From: Thomas Zimmermann <tzimmermann@suse.de>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: daniel@ffwll.ch, javierm@redhat.com, deller@gmx.de,
geert+renesas@glider.be, lee@kernel.org,
daniel.thompson@linaro.org, jingoohan1@gmail.com,
linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-sh@vger.kernel.org, linux-omap@vger.kernel.org,
linux-staging@lists.linux.dev
Subject: Re: [PATCH 30/30] fbdev: Make support for userspace interfaces configurable
Date: Mon, 12 Jun 2023 08:47:54 +0200 [thread overview]
Message-ID: <fd02bf75-5653-9f82-6d4c-6cdf98dbf7af@suse.de> (raw)
In-Reply-To: <20230611163716.GA1139759@ravnborg.org>
[-- Attachment #1.1: Type: text/plain, Size: 8660 bytes --]
Hi Sam
Am 11.06.23 um 18:37 schrieb Sam Ravnborg:
> Hi Thomas,
>
> On Mon, Jun 05, 2023 at 04:48:12PM +0200, Thomas Zimmermann wrote:
>> Add Kconfig option CONFIG_FB_DEVICE and make the virtual fbdev
>> device optional. If the new option has not been selected, fbdev
>> does not create a files in devfs or sysfs.
> s/ a//
>>
>> Most modern Linux systems run a DRM-based graphics stack that uses
>> the kernel's framebuffer console, but has otherwise deprecated fbdev
>> support. Yet fbdev userspace interfaces are still present.
>>
>> The option makes it possible to use the fbdev subsystem as console
>> implementation without support for userspace. This closes potential
>> entry points to manipulate kernel or I/O memory via framebuffers. It
>> also prevents the execution of driver code via ioctl or sysfs, both
>> of which might allow malicious software to exploit bugs in the fbdev
>> code.
>>
>> A small number of fbdev drivers require struct fbinfo.dev to be
>> initialized, usually for the support of sysfs interface. Make these
>> drivers depend on FB_DEVICE. They can later be fixed if necessary.
> Should that be a TODO in gpu/todo.rst?
> Otherwise the amount of people knowing about this
> is very close to 1.
Ha! Yes, I'll add a TODO item. Good idea.
Best regards
Thomas
> As an alternative add a TODO to each Kconfig file.
>
>>
>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>> ---
>> drivers/staging/fbtft/Kconfig | 1 +
>> drivers/video/fbdev/Kconfig | 12 +++++++++
>> drivers/video/fbdev/core/Makefile | 7 +++---
>> drivers/video/fbdev/core/fb_internal.h | 32 ++++++++++++++++++++++++
>> drivers/video/fbdev/omap2/omapfb/Kconfig | 2 +-
>> include/linux/fb.h | 2 ++
>> 6 files changed, 52 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
>> index 4d29e8c1014e..5dda3c65a38e 100644
>> --- a/drivers/staging/fbtft/Kconfig
>> +++ b/drivers/staging/fbtft/Kconfig
>> @@ -2,6 +2,7 @@
>> menuconfig FB_TFT
>> tristate "Support for small TFT LCD display modules"
>> depends on FB && SPI
>> + depends on FB_DEVICE
>> depends on GPIOLIB || COMPILE_TEST
>> select FB_SYS_FILLRECT
>> select FB_SYS_COPYAREA
>> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
>> index 6df9bd09454a..48d9a14f889c 100644
>> --- a/drivers/video/fbdev/Kconfig
>> +++ b/drivers/video/fbdev/Kconfig
>> @@ -57,6 +57,15 @@ config FIRMWARE_EDID
>> combination with certain motherboards and monitors are known to
>> suffer from this problem.
>>
>> +config FB_DEVICE
>> + bool "Provide legacy /dev/fb* device"
>> + depends on FB
>> + help
>> + Say Y here if you want the legacy /dev/fb* device file. It's
>> + only required if you have userspace programs that depend on
>> + fbdev for graphics output. This does not effect the framebuffer
>> + console.
> tabs to spaces to indent the above correct.
>
>> +
>> config FB_DDC
>> tristate
>> depends on FB
>> @@ -1545,6 +1554,7 @@ config FB_3DFX_I2C
>> config FB_VOODOO1
>> tristate "3Dfx Voodoo Graphics (sst1) support"
>> depends on FB && PCI
>> + depends on FB_DEVICE
>> select FB_CFB_FILLRECT
>> select FB_CFB_COPYAREA
>> select FB_CFB_IMAGEBLIT
>> @@ -1862,6 +1872,7 @@ config FB_SH_MOBILE_LCDC
>> tristate "SuperH Mobile LCDC framebuffer support"
>> depends on FB && HAVE_CLK && HAS_IOMEM
>> depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
>> + depends on FB_DEVICE
>> select FB_SYS_FILLRECT
>> select FB_SYS_COPYAREA
>> select FB_SYS_IMAGEBLIT
>> @@ -1930,6 +1941,7 @@ config FB_SMSCUFX
>> config FB_UDL
>> tristate "Displaylink USB Framebuffer support"
>> depends on FB && USB
>> + depends on FB_DEVICE
>> select FB_MODE_HELPERS
>> select FB_SYS_FILLRECT
>> select FB_SYS_COPYAREA
>> diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
>> index 125d24f50c36..d5e8772620f8 100644
>> --- a/drivers/video/fbdev/core/Makefile
>> +++ b/drivers/video/fbdev/core/Makefile
>> @@ -2,12 +2,13 @@
>> obj-$(CONFIG_FB_NOTIFY) += fb_notify.o
>> obj-$(CONFIG_FB) += fb.o
>> fb-y := fb_backlight.o \
>> - fb_devfs.o \
>> fb_info.o \
>> - fb_procfs.o \
>> - fbmem.o fbmon.o fbcmap.o fbsysfs.o \
>> + fbmem.o fbmon.o fbcmap.o \
>> modedb.o fbcvt.o fb_cmdline.o fb_io_fops.o
>> fb-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
>> +fb-$(CONFIG_FB_DEVICE) += fb_devfs.o \
>> + fb_procfs.o \
>> + fbsysfs.o
> Maybe change this to one line to avoid '\'?
>
>>
>> ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE),y)
>> fb-y += fbcon.o bitblit.o softcursor.o
>> diff --git a/drivers/video/fbdev/core/fb_internal.h b/drivers/video/fbdev/core/fb_internal.h
>> index 0b43c0cd5096..b8a28466db79 100644
>> --- a/drivers/video/fbdev/core/fb_internal.h
>> +++ b/drivers/video/fbdev/core/fb_internal.h
>> @@ -3,12 +3,22 @@
>> #ifndef _FB_INTERNAL_H
>> #define _FB_INTERNAL_H
>>
>> +#include <linux/device.h>
>> #include <linux/fb.h>
>> #include <linux/mutex.h>
>>
>> /* fb_devfs.c */
>> +#if defined(CONFIG_FB_DEVICE)
>> int fb_register_chrdev(void);
>> void fb_unregister_chrdev(void);
>> +#else
>> +static inline int fb_register_chrdev(void)
>> +{
>> + return 0;
>> +}
>> +static inline void fb_unregister_chrdev(void)
>> +{ }
>> +#endif
>>
>> /* fbmem.c */
>> extern struct class *fb_class;
>> @@ -19,11 +29,33 @@ struct fb_info *get_fb_info(unsigned int idx);
>> void put_fb_info(struct fb_info *fb_info);
>>
>> /* fb_procfs.c */
>> +#if defined(CONFIG_FB_DEVICE)
>> int fb_init_procfs(void);
>> void fb_cleanup_procfs(void);
>> +#else
>> +static inline int fb_init_procfs(void)
>> +{
>> + return 0;
>> +}
>> +static inline void fb_cleanup_procfs(void)
>> +{ }
>> +#endif
>>
>> /* fbsysfs.c */
>> +#if defined(CONFIG_FB_DEVICE)
>> int fb_device_create(struct fb_info *fb_info);
>> void fb_device_destroy(struct fb_info *fb_info);
>> +#else
>> +static inline int fb_device_create(struct fb_info *fb_info)
>> +{
>> + get_device(fb_info->device); // as in device_add()
>> +
>> + return 0;
>> +}
>> +static inline void fb_device_destroy(struct fb_info *fb_info)
>> +{
>> + put_device(fb_info->device); // as in device_del()
>> +}
>> +#endif
> I do not see why fb_device_{create,destroy} needs to call
> {get,put}_device - and it is not explained.
> A short explanation in the commit maybe?
>
> With my comments addressed:
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
>
> Note: I do not engage in the thread about the best Kconfig
> solution - I trust the involved people will find a good solution.
>
> Sam
>
>>
>> #endif
>> diff --git a/drivers/video/fbdev/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
>> index 69f9cb03507e..21069fdb7cc2 100644
>> --- a/drivers/video/fbdev/omap2/omapfb/Kconfig
>> +++ b/drivers/video/fbdev/omap2/omapfb/Kconfig
>> @@ -5,9 +5,9 @@ config OMAP2_VRFB
>> menuconfig FB_OMAP2
>> tristate "OMAP2+ frame buffer support"
>> depends on FB
>> + depends on FB_DEVICE
>> depends on DRM_OMAP = n
>> depends on GPIOLIB
>> -
>> select FB_OMAP2_DSS
>> select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
>> select FB_CFB_FILLRECT
>> diff --git a/include/linux/fb.h b/include/linux/fb.h
>> index 541a0e3ce21f..40ed1028160c 100644
>> --- a/include/linux/fb.h
>> +++ b/include/linux/fb.h
>> @@ -481,7 +481,9 @@ struct fb_info {
>>
>> const struct fb_ops *fbops;
>> struct device *device; /* This is the parent */
>> +#if defined(CONFIG_FB_DEVICE)
>> struct device *dev; /* This is this fb device */
>> +#endif
>> int class_flag; /* private sysfs flags */
>> #ifdef CONFIG_FB_TILEBLITTING
>> struct fb_tile_ops *tileops; /* Tile Blitting */
>> --
>> 2.40.1
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
next prev parent reply other threads:[~2023-06-12 6:58 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 14:47 [PATCH 00/30] fbdev: Make userspace interfaces optional Thomas Zimmermann
2023-06-05 14:47 ` [PATCH 01/30] backlight/bd6107: Compare against struct fb_info.device Thomas Zimmermann
2023-06-07 7:30 ` Javier Martinez Canillas
2023-06-07 7:34 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 02/30] backlight/gpio_backlight: " Thomas Zimmermann
2023-06-05 20:19 ` Ruhl, Michael J
2023-06-05 20:23 ` Sam Ravnborg
2023-06-05 20:41 ` Ruhl, Michael J
2023-06-06 7:24 ` Thomas Zimmermann
2023-06-06 7:49 ` Dan Carpenter
2023-06-06 8:05 ` Thomas Zimmermann
2023-06-05 14:47 ` [PATCH 03/30] backlight/lv5207lp: " Thomas Zimmermann
2023-06-07 7:35 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 04/30] fbdev/atyfb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 7:36 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 05/30] fbdev/atyfb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 7:41 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 06/30] fbdev/aty128fb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 7:42 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 07/30] fbdev/aty128fb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 7:55 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 08/30] fbdev/broadsheetfb: Call device_remove_file() with hardware device Thomas Zimmermann
2023-06-07 7:55 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 09/30] fbdev/ep93xx-fb: Alloc DMA memory from " Thomas Zimmermann
2023-06-07 8:47 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 10/30] fbdev/ep93xx-fb: Output messages with fb_info() and fb_err() Thomas Zimmermann
2023-06-07 8:59 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 11/30] fbdev/ep93xx-fb: Do not assign to struct fb_info.dev Thomas Zimmermann
2023-06-06 5:26 ` Dan Carpenter
2023-06-07 9:00 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 12/30] fbdev/mb862xxfb: Output messages with fb_dbg() and fb_err() Thomas Zimmermann
2023-06-07 9:00 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 13/30] fbdev/metronomefb: Use hardware device for dev_err() Thomas Zimmermann
2023-06-07 9:01 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 14/30] fbdev/nvidiafb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 9:02 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 15/30] fbdev/nvidiafb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 9:02 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 16/30] fbdev/pxa168fb: Do not assign to struct fb_info.dev Thomas Zimmermann
2023-06-07 9:09 ` Javier Martinez Canillas
2023-06-05 14:47 ` [PATCH 17/30] fbdev/radeonfb: Reorder backlight and framebuffer cleanup Thomas Zimmermann
2023-06-07 9:09 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 18/30] fbdev/radeonfb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-06 5:28 ` Dan Carpenter
2023-06-06 7:30 ` Thomas Zimmermann
2023-06-07 9:10 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 19/30] fbdev/rivafb: Reorder backlight and framebuffer init/cleanup Thomas Zimmermann
2023-06-07 9:11 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 20/30] fbdev/rivafb: Use hardware device as backlight parent Thomas Zimmermann
2023-06-07 9:11 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 21/30] fbdev/sm501fb: Output message with fb_err() Thomas Zimmermann
2023-06-07 9:12 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 22/30] fbdev/smscufx: Detect registered fb_info from refcount Thomas Zimmermann
2023-06-07 22:22 ` Javier Martinez Canillas
2023-06-12 10:19 ` Thomas Zimmermann
2023-06-12 10:40 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 23/30] fbdev/tdfxfb: Set i2c adapter parent to hardware device Thomas Zimmermann
2023-06-07 22:23 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 24/30] fbdev/core: Pass Linux device to pm_vt_switch_*() functions Thomas Zimmermann
2023-06-07 19:25 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 25/30] fbdev/core: Move framebuffer and backlight helpers into separate files Thomas Zimmermann
2023-06-07 19:38 ` Sam Ravnborg
2023-06-09 7:19 ` Thomas Zimmermann
2023-06-05 14:48 ` [PATCH 26/30] fbdev/core: Add fb_device_{create,destroy}() Thomas Zimmermann
2023-06-07 19:45 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 27/30] fbdev/core: Move procfs code to separate file Thomas Zimmermann
2023-06-07 20:33 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 28/30] fbdev/core: Move file-I/O code into " Thomas Zimmermann
2023-06-05 21:35 ` kernel test robot
2023-06-07 20:48 ` Sam Ravnborg
2023-06-12 10:35 ` Thomas Zimmermann
2023-06-07 22:28 ` Javier Martinez Canillas
2023-06-05 14:48 ` [PATCH 29/30] fbdev/core: Rework fb init code Thomas Zimmermann
2023-06-07 20:51 ` Sam Ravnborg
2023-06-05 14:48 ` [PATCH 30/30] fbdev: Make support for userspace interfaces configurable Thomas Zimmermann
2023-06-05 15:03 ` Greg KH
2023-06-05 21:45 ` kernel test robot
2023-06-07 8:48 ` Geert Uytterhoeven
2023-06-07 15:15 ` Thomas Zimmermann
2023-06-07 15:24 ` Geert Uytterhoeven
2023-06-07 23:07 ` Javier Martinez Canillas
2023-06-09 7:09 ` Thomas Zimmermann
2023-06-09 7:29 ` Geert Uytterhoeven
2023-06-09 8:00 ` Thomas Zimmermann
2023-06-09 9:14 ` Geert Uytterhoeven
2023-06-09 11:04 ` Thomas Zimmermann
2023-06-09 11:22 ` Geert Uytterhoeven
2023-06-09 9:59 ` Javier Martinez Canillas
2023-06-09 10:10 ` Geert Uytterhoeven
2023-06-09 10:24 ` Javier Martinez Canillas
2023-06-09 11:27 ` Javier Martinez Canillas
2023-06-11 16:37 ` Sam Ravnborg
2023-06-12 6:47 ` Thomas Zimmermann [this message]
2023-06-12 7:00 ` Thomas Zimmermann
2023-06-07 8:35 ` [PATCH 00/30] fbdev: Make userspace interfaces optional Geert Uytterhoeven
2023-06-12 10:46 ` Thomas Zimmermann
[not found] ` <16a8f34a-d4f9-2e1d-02cf-e4c53f89c006@web.de>
2023-06-07 12:21 ` Thomas Zimmermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fd02bf75-5653-9f82-6d4c-6cdf98dbf7af@suse.de \
--to=tzimmermann@suse.de \
--cc=daniel.thompson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=javierm@redhat.com \
--cc=jingoohan1@gmail.com \
--cc=lee@kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).