Re: [PATCH] backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction()

[Daniel Thompson <daniel.thompson@linaro.org>]

On 22/03/17 17:21, Geert Uytterhoeven wrote:
> Commit 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial
> power state to a separate function") not just moved some code, but made
> slight changes in semantics.
>
> If a gpiochip doesn't implement the optional .get_direction() callback,
> gpiod_get_direction always returns -EINVAL, which is never equal to
> GPIOF_DIR_IN, leading to the GPIO not being configured for output.
>
> To avoid this, invert the test and check for not GPIOF_DIR_OUT instead,
> like the original code did.
>
> This restores the display on r8a7740/armadillo.
>
> Fixes: 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial power state to a separate function")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Acked-by: Daniel Thommpson <daniel.thompson@linaro.org>


> ---
>  drivers/video/backlight/pwm_bl.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index d7efcb632f7d9dde..002f1ce22bd02032 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -297,14 +297,15 @@ static int pwm_backlight_probe(struct platform_device *pdev)
>  	}
>
>  	/*
> -	 * If the GPIO is configured as input, change the direction to output
> -	 * and set the GPIO as active.
> +	 * If the GPIO is not known to be already configured as output, that
> +	 * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL,
> +	 * change the direction to output and set the GPIO as active.
>  	 * Do not force the GPIO to active when it was already output as it
>  	 * could cause backlight flickering or we would enable the backlight too
>  	 * early. Leave the decision of the initial backlight state for later.
>  	 */
>  	if (pb->enable_gpio &&
> -	    gpiod_get_direction(pb->enable_gpio) = GPIOF_DIR_IN)
> +	    gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT)
>  		gpiod_direction_output(pb->enable_gpio, 1);
>
>  	pb->power_supply = devm_regulator_get(&pdev->dev, "power");
>