From mboxrd@z Thu Jan 1 00:00:00 1970 From: Finn Thain Date: Sun, 26 Sep 2010 09:43:03 +0000 Subject: Re: [RFC 1/3 v3]update web addresses in the kernel Message-Id: List-Id: References: <1285373337-10945-1-git-send-email-justinmattock@gmail.com> In-Reply-To: <1285373337-10945-1-git-send-email-justinmattock@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: "Justin P. Mattock" Cc: trivial@kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, linux-usb@vger.kernel.org, linux-scsi@vger.kernel.org, linux-fbdev@vger.kernel.org, alsa-devel@alsa-project.org, dri-devel@lists.freedesktop.org, linux-ide@vger.kernel.org, "Maciej W. Rozycki" , Geert Uytterhoeven , Randy Dunlap , Matt Turner , Dimitry Torokhov , Mike Frysinger Hi Justin, Some comments on your latest patch follow. On Fri, 24 Sep 2010, Justin P. Mattock wrote: > --- a/drivers/ata/pata_it821x.c > +++ b/drivers/ata/pata_it821x.c > @@ -16,7 +16,7 @@ > * Based in part on the ITE vendor provided SCSI driver. > * > * Documentation available from > - * http://www.ite.com.tw/pc/IT8212F_V04.pdf > + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3D3&ID=3D5,91= =09 The existence of the pdf could be useful information when one needs to=20 locate a copy. I think the filename needs to be retained. > * Some other documents are NDA. > * > * The ITE8212 isn't exactly a standard IDE controller. It has two > diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_eda= c.c > index a2fa1fe..adb6574 100644 > --- a/drivers/edac/i82443bxgx_edac.c > +++ b/drivers/edac/i82443bxgx_edac.c > @@ -12,7 +12,7 @@ > * 440GX fix by Jason Uhlenkott . > * > * Written with reference to 82443BX Host Bridge Datasheet: > - * http://www.intel.com/design/chipsets/440/documentation.htm > + * http://ark.intel.com/Product.aspx?id'151=20 That's the wrong document. It refers to processor number 440 not the *440=20 chipsets. Google offers this link: http://download.intel.com/design/chipsets/datashts/29063301.pdf > * references to this document given in []. > * > * This module doesn't support the 440LX, but it may be possible to > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig > index 280c9b5..aec5691 100644 > --- a/drivers/firmware/Kconfig > +++ b/drivers/firmware/Kconfig > @@ -74,7 +74,8 @@ config EFI_PCDP > =20 > You must also enable the appropriate drivers (serial, VGA, etc.) > =20 > - See > + See DIG64_HCDPv20_042804.pdf available from > + =20 Can you do the same for IT8212F_V04.pdf above? > =20 > config DELL_RBU > tristate "BIOS update support for DELL systems via sysfs" > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > index 949326d..f3e9d45 100644 > --- a/drivers/gpu/drm/drm_modes.c > +++ b/drivers/gpu/drm/drm_modes.c > @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); > * according to the hdisplay, vdisplay, vrefresh. > * It is based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls > * > * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt= .c. > * What I have done is to translate it by using integer calculation. > /* > * Keymap for ATCom AU-100 > - * http://www.atcom.cn/En_products_AU100.html > + * http://www.atcom.cn/products.html=20 > * http://www.packetizer.com/products/au100/ > * http://www.voip-info.org/wiki/view/AU-100 > * > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig > index c714ca2..5e98430 100644 > --- a/drivers/input/mouse/Kconfig > +++ b/drivers/input/mouse/Kconfig > @@ -27,10 +27,7 @@ config MOUSE_PS2 > =20 > Synaptics, ALPS or Elantech TouchPad users might be interested > in a specialized Xorg/XFree86 driver at: > - > - and a new version of GPM at: > - This one is in the web archive so it might be a good idea to keep the URL? > - to take advantage of the advanced features of the touchpad. > + > =20 > If unsure, say Y. > =20 > diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/vi= deo/cx23885/cx23885-417.c > index abd64e8..43eea3a 100644 > --- a/drivers/media/video/cx23885/cx23885-417.c > +++ b/drivers/media/video/cx23885/cx23885-417.c > @@ -7,7 +7,7 @@ > * (c) 2008 Steven Toth > * - CX23885/7/8 support > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver(http://sourceforge.net/projects/= ivtv/), How about, + * Includes parts from the ivtv driver > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/vi= deo/cx88/cx88-blackbird.c > index e46e1ce..821766e 100644 > --- a/drivers/media/video/cx88/cx88-blackbird.c > +++ b/drivers/media/video/cx88/cx88-blackbird.c > @@ -9,7 +9,7 @@ > * (c) 2005-2006 Mauro Carvalho Chehab > * - video_ioctl2 conversion > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver(http://sourceforge.net/projects/= ivtv/), Same here. > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c > index 4d6a64c..8e201b8 100644 > --- a/drivers/mtd/ftl.c > +++ b/drivers/mtd/ftl.c > @@ -51,7 +51,7 @@ > =20 > Use of the FTL format for non-PCMCIA applications may be an > infringement of these patents. For additional information, > - contact M-Systems (http://www.m-sys.com) directly. > + contact M-Systems directly. [M-Systems since acquired by Sandisk.]. An entire sentence within parentheses is usually written like this: + contact M-Systems directly. [M-Systems since acquired by Sandisk.] > =20 > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D*/ > #include > diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c > index db1dfc5..48894dc 100644 > --- a/drivers/mtd/nand/cafe_nand.c > +++ b/drivers/mtd/nand/cafe_nand.c > @@ -2,7 +2,7 @@ > * Driver for One Laptop Per Child ?CAF?? controller, aka Marvell 88ALP01 > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://www.marvell.com/products/pc_connectivity/88alp01/=20 No, it isn't there any longer. It is here though: http://wiki.laptop.org/go/Datasheets > * > * Copyright ? 2006 Red Hat, Inc. > * Copyright ? 2006 David Woodhouse > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 2cc81a5..99fb1f6 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -1541,7 +1541,7 @@ config FEALNX > help > Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet > cards. Specifications and data at > - . > + . Links to the datasheetarchive are probably redundant. We have search=20 engines for that. Also, there are three devices supported by this driver=20 and your link is only good for one of them, so searching is likely to be=20 needed anyway. The site is actually http://www.myson.com.tw/ but there's no product=20 information there any longer. I'd suggest this (also correcting the typo): - Say Y here to support the Mysom MTD-800 family of PCI-based Ethern= et - cards. Specifications and data at - . + Say Y here to support the Myson MTD-800 family of PCI-based Ethern= et + cards. > =20 > config NATSEMI > tristate "National Semiconductor DP8381x series PCI Ethernet support" > http://www.national.com/pf/DP/DP83840A.html > =20 > index c683f77..230158b 100644 > --- a/drivers/net/pcmcia/3c574_cs.c > +++ b/drivers/net/pcmcia/3c574_cs.c > @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. > V. References > =20 > http://www.scyld.com/expert/NWay.html > -http://www.national.com/pf/DP/DP83840.html > +http://www.national.com/opf/DP/DP83840A.html#Overview No need for the "#Overview" anchor. > =20 > Thanks to Terry Murphy of 3Com for providing development information for > earlier 3Com products. > diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h > index 150511a..45f5323 100644 > --- a/drivers/net/sis900.h > +++ b/drivers/net/sis900.h > @@ -7,7 +7,7 @@ > * preliminary Rev. 1.0 Nov. 10, 1998 > * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, > * preliminary Rev. 1.0 Jan. 18, 1998 > - * http://www.sis.com.tw/support/databook.htm > + * http://www.sis.com/elibrary/elibrary_index00.htm=20 The old URL is in the web archive, complete with the relevant datasheets. But if I follow your URL, I get nothing useful. > */ > =20 > /* > index b0342a5..024fccc 100644 > --- a/drivers/net/wireless/p54/Kconfig > +++ b/drivers/net/wireless/p54/Kconfig > @@ -8,7 +8,7 @@ config P54_COMMON > also need to be enabled in order to support any devices. > =20 > These devices require softmac firmware which can be found at > - http://prism54.org/ > + http://wireless.kernel.org/en/users/Drivers/p54=20 The convention seems to be angle brackets around URLS in Kconfig. > =20 > If you choose to build a module, it'll be called p54common. > =20 > @@ -20,7 +20,7 @@ config P54_USB > This driver is for USB isl38xx based wireless cards. > =20 > These devices require softmac firmware which can be found at > - http://prism54.org/ > + http://wireless.kernel.org/en/users/Drivers/p54=20 Same. > =20 > If you choose to build a module, it'll be called p54usb. > =20 > @@ -34,7 +34,7 @@ config P54_PCI > supported by the fullmac driver/firmware. > =20 > This driver requires softmac firmware which can be found at > - http://prism54.org/ > + http://wireless.kernel.org/en/users/Drivers/p54 > =20 > If you choose to build a module, it'll be called p54pci. > =20 Same. > @@ -205,7 +205,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEV= ICE_ID_INTEL_82439TX, quir > /* > * VIA Apollo KT133 needs PCI latency patch > * Made according to a windows driver based patch by George E. Breese > - * see PCI Latency Adjust on http://www.viahardware.com/download/viatwea= k.shtm > + * see PCI Latency Adjust on http://www.georgebreese.com/net/software/#P= CI=20 The old link is in the web archive, but yours is also useful. Can't we have both? > * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for > * the info on which Mr Breese based his work. > * > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -949,7 +949,7 @@ config SCSI_IPS > depends on PCI && SCSI > ---help--- > This is support for the IBM ServeRAID hardware RAID controllers. > - See > + See The old URL is in the web archive, complete with downloads. Please keep it around as there may be no other way to find that material. > for more information. If this driver does not work correctly > without modification please contact the author by email at > . > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c > index b02bdc6..705f541 100644 > --- a/drivers/scsi/scsi_debug.c > +++ b/drivers/scsi/scsi_debug.c > @@ -555,8 +555,8 @@ static int inquiry_evpd_84(unsigned char * arr) > static int inquiry_evpd_85(unsigned char * arr) > { > int num =3D 0; > - const char * na1 =3D "https://www.kernel.org/config"; > - const char * na2 =3D "http://www.kernel.org/log"; > + const char * na1 =3D "https://www.kernel.org"; > + const char * na2 =3D "http://www.kernel.org"; Why? These are deliberately fake, and deliberately different. BTW, a URL like http://www.kernel.org/ is supposed to have the slash at=20 the end. > int plen, olen; > =20 > arr[num++] =3D 0x1; /* lu, storage config */ > diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c > index 24110f6..41a3ed8 100644 > --- a/drivers/serial/8250.c > +++ b/drivers/serial/8250.c > @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up) > /* > * Exar ST16C2550 "A2" devices incorrectly detect as > * having an EFR, and report an ID of 0x0201. See > - * http://www.exar.com/info.php?pdf=DAn180_oct2004.pdf > + * http://linux.derkeiler.com/pdf/Mailing-Lists/Kernel/2004-11/4812.pdf= =20 This link is better since it has the entire thread: http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html > */ > if (autoconfig_read_divisor_id(up) =3D 0x0201 && size_fifo(up) =3D 16) > return 1; > diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled= /README > index 96b9717..b6f77c5 100644 > --- a/drivers/staging/asus_oled/README > +++ b/drivers/staging/asus_oled/README > @@ -2,7 +2,7 @@ > Driver for Asus OLED display present in some Asus laptops. > =20 > The code of this driver is based on 'asusoled' program taken from > - https://launchpad.net/asusoled/. I just wanted to have a simple > + http://lapsus.berlios.de/asus_oled.html. I just wanted to have a sim= ple The trailing "." isn't helping. Put it inside angle brackets. > kernel driver for controlling this device, but I didn't know how > to do that. Now I know ;) Also, that program can not be used > with usbhid loaded, which means no USB mouse/keyboard while > diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus= _oled/asus_oled.c > index 5b279fb..1cb2116 100644 > --- a/drivers/staging/asus_oled/asus_oled.c > +++ b/drivers/staging/asus_oled/asus_oled.c > @@ -24,7 +24,7 @@ > * > * > * Asus OLED support is based on asusoled program taken from > - * https://launchpad.net/asusoled/. > + * http://lapsus.berlios.de/asus_oled.html. Same here. > * > * > */ > diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/stagin= g/comedi/drivers/cb_pcimdas.c > index ced346a..e4cf861 100644 > --- a/drivers/staging/comedi/drivers/cb_pcimdas.c > +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c > @@ -37,7 +37,7 @@ Configuration Options: > Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org). > Only supports DIO, AO and simple AI in it's present form. > No interrupts, multi channel or FIFO AI, although the card looks like it= could support this. > -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf f= or more details. > +See http://www.mccdaq.com/specs.aspx for more details. This loses information. Your patch removes the filename. For example,=20 Googling that filename gives this: http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf > */ > =20 > #include "../comedidev.h" > diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/stag= ing/comedi/drivers/daqboard2000.c > index 6af6c83..ba5a980 100644 > --- a/drivers/staging/comedi/drivers/daqboard2000.c > +++ b/drivers/staging/comedi/drivers/daqboard2000.c > @@ -51,7 +51,7 @@ Configuration options: > for the card, and here are the findings so far. > =20 > 1. A good document that describes the PCI interface chip is found at: > - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf > + http://www.plxtech.com/products/io/pci9080=20 Again, googling "9080db-106.pdf" locates the pdf, but it isn't available=20 without registration using the link you provided. I suggest that you at=20 least keep the filename (see above). > =20 > 2. The initialization done so far is: > a. program the FPGA (windows code sans a lot of error messages) > diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/sta= ging/comedi/drivers/ni_mio_common.c > index bd16f91..a2691db 100644 > --- a/drivers/staging/comedi/drivers/ni_mio_common.c > +++ b/drivers/staging/comedi/drivers/ni_mio_common.c > @@ -34,7 +34,7 @@ > 340747b.pdf AT-MIO E series Register Level Programmer Manual > 341079b.pdf PCI E Series RLPM > 340934b.pdf DAQ-STC reference manual > - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) > + 67xx and 611x registers (from http://www.ni.com/pdf/manuals/340934b.pdf) > release_ni611x.pdf > release_ni67xx.pdf This is wrong. The URL you provided doesn't offer release_ni611x.pdf or=20 release_ni67xx.pdf. Those two documents are here:=20 ftp://ftp.ni.com/support/daq/mhddk/documentation/ > Other possibly relevant info: > diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/c= omedi/drivers/plx9080.h > index 485d63f..6c14b6b 100644 > --- a/drivers/staging/comedi/drivers/plx9080.h > +++ b/drivers/staging/comedi/drivers/plx9080.h > @@ -13,7 +13,7 @@ > * > ******************************************************************** > * > - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ > + * Copyright (C) 1999 RG Studio s.c.,=20 You could lose the trailing comma. > * Written by Krzysztof Halasa > * > * Portions (C) SBE Inc., used by permission. > diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/qu= ickstart/quickstart.c > index 6612247..31b0a13 100644 > --- a/drivers/staging/quickstart/quickstart.c > +++ b/drivers/staging/quickstart/quickstart.c > @@ -5,8 +5,7 @@ > * Copyright (C) 2007-2010 Angelo Arrifano > * > * Information gathered from disassebled dsdt and from here: > - * "http://download.microsoft.com/download/9/c/5/ > - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" > + * "http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch= .mspx" Angle brackets would be better than quote marks. > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig > index b5f78b6..fda68f7 100644 > --- a/drivers/telephony/Kconfig > +++ b/drivers/telephony/Kconfig > @@ -31,7 +31,7 @@ config PHONE_IXJ > isapnp support. Please read . > =20 > For more information on these cards, see Quicknet's web site at: > - . > + . No, Quicknet Technologies (www.quicknet.net in the web archive) is not the = same as Quicknet, Inc. The URL is in the web archive. > =20 > If you do not have any Quicknet telephony cards, you can safely > say N here. > diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c > index b53deee..872ee40 100644 > --- a/drivers/telephony/ixj.c > +++ b/drivers/telephony/ixj.c > @@ -26,7 +26,7 @@ > * Daniele Bellucci, > * > * More information about the hardware related to this driver can be fou= nd =20 > - * at our website: http://www.quicknet.net > + * at our website: http://www.qn.net/=20 Same. > * > * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY = FOR > * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISI= NG OUT > diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h > index 4c32a43..c012193 100644 > --- a/drivers/telephony/ixj.h > +++ b/drivers/telephony/ixj.h > @@ -22,7 +22,7 @@ > * Mike Preston, > * > * More information about the hardware related to this driver can be fou= nd > - * at our website: http://www.quicknet.net > + * at our website: http://www.qn.net/=20 Same. > * > * Fixes: > * > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig > index 1da73ec..8d3ba1d 100644 > --- a/drivers/uio/Kconfig > +++ b/drivers/uio/Kconfig > @@ -19,7 +19,7 @@ config UIO_CIF > Driver for Hilscher CIF DeviceNet and Profibus cards. This > driver requires a userspace component that handles all of the > heavy lifting and can be found at: > - http://www.osadl.org/projects/downloads/UIO/user/cif-* > + http://www.osadl.org/projects/downloads/UIO/user/=09 The old link is correct. But it can be improved. For example -- - driver requires a userspace component that handles all of the - heavy lifting and can be found at: - http://www.osadl.org/projects/downloads/UIO/user/cif-* + driver requires a userspace component called cif that handles + all of the heavy lifting and can be found at: + http://www.osadl.org/projects/downloads/UIO/user/=09 > =20 > To compile this driver as a module, choose M here: the module > will be called uio_cif. > diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig > index 916b2b6..fc20f80 100644 > --- a/drivers/usb/serial/Kconfig > +++ b/drivers/usb/serial/Kconfig > @@ -264,7 +264,7 @@ config USB_SERIAL_IUU > help > Say Y here if you want to use a IUU in phoenix mode and get > an extra ttyUSBx device. More information available on > - http://eczema.ecze.com/iuu_phoenix.html > + http://www.opensc-project.org/openct/wiki/wbeiuu=20 The old URL is in the web archive. You don't have to use this IUU driver=20 with OpenSC... > =20 > To compile this driver as a module, choose M here: the > module will be called iuu_phoenix.o > @@ -289,7 +289,8 @@ config USB_SERIAL_KEYSPAN > and was developed with their support. You must also include > firmware to support your particular device(s). > =20 > - See for more information. > + See I dunno what Carnation Software has to do with it. Hugh's page moved here: http://blemings.org/hugh/keyspan.html > + for more information. > =20 > To compile this driver as a module, choose M here: the > module will be called keyspan. > diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_= sio_ids.h > index 15a4583..2438ae0 100644 > --- a/drivers/usb/serial/ftdi_sio_ids.h > +++ b/drivers/usb/serial/ftdi_sio_ids.h > @@ -335,7 +335,7 @@ > #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ > =20 > /* ACT Solutions HomePro ZWave interface > - (http://www.act-solutions.com/HomePro.htm) */ > + (http://www.act-solutions.com/index.php) */ A better link is, http://www.act-solutions.com/HomePro-Product-Matrix.html > #define FTDI_ACTZWAVE_PID 0xF2D0 > =20 > /* > @@ -434,7 +434,7 @@ > =20 > /* > * PCDJ use ftdi based dj-controllers. The following PID is > - * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp > + * for their DAC-2 device http://pcdj.com/index.php/support/dex_dac_2/=20 That's not the same page. The old one is in the web archive, so no patch=20 needed. > * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paes= en) > */ > #define FTDI_PCDJ_DAC2_PID 0xFA88 > @@ -723,7 +723,7 @@ > =20 > /* > * Bayer Ascensia Contour blood glucose meter USB-converter cable. > - * http://winglucofacts.com/cables/ > + * http://www.simplewins.com/Default.aspx=20 The old link is valid. Your URL has this: http://www.simplewins.com/site/Adults/Monitor/Pages/Bayer-Products/Contour-= USB but who's to say whether it has the same PID/VID? I don't know... > */ > #define BAYER_VID 0x1A79 > #define BAYER_CONTOUR_CABLE_PID 0x6001 > diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c > index 297163c..9240914 100644 > --- a/drivers/usb/serial/keyspan.c > +++ b/drivers/usb/serial/keyspan.c > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > =20 > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://www.carnationsoftware.com/carnation/Keyspan.html for more i= nformation. As above, http://blemings.org/hugh/keyspan.html > =20 > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h > index bf3297d..f8b6a41 100644 > --- a/drivers/usb/serial/keyspan.h > +++ b/drivers/usb/serial/keyspan.h > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > =20 > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://www.carnationsoftware.com/carnation/Keyspan.html for more i= nformation. http://blemings.org/hugh/keyspan.html > =20 > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h > index 3a3f5e6..6f773c4 100644 > --- a/drivers/usb/serial/mct_u232.h > +++ b/drivers/usb/serial/mct_u232.h > @@ -10,10 +10,10 @@ > * > * This driver is for the device MCT USB-RS232 Converter (25 pin, Model = No. > * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin > - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further > - * information. The properties of this device are listed at the end of t= his > - * file. This device is available from various distributors. I know Hana, > - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs= 25. > + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.= html=20 > + * for further information. The properties of this device are listed at = the end=20 > + * of this file. This device is available from various distributors.=20 > + * D-Link, http://www.dlink.com/products/usb/dsbs25. The trailing "." should go. How about this -- + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.ht= ml=20 + * for further information. The properties of this device are listed at th= e end=20 + * of this file. This device was used in the Dlink DSB-S25. > * > * All of the information about the device was acquired by using SniffUSB > * on Windows98. The technical details of the reverse engineering are > diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig > index 8a372ba..b356e15 100644 > --- a/drivers/usb/storage/Kconfig > +++ b/drivers/usb/storage/Kconfig > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 8b31fdf..a07fc57 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -1323,7 +1323,7 @@ config FB_RADEON > don't need to choose this to run the Radeon in plain VGA mode. > =20 > There is a product page at > - http://apps.ati.com/ATIcompare/ > + http://www.amd.com/us/products/technologies/ati-catalyst/Pages/cataly= st.aspx=20 There's no hardware product information at the URL you gave. It is a=20 brouchure for AMD's Catalyst software. Here is the URL for the product=20 specs: http://products.amd.com/en-us/GraphicCardResult.aspx > =20 > config FB_RADEON_I2C > bool "DDC/I2C for ATI Radeon support" > @@ -1395,7 +1395,7 @@ config FB_ATY_CT > Say Y here to support use of ATI's 64-bit Rage boards (or other > boards based on the Mach64 CT, VT, GT, and LT chipsets) as a > framebuffer device. The ATI product support page for these boards > - is at . > + is at . Why? Catalyst is not related to Mach64. Here's the URL you want: http://support.ati.com/products/pc/mach64/mach64.html You won't find any info at amd.com but at least it works in the web archive, which is a huge improvement. > =20 > config FB_ATY_GENERIC_LCD > bool "Mach64 generic LCD support (EXPERIMENTAL)" > diff --git a/fs/nls/nls_euc-jp.c b/fs/nls/nls_euc-jp.c > index 7424929..d7d5526 100644 > --- a/fs/nls/nls_euc-jp.c > +++ b/fs/nls/nls_euc-jp.c > @@ -3,7 +3,7 @@ > * > * Added `OSF/JVC Recommended Code Set Conversion Specification > * between Japanese EUC and Shift-JIS' support: > - * (http://www.opengroup.or.jp/jvc/cde/sjis-euc-e.html) > + * (http://www.opengroup.or.jp/) The document is in the web archive, and not at your URL, so this is=20 damage. > */ > =20 > #include > diff --git a/include/crypto/b128ops.h b/include/crypto/b128ops.h > index 0b8e6bc..499741c 100644 > --- a/include/crypto/b128ops.h > +++ b/include/crypto/b128ops.h > @@ -4,7 +4,7 @@ > * Copyright (c) 2006, Rik Snel > * > * Based on Dr Brian Gladman's (GPL'd) work published at > - * http://fp.gladman.plus.com/cryptography_technology/index.htm > + * http://www.gladman.me.uk/=20 Well, it doesn't say "Based on Dr Brian Gladman's latest work". The=20 original is in the web archive so no patch is needed I think... > * See the original copyright notice below. > * > * This program is free software; you can redistribute it and/or modify = it > diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h > index 4086b8e..7021c6c 100644 > --- a/include/crypto/gf128mul.h > +++ b/include/crypto/gf128mul.h > @@ -4,7 +4,7 @@ > * Copyright (c) 2006 Rik Snel > * > * Based on Dr Brian Gladman's (GPL'd) work published at > - * http://fp.gladman.plus.com/cryptography_technology/index.htm > + * http://www.gladman.me.uk/=20 Same here. > * See the original copyright notice below. > * > * This program is free software; you can redistribute it and/or modify = it > @@ -54,8 +54,8 @@ > =20 > /* Comment by Rik: > * > - * For some background on GF(2^128) see for example: http://- > - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.= pdf > + * For some background on GF(2^128) see for example:=20 > + * http://www.cryptobarn.com/papers/gcm-spec.pdf=20 This is the correct URL: http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-= revised-spec.pdf > * > * The elements of GF(2^128) :=3D GF(2)[X]/(X^128-X^7-X^2-X^1-1) can > * be mapped to computer memory in a variety of ways. Let's examine > diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h > index 88b4589..594d871 100644 > --- a/include/linux/ixjuser.h > +++ b/include/linux/ixjuser.h > @@ -25,7 +25,7 @@ > * Mike Preston, > * > * More information about the hardware related to this driver can be fou= nd > - * at our website: http://www.quicknet.net > + * at our website: http://www.qn.net/=20 See above. > * > * Fixes: > * > diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h > index de24af7..60d73a6 100644 > --- a/include/linux/n_r3964.h > +++ b/include/linux/n_r3964.h > @@ -4,7 +4,7 @@ > * Copyright by > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > + * http://www.pronto.philips.com/index.cfm?id=1292=20 This URL you have provided is certainly pap but otherwise it doesn't=20 relate. The URL you removed looks like advertising for a division that=20 doesn't exist any longer, apparently spun off as KH-Automaton Projects=20 GmbH. I'd remove it too. > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig > index 571f895..a90050d 100644 > --- a/net/ipv4/Kconfig > +++ b/net/ipv4/Kconfig > @@ -84,7 +84,7 @@ config IP_FIB_TRIE > =20 > An experimental study of compression methods for dynamic tries > Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > + http://www.csc.kth.se/~snilsson/software/dyntrie2/=20 > =20 > endchoice > =20 > @@ -555,7 +555,7 @@ config TCP_CONG_VENO > distinguishing to circumvent the difficult judgment of the packet loss > type. TCP Veno cuts down less congestion window in response to random > loss packets. > - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > + See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.p= df=20 You wouldn't guess from looking at either of these links, but the citation is actually this paper: C.P. Fu and S.C. Liew. "TCP Veno: TCP Enhancement for Transmission Over wireless Access Networks," IEEE Journal on Selected Areas in Communication, February 2003. > =20 > config TCP_CONG_YEAH > tristate "YeAH TCP" > diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig > index 1833bdb..d6a784c 100644 > --- a/net/ipv4/netfilter/Kconfig > +++ b/net/ipv4/netfilter/Kconfig > @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG > which can only be viewed through syslog. > =20 > The appropriate userspace logging daemon (ulogd) may be obtained from > - > + Well I tried to obtain ulogd there but I couldn't find it. It is available here though: http://www.netfilter.org/projects/ulogd/index.html > =20 > To compile it as a module, choose M here. If unsure, say N. > =20 > diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c > index 20151d6..bbf0e99 100644 > --- a/net/ipv4/tcp_westwood.c > +++ b/net/ipv4/tcp_westwood.c > @@ -3,7 +3,7 @@ > * > * Angelo Dell'Aera: author of the first version of TCP Westwood+ i= n Linux 2.4 > * > - * Support at http://c3lab.poliba.it/index.php/Westwood > + * Support at http://www.cs.ucla.edu/NRL/hpi/tcpw/=20 I wouldn't think that you'd get support there. It claims to be the=20 homepage for a BSD based implementation of TCP Westwood. In anycase,=20 google cached the poliba.it link on 19 Sep 2010, so I don't think this=20 needs to be patched. Besides, it is also in the web archive. > * Main references in literature: > * > * - Mascolo S, Casetti, M. Gerla et al. > =20 > The boundaries and the conditions are changed according to RFC793: > the packet must intersect the window (i.e. segments may be > diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c > index 456a1b4..e2c5fe9 100644 > --- a/sound/oss/ac97_codec.c > +++ b/sound/oss/ac97_codec.c > @@ -22,10 +22,7 @@ > ***********************************************************************= *** > * > * The Intel Audio Codec '97 specification is available at the Intel "is available at:" > - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audi= o/ > - * > - * The specification itself is currently available at: > - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf > + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf > * > ***********************************************************************= *** > * > diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c > index c7fba53..deffcc8 100644 > --- a/sound/pci/ens1370.c > +++ b/sound/pci/ens1370.c > @@ -22,7 +22,7 @@ > /* Power-Management-Code ( CONFIG_PM ) > * for ens1371 only ( FIXME ) > * derived from cs4281.c, atiixp.c and via82xx.c > - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.= htm > + * using http://www.kernel.org/pub/linux/kernel/people/tiwai/docs/writin= g-an-alsa-driver/index.html=20 I think this is a better choice: http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ > * by Kurt J. Bosch > */ > =20 Thanks. Finn