linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
To: Helge Deller <deller@gmx.de>
Cc: Simona Vetter <simona@ffwll.ch>,
	syzbot+48b0652a95834717f190@syzkaller.appspotmail.com,
	linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds
Date: Wed, 15 Oct 2025 21:45:31 -0400	[thread overview]
Message-ID: <aPBOOyrV3ihF_Bpq@arch-box> (raw)
In-Reply-To: <b4af6e84-6555-4629-8291-fc4c2c99390b@gmx.de>

On Sat, Oct 04, 2025 at 02:43:33AM +0200, Helge Deller wrote:
> On 10/3/25 09:32, Albin Babu Varghese wrote:
> > Add bounds checking to prevent writes past framebuffer boundaries when
> > rendering text near screen edges. Return early if the Y position is off-screen
> > and clip image height to screen boundary. Break from the rendering loop if the
> > X position is off-screen. When clipping image width to fit the screen, update
> > the character count to match the clipped width to prevent buffer size
> > mismatches.
> > 
> > Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
> > receive mismatched parameters where the buffer is allocated for the clipped
> > width but cnt reflects the original larger count, causing out-of-bounds writes.
> > 
> > Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
> > Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
> > Suggested-by: Helge Deller <deller@gmx.de>
> > Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
> > Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
> > ---
> > Changes in v2:
> > - Partially render when height exceeding screen boundaries instead of skipping
> > - Update character count when width is clipped to prevent buffer mismatch
> > 
> > Link to v1:
> > https://lore.kernel.org/all/20250927075010.119671-1-albinbabuvarghese20@gmail.com/
> > ---
> >   drivers/video/fbdev/core/bitblit.c | 20 ++++++++++++++++++++
> >   1 file changed, 20 insertions(+)
> 
> applied.
> 
> Thanks!
> Helge
Thank you for merging the patch.

After the patch appeared in mainline, I observed that syzbot continues
to find the same bug through different execution paths. My fix addressed
bit_putcs, but the crashes now occur through bit_cursor and cw_putcs,
which bypass bit_putcs entirely and go directly to sys_imageblit():

Crash 1 (cursor path):
https://syzkaller.appspot.com/text?tag=CrashReport&x=11fe95e2580000
Call trace: hide_cursor → bit_cursor → soft_cursor → sys_imageblit

Crash 2 (rotation path):
https://syzkaller.appspot.com/text?tag=CrashReport&x=164f0b04580000
Call trace: fbcon_modechanged → cw_putcs → sys_imageblit

The original syzbot reproducer depended on character height going out of
bounds, so I focused on bit_putcs where character images are drawn. I
naively overlooked cursor drawing - apologies for that. That's why I
looked at the other crash reports after the merge, because it seemed odd
that it was still hitting the bug after the fix.

I believe adding the same clipping logic in sys_imageblit() would provide
comprehensive protection. Something like this:

void sys_imageblit(struct fb_info *p, const struct fb_image *image)
  {
 +       struct fb_image clipped;
 +       u32 width, height;
 +
         if (!(p->flags & FBINFO_VIRTFB))
                 fb_warn_once(p, "%s: framebuffer is not in virtual address space.\n", __func__);
 
 -       fb_imageblit(p, image);
 +       if (!image || image->dx >= p->var.xres || image->dy >= p->var.yres)
 +               return;
 +
 +       if (image->dx + image->width > p->var.xres || image->dy + image->height > p->var.yres) {
 +               clipped = *image;
 +
 +               height = clipped.height;
 +               if (clipped.dy + height > p->var.yres)
 +                       height = p->var.yres - clipped.dy;
 +
 +               clipped.height = height;
 +
 +               width = clipped.width;
 +               if (clipped.dx + width > p->var.xres)
 +                       width = p->var.xres - clipped.dx;
 +
 +               clipped.width = width;
 +
 +               if (clipped.width == 0 || clipped.height == 0)
 +                       return;
 +
 +               fb_imageblit(p, &clipped);
 +       } else {
 +               fb_imageblit(p, image);
 +       }
  }
 
I don't have any way to test this other than testing it with the existing
reproducers. I can prepare a patch if this approach sounds reasonable.

Thanks,
Albin

      reply	other threads:[~2025-10-16  1:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-03  7:32 [PATCH v2] fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds Albin Babu Varghese
2025-10-04  0:43 ` Helge Deller
2025-10-16  1:45   ` Albin Babu Varghese [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aPBOOyrV3ihF_Bpq@arch-box \
    --to=albinbabuvarghese20@gmail.com \
    --cc=deller@gmx.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=simona@ffwll.ch \
    --cc=syzbot+48b0652a95834717f190@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).