[PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

[PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

[Hans de Goede]

Hi All,

Here is v6 of my series to add a "panel orientation" property to
the drm-connector for the LCD panel to let userspace know about LCD
panels which are not mounted upright, as well as detecting upside-down
panels without needing quirks (like we do for 90 degree rotated screens).

Bartlomiej, can we please have your Acked-by for merging patches 1,
6 and 7 through the drm tree?

New in v6:
-Fix / reference kernel-doc comments
-Don't export the DRM_MODE_PANEL_ORIENTATION_* defines in the UAPI
-Move i915 dsi hardware rotation state read-out to intel_dsi_init()

New in v5:
-Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
-drm_fb_helper: Only use hardware (crtc primary plane) rotation for
 180 degrees for now as 9-/270 degrees rotation requires special handling

New in v4:
-Fix drm_fb_helper code setting an invalid rotation value on the primary
 plane of disabled/unused crtcs (caught by Fi.CI)

New in v3:
-As requested by Daniel v3 moves the quirks over from the fbdev
 subsys to the drm subsys. I've done this by simpy starting with a copy of
 the quirk table and eventually removing the fbdev version.

The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
discussed previously the plan is to merge all 7 patches through the
drm tree.

Regards,

Hans

[PATCH v6 1/7] fbcon: Add fbcon_rotate_hint to struct fb_info

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but upside-down or rotated 90 degrees. In this case we want the console
to automatically be rotated to compensate.

The fbdev-driver may know about the need to rotate. Add a new
fbcon_rotate_hint field to struct fb_info, which gets initialized to -1.
If the fbdev-driver knows that some sort of rotation is necessary then
it can set this field to a FB_ROTATE_* value to tell the fbcon console
driver to rotate the console.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/fbcon.c   | 18 ++++++++++++------
 drivers/video/fbdev/core/fbsysfs.c |  1 +
 include/linux/fb.h                 |  5 +++++
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 929ca472c524..30014e5867db 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -964,10 +964,13 @@ static const char *fbcon_startup(void)
 	ops->cur_blink_jiffies = HZ / 5;
 	ops->info = info;
 	info->fbcon_par = ops;
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate = -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate = -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	if (info->fix.type != FB_TYPE_TEXT) {
@@ -1104,10 +1107,13 @@ static void fbcon_init(struct vc_data *vc, int init)
 
 	ops = info->fbcon_par;
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate = -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate = -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	cols = vc->vc_cols;
diff --git a/drivers/video/fbdev/core/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 15755ce1d26c..e31a182b42bf 100644
--- a/drivers/video/fbdev/core/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
@@ -58,6 +58,7 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
 		info->par = p + fb_info_size;
 
 	info->device = dev;
+	info->fbcon_rotate_hint = -1;
 
 #ifdef CONFIG_FB_BACKLIGHT
 	mutex_init(&info->bl_curve_mutex);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index bc24e48e396d..d1e5bed39140 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -465,6 +465,11 @@ struct fb_info {
 	atomic_t count;
 	int node;
 	int flags;
+	/*
+	 * -1 by default, set to a FB_ROTATE_* value by the driver, if it knows
+	 * a lcd is not mounted upright and fbcon should rotate to compensate.
+	 */
+	int fbcon_rotate_hint;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
 	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
 	struct fb_var_screeninfo var;	/* Current var */
-- 
2.14.3

[PATCH v6 2/7] drm: Add panel orientation quirks, v6.

[Hans de Goede]

Some x86 clamshell design devices use portrait tablet screens and a display
engine which cannot rotate in hardware, so the firmware just leaves things
as is and we cannot figure out that the display is oriented non upright
from the hardware.

So at least on x86, we need a quirk table for this. This commit adds a DMI
based quirk table which is initially populated with 5 such devices: Asus
T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.

This quirk table will be used by the drm code to let userspace know that
the display is not mounted upright inside the devices case through a new
panel orientation drm-connector property, as well as to tell fbcon to
rotate the console so that it shows the right way up.

Changes in v5:
-Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()
-Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
 keeping only the (identical) sys_vendor and product_name matches.
 This is necessary because an older version of the bios has
 board_vendor set to VOIS instead of VIOS

Changes in v6:
-Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 Documentation/gpu/drm-kms-helpers.rst          |   3 +
 drivers/gpu/drm/Kconfig                        |   3 +
 drivers/gpu/drm/Makefile                       |   1 +
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 174 +++++++++++++++++++++++++
 include/drm/drm_utils.h                        |  18 +++
 5 files changed, 199 insertions(+)
 create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
 create mode 100644 include/drm/drm_utils.h

diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
index 13dd237418cc..3ea622876b67 100644
--- a/Documentation/gpu/drm-kms-helpers.rst
+++ b/Documentation/gpu/drm-kms-helpers.rst
@@ -163,6 +163,9 @@ Panel Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_panel.c
    :export:
 
+.. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
+   :export:
+
 Display Port Helper Functions Reference
 =================== 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4d9f21831741..9d005ac98c2b 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -26,6 +26,9 @@ config DRM_MIPI_DSI
 	bool
 	depends on DRM
 
+config DRM_PANEL_ORIENTATION_QUIRKS
+	tristate
+
 config DRM_DP_AUX_CHARDEV
 	bool "DRM DP AUX Interface"
 	depends on DRM
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index e9500844333e..e5bf68b9c171 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
 
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
+obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
 obj-$(CONFIG_DRM_ARM)	+= arm/
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
new file mode 100644
index 000000000000..b8765e2ed1d6
--- /dev/null
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -0,0 +1,174 @@
+/*
+ *  drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
+ *
+ *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#include <linux/dmi.h>
+#include <drm/drm_connector.h>
+
+#ifdef CONFIG_DMI
+
+/*
+ * Some x86 clamshell design devices use portrait tablet screens and a display
+ * engine which cannot rotate in hardware, so we need to rotate the fbcon to
+ * compensate. Unfortunately these (cheap) devices also typically have quite
+ * generic DMI data, so we match on a combination of DMI data, screen resolution
+ * and a list of known BIOS dates to avoid false positives.
+ */
+
+struct drm_dmi_panel_orientation_data {
+	int width;
+	int height;
+	const char * const *bios_dates;
+	int orientation;
+};
+
+static const struct drm_dmi_panel_orientation_data asus_t100ha = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_pocket = {
+	.width = 1200,
+	.height = 1920,
+	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
+		"07/05/2017", "08/07/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_win = {
+	.width = 720,
+	.height = 1280,
+	.bios_dates = (const char * const []){
+		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
+		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
+	.width = 800,
+	.height = 1280,
+	.bios_dates = (const char * const []){ "10/16/2015", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data vios_lth17 = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct dmi_system_id orientation_data[] = {
+	{	/* Asus T100HA */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
+		},
+		.driver_data = (void *)&asus_t100ha,
+	}, {	/*
+		 * GPD Pocket, note that the the DMI data is less generic then
+		 * it seems, devices with a board-vendor of "AMI Corporation"
+		 * are quite rare, as are devices which have both board- *and*
+		 * product-id set to "Default String"
+		 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_pocket,
+	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_win,
+	}, {	/* I.T.Works TW891 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
+		},
+		.driver_data = (void *)&itworks_tw891,
+	}, {	/* VIOS LTH17 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
+		},
+		.driver_data = (void *)&vios_lth17,
+	},
+	{}
+};
+
+/**
+ * drm_get_panel_orientation_quirk - Check for panel orientation quirks
+ * @width: width in pixels of the panel
+ * @height: height in pixels of the panel
+ *
+ * This function checks for platform specific (e.g. DMI based) quirks
+ * providing info on panel_orientation for systems where this cannot be
+ * probed from the hard-/firm-ware. To avoid false-positive this function
+ * takes the panel resolution as argument and checks that against the
+ * resolution expected by the quirk-table entry.
+ *
+ * Note this function is also used outside of the drm-subsys, by for example
+ * the efifb code. Because of this this function gets compiled into its own
+ * kernel-module when built as a module.
+ *
+ * Returns:
+ * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
+ * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
+ */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	const struct dmi_system_id *match;
+	const struct drm_dmi_panel_orientation_data *data;
+	const char *bios_date;
+	int i;
+
+	for (match = dmi_first_match(orientation_data);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		data = match->driver_data;
+
+		if (data->width != width ||
+		    data->height != height)
+			continue;
+
+		if (!data->bios_dates)
+			return data->orientation;
+
+		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
+		if (!bios_date)
+			continue;
+
+		for (i = 0; data->bios_dates[i]; i++) {
+			if (!strcmp(data->bios_dates[i], bios_date))
+				return data->orientation;
+		}
+	}
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#else
+
+/* There are no quirks for non x86 devices yet */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#endif
diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
new file mode 100644
index 000000000000..cea362aeaffe
--- /dev/null
+++ b/include/drm/drm_utils.h
@@ -0,0 +1,18 @@
+/*
+ * Function prototypes for misc. drm utility functions.
+ * Specifically this file is for function prototypes for functions which
+ * may also be used outside of drm code (e.g. in fbdev drivers).
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRM_UTILS_H__
+#define __DRM_UTILS_H__
+
+int drm_get_panel_orientation_quirk(int width, int height);
+
+#endif
-- 
2.14.3

[PATCH v6 3/7] drm: Add support for a panel-orientation connector property, v6

[Hans de Goede]

On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).

This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.

Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.

Changes in v2:
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
 access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
 create and attach functions. The caller is expected to set
 drm_display_info.panel_orientation before calling this, then this will
 check for platform specific quirks overriding the panel_orientation and if
 the panel_orientation is set after this then it will attach the property.

Changes in v6:
-Use an enum (with kerneldoc) rather then #defines for
 DRM_MODE_PANEL_ORIENTATION_*

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/Kconfig         |  1 +
 drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     | 40 ++++++++++++++++++++++
 include/drm/drm_mode_config.h   |  7 ++++
 4 files changed, 121 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 9d005ac98c2b..0b166e626eb6 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -7,6 +7,7 @@
 menuconfig DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select HDMI
 	select FB_CMDLINE
 	select I2C
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 25f4b2e9a44f..624edeb5c50d 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -24,6 +24,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
 
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
 	mutex_init(&connector->mutex);
 	connector->edid_blob_ptr = NULL;
 	connector->status = connector_status_unknown;
+	connector->display_info.panel_orientation +		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
 	drm_connector_get_cmdline_mode(connector);
 
@@ -668,6 +671,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
 	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
 };
 
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
+	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
+	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
+	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
+};
+
 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
@@ -776,6 +786,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  *
  * CRTC_ID:
  * 	Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ *	On some devices the LCD panel is mounted in the casing in such a way
+ *	that the up/top side of the panel does not match with the top side of
+ *	the device. Userspace can use this property to check for this.
+ *	Note that input coordinates from touchscreens (input devices with
+ *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ *	coordinates, so if userspace rotates the picture to adjust for
+ *	the orientation it must also apply the same transformation to the
+ *	touchscreen input coordinates.
  */
 
 int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1251,6 +1273,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
 }
 EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ *	initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_info *info = &connector->display_info;
+	struct drm_property *prop;
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		info->panel_orientation = orientation_quirk;
+
+	if (info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	prop = dev->mode_config.panel_orientation_property;
+	if (!prop) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				"panel orientation",
+				drm_panel_orientation_enum_list,
+				ARRAY_SIZE(drm_panel_orientation_enum_list));
+		if (!prop)
+			return -ENOMEM;
+
+		dev->mode_config.panel_orientation_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop,
+				   info->panel_orientation);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index df9807a3caae..51365551a57f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -175,6 +175,35 @@ enum drm_link_status {
 	DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
 };
 
+/**
+ * enum drm_panel_orientation - panel_orientation info for &drm_display_info
+ *
+ * This enum is used to track the (LCD) panel orientation. There are no
+ * separate #defines for the uapi!
+ *
+ * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any
+ *					panel orientation information (normal
+ *					for non panels) in this case the "panel
+ *					orientation" connector prop will not be
+ *					attached.
+ * @DRM_MODE_PANEL_ORIENTATION_NORMAL:	The top side of the panel matches the
+ *					top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the
+ *					bottom side of the device's casing, iow
+ *					the panel is mounted upside-down.
+ * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP:	The left side of the panel matches the
+ *					top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the
+ *					top side of the device's casing.
+ */
+enum drm_panel_orientation {
+	DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1,
+	DRM_MODE_PANEL_ORIENTATION_NORMAL = 0,
+	DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,
+	DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
 /**
  * struct drm_display_info - runtime data about the connected sink
  *
@@ -222,6 +251,15 @@ struct drm_display_info {
 #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
 #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
 
+	/**
+	 * @panel_orientation: Read only connector property for built-in panels,
+	 * indicating the orientation of the panel vs the device's casing.
+	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+	 * fb to compensate and gets exported as prop to userspace.
+	 */
+	int panel_orientation;
+
 	/**
 	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
 	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
@@ -1025,6 +1063,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 					    const struct edid *edid);
 void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
 						 uint64_t link_status);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height);
 
 /**
  * struct drm_tile_group - Tile group metadata
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index b21e827c5c78..3716e6b8fed5 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -735,6 +735,13 @@ struct drm_mode_config {
 	 */
 	struct drm_property *non_desktop_property;
 
+	/**
+	 * @panel_orientation_property: Optional connector property indicating
+	 * how the lcd-panel is mounted inside the casing (e.g. normal or
+	 * upside-down).
+	 */
+	struct drm_property *panel_orientation_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
-- 
2.14.3

[PATCH v6 4/7] drm/fb-helper: Apply panel orientation connector prop to the primary plane, v6.

[Hans de Goede]

Apply the "panel orientation" drm connector prop to the primary plane so
that fbcon and fbdev using userspace programs display the right way up.

Changes in v3:
-Use a rotation member in struct drm_fb_helper_crtc and set that from
 drm_setup_crtcs instead of looping over all crtc's to find the right one
 later
-Since we now no longer look at rotation quirks directly in the fbcon
 code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
 and we cannot use hardware rotation

Changes in v4:
-Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
 DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
 plane_state's rotation to an invalid value for disabled crtcs
 (caught by Fi.CI)

Changes in v5:
-Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
 90 / 270 degree rotation requires special handling which we lack atm
-Add a TODO comment for 90 / 270 degree hardware rotation
-Add some comments to better document the default case when mapping
 sw_rotations to fbcon_rotate_hints

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id”894
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++-
 include/drm/drm_fb_helper.h     |  8 ++++
 2 files changed, 96 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 07374008f146..3d20b77f3fb9 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -41,6 +41,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 
+#include "drm_crtc_internal.h"
 #include "drm_crtc_helper_internal.h"
 
 static bool drm_fbdev_emulation = true;
@@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
 static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
 {
 	struct drm_device *dev = fb_helper->dev;
+	struct drm_plane_state *plane_state;
 	struct drm_plane *plane;
 	struct drm_atomic_state *state;
 	int i, ret;
@@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 retry:
 	plane_mask = 0;
 	drm_for_each_plane(plane, dev) {
-		struct drm_plane_state *plane_state;
-
 		plane_state = drm_atomic_get_plane_state(state, plane);
 		if (IS_ERR(plane_state)) {
 			ret = PTR_ERR(plane_state);
@@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
+		struct drm_plane *primary = mode_set->crtc->primary;
+
+		/* Cannot fail as we've already gotten the plane state above */
+		plane_state = drm_atomic_get_new_plane_state(state, primary);
+		plane_state->rotation = fb_helper->crtc_info[i].rotation;
 
 		ret = __drm_atomic_helper_set_config(mode_set, state);
 		if (ret != 0)
@@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev,
 		if (!fb_helper->crtc_info[i].mode_set.connectors)
 			goto out_free;
 		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
+		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
 	}
 
 	i = 0;
@@ -2338,6 +2344,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	return best_score;
 }
 
+/*
+ * This function checks if rotation is necessary because of panel orientation
+ * and if it is, if it is supported.
+ * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
+ * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
+ * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
+ * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
+ * the unsupported rotation.
+ */
+static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc *fb_crtc,
+				    struct drm_connector *connector)
+{
+	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
+	uint64_t valid_mask = 0;
+	int i, rotation;
+
+	fb_crtc->rotation = DRM_MODE_ROTATE_0;
+
+	switch (connector->display_info.panel_orientation) {
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		rotation = DRM_MODE_ROTATE_180;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		rotation = DRM_MODE_ROTATE_90;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		rotation = DRM_MODE_ROTATE_270;
+		break;
+	default:
+		rotation = DRM_MODE_ROTATE_0;
+	}
+
+	/*
+	 * TODO: support 90 / 270 degree hardware rotation,
+	 * depending on the hardware this may require the framebuffer
+	 * to be in a specific tiling format.
+	 */
+	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	for (i = 0; i < plane->rotation_property->num_values; i++)
+		valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+	if (!(rotation & valid_mask)) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	fb_crtc->rotation = rotation;
+	/* Rotating in hardware, fbcon should not rotate */
+	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
+}
+
 static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			    u32 width, u32 height)
 {
@@ -2397,6 +2459,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 		drm_fb_helper_modeset_release(fb_helper,
 					      &fb_helper->crtc_info[i].mode_set);
 
+	fb_helper->sw_rotations = 0;
 	drm_fb_helper_for_each_connector(fb_helper, i) {
 		struct drm_display_mode *mode = modes[i];
 		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
@@ -2416,6 +2479,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
 			drm_connector_get(connector);
+			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
 			modeset->connectors[modeset->num_connectors++] = connector;
 			modeset->x = offset->x;
 			modeset->y = offset->y;
@@ -2457,6 +2521,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
 		}
 	}
 	mutex_unlock(&fb_helper->dev->mode_config.mutex);
+
+	switch (fb_helper->sw_rotations) {
+	case DRM_MODE_ROTATE_0:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_ROTATE_90:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_ROTATE_180:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_ROTATE_270:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	default:
+		/*
+		 * Multiple bits are set / multiple rotations requested
+		 * fbcon cannot handle separate rotation settings per
+		 * output, so fallback to unrotated.
+		 */
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+	}
 }
 
 /* Note: Drops fb_helper->lock before returning. */
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 33fe95927742..d0667e4ba886 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -48,6 +48,7 @@ struct drm_fb_helper_crtc {
 	struct drm_mode_set mode_set;
 	struct drm_display_mode *desired_mode;
 	int x, y;
+	int rotation;
 };
 
 /**
@@ -158,6 +159,13 @@ struct drm_fb_helper {
 	struct drm_fb_helper_crtc *crtc_info;
 	int connector_count;
 	int connector_info_alloc_count;
+	/**
+	 * @sw_rotations:
+	 * Bitmask of all rotations requested for panel-orientation which
+	 * could not be handled in hardware. If only one bit is set
+	 * fbdev->fbcon_rotate_hint gets set to the requested rotation.
+	 */
+	int sw_rotations;
 	/**
 	 * @connector_info:
 	 *
-- 
2.14.3

[PATCH v6 5/7] drm/i915: Add "panel orientation" property to the panel connector, v6.

[Hans de Goede]

Ideally we could use the VBT for this, that would be simple, in
intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
connector->display_info.panel_orientation accordingly and call
drm_connector_init_panel_orientation_property(), done.

Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
with an upside down LCD and where the GOP is properly rotating the
EFI fb in hardware.

So instead we end up reading the rotation from the primary plane.

This commit only implements the panel orientation property for DSI
panels on BYT / CHT hardware, as all known non normal oriented panels
sofar are only found on this hardware.

Changes in v2:
-Read back the rotation applied by the GOP from the primary plane
 instead of relying on dev_priv->vbt.dsi.config->rotation, because it
 seems that the VBT rotation filed is always 0 even on devices where the
 GOP does apply a rotation

Changes in v3:
-Rewrite the code to read back the orientation from the primary
 plane to contain all of this in intel_dsi.c instead of poking a bunch
 of holes between all the different layers

Changes in v6:
-Move hardware readout to intel_dsi_init()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/i915/intel_dsi.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index f09474b0c4d3..f67d321376e4 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1666,6 +1666,27 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
 	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
 };
 
+static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	enum i9xx_plane_id plane;
+	u32 val;
+
+	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+		if (connector->encoder->crtc_mask = BIT(PIPE_B))
+			plane = PLANE_B;
+		else
+			plane = PLANE_A;
+
+		val = I915_READ(DSPCNTR(plane));
+		if (val & DISPPLANE_ROTATE_180)
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	}
+
+	return orientation;
+}
+
 static void intel_dsi_add_properties(struct intel_connector *connector)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
@@ -1681,6 +1702,13 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 								allowed_scalers);
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
+
+		connector->base.display_info.panel_orientation +			intel_dsi_get_panel_orientation(connector);
+		drm_connector_init_panel_orientation_property(
+				&connector->base,
+				connector->panel.fixed_mode->hdisplay,
+				connector->panel.fixed_mode->vdisplay);
 	}
 }
 
-- 
2.14.3

Re: [Intel-gfx] [PATCH v6 5/7] drm/i915: Add "panel orientation" property to the panel connector, v6

[Daniel Vetter]

On Sat, Nov 25, 2017 at 06:33:39PM +0100, Hans de Goede wrote:
> Ideally we could use the VBT for this, that would be simple, in
> intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
> connector->display_info.panel_orientation accordingly and call
> drm_connector_init_panel_orientation_property(), done.
> 
> Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
> with an upside down LCD and where the GOP is properly rotating the
> EFI fb in hardware.
> 
> So instead we end up reading the rotation from the primary plane.
> 
> This commit only implements the panel orientation property for DSI
> panels on BYT / CHT hardware, as all known non normal oriented panels
> sofar are only found on this hardware.
> 
> Changes in v2:
> -Read back the rotation applied by the GOP from the primary plane
>  instead of relying on dev_priv->vbt.dsi.config->rotation, because it
>  seems that the VBT rotation filed is always 0 even on devices where the
>  GOP does apply a rotation
> 
> Changes in v3:
> -Rewrite the code to read back the orientation from the primary
>  plane to contain all of this in intel_dsi.c instead of poking a bunch
>  of holes between all the different layers
> 
> Changes in v6:
> -Move hardware readout to intel_dsi_init()

Yeah, this is what I had in mind. A small hack, but much more well
contained.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index f09474b0c4d3..f67d321376e4 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -1666,6 +1666,27 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
>  	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
>  };
>  
> +static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> +	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +	enum i9xx_plane_id plane;
> +	u32 val;
> +
> +	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> +		if (connector->encoder->crtc_mask = BIT(PIPE_B))
> +			plane = PLANE_B;
> +		else
> +			plane = PLANE_A;
> +
> +		val = I915_READ(DSPCNTR(plane));
> +		if (val & DISPPLANE_ROTATE_180)
> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +	}
> +
> +	return orientation;
> +}
> +
>  static void intel_dsi_add_properties(struct intel_connector *connector)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> @@ -1681,6 +1702,13 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
>  								allowed_scalers);
>  
>  		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
> +
> +		connector->base.display_info.panel_orientation > +			intel_dsi_get_panel_orientation(connector);
> +		drm_connector_init_panel_orientation_property(
> +				&connector->base,
> +				connector->panel.fixed_mode->hdisplay,
> +				connector->panel.fixed_mode->vdisplay);
>  	}
>  }
>  
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [Intel-gfx] [PATCH v6 5/7] drm/i915: Add "panel orientation" property to the panel connector, v6

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1861 bytes --]

Hi Hans,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v4.15-rc1 next-20171128]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hans-de-Goede/drm-fbdev-Panel-orientation-connector-property-support/20171128-225025
config: i386-randconfig-x074-201748 (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers/gpu/drm/i915/intel_dsi.c: In function 'intel_dsi_get_panel_orientation':
>> drivers/gpu/drm/i915/intel_dsi.c:1672:21: error: storage size of 'plane' isn't known
     enum i9xx_plane_id plane;
                        ^~~~~
   drivers/gpu/drm/i915/intel_dsi.c:1672:21: warning: unused variable 'plane' [-Wunused-variable]

vim +1672 drivers/gpu/drm/i915/intel_dsi.c

  1667	
  1668	static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
  1669	{
  1670		struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
  1671		int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> 1672		enum i9xx_plane_id plane;
  1673		u32 val;
  1674	
  1675		if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
  1676			if (connector->encoder->crtc_mask == BIT(PIPE_B))
  1677				plane = PLANE_B;
  1678			else
  1679				plane = PLANE_A;
  1680	
  1681			val = I915_READ(DSPCNTR(plane));
  1682			if (val & DISPPLANE_ROTATE_180)
  1683				orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
  1684		}
  1685	
  1686		return orientation;
  1687	}
  1688	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 26541 bytes --]

Re: [Intel-gfx] [PATCH v6 5/7] drm/i915: Add "panel orientation" property to the panel connector, v6

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1922 bytes --]

Hi Hans,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v4.15-rc1 next-20171128]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Hans-de-Goede/drm-fbdev-Panel-orientation-connector-property-support/20171128-225025
config: x86_64-randconfig-x012-201748 (attached as .config)
compiler: gcc-7 (Debian 7.2.0-12) 7.2.1 20171025
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

   drivers/gpu/drm/i915/intel_dsi.c: In function 'intel_dsi_get_panel_orientation':
   drivers/gpu/drm/i915/intel_dsi.c:1672:21: error: storage size of 'plane' isn't known
     enum i9xx_plane_id plane;
                        ^~~~~
>> drivers/gpu/drm/i915/intel_dsi.c:1672:21: error: unused variable 'plane' [-Werror=unused-variable]
   cc1: all warnings being treated as errors

vim +/plane +1672 drivers/gpu/drm/i915/intel_dsi.c

  1667	
  1668	static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
  1669	{
  1670		struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
  1671		int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> 1672		enum i9xx_plane_id plane;
  1673		u32 val;
  1674	
  1675		if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
  1676			if (connector->encoder->crtc_mask == BIT(PIPE_B))
  1677				plane = PLANE_B;
  1678			else
  1679				plane = PLANE_A;
  1680	
  1681			val = I915_READ(DSPCNTR(plane));
  1682			if (val & DISPPLANE_ROTATE_180)
  1683				orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
  1684		}
  1685	
  1686		return orientation;
  1687	}
  1688	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28526 bytes --]

[PATCH v6 6/7] efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirk

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but rotated by 90 degrees. In this case we want the console to
automatically be rotated to compensate.

The drm subsys has a quirk table for this, use the
drm_get_panel_orientation_quirk function to get the panel orientation
and set info->fbcon_rotate_hint based on this, so that the fbcon console
on top of efifb gets automatically rotated to compensate for the panel
orientation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/Kconfig |  1 +
 drivers/video/fbdev/efifb.c | 21 ++++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 2f615b7f1c9f..2566cfbdebfb 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -772,6 +772,7 @@ config FB_VESA
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
 	depends on (FB = y) && !IA64 && EFI
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index d1bf9c2a78a7..88697ab1005b 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -16,6 +16,8 @@
 #include <linux/screen_info.h>
 #include <video/vga.h>
 #include <asm/efi.h>
+#include <drm/drm_utils.h> /* For drm_get_panel_orientation_quirk */
+#include <drm/drm_mode.h>  /* For DRM_MODE_PANEL_ORIENTATION_* */
 
 static bool request_mem_succeeded = false;
 static bool nowc = false;
@@ -157,7 +159,7 @@ static u64 bar_offset;
 static int efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
-	int err;
+	int err, orientation;
 	unsigned int size_vmode;
 	unsigned int size_remap;
 	unsigned int size_total;
@@ -329,6 +331,23 @@ static int efifb_probe(struct platform_device *dev)
 	info->fix = efifb_fix;
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE;
 
+	orientation = drm_get_panel_orientation_quirk(efifb_defined.xres,
+						      efifb_defined.yres);
+	switch (orientation) {
+	default:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	}
+
 	err = sysfs_create_groups(&dev->dev.kobj, efifb_groups);
 	if (err) {
 		pr_err("efifb: cannot add sysfs attrs\n");
-- 
2.14.3

[PATCH v6 7/7] fbcon: Remove dmi quirk table

[Hans de Goede]

This is now all handled in the drivers and communicated through
fb_info.fbcon_rotate_hint.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/Makefile           |   3 -
 drivers/video/fbdev/core/fbcon.c            |   4 +-
 drivers/video/fbdev/core/fbcon.h            |   6 --
 drivers/video/fbdev/core/fbcon_dmi_quirks.c | 145 ----------------------------
 4 files changed, 2 insertions(+), 156 deletions(-)
 delete mode 100644 drivers/video/fbdev/core/fbcon_dmi_quirks.c

diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index d34fd182ca68..37710316a680 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -15,9 +15,6 @@ ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
 fb-y				  += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
 				     fbcon_ccw.o
 endif
-ifeq ($(CONFIG_DMI),y)
-fb-y				  += fbcon_dmi_quirks.o
-endif
 endif
 fb-objs                           := $(fb-y)
 
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 30014e5867db..5baf7bc054e1 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -969,7 +969,7 @@ static const char *fbcon_startup(void)
 	if (p->con_rotate = -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate = -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
@@ -1112,7 +1112,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 	if (p->con_rotate = -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate = -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 9f7744fbc962..21912a3ba32f 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -262,10 +262,4 @@ extern void fbcon_set_rotate(struct fbcon_ops *ops);
 #define fbcon_set_rotate(x) do {} while(0)
 #endif /* CONFIG_FRAMEBUFFER_CONSOLE_ROTATION */
 
-#ifdef CONFIG_DMI
-int fbcon_platform_get_rotate(struct fb_info *info);
-#else
-#define fbcon_platform_get_rotate(i) FB_ROTATE_UR
-#endif /* CONFIG_DMI */
-
 #endif /* _VIDEO_FBCON_H */
diff --git a/drivers/video/fbdev/core/fbcon_dmi_quirks.c b/drivers/video/fbdev/core/fbcon_dmi_quirks.c
deleted file mode 100644
index 6904e47d1e51..000000000000
--- a/drivers/video/fbdev/core/fbcon_dmi_quirks.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  fbcon_dmi_quirks.c -- DMI based quirk detection for fbcon
- *
- *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/dmi.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include "fbcon.h"
-
-/*
- * Some x86 clamshell design devices use portrait tablet screens and a display
- * engine which cannot rotate in hardware, so we need to rotate the fbcon to
- * compensate. Unfortunately these (cheap) devices also typically have quite
- * generic DMI data, so we match on a combination of DMI data, screen resolution
- * and a list of known BIOS dates to avoid false positives.
- */
-
-struct fbcon_dmi_rotate_data {
-	int width;
-	int height;
-	const char * const *bios_dates;
-	int rotate;
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_asus_t100ha = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CCW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_pocket = {
-	.width = 1200,
-	.height = 1920,
-	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
-		"07/05/2017", "08/07/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_win = {
-	.width = 720,
-	.height = 1280,
-	.bios_dates = (const char * const []){
-		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
-		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_itworks_tw891 = {
-	.width = 800,
-	.height = 1280,
-	.bios_dates = (const char * const []){ "10/16/2015", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_vios_lth17 = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct dmi_system_id rotate_data[] = {
-	{	/* Asus T100HA */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
-		},
-		.driver_data = (void *)&rotate_data_asus_t100ha,
-	}, {	/*
-		 * GPD Pocket, note that the the DMI data is less generic then
-		 * it seems, devices with a board-vendor of "AMI Corporation"
-		 * are quite rare, as are devices which have both board- *and*
-		 * product-id set to "Default String"
-		 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_pocket,
-	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_win,
-	}, {	/* I.T.Works TW891 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
-		},
-		.driver_data = (void *)&rotate_data_itworks_tw891,
-	}, {	/* VIOS LTH17 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "LTH17"),
-		},
-		.driver_data = (void *)&rotate_data_vios_lth17,
-	},
-	{}
-};
-
-int fbcon_platform_get_rotate(struct fb_info *info)
-{
-	const struct dmi_system_id *match;
-	const struct fbcon_dmi_rotate_data *data;
-	const char *bios_date;
-	int i;
-
-	for (match = dmi_first_match(rotate_data);
-	     match;
-	     match = dmi_first_match(match + 1)) {
-		data = match->driver_data;
-
-		if (data->width != info->var.xres ||
-		    data->height != info->var.yres)
-			continue;
-
-		if (!data->bios_dates)
-			return data->rotate;
-
-		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
-		if (!bios_date)
-			continue;
-
-		for (i = 0; data->bios_dates[i]; i++) {
-			if (!strcmp(data->bios_dates[i], bios_date))
-				return data->rotate;
-		}
-	}
-
-	return FB_ROTATE_UR;
-}
-- 
2.14.3

[PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

[Hans de Goede]

Hi All,

Here is v6 of my series to add a "panel orientation" property to
the drm-connector for the LCD panel to let userspace know about LCD
panels which are not mounted upright, as well as detecting upside-down
panels without needing quirks (like we do for 90 degree rotated screens).

Bartlomiej, can we please have your Acked-by for merging patches 1,
6 and 7 through the drm tree?

New in v6:
-Fix / reference kernel-doc comments
-Don't export the DRM_MODE_PANEL_ORIENTATION_* defines in the UAPI
-Move i915 dsi hardware rotation state read-out to intel_dsi_init()

New in v5:
-Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
-drm_fb_helper: Only use hardware (crtc primary plane) rotation for
 180 degrees for now as 9-/270 degrees rotation requires special handling

New in v4:
-Fix drm_fb_helper code setting an invalid rotation value on the primary
 plane of disabled/unused crtcs (caught by Fi.CI)

New in v3:
-As requested by Daniel v3 moves the quirks over from the fbdev
 subsys to the drm subsys. I've done this by simpy starting with a copy of
 the quirk table and eventually removing the fbdev version.

The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
discussed previously the plan is to merge all 7 patches through the
drm tree.

Regards,

Hans

[PATCH v6 1/7] fbcon: Add fbcon_rotate_hint to struct fb_info

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but upside-down or rotated 90 degrees. In this case we want the console
to automatically be rotated to compensate.

The fbdev-driver may know about the need to rotate. Add a new
fbcon_rotate_hint field to struct fb_info, which gets initialized to -1.
If the fbdev-driver knows that some sort of rotation is necessary then
it can set this field to a FB_ROTATE_* value to tell the fbcon console
driver to rotate the console.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/fbcon.c   | 18 ++++++++++++------
 drivers/video/fbdev/core/fbsysfs.c |  1 +
 include/linux/fb.h                 |  5 +++++
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 04612f938bab..fb317ed76b45 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -963,10 +963,13 @@ static const char *fbcon_startup(void)
 	ops->cur_rotate = -1;
 	ops->cur_blink_jiffies = HZ / 5;
 	info->fbcon_par = ops;
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate = -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate = -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	if (info->fix.type != FB_TYPE_TEXT) {
@@ -1103,10 +1106,13 @@ static void fbcon_init(struct vc_data *vc, int init)
 
 	ops = info->fbcon_par;
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate = -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate = -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	cols = vc->vc_cols;
diff --git a/drivers/video/fbdev/core/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 15755ce1d26c..e31a182b42bf 100644
--- a/drivers/video/fbdev/core/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
@@ -58,6 +58,7 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
 		info->par = p + fb_info_size;
 
 	info->device = dev;
+	info->fbcon_rotate_hint = -1;
 
 #ifdef CONFIG_FB_BACKLIGHT
 	mutex_init(&info->bl_curve_mutex);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index bc24e48e396d..d1e5bed39140 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -465,6 +465,11 @@ struct fb_info {
 	atomic_t count;
 	int node;
 	int flags;
+	/*
+	 * -1 by default, set to a FB_ROTATE_* value by the driver, if it knows
+	 * a lcd is not mounted upright and fbcon should rotate to compensate.
+	 */
+	int fbcon_rotate_hint;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
 	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
 	struct fb_var_screeninfo var;	/* Current var */
-- 
2.14.3

[PATCH v6 2/7] drm: Add panel orientation quirks, v6.

[Hans de Goede]

Some x86 clamshell design devices use portrait tablet screens and a display
engine which cannot rotate in hardware, so the firmware just leaves things
as is and we cannot figure out that the display is oriented non upright
from the hardware.

So at least on x86, we need a quirk table for this. This commit adds a DMI
based quirk table which is initially populated with 5 such devices: Asus
T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.

This quirk table will be used by the drm code to let userspace know that
the display is not mounted upright inside the devices case through a new
panel orientation drm-connector property, as well as to tell fbcon to
rotate the console so that it shows the right way up.

Changes in v5:
-Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()
-Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
 keeping only the (identical) sys_vendor and product_name matches.
 This is necessary because an older version of the bios has
 board_vendor set to VOIS instead of VIOS

Changes in v6:
-Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 Documentation/gpu/drm-kms-helpers.rst          |   3 +
 drivers/gpu/drm/Kconfig                        |   3 +
 drivers/gpu/drm/Makefile                       |   1 +
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 174 +++++++++++++++++++++++++
 include/drm/drm_utils.h                        |  18 +++
 5 files changed, 199 insertions(+)
 create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
 create mode 100644 include/drm/drm_utils.h

diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
index 13dd237418cc..3ea622876b67 100644
--- a/Documentation/gpu/drm-kms-helpers.rst
+++ b/Documentation/gpu/drm-kms-helpers.rst
@@ -163,6 +163,9 @@ Panel Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_panel.c
    :export:
 
+.. kernel-doc:: drivers/gpu/drm/drm_panel_orientation_quirks.c
+   :export:
+
 Display Port Helper Functions Reference
 =================== 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4d9f21831741..9d005ac98c2b 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -26,6 +26,9 @@ config DRM_MIPI_DSI
 	bool
 	depends on DRM
 
+config DRM_PANEL_ORIENTATION_QUIRKS
+	tristate
+
 config DRM_DP_AUX_CHARDEV
 	bool "DRM DP AUX Interface"
 	depends on DRM
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index e9500844333e..e5bf68b9c171 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
 
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
+obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
 obj-$(CONFIG_DRM_ARM)	+= arm/
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
new file mode 100644
index 000000000000..b8765e2ed1d6
--- /dev/null
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -0,0 +1,174 @@
+/*
+ *  drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
+ *
+ *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#include <linux/dmi.h>
+#include <drm/drm_connector.h>
+
+#ifdef CONFIG_DMI
+
+/*
+ * Some x86 clamshell design devices use portrait tablet screens and a display
+ * engine which cannot rotate in hardware, so we need to rotate the fbcon to
+ * compensate. Unfortunately these (cheap) devices also typically have quite
+ * generic DMI data, so we match on a combination of DMI data, screen resolution
+ * and a list of known BIOS dates to avoid false positives.
+ */
+
+struct drm_dmi_panel_orientation_data {
+	int width;
+	int height;
+	const char * const *bios_dates;
+	int orientation;
+};
+
+static const struct drm_dmi_panel_orientation_data asus_t100ha = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_pocket = {
+	.width = 1200,
+	.height = 1920,
+	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
+		"07/05/2017", "08/07/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_win = {
+	.width = 720,
+	.height = 1280,
+	.bios_dates = (const char * const []){
+		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
+		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
+	.width = 800,
+	.height = 1280,
+	.bios_dates = (const char * const []){ "10/16/2015", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data vios_lth17 = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct dmi_system_id orientation_data[] = {
+	{	/* Asus T100HA */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
+		},
+		.driver_data = (void *)&asus_t100ha,
+	}, {	/*
+		 * GPD Pocket, note that the the DMI data is less generic then
+		 * it seems, devices with a board-vendor of "AMI Corporation"
+		 * are quite rare, as are devices which have both board- *and*
+		 * product-id set to "Default String"
+		 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_pocket,
+	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_win,
+	}, {	/* I.T.Works TW891 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
+		},
+		.driver_data = (void *)&itworks_tw891,
+	}, {	/* VIOS LTH17 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
+		},
+		.driver_data = (void *)&vios_lth17,
+	},
+	{}
+};
+
+/**
+ * drm_get_panel_orientation_quirk - Check for panel orientation quirks
+ * @width: width in pixels of the panel
+ * @height: height in pixels of the panel
+ *
+ * This function checks for platform specific (e.g. DMI based) quirks
+ * providing info on panel_orientation for systems where this cannot be
+ * probed from the hard-/firm-ware. To avoid false-positive this function
+ * takes the panel resolution as argument and checks that against the
+ * resolution expected by the quirk-table entry.
+ *
+ * Note this function is also used outside of the drm-subsys, by for example
+ * the efifb code. Because of this this function gets compiled into its own
+ * kernel-module when built as a module.
+ *
+ * Returns:
+ * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
+ * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
+ */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	const struct dmi_system_id *match;
+	const struct drm_dmi_panel_orientation_data *data;
+	const char *bios_date;
+	int i;
+
+	for (match = dmi_first_match(orientation_data);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		data = match->driver_data;
+
+		if (data->width != width ||
+		    data->height != height)
+			continue;
+
+		if (!data->bios_dates)
+			return data->orientation;
+
+		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
+		if (!bios_date)
+			continue;
+
+		for (i = 0; data->bios_dates[i]; i++) {
+			if (!strcmp(data->bios_dates[i], bios_date))
+				return data->orientation;
+		}
+	}
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#else
+
+/* There are no quirks for non x86 devices yet */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#endif
diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
new file mode 100644
index 000000000000..cea362aeaffe
--- /dev/null
+++ b/include/drm/drm_utils.h
@@ -0,0 +1,18 @@
+/*
+ * Function prototypes for misc. drm utility functions.
+ * Specifically this file is for function prototypes for functions which
+ * may also be used outside of drm code (e.g. in fbdev drivers).
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRM_UTILS_H__
+#define __DRM_UTILS_H__
+
+int drm_get_panel_orientation_quirk(int width, int height);
+
+#endif
-- 
2.14.3

[PATCH v6 3/7] drm: Add support for a panel-orientation connector property, v6

[Hans de Goede]

On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).

This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.

Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.

Changes in v2:
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
 access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
 create and attach functions. The caller is expected to set
 drm_display_info.panel_orientation before calling this, then this will
 check for platform specific quirks overriding the panel_orientation and if
 the panel_orientation is set after this then it will attach the property.

Changes in v6:
-Use an enum (with kerneldoc) rather then #defines for
 DRM_MODE_PANEL_ORIENTATION_*

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/Kconfig         |  1 +
 drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     | 40 ++++++++++++++++++++++
 include/drm/drm_mode_config.h   |  7 ++++
 4 files changed, 121 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 9d005ac98c2b..0b166e626eb6 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -7,6 +7,7 @@
 menuconfig DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select HDMI
 	select FB_CMDLINE
 	select I2C
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 25f4b2e9a44f..624edeb5c50d 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -24,6 +24,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
 
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
 	mutex_init(&connector->mutex);
 	connector->edid_blob_ptr = NULL;
 	connector->status = connector_status_unknown;
+	connector->display_info.panel_orientation +		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
 	drm_connector_get_cmdline_mode(connector);
 
@@ -668,6 +671,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
 	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
 };
 
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
+	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
+	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
+	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
+};
+
 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
@@ -776,6 +786,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  *
  * CRTC_ID:
  * 	Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ *	On some devices the LCD panel is mounted in the casing in such a way
+ *	that the up/top side of the panel does not match with the top side of
+ *	the device. Userspace can use this property to check for this.
+ *	Note that input coordinates from touchscreens (input devices with
+ *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ *	coordinates, so if userspace rotates the picture to adjust for
+ *	the orientation it must also apply the same transformation to the
+ *	touchscreen input coordinates.
  */
 
 int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1251,6 +1273,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
 }
 EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ *	initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_info *info = &connector->display_info;
+	struct drm_property *prop;
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		info->panel_orientation = orientation_quirk;
+
+	if (info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	prop = dev->mode_config.panel_orientation_property;
+	if (!prop) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				"panel orientation",
+				drm_panel_orientation_enum_list,
+				ARRAY_SIZE(drm_panel_orientation_enum_list));
+		if (!prop)
+			return -ENOMEM;
+
+		dev->mode_config.panel_orientation_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop,
+				   info->panel_orientation);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 66d6c99d15e5..f39ff52feb3b 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -175,6 +175,35 @@ enum drm_link_status {
 	DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
 };
 
+/**
+ * enum drm_panel_orientation - panel_orientation info for &drm_display_info
+ *
+ * This enum is used to track the (LCD) panel orientation. There are no
+ * separate #defines for the uapi!
+ *
+ * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any
+ *					panel orientation information (normal
+ *					for non panels) in this case the "panel
+ *					orientation" connector prop will not be
+ *					attached.
+ * @DRM_MODE_PANEL_ORIENTATION_NORMAL:	The top side of the panel matches the
+ *					top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the
+ *					bottom side of the device's casing, iow
+ *					the panel is mounted upside-down.
+ * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP:	The left side of the panel matches the
+ *					top side of the device's casing.
+ * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the
+ *					top side of the device's casing.
+ */
+enum drm_panel_orientation {
+	DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1,
+	DRM_MODE_PANEL_ORIENTATION_NORMAL = 0,
+	DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,
+	DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
 /**
  * struct drm_display_info - runtime data about the connected sink
  *
@@ -222,6 +251,15 @@ struct drm_display_info {
 #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
 #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
 
+	/**
+	 * @panel_orientation: Read only connector property for built-in panels,
+	 * indicating the orientation of the panel vs the device's casing.
+	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+	 * fb to compensate and gets exported as prop to userspace.
+	 */
+	int panel_orientation;
+
 	/**
 	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
 	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
@@ -1035,6 +1073,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 					    const struct edid *edid);
 void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
 						 uint64_t link_status);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height);
 
 /**
  * struct drm_tile_group - Tile group metadata
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 5306ebd537b2..cb9ffbda36cc 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -735,6 +735,13 @@ struct drm_mode_config {
 	 */
 	struct drm_property *non_desktop_property;
 
+	/**
+	 * @panel_orientation_property: Optional connector property indicating
+	 * how the lcd-panel is mounted inside the casing (e.g. normal or
+	 * upside-down).
+	 */
+	struct drm_property *panel_orientation_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
-- 
2.14.3

[PATCH v6 4/7] drm/fb-helper: Apply panel orientation connector prop to the primary plane, v6.

[Hans de Goede]

Apply the "panel orientation" drm connector prop to the primary plane so
that fbcon and fbdev using userspace programs display the right way up.

Changes in v3:
-Use a rotation member in struct drm_fb_helper_crtc and set that from
 drm_setup_crtcs instead of looping over all crtc's to find the right one
 later
-Since we now no longer look at rotation quirks directly in the fbcon
 code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
 and we cannot use hardware rotation

Changes in v4:
-Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
 DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
 plane_state's rotation to an invalid value for disabled crtcs
 (caught by Fi.CI)

Changes in v5:
-Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
 90 / 270 degree rotation requires special handling which we lack atm
-Add a TODO comment for 90 / 270 degree hardware rotation
-Add some comments to better document the default case when mapping
 sw_rotations to fbcon_rotate_hints

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id”894
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++-
 include/drm/drm_fb_helper.h     |  8 ++++
 2 files changed, 96 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 832739ff58bf..57d6bad379f8 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -41,6 +41,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 
+#include "drm_crtc_internal.h"
 #include "drm_crtc_helper_internal.h"
 
 static bool drm_fbdev_emulation = true;
@@ -356,6 +357,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
 static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
 {
 	struct drm_device *dev = fb_helper->dev;
+	struct drm_plane_state *plane_state;
 	struct drm_plane *plane;
 	struct drm_atomic_state *state;
 	int i, ret;
@@ -374,8 +376,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 retry:
 	plane_mask = 0;
 	drm_for_each_plane(plane, dev) {
-		struct drm_plane_state *plane_state;
-
 		plane_state = drm_atomic_get_plane_state(state, plane);
 		if (IS_ERR(plane_state)) {
 			ret = PTR_ERR(plane_state);
@@ -398,6 +398,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
+		struct drm_plane *primary = mode_set->crtc->primary;
+
+		/* Cannot fail as we've already gotten the plane state above */
+		plane_state = drm_atomic_get_new_plane_state(state, primary);
+		plane_state->rotation = fb_helper->crtc_info[i].rotation;
 
 		ret = __drm_atomic_helper_set_config(mode_set, state);
 		if (ret != 0)
@@ -829,6 +834,7 @@ int drm_fb_helper_init(struct drm_device *dev,
 		if (!fb_helper->crtc_info[i].mode_set.connectors)
 			goto out_free;
 		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
+		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
 	}
 
 	i = 0;
@@ -2353,6 +2359,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	return best_score;
 }
 
+/*
+ * This function checks if rotation is necessary because of panel orientation
+ * and if it is, if it is supported.
+ * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
+ * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
+ * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
+ * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
+ * the unsupported rotation.
+ */
+static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc *fb_crtc,
+				    struct drm_connector *connector)
+{
+	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
+	uint64_t valid_mask = 0;
+	int i, rotation;
+
+	fb_crtc->rotation = DRM_MODE_ROTATE_0;
+
+	switch (connector->display_info.panel_orientation) {
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		rotation = DRM_MODE_ROTATE_180;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		rotation = DRM_MODE_ROTATE_90;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		rotation = DRM_MODE_ROTATE_270;
+		break;
+	default:
+		rotation = DRM_MODE_ROTATE_0;
+	}
+
+	/*
+	 * TODO: support 90 / 270 degree hardware rotation,
+	 * depending on the hardware this may require the framebuffer
+	 * to be in a specific tiling format.
+	 */
+	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	for (i = 0; i < plane->rotation_property->num_values; i++)
+		valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+	if (!(rotation & valid_mask)) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	fb_crtc->rotation = rotation;
+	/* Rotating in hardware, fbcon should not rotate */
+	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
+}
+
 static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			    u32 width, u32 height)
 {
@@ -2412,6 +2474,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 		drm_fb_helper_modeset_release(fb_helper,
 					      &fb_helper->crtc_info[i].mode_set);
 
+	fb_helper->sw_rotations = 0;
 	drm_fb_helper_for_each_connector(fb_helper, i) {
 		struct drm_display_mode *mode = modes[i];
 		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
@@ -2431,6 +2494,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
 			drm_connector_get(connector);
+			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
 			modeset->connectors[modeset->num_connectors++] = connector;
 			modeset->x = offset->x;
 			modeset->y = offset->y;
@@ -2472,6 +2536,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
 		}
 	}
 	mutex_unlock(&fb_helper->dev->mode_config.mutex);
+
+	switch (fb_helper->sw_rotations) {
+	case DRM_MODE_ROTATE_0:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_ROTATE_90:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_ROTATE_180:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_ROTATE_270:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	default:
+		/*
+		 * Multiple bits are set / multiple rotations requested
+		 * fbcon cannot handle separate rotation settings per
+		 * output, so fallback to unrotated.
+		 */
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+	}
 }
 
 /* Note: Drops fb_helper->lock before returning. */
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 877e5b395c02..1494b12a984a 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -48,6 +48,7 @@ struct drm_fb_helper_crtc {
 	struct drm_mode_set mode_set;
 	struct drm_display_mode *desired_mode;
 	int x, y;
+	int rotation;
 };
 
 /**
@@ -158,6 +159,13 @@ struct drm_fb_helper {
 	struct drm_fb_helper_crtc *crtc_info;
 	int connector_count;
 	int connector_info_alloc_count;
+	/**
+	 * @sw_rotations:
+	 * Bitmask of all rotations requested for panel-orientation which
+	 * could not be handled in hardware. If only one bit is set
+	 * fbdev->fbcon_rotate_hint gets set to the requested rotation.
+	 */
+	int sw_rotations;
 	/**
 	 * @connector_info:
 	 *
-- 
2.14.3

[PATCH v6 5/7] drm/i915: Add "panel orientation" property to the panel connector, v6.

[Hans de Goede]

Ideally we could use the VBT for this, that would be simple, in
intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
connector->display_info.panel_orientation accordingly and call
drm_connector_init_panel_orientation_property(), done.

Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
with an upside down LCD and where the GOP is properly rotating the
EFI fb in hardware.

So instead we end up reading the rotation from the primary plane.

This commit only implements the panel orientation property for DSI
panels on BYT / CHT hardware, as all known non normal oriented panels
sofar are only found on this hardware.

Changes in v2:
-Read back the rotation applied by the GOP from the primary plane
 instead of relying on dev_priv->vbt.dsi.config->rotation, because it
 seems that the VBT rotation filed is always 0 even on devices where the
 GOP does apply a rotation

Changes in v3:
-Rewrite the code to read back the orientation from the primary
 plane to contain all of this in intel_dsi.c instead of poking a bunch
 of holes between all the different layers

Changes in v6:
-Move hardware readout to intel_dsi_init()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/gpu/drm/i915/intel_dsi.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index f09474b0c4d3..f67d321376e4 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1666,6 +1666,27 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
 	.atomic_duplicate_state = intel_digital_connector_duplicate_state,
 };
 
+static int intel_dsi_get_panel_orientation(struct intel_connector *connector)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+	int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+	enum i9xx_plane_id plane;
+	u32 val;
+
+	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
+		if (connector->encoder->crtc_mask = BIT(PIPE_B))
+			plane = PLANE_B;
+		else
+			plane = PLANE_A;
+
+		val = I915_READ(DSPCNTR(plane));
+		if (val & DISPPLANE_ROTATE_180)
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+	}
+
+	return orientation;
+}
+
 static void intel_dsi_add_properties(struct intel_connector *connector)
 {
 	struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
@@ -1681,6 +1702,13 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
 								allowed_scalers);
 
 		connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
+
+		connector->base.display_info.panel_orientation +			intel_dsi_get_panel_orientation(connector);
+		drm_connector_init_panel_orientation_property(
+				&connector->base,
+				connector->panel.fixed_mode->hdisplay,
+				connector->panel.fixed_mode->vdisplay);
 	}
 }
 
-- 
2.14.3

[PATCH v6 6/7] efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirk

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but rotated by 90 degrees. In this case we want the console to
automatically be rotated to compensate.

The drm subsys has a quirk table for this, use the
drm_get_panel_orientation_quirk function to get the panel orientation
and set info->fbcon_rotate_hint based on this, so that the fbcon console
on top of efifb gets automatically rotated to compensate for the panel
orientation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/Kconfig |  1 +
 drivers/video/fbdev/efifb.c | 21 ++++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5e58f5ec0a28..c4a90c497839 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -772,6 +772,7 @@ config FB_VESA
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
 	depends on (FB = y) && !IA64 && EFI
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index d1bf9c2a78a7..88697ab1005b 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -16,6 +16,8 @@
 #include <linux/screen_info.h>
 #include <video/vga.h>
 #include <asm/efi.h>
+#include <drm/drm_utils.h> /* For drm_get_panel_orientation_quirk */
+#include <drm/drm_mode.h>  /* For DRM_MODE_PANEL_ORIENTATION_* */
 
 static bool request_mem_succeeded = false;
 static bool nowc = false;
@@ -157,7 +159,7 @@ static u64 bar_offset;
 static int efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
-	int err;
+	int err, orientation;
 	unsigned int size_vmode;
 	unsigned int size_remap;
 	unsigned int size_total;
@@ -329,6 +331,23 @@ static int efifb_probe(struct platform_device *dev)
 	info->fix = efifb_fix;
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE;
 
+	orientation = drm_get_panel_orientation_quirk(efifb_defined.xres,
+						      efifb_defined.yres);
+	switch (orientation) {
+	default:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	}
+
 	err = sysfs_create_groups(&dev->dev.kobj, efifb_groups);
 	if (err) {
 		pr_err("efifb: cannot add sysfs attrs\n");
-- 
2.14.3

[PATCH v6 7/7] fbcon: Remove dmi quirk table

[Hans de Goede]

This is now all handled in the drivers and communicated through
fb_info.fbcon_rotate_hint.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/Makefile           |   3 -
 drivers/video/fbdev/core/fbcon.c            |   4 +-
 drivers/video/fbdev/core/fbcon.h            |   6 --
 drivers/video/fbdev/core/fbcon_dmi_quirks.c | 145 ----------------------------
 4 files changed, 2 insertions(+), 156 deletions(-)
 delete mode 100644 drivers/video/fbdev/core/fbcon_dmi_quirks.c

diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index d34fd182ca68..37710316a680 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -15,9 +15,6 @@ ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
 fb-y				  += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
 				     fbcon_ccw.o
 endif
-ifeq ($(CONFIG_DMI),y)
-fb-y				  += fbcon_dmi_quirks.o
-endif
 endif
 fb-objs                           := $(fb-y)
 
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index fb317ed76b45..157a40670a47 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -968,7 +968,7 @@ static const char *fbcon_startup(void)
 	if (p->con_rotate = -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate = -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
@@ -1111,7 +1111,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 	if (p->con_rotate = -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate = -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 18f3ac144237..3746828356ed 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -261,10 +261,4 @@ extern void fbcon_set_rotate(struct fbcon_ops *ops);
 #define fbcon_set_rotate(x) do {} while(0)
 #endif /* CONFIG_FRAMEBUFFER_CONSOLE_ROTATION */
 
-#ifdef CONFIG_DMI
-int fbcon_platform_get_rotate(struct fb_info *info);
-#else
-#define fbcon_platform_get_rotate(i) FB_ROTATE_UR
-#endif /* CONFIG_DMI */
-
 #endif /* _VIDEO_FBCON_H */
diff --git a/drivers/video/fbdev/core/fbcon_dmi_quirks.c b/drivers/video/fbdev/core/fbcon_dmi_quirks.c
deleted file mode 100644
index 6904e47d1e51..000000000000
--- a/drivers/video/fbdev/core/fbcon_dmi_quirks.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  fbcon_dmi_quirks.c -- DMI based quirk detection for fbcon
- *
- *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/dmi.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include "fbcon.h"
-
-/*
- * Some x86 clamshell design devices use portrait tablet screens and a display
- * engine which cannot rotate in hardware, so we need to rotate the fbcon to
- * compensate. Unfortunately these (cheap) devices also typically have quite
- * generic DMI data, so we match on a combination of DMI data, screen resolution
- * and a list of known BIOS dates to avoid false positives.
- */
-
-struct fbcon_dmi_rotate_data {
-	int width;
-	int height;
-	const char * const *bios_dates;
-	int rotate;
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_asus_t100ha = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CCW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_pocket = {
-	.width = 1200,
-	.height = 1920,
-	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
-		"07/05/2017", "08/07/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_win = {
-	.width = 720,
-	.height = 1280,
-	.bios_dates = (const char * const []){
-		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
-		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_itworks_tw891 = {
-	.width = 800,
-	.height = 1280,
-	.bios_dates = (const char * const []){ "10/16/2015", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_vios_lth17 = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct dmi_system_id rotate_data[] = {
-	{	/* Asus T100HA */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
-		},
-		.driver_data = (void *)&rotate_data_asus_t100ha,
-	}, {	/*
-		 * GPD Pocket, note that the the DMI data is less generic then
-		 * it seems, devices with a board-vendor of "AMI Corporation"
-		 * are quite rare, as are devices which have both board- *and*
-		 * product-id set to "Default String"
-		 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_pocket,
-	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_win,
-	}, {	/* I.T.Works TW891 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
-		},
-		.driver_data = (void *)&rotate_data_itworks_tw891,
-	}, {	/* VIOS LTH17 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "LTH17"),
-		},
-		.driver_data = (void *)&rotate_data_vios_lth17,
-	},
-	{}
-};
-
-int fbcon_platform_get_rotate(struct fb_info *info)
-{
-	const struct dmi_system_id *match;
-	const struct fbcon_dmi_rotate_data *data;
-	const char *bios_date;
-	int i;
-
-	for (match = dmi_first_match(rotate_data);
-	     match;
-	     match = dmi_first_match(match + 1)) {
-		data = match->driver_data;
-
-		if (data->width != info->var.xres ||
-		    data->height != info->var.yres)
-			continue;
-
-		if (!data->bios_dates)
-			return data->rotate;
-
-		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
-		if (!bios_date)
-			continue;
-
-		for (i = 0; data->bios_dates[i]; i++) {
-			if (!strcmp(data->bios_dates[i], bios_date))
-				return data->rotate;
-		}
-	}
-
-	return FB_ROTATE_UR;
-}
-- 
2.14.3

Re: [Intel-gfx] [PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

[Daniel Vetter]

On Sat, Nov 25, 2017 at 06:33:34PM +0100, Hans de Goede wrote:
> Hi All,
> 
> Here is v6 of my series to add a "panel orientation" property to
> the drm-connector for the LCD panel to let userspace know about LCD
> panels which are not mounted upright, as well as detecting upside-down
> panels without needing quirks (like we do for 90 degree rotated screens).
> 
> Bartlomiej, can we please have your Acked-by for merging patches 1,
> 6 and 7 through the drm tree?
> 
> New in v6:
> -Fix / reference kernel-doc comments
> -Don't export the DRM_MODE_PANEL_ORIENTATION_* defines in the UAPI
> -Move i915 dsi hardware rotation state read-out to intel_dsi_init()
> 
> New in v5:
> -Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
> -drm_fb_helper: Only use hardware (crtc primary plane) rotation for
>  180 degrees for now as 9-/270 degrees rotation requires special handling
> 
> New in v4:
> -Fix drm_fb_helper code setting an invalid rotation value on the primary
>  plane of disabled/unused crtcs (caught by Fi.CI)
> 
> New in v3:
> -As requested by Daniel v3 moves the quirks over from the fbdev
>  subsys to the drm subsys. I've done this by simpy starting with a copy of
>  the quirk table and eventually removing the fbdev version.
> 
> The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
> are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
> discussed previously the plan is to merge all 7 patches through the
> drm tree.

I think from the drm and i915 side of things this all looks ready (well
pls double-check that CI also approves before merging).

Just needs an ack/review from Bart, and then it's probably simplest if you
merge it all through drm-misc - the i915 side is tiny.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [Intel-gfx] [PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

[Hans de Goede]

Hi,

On 28-11-17 11:27, Daniel Vetter wrote:
> On Sat, Nov 25, 2017 at 06:33:34PM +0100, Hans de Goede wrote:
>> Hi All,
>>
>> Here is v6 of my series to add a "panel orientation" property to
>> the drm-connector for the LCD panel to let userspace know about LCD
>> panels which are not mounted upright, as well as detecting upside-down
>> panels without needing quirks (like we do for 90 degree rotated screens).
>>
>> Bartlomiej, can we please have your Acked-by for merging patches 1,
>> 6 and 7 through the drm tree?
>>
>> New in v6:
>> -Fix / reference kernel-doc comments
>> -Don't export the DRM_MODE_PANEL_ORIENTATION_* defines in the UAPI
>> -Move i915 dsi hardware rotation state read-out to intel_dsi_init()
>>
>> New in v5:
>> -Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
>> -drm_fb_helper: Only use hardware (crtc primary plane) rotation for
>>   180 degrees for now as 9-/270 degrees rotation requires special handling
>>
>> New in v4:
>> -Fix drm_fb_helper code setting an invalid rotation value on the primary
>>   plane of disabled/unused crtcs (caught by Fi.CI)
>>
>> New in v3:
>> -As requested by Daniel v3 moves the quirks over from the fbdev
>>   subsys to the drm subsys. I've done this by simpy starting with a copy of
>>   the quirk table and eventually removing the fbdev version.
>>
>> The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
>> are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
>> discussed previously the plan is to merge all 7 patches through the
>> drm tree.
> 
> I think from the drm and i915 side of things this all looks ready (well
> pls double-check that CI also approves before merging).

The CI says state is warning, see:
https://patchwork.freedesktop.org/series/32447/
and specifically:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7290/shards.html

Which I find hard to read as I see no tests going to orange, only
3 tests moving to red, which AFAICT is failed. Clicking on the tests
link to get history all 3 tests seem to fail in the same way quite
often (2 out of 3) or somewhat often (the last one). Also the failures
seem unrelated to my changes

So how do I deal with this, resend v7 to get CI to run again and hope
I get a success result for all tests this time ?

> Just needs an ack/review from Bart, and then it's probably simplest if you
> merge it all through drm-misc - the i915 side is tiny.

Ok, I will wait for an Ack from Bart and then merge this through drm-misc,
thank you for the review.

Regards,

Hans

Re: [Intel-gfx] [PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

[Daniel Vetter]

On Tue, Nov 28, 2017 at 02:36:09PM +0100, Hans de Goede wrote:
> Hi,
> 
> On 28-11-17 11:27, Daniel Vetter wrote:
> > On Sat, Nov 25, 2017 at 06:33:34PM +0100, Hans de Goede wrote:
> > > Hi All,
> > > 
> > > Here is v6 of my series to add a "panel orientation" property to
> > > the drm-connector for the LCD panel to let userspace know about LCD
> > > panels which are not mounted upright, as well as detecting upside-down
> > > panels without needing quirks (like we do for 90 degree rotated screens).
> > > 
> > > Bartlomiej, can we please have your Acked-by for merging patches 1,
> > > 6 and 7 through the drm tree?
> > > 
> > > New in v6:
> > > -Fix / reference kernel-doc comments
> > > -Don't export the DRM_MODE_PANEL_ORIENTATION_* defines in the UAPI
> > > -Move i915 dsi hardware rotation state read-out to intel_dsi_init()
> > > 
> > > New in v5:
> > > -Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
> > > -drm_fb_helper: Only use hardware (crtc primary plane) rotation for
> > >   180 degrees for now as 9-/270 degrees rotation requires special handling
> > > 
> > > New in v4:
> > > -Fix drm_fb_helper code setting an invalid rotation value on the primary
> > >   plane of disabled/unused crtcs (caught by Fi.CI)
> > > 
> > > New in v3:
> > > -As requested by Daniel v3 moves the quirks over from the fbdev
> > >   subsys to the drm subsys. I've done this by simpy starting with a copy of
> > >   the quirk table and eventually removing the fbdev version.
> > > 
> > > The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
> > > are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
> > > discussed previously the plan is to merge all 7 patches through the
> > > drm tree.
> > 
> > I think from the drm and i915 side of things this all looks ready (well
> > pls double-check that CI also approves before merging).
> 
> The CI says state is warning, see:
> https://patchwork.freedesktop.org/series/32447/
> and specifically:
> https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7290/shards.html
> 
> Which I find hard to read as I see no tests going to orange, only
> 3 tests moving to red, which AFAICT is failed. Clicking on the tests
> link to get history all 3 tests seem to fail in the same way quite
> often (2 out of 3) or somewhat often (the last one). Also the failures
> seem unrelated to my changes
> 
> So how do I deal with this, resend v7 to get CI to run again and hope
> I get a success result for all tests this time ?

-rc1 set CI on fire, we had to entirely disable reporting shard results.

Note that in the mail report you get annotations of known bugs, and the
skip<->pass flip-floppers are fallout from CI being on fire.

So looks all good to go.
-Daniel


> 
> > Just needs an ack/review from Bart, and then it's probably simplest if you
> > merge it all through drm-misc - the i915 side is tiny.
> 
> Ok, I will wait for an Ack from Bart and then merge this through drm-misc,
> thank you for the review.
> 
> Regards,
> 
> Hans
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch