> unsigned int pitch;
> +
> + int (*notify)(struct sh_mobile_lcdc_chan *ch,
> + enum sh_mobile_lcdc_entity_event event,
> + struct fb_var_screeninfo *var);
> };
>
> #endif
> --
> 1.7.3.4
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
next prev parent reply other threads:[~2011-12-16 9:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-13 14:02 [PATCH 25/57] sh_mobile_lcdc: Add display notify callback to sh_mobile_lcdc_chan Laurent Pinchart
2011-12-16 9:40 ` Guennadi Liakhovetski [this message]
2011-12-16 10:22 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.1112161040110.6572@axis700.grange \
--to=g.liakhovetski@gmx.de \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox