From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Giuseppe Bilotta" Subject: Re: [Linux-fbdev-devel] [PATCH] nvidiafb: allow ignoring EDID info Date: Thu, 22 Feb 2007 16:55:56 +0100 Message-ID: References: <20070130203301.GA15067@dreamland.darkstar.lan> <20070204201713.GA12867@dreamland.darkstar.lan> <1172101406.4217.16.camel@daplas> <1172133646.4086.5.camel@daplas> <1172153358.4306.17.camel@daplas> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1172153358.4306.17.camel@daplas> Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org List-Id: Cc: James Simmons , Luca Tettamanti , linux-fbdev-devel@lists.sourceforge.net, Andrew Morton , Dave Airlie , linux-kernel@vger.kernel.org On 2/22/07, Antonino A. Daplas wrote: > > Ah, my fault. Apply this patch on top. We're getting closer! The patch now works, and the dmesg has the following info: ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 nvidiafb: Device ID: 10de0112 fbmon: The EDID Block of Manufacturer: SHP Model: 0x138e is known to be broken, fbmon: trying to fix monitor timings nvidiafb: EDID found from BUS2 ======================================== Display Information (EDID) ======================================== EDID Version 1.3 Manufacturer: SHP Model: 138e Serial#: 0 Year: 1990 Week 0 Display Characteristics: Monitor Operating Limits: From EDID H: 30-75KHz V: 60-60Hz DCLK: 170MHz Digital Display Input Sync: Max H-size in cm: 30 Max V-size in cm: 23 Gamma: 2.20 DPMS: Active no, Suspend yes, Standby yes RGB Color Display Chroma RedX: 0.599 RedY: 0.335 GreenX: 0.313 GreenY: 0.552 BlueX: 0.150 BlueY: 0.145 WhiteX: 0.313 WhiteY: 0.328 First DETAILED Timing is preferred Detailed Timings 160 MHz 1600 1664 1856 2112 1200 1201 1204 1250 -HSync -VSync Supported VESA Modes Manufacturer's mask: 0 Standard Timings 1600x1200@60Hz ======================================== nvidiafb: CRTC 1 is currently programmed for DFP nvidiafb: Using DFP on CRTC 1 nvidiafb: Panel size is 1600 x 1200 nvidiafb: Panel is TMDS nvidiafb: MTRR set to ON nvidiafb: Flat panel dithering disabled Console: switching to colour frame buffer device 200x75 nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0xE0000000) However, I'm still getting the same snowy effects, which doesn't come as a surprise since the actual mode timings used are just the same ... -- Giuseppe "Oblomov" Bilotta