[PATCH v3 00/12] video: da8xx-fb: am335x DT support

[PATCH v3 00/12] video: da8xx-fb: am335x DT support

[Afzal Mohammed]

Hi,

This series adds DT support to da8xx-fb driver (device found on
DaVinci and AM335x SoC's). It does certain cleanup's in the process.

This series as compared to previous version handles configuration of
the LCDC clock rate by modelling as a clock divider of CCF. This would
take effect only if CCF is selected, if not, no change to  existing
method.

This makes use of Steffen Trumtrar's v16 of display timing DT support.

Testing has been done on AM335x SoC based boards like AM335x EVM. It
has also been verified that display on DA850 EVM (non-DT boot) works
as earlier.

This series is based on v3.8-rc3,
 and is dependent on,
1. Series v16 "of: add display helper" by,
        Steffen Trumtrar <s.trumtrar@pengutronix.de>
2. Patch "da8xx: Allow use by am33xx based devices" by,
        Pantelis Antoniou <panto@antoniou-consulting.com>
3. Series v3 "video: da8xx-fb: runtime timing configuration" by,
        me (Afzal Mohammed <afzal@ti.com>)

To test this series on AM335x based boards,
1. Series v2 "ARM: dts: AM33XX: lcdc support" by,
        me (Afzal Mohammed <afzal@ti.com>),
2. Series "HWMOD fixes for AM33xx PWM submodules and device tree nodes" by,
        Philip, Avinash <avinashphilip@ti.com>
3. Series "clk: divider: prepare for minimum divider" by,
        me (Afzal Mohammed <afzal@ti.com>),
4. Series "ARM: AM335x: LCDC platform support" by,
        me (Afzal Mohammed <afzal@ti.com>),
would be needed.

All above dependencies along with those required for testing is available
@ git://gitorious.org/x0148406-public/linux-kernel.git tags/da8xx-fb-dt-v3

Regards
Afzal

v3: model CCF clock divider with parent propogation if CCF selected
v2: 2 new patches - one to configure clock rate properly (12/12)and
    other to make io operations safe (1/12)

Afzal Mohammed (11):
  video: da8xx-fb: make io operations safe
  video: da8xx-fb: enable sync lost intr for v2 ip
  video: da8xx-fb: use devres
  video: da8xx-fb: ensure non-null cfg in pdata
  video: da8xx-fb: reorganize panel detection
  video: da8xx-fb: minimal dt support
  video: da8xx-fb: invoke platform callback safely
  video: da8xx-fb: obtain fb_videomode info from dt
  video: da8xx-fb: ensure pdata only for non-dt
  video: da8xx-fb: setup struct lcd_ctrl_config for dt
  video: da8xx-fb: CCF clock divider handling

Manjunathappa, Prakash (1):
  video: da8xx-fb: fix 24bpp raster configuration

 .../devicetree/bindings/video/fb-da8xx.txt         |  37 ++++
 drivers/video/da8xx-fb.c                           | 217 ++++++++++++++++-----
 2 files changed, 201 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/fb-da8xx.txt

-- 
1.7.12

[PATCH v3 02/12] video: da8xx-fb: fix 24bpp raster configuration

[Afzal Mohammed]

From: "Manjunathappa, Prakash" <prakash.pm@ti.com>

Set only LCD_V2_TFT_24BPP_MODE bit for 24bpp and LCD_V2_TFT_24BPP_UNPACK
bit along with LCD_V2_TFT_24BPP_MODE for 32bpp configuration.

Patch is tested on am335x-evm for 24bpp and da850-evm for 16bpp
configurations.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 35a33ca..7f92f37 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -550,10 +550,10 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
 	case 4:
 	case 16:
 		break;
-	case 24:
-		reg |= LCD_V2_TFT_24BPP_MODE;
 	case 32:
 		reg |= LCD_V2_TFT_24BPP_UNPACK;
+	case 24:
+		reg |= LCD_V2_TFT_24BPP_MODE;
 		break;
 
 	case 8:
-- 
1.7.12

[PATCH v3 06/12] video: da8xx-fb: reorganize panel detection

[Afzal Mohammed]

Move panel detection to a separate function, this helps in readability
as well as makes DT support cleaner.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 42 ++++++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 16 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 3b146bc..b6ea5e9 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1253,6 +1253,27 @@ static struct fb_ops da8xx_fb_ops = {
 	.fb_blank = cfb_blank,
 };
 
+static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
+{
+	struct da8xx_lcdc_platform_data *fb_pdata = dev->dev.platform_data;
+	struct fb_videomode *lcdc_info;
+	int i;
+
+	for (i = 0, lcdc_info = known_lcd_panels;
+		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
+		if (strcmp(fb_pdata->type, lcdc_info->name) = 0)
+			break;
+	}
+
+	if (i = ARRAY_SIZE(known_lcd_panels)) {
+		dev_err(&dev->dev, "no panel found\n");
+		return NULL;
+	}
+	dev_info(&dev->dev, "found %s panel\n", lcdc_info->name);
+
+	return lcdc_info;
+}
+
 static int fb_probe(struct platform_device *device)
 {
 	struct da8xx_lcdc_platform_data *fb_pdata @@ -1262,7 +1283,7 @@ static int fb_probe(struct platform_device *device)
 	struct fb_info *da8xx_fb_info;
 	struct clk *fb_clk = NULL;
 	struct da8xx_fb_par *par;
-	int ret, i;
+	int ret;
 	unsigned long ulcm;
 
 	if (fb_pdata = NULL) {
@@ -1270,6 +1291,10 @@ static int fb_probe(struct platform_device *device)
 		return -ENOENT;
 	}
 
+	lcdc_info = da8xx_fb_get_videomode(device);
+	if (lcdc_info = NULL)
+		return -ENODEV;
+
 	lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0);
 	da8xx_fb_reg_base = devm_request_and_ioremap(&device->dev, lcdc_regs);
 	if (!da8xx_fb_reg_base) {
@@ -1303,21 +1328,6 @@ static int fb_probe(struct platform_device *device)
 		break;
 	}
 
-	for (i = 0, lcdc_info = known_lcd_panels;
-		i < ARRAY_SIZE(known_lcd_panels);
-		i++, lcdc_info++) {
-		if (strcmp(fb_pdata->type, lcdc_info->name) = 0)
-			break;
-	}
-
-	if (i = ARRAY_SIZE(known_lcd_panels)) {
-		dev_err(&device->dev, "GLCD: No valid panel found\n");
-		ret = -ENODEV;
-		goto err_pm_runtime_disable;
-	} else
-		dev_info(&device->dev, "GLCD: Found %s panel\n",
-					fb_pdata->type);
-
 	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
 
 	if (!lcd_cfg) {
-- 
1.7.12

[PATCH v3 07/12] video: da8xx-fb: minimal dt support

[Afzal Mohammed]

Driver is provided a means to have the probe triggered by DT.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 Documentation/devicetree/bindings/video/fb-da8xx.txt | 16 ++++++++++++++++
 drivers/video/da8xx-fb.c                             |  7 +++++++
 2 files changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/fb-da8xx.txt

diff --git a/Documentation/devicetree/bindings/video/fb-da8xx.txt b/Documentation/devicetree/bindings/video/fb-da8xx.txt
new file mode 100644
index 0000000..581e014
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fb-da8xx.txt
@@ -0,0 +1,16 @@
+TI LCD Controller on DA830/DA850/AM335x SoC's
+
+Required properties:
+- compatible:
+	DA830 - "ti,da830-lcdc"
+	AM335x SoC's - "ti,am3352-lcdc", "ti,da830-lcdc"
+- reg: Address range of lcdc register set
+- interrupts: lcdc interrupt
+
+Example:
+
+lcdc@4830e000 {
+	compatible = "ti,am3352-lcdc", "ti,da830-lcdc";
+	reg =  <0x4830e000 0x1000>;
+	interrupts = <36>;
+};
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index b6ea5e9..08ee8eb 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1595,6 +1595,12 @@ static int fb_resume(struct platform_device *dev)
 #define fb_resume NULL
 #endif
 
+static const struct of_device_id da8xx_fb_of_match[] = {
+	{.compatible = "ti,da830-lcdc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
+
 static struct platform_driver da8xx_fb_driver = {
 	.probe = fb_probe,
 	.remove = fb_remove,
@@ -1603,6 +1609,7 @@ static struct platform_driver da8xx_fb_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .owner = THIS_MODULE,
+		   .of_match_table = of_match_ptr(da8xx_fb_of_match),
 		   },
 };
 
-- 
1.7.12

[PATCH v3 11/12] video: da8xx-fb: setup struct lcd_ctrl_config for dt

[Afzal Mohammed]

strcut lcd_ctrl_config information required for driver is currently
obtained via platform data. To handle DT probing, create
lcd_ctrl_config and populate it with default values, these values are
sufficient for the panels so far used with this controller to work.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 1c1a616..5455682 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1254,6 +1254,35 @@ static struct fb_ops da8xx_fb_ops = {
 	.fb_blank = cfb_blank,
 };
 
+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
+{
+	struct lcd_ctrl_config *cfg;
+
+	cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
+	if (!cfg) {
+		dev_err(&dev->dev, "memory allocation failed\n");
+		return NULL;
+	}
+
+	/* default values */
+
+	if (lcd_revision = LCD_VERSION_1)
+		cfg->bpp = 16;
+	else
+		cfg->bpp = 32;
+
+	/*
+	 * For panels so far used with this LCDC, below statement is sufficient.
+	 * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
+	 * with additional/modified values. Those values would have to be then
+	 * obtained from dt(requiring new dt bindings).
+	 */
+
+	cfg->panel_shade = COLOR_ACTIVE;
+
+	return cfg;
+}
+
 static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
 {
 	struct da8xx_lcdc_platform_data *fb_pdata = dev->dev.platform_data;
@@ -1345,7 +1374,10 @@ static int fb_probe(struct platform_device *device)
 		break;
 	}
 
-	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
+	if (device->dev.of_node)
+		lcd_cfg = da8xx_fb_create_cfg(device);
+	else
+		lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
 
 	if (!lcd_cfg) {
 		ret = -EINVAL;
-- 
1.7.12

[PATCH v3 12/12] video: da8xx-fb: CCF clock divider handling

[Afzal Mohammed]

Common clock framework provides a basic clock divider. Make use of it
to handle clock configuration in the LCDC IP, wherever applicable;
out of two platforms having this IP, only am335x is converted to use
CCF, DaVinci is not yet converted. Hence wrap the modification such
that it will come into effect only if CCF is selected, otherwise,
prgram dividers as earlier. Once DaVinci is converted to use CCF,
this ifdef'ery can be removed.

Divider clock instantiated is made as a one that allows the rate
propogation to it's parent, that provides more options w.r.t pixel
clock rates that could be configured.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---

v3: model CCF clock divider with parent propogation if CCF selected
v2: new patch

 drivers/video/da8xx-fb.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 65 insertions(+), 2 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 5455682..3c9db1d 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -36,6 +36,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/lcm.h>
+#include <linux/clk-provider.h>
 #include <video/of_display_timing.h>
 #include <video/da8xx-fb.h>
 #include <asm/div64.h>
@@ -133,6 +134,10 @@
 #define WSI_TIMEOUT	50
 #define PALETTE_SIZE	256
 
+#define	LCD_CLK_SHIFT	8
+#define	LCD_CLK_WIDTH	8
+#define	LCD_CLK_MIN_DIV	2
+
 static void __iomem *da8xx_fb_reg_base;
 static struct resource *lcdc_regs;
 static unsigned int lcd_revision;
@@ -181,6 +186,9 @@ struct da8xx_fb_par {
 	u32 pseudo_palette[16];
 	struct fb_videomode	mode;
 	struct lcd_ctrl_config	cfg;
+#ifdef CONFIG_COMMON_CLK
+	struct clk		*child_clk;
+#endif
 };
 
 static struct fb_var_screeninfo da8xx_fb_var;
@@ -689,6 +697,19 @@ static inline unsigned da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par,
 	return par->lcd_fck_rate / (PICOS2KHZ(pixclock) * 1000);
 }
 
+#ifdef	CONFIG_COMMON_CLK
+static inline unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par,
+					  unsigned pixclock)
+{
+	unsigned long rate;
+
+	rate = PICOS2KHZ(pixclock) * 1000;
+	rate = clk_round_rate(par->child_clk, rate);
+	rate = KHZ2PICOS(rate / 1000);
+
+	return rate;
+}
+#else
 static inline unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par,
 					  unsigned pixclock)
 {
@@ -697,25 +718,49 @@ static inline unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par,
 	div = da8xx_fb_calc_clk_divider(par, pixclock);
 	return KHZ2PICOS(par->lcd_fck_rate / (1000 * div));
 }
+#endif
 
 static inline void da8xx_fb_config_clk_divider(unsigned div)
 {
 	/* Configure the LCD clock divisor. */
 	lcdc_write(LCD_CLK_DIVISOR(div) |
 			(LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
+}
 
+static inline void da8xx_fb_clkc_enable(void)
+{
 	if (lcd_revision = LCD_VERSION_2)
 		lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
 				LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG);
 }
 
-static inline void da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
+#ifdef	CONFIG_COMMON_CLK
+static inline int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
+						    struct fb_videomode *mode)
+{
+	int ret;
+
+	ret = clk_set_rate(par->child_clk, PICOS2KHZ(mode->pixclock) * 1000);
+	if (IS_ERR_VALUE(ret)) {
+		dev_err(par->dev, "unable to setup pixel clock of %u ps",
+			mode->pixclock);
+		return ret;
+	}
+	da8xx_fb_clkc_enable();
+	return 0;
+}
+#else
+static inline int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
 						    struct fb_videomode *mode)
 {
 	unsigned div = da8xx_fb_calc_clk_divider(par, mode->pixclock);
 
 	da8xx_fb_config_clk_divider(div);
+	da8xx_fb_clkc_enable();
+
+	return 0;
 }
+#endif
 
 static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 		struct fb_videomode *panel)
@@ -723,7 +768,9 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
 	u32 bpp;
 	int ret = 0;
 
-	da8xx_fb_calc_config_clk_divider(par, panel);
+	ret = da8xx_fb_calc_config_clk_divider(par, panel);
+	if (IS_ERR_VALUE(ret))
+		return ret;
 
 	if (panel->sync & FB_SYNC_CLK_INVERT)
 		lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) |
@@ -1406,6 +1453,22 @@ static int fb_probe(struct platform_device *device)
 
 	da8xx_fb_lcd_reset();
 
+#ifdef	CONFIG_COMMON_CLK
+	lcdc_write(LCD_RASTER_MODE | LCD_CLK_DIVISOR(0x2), LCD_CTRL_REG);
+	par->child_clk = clk_register_divider(NULL, "da8xx_fb_clk",
+					      __clk_get_name(fb_clk),
+					      CLK_SET_RATE_PARENT,
+					      da8xx_fb_reg_base + LCD_CTRL_REG,
+					      LCD_CLK_SHIFT, LCD_CLK_WIDTH,
+					      LCD_CLK_MIN_DIV,
+					      CLK_DIVIDER_ONE_BASED, NULL);
+	if (IS_ERR(par->child_clk)) {
+		dev_err(&device->dev, "error registering clk\n");
+		ret = -ENODEV;
+		goto err_release_fb;
+	}
+#endif
+
 	/* allocate frame buffer */
 	par->vram_size = lcdc_info->xres * lcdc_info->yres * lcd_cfg->bpp;
 	ulcm = lcm((lcdc_info->xres * lcd_cfg->bpp)/8, PAGE_SIZE);
-- 
1.7.12

[PATCH v3 10/12] video: da8xx-fb: ensure pdata only for non-dt

[Afzal Mohammed]

This driver is DT probe-able, hence ensure presence of platform data
only for non-DT boot.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 0c68712..1c1a616 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1303,7 +1303,7 @@ static int fb_probe(struct platform_device *device)
 	int ret;
 	unsigned long ulcm;
 
-	if (fb_pdata = NULL) {
+	if (fb_pdata = NULL && !device->dev.of_node) {
 		dev_err(&device->dev, "Can not get platform data\n");
 		return -ENOENT;
 	}
-- 
1.7.12

[PATCH v3 09/12] video: da8xx-fb: obtain fb_videomode info from dt

[Afzal Mohammed]

Obtain fb_videomode details for the connected lcd panel using the
display timing details present in DT.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 .../devicetree/bindings/video/fb-da8xx.txt          | 21 +++++++++++++++++++++
 drivers/video/da8xx-fb.c                            | 17 +++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/fb-da8xx.txt b/Documentation/devicetree/bindings/video/fb-da8xx.txt
index 581e014..0741f78 100644
--- a/Documentation/devicetree/bindings/video/fb-da8xx.txt
+++ b/Documentation/devicetree/bindings/video/fb-da8xx.txt
@@ -6,6 +6,12 @@ Required properties:
 	AM335x SoC's - "ti,am3352-lcdc", "ti,da830-lcdc"
 - reg: Address range of lcdc register set
 - interrupts: lcdc interrupt
+- display-timings: typical videomode of lcd panel, represented as child.
+  Refer Documentation/devicetree/bindings/video/display-timing.txt for
+  display timing binding details. If multiple videomodes are mentioned
+  in display timings node, typical videomode has to be mentioned as the
+  native mode or it has to be first child (driver cares only for native
+  videomode).
 
 Example:
 
@@ -13,4 +19,19 @@ lcdc@4830e000 {
 	compatible = "ti,am3352-lcdc", "ti,da830-lcdc";
 	reg =  <0x4830e000 0x1000>;
 	interrupts = <36>;
+	display-timings {
+		800x480p62 {
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <39>;
+			hback-porch = <39>;
+			hsync-len = <47>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+		};
+	};
 };
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 0beed20..0c68712 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -36,6 +36,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/lcm.h>
+#include <video/of_display_timing.h>
 #include <video/da8xx-fb.h>
 #include <asm/div64.h>
 
@@ -1257,8 +1258,24 @@ static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
 {
 	struct da8xx_lcdc_platform_data *fb_pdata = dev->dev.platform_data;
 	struct fb_videomode *lcdc_info;
+	struct device_node *np = dev->dev.of_node;
 	int i;
 
+	if (np) {
+		lcdc_info = devm_kzalloc(&dev->dev,
+					 sizeof(struct fb_videomode),
+					 GFP_KERNEL);
+		if (!lcdc_info) {
+			dev_err(&dev->dev, "memory allocation failed\n");
+			return NULL;
+		}
+		if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
+			dev_err(&dev->dev, "timings not available in DT\n");
+			return NULL;
+		}
+		return lcdc_info;
+	}
+
 	for (i = 0, lcdc_info = known_lcd_panels;
 		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
 		if (strcmp(fb_pdata->type, lcdc_info->name) = 0)
-- 
1.7.12

[PATCH v3 08/12] video: da8xx-fb: invoke platform callback safely

[Afzal Mohammed]

Ensure that platform data is present before checking whether platform
callback is present (the one used to control backlight). So far this
was not an issue as driver was purely non-DT triggered, but now DT
support has been added.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 08ee8eb..0beed20 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1347,7 +1347,7 @@ static int fb_probe(struct platform_device *device)
 	par->dev = &device->dev;
 	par->lcdc_clk = fb_clk;
 	par->lcd_fck_rate = clk_get_rate(fb_clk);
-	if (fb_pdata->panel_power_ctrl) {
+	if (fb_pdata && fb_pdata->panel_power_ctrl) {
 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
 		par->panel_power_ctrl(1);
 	}
-- 
1.7.12

[PATCH v3 05/12] video: da8xx-fb: ensure non-null cfg in pdata

[Afzal Mohammed]

Ensure that platform data contains pointer for lcd_ctrl_config.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 7a32e83..3b146bc 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1320,6 +1320,11 @@ static int fb_probe(struct platform_device *device)
 
 	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
 
+	if (!lcd_cfg) {
+		ret = -EINVAL;
+		goto err_pm_runtime_disable;
+	}
+
 	da8xx_fb_info = framebuffer_alloc(sizeof(struct da8xx_fb_par),
 					&device->dev);
 	if (!da8xx_fb_info) {
-- 
1.7.12

[PATCH v3 04/12] video: da8xx-fb: use devres

[Afzal Mohammed]

Replace existing resource handling in the driver with managed device
resource.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 35 ++++++-----------------------------
 1 file changed, 6 insertions(+), 29 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index ca69e01..7a32e83 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1036,12 +1036,9 @@ static int fb_remove(struct platform_device *dev)
 				  par->p_palette_base);
 		dma_free_coherent(NULL, par->vram_size, par->vram_virt,
 				  par->vram_phys);
-		free_irq(par->irq, par);
 		pm_runtime_put_sync(&dev->dev);
 		pm_runtime_disable(&dev->dev);
 		framebuffer_release(info);
-		iounmap(da8xx_fb_reg_base);
-		release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
 
 	}
 	return 0;
@@ -1265,7 +1262,6 @@ static int fb_probe(struct platform_device *device)
 	struct fb_info *da8xx_fb_info;
 	struct clk *fb_clk = NULL;
 	struct da8xx_fb_par *par;
-	resource_size_t len;
 	int ret, i;
 	unsigned long ulcm;
 
@@ -1275,29 +1271,16 @@ static int fb_probe(struct platform_device *device)
 	}
 
 	lcdc_regs = platform_get_resource(device, IORESOURCE_MEM, 0);
-	if (!lcdc_regs) {
-		dev_err(&device->dev,
-			"Can not get memory resource for LCD controller\n");
-		return -ENOENT;
-	}
-
-	len = resource_size(lcdc_regs);
-
-	lcdc_regs = request_mem_region(lcdc_regs->start, len, lcdc_regs->name);
-	if (!lcdc_regs)
-		return -EBUSY;
-
-	da8xx_fb_reg_base = ioremap(lcdc_regs->start, len);
+	da8xx_fb_reg_base = devm_request_and_ioremap(&device->dev, lcdc_regs);
 	if (!da8xx_fb_reg_base) {
-		ret = -EBUSY;
-		goto err_request_mem;
+		dev_err(&device->dev, "memory resource setup failed\n");
+		return -EADDRNOTAVAIL;
 	}
 
-	fb_clk = clk_get(&device->dev, "fck");
+	fb_clk = devm_clk_get(&device->dev, "fck");
 	if (IS_ERR(fb_clk)) {
 		dev_err(&device->dev, "Can not get device clock\n");
-		ret = -ENODEV;
-		goto err_ioremap;
+		return -ENODEV;
 	}
 
 	pm_runtime_enable(&device->dev);
@@ -1458,7 +1441,7 @@ static int fb_probe(struct platform_device *device)
 		lcdc_irq_handler = lcdc_irq_handler_rev02;
 	}
 
-	ret = request_irq(par->irq, lcdc_irq_handler, 0,
+	ret = devm_request_irq(&device->dev, par->irq, lcdc_irq_handler, 0,
 			DRIVER_NAME, par);
 	if (ret)
 		goto irq_freq;
@@ -1488,12 +1471,6 @@ err_pm_runtime_disable:
 	pm_runtime_put_sync(&device->dev);
 	pm_runtime_disable(&device->dev);
 
-err_ioremap:
-	iounmap(da8xx_fb_reg_base);
-
-err_request_mem:
-	release_mem_region(lcdc_regs->start, len);
-
 	return ret;
 }
 
-- 
1.7.12

[PATCH v3 01/12] video: da8xx-fb: make io operations safe

[Afzal Mohammed]

Replace __raw_readl/__raw_writel with readl/writel; this driver is
reused on ARMv7 (AM335x SoC).

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---

v2: new patch

 drivers/video/da8xx-fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 720604c..35a33ca 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -141,12 +141,12 @@ static int frame_done_flag;
 
 static inline unsigned int lcdc_read(unsigned int addr)
 {
-	return (unsigned int)__raw_readl(da8xx_fb_reg_base + (addr));
+	return (unsigned int)readl(da8xx_fb_reg_base + (addr));
 }
 
 static inline void lcdc_write(unsigned int val, unsigned int addr)
 {
-	__raw_writel(val, da8xx_fb_reg_base + (addr));
+	writel(val, da8xx_fb_reg_base + (addr));
 }
 
 struct da8xx_fb_par {
-- 
1.7.12

[PATCH v3 03/12] video: da8xx-fb: enable sync lost intr for v2 ip

[Afzal Mohammed]

interrupt handler is checking for sync lost interrupt, but it was not
enabled, enable it.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
---
 drivers/video/da8xx-fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 7f92f37..ca69e01 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -318,7 +318,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
 			reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
 				LCD_V2_END_OF_FRAME0_INT_ENA |
 				LCD_V2_END_OF_FRAME1_INT_ENA |
-				LCD_FRAME_DONE;
+				LCD_FRAME_DONE | LCD_SYNC_LOST;
 			lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
 		}
 		reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
-- 
1.7.12

Re: [PATCH v3 00/12] video: da8xx-fb: am335x DT support

[Koen Kooi]

Op 22 jan. 2013, om 17:51 heeft Afzal Mohammed <afzal@ti.com> het volgende geschreven:

> Hi,
> 
> This series adds DT support to da8xx-fb driver (device found on
> DaVinci and AM335x SoC's). It does certain cleanup's in the process.
> 
> This series as compared to previous version handles configuration of
> the LCDC clock rate by modelling as a clock divider of CCF. This would
> take effect only if CCF is selected, if not, no change to  existing
> method.
> 
> This makes use of Steffen Trumtrar's v16 of display timing DT support.

Wouldn't it be better to delete da8xx-fb.* and switch to Rob Clarks DRM based driver for this IP block?

regards,

Koen

Re: [PATCH v3 00/12] video: da8xx-fb: am335x DT support

[Rob Clark]

On Tue, Jan 22, 2013 at 11:03 AM, Koen Kooi <koen@dominion.thruhere.net> wrote:
>
> Op 22 jan. 2013, om 17:51 heeft Afzal Mohammed <afzal@ti.com> het volgende geschreven:
>
>> Hi,
>>
>> This series adds DT support to da8xx-fb driver (device found on
>> DaVinci and AM335x SoC's). It does certain cleanup's in the process.
>>
>> This series as compared to previous version handles configuration of
>> the LCDC clock rate by modelling as a clock divider of CCF. This would
>> take effect only if CCF is selected, if not, no change to  existing
>> method.
>>
>> This makes use of Steffen Trumtrar's v16 of display timing DT support.
>
> Wouldn't it be better to delete da8xx-fb.* and switch to Rob Clarks DRM based driver for this IP block?

we probably can't delete da8xx-fb, but I think it would be ok to only
use it for legacy platforms not yet ported to DT.

BR,
-R

> regards,
>
> Koen--
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v3 00/12] video: da8xx-fb: am335x DT support

[Mohammed, Afzal]

SGksDQoNCk9uIFdlZCwgSmFuIDIzLCAyMDEzIGF0IDAwOjE1OjA5LCBSb2IgQ2xhcmsgd3JvdGU6
DQoNCj4gPiBXb3VsZG4ndCBpdCBiZSBiZXR0ZXIgdG8gZGVsZXRlIGRhOHh4LWZiLiogYW5kIHN3
aXRjaCB0byBSb2IgQ2xhcmtzIERSTSBiYXNlZCBkcml2ZXIgZm9yIHRoaXMgSVAgYmxvY2s/DQoN
Cj4gd2UgcHJvYmFibHkgY2FuJ3QgZGVsZXRlIGRhOHh4LWZiLCBidXQgSSB0aGluayBpdCB3b3Vs
ZCBiZSBvayB0byBvbmx5DQo+IHVzZSBpdCBmb3IgbGVnYWN5IHBsYXRmb3JtcyBub3QgeWV0IHBv
cnRlZCB0byBEVC4NCg0KV2UgY2FuJ3QgcmVtb3ZlIGRhOHh4LWZiIGFzIERBODMwIGlzIGEgbm9u
LURUIG9uZSBhbmQgREE4NTAgaXMgb25seSBnYWluaW5nDQpEVCBzdXBwb3J0Lg0KDQpBbmQgUm9i
LA0KDQpJIGFtIG5vdCBmYW1pbGlhciB3aXRoIGRybSBzZXR1cCwgd291bGQgYWxsIHRoZSB1c2Vy
IHNwYWNlIGZyYW1lIGJ1ZmZlciBiYXNlZA0KYXBwbGljYXRpb25zIHdvcmsgYXMgaXMgd2l0aCBk
cm0gZHJpdmVyPw0KDQpSZWdhcmRzDQpBZnphbA0K

Re: [PATCH v3 00/12] video: da8xx-fb: am335x DT support

[Rob Clark]

On Wed, Jan 23, 2013 at 6:27 AM, Mohammed, Afzal <afzal@ti.com> wrote:
> Hi,
>
> On Wed, Jan 23, 2013 at 00:15:09, Rob Clark wrote:
>
>> > Wouldn't it be better to delete da8xx-fb.* and switch to Rob Clarks DRM based driver for this IP block?
>
>> we probably can't delete da8xx-fb, but I think it would be ok to only
>> use it for legacy platforms not yet ported to DT.
>
> We can't remove da8xx-fb as DA830 is a non-DT one and DA850 is only gaining
> DT support.
>
> And Rob,
>
> I am not familiar with drm setup, would all the user space frame buffer based
> applications work as is with drm driver?

drm does provide a legacy fbdev interface (needed for fbcon, for
example).  I don't think da8xx-fb has any custom ioctls, so probably
what drm provides should be enough.

BR,
-R

> Regards
> Afzal