* linux-next: build warning after merge of the fbdev tree
From: Stephen Rothwell @ 2011-12-20 5:32 UTC (permalink / raw)
To: Florian Tobias Schandinat, linux-fbdev
Cc: linux-next, linux-kernel, Laurent Pinchart
[-- Attachment #1: Type: text/plain, Size: 1290 bytes --]
Hi all,
After merging the fbdev tree, today's linux-next build (powerpc ppc64_defconfig)
produced this warning:
drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around scalar initializer [enabled by default]
drivers/video/matrox/matroxfb_base.c:150:2: warning: (near initialization for 'vesafb_defined.colorspace') [enabled by default]
drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements in scalar initializer [enabled by default]
drivers/video/matrox/matroxfb_base.c:150:2: warning: (near initialization for 'vesafb_defined.colorspace') [enabled by default]
drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around scalar initializer [enabled by default]
drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near initialization for 'matroxfb_dh_defined.colorspace') [enabled by default]
drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements in scalar initializer [enabled by default]
drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near initialization for 'matroxfb_dh_defined.colorspace') [enabled by default]
Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
configuration API").
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* [PATCH] video: backlight: support MIPI DSI based s6e8ax0 amoled panel
From: Donghwa Lee @ 2011-12-20 8:00 UTC (permalink / raw)
To: linux-arm-kernel
This patch is amoled panel driver based MIPI DSI interface.
S6E8AX0 means it may includes many other ldi controllers, for example,
S6E8AA0, S6E8AB0, and so on.
It can be modified depending on each panel properites.
This patch is based on Samsung Soc MIPI DSI Driver.
Please refer to the "[PATCH v3] video: support MIPI-DSI controller driver".
http://marc.info/?l=linux-fbdev&m\x132435297125837&w=2
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/s6e8ax0.c | 801 +++++++++++++++++++++++++++++++
drivers/video/backlight/s6e8ax0.h | 26 +
drivers/video/backlight/s6e8ax0_gamma.h | 217 +++++++++
5 files changed, 1052 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/backlight/s6e8ax0.c
create mode 100644 drivers/video/backlight/s6e8ax0.h
create mode 100644 drivers/video/backlight/s6e8ax0_gamma.h
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 278aeaa..478fc4a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -125,6 +125,13 @@ config LCD_AMS369FG06
If you have an AMS369FG06 AMOLED Panel, say Y to enable its
LCD control driver.
+config LCD_S6E8AX0
+ tristate "S6E8AX0 MIPI AMOLED LCD Driver"
+ depends on S5P_MIPI_DSI && BACKLIGHT_CLASS_DEVICE
+ default n
+ help
+ If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
+ LCD control driver.
endif # LCD_CLASS_DEVICE
#
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fdd1fc4..6adba58 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_LCD_LD9040) += ld9040.o
obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
+obj-$(CONFIG_LCD_S6E8AX0) += s6e8ax0.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
diff --git a/drivers/video/backlight/s6e8ax0.c b/drivers/video/backlight/s6e8ax0.c
new file mode 100644
index 0000000..2fb303e
--- /dev/null
+++ b/drivers/video/backlight/s6e8ax0.c
@@ -0,0 +1,801 @@
+/* linux/drivers/video/s6e8ax0.c
+ *
+ * MIPI-DSI based s6e8ax0 AMOLED lcd 4.65 inch panel driver.
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mipi_dsim.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include "s6e8ax0_gamma.h"
+
+#define LDI_MTP_LENGTH 24
+#define DSIM_PM_STABLE_TIME (10)
+#define MIN_BRIGHTNESS (0)
+#define MAX_BRIGHTNESS (24)
+
+#define POWER_IS_ON(pwr) ((pwr) = FB_BLANK_UNBLANK)
+#define POWER_IS_OFF(pwr) ((pwr) = FB_BLANK_POWERDOWN)
+#define POWER_IS_NRM(pwr) ((pwr) = FB_BLANK_NORMAL)
+
+#define lcd_to_master(a) (a->dsim_dev->master)
+#define lcd_to_master_ops(a) ((lcd_to_master(a))->master_ops)
+
+enum {
+ DSIM_NONE_STATE = 0,
+ DSIM_RESUME_COMPLETE = 1,
+ DSIM_FRAME_DONE = 2,
+};
+
+struct s6e8ax0 {
+ struct device *dev;
+ unsigned int power;
+ unsigned int id;
+ unsigned int current_brightness;
+ unsigned int updated;
+ unsigned int gamma;
+ unsigned int resume_complete;
+ unsigned int acl_enable;
+ unsigned int cur_acl;
+
+ struct lcd_device *ld;
+ struct backlight_device *bd;
+
+ struct mipi_dsim_lcd_device *dsim_dev;
+ struct lcd_platform_data *ddi_pd;
+ struct mutex lock;
+ bool enabled;
+};
+
+
+static struct regulator_bulk_data supplies[] = {
+ { .supply = "vdd3", },
+ { .supply = "vci", },
+};
+
+static void s6e8ax0_regulator_enable(struct s6e8ax0 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+
+ pd = lcd->ddi_pd;
+ mutex_lock(&lcd->lock);
+ if (!lcd->enabled) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+ if (ret)
+ goto out;
+
+ lcd->enabled = true;
+ }
+ mdelay(pd->power_on_delay);
+out:
+ mutex_unlock(&lcd->lock);
+}
+
+static void s6e8ax0_regulator_disable(struct s6e8ax0 *lcd)
+{
+ int ret = 0;
+
+ mutex_lock(&lcd->lock);
+ if (lcd->enabled) {
+ ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+ if (ret)
+ goto out;
+
+ lcd->enabled = false;
+ }
+out:
+ mutex_unlock(&lcd->lock);
+}
+
+static void s6e8ax0_panel_cond(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+ unsigned char data_to_send[] = {
+ 0xf8, 0x3d, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c,
+ 0x7d, 0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20,
+ 0x04, 0x08, 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08,
+ 0x23, 0x23, 0xc0, 0xc8, 0x08, 0x48, 0xc1, 0x00, 0xc1,
+ 0xff, 0xff, 0xc8
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_cond(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf2, 0x80, 0x03, 0x0d
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+/* Gamma 2.2 Setting (200cd, 7500K, 10MPCD) */
+static void s6e8ax0_gamma_cond(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned int gamma = lcd->bd->props.brightness;
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ s6e8ax0_22_gamma_table[gamma], GAMMA_TABLE_COUNT);
+}
+
+static void s6e8ax0_gamma_update(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf7, 0x03
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send,
+ ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond1(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xd1, 0xfe, 0x80, 0x00, 0x01, 0x0b, 0x00, 0x00, 0x40,
+ 0x0d, 0x00, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond2(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb6, 0x0c, 0x02, 0x03, 0x32, 0xff, 0x44, 0x44, 0xc0,
+ 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond3(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe1, 0x10, 0x1c, 0x17, 0x08, 0x1d
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond4(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe2, 0xed, 0x07, 0xc3, 0x13, 0x0d, 0x03
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond5(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf4, 0xcf, 0x0a, 0x12, 0x10, 0x19, 0x33, 0x02
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+static void s6e8ax0_etc_cond6(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe3, 0x40
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond7(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe4, 0x00, 0x00, 0x14, 0x80, 0x00, 0x00, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_power_ctrl(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf4, 0x0b, 0x0a, 0x06, 0x0b, 0x33, 0x02
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_source_ctrl(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf6, 0x04, 0x02
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_elvss_set(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb1, 0x04, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_elvss_nvm_set(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xd9, 0x5c, 0x20, 0x0c, 0x0f, 0x41, 0x00, 0x10, 0x11,
+ 0x12, 0xd1, 0x00, 0x00, 0x00, 0x00, 0x80, 0xcb, 0xed,
+ 0x64, 0xaf
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_dynamic_elvss_ctrl1(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb1, 0x04, 0x90
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_dynamic_elvss_ctrl2(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb1, 0x04, 0x99
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_dynamic_elvss_ctrl3(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb1, 0x04, 0x9d
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_dynamic_elvss_ctrl4(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb1, 0x04, 0x9f
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_sleep_in(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x10, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_sleep_out(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x11, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_on(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x29, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_off(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x28, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_apply_level2_key(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf0, 0x5a, 0x5a
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_auto_power_on(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xfc, 0x5a, 0x5a
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_acl_on(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xc0, 0x01
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_acl_off(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xc0, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+/* Full white 50% reducing setting */
+static void s6e8ax0_acl_ctrl_set(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ /* Full white 50% reducing setting */
+ unsigned char cutoff_50[] = {
+ 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+ 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x08, 0x0f, 0x16, 0x1d, 0x24, 0x2a, 0x31, 0x38,
+ 0x3f, 0x46
+ };
+ /* Full white 45% reducing setting */
+ unsigned char cutoff_45[] = {
+ 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+ 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x07, 0x0d, 0x13, 0x19, 0x1f, 0x25, 0x2b, 0x31,
+ 0x37, 0x3d
+ };
+ /* Full white 40% reducing setting */
+ unsigned char cutoff_40[] = {
+ 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+ 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x06, 0x0c, 0x11, 0x16, 0x1c, 0x21, 0x26, 0x2b,
+ 0x31, 0x36
+ };
+
+ if (lcd->acl_enable) {
+ if (lcd->cur_acl = 0) {
+ if (lcd->gamma = 0 || lcd->gamma = 1) {
+ s6e8ax0_acl_off(lcd);
+ dev_dbg(&lcd->ld->dev,
+ "cur_acl=%d\n", lcd->cur_acl);
+ } else
+ s6e8ax0_acl_on(lcd);
+ }
+ switch (lcd->gamma) {
+ case 0: /* 30cd */
+ s6e8ax0_acl_off(lcd);
+ lcd->cur_acl = 0;
+ break;
+ case 1 ... 3: /* 50cd ~ 90cd */
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_LONG_WRITE,
+ cutoff_40,
+ ARRAY_SIZE(cutoff_40));
+ lcd->cur_acl = 40;
+ break;
+ case 4 ... 7: /* 120cd ~ 210cd */
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_LONG_WRITE,
+ cutoff_45,
+ ARRAY_SIZE(cutoff_45));
+ lcd->cur_acl = 45;
+ break;
+ case 8 ... 10: /* 220cd ~ 300cd */
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_LONG_WRITE,
+ cutoff_50,
+ ARRAY_SIZE(cutoff_50));
+ lcd->cur_acl = 50;
+ break;
+ default:
+ break;
+ }
+ } else {
+ s6e8ax0_acl_off(lcd);
+ lcd->cur_acl = 0;
+ dev_dbg(&lcd->ld->dev, "cur_acl = %d\n", lcd->cur_acl);
+ }
+}
+
+static void s6e8ax0_read_id(struct s6e8ax0 *lcd, u8 *mtp_id)
+{
+ unsigned int ret;
+ unsigned int addr = 0xd1; /* MTP ID */
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+ ret = ops->cmd_read(lcd_to_master(lcd),
+ MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM,
+ addr, 3, mtp_id);
+}
+
+static int s6e8ax0_panel_init(struct s6e8ax0 *lcd)
+{
+ s6e8ax0_apply_level2_key(lcd);
+ s6e8ax0_sleep_out(lcd);
+ mdelay(1);
+ s6e8ax0_panel_cond(lcd);
+ s6e8ax0_display_cond(lcd);
+ s6e8ax0_gamma_cond(lcd);
+ s6e8ax0_gamma_update(lcd);
+
+ s6e8ax0_etc_cond1(lcd);
+ s6e8ax0_etc_cond2(lcd);
+ s6e8ax0_etc_cond3(lcd);
+ s6e8ax0_etc_cond4(lcd);
+ s6e8ax0_etc_cond5(lcd);
+ s6e8ax0_etc_cond6(lcd);
+ s6e8ax0_etc_cond7(lcd);
+
+ s6e8ax0_elvss_nvm_set(lcd);
+ s6e8ax0_elvss_set(lcd);
+
+ s6e8ax0_acl_ctrl_set(lcd);
+ s6e8ax0_acl_on(lcd);
+
+ /* if ID3 value is not 33h, branch private elvss mode */
+ mdelay(lcd->ddi_pd->power_on_delay);
+
+ return 0;
+}
+
+static int s6e8ax0_update_gamma_ctrl(struct s6e8ax0 *lcd, int brightness)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ s6e8ax0_22_gamma_table[brightness],
+ GAMMA_TABLE_COUNT);
+
+ /* update gamma table. */
+ s6e8ax0_gamma_update(lcd);
+ lcd->gamma = brightness;
+
+ return 0;
+}
+
+static int s6e8ax0_gamma_ctrl(struct s6e8ax0 *lcd, int gamma)
+{
+ s6e8ax0_update_gamma_ctrl(lcd, gamma);
+
+ return 0;
+}
+
+static int s6e8ax0_set_power(struct lcd_device *ld, int power)
+{
+ struct s6e8ax0 *lcd = lcd_get_data(ld);
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ int ret = 0;
+
+ if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+ power != FB_BLANK_NORMAL) {
+ dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+ return -EINVAL;
+ }
+
+ if ((power = FB_BLANK_UNBLANK) && ops->set_blank_mode) {
+ /* LCD power on */
+ if ((POWER_IS_ON(power) && POWER_IS_OFF(lcd->power))
+ || (POWER_IS_ON(power) && POWER_IS_NRM(lcd->power))) {
+ ret = ops->set_blank_mode(lcd_to_master(lcd), power);
+ if (!ret && lcd->power != power)
+ lcd->power = power;
+ }
+ } else if ((power = FB_BLANK_POWERDOWN) && ops->set_early_blank_mode) {
+ /* LCD power off */
+ if ((POWER_IS_OFF(power) && POWER_IS_ON(lcd->power)) ||
+ (POWER_IS_ON(lcd->power) && POWER_IS_NRM(power))) {
+ ret = ops->set_early_blank_mode(lcd_to_master(lcd),
+ power);
+ if (!ret && lcd->power != power)
+ lcd->power = power;
+ }
+ }
+
+ return ret;
+}
+
+static int s6e8ax0_get_power(struct lcd_device *ld)
+{
+ struct s6e8ax0 *lcd = lcd_get_data(ld);
+
+ return lcd->power;
+}
+
+static int s6e8ax0_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int s6e8ax0_set_brightness(struct backlight_device *bd)
+{
+ int ret = 0, brightness = bd->props.brightness;
+ struct s6e8ax0 *lcd = bl_get_data(bd);
+
+ if (brightness < MIN_BRIGHTNESS ||
+ brightness > bd->props.max_brightness) {
+ dev_err(lcd->dev, "lcd brightness should be %d to %d.\n",
+ MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+ return -EINVAL;
+ }
+
+ ret = s6e8ax0_gamma_ctrl(lcd, brightness);
+ if (ret) {
+ dev_err(&bd->dev, "lcd brightness setting failed.\n");
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static struct lcd_ops s6e8ax0_lcd_ops = {
+ .set_power = s6e8ax0_set_power,
+ .get_power = s6e8ax0_get_power,
+};
+
+static struct backlight_ops s6e8ax0_backlight_ops = {
+ .get_brightness = s6e8ax0_get_brightness,
+ .update_status = s6e8ax0_set_brightness,
+};
+
+static void s6e8ax0_power_on(struct mipi_dsim_lcd_device *dsim_dev, int power)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ mdelay(lcd->ddi_pd->power_on_delay);
+
+ /* lcd power on */
+ if (power)
+ s6e8ax0_regulator_enable(lcd);
+ else
+ s6e8ax0_regulator_disable(lcd);
+
+ mdelay(lcd->ddi_pd->reset_delay);
+
+ /* lcd reset */
+ if (lcd->ddi_pd->reset)
+ lcd->ddi_pd->reset(lcd->ld);
+ mdelay(5);
+}
+
+static void s6e8ax0_set_sequence(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ s6e8ax0_panel_init(lcd);
+ s6e8ax0_display_on(lcd);
+
+ lcd->power = FB_BLANK_UNBLANK;
+}
+
+static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd;
+ int ret;
+ u8 mtp_id[3] = {0, };
+
+ lcd = kzalloc(sizeof(struct s6e8ax0), GFP_KERNEL);
+ if (!lcd) {
+ dev_err(&dsim_dev->dev, "failed to allocate s6e8ax0 structure.\n");
+ return -ENOMEM;
+ }
+
+ lcd->dsim_dev = dsim_dev;
+ lcd->ddi_pd = (struct lcd_platform_data *)dsim_dev->platform_data;
+ lcd->dev = &dsim_dev->dev;
+
+ mutex_init(&lcd->lock);
+
+ ret = regulator_bulk_get(lcd->dev, ARRAY_SIZE(supplies), supplies);
+ if (ret) {
+ dev_err(lcd->dev, "Failed to get regulators: %d\n", ret);
+ goto err_lcd_register;
+ }
+
+ lcd->ld = lcd_device_register("s6e8ax0", lcd->dev, lcd,
+ &s6e8ax0_lcd_ops);
+ if (IS_ERR(lcd->ld)) {
+ dev_err(lcd->dev, "failed to register lcd ops.\n");
+ ret = PTR_ERR(lcd->ld);
+ goto err_lcd_register;
+ }
+
+ lcd->bd = backlight_device_register("s6e8ax0-bl", lcd->dev, lcd,
+ &s6e8ax0_backlight_ops, NULL);
+ if (IS_ERR(lcd->bd)) {
+ dev_err(lcd->dev, "failed to register backlight ops.\n");
+ ret = PTR_ERR(lcd->bd);
+ goto err_backlight_register;
+ }
+
+ lcd->bd->props.max_brightness = MAX_BRIGHTNESS;
+ lcd->bd->props.brightness = MAX_BRIGHTNESS;
+
+ s6e8ax0_read_id(lcd, mtp_id);
+ if (mtp_id[0] = 0x00)
+ dev_err(lcd->dev, "read id failed\n");
+
+ dev_info(lcd->dev, "Read ID : %x, %x, %x\n",
+ mtp_id[0], mtp_id[1], mtp_id[2]);
+
+ if (mtp_id[2] = 0x33)
+ dev_info(lcd->dev,
+ "ID-3 is 0xff does not support dynamic elvss\n");
+ else
+ dev_info(lcd->dev,
+ "ID-3 is 0x%x support dynamic elvss\n", mtp_id[2]);
+
+ lcd->acl_enable = 1;
+ lcd->cur_acl = 0;
+
+ dev_set_drvdata(&dsim_dev->dev, lcd);
+
+ dev_dbg(lcd->dev, "probed s6e8ax0 panel driver.\n");
+
+ return 0;
+
+err_backlight_register:
+ lcd_device_unregister(lcd->ld);
+
+err_lcd_register:
+ regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+ kfree(lcd);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ s6e8ax0_sleep_in(lcd);
+ mdelay(lcd->ddi_pd->power_off_delay);
+ s6e8ax0_display_off(lcd);
+
+ s6e8ax0_regulator_disable(lcd);
+
+ return 0;
+}
+
+static int s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ s6e8ax0_sleep_out(lcd);
+ mdelay(lcd->ddi_pd->power_on_delay);
+
+ s6e8ax0_regulator_enable(lcd);
+ s6e8ax0_set_sequence(dsim_dev);
+
+ return 0;
+}
+#else
+#define s6e8ax0_suspend NULL
+#define s6e8ax0_resume NULL
+#endif
+
+static struct mipi_dsim_lcd_driver s6e8ax0_dsim_ddi_driver = {
+ .name = "s6e8ax0",
+ .id = -1,
+
+ .power_on = s6e8ax0_power_on,
+ .set_sequence = s6e8ax0_set_sequence,
+ .probe = s6e8ax0_probe,
+ .suspend = s6e8ax0_suspend,
+ .resume = s6e8ax0_resume,
+};
+
+static int s6e8ax0_init(void)
+{
+ s5p_mipi_dsi_register_lcd_driver(&s6e8ax0_dsim_ddi_driver);
+
+ return 0;
+}
+
+static void s6e8ax0_exit(void)
+{
+ return;
+}
+
+module_init(s6e8ax0_init);
+module_exit(s6e8ax0_exit);
+
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e8ax0 AMOLED LCD Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/s6e8ax0.h b/drivers/video/backlight/s6e8ax0.h
new file mode 100644
index 0000000..7a99845
--- /dev/null
+++ b/drivers/video/backlight/s6e8ax0.h
@@ -0,0 +1,26 @@
+/* linux/drivers/video/backlight/s6e8ax0.h
+ *
+ * MIPI-DSI based s6e8ax0 AMOLED LCD Panel definitions.
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S6E8AX0_H
+#define _S6E8AX0_H
+
+extern void s6e8ax0_init(void);
+extern void s6e8ax0_set_link(void *pd, unsigned int dsim_base,
+ unsigned char (*cmd_write) (unsigned int dsim_base, unsigned int data0,
+ unsigned int data1, unsigned int data2),
+ unsigned char (*cmd_read) (unsigned int dsim_base, unsigned int data0,
+ unsigned int data1, unsigned int data2));
+
+#endif
+
diff --git a/drivers/video/backlight/s6e8ax0_gamma.h b/drivers/video/backlight/s6e8ax0_gamma.h
new file mode 100644
index 0000000..0e892e8
--- /dev/null
+++ b/drivers/video/backlight/s6e8ax0_gamma.h
@@ -0,0 +1,217 @@
+/* linux/drivers/video/backlight/s6e8ax0_brightness.h
+ *
+ * Brightness level definition.
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S6E8AX0_BRIGHTNESS_H
+#define _S6E8AX0_BRIGHTNESS_H
+
+#define MAX_GAMMA_LEVEL 25
+#define GAMMA_TABLE_COUNT 26
+
+static unsigned char s6e8ax0_22_gamma_30[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xF5, 0x00, 0xFF, 0xAD, 0xAF,
+ 0xBA, 0xC3, 0xD8, 0xC5, 0x9F, 0xC6, 0x9E, 0xC1, 0xDC, 0xC0,
+ 0x00, 0x61, 0x00, 0x5A, 0x00, 0x74,
+};
+
+static unsigned char s6e8ax0_22_gamma_40[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xF5, 0x0F, 0xFF, 0xAF, 0xBE,
+ 0xBA, 0xC4, 0xDB, 0xC5, 0x9F, 0xC7, 0x9E, 0xBD, 0xD8, 0xBB,
+ 0x00, 0x69, 0x00, 0x62, 0x00, 0x7E,
+};
+
+static unsigned char s6e8ax0_22_gamma_50[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xE8, 0x1F, 0xF7, 0xAD, 0xC0,
+ 0xB5, 0xC4, 0xDC, 0xC4, 0x9E, 0xC6, 0x9C, 0xBB, 0xD8, 0xBB,
+ 0x00, 0x70, 0x00, 0x68, 0x00, 0x86,
+};
+
+static unsigned char s6e8ax0_22_gamma_60[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xDE, 0x1F, 0xEF, 0xAD, 0xC4,
+ 0xB3, 0xC3, 0xDD, 0xC4, 0x9E, 0xC6, 0x9C, 0xBC, 0xD6, 0xBA,
+ 0x00, 0x75, 0x00, 0x6E, 0x00, 0x8D,
+};
+
+static unsigned char s6e8ax0_22_gamma_70[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xD8, 0x1F, 0xE7, 0xAF, 0xC8,
+ 0xB4, 0xC4, 0xDD, 0xC3, 0x9D, 0xC6, 0x9C, 0xBB, 0xD6, 0xB9,
+ 0x00, 0x7A, 0x00, 0x72, 0x00, 0x93,
+};
+
+static unsigned char s6e8ax0_22_gamma_80[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xC9, 0x1F, 0xDE, 0xAE, 0xC9,
+ 0xB1, 0xC3, 0xDD, 0xC2, 0x9D, 0xC5, 0x9B, 0xBC, 0xD6, 0xBB,
+ 0x00, 0x7F, 0x00, 0x77, 0x00, 0x99,
+};
+
+static unsigned char s6e8ax0_22_gamma_90[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xC7, 0x1F, 0xD9, 0xB0, 0xCC,
+ 0xB2, 0xC3, 0xDC, 0xC1, 0x9C, 0xC6, 0x9C, 0xBC, 0xD4, 0xB9,
+ 0x00, 0x83, 0x00, 0x7B, 0x00, 0x9E,
+};
+
+static unsigned char s6e8ax0_22_gamma_100[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xBD, 0x80, 0xCD, 0xB1, 0xCE,
+ 0xB3, 0xC4, 0xDE, 0xC3, 0x9C, 0xC4, 0x9A, 0xB8, 0xD3, 0xB6,
+ 0x00, 0x88, 0x00, 0x80, 0x00, 0xA5,
+};
+
+static unsigned char s6e8ax0_22_gamma_110[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xBD, 0x95, 0xCD, 0xB1, 0xCE,
+ 0xB2, 0xC5, 0xDE, 0xC4, 0x9C, 0xC5, 0x9B, 0xB6, 0xD1, 0xB4,
+ 0x00, 0x8B, 0x00, 0x83, 0x00, 0xA8,
+};
+
+static unsigned char s6e8ax0_22_gamma_120[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB9, 0x95, 0xC8, 0xB1, 0xCF,
+ 0xB2, 0xC6, 0xDF, 0xC5, 0x9B, 0xC3, 0x99, 0xB6, 0xD2, 0xB6,
+ 0x00, 0x8F, 0x00, 0x86, 0x00, 0xAC,
+};
+
+static unsigned char s6e8ax0_22_gamma_130[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB7, 0xA0, 0xC7, 0xB1, 0xD0,
+ 0xB2, 0xC4, 0xDD, 0xC3, 0x9A, 0xC3, 0x98, 0xB6, 0xD0, 0xB4,
+ 0x00, 0x92, 0x00, 0x8A, 0x00, 0xB1,
+};
+
+static unsigned char s6e8ax0_22_gamma_140[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB7, 0xA0, 0xC5, 0xB2, 0xD0,
+ 0xB3, 0xC3, 0xDE, 0xC3, 0x9B, 0xC2, 0x98, 0xB6, 0xD0, 0xB4,
+ 0x00, 0x95, 0x00, 0x8D, 0x00, 0xB5,
+};
+
+static unsigned char s6e8ax0_22_gamma_150[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB3, 0xA0, 0xC2, 0xB2, 0xD0,
+ 0xB2, 0xC1, 0xDD, 0xC2, 0x9B, 0xC2, 0x98, 0xB4, 0xCF, 0xB1,
+ 0x00, 0x99, 0x00, 0x90, 0x00, 0xBA,
+};
+
+static unsigned char s6e8ax0_22_gamma_160[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xA5, 0xBF, 0xB0, 0xD0,
+ 0xB1, 0xC3, 0xDE, 0xC2, 0x99, 0xC1, 0x97, 0xB4, 0xCE, 0xB1,
+ 0x00, 0x9C, 0x00, 0x93, 0x00, 0xBE,
+};
+
+static unsigned char s6e8ax0_22_gamma_170[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB5, 0xBF, 0xB1, 0xD1,
+ 0xB1, 0xC3, 0xDE, 0xC3, 0x99, 0xC0, 0x96, 0xB4, 0xCE, 0xB1,
+ 0x00, 0x9F, 0x00, 0x96, 0x00, 0xC2,
+};
+
+static unsigned char s6e8ax0_22_gamma_180[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB7, 0xBE, 0xB3, 0xD2,
+ 0xB3, 0xC3, 0xDE, 0xC2, 0x97, 0xBF, 0x95, 0xB4, 0xCD, 0xB1,
+ 0x00, 0xA2, 0x00, 0x99, 0x00, 0xC5,
+};
+
+static unsigned char s6e8ax0_22_gamma_190[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB9, 0xBE, 0xB2, 0xD2,
+ 0xB2, 0xC3, 0xDD, 0xC3, 0x98, 0xBF, 0x95, 0xB2, 0xCC, 0xAF,
+ 0x00, 0xA5, 0x00, 0x9C, 0x00, 0xC9,
+};
+
+static unsigned char s6e8ax0_22_gamma_200[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB9, 0xBC, 0xB2, 0xD2,
+ 0xB1, 0xC4, 0xDD, 0xC3, 0x97, 0xBE, 0x95, 0xB1, 0xCB, 0xAE,
+ 0x00, 0xA8, 0x00, 0x9F, 0x00, 0xCD,
+};
+
+static unsigned char s6e8ax0_22_gamma_210[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xC1, 0xBD, 0xB1, 0xD1,
+ 0xB1, 0xC2, 0xDE, 0xC2, 0x97, 0xBE, 0x94, 0xB0, 0xC9, 0xAD,
+ 0x00, 0xAE, 0x00, 0xA4, 0x00, 0xD4,
+};
+
+static unsigned char s6e8ax0_22_gamma_220[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xC7, 0xBD, 0xB1, 0xD1,
+ 0xB1, 0xC2, 0xDD, 0xC2, 0x97, 0xBD, 0x94, 0xB0, 0xC9, 0xAD,
+ 0x00, 0xAD, 0x00, 0xA2, 0x00, 0xD3,
+};
+
+static unsigned char s6e8ax0_22_gamma_230[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xC3, 0xBD, 0xB2, 0xD1,
+ 0xB1, 0xC3, 0xDD, 0xC1, 0x96, 0xBD, 0x94, 0xB0, 0xC9, 0xAD,
+ 0x00, 0xB0, 0x00, 0xA7, 0x00, 0xD7,
+};
+
+static unsigned char s6e8ax0_22_gamma_240[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xCB, 0xBD, 0xB1, 0xD2,
+ 0xB1, 0xC3, 0xDD, 0xC2, 0x95, 0xBD, 0x93, 0xAF, 0xC8, 0xAB,
+ 0x00, 0xB3, 0x00, 0xA9, 0x00, 0xDB,
+};
+
+static unsigned char s6e8ax0_22_gamma_250[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB3, 0xCC, 0xBE, 0xB0, 0xD2,
+ 0xB0, 0xC3, 0xDD, 0xC2, 0x94, 0xBC, 0x92, 0xAE, 0xC8, 0xAB,
+ 0x00, 0xB6, 0x00, 0xAB, 0x00, 0xDE,
+};
+
+static unsigned char s6e8ax0_22_gamma_260[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB3, 0xD0, 0xBE, 0xAF, 0xD1,
+ 0xAF, 0xC2, 0xDD, 0xC1, 0x96, 0xBC, 0x93, 0xAF, 0xC8, 0xAC,
+ 0x00, 0xB7, 0x00, 0xAD, 0x00, 0xE0,
+};
+
+static unsigned char s6e8ax0_22_gamma_270[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB2, 0xCF, 0xBD, 0xB0, 0xD2,
+ 0xAF, 0xC2, 0xDC, 0xC1, 0x95, 0xBD, 0x93, 0xAE, 0xC6, 0xAA,
+ 0x00, 0xBA, 0x00, 0xB0, 0x00, 0xE4,
+};
+
+static unsigned char s6e8ax0_22_gamma_280[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB2, 0xD0, 0xBD, 0xAF, 0xD0,
+ 0xAD, 0xC4, 0xDD, 0xC3, 0x95, 0xBD, 0x93, 0xAC, 0xC5, 0xA9,
+ 0x00, 0xBD, 0x00, 0xB2, 0x00, 0xE7,
+};
+
+static unsigned char s6e8ax0_22_gamma_290[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB2, 0xD1, 0xBD, 0xB0, 0xD2,
+ 0xAF, 0xC2, 0xDC, 0xC1, 0x94, 0xBB, 0x91, 0xAC, 0xC5, 0xA9,
+ 0x00, 0xC0, 0x00, 0xB5, 0x00, 0xEB,
+};
+
+static unsigned char s6e8ax0_22_gamma_300[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB5, 0xD3, 0xBD, 0xB1, 0xD2,
+ 0xB0, 0xC0, 0xDC, 0xC0, 0x94, 0xBA, 0x91, 0xAC, 0xC5, 0xA9,
+ 0x00, 0xC2, 0x00, 0xB7, 0x00, 0xED,
+};
+
+static unsigned char *s6e8ax0_22_gamma_table[MAX_GAMMA_LEVEL] = {
+ s6e8ax0_22_gamma_30,
+ s6e8ax0_22_gamma_50,
+ s6e8ax0_22_gamma_60,
+ s6e8ax0_22_gamma_70,
+ s6e8ax0_22_gamma_80,
+ s6e8ax0_22_gamma_90,
+ s6e8ax0_22_gamma_100,
+ s6e8ax0_22_gamma_120,
+ s6e8ax0_22_gamma_130,
+ s6e8ax0_22_gamma_140,
+ s6e8ax0_22_gamma_150,
+ s6e8ax0_22_gamma_160,
+ s6e8ax0_22_gamma_170,
+ s6e8ax0_22_gamma_180,
+ s6e8ax0_22_gamma_190,
+ s6e8ax0_22_gamma_200,
+ s6e8ax0_22_gamma_210,
+ s6e8ax0_22_gamma_220,
+ s6e8ax0_22_gamma_230,
+ s6e8ax0_22_gamma_240,
+ s6e8ax0_22_gamma_250,
+ s6e8ax0_22_gamma_260,
+ s6e8ax0_22_gamma_270,
+ s6e8ax0_22_gamma_280,
+ s6e8ax0_22_gamma_300,
+};
+
+#endif
--
1.7.4.1
^ permalink raw reply related
* Re: [PATCH v3] video: support MIPI-DSI controller driver
From: Russell King - ARM Linux @ 2011-12-20 8:28 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <4EF00557.2000201@samsung.com>
On Tue, Dec 20, 2011 at 12:47:35PM +0900, Donghwa Lee wrote:
>
> Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI
> based LCD Panel could be used with it. This patch supports MIPI-DSI driver
> based Samsung SoC chip.
>
> LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
> machine code and LCD panel driver specific function registered to mipi_dsim_ddi
> structure at lcd panel init function called system init.
> In the MIPI-DSI driver, find lcd panel driver by using registered
> lcd panel name, and then initialize lcd panel driver.
>
> Changes since v2:
> - support regulators control in the driver.
> - avoid type casting and use array to read easily in data write
> function.
> - etc.
>
> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
> Signed-off-by: Inki Dae <inki.dae@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/video/Kconfig | 7 +
> drivers/video/Makefile | 2 +
> drivers/video/s5p_mipi_dsi.c | 619 ++++++++++++++++++++++
> drivers/video/s5p_mipi_dsi_common.c | 902 +++++++++++++++++++++++++++++++++
> drivers/video/s5p_mipi_dsi_common.h | 46 ++
> drivers/video/s5p_mipi_dsi_lowlevel.c | 627 +++++++++++++++++++++++
> drivers/video/s5p_mipi_dsi_lowlevel.h | 112 ++++
> drivers/video/s5p_mipi_dsi_regs.h | 156 ++++++
> include/linux/mipi_dsim.h | 361 +++++++++++++
> 9 files changed, 2832 insertions(+), 0 deletions(-)
> create mode 100644 drivers/video/s5p_mipi_dsi.c
> create mode 100644 drivers/video/s5p_mipi_dsi_common.c
> create mode 100644 drivers/video/s5p_mipi_dsi_common.h
> create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.c
> create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.h
> create mode 100644 drivers/video/s5p_mipi_dsi_regs.h
> create mode 100644 include/linux/mipi_dsim.h
>
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index d83e967..879177b 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -2082,6 +2082,13 @@ config FB_S3C2410_DEBUG
> Turn on debugging messages. Note that you can set/unset at run time
> through sysfs
>
> +config S5P_MIPI_DSI
> + tristate "Samsung SoC MIPI-DSI support."
> + depends on FB_S3C && (ARCH_S5PV210 || ARCH_S5PV310 || ARCH_EXYNOS)
> + default n
default n is the default default, so there's no point explicltly
specifying the default default default.
^ permalink raw reply
* Re: [PATCH V2 0/2] OMAPDSS: DISPC: Peformance improvement of DISPC
From: Tomi Valkeinen @ 2011-12-20 8:36 UTC (permalink / raw)
To: Chandrabhanu Mahapatra; +Cc: linux-omap, linux-fbdev
In-Reply-To: <1324283602-6383-1-git-send-email-cmahapatra@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1155 bytes --]
On Mon, 2011-12-19 at 14:03 +0530, Chandrabhanu Mahapatra wrote:
> Hi everyone,
> the following patch set directs to improve the scaling performance of DISPC
> module which consists of two pacthes.
>
> The first patch is based on code of Lajos Molnar <lajos@ti.com> from Android
> Kernel, which updates the code with new set of coefficients to improve the
> scaling performance.
>
> The second patch is based on some very valuable suggestions by
> Sebastien Fagard <s-fagard@ti.com> and directs to modify the clock
> requirements for scaling to support OMAP4 and avoid clock failure issues.
>
> I have tested these patches on OMAP2, OMAP3 AND OMAP4. To test on 2430SDP
> board I have created a patch to enable the display which will follow later.
>
> All your comments and suggestions are welcome.
Thanks, this looks good. Applied to DSS master branch. There was a minor
conflict with the Makefile, but I fixed that.
Btw, when doing new versions of a patch series, it would be good to have
a short history of the series in the introduction email, so that the
reviewers can easily see what's new in each version.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* [PATCH v4] video: support MIPI-DSI controller driver
From: Donghwa Lee @ 2011-12-20 8:38 UTC (permalink / raw)
To: linux-arm-kernel
Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI
based LCD Panel could be used with it. This patch supports MIPI-DSI driver
based Samsung SoC chip.
LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
machine code and LCD panel driver specific function registered to mipi_dsim_ddi
structure at lcd panel init function called system init.
In the MIPI-DSI driver, find lcd panel driver by using registered
lcd panel name, and then initialize lcd panel driver.
Changes since v3:
- remove useless code
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/video/Kconfig | 6 +
drivers/video/Makefile | 2 +
drivers/video/s5p_mipi_dsi.c | 620 ++++++++++++++++++++++
drivers/video/s5p_mipi_dsi_common.c | 902 +++++++++++++++++++++++++++++++++
drivers/video/s5p_mipi_dsi_common.h | 46 ++
drivers/video/s5p_mipi_dsi_lowlevel.c | 627 +++++++++++++++++++++++
drivers/video/s5p_mipi_dsi_lowlevel.h | 112 ++++
drivers/video/s5p_mipi_dsi_regs.h | 156 ++++++
include/linux/mipi_dsim.h | 361 +++++++++++++
9 files changed, 2832 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/s5p_mipi_dsi.c
create mode 100644 drivers/video/s5p_mipi_dsi_common.c
create mode 100644 drivers/video/s5p_mipi_dsi_common.h
create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.c
create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.h
create mode 100644 drivers/video/s5p_mipi_dsi_regs.h
create mode 100644 include/linux/mipi_dsim.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d83e967..bdc382e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2082,6 +2082,12 @@ config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config S5P_MIPI_DSI
+ tristate "Samsung SoC MIPI-DSI support."
+ depends on FB_S3C && (ARCH_S5PV210 || ARCH_EXYNOS)
+ help
+ This enables support for MIPI-DSI device.
+
config FB_NUC900
bool "NUC900 LCD framebuffer support"
depends on FB && ARCH_W90X900
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9b9d8ff..29eb7c9 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -120,6 +120,8 @@ obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
+obj-$(CONFIG_S5P_MIPI_DSI) += s5p_mipi_dsi.o s5p_mipi_dsi_common.o \
+ s5p_mipi_dsi_lowlevel.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
diff --git a/drivers/video/s5p_mipi_dsi.c b/drivers/video/s5p_mipi_dsi.c
new file mode 100644
index 0000000..c867cd0
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi.c
@@ -0,0 +1,620 @@
+/* linux/drivers/video/s5p_mipi_dsi.c
+ *
+ * Samsung SoC MIPI-DSIM driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/notifier.h>
+#include <linux/mipi_dsim.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/fb.h>
+
+#include "s5p_mipi_dsi_common.h"
+#include "s5p_mipi_dsi_lowlevel.h"
+
+#define master_to_driver(a) (a->dsim_lcd_drv)
+#define master_to_device(a) (a->dsim_lcd_dev)
+#define dev_to_dsim(a) platform_get_drvdata(to_platform_device(a))
+
+struct mipi_dsim_ddi {
+ int bus_id;
+ struct list_head list;
+ struct mipi_dsim_lcd_device *dsim_lcd_dev;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+};
+
+static LIST_HEAD(dsim_ddi_list);
+
+static DEFINE_MUTEX(mipi_dsim_lock);
+
+static struct s5p_platform_mipi_dsim *to_dsim_plat(struct platform_device *pdev)
+{
+ return (struct s5p_platform_mipi_dsim *)pdev->dev.platform_data;
+}
+
+static struct regulator_bulk_data supplies[] = {
+ { .supply = "vdd10", },
+ { .supply = "vdd18", },
+};
+
+static int s5p_mipi_regulator_enable(struct mipi_dsim_device *dsim)
+{
+ int ret = 0;
+
+ mutex_lock(&dsim->lock);
+ ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+ if (ret)
+ goto out;
+
+out:
+ mutex_unlock(&dsim->lock);
+ return ret;
+}
+
+static int s5p_mipi_regulator_disable(struct mipi_dsim_device *dsim)
+{
+ int ret = 0;
+
+ mutex_lock(&dsim->lock);
+ ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+ if (ret)
+ goto out;
+
+out:
+ mutex_unlock(&dsim->lock);
+ return ret;
+}
+
+/* update all register settings to MIPI DSI controller. */
+static void s5p_mipi_update_cfg(struct mipi_dsim_device *dsim)
+{
+ /*
+ * data from Display controller(FIMD) is not transferred in video mode
+ * but in case of command mode, all settings is not updated to
+ * registers.
+ */
+ s5p_mipi_dsi_stand_by(dsim, 0);
+
+ s5p_mipi_dsi_init_dsim(dsim);
+ s5p_mipi_dsi_init_link(dsim);
+
+ s5p_mipi_dsi_set_hs_enable(dsim);
+
+ /* set display timing. */
+ s5p_mipi_dsi_set_display_mode(dsim, dsim->dsim_config);
+
+ /*
+ * data from Display controller(FIMD) is transferred in video mode
+ * but in case of command mode, all settigs is updated to registers.
+ */
+ s5p_mipi_dsi_stand_by(dsim, 1);
+}
+
+static int s5p_mipi_dsi_early_blank_mode(struct mipi_dsim_device *dsim,
+ int power)
+{
+ struct mipi_dsim_lcd_driver *client_drv = master_to_driver(dsim);
+ struct mipi_dsim_lcd_device *client_dev = master_to_device(dsim);
+
+ switch (power) {
+ case FB_BLANK_POWERDOWN:
+ if (dsim->suspended)
+ return 0;
+
+ if (client_drv && client_drv->suspend)
+ client_drv->suspend(client_dev);
+
+ clk_disable(dsim->clock);
+
+ s5p_mipi_regulator_disable(dsim);
+
+ dsim->suspended = true;
+
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int s5p_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
+{
+ struct platform_device *pdev = to_platform_device(dsim->dev);
+ struct mipi_dsim_lcd_driver *client_drv = master_to_driver(dsim);
+ struct mipi_dsim_lcd_device *client_dev = master_to_device(dsim);
+
+ switch (power) {
+ case FB_BLANK_UNBLANK:
+ if (!dsim->suspended)
+ return 0;
+
+ /* lcd panel power on. */
+ if (client_drv && client_drv->power_on)
+ client_drv->power_on(client_dev, 1);
+
+ s5p_mipi_regulator_disable(dsim);
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, true);
+
+ clk_enable(dsim->clock);
+
+ s5p_mipi_update_cfg(dsim);
+
+ /* set lcd panel sequence commands. */
+ if (client_drv && client_drv->set_sequence)
+ client_drv->set_sequence(client_dev);
+
+ dsim->suspended = false;
+
+ break;
+ case FB_BLANK_NORMAL:
+ /* TODO. */
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev)
+{
+ struct mipi_dsim_ddi *dsim_ddi;
+
+ if (!lcd_dev) {
+ printk(KERN_ERR "mipi_dsim_lcd_device is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!lcd_dev->name) {
+ printk(KERN_ERR "dsim_lcd_device name is NULL.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi = kzalloc(sizeof(struct mipi_dsim_ddi), GFP_KERNEL);
+ if (!dsim_ddi) {
+ printk(KERN_ERR "failed to allocate dsim_ddi object.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi->dsim_lcd_dev = lcd_dev;
+
+ mutex_lock(&mipi_dsim_lock);
+ list_add_tail(&dsim_ddi->list, &dsim_ddi_list);
+ mutex_unlock(&mipi_dsim_lock);
+
+ return 0;
+}
+
+struct mipi_dsim_ddi
+ *s5p_mipi_dsi_find_lcd_device(struct mipi_dsim_lcd_driver *lcd_drv)
+{
+ struct mipi_dsim_ddi *dsim_ddi, *next;
+ struct mipi_dsim_lcd_device *lcd_dev;
+
+ mutex_lock(&mipi_dsim_lock);
+
+ list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+ if (!dsim_ddi)
+ goto out;
+
+ lcd_dev = dsim_ddi->dsim_lcd_dev;
+ if (!lcd_dev)
+ continue;
+
+ if ((strcmp(lcd_drv->name, lcd_dev->name)) = 0) {
+ /**
+ * bus_id would be used to identify
+ * connected bus.
+ */
+ dsim_ddi->bus_id = lcd_dev->bus_id;
+ mutex_unlock(&mipi_dsim_lock);
+
+ return dsim_ddi;
+ }
+
+ list_del(&dsim_ddi->list);
+ kfree(dsim_ddi);
+ }
+
+out:
+ mutex_unlock(&mipi_dsim_lock);
+
+ return NULL;
+}
+
+int s5p_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver *lcd_drv)
+{
+ struct mipi_dsim_ddi *dsim_ddi;
+
+ if (!lcd_drv) {
+ printk(KERN_ERR "mipi_dsim_lcd_driver is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!lcd_drv->name) {
+ printk(KERN_ERR "dsim_lcd_driver name is NULL.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi = s5p_mipi_dsi_find_lcd_device(lcd_drv);
+ if (!dsim_ddi) {
+ printk(KERN_ERR "mipi_dsim_ddi object not found.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi->dsim_lcd_drv = lcd_drv;
+
+ printk(KERN_INFO "registered panel driver(%s) to mipi-dsi driver.\n",
+ lcd_drv->name);
+
+ return 0;
+
+}
+
+struct mipi_dsim_ddi
+ *s5p_mipi_dsi_bind_lcd_ddi(struct mipi_dsim_device *dsim,
+ const char *name)
+{
+ struct mipi_dsim_ddi *dsim_ddi, *next;
+ struct mipi_dsim_lcd_driver *lcd_drv;
+ struct mipi_dsim_lcd_device *lcd_dev;
+ int ret;
+
+ mutex_lock(&dsim->lock);
+
+ list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+ lcd_drv = dsim_ddi->dsim_lcd_drv;
+ lcd_dev = dsim_ddi->dsim_lcd_dev;
+ if (!lcd_drv || !lcd_dev ||
+ (dsim->id != dsim_ddi->bus_id))
+ continue;
+
+ dev_dbg(dsim->dev, "lcd_drv->id = %d, lcd_dev->id = %d\n",
+ lcd_drv->id, lcd_dev->id);
+ dev_dbg(dsim->dev, "lcd_dev->bus_id = %d, dsim->id = %d\n",
+ lcd_dev->bus_id, dsim->id);
+
+ if ((strcmp(lcd_drv->name, name) = 0)) {
+ lcd_dev->master = dsim;
+
+ lcd_dev->dev.parent = dsim->dev;
+ dev_set_name(&lcd_dev->dev, "%s", lcd_drv->name);
+
+ ret = device_register(&lcd_dev->dev);
+ if (ret < 0) {
+ dev_err(dsim->dev,
+ "can't register %s, status %d\n",
+ dev_name(&lcd_dev->dev), ret);
+ mutex_unlock(&dsim->lock);
+
+ return NULL;
+ }
+
+ dsim->dsim_lcd_dev = lcd_dev;
+ dsim->dsim_lcd_drv = lcd_drv;
+
+ mutex_unlock(&dsim->lock);
+
+ return dsim_ddi;
+ }
+ }
+
+ mutex_unlock(&dsim->lock);
+
+ return NULL;
+}
+
+/* define MIPI-DSI Master operations. */
+static struct mipi_dsim_master_ops master_ops = {
+ .cmd_read = s5p_mipi_dsi_rd_data,
+ .cmd_write = s5p_mipi_dsi_wr_data,
+ .get_dsim_frame_done = s5p_mipi_dsi_get_frame_done_status,
+ .clear_dsim_frame_done = s5p_mipi_dsi_clear_frame_done,
+ .set_early_blank_mode = s5p_mipi_dsi_early_blank_mode,
+ .set_blank_mode = s5p_mipi_dsi_blank_mode,
+};
+
+static int s5p_mipi_dsi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct mipi_dsim_device *dsim;
+ struct mipi_dsim_config *dsim_config;
+ struct mipi_dsim_platform_data *dsim_pd;
+ struct mipi_dsim_ddi *dsim_ddi;
+ int ret = -EINVAL;
+
+ dsim = kzalloc(sizeof(struct mipi_dsim_device), GFP_KERNEL);
+ if (!dsim) {
+ dev_err(&pdev->dev, "failed to allocate dsim object.\n");
+ return -EFAULT;
+ }
+
+ dsim->pd = to_dsim_plat(pdev);
+ dsim->dev = &pdev->dev;
+ dsim->id = pdev->id;
+
+ /* get mipi_dsim_platform_data. */
+ dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
+ if (dsim_pd = NULL) {
+ dev_err(&pdev->dev, "failed to get platform data for dsim.\n");
+ return -EFAULT;
+ }
+ /* get mipi_dsim_config. */
+ dsim_config = dsim_pd->dsim_config;
+ if (dsim_config = NULL) {
+ dev_err(&pdev->dev, "failed to get dsim config data.\n");
+ return -EFAULT;
+ }
+
+ dsim->dsim_config = dsim_config;
+ dsim->master_ops = &master_ops;
+
+ mutex_init(&dsim->lock);
+
+ ret = regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies), supplies);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get regulators: %d\n", ret);
+ goto out_free_reg;
+ }
+
+ dsim->clock = clk_get(&pdev->dev, "dsim0");
+ if (IS_ERR(dsim->clock)) {
+ dev_err(&pdev->dev, "failed to get dsim clock source\n");
+ goto err_clock_get;
+ }
+
+ clk_enable(dsim->clock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get io memory region\n");
+ goto err_platform_get;
+ }
+
+ dsim->res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!dsim->res) {
+ dev_err(&pdev->dev, "failed to request io memory region\n");
+ ret = -ENOMEM;
+ goto err_mem_region;
+ }
+
+ dsim->reg_base = ioremap(res->start, resource_size(res));
+ if (!dsim->reg_base) {
+ dev_err(&pdev->dev, "failed to remap io region\n");
+ ret = -EFAULT;
+ goto err_ioremap;
+ }
+
+ mutex_init(&dsim->lock);
+
+ /* bind lcd ddi matched with panel name. */
+ dsim_ddi = s5p_mipi_dsi_bind_lcd_ddi(dsim, dsim_pd->lcd_panel_name);
+ if (!dsim_ddi) {
+ dev_err(&pdev->dev, "mipi_dsim_ddi object not found.\n");
+ goto err_bind;
+ }
+
+ dsim->irq = platform_get_irq(pdev, 0);
+ if (dsim->irq < 0) {
+ dev_err(&pdev->dev, "failed to request dsim irq resource\n");
+ ret = -EINVAL;
+ goto err_platform_get_irq;
+ }
+
+ ret = request_irq(dsim->irq, s5p_mipi_dsi_interrupt_handler,
+ IRQF_SHARED, pdev->name, dsim);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "failed to request dsim irq\n");
+ ret = -EINVAL;
+ goto err_bind;
+ }
+
+ init_completion(&dsim_wr_comp);
+ init_completion(&dsim_rd_comp);
+
+ /* enable interrupt */
+ s5p_mipi_dsi_init_interrupt(dsim);
+
+ /* initialize mipi-dsi client(lcd panel). */
+ if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->probe)
+ dsim_ddi->dsim_lcd_drv->probe(dsim_ddi->dsim_lcd_dev);
+
+ /* in case that mipi got enabled at bootloader. */
+ if (dsim_pd->enabled)
+ goto out;
+
+ /* lcd panel power on. */
+ if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->power_on)
+ dsim_ddi->dsim_lcd_drv->power_on(dsim_ddi->dsim_lcd_dev, 1);
+
+ s5p_mipi_regulator_enable(dsim);
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, true);
+
+ s5p_mipi_update_cfg(dsim);
+
+ /* set lcd panel sequence commands. */
+ if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->set_sequence)
+ dsim_ddi->dsim_lcd_drv->set_sequence(dsim_ddi->dsim_lcd_dev);
+
+ dsim->suspended = false;
+
+out:
+ platform_set_drvdata(pdev, dsim);
+
+ dev_dbg(&pdev->dev, "mipi-dsi driver(%s mode) has been probed.\n",
+ (dsim_config->e_interface = DSIM_COMMAND) ?
+ "CPU" : "RGB");
+
+ return 0;
+
+err_bind:
+ iounmap((void __iomem *) dsim->reg_base);
+
+err_ioremap:
+ release_mem_region(dsim->res->start, resource_size(dsim->res));
+
+err_mem_region:
+ release_resource(dsim->res);
+
+err_platform_get:
+ clk_disable(dsim->clock);
+ clk_put(dsim->clock);
+out_free_reg:
+ regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+err_clock_get:
+ kfree(dsim);
+
+err_platform_get_irq:
+ return ret;
+}
+
+static int __devexit s5p_mipi_dsi_remove(struct platform_device *pdev)
+{
+ struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+ struct mipi_dsim_ddi *dsim_ddi, *next;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+ iounmap(dsim->reg_base);
+
+ clk_disable(dsim->clock);
+ clk_put(dsim->clock);
+
+ release_resource(dsim->res);
+ release_mem_region(dsim->res->start, resource_size(dsim->res));
+
+ list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+ if (dsim_ddi) {
+ if (dsim->id != dsim_ddi->bus_id)
+ continue;
+
+ dsim_lcd_drv = dsim_ddi->dsim_lcd_drv;
+
+ if (dsim_lcd_drv->remove)
+ dsim_lcd_drv->remove(dsim_ddi->dsim_lcd_dev);
+
+ kfree(dsim_ddi);
+ }
+ }
+
+ regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+ kfree(dsim);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5p_mipi_dsi_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+
+ disable_irq(dsim->irq);
+
+ if (dsim->suspended)
+ return 0;
+
+ if (master_to_driver(dsim) && (master_to_driver(dsim))->suspend)
+ (master_to_driver(dsim))->suspend(master_to_device(dsim));
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, false);
+
+ clk_disable(dsim->clock);
+
+ s5p_mipi_regulator_disable(dsim);
+
+ dsim->suspended = true;
+
+ return 0;
+}
+
+static int s5p_mipi_dsi_resume(struct platform_device *pdev)
+{
+ struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+ struct mipi_dsim_lcd_driver *client_drv = master_to_driver(dsim);
+ struct mipi_dsim_lcd_device *client_dev = master_to_device(dsim);
+
+ enable_irq(dsim->irq);
+
+ if (!dsim->suspended)
+ return 0;
+
+ /* lcd panel power on. */
+ if (client_drv && client_drv->power_on)
+ client_drv->power_on(client_dev, 1);
+
+ s5p_mipi_regulator_enable(dsim);
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, true);
+
+ clk_enable(dsim->clock);
+
+ s5p_mipi_update_cfg(dsim);
+
+ /* set lcd panel sequence commands. */
+ if (client_drv && client_drv->set_sequence)
+ client_drv->set_sequence(client_dev);
+
+ dsim->suspended = false;
+
+ return 0;
+}
+#else
+#define s5p_mipi_dsi_suspend NULL
+#define s5p_mipi_dsi_resume NULL
+#endif
+
+static struct platform_driver s5p_mipi_dsi_driver = {
+ .probe = s5p_mipi_dsi_probe,
+ .remove = __devexit_p(s5p_mipi_dsi_remove),
+ .suspend = s5p_mipi_dsi_suspend,
+ .resume = s5p_mipi_dsi_resume,
+ .driver = {
+ .name = "s5p-mipi-dsim",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(s5p_mipi_dsi_driver);
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samusung SoC MIPI-DSI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/s5p_mipi_dsi_common.c b/drivers/video/s5p_mipi_dsi_common.c
new file mode 100644
index 0000000..46fe2a7
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_common.c
@@ -0,0 +1,902 @@
+/* linux/drivers/video/s5p_mipi_dsi_common.c
+ *
+ * Samsung SoC MIPI-DSI common driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/mipi_dsim.h>
+
+#include <video/mipi_display.h>
+
+#include <mach/map.h>
+
+#include "s5p_mipi_dsi_regs.h"
+#include "s5p_mipi_dsi_lowlevel.h"
+#include "s5p_mipi_dsi_common.h"
+
+#define MIPI_FIFO_TIMEOUT msecs_to_jiffies(250)
+#define MIPI_RX_FIFO_READ_DONE 0x30800002
+#define MIPI_MAX_RX_FIFO 20
+#define MHZ (1000 * 1000)
+#define FIN_HZ (24 * MHZ)
+
+#define DFIN_PLL_MIN_HZ (6 * MHZ)
+#define DFIN_PLL_MAX_HZ (12 * MHZ)
+
+#define DFVCO_MIN_HZ (500 * MHZ)
+#define DFVCO_MAX_HZ (1000 * MHZ)
+
+#define TRY_GET_FIFO_TIMEOUT (5000 * 2)
+#define TRY_FIFO_CLEAR (10)
+
+/* MIPI-DSIM status types. */
+enum {
+ DSIM_STATE_INIT, /* should be initialized. */
+ DSIM_STATE_STOP, /* CPU and LCDC are LP mode. */
+ DSIM_STATE_HSCLKEN, /* HS clock was enabled. */
+ DSIM_STATE_ULPS
+};
+
+/* define DSI lane types. */
+enum {
+ DSIM_LANE_CLOCK = (1 << 0),
+ DSIM_LANE_DATA0 = (1 << 1),
+ DSIM_LANE_DATA1 = (1 << 2),
+ DSIM_LANE_DATA2 = (1 << 3),
+ DSIM_LANE_DATA3 = (1 << 4)
+};
+
+static unsigned int dpll_table[15] = {
+ 100, 120, 170, 220, 270,
+ 320, 390, 450, 510, 560,
+ 640, 690, 770, 870, 950
+};
+
+irqreturn_t s5p_mipi_dsi_interrupt_handler(int irq, void *dev_id)
+{
+ unsigned int intsrc = 0;
+ unsigned int intmsk = 0;
+ struct mipi_dsim_device *dsim = NULL;
+
+ dsim = (struct mipi_dsim_device *)dev_id;
+ if (!dsim) {
+ dev_dbg(dsim->dev, KERN_ERR "%s:error: wrong parameter\n",
+ __func__);
+ return IRQ_HANDLED;
+ }
+
+ intsrc = s5p_mipi_dsi_read_interrupt(dsim);
+ intmsk = s5p_mipi_dsi_read_interrupt_mask(dsim);
+
+ intmsk = ~(intmsk) & intsrc;
+
+ switch (intmsk) {
+ case INTMSK_RX_DONE:
+ complete(&dsim_rd_comp);
+ dev_dbg(dsim->dev, "MIPI INTMSK_RX_DONE\n");
+ break;
+ case INTMSK_FIFO_EMPTY:
+ complete(&dsim_wr_comp);
+ dev_dbg(dsim->dev, "MIPI INTMSK_FIFO_EMPTY\n");
+ break;
+ default:
+ break;
+ }
+
+ s5p_mipi_dsi_clear_interrupt(dsim, intmsk);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * write long packet to mipi dsi slave
+ * @dsim: mipi dsim device structure.
+ * @data0: packet data to send.
+ * @data1: size of packet data
+ */
+static void s5p_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim,
+ unsigned char *data0, unsigned int data_size)
+{
+ unsigned int data_cnt = 0, payload = 0;
+
+ /* in case that data count is more then 4 */
+ for (data_cnt = 0; data_cnt < data_size; data_cnt += 4) {
+ /*
+ * after sending 4bytes per one time,
+ * send remainder data less then 4.
+ */
+ if ((data_size - data_cnt) < 4) {
+ if ((data_size - data_cnt) = 3) {
+ payload = data0[data_cnt] |
+ data0[data_cnt + 1] << 8 |
+ data0[data_cnt + 2] << 16;
+ dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n",
+ payload, data0[data_cnt],
+ data0[data_cnt + 1],
+ data0[data_cnt + 2]);
+ } else if ((data_size - data_cnt) = 2) {
+ payload = data0[data_cnt] |
+ data0[data_cnt + 1] << 8;
+ dev_dbg(dsim->dev,
+ "count = 2 payload = %x, %x %x\n", payload,
+ data0[data_cnt],
+ data0[data_cnt + 1]);
+ } else if ((data_size - data_cnt) = 1) {
+ payload = data0[data_cnt];
+ }
+
+ s5p_mipi_dsi_wr_tx_data(dsim, payload);
+ /* send 4bytes per one time. */
+ } else {
+ payload = data0[data_cnt] |
+ data0[data_cnt + 1] << 8 |
+ data0[data_cnt + 2] << 16 |
+ data0[data_cnt + 3] << 24;
+
+ dev_dbg(dsim->dev,
+ "count = 4 payload = %x, %x %x %x %x\n",
+ payload, *(u8 *)(data0 + data_cnt),
+ data0[data_cnt + 1],
+ data0[data_cnt + 2],
+ data0[data_cnt + 3]);
+
+ s5p_mipi_dsi_wr_tx_data(dsim, payload);
+ }
+ }
+}
+
+int s5p_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned char *data0, unsigned int data_size)
+{
+ unsigned int check_rx_ack = 0;
+
+ if (dsim->state = DSIM_STATE_ULPS) {
+ dev_err(dsim->dev, "state is ULPS.\n");
+
+ return -EINVAL;
+ }
+
+ /* FIXME!!! why does it need this delay? */
+ msleep(20);
+
+ mutex_lock(&dsim->lock);
+
+ switch (data_id) {
+ /* short packet types of packet types for command. */
+ case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+ case MIPI_DSI_DCS_SHORT_WRITE:
+ case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+ s5p_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
+ if (check_rx_ack) {
+ /* process response func should be implemented */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+
+ /* general command */
+ case MIPI_DSI_COLOR_MODE_OFF:
+ case MIPI_DSI_COLOR_MODE_ON:
+ case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+ case MIPI_DSI_TURN_ON_PERIPHERAL:
+ s5p_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
+ if (check_rx_ack) {
+ /* process response func should be implemented. */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+
+ /* packet types for video data */
+ case MIPI_DSI_V_SYNC_START:
+ case MIPI_DSI_V_SYNC_END:
+ case MIPI_DSI_H_SYNC_START:
+ case MIPI_DSI_H_SYNC_END:
+ case MIPI_DSI_END_OF_TRANSMISSION:
+ mutex_unlock(&dsim->lock);
+ return 0;
+
+ /* long packet type and null packet */
+ case MIPI_DSI_NULL_PACKET:
+ case MIPI_DSI_BLANKING_PACKET:
+ mutex_unlock(&dsim->lock);
+ return 0;
+ case MIPI_DSI_GENERIC_LONG_WRITE:
+ case MIPI_DSI_DCS_LONG_WRITE:
+ {
+ unsigned int size, payload = 0;
+ INIT_COMPLETION(dsim_wr_comp);
+
+ size = data_size * 4;
+
+ /* if data count is less then 4, then send 3bytes data. */
+ if (data_size < 4) {
+ payload = data0[0] |
+ data0[1] << 8 |
+ data0[2] << 16;
+
+ s5p_mipi_dsi_wr_tx_data(dsim, payload);
+
+ dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n",
+ data_size, payload, data0[0],
+ data0[1], data0[2]);
+
+ /* in case that data count is more then 4 */
+ } else
+ s5p_mipi_dsi_long_data_wr(dsim, data0, data_size);
+
+ /* put data into header fifo */
+ s5p_mipi_dsi_wr_tx_header(dsim, data_id, data_size & 0xff,
+ (data_size & 0xff00) >> 8);
+
+ if (!wait_for_completion_interruptible_timeout(&dsim_wr_comp,
+ MIPI_FIFO_TIMEOUT)) {
+ dev_warn(dsim->dev, "command write timeout.\n");
+ mutex_unlock(&dsim->lock);
+ return -EAGAIN;
+ }
+
+ if (check_rx_ack) {
+ /* process response func should be implemented. */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+ }
+
+ /* packet typo for video data */
+ case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+ case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+ if (check_rx_ack) {
+ /* process response func should be implemented. */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+ default:
+ dev_warn(dsim->dev,
+ "data id %x is not supported current DSI spec.\n",
+ data_id);
+
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&dsim->lock);
+ return 0;
+}
+
+static unsigned int s5p_mipi_dsi_long_data_rd(struct mipi_dsim_device *dsim,
+ unsigned int req_size, unsigned int rx_data, u8 *rx_buf)
+{
+ unsigned int rcv_pkt, i, j;
+ u16 rxsize;
+
+ /* for long packet */
+ rxsize = (u16)((rx_data & 0x00ffff00) >> 8);
+ dev_dbg(dsim->dev, "mipi dsi rx size : %d\n", rxsize);
+ if (rxsize != req_size) {
+ dev_dbg(dsim->dev,
+ KERN_ERR "received data size mismatch \
+ received: %d, requested: %d\n", rxsize, req_size);
+ goto err;
+ }
+
+ for (i = 0; i < (rxsize >> 2); i++) {
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+ dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
+ for (j = 0; j < 4; j++) {
+ rx_buf[(i * 4) + j] + (u8)(rcv_pkt >> (j * 8)) & 0xff;
+ dev_dbg(dsim->dev, "received value : %02x\n",
+ (rcv_pkt >> (j * 8)) & 0xff);
+ }
+ }
+ if (rxsize % 4) {
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+ dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
+ for (j = 0; j < (rxsize % 4); j++) {
+ rx_buf[(i * 4) + j] + (u8)(rcv_pkt >> (j * 8)) & 0xff;
+ dev_dbg(dsim->dev, "received value : %02x\n",
+ (rcv_pkt >> (j * 8)) & 0xff);
+ }
+ }
+
+ return rxsize;
+
+err:
+ return -EINVAL;
+}
+
+static unsigned int s5p_mipi_dsi_respense_size(unsigned int req_size)
+{
+ u8 response;
+ switch (req_size) {
+ case 1:
+ response = MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE;
+ break;
+ case 2:
+ response = MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE;
+ break;
+ default:
+ response = MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE;
+ break;
+ }
+
+ return response;
+}
+
+int s5p_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf)
+{
+ unsigned int rx_data, rcv_pkt, i;
+ u8 response = 0;
+ u16 rxsize;
+
+ if (dsim->state = DSIM_STATE_ULPS) {
+ dev_err(dsim->dev, "state is ULPS.\n");
+
+ return -EINVAL;
+ }
+
+ /* FIXME!!! */
+ msleep(20);
+
+ mutex_lock(&dsim->lock);
+ INIT_COMPLETION(dsim_rd_comp);
+ s5p_mipi_dsi_rd_tx_header(dsim,
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, req_size);
+
+ response = s5p_mipi_dsi_respense_size(req_size);
+
+ switch (data_id) {
+ case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+ case MIPI_DSI_DCS_READ:
+ s5p_mipi_dsi_rd_tx_header(dsim,
+ data_id, data0);
+ /* process response func should be implemented. */
+ break;
+ default:
+ dev_warn(dsim->dev,
+ "data id %x is not supported current DSI spec.\n",
+ data_id);
+
+ return -EINVAL;
+ }
+
+ if (!wait_for_completion_interruptible_timeout(&dsim_rd_comp,
+ MIPI_FIFO_TIMEOUT)) {
+ printk(KERN_ERR "RX done interrupt timeout\n");
+ mutex_unlock(&dsim->lock);
+ return 0;
+ }
+
+ msleep(20);
+
+ rx_data = s5p_mipi_dsi_rd_rx_fifo(dsim);
+
+ if ((u8)(rx_data & 0xff) != response) {
+ printk(KERN_ERR
+ "mipi dsi wrong response rx_data : %x, response:%x\n",
+ rx_data, response);
+ goto clear_rx_fifo;
+ }
+
+ if (req_size <= 2) {
+ /* for short packet */
+ for (i = 0; i < req_size; i++)
+ rx_buf[i] = (rx_data >> (8 + (i * 8))) & 0xff;
+ rxsize = req_size;
+ } else {
+ /* for long packet */
+ rxsize = s5p_mipi_dsi_long_data_rd(dsim, req_size, rx_data,
+ rx_buf);
+ if (rxsize != req_size)
+ goto clear_rx_fifo;
+ }
+
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+
+ msleep(20);
+
+ if (rcv_pkt != MIPI_RX_FIFO_READ_DONE) {
+ dev_info(dsim->dev,
+ "Can't found RX FIFO READ DONE FLAG : %x\n", rcv_pkt);
+ goto clear_rx_fifo;
+ }
+
+ mutex_unlock(&dsim->lock);
+
+ return rxsize;
+
+clear_rx_fifo:
+ i = 0;
+ while (1) {
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+ if ((rcv_pkt = MIPI_RX_FIFO_READ_DONE)
+ || (i > MIPI_MAX_RX_FIFO))
+ break;
+ dev_dbg(dsim->dev,
+ "mipi dsi clear rx fifo : %08x\n", rcv_pkt);
+ i++;
+ }
+ dev_info(dsim->dev,
+ "mipi dsi rx done count : %d, rcv_pkt : %08x\n", i, rcv_pkt);
+
+ mutex_unlock(&dsim->lock);
+
+ return 0;
+}
+
+static int s5p_mipi_dsi_pll_on(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ int sw_timeout;
+
+ if (enable) {
+ sw_timeout = 1000;
+
+ s5p_mipi_dsi_enable_pll(dsim, 1);
+ while (1) {
+ sw_timeout--;
+ if (s5p_mipi_dsi_is_pll_stable(dsim))
+ return 0;
+ if (sw_timeout = 0)
+ return -EINVAL;
+ }
+ } else
+ s5p_mipi_dsi_enable_pll(dsim, 0);
+
+ return 0;
+}
+
+static unsigned long s5p_mipi_dsi_change_pll(struct mipi_dsim_device *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler)
+{
+ unsigned long dfin_pll, dfvco, dpll_out;
+ unsigned int i, freq_band = 0xf;
+
+ dfin_pll = (FIN_HZ / pre_divider);
+
+ /******************************************************
+ * Serial Clock(=ByteClk X 8) FreqBand[3:0] *
+ ******************************************************
+ * ~ 99.99 MHz 0000
+ * 100 ~ 119.99 MHz 0001
+ * 120 ~ 159.99 MHz 0010
+ * 160 ~ 199.99 MHz 0011
+ * 200 ~ 239.99 MHz 0100
+ * 140 ~ 319.99 MHz 0101
+ * 320 ~ 389.99 MHz 0110
+ * 390 ~ 449.99 MHz 0111
+ * 450 ~ 509.99 MHz 1000
+ * 510 ~ 559.99 MHz 1001
+ * 560 ~ 639.99 MHz 1010
+ * 640 ~ 689.99 MHz 1011
+ * 690 ~ 769.99 MHz 1100
+ * 770 ~ 869.99 MHz 1101
+ * 870 ~ 949.99 MHz 1110
+ * 950 ~ 1000 MHz 1111
+ ******************************************************/
+ if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) {
+ dev_warn(dsim->dev, "fin_pll range should be 6MHz ~ 12MHz\n");
+ s5p_mipi_dsi_enable_afc(dsim, 0, 0);
+ } else {
+ if (dfin_pll < 7 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x1);
+ else if (dfin_pll < 8 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x0);
+ else if (dfin_pll < 9 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x3);
+ else if (dfin_pll < 10 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x2);
+ else if (dfin_pll < 11 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x5);
+ else
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x4);
+ }
+
+ dfvco = dfin_pll * main_divider;
+ dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n",
+ dfvco, dfin_pll, main_divider);
+ if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ)
+ dev_warn(dsim->dev, "fvco range should be 500MHz ~ 1000MHz\n");
+
+ dpll_out = dfvco / (1 << scaler);
+ dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n",
+ dpll_out, dfvco, scaler);
+
+ for (i = 0; i < ARRAY_SIZE(dpll_table); i++) {
+ if (dpll_out < dpll_table[i] * MHZ) {
+ freq_band = i;
+ break;
+ }
+ }
+
+ dev_dbg(dsim->dev, "freq_band = %d\n", freq_band);
+
+ s5p_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler);
+
+ s5p_mipi_dsi_hs_zero_ctrl(dsim, 0);
+ s5p_mipi_dsi_prep_ctrl(dsim, 0);
+
+ /* Freq Band */
+ s5p_mipi_dsi_pll_freq_band(dsim, freq_band);
+
+ /* Stable time */
+ s5p_mipi_dsi_pll_stable_time(dsim, dsim->dsim_config->pll_stable_time);
+
+ /* Enable PLL */
+ dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n",
+ (dpll_out / MHZ));
+
+ return dpll_out;
+}
+
+static int s5p_mipi_dsi_set_clock(struct mipi_dsim_device *dsim,
+ unsigned int byte_clk_sel, unsigned int enable)
+{
+ unsigned int esc_div;
+ unsigned long esc_clk_error_rate;
+ unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0;
+
+ if (enable) {
+ dsim->e_clk_src = byte_clk_sel;
+
+ /* Escape mode clock and byte clock source */
+ s5p_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel);
+
+ /* DPHY, DSIM Link : D-PHY clock out */
+ if (byte_clk_sel = DSIM_PLL_OUT_DIV8) {
+ hs_clk = s5p_mipi_dsi_change_pll(dsim,
+ dsim->dsim_config->p, dsim->dsim_config->m,
+ dsim->dsim_config->s);
+ if (hs_clk = 0) {
+ dev_err(dsim->dev,
+ "failed to get hs clock.\n");
+ return -EINVAL;
+ }
+
+ byte_clk = hs_clk / 8;
+ s5p_mipi_dsi_enable_pll_bypass(dsim, 0);
+ s5p_mipi_dsi_pll_on(dsim, 1);
+ /* DPHY : D-PHY clock out, DSIM link : external clock out */
+ } else if (byte_clk_sel = DSIM_EXT_CLK_DIV8) {
+ dev_warn(dsim->dev, "this project is not support\n");
+ dev_warn(dsim->dev,
+ "external clock source for MIPI DSIM.\n");
+ } else if (byte_clk_sel = DSIM_EXT_CLK_BYPASS) {
+ dev_warn(dsim->dev, "this project is not support\n");
+ dev_warn(dsim->dev,
+ "external clock source for MIPI DSIM\n");
+ }
+
+ /* escape clock divider */
+ esc_div = byte_clk / (dsim->dsim_config->esc_clk);
+ dev_dbg(dsim->dev,
+ "esc_div = %d, byte_clk = %lu, esc_clk = %lu\n",
+ esc_div, byte_clk, dsim->dsim_config->esc_clk);
+ if ((byte_clk / esc_div) >= (20 * MHZ) ||
+ (byte_clk / esc_div) >
+ dsim->dsim_config->esc_clk)
+ esc_div += 1;
+
+ escape_clk = byte_clk / esc_div;
+ dev_dbg(dsim->dev,
+ "escape_clk = %lu, byte_clk = %lu, esc_div = %d\n",
+ escape_clk, byte_clk, esc_div);
+
+ /* enable escape clock. */
+ s5p_mipi_dsi_enable_byte_clock(dsim, 1);
+
+ /* enable byte clk and escape clock */
+ s5p_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div);
+ /* escape clock on lane */
+ s5p_mipi_dsi_enable_esc_clk_on_lane(dsim,
+ (DSIM_LANE_CLOCK | dsim->data_lane), 1);
+
+ dev_dbg(dsim->dev, "byte clock is %luMHz\n",
+ (byte_clk / MHZ));
+ dev_dbg(dsim->dev, "escape clock that user's need is %lu\n",
+ (dsim->dsim_config->esc_clk / MHZ));
+ dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div);
+ dev_dbg(dsim->dev, "escape clock is %luMHz\n",
+ ((byte_clk / esc_div) / MHZ));
+
+ if ((byte_clk / esc_div) > escape_clk) {
+ esc_clk_error_rate = escape_clk /
+ (byte_clk / esc_div);
+ dev_warn(dsim->dev, "error rate is %lu over.\n",
+ (esc_clk_error_rate / 100));
+ } else if ((byte_clk / esc_div) < (escape_clk)) {
+ esc_clk_error_rate = (byte_clk / esc_div) /
+ escape_clk;
+ dev_warn(dsim->dev, "error rate is %lu under.\n",
+ (esc_clk_error_rate / 100));
+ }
+ } else {
+ s5p_mipi_dsi_enable_esc_clk_on_lane(dsim,
+ (DSIM_LANE_CLOCK | dsim->data_lane), 0);
+ s5p_mipi_dsi_set_esc_clk_prs(dsim, 0, 0);
+
+ /* disable escape clock. */
+ s5p_mipi_dsi_enable_byte_clock(dsim, 0);
+
+ if (byte_clk_sel = DSIM_PLL_OUT_DIV8)
+ s5p_mipi_dsi_pll_on(dsim, 0);
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim)
+{
+ dsim->state = DSIM_STATE_INIT;
+
+ switch (dsim->dsim_config->e_no_data_lane) {
+ case DSIM_DATA_LANE_1:
+ dsim->data_lane = DSIM_LANE_DATA0;
+ break;
+ case DSIM_DATA_LANE_2:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1;
+ break;
+ case DSIM_DATA_LANE_3:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+ DSIM_LANE_DATA2;
+ break;
+ case DSIM_DATA_LANE_4:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+ DSIM_LANE_DATA2 | DSIM_LANE_DATA3;
+ break;
+ default:
+ dev_info(dsim->dev, "data lane is invalid.\n");
+ return -EINVAL;
+ };
+
+ s5p_mipi_dsi_sw_reset(dsim);
+ s5p_mipi_dsi_func_reset(dsim);
+
+ s5p_mipi_dsi_dp_dn_swap(dsim, 0);
+
+ return 0;
+}
+
+void s5p_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim)
+{
+ unsigned int src = 0;
+
+ src = (INTSRC_SFR_FIFO_EMPTY | INTSRC_RX_DATA_DONE);
+ s5p_mipi_dsi_set_interrupt(dsim, src, 1);
+
+ src = 0;
+ src = ~(INTMSK_RX_DONE | INTMSK_FIFO_EMPTY);
+ s5p_mipi_dsi_set_interrupt_mask(dsim, src, 1);
+}
+
+int s5p_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ /* enable only frame done interrupt */
+ s5p_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable);
+
+ return 0;
+}
+
+void s5p_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+
+ /* consider Main display and Sub display. */
+
+ s5p_mipi_dsi_set_main_stand_by(dsim, enable);
+}
+
+int s5p_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_config)
+{
+ struct mipi_dsim_platform_data *dsim_pd;
+ struct fb_videomode *timing;
+
+ dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
+ timing = (struct fb_videomode *)dsim_pd->lcd_panel_info;
+
+ /* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */
+ if (dsim_config->e_interface = (u32) DSIM_VIDEO) {
+ if (dsim_config->auto_vertical_cnt = 0) {
+ s5p_mipi_dsi_set_main_disp_vporch(dsim,
+ dsim_config->cmd_allow,
+ timing->upper_margin,
+ timing->lower_margin);
+ s5p_mipi_dsi_set_main_disp_hporch(dsim,
+ timing->left_margin,
+ timing->right_margin);
+ s5p_mipi_dsi_set_main_disp_sync_area(dsim,
+ timing->vsync_len,
+ timing->hsync_len);
+ }
+ }
+
+ s5p_mipi_dsi_set_main_disp_resol(dsim, timing->xres,
+ timing->yres);
+
+ s5p_mipi_dsi_display_config(dsim, dsim_config);
+
+ dev_info(dsim->dev, "lcd panel => width = %d, height = %d\n",
+ timing->xres, timing->yres);
+
+ return 0;
+}
+
+int s5p_mipi_dsi_init_link(struct mipi_dsim_device *dsim)
+{
+ unsigned int time_out = 100;
+
+ switch (dsim->state) {
+ case DSIM_STATE_INIT:
+ s5p_mipi_dsi_init_fifo_pointer(dsim, 0x1f);
+
+ /* dsi configuration */
+ s5p_mipi_dsi_init_config(dsim);
+ s5p_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1);
+ s5p_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1);
+
+ /* set clock configuration */
+ s5p_mipi_dsi_set_clock(dsim, dsim->dsim_config->e_byte_clk, 1);
+
+ /* check clock and data lane state are stop state */
+ while (!(s5p_mipi_dsi_is_lane_state(dsim))) {
+ time_out--;
+ if (time_out = 0) {
+ dev_err(dsim->dev,
+ "DSI Master is not stop state.\n");
+ dev_err(dsim->dev,
+ "Check initialization process\n");
+
+ return -EINVAL;
+ }
+ }
+ if (time_out != 0) {
+ dev_info(dsim->dev,
+ "DSI Master driver has been completed.\n");
+ dev_info(dsim->dev, "DSI Master state is stop state\n");
+ }
+
+ dsim->state = DSIM_STATE_STOP;
+
+ /* BTA sequence counters */
+ s5p_mipi_dsi_set_stop_state_counter(dsim,
+ dsim->dsim_config->stop_holding_cnt);
+ s5p_mipi_dsi_set_bta_timeout(dsim,
+ dsim->dsim_config->bta_timeout);
+ s5p_mipi_dsi_set_lpdr_timeout(dsim,
+ dsim->dsim_config->rx_timeout);
+
+ return 0;
+ default:
+ dev_info(dsim->dev, "DSI Master is already init.\n");
+ return 0;
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim)
+{
+ if (dsim->state = DSIM_STATE_STOP) {
+ if (dsim->e_clk_src != DSIM_EXT_CLK_BYPASS) {
+ dsim->state = DSIM_STATE_HSCLKEN;
+
+ /* set LCDC and CPU transfer mode to HS. */
+ s5p_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
+ s5p_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
+
+ s5p_mipi_dsi_enable_hs_clock(dsim, 1);
+
+ return 0;
+ } else
+ dev_warn(dsim->dev,
+ "clock source is external bypass.\n");
+ } else
+ dev_warn(dsim->dev, "DSIM is not stop state.\n");
+
+ return 0;
+}
+
+int s5p_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int mode)
+{
+ if (mode) {
+ if (dsim->state != DSIM_STATE_HSCLKEN) {
+ dev_err(dsim->dev, "HS Clock lane is not enabled.\n");
+ return -EINVAL;
+ }
+
+ s5p_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
+ } else {
+ if (dsim->state = DSIM_STATE_INIT || dsim->state =
+ DSIM_STATE_ULPS) {
+ dev_err(dsim->dev,
+ "DSI Master is not STOP or HSDT state.\n");
+ return -EINVAL;
+ }
+
+ s5p_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
+{
+ return _s5p_mipi_dsi_get_frame_done_status(dsim);
+}
+
+int s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
+{
+ _s5p_mipi_dsi_clear_frame_done(dsim);
+
+ return 0;
+}
+
+int s5p_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
+ unsigned int val)
+{
+ int try = TRY_FIFO_CLEAR;
+
+ s5p_mipi_dsi_sw_reset_release(dsim);
+ s5p_mipi_dsi_func_reset(dsim);
+
+ do {
+ if (s5p_mipi_dsi_get_sw_reset_release(dsim)) {
+ s5p_mipi_dsi_init_interrupt(dsim);
+ dev_dbg(dsim->dev, "reset release done.\n");
+ return 0;
+ }
+ } while (--try);
+
+ dev_err(dsim->dev, "failed to clear dsim fifo.\n");
+ return -EAGAIN;
+}
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/s5p_mipi_dsi_common.h b/drivers/video/s5p_mipi_dsi_common.h
new file mode 100644
index 0000000..e1063e6
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_common.h
@@ -0,0 +1,46 @@
+/* linux/drivers/video/s5p_mipi_dsi_common.h
+ *
+ * Header file for Samsung SoC MIPI-DSI common driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S5P_MIPI_DSI_COMMON_H
+#define _S5P_MIPI_DSI_COMMON_H
+
+static DECLARE_COMPLETION(dsim_rd_comp);
+static DECLARE_COMPLETION(dsim_wr_comp);
+
+int s5p_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned char *data0, unsigned int data_size);
+int s5p_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf);
+irqreturn_t s5p_mipi_dsi_interrupt_handler(int irq, void *dev_id);
+void s5p_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+int s5p_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_info);
+int s5p_mipi_dsi_init_link(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int mode);
+int s5p_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+int s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
+
+extern struct fb_info *registered_fb[FB_MAX] __read_mostly;
+
+int s5p_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
+ unsigned int val);
+
+#endif /* _S5P_MIPI_DSI_COMMON_H */
diff --git a/drivers/video/s5p_mipi_dsi_lowlevel.c b/drivers/video/s5p_mipi_dsi_lowlevel.c
new file mode 100644
index 0000000..3af1e82
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_lowlevel.c
@@ -0,0 +1,627 @@
+/* linux/drivers/video/s5p_mipi_dsi_lowlevel.c
+ *
+ * Samsung SoC MIPI-DSI lowlevel driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/mipi_dsim.h>
+
+#include <mach/map.h>
+
+#include "s5p_mipi_dsi_regs.h"
+
+void s5p_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
+
+ reg |= DSIM_FUNCRST;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
+}
+
+void s5p_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
+
+ reg |= DSIM_SWRST;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
+}
+
+void s5p_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ reg |= INTSRC_SW_RST_RELEASE;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+int s5p_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim)
+{
+ return (readl(dsim->reg_base + S5P_DSIM_INTSRC)) &
+ INTSRC_SW_RST_RELEASE;
+}
+
+unsigned int s5p_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_INTMSK);
+
+ return reg;
+}
+
+void s5p_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
+ unsigned int mode, unsigned int mask)
+{
+ unsigned int reg = 0;
+
+ if (mask)
+ reg |= mode;
+ else
+ reg &= ~mode;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTMSK);
+}
+
+void s5p_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
+ unsigned int cfg)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_FIFOCTRL);
+
+ writel(reg & ~(cfg), dsim->reg_base + S5P_DSIM_FIFOCTRL);
+ mdelay(10);
+ reg |= cfg;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_FIFOCTRL);
+}
+
+/*
+ * this function set PLL P, M and S value in D-PHY
+ */
+void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+ unsigned int value)
+{
+ writel(DSIM_AFC_CTL(value), dsim->reg_base + S5P_DSIM_PHYACCHR);
+}
+
+void s5p_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_MDRESOL);
+
+ reg &= ~DSIM_MAIN_STAND_BY;
+
+ if (enable)
+ reg |= DSIM_MAIN_STAND_BY;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+}
+
+void s5p_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int width_resol, unsigned int height_resol)
+{
+ unsigned int reg;
+
+ /* standby should be set after configuration so set to not ready*/
+ reg = (readl(dsim->reg_base + S5P_DSIM_MDRESOL)) &
+ ~(DSIM_MAIN_STAND_BY);
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+
+ reg &= ~((0x7ff << 16) | (0x7ff << 0));
+ reg |= DSIM_MAIN_VRESOL(height_resol) | DSIM_MAIN_HRESOL(width_resol);
+
+ reg |= DSIM_MAIN_STAND_BY;
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+}
+
+void s5p_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
+ unsigned int cmd_allow, unsigned int vfront, unsigned int vback)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MVPORCH)) &
+ ~((DSIM_CMD_ALLOW_MASK) | (DSIM_STABLE_VFP_MASK) |
+ (DSIM_MAIN_VBP_MASK));
+
+ reg |= ((cmd_allow & 0xf) << DSIM_CMD_ALLOW_SHIFT) |
+ ((vfront & 0x7ff) << DSIM_STABLE_VFP_SHIFT) |
+ ((vback & 0x7ff) << DSIM_MAIN_VBP_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MVPORCH);
+}
+
+void s5p_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
+ unsigned int front, unsigned int back)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MHPORCH)) &
+ ~((DSIM_MAIN_HFP_MASK) | (DSIM_MAIN_HBP_MASK));
+
+ reg |= (front << DSIM_MAIN_HFP_SHIFT) | (back << DSIM_MAIN_HBP_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MHPORCH);
+}
+
+void s5p_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MSYNC)) &
+ ~((DSIM_MAIN_VSA_MASK) | (DSIM_MAIN_HSA_MASK));
+
+ reg |= ((vert & 0x3ff) << DSIM_MAIN_VSA_SHIFT) |
+ (hori << DSIM_MAIN_HSA_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MSYNC);
+}
+
+void s5p_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_SDRESOL)) &
+ ~(DSIM_SUB_STANDY_MASK);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+
+ reg &= ~(DSIM_SUB_VRESOL_MASK) | ~(DSIM_SUB_HRESOL_MASK);
+ reg |= ((vert & 0x7ff) << DSIM_SUB_VRESOL_SHIFT) |
+ ((hori & 0x7ff) << DSIM_SUB_HRESOL_SHIFT);
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+
+ reg |= (1 << DSIM_SUB_STANDY_SHIFT);
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+}
+
+void s5p_mipi_dsi_init_config(struct mipi_dsim_device *dsim)
+{
+ struct mipi_dsim_config *dsim_config = dsim->dsim_config;
+
+ unsigned int cfg = (readl(dsim->reg_base + S5P_DSIM_CONFIG)) &
+ ~((1 << 28) | (0x1f << 20) | (0x3 << 5));
+
+ cfg = (dsim_config->auto_flush << 29) |
+ (dsim_config->eot_disable << 28) |
+ (dsim_config->auto_vertical_cnt << DSIM_AUTO_MODE_SHIFT) |
+ (dsim_config->hse << DSIM_HSE_MODE_SHIFT) |
+ (dsim_config->hfp << DSIM_HFP_MODE_SHIFT) |
+ (dsim_config->hbp << DSIM_HBP_MODE_SHIFT) |
+ (dsim_config->hsa << DSIM_HSA_MODE_SHIFT) |
+ (dsim_config->e_no_data_lane << DSIM_NUM_OF_DATALANE_SHIFT);
+
+ writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_config)
+{
+ u32 reg = (readl(dsim->reg_base + S5P_DSIM_CONFIG)) &
+ ~((0x3 << 26) | (1 << 25) | (0x3 << 18) | (0x7 << 12) |
+ (0x3 << 16) | (0x7 << 8));
+
+ if (dsim_config->e_interface = DSIM_VIDEO)
+ reg |= (1 << 25);
+ else if (dsim_config->e_interface = DSIM_COMMAND)
+ reg &= ~(1 << 25);
+ else {
+ dev_err(dsim->dev, "unknown lcd type.\n");
+ return;
+ }
+
+ /* main lcd */
+ reg |= ((u8) (dsim_config->e_burst_mode) & 0x3) << 26 |
+ ((u8) (dsim_config->e_virtual_ch) & 0x3) << 18 |
+ ((u8) (dsim_config->e_pixel_format) & 0x7) << 12;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
+ unsigned int enable)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_CONFIG);
+
+ if (enable)
+ reg |= DSIM_LANE_ENx(lane);
+ else
+ reg &= ~DSIM_LANE_ENx(lane);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+
+void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+ unsigned int count)
+{
+ unsigned int cfg;
+
+ /* get the data lane number. */
+ cfg = DSIM_NUM_OF_DATA_LANE(count);
+
+ writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
+ unsigned int afc_code)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR);
+
+ if (enable) {
+ reg |= (1 << 14);
+ reg &= ~(0x7 << 5);
+ reg |= (afc_code & 0x7) << 5;
+ } else
+ reg &= ~(1 << 14);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR);
+}
+
+void s5p_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_PLL_BYPASS_EXTERNAL);
+
+ reg |= enable << DSIM_PLL_BYPASS_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
+ unsigned int m, unsigned int s)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PLLCTRL);
+
+ reg |= ((p & 0x3f) << 13) | ((m & 0x1ff) << 4) | ((s & 0x7) << 1);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
+ unsigned int freq_band)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x1f << DSIM_FREQ_BAND_SHIFT);
+
+ reg |= ((freq_band & 0x1f) << DSIM_FREQ_BAND_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x7ffff << 1);
+
+ reg |= (pre_divider & 0x3f) << 13 | (main_divider & 0x1ff) << 4 |
+ (scaler & 0x7) << 1;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
+ unsigned int lock_time)
+{
+ writel(lock_time, dsim->reg_base + S5P_DSIM_PLLTMR);
+}
+
+void s5p_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim, unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x1 << DSIM_PLL_EN_SHIFT);
+
+ reg |= ((enable & 0x1) << DSIM_PLL_EN_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
+ unsigned int src)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(0x3 << DSIM_BYTE_CLK_SRC_SHIFT);
+
+ reg |= ((unsigned int) src) << DSIM_BYTE_CLK_SRC_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(1 << DSIM_BYTE_CLKEN_SHIFT);
+
+ reg |= enable << DSIM_BYTE_CLKEN_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
+ unsigned int enable, unsigned int prs_val)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~((1 << DSIM_ESC_CLKEN_SHIFT) | (0xffff));
+
+ reg |= enable << DSIM_ESC_CLKEN_SHIFT;
+ if (enable)
+ reg |= prs_val;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
+ unsigned int lane_sel, unsigned int enable)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_CLKCTRL);
+
+ if (enable)
+ reg |= DSIM_LANE_ESC_CLKEN(lane_sel);
+ else
+
+ reg &= ~DSIM_LANE_ESC_CLKEN(lane_sel);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE)) &
+ ~(0x1 << DSIM_FORCE_STOP_STATE_SHIFT);
+
+ reg |= ((enable & 0x1) << DSIM_FORCE_STOP_STATE_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+unsigned int s5p_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
+
+ /**
+ * check clock and data lane states.
+ * if MIPI-DSI controller was enabled at bootloader then
+ * TX_READY_HS_CLK is enabled otherwise STOP_STATE_CLK.
+ * so it should be checked for two case.
+ */
+ if ((reg & DSIM_STOP_STATE_DAT(0xf)) &&
+ ((reg & DSIM_STOP_STATE_CLK) ||
+ (reg & DSIM_TX_READY_HS_CLK)))
+ return 1;
+ else
+ return 0;
+
+ return 0;
+}
+
+void s5p_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
+ unsigned int cnt_val)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE)) &
+ ~(0x7ff << DSIM_STOP_STATE_CNT_SHIFT);
+
+ reg |= ((cnt_val & 0x7ff) << DSIM_STOP_STATE_CNT_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT)) &
+ ~(0xff << DSIM_BTA_TOUT_SHIFT);
+
+ reg |= (timeout << DSIM_BTA_TOUT_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
+}
+
+void s5p_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT)) &
+ ~(0xffff << DSIM_LPDR_TOUT_SHIFT);
+
+ reg |= (timeout << DSIM_LPDR_TOUT_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
+}
+
+void s5p_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
+
+ reg &= ~DSIM_CMD_LPDT_LP;
+
+ if (lp)
+ reg |= DSIM_CMD_LPDT_LP;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
+
+ reg &= ~DSIM_TX_LPDT_LP;
+
+ if (lp)
+ reg |= DSIM_TX_LPDT_LP;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(1 << DSIM_TX_REQUEST_HSCLK_SHIFT);
+
+ reg |= enable << DSIM_TX_REQUEST_HSCLK_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
+ unsigned int swap_en)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR1);
+
+ reg &= ~(0x3 << 0);
+ reg |= (swap_en & 0x3) << 0;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR1);
+}
+
+void s5p_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
+ unsigned int hs_zero)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0xf << 28);
+
+ reg |= ((hs_zero & 0xf) << 28);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x7 << 20);
+
+ reg |= ((prep & 0x7) << 20);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+unsigned int s5p_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim)
+{
+ return readl(dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+void s5p_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ reg |= src;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+void s5p_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src, unsigned int enable)
+{
+ unsigned int reg = 0;
+
+ if (enable)
+ reg |= src;
+ else
+ reg &= ~src;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+unsigned int s5p_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
+
+ return reg & (1 << 31) ? 1 : 0;
+}
+
+unsigned int s5p_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim)
+{
+ unsigned int ret;
+
+ ret = readl(dsim->reg_base + S5P_DSIM_FIFOCTRL) & ~(0x1f);
+
+ return ret;
+}
+
+void s5p_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim,
+ unsigned int di, unsigned int data0, unsigned int data1)
+{
+ unsigned int reg = (data1 << 16) | (data0 << 8) | ((di & 0x3f) << 0);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
+}
+
+void s5p_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
+ unsigned int di, unsigned int data0)
+{
+ unsigned int reg = (data0 << 8) | (di << 0);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
+}
+
+unsigned int s5p_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = 0;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_RXFIFO);
+
+ return reg;
+}
+
+unsigned int _s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ return (reg & INTSRC_FRAME_DONE) ? 1 : 0;
+}
+
+void _s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ writel(reg | INTSRC_FRAME_DONE, dsim->reg_base +
+ S5P_DSIM_INTSRC);
+}
+
+void s5p_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
+ unsigned int tx_data)
+{
+ writel(tx_data, dsim->reg_base + S5P_DSIM_PAYLOAD);
+}
diff --git a/drivers/video/s5p_mipi_dsi_lowlevel.h b/drivers/video/s5p_mipi_dsi_lowlevel.h
new file mode 100644
index 0000000..da3a63e
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_lowlevel.h
@@ -0,0 +1,112 @@
+/* linux/drivers/video/s5p_mipi_dsi_lowlevel.h
+ *
+ * Header file for Samsung SoC MIPI-DSI lowlevel driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S5P_MIPI_DSI_LOWLEVEL_H
+#define _S5P_MIPI_DSI_LOWLEVEL_H
+
+void s5p_mipi_dsi_func_reset(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
+ unsigned int mode, unsigned int mask);
+void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+ unsigned int count);
+void s5p_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
+ unsigned int cfg);
+void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+ unsigned int value);
+void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+ unsigned int value);
+void s5p_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int width_resol, unsigned int height_resol);
+void s5p_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
+ unsigned int cmd_allow, unsigned int vfront, unsigned int vback);
+void s5p_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
+ unsigned int front, unsigned int back);
+void s5p_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori);
+void s5p_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori);
+void s5p_mipi_dsi_init_config(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_config);
+void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+ unsigned int count);
+void s5p_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
+ unsigned int enable);
+void s5p_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
+ unsigned int afc_code);
+void s5p_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
+ unsigned int m, unsigned int s);
+void s5p_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
+ unsigned int freq_band);
+void s5p_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler);
+void s5p_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
+ unsigned int lock_time);
+void s5p_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
+ unsigned int src);
+void s5p_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
+ unsigned int enable, unsigned int prs_val);
+void s5p_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
+ unsigned int lane_sel, unsigned int enable);
+void s5p_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+unsigned int s5p_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
+ unsigned int cnt_val);
+void s5p_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout);
+void s5p_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout);
+void s5p_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp);
+void s5p_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp);
+void s5p_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
+ unsigned int swap_en);
+void s5p_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
+ unsigned int hs_zero);
+void s5p_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep);
+unsigned int s5p_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim);
+unsigned int s5p_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src);
+void s5p_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src, unsigned int enable);
+unsigned int s5p_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim);
+unsigned int s5p_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim);
+unsigned int _s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
+void _s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, unsigned int di,
+ unsigned int data0, unsigned int data1);
+void s5p_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
+ unsigned int tx_data);
+void s5p_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
+ unsigned int data0, unsigned int data1);
+unsigned int s5p_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim);
+
+#endif /* _S5P_MIPI_DSI_LOWLEVEL_H */
diff --git a/drivers/video/s5p_mipi_dsi_regs.h b/drivers/video/s5p_mipi_dsi_regs.h
new file mode 100644
index 0000000..3ad0fe3
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_regs.h
@@ -0,0 +1,156 @@
+/* linux/driver/video/s5p_mipi_dsi_regs.h
+ *
+ * Register definition file for Samsung MIPI-DSIM driver
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _REGS_DSIM_H
+#define _REGS_DSIM_H
+
+#define S5P_DSIM_STATUS (0x0) /* Status register */
+#define S5P_DSIM_SWRST (0x4) /* Software reset register */
+#define S5P_DSIM_CLKCTRL (0x8) /* Clock control register */
+#define S5P_DSIM_TIMEOUT (0xc) /* Time out register */
+#define S5P_DSIM_CONFIG (0x10) /* Configuration register */
+#define S5P_DSIM_ESCMODE (0x14) /* Escape mode register */
+
+/* Main display image resolution register */
+#define S5P_DSIM_MDRESOL (0x18)
+#define S5P_DSIM_MVPORCH (0x1c) /* Main display Vporch register */
+#define S5P_DSIM_MHPORCH (0x20) /* Main display Hporch register */
+#define S5P_DSIM_MSYNC (0x24) /* Main display sync area register */
+
+/* Sub display image resolution register */
+#define S5P_DSIM_SDRESOL (0x28)
+#define S5P_DSIM_INTSRC (0x2c) /* Interrupt source register */
+#define S5P_DSIM_INTMSK (0x30) /* Interrupt mask register */
+#define S5P_DSIM_PKTHDR (0x34) /* Packet Header FIFO register */
+#define S5P_DSIM_PAYLOAD (0x38) /* Payload FIFO register */
+#define S5P_DSIM_RXFIFO (0x3c) /* Read FIFO register */
+#define S5P_DSIM_FIFOTHLD (0x40) /* FIFO threshold level register */
+#define S5P_DSIM_FIFOCTRL (0x44) /* FIFO status and control register */
+
+/* FIFO memory AC characteristic register */
+#define S5P_DSIM_PLLCTRL (0x4c) /* PLL control register */
+#define S5P_DSIM_PLLTMR (0x50) /* PLL timer register */
+#define S5P_DSIM_PHYACCHR (0x54) /* D-PHY AC characteristic register */
+#define S5P_DSIM_PHYACCHR1 (0x58) /* D-PHY AC characteristic register1 */
+
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK (1 << 8)
+#define DSIM_TX_READY_HS_CLK (1 << 10)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST (1 << 16)
+#define DSIM_SWRST (1 << 0)
+
+/* S5P_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT (0)
+#define DSIM_BTA_TOUT_SHIFT (16)
+
+/* S5P_DSIM_CLKCTRL */
+#define DSIM_LANE_ESC_CLKEN_SHIFT (19)
+#define DSIM_BYTE_CLKEN_SHIFT (24)
+#define DSIM_BYTE_CLK_SRC_SHIFT (25)
+#define DSIM_PLL_BYPASS_SHIFT (27)
+#define DSIM_ESC_CLKEN_SHIFT (28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT (31)
+#define DSIM_LANE_ESC_CLKEN(x) (((x) & 0x1f) << \
+ DSIM_LANE_ESC_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_ENABLE (1 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_DISABLE (0 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_PLL_BYPASS_EXTERNAL (1 << DSIM_PLL_BYPASS_SHIFT)
+#define DSIM_ESC_CLKEN_ENABLE (1 << DSIM_ESC_CLKEN_SHIFT)
+#define DSIM_ESC_CLKEN_DISABLE (0 << DSIM_ESC_CLKEN_SHIFT)
+
+/* S5P_DSIM_CONFIG */
+#define DSIM_NUM_OF_DATALANE_SHIFT (5)
+#define DSIM_HSA_MODE_SHIFT (20)
+#define DSIM_HBP_MODE_SHIFT (21)
+#define DSIM_HFP_MODE_SHIFT (22)
+#define DSIM_HSE_MODE_SHIFT (23)
+#define DSIM_AUTO_MODE_SHIFT (24)
+#define DSIM_LANE_ENx(x) (((x) & 0x1f) << 0)
+
+#define DSIM_NUM_OF_DATA_LANE(x) ((x) << DSIM_NUM_OF_DATALANE_SHIFT)
+
+/* S5P_DSIM_ESCMODE */
+#define DSIM_TX_LPDT_SHIFT (6)
+#define DSIM_CMD_LPDT_SHIFT (7)
+#define DSIM_TX_LPDT_LP (1 << DSIM_TX_LPDT_SHIFT)
+#define DSIM_CMD_LPDT_LP (1 << DSIM_CMD_LPDT_SHIFT)
+#define DSIM_STOP_STATE_CNT_SHIFT (21)
+#define DSIM_FORCE_STOP_STATE_SHIFT (20)
+
+/* S5P_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY (1 << 31)
+#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0)
+
+/* S5P_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT (28)
+#define DSIM_STABLE_VFP_SHIFT (16)
+#define DSIM_MAIN_VBP_SHIFT (0)
+#define DSIM_CMD_ALLOW_MASK (0xf << DSIM_CMD_ALLOW_SHIFT)
+#define DSIM_STABLE_VFP_MASK (0x7ff << DSIM_STABLE_VFP_SHIFT)
+#define DSIM_MAIN_VBP_MASK (0x7ff << DSIM_MAIN_VBP_SHIFT)
+
+/* S5P_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT (16)
+#define DSIM_MAIN_HBP_SHIFT (0)
+#define DSIM_MAIN_HFP_MASK ((0xffff) << DSIM_MAIN_HFP_SHIFT)
+#define DSIM_MAIN_HBP_MASK ((0xffff) << DSIM_MAIN_HBP_SHIFT)
+
+/* S5P_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT (22)
+#define DSIM_MAIN_HSA_SHIFT (0)
+#define DSIM_MAIN_VSA_MASK ((0x3ff) << DSIM_MAIN_VSA_SHIFT)
+#define DSIM_MAIN_HSA_MASK ((0xffff) << DSIM_MAIN_HSA_SHIFT)
+
+/* S5P_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT (31)
+#define DSIM_SUB_VRESOL_SHIFT (16)
+#define DSIM_SUB_HRESOL_SHIFT (0)
+#define DSIM_SUB_STANDY_MASK ((0x1) << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_VRESOL_MASK ((0x7ff) << DSIM_SUB_VRESOL_SHIFT)
+#define DSIM_SUB_HRESOL_MASK ((0x7ff) << DSIM_SUB_HRESOL_SHIFT)
+
+/* S5P_DSIM_INTSRC */
+#define INTSRC_PLL_STABLE (1 << 31)
+#define INTSRC_SW_RST_RELEASE (1 << 30)
+#define INTSRC_SFR_FIFO_EMPTY (1 << 29)
+#define INTSRC_FRAME_DONE (1 << 24)
+#define INTSRC_RX_DATA_DONE (1 << 18)
+
+/* S5P_DSIM_INTMSK */
+#define INTMSK_FIFO_EMPTY (1 << 29)
+#define INTMSK_BTA (1 << 25)
+#define INTMSK_FRAME_DONE (1 << 24)
+#define INTMSK_RX_TIMEOUT (1 << 21)
+#define INTMSK_BTA_TIMEOUT (1 << 20)
+#define INTMSK_RX_DONE (1 << 18)
+#define INTMSK_RX_TE (1 << 17)
+#define INTMSK_RX_ACK (1 << 16)
+#define INTMSK_RX_ECC_ERR (1 << 15)
+#define INTMSK_RX_CRC_ERR (1 << 14)
+
+/* S5P_DSIM_FIFOCTRL */
+#define SFR_HEADER_EMPTY (1 << 22)
+
+/* S5P_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5)
+
+/* S5P_DSIM_PLLCTRL */
+#define DSIM_PLL_EN_SHIFT (23)
+#define DSIM_FREQ_BAND_SHIFT (24)
+
+#endif /* _REGS_DSIM_H */
diff --git a/include/linux/mipi_dsim.h b/include/linux/mipi_dsim.h
new file mode 100644
index 0000000..a6d3b01
--- /dev/null
+++ b/include/linux/mipi_dsim.h
@@ -0,0 +1,361 @@
+/* include/linux/mipi_dsim.h
+ *
+ * Platform data header for Samsung SoC MIPI-DSIM.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _LINUX_MIPI_DSIM_H
+#define _LINUX_MIPI_DSIM_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE (32)
+
+/*
+ * enumurate display interface type.
+ *
+ * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
+ *
+ * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
+ * for main display and CPU Interface(same as I80 Interface) for main
+ * and sub display.
+ */
+enum mipi_dsim_interface_type {
+ DSIM_COMMAND,
+ DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+ DSIM_VIRTUAL_CH_0,
+ DSIM_VIRTUAL_CH_1,
+ DSIM_VIRTUAL_CH_2,
+ DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+ DSIM_NON_BURST_SYNC_EVENT,
+ DSIM_BURST_SYNC_EVENT,
+ DSIM_NON_BURST_SYNC_PULSE,
+ DSIM_BURST,
+ DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+ DSIM_DATA_LANE_1,
+ DSIM_DATA_LANE_2,
+ DSIM_DATA_LANE_3,
+ DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+ DSIM_PLL_OUT_DIV8,
+ DSIM_EXT_CLK_DIV8,
+ DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+ DSIM_CMD_3BPP,
+ DSIM_CMD_8BPP,
+ DSIM_CMD_12BPP,
+ DSIM_CMD_16BPP,
+ DSIM_VID_16BPP_565,
+ DSIM_VID_18BPP_666PACKED,
+ DSIM_18BPP_666LOOSELYPACKED,
+ DSIM_24BPP_888
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ * in Video mode, the vertical line transition uses line counter
+ * configured by VSA, VBP, and Vertical resolution.
+ * If this bit is set to '1', the line counter does not use VSA and VBP
+ * registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ * start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ * (in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ * if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ * if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ * if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @cma_allow: specifies the number of horizontal lines, where command packet
+ * transmission is allowed after Stable VFP period.
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ * sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ * in Non-burst mode, RGB data area is filled with RGB data and NULL
+ * packets, according to input bandwidth of RGB interface.
+ * In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ * clock(System clock cycle base)
+ * if the timer value goes to 0x00000000, the clock stable bit of status
+ * and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ * prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ * read packet(or write "set_tear_on" command) and BTA request.
+ * after transmitting read packet or write "set_tear_on" command,
+ * BTA requests to D-PHY automatically. this counter value specifies
+ * the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ * this register specifies time out from BTA request to change
+ * the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ * this register specifies time out on how long RxValid deasserts,
+ * after RxLpdt asserts with respect to Tx escape clock.
+ * - RxValid specifies Rx data valid indicator.
+ * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ * - RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+ unsigned char auto_flush;
+ unsigned char eot_disable;
+
+ unsigned char auto_vertical_cnt;
+ unsigned char hse;
+ unsigned char hfp;
+ unsigned char hbp;
+ unsigned char hsa;
+ unsigned char cmd_allow;
+
+ enum mipi_dsim_interface_type e_interface;
+ enum mipi_dsim_virtual_ch_no e_virtual_ch;
+ enum mipi_dsim_pixel_format e_pixel_format;
+ enum mipi_dsim_burst_mode_type e_burst_mode;
+ enum mipi_dsim_no_of_data_lane e_no_data_lane;
+ enum mipi_dsim_byte_clk_src e_byte_clk;
+
+ /*
+ * =====================+ * | P | M | S | MHz |
+ * -------------------------------------------
+ * | 3 | 100 | 3 | 100 |
+ * | 3 | 100 | 2 | 200 |
+ * | 3 | 63 | 1 | 252 |
+ * | 4 | 100 | 1 | 300 |
+ * | 4 | 110 | 1 | 330 |
+ * | 12 | 350 | 1 | 350 |
+ * | 3 | 100 | 1 | 400 |
+ * | 4 | 150 | 1 | 450 |
+ * | 6 | 118 | 1 | 472 |
+ * | 3 | 120 | 1 | 480 |
+ * | 12 | 250 | 0 | 500 |
+ * | 4 | 100 | 0 | 600 |
+ * | 3 | 81 | 0 | 648 |
+ * | 3 | 88 | 0 | 704 |
+ * | 3 | 90 | 0 | 720 |
+ * | 3 | 100 | 0 | 800 |
+ * | 12 | 425 | 0 | 850 |
+ * | 4 | 150 | 0 | 900 |
+ * | 12 | 475 | 0 | 950 |
+ * | 6 | 250 | 0 | 1000 |
+ * -------------------------------------------
+ */
+
+ /*
+ * pms could be calculated as the following.
+ * M * 24 / P * 2 ^ S = MHz
+ */
+ unsigned char p;
+ unsigned short m;
+ unsigned char s;
+
+ unsigned int pll_stable_time;
+ unsigned long esc_clk;
+
+ unsigned short stop_holding_cnt;
+ unsigned char bta_timeout;
+ unsigned short rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @id: unique device id.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ * (virtual address)
+ * @lock: the mutex protecting this data structure.
+ * @dsim_info: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ * (it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ * (it would be registered by mipi-dsi driver.)
+ * @lcd_info: pointer to mipi_lcd_info structure.
+ * @power_t: current power status.
+ * @state: specifies status of MIPI-DSI controller.
+ * the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ * this variable would be set by driver according to e_no_data_lane
+ * automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+ struct device *dev;
+ int id;
+ struct resource *res;
+ struct clk *clock;
+ unsigned int irq;
+ void __iomem *reg_base;
+ struct mutex lock;
+
+ struct mipi_dsim_config *dsim_config;
+ struct mipi_dsim_master_ops *master_ops;
+ struct mipi_dsim_lcd_device *dsim_lcd_dev;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+ atomic_t power_t;
+ unsigned int state;
+ unsigned int data_lane;
+ unsigned int e_clk_src;
+ bool suspended;
+
+ struct mipi_dsim_platform_data *pd;
+};
+
+/*
+ * struct mipi_dsim_platform_data - interface to platform data
+ * for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ * lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @enabled: indicate whether mipi controller got enabled or not.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ * this structure specifies width, height, timing and polarity and so on.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct mipi_dsim_platform_data {
+ char lcd_panel_name[PANEL_NAME_SIZE];
+
+ struct mipi_dsim_config *dsim_config;
+ unsigned int enabled;
+ void *lcd_panel_info;
+
+ int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ * transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ * - this one would be used only in case of CPU mode.
+ * @set_early_blank_mode: set framebuffer blank mode.
+ * - this callback should be called prior to fb_blank() by a client driver
+ * only if needing.
+ * @set_blank_mode: set framebuffer blank mode.
+ * - this callback should be called after fb_blank() by a client driver
+ * only if needing.
+ */
+
+struct mipi_dsim_master_ops {
+ int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned char *data0, unsigned int data1);
+ int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf);
+ int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+ int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+ int (*get_fb_frame_done)(struct fb_info *info);
+ void (*trigger)(struct fb_info *info);
+ int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
+ int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ * alias for that name.
+ * @dev: driver model representation of the device.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ * and this bus id should be same as id of mipi_dsim_device.
+ * @irq: irq number for signaling when framebuffer transfer of
+ * lcd panel module is completed.
+ * this irq would be used only for MIPI-DSI based CPU mode lcd panel.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+ char *name;
+ struct device dev;
+ int id;
+ int bus_id;
+ int irq;
+
+ struct mipi_dsim_device *master;
+ void *platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ * alias for that name.
+ * @id: id of driver to be registered.
+ * this id would be used for finding device object registered.
+ */
+struct mipi_dsim_lcd_driver {
+ char *name;
+ int id;
+
+ void (*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
+ void (*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*probe)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*remove)(struct mipi_dsim_lcd_device *dsim_dev);
+ void (*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*resume)(struct mipi_dsim_lcd_device *dsim_dev);
+};
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int s5p_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+ *lcd_dev);
+/**
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int s5p_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+ *lcd_drv);
+#endif /* _LINUX_MIPI_DSIM_H */
--
1.7.4.1
^ permalink raw reply related
* Re: linux-next: build warning after merge of the fbdev tree
From: Laurent Pinchart @ 2011-12-20 10:37 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Florian Tobias Schandinat, linux-fbdev, linux-next, linux-kernel
In-Reply-To: <20111220163214.351b13b464c46f506f329b30@canb.auug.org.au>
Hi Stephen,
On Tuesday 20 December 2011 06:32:14 Stephen Rothwell wrote:
> Hi all,
>
> After merging the fbdev tree, today's linux-next build (powerpc
> ppc64_defconfig) produced this warning:
>
> drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around scalar
> initializer [enabled by default]
> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near initialization
> for 'vesafb_defined.colorspace') [enabled by default]
> drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements in
> scalar initializer [enabled by default]
> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near initialization
> for 'vesafb_defined.colorspace') [enabled by default]
> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around scalar
> initializer [enabled by default]
> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near initialization
> for 'matroxfb_dh_defined.colorspace') [enabled by default]
> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements in
> scalar initializer [enabled by default]
> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near initialization
> for 'matroxfb_dh_defined.colorspace') [enabled by default]
>
> Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
> configuration API").
The following patch should fix the issue. Florian, are you fine with it, or
would you rather modify the initializers to be name-based ?
From 078987fc14dba806fc1bc628e3e5c371db3cf1b8 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 20 Dec 2011 11:30:53 +0100
Subject: [PATCH] fbdev: matroxfb: Fix compilation after fb_var_screeninfo change
Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
modified the layout of the fb_var_screeninfo structure. Update the
static initializers in the matroxfb driver accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/video/matrox/matroxfb_base.c | 2 +-
drivers/video/matrox/matroxfb_crtc2.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 44bf8d4..f98aad5 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -147,7 +147,7 @@ static struct fb_var_screeninfo vesafb_defined = {
39721L,48L,16L,33L,10L,
96L,2L,~0, /* No sync info */
FB_VMODE_NONINTERLACED,
- 0, {0,0,0,0,0}
+ 0, 0, {0,0,0,0}
};
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index d7112c3..d0c1abc 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -593,7 +593,7 @@ static struct fb_var_screeninfo matroxfb_dh_defined = {
39721L,48L,16L,33L,10L,
96L,2,0, /* no sync info */
FB_VMODE_NONINTERLACED,
- 0, {0,0,0,0,0}
+ 0, 0, {0,0,0,0}
};
static int matroxfb_dh_regit(const struct matrox_fb_info *minfo,
--
Regards,
Laurent Pinchart
^ permalink raw reply related
* Re: [PATCH V2 0/2] OMAPDSS: DISPC: Peformance improvement of DISPC Scaling
From: Mahapatra, Chandrabhanu @ 2011-12-20 12:28 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
In-Reply-To: <1324370169.2042.2.camel@deskari>
On Tue, Dec 20, 2011 at 2:06 PM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> On Mon, 2011-12-19 at 14:03 +0530, Chandrabhanu Mahapatra wrote:
>> Hi everyone,
>> the following patch set directs to improve the scaling performance of DISPC
>> module which consists of two pacthes.
>>
>> The first patch is based on code of Lajos Molnar <lajos@ti.com> from Android
>> Kernel, which updates the code with new set of coefficients to improve the
>> scaling performance.
>>
>> The second patch is based on some very valuable suggestions by
>> Sebastien Fagard <s-fagard@ti.com> and directs to modify the clock
>> requirements for scaling to support OMAP4 and avoid clock failure issues.
>>
>> I have tested these patches on OMAP2, OMAP3 AND OMAP4. To test on 2430SDP
>> board I have created a patch to enable the display which will follow later.
>>
>> All your comments and suggestions are welcome.
>
> Thanks, this looks good. Applied to DSS master branch. There was a minor
> conflict with the Makefile, but I fixed that.
>
> Btw, when doing new versions of a patch series, it would be good to have
> a short history of the series in the introduction email, so that the
> reviewers can easily see what's new in each version.
>
> Tomi
>
Thanks Tomi ! Its a good idea to including history of the series in
the introduction. I will do so in further patches to come.
--
Chandrabhanu Mahapatra
Texas Instruments India Pvt. Ltd.
^ permalink raw reply
* Re: linux-next: build warning after merge of the fbdev tree
From: Geert Uytterhoeven @ 2011-12-20 13:48 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Stephen Rothwell, Florian Tobias Schandinat, linux-fbdev,
linux-next, linux-kernel
In-Reply-To: <201112201137.12003.laurent.pinchart@ideasonboard.com>
On Tue, Dec 20, 2011 at 11:37, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Tuesday 20 December 2011 06:32:14 Stephen Rothwell wrote:
>> After merging the fbdev tree, today's linux-next build (powerpc
>> ppc64_defconfig) produced this warning:
>>
>> drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around scalar
>> initializer [enabled by default]
>> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near initialization
>> for 'vesafb_defined.colorspace') [enabled by default]
>> drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements in
>> scalar initializer [enabled by default]
>> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near initialization
>> for 'vesafb_defined.colorspace') [enabled by default]
>> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around scalar
>> initializer [enabled by default]
>> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near initialization
>> for 'matroxfb_dh_defined.colorspace') [enabled by default]
>> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements in
>> scalar initializer [enabled by default]
>> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near initialization
>> for 'matroxfb_dh_defined.colorspace') [enabled by default]
>>
>> Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
>> configuration API").
>
> The following patch should fix the issue. Florian, are you fine with it, or
> would you rather modify the initializers to be name-based ?
>
> From 078987fc14dba806fc1bc628e3e5c371db3cf1b8 Mon Sep 17 00:00:00 2001
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Date: Tue, 20 Dec 2011 11:30:53 +0100
> Subject: [PATCH] fbdev: matroxfb: Fix compilation after fb_var_screeninfo change
>
> Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
> modified the layout of the fb_var_screeninfo structure. Update the
> static initializers in the matroxfb driver accordingly.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/video/matrox/matroxfb_base.c | 2 +-
> drivers/video/matrox/matroxfb_crtc2.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
> index 44bf8d4..f98aad5 100644
> --- a/drivers/video/matrox/matroxfb_base.c
> +++ b/drivers/video/matrox/matroxfb_base.c
> @@ -147,7 +147,7 @@ static struct fb_var_screeninfo vesafb_defined = {
> 39721L,48L,16L,33L,10L,
> 96L,2L,~0, /* No sync info */
> FB_VMODE_NONINTERLACED,
> - 0, {0,0,0,0,0}
> + 0, 0, {0,0,0,0}
All these zeroes should not be specified, the compiler will do the
right thing for
static variables anyway.
Else they have to be updated manually everytime one of the reserved fields
is consumed for a new feature.
> };
>
>
> diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
> index d7112c3..d0c1abc 100644
> --- a/drivers/video/matrox/matroxfb_crtc2.c
> +++ b/drivers/video/matrox/matroxfb_crtc2.c
> @@ -593,7 +593,7 @@ static struct fb_var_screeninfo matroxfb_dh_defined = {
> 39721L,48L,16L,33L,10L,
> 96L,2,0, /* no sync info */
> FB_VMODE_NONINTERLACED,
> - 0, {0,0,0,0,0}
> + 0, 0, {0,0,0,0}
Same here.
> };
>
> static int matroxfb_dh_regit(const struct matrox_fb_info *minfo,
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: linux-next: build warning after merge of the fbdev tree
From: Laurent Pinchart @ 2011-12-20 15:19 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Stephen Rothwell, Florian Tobias Schandinat, linux-fbdev,
linux-next, linux-kernel
In-Reply-To: <CAMuHMdU5iRf4HUS5i_ibJxvHGcszdF+ZXmwMCWsXvr4k8DjPHQ@mail.gmail.com>
Hi Geert,
On Tuesday 20 December 2011 14:48:33 Geert Uytterhoeven wrote:
> On Tue, Dec 20, 2011 at 11:37, Laurent Pinchart wrote:
> > On Tuesday 20 December 2011 06:32:14 Stephen Rothwell wrote:
> >> After merging the fbdev tree, today's linux-next build (powerpc
> >> ppc64_defconfig) produced this warning:
> >>
> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around
> >> scalar initializer [enabled by default]
> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements in
> >> scalar initializer [enabled by default]
> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around
> >> scalar initializer [enabled by default]
> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
> >> default]
> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements in
> >> scalar initializer [enabled by default]
> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
> >> default]
> >>
> >> Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
> >> configuration API").
> >
> > The following patch should fix the issue. Florian, are you fine with it,
> > or would you rather modify the initializers to be name-based ?
> >
> > From 078987fc14dba806fc1bc628e3e5c371db3cf1b8 Mon Sep 17 00:00:00 2001
> > From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Date: Tue, 20 Dec 2011 11:30:53 +0100
> > Subject: [PATCH] fbdev: matroxfb: Fix compilation after fb_var_screeninfo
> > change
> >
> > Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
> > modified the layout of the fb_var_screeninfo structure. Update the
> > static initializers in the matroxfb driver accordingly.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > drivers/video/matrox/matroxfb_base.c | 2 +-
> > drivers/video/matrox/matroxfb_crtc2.c | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/video/matrox/matroxfb_base.c
> > b/drivers/video/matrox/matroxfb_base.c index 44bf8d4..f98aad5 100644
> > --- a/drivers/video/matrox/matroxfb_base.c
> > +++ b/drivers/video/matrox/matroxfb_base.c
> > @@ -147,7 +147,7 @@ static struct fb_var_screeninfo vesafb_defined = {
> > 39721L,48L,16L,33L,10L,
> > 96L,2L,~0, /* No sync info */
> > FB_VMODE_NONINTERLACED,
> > - 0, {0,0,0,0,0}
> > + 0, 0, {0,0,0,0}
>
> All these zeroes should not be specified, the compiler will do the
> right thing for
> static variables anyway.
>
> Else they have to be updated manually everytime one of the reserved fields
> is consumed for a new feature.
I agree. Should I just remove them, or switch the structures to named
initializers while I'm at it ?
> > };
> >
> >
> > diff --git a/drivers/video/matrox/matroxfb_crtc2.c
> > b/drivers/video/matrox/matroxfb_crtc2.c index d7112c3..d0c1abc 100644
> > --- a/drivers/video/matrox/matroxfb_crtc2.c
> > +++ b/drivers/video/matrox/matroxfb_crtc2.c
> > @@ -593,7 +593,7 @@ static struct fb_var_screeninfo matroxfb_dh_defined > > { 39721L,48L,16L,33L,10L,
> > 96L,2,0, /* no sync info */
> > FB_VMODE_NONINTERLACED,
> > - 0, {0,0,0,0,0}
> > + 0, 0, {0,0,0,0}
>
> Same here.
>
> > };
> >
> > static int matroxfb_dh_regit(const struct matrox_fb_info *minfo,
--
Regards,
Laurent Pinchart
^ permalink raw reply
* Re: linux-next: build warning after merge of the fbdev tree
From: Geert Uytterhoeven @ 2011-12-20 15:24 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Stephen Rothwell, Florian Tobias Schandinat, linux-fbdev,
linux-next, linux-kernel
In-Reply-To: <201112201619.43001.laurent.pinchart@ideasonboard.com>
Hi Laurent,
On Tue, Dec 20, 2011 at 16:19, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Tuesday 20 December 2011 14:48:33 Geert Uytterhoeven wrote:
>> On Tue, Dec 20, 2011 at 11:37, Laurent Pinchart wrote:
>> > On Tuesday 20 December 2011 06:32:14 Stephen Rothwell wrote:
>> >> After merging the fbdev tree, today's linux-next build (powerpc
>> >> ppc64_defconfig) produced this warning:
>> >>
>> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around
>> >> scalar initializer [enabled by default]
>> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
>> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
>> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements in
>> >> scalar initializer [enabled by default]
>> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
>> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
>> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around
>> >> scalar initializer [enabled by default]
>> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
>> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
>> >> default]
>> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements in
>> >> scalar initializer [enabled by default]
>> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
>> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
>> >> default]
>> >>
>> >> Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
>> >> configuration API").
>> >
>> > The following patch should fix the issue. Florian, are you fine with it,
>> > or would you rather modify the initializers to be name-based ?
>> >
>> > From 078987fc14dba806fc1bc628e3e5c371db3cf1b8 Mon Sep 17 00:00:00 2001
>> > From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> > Date: Tue, 20 Dec 2011 11:30:53 +0100
>> > Subject: [PATCH] fbdev: matroxfb: Fix compilation after fb_var_screeninfo
>> > change
>> >
>> > Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
>> > modified the layout of the fb_var_screeninfo structure. Update the
>> > static initializers in the matroxfb driver accordingly.
>> >
>> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> > ---
>> > drivers/video/matrox/matroxfb_base.c | 2 +-
>> > drivers/video/matrox/matroxfb_crtc2.c | 2 +-
>> > 2 files changed, 2 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/video/matrox/matroxfb_base.c
>> > b/drivers/video/matrox/matroxfb_base.c index 44bf8d4..f98aad5 100644
>> > --- a/drivers/video/matrox/matroxfb_base.c
>> > +++ b/drivers/video/matrox/matroxfb_base.c
>> > @@ -147,7 +147,7 @@ static struct fb_var_screeninfo vesafb_defined = {
>> > 39721L,48L,16L,33L,10L,
>> > 96L,2L,~0, /* No sync info */
>> > FB_VMODE_NONINTERLACED,
>> > - 0, {0,0,0,0,0}
>> > + 0, 0, {0,0,0,0}
>>
>> All these zeroes should not be specified, the compiler will do the
>> right thing for
>> static variables anyway.
>>
>> Else they have to be updated manually everytime one of the reserved fields
>> is consumed for a new feature.
>
> I agree. Should I just remove them, or switch the structures to named
> initializers while I'm at it ?
I would just remove them. What do they buy you?
Even with named initializers
.reserved = { 0, 0, 0, 0 }
will break once we consume one more reserved field, unless you write
.reserved = { 0, }
to let the compiler handle it, but then you could just not specify the
field at all.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: linux-next: build warning after merge of the fbdev tree
From: Laurent Pinchart @ 2011-12-20 15:42 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Stephen Rothwell, Florian Tobias Schandinat, linux-fbdev,
linux-next, linux-kernel
In-Reply-To: <CAMuHMdVx+T8X3tkP+OVM-sxKLeJdsuz=0jBSxuNte_5JK4vTBQ@mail.gmail.com>
Hi Geert,
On Tuesday 20 December 2011 16:24:30 Geert Uytterhoeven wrote:
> On Tue, Dec 20, 2011 at 16:19, Laurent Pinchart wrote:
> > On Tuesday 20 December 2011 14:48:33 Geert Uytterhoeven wrote:
> >> On Tue, Dec 20, 2011 at 11:37, Laurent Pinchart wrote:
> >> > On Tuesday 20 December 2011 06:32:14 Stephen Rothwell wrote:
> >> >> After merging the fbdev tree, today's linux-next build (powerpc
> >> >> ppc64_defconfig) produced this warning:
> >> >>
> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around
> >> >> scalar initializer [enabled by default]
> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
> >> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements
> >> >> in scalar initializer [enabled by default]
> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
> >> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around
> >> >> scalar initializer [enabled by default]
> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
> >> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
> >> >> default]
> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements
> >> >> in scalar initializer [enabled by default]
> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
> >> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
> >> >> default]
> >> >>
> >> >> Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
> >> >> configuration API").
> >> >
> >> > The following patch should fix the issue. Florian, are you fine with
> >> > it, or would you rather modify the initializers to be name-based ?
> >> >
> >> > From 078987fc14dba806fc1bc628e3e5c371db3cf1b8 Mon Sep 17 00:00:00 2001
> >> > From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >> > Date: Tue, 20 Dec 2011 11:30:53 +0100
> >> > Subject: [PATCH] fbdev: matroxfb: Fix compilation after
> >> > fb_var_screeninfo change
> >> >
> >> > Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration
> >> > API") modified the layout of the fb_var_screeninfo structure. Update
> >> > the static initializers in the matroxfb driver accordingly.
> >> >
> >> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >> > ---
> >> > drivers/video/matrox/matroxfb_base.c | 2 +-
> >> > drivers/video/matrox/matroxfb_crtc2.c | 2 +-
> >> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/drivers/video/matrox/matroxfb_base.c
> >> > b/drivers/video/matrox/matroxfb_base.c index 44bf8d4..f98aad5 100644
> >> > --- a/drivers/video/matrox/matroxfb_base.c
> >> > +++ b/drivers/video/matrox/matroxfb_base.c
> >> > @@ -147,7 +147,7 @@ static struct fb_var_screeninfo vesafb_defined = {
> >> > 39721L,48L,16L,33L,10L,
> >> > 96L,2L,~0, /* No sync info */
> >> > FB_VMODE_NONINTERLACED,
> >> > - 0, {0,0,0,0,0}
> >> > + 0, 0, {0,0,0,0}
> >>
> >> All these zeroes should not be specified, the compiler will do the
> >> right thing for
> >> static variables anyway.
> >>
> >> Else they have to be updated manually everytime one of the reserved
> >> fields is consumed for a new feature.
> >
> > I agree. Should I just remove them, or switch the structures to named
> > initializers while I'm at it ?
>
> I would just remove them. What do they buy you?
>
> Even with named initializers
>
> .reserved = { 0, 0, 0, 0 }
>
> will break once we consume one more reserved field, unless you write
>
> .reserved = { 0, }
>
> to let the compiler handle it, but then you could just not specify the
> field at all.
Sure. In both cases I would remove them, but I was wondering if I should
switch the whole structure to named initializers in addition to removing them.
I don't know if the common practice to solve issues in the -next tree is to
apply patches that are as little intrusive as possible, or if bigger patches
are allowed.
--
Regards,
Laurent Pinchart
^ permalink raw reply
* Re: linux-next: build warning after merge of the fbdev tree
From: Geert Uytterhoeven @ 2011-12-20 15:48 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Stephen Rothwell, Florian Tobias Schandinat, linux-fbdev,
linux-next, linux-kernel
In-Reply-To: <201112201642.15822.laurent.pinchart@ideasonboard.com>
Hi Laurent,
On Tue, Dec 20, 2011 at 16:42, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> On Tuesday 20 December 2011 16:24:30 Geert Uytterhoeven wrote:
>> On Tue, Dec 20, 2011 at 16:19, Laurent Pinchart wrote:
>> > On Tuesday 20 December 2011 14:48:33 Geert Uytterhoeven wrote:
>> >> On Tue, Dec 20, 2011 at 11:37, Laurent Pinchart wrote:
>> >> > On Tuesday 20 December 2011 06:32:14 Stephen Rothwell wrote:
>> >> >> After merging the fbdev tree, today's linux-next build (powerpc
>> >> >> ppc64_defconfig) produced this warning:
>> >> >>
>> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: braces around
>> >> >> scalar initializer [enabled by default]
>> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
>> >> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
>> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: excess elements
>> >> >> in scalar initializer [enabled by default]
>> >> >> drivers/video/matrox/matroxfb_base.c:150:2: warning: (near
>> >> >> initialization for 'vesafb_defined.colorspace') [enabled by default]
>> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: braces around
>> >> >> scalar initializer [enabled by default]
>> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
>> >> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
>> >> >> default]
>> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: excess elements
>> >> >> in scalar initializer [enabled by default]
>> >> >> drivers/video/matrox/matroxfb_crtc2.c:596:3: warning: (near
>> >> >> initialization for 'matroxfb_dh_defined.colorspace') [enabled by
>> >> >> default]
>> >> >>
>> >> >> Introduced by commit fb21c2f42879 ("fbdev: Add FOURCC-based format
>> >> >> configuration API").
>> >> >
>> >> > The following patch should fix the issue. Florian, are you fine with
>> >> > it, or would you rather modify the initializers to be name-based ?
>> >> >
>> >> > From 078987fc14dba806fc1bc628e3e5c371db3cf1b8 Mon Sep 17 00:00:00 2001
>> >> > From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> >> > Date: Tue, 20 Dec 2011 11:30:53 +0100
>> >> > Subject: [PATCH] fbdev: matroxfb: Fix compilation after
>> >> > fb_var_screeninfo change
>> >> >
>> >> > Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration
>> >> > API") modified the layout of the fb_var_screeninfo structure. Update
>> >> > the static initializers in the matroxfb driver accordingly.
>> >> >
>> >> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> >> > ---
>> >> > drivers/video/matrox/matroxfb_base.c | 2 +-
>> >> > drivers/video/matrox/matroxfb_crtc2.c | 2 +-
>> >> > 2 files changed, 2 insertions(+), 2 deletions(-)
>> >> >
>> >> > diff --git a/drivers/video/matrox/matroxfb_base.c
>> >> > b/drivers/video/matrox/matroxfb_base.c index 44bf8d4..f98aad5 100644
>> >> > --- a/drivers/video/matrox/matroxfb_base.c
>> >> > +++ b/drivers/video/matrox/matroxfb_base.c
>> >> > @@ -147,7 +147,7 @@ static struct fb_var_screeninfo vesafb_defined = {
>> >> > 39721L,48L,16L,33L,10L,
>> >> > 96L,2L,~0, /* No sync info */
>> >> > FB_VMODE_NONINTERLACED,
>> >> > - 0, {0,0,0,0,0}
>> >> > + 0, 0, {0,0,0,0}
>> >>
>> >> All these zeroes should not be specified, the compiler will do the
>> >> right thing for
>> >> static variables anyway.
>> >>
>> >> Else they have to be updated manually everytime one of the reserved
>> >> fields is consumed for a new feature.
>> >
>> > I agree. Should I just remove them, or switch the structures to named
>> > initializers while I'm at it ?
>>
>> I would just remove them. What do they buy you?
>>
>> Even with named initializers
>>
>> .reserved = { 0, 0, 0, 0 }
>>
>> will break once we consume one more reserved field, unless you write
>>
>> .reserved = { 0, }
>>
>> to let the compiler handle it, but then you could just not specify the
>> field at all.
>
> Sure. In both cases I would remove them, but I was wondering if I should
> switch the whole structure to named initializers in addition to removing them.
> I don't know if the common practice to solve issues in the -next tree is to
> apply patches that are as little intrusive as possible, or if bigger patches
> are allowed.
I'd fix the build error first.
The conversion to named initializers can be separate cleanup patch.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* [PATCH] fbdev: matroxfb: Fix compilation after fb_var_screeninfo change
From: Laurent Pinchart @ 2011-12-20 19:00 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Stephen Rothwell, Florian Tobias Schandinat, linux-fbdev,
linux-next, linux-kernel
Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
modified the layout of the fb_var_screeninfo structure. Remove zero
fields from the static initializers in the matroxfb driver accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/video/matrox/matroxfb_base.c | 1 -
drivers/video/matrox/matroxfb_crtc2.c | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 44bf8d4..401a56e 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -147,7 +147,6 @@ static struct fb_var_screeninfo vesafb_defined = {
39721L,48L,16L,33L,10L,
96L,2L,~0, /* No sync info */
FB_VMODE_NONINTERLACED,
- 0, {0,0,0,0,0}
};
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
index d7112c3..02796a4 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/matrox/matroxfb_crtc2.c
@@ -593,7 +593,6 @@ static struct fb_var_screeninfo matroxfb_dh_defined = {
39721L,48L,16L,33L,10L,
96L,2,0, /* no sync info */
FB_VMODE_NONINTERLACED,
- 0, {0,0,0,0,0}
};
static int matroxfb_dh_regit(const struct matrox_fb_info *minfo,
--
Regards,
Laurent Pinchart
^ permalink raw reply related
* Re: [PATCH] video: backlight: support MIPI DSI based s6e8ax0 amoled
From: Andrew Morton @ 2011-12-20 22:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <4EF04096.30903@samsung.com>
On Tue, 20 Dec 2011 17:00:22 +0900
Donghwa Lee <dh09.lee@samsung.com> wrote:
>
> This patch is amoled panel driver based MIPI DSI interface.
> S6E8AX0 means it may includes many other ldi controllers, for example,
> S6E8AA0, S6E8AB0, and so on.
> It can be modified depending on each panel properites.
>
> This patch is based on Samsung Soc MIPI DSI Driver.
> Please refer to the "[PATCH v3] video: support MIPI-DSI controller driver".
>
> http://marc.info/?l=linux-fbdev&m\x132435297125837&w=2
>
It's difficult when interdependent patches are spread around different
mailing lists, different patch series and even different maintainers.
I suggest that you send *all* the patches as a single patch series,
cc'ing all relevant individuals and mailing lists on all patches. That
way, a single person (perhaps me) can merge all the patches in a single
unit.
> +config LCD_S6E8AX0
> + tristate "S6E8AX0 MIPI AMOLED LCD Driver"
> + depends on S5P_MIPI_DSI && BACKLIGHT_CLASS_DEVICE
See, I don't have S5P_MIPI_DSI so I can't even compile-test this.
> + default n
> + help
> + If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
> + LCD control driver.
> endif # LCD_CLASS_DEVICE
>
> #
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index fdd1fc4..6adba58 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
> obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
> obj-$(CONFIG_LCD_LD9040) += ld9040.o
> obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
> +obj-$(CONFIG_LCD_S6E8AX0) += s6e8ax0.o
>
> obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
> obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
> diff --git a/drivers/video/backlight/s6e8ax0.c b/drivers/video/backlight/s6e8ax0.c
> new file mode 100644
> index 0000000..2fb303e
> --- /dev/null
> +++ b/drivers/video/backlight/s6e8ax0.c
> @@ -0,0 +1,801 @@
> +/* linux/drivers/video/s6e8ax0.c
> + *
> + * MIPI-DSI based s6e8ax0 AMOLED lcd 4.65 inch panel driver.
> + *
> + * Inki Dae, <inki.dae@samsung.com>
> + * Donghwa Lee, <dh09.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/mutex.h>
> +#include <linux/wait.h>
> +#include <linux/ctype.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/lcd.h>
> +#include <linux/fb.h>
> +#include <linux/backlight.h>
> +#include <linux/mipi_dsim.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include "s6e8ax0_gamma.h"
> +
> +#define LDI_MTP_LENGTH 24
> +#define DSIM_PM_STABLE_TIME (10)
> +#define MIN_BRIGHTNESS (0)
> +#define MAX_BRIGHTNESS (24)
> +
> +#define POWER_IS_ON(pwr) ((pwr) = FB_BLANK_UNBLANK)
> +#define POWER_IS_OFF(pwr) ((pwr) = FB_BLANK_POWERDOWN)
> +#define POWER_IS_NRM(pwr) ((pwr) = FB_BLANK_NORMAL)
> +
> +#define lcd_to_master(a) (a->dsim_dev->master)
> +#define lcd_to_master_ops(a) ((lcd_to_master(a))->master_ops)
These two can (and hence should) be implemented as nice type-checked C
functions.
> +static void s6e8ax0_panel_cond(struct s6e8ax0 *lcd)
> +{
> + struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
> +
> + unsigned char data_to_send[] = {
> + 0xf8, 0x3d, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c,
> + 0x7d, 0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20,
> + 0x04, 0x08, 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08,
> + 0x23, 0x23, 0xc0, 0xc8, 0x08, 0x48, 0xc1, 0x00, 0xc1,
> + 0xff, 0xff, 0xc8
> + };
> +
> + ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
> + data_to_send, ARRAY_SIZE(data_to_send));
> +}
It should be possible to make data_to_send[] static const. That will
save quite a lot of runtime overhead and space. It will require that
mipi_dsim_master_ops.cmd_write() take a const pointer.
> +static void s6e8ax0_display_cond(struct s6e8ax0 *lcd)
> +{
> + struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
> + unsigned char data_to_send[] = {
> + 0xf2, 0x80, 0x03, 0x0d
> + };
Ditto.
> + ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
> + data_to_send, ARRAY_SIZE(data_to_send));
> +}
> +
> +/* Gamma 2.2 Setting (200cd, 7500K, 10MPCD) */
> +static void s6e8ax0_gamma_cond(struct s6e8ax0 *lcd)
> +{
> + struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
> + unsigned int gamma = lcd->bd->props.brightness;
> +
> + ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
> + s6e8ax0_22_gamma_table[gamma], GAMMA_TABLE_COUNT);
> +}
> +
> +static void s6e8ax0_gamma_update(struct s6e8ax0 *lcd)
> +{
> + struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
> + unsigned char data_to_send[] = {
> + 0xf7, 0x03
> + };
And many more.
>
> ...
>
> +static void s6e8ax0_power_on(struct mipi_dsim_lcd_device *dsim_dev, int power)
> +{
> + struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
> +
> + mdelay(lcd->ddi_pd->power_on_delay);
> +
> + /* lcd power on */
> + if (power)
> + s6e8ax0_regulator_enable(lcd);
> + else
> + s6e8ax0_regulator_disable(lcd);
> +
> + mdelay(lcd->ddi_pd->reset_delay);
> +
> + /* lcd reset */
> + if (lcd->ddi_pd->reset)
> + lcd->ddi_pd->reset(lcd->ld);
> + mdelay(5);
> +}
This driver uses mdelay() a lot. It would be far better to use
msleep() where possible. Please check all the mdelay() sites, see
which ones can be converted?
> --- /dev/null
> +++ b/drivers/video/backlight/s6e8ax0_gamma.h
> @@ -0,0 +1,217 @@
> +/* linux/drivers/video/backlight/s6e8ax0_brightness.h
> + *
> + * Brightness level definition.
> + *
> + * Copyright (c) 2011 Samsung Electronics
> + *
> + * Inki Dae, <inki.dae@samsung.com>
> + * Donghwa Lee <dh09.lee@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#ifndef _S6E8AX0_BRIGHTNESS_H
> +#define _S6E8AX0_BRIGHTNESS_H
> +
> +#define MAX_GAMMA_LEVEL 25
> +#define GAMMA_TABLE_COUNT 26
> +
> +static unsigned char s6e8ax0_22_gamma_30[] = {
> + 0xFA, 0x01, 0x60, 0x10, 0x60, 0xF5, 0x00, 0xFF, 0xAD, 0xAF,
> + 0xBA, 0xC3, 0xD8, 0xC5, 0x9F, 0xC6, 0x9E, 0xC1, 0xDC, 0xC0,
> + 0x00, 0x61, 0x00, 0x5A, 0x00, 0x74,
> +};
No, please don't define data in a header file.
See, if this header gets included by two or more .c files then the
kernel contains two or more copies of the data. And if this header
*isn't* included in two or more header files then there was no point in
putting the data in a header file!
So either a) move this data into the .c file which uses it or b) put it
into a .c file, remove the "static" and add declarations to a header
file.
>
> ...
>
^ permalink raw reply
* [PATCH v5 0/2] video: support MIPI-DSI controller driver
From: Donghwa Lee @ 2011-12-21 4:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and LCD panel
based on MIPI-DSI could be used with it.
This patch set includes MIPI-DSI master driver and MIPI-DSI slave amoled panel
driver.
It consists of the flowing patches.
[PATCH v5 1/2]video: support MIPI-DSI controller driver
[PATCH v5 2/2]video: backlight: support s6e8ax0 panel driver based on MIPI DSI
Changes since v4:
- include s6e8ax0 amoled panel driver based on MIPI DSI
- remove compile warnings and useless code
Best regards,
Donghwa LEE
^ permalink raw reply
* [PATCH v5 1/2] video: support MIPI-DSI controller driver
From: Donghwa Lee @ 2011-12-21 4:24 UTC (permalink / raw)
To: linux-arm-kernel
This patch supports MIPI-DSI controller driver based on Samsung SoC chip.
LCD panel driver based on MIPI-DSI should be registered to MIPI-DSI
driver at machine code and LCD panel driver's specific function registered
to mipi_dsim_ddi structure at lcd panel init function called system init.
In the MIPI-DSI driver, find lcd panel driver by using registered lcd
panel name, and then initialize lcd panel driver.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/video/Kconfig | 6 +
drivers/video/Makefile | 2 +
drivers/video/s5p_mipi_dsi.c | 612 ++++++++++++++++++++++
drivers/video/s5p_mipi_dsi_common.c | 896 +++++++++++++++++++++++++++++++++
drivers/video/s5p_mipi_dsi_common.h | 46 ++
drivers/video/s5p_mipi_dsi_lowlevel.c | 617 +++++++++++++++++++++++
drivers/video/s5p_mipi_dsi_lowlevel.h | 112 ++++
drivers/video/s5p_mipi_dsi_regs.h | 149 ++++++
include/linux/mipi_dsim.h | 359 +++++++++++++
9 files changed, 2799 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/s5p_mipi_dsi.c
create mode 100644 drivers/video/s5p_mipi_dsi_common.c
create mode 100644 drivers/video/s5p_mipi_dsi_common.h
create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.c
create mode 100644 drivers/video/s5p_mipi_dsi_lowlevel.h
create mode 100644 drivers/video/s5p_mipi_dsi_regs.h
create mode 100644 include/linux/mipi_dsim.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d83e967..bdc382e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2082,6 +2082,12 @@ config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config S5P_MIPI_DSI
+ tristate "Samsung SoC MIPI-DSI support."
+ depends on FB_S3C && (ARCH_S5PV210 || ARCH_EXYNOS)
+ help
+ This enables support for MIPI-DSI device.
+
config FB_NUC900
bool "NUC900 LCD framebuffer support"
depends on FB && ARCH_W90X900
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 9b9d8ff..29eb7c9 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -120,6 +120,8 @@ obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
+obj-$(CONFIG_S5P_MIPI_DSI) += s5p_mipi_dsi.o s5p_mipi_dsi_common.o \
+ s5p_mipi_dsi_lowlevel.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
diff --git a/drivers/video/s5p_mipi_dsi.c b/drivers/video/s5p_mipi_dsi.c
new file mode 100644
index 0000000..c66842d
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi.c
@@ -0,0 +1,612 @@
+/* linux/drivers/video/s5p_mipi_dsi.c
+ *
+ * Samsung SoC MIPI-DSIM driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/notifier.h>
+#include <linux/mipi_dsim.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/fb.h>
+
+#include "s5p_mipi_dsi_common.h"
+#include "s5p_mipi_dsi_lowlevel.h"
+
+#define master_to_driver(a) (a->dsim_lcd_drv)
+#define master_to_device(a) (a->dsim_lcd_dev)
+#define dev_to_dsim(a) platform_get_drvdata(to_platform_device(a))
+
+struct mipi_dsim_ddi {
+ int bus_id;
+ struct list_head list;
+ struct mipi_dsim_lcd_device *dsim_lcd_dev;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+};
+
+static LIST_HEAD(dsim_ddi_list);
+
+static DEFINE_MUTEX(mipi_dsim_lock);
+
+static struct mipi_dsim_platform_data *to_dsim_plat(struct platform_device *pdev)
+{
+ return pdev->dev.platform_data;
+}
+
+static struct regulator_bulk_data supplies[] = {
+ { .supply = "vdd10", },
+ { .supply = "vdd18", },
+};
+
+static int s5p_mipi_regulator_enable(struct mipi_dsim_device *dsim)
+{
+ int ret;
+
+ mutex_lock(&dsim->lock);
+ ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+ mutex_unlock(&dsim->lock);
+
+ return ret;
+}
+
+static int s5p_mipi_regulator_disable(struct mipi_dsim_device *dsim)
+{
+ int ret;
+
+ mutex_lock(&dsim->lock);
+ ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+ mutex_unlock(&dsim->lock);
+
+ return ret;
+}
+
+/* update all register settings to MIPI DSI controller. */
+static void s5p_mipi_update_cfg(struct mipi_dsim_device *dsim)
+{
+ /*
+ * data from Display controller(FIMD) is not transferred in video mode
+ * but in case of command mode, all settings is not updated to
+ * registers.
+ */
+ s5p_mipi_dsi_stand_by(dsim, 0);
+
+ s5p_mipi_dsi_init_dsim(dsim);
+ s5p_mipi_dsi_init_link(dsim);
+
+ s5p_mipi_dsi_set_hs_enable(dsim);
+
+ /* set display timing. */
+ s5p_mipi_dsi_set_display_mode(dsim, dsim->dsim_config);
+
+ /*
+ * data from Display controller(FIMD) is transferred in video mode
+ * but in case of command mode, all settigs is updated to registers.
+ */
+ s5p_mipi_dsi_stand_by(dsim, 1);
+}
+
+static int s5p_mipi_dsi_early_blank_mode(struct mipi_dsim_device *dsim,
+ int power)
+{
+ struct mipi_dsim_lcd_driver *client_drv = master_to_driver(dsim);
+ struct mipi_dsim_lcd_device *client_dev = master_to_device(dsim);
+
+ switch (power) {
+ case FB_BLANK_POWERDOWN:
+ if (dsim->suspended)
+ return 0;
+
+ if (client_drv && client_drv->suspend)
+ client_drv->suspend(client_dev);
+
+ clk_disable(dsim->clock);
+
+ s5p_mipi_regulator_disable(dsim);
+
+ dsim->suspended = true;
+
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int s5p_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
+{
+ struct platform_device *pdev = to_platform_device(dsim->dev);
+ struct mipi_dsim_lcd_driver *client_drv = master_to_driver(dsim);
+ struct mipi_dsim_lcd_device *client_dev = master_to_device(dsim);
+
+ switch (power) {
+ case FB_BLANK_UNBLANK:
+ if (!dsim->suspended)
+ return 0;
+
+ /* lcd panel power on. */
+ if (client_drv && client_drv->power_on)
+ client_drv->power_on(client_dev, 1);
+
+ s5p_mipi_regulator_disable(dsim);
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, true);
+
+ clk_enable(dsim->clock);
+
+ s5p_mipi_update_cfg(dsim);
+
+ /* set lcd panel sequence commands. */
+ if (client_drv && client_drv->set_sequence)
+ client_drv->set_sequence(client_dev);
+
+ dsim->suspended = false;
+
+ break;
+ case FB_BLANK_NORMAL:
+ /* TODO. */
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev)
+{
+ struct mipi_dsim_ddi *dsim_ddi;
+
+ if (!lcd_dev) {
+ pr_err("mipi_dsim_lcd_device is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!lcd_dev->name) {
+ pr_err("dsim_lcd_device name is NULL.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi = kzalloc(sizeof(struct mipi_dsim_ddi), GFP_KERNEL);
+ if (!dsim_ddi) {
+ pr_err("failed to allocate dsim_ddi object.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi->dsim_lcd_dev = lcd_dev;
+
+ mutex_lock(&mipi_dsim_lock);
+ list_add_tail(&dsim_ddi->list, &dsim_ddi_list);
+ mutex_unlock(&mipi_dsim_lock);
+
+ return 0;
+}
+
+struct mipi_dsim_ddi
+ *s5p_mipi_dsi_find_lcd_device(struct mipi_dsim_lcd_driver *lcd_drv)
+{
+ struct mipi_dsim_ddi *dsim_ddi, *next;
+ struct mipi_dsim_lcd_device *lcd_dev;
+
+ mutex_lock(&mipi_dsim_lock);
+
+ list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+ if (!dsim_ddi)
+ goto out;
+
+ lcd_dev = dsim_ddi->dsim_lcd_dev;
+ if (!lcd_dev)
+ continue;
+
+ if ((strcmp(lcd_drv->name, lcd_dev->name)) = 0) {
+ /**
+ * bus_id would be used to identify
+ * connected bus.
+ */
+ dsim_ddi->bus_id = lcd_dev->bus_id;
+ mutex_unlock(&mipi_dsim_lock);
+
+ return dsim_ddi;
+ }
+
+ list_del(&dsim_ddi->list);
+ kfree(dsim_ddi);
+ }
+
+out:
+ mutex_unlock(&mipi_dsim_lock);
+
+ return NULL;
+}
+
+int s5p_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver *lcd_drv)
+{
+ struct mipi_dsim_ddi *dsim_ddi;
+
+ if (!lcd_drv) {
+ pr_err("mipi_dsim_lcd_driver is NULL.\n");
+ return -EFAULT;
+ }
+
+ if (!lcd_drv->name) {
+ pr_err("dsim_lcd_driver name is NULL.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi = s5p_mipi_dsi_find_lcd_device(lcd_drv);
+ if (!dsim_ddi) {
+ pr_err("mipi_dsim_ddi object not found.\n");
+ return -EFAULT;
+ }
+
+ dsim_ddi->dsim_lcd_drv = lcd_drv;
+
+ pr_info("registered panel driver(%s) to mipi-dsi driver.\n",
+ lcd_drv->name);
+
+ return 0;
+
+}
+
+struct mipi_dsim_ddi
+ *s5p_mipi_dsi_bind_lcd_ddi(struct mipi_dsim_device *dsim,
+ const char *name)
+{
+ struct mipi_dsim_ddi *dsim_ddi, *next;
+ struct mipi_dsim_lcd_driver *lcd_drv;
+ struct mipi_dsim_lcd_device *lcd_dev;
+ int ret;
+
+ mutex_lock(&dsim->lock);
+
+ list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+ lcd_drv = dsim_ddi->dsim_lcd_drv;
+ lcd_dev = dsim_ddi->dsim_lcd_dev;
+ if (!lcd_drv || !lcd_dev ||
+ (dsim->id != dsim_ddi->bus_id))
+ continue;
+
+ dev_dbg(dsim->dev, "lcd_drv->id = %d, lcd_dev->id = %d\n",
+ lcd_drv->id, lcd_dev->id);
+ dev_dbg(dsim->dev, "lcd_dev->bus_id = %d, dsim->id = %d\n",
+ lcd_dev->bus_id, dsim->id);
+
+ if ((strcmp(lcd_drv->name, name) = 0)) {
+ lcd_dev->master = dsim;
+
+ lcd_dev->dev.parent = dsim->dev;
+ dev_set_name(&lcd_dev->dev, "%s", lcd_drv->name);
+
+ ret = device_register(&lcd_dev->dev);
+ if (ret < 0) {
+ dev_err(dsim->dev,
+ "can't register %s, status %d\n",
+ dev_name(&lcd_dev->dev), ret);
+ mutex_unlock(&dsim->lock);
+
+ return NULL;
+ }
+
+ dsim->dsim_lcd_dev = lcd_dev;
+ dsim->dsim_lcd_drv = lcd_drv;
+
+ mutex_unlock(&dsim->lock);
+
+ return dsim_ddi;
+ }
+ }
+
+ mutex_unlock(&dsim->lock);
+
+ return NULL;
+}
+
+/* define MIPI-DSI Master operations. */
+static struct mipi_dsim_master_ops master_ops = {
+ .cmd_read = s5p_mipi_dsi_rd_data,
+ .cmd_write = s5p_mipi_dsi_wr_data,
+ .get_dsim_frame_done = s5p_mipi_dsi_get_frame_done_status,
+ .clear_dsim_frame_done = s5p_mipi_dsi_clear_frame_done,
+ .set_early_blank_mode = s5p_mipi_dsi_early_blank_mode,
+ .set_blank_mode = s5p_mipi_dsi_blank_mode,
+};
+
+static int s5p_mipi_dsi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct mipi_dsim_device *dsim;
+ struct mipi_dsim_config *dsim_config;
+ struct mipi_dsim_platform_data *dsim_pd;
+ struct mipi_dsim_ddi *dsim_ddi;
+ int ret = -EINVAL;
+
+ dsim = kzalloc(sizeof(struct mipi_dsim_device), GFP_KERNEL);
+ if (!dsim) {
+ dev_err(&pdev->dev, "failed to allocate dsim object.\n");
+ return -EFAULT;
+ }
+
+ dsim->pd = to_dsim_plat(pdev);
+ dsim->dev = &pdev->dev;
+ dsim->id = pdev->id;
+
+ /* get mipi_dsim_platform_data. */
+ dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
+ if (dsim_pd = NULL) {
+ dev_err(&pdev->dev, "failed to get platform data for dsim.\n");
+ goto err_clock_get;
+ }
+ /* get mipi_dsim_config. */
+ dsim_config = dsim_pd->dsim_config;
+ if (dsim_config = NULL) {
+ dev_err(&pdev->dev, "failed to get dsim config data.\n");
+ goto err_clock_get;
+ }
+
+ dsim->dsim_config = dsim_config;
+ dsim->master_ops = &master_ops;
+
+ mutex_init(&dsim->lock);
+
+ ret = regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies), supplies);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get regulators: %d\n", ret);
+ goto err_clock_get;
+ }
+
+ dsim->clock = clk_get(&pdev->dev, "dsim0");
+ if (IS_ERR(dsim->clock)) {
+ dev_err(&pdev->dev, "failed to get dsim clock source\n");
+ goto err_clock_get;
+ }
+
+ clk_enable(dsim->clock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get io memory region\n");
+ goto err_platform_get;
+ }
+
+ dsim->res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!dsim->res) {
+ dev_err(&pdev->dev, "failed to request io memory region\n");
+ ret = -ENOMEM;
+ goto err_mem_region;
+ }
+
+ dsim->reg_base = ioremap(res->start, resource_size(res));
+ if (!dsim->reg_base) {
+ dev_err(&pdev->dev, "failed to remap io region\n");
+ ret = -EFAULT;
+ goto err_ioremap;
+ }
+
+ mutex_init(&dsim->lock);
+
+ /* bind lcd ddi matched with panel name. */
+ dsim_ddi = s5p_mipi_dsi_bind_lcd_ddi(dsim, dsim_pd->lcd_panel_name);
+ if (!dsim_ddi) {
+ dev_err(&pdev->dev, "mipi_dsim_ddi object not found.\n");
+ goto err_bind;
+ }
+
+ dsim->irq = platform_get_irq(pdev, 0);
+ if (dsim->irq < 0) {
+ dev_err(&pdev->dev, "failed to request dsim irq resource\n");
+ ret = -EINVAL;
+ goto err_platform_get_irq;
+ }
+
+ ret = request_irq(dsim->irq, s5p_mipi_dsi_interrupt_handler,
+ IRQF_SHARED, pdev->name, dsim);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "failed to request dsim irq\n");
+ ret = -EINVAL;
+ goto err_bind;
+ }
+
+ init_completion(&dsim_wr_comp);
+ init_completion(&dsim_rd_comp);
+
+ /* enable interrupt */
+ s5p_mipi_dsi_init_interrupt(dsim);
+
+ /* initialize mipi-dsi client(lcd panel). */
+ if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->probe)
+ dsim_ddi->dsim_lcd_drv->probe(dsim_ddi->dsim_lcd_dev);
+
+ /* in case that mipi got enabled at bootloader. */
+ if (dsim_pd->enabled)
+ goto out;
+
+ /* lcd panel power on. */
+ if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->power_on)
+ dsim_ddi->dsim_lcd_drv->power_on(dsim_ddi->dsim_lcd_dev, 1);
+
+ s5p_mipi_regulator_enable(dsim);
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, true);
+
+ s5p_mipi_update_cfg(dsim);
+
+ /* set lcd panel sequence commands. */
+ if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->set_sequence)
+ dsim_ddi->dsim_lcd_drv->set_sequence(dsim_ddi->dsim_lcd_dev);
+
+ dsim->suspended = false;
+
+out:
+ platform_set_drvdata(pdev, dsim);
+
+ dev_dbg(&pdev->dev, "mipi-dsi driver(%s mode) has been probed.\n",
+ (dsim_config->e_interface = DSIM_COMMAND) ?
+ "CPU" : "RGB");
+
+ return 0;
+
+err_bind:
+ iounmap(dsim->reg_base);
+
+err_ioremap:
+ release_mem_region(dsim->res->start, resource_size(dsim->res));
+
+err_mem_region:
+ release_resource(dsim->res);
+
+err_platform_get:
+ clk_disable(dsim->clock);
+ clk_put(dsim->clock);
+err_clock_get:
+ kfree(dsim);
+
+err_platform_get_irq:
+ return ret;
+}
+
+static int __devexit s5p_mipi_dsi_remove(struct platform_device *pdev)
+{
+ struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+ struct mipi_dsim_ddi *dsim_ddi, *next;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+ iounmap(dsim->reg_base);
+
+ clk_disable(dsim->clock);
+ clk_put(dsim->clock);
+
+ release_resource(dsim->res);
+ release_mem_region(dsim->res->start, resource_size(dsim->res));
+
+ list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+ if (dsim_ddi) {
+ if (dsim->id != dsim_ddi->bus_id)
+ continue;
+
+ dsim_lcd_drv = dsim_ddi->dsim_lcd_drv;
+
+ if (dsim_lcd_drv->remove)
+ dsim_lcd_drv->remove(dsim_ddi->dsim_lcd_dev);
+
+ kfree(dsim_ddi);
+ }
+ }
+
+ regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+ kfree(dsim);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5p_mipi_dsi_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+
+ disable_irq(dsim->irq);
+
+ if (dsim->suspended)
+ return 0;
+
+ if (master_to_driver(dsim) && (master_to_driver(dsim))->suspend)
+ (master_to_driver(dsim))->suspend(master_to_device(dsim));
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, false);
+
+ clk_disable(dsim->clock);
+
+ s5p_mipi_regulator_disable(dsim);
+
+ dsim->suspended = true;
+
+ return 0;
+}
+
+static int s5p_mipi_dsi_resume(struct platform_device *pdev)
+{
+ struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+ struct mipi_dsim_lcd_driver *client_drv = master_to_driver(dsim);
+ struct mipi_dsim_lcd_device *client_dev = master_to_device(dsim);
+
+ enable_irq(dsim->irq);
+
+ if (!dsim->suspended)
+ return 0;
+
+ /* lcd panel power on. */
+ if (client_drv && client_drv->power_on)
+ client_drv->power_on(client_dev, 1);
+
+ s5p_mipi_regulator_enable(dsim);
+
+ /* enable MIPI-DSI PHY. */
+ if (dsim->pd->phy_enable)
+ dsim->pd->phy_enable(pdev, true);
+
+ clk_enable(dsim->clock);
+
+ s5p_mipi_update_cfg(dsim);
+
+ /* set lcd panel sequence commands. */
+ if (client_drv && client_drv->set_sequence)
+ client_drv->set_sequence(client_dev);
+
+ dsim->suspended = false;
+
+ return 0;
+}
+#else
+#define s5p_mipi_dsi_suspend NULL
+#define s5p_mipi_dsi_resume NULL
+#endif
+
+static struct platform_driver s5p_mipi_dsi_driver = {
+ .probe = s5p_mipi_dsi_probe,
+ .remove = __devexit_p(s5p_mipi_dsi_remove),
+ .suspend = s5p_mipi_dsi_suspend,
+ .resume = s5p_mipi_dsi_resume,
+ .driver = {
+ .name = "s5p-mipi-dsim",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(s5p_mipi_dsi_driver);
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samusung SoC MIPI-DSI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/s5p_mipi_dsi_common.c b/drivers/video/s5p_mipi_dsi_common.c
new file mode 100644
index 0000000..12dfd91
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_common.c
@@ -0,0 +1,896 @@
+/* linux/drivers/video/s5p_mipi_dsi_common.c
+ *
+ * Samsung SoC MIPI-DSI common driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/mipi_dsim.h>
+
+#include <video/mipi_display.h>
+
+#include <mach/map.h>
+
+#include "s5p_mipi_dsi_regs.h"
+#include "s5p_mipi_dsi_lowlevel.h"
+#include "s5p_mipi_dsi_common.h"
+
+#define MIPI_FIFO_TIMEOUT msecs_to_jiffies(250)
+#define MIPI_RX_FIFO_READ_DONE 0x30800002
+#define MIPI_MAX_RX_FIFO 20
+#define MHZ (1000 * 1000)
+#define FIN_HZ (24 * MHZ)
+
+#define DFIN_PLL_MIN_HZ (6 * MHZ)
+#define DFIN_PLL_MAX_HZ (12 * MHZ)
+
+#define DFVCO_MIN_HZ (500 * MHZ)
+#define DFVCO_MAX_HZ (1000 * MHZ)
+
+#define TRY_GET_FIFO_TIMEOUT (5000 * 2)
+#define TRY_FIFO_CLEAR (10)
+
+/* MIPI-DSIM status types. */
+enum {
+ DSIM_STATE_INIT, /* should be initialized. */
+ DSIM_STATE_STOP, /* CPU and LCDC are LP mode. */
+ DSIM_STATE_HSCLKEN, /* HS clock was enabled. */
+ DSIM_STATE_ULPS
+};
+
+/* define DSI lane types. */
+enum {
+ DSIM_LANE_CLOCK = (1 << 0),
+ DSIM_LANE_DATA0 = (1 << 1),
+ DSIM_LANE_DATA1 = (1 << 2),
+ DSIM_LANE_DATA2 = (1 << 3),
+ DSIM_LANE_DATA3 = (1 << 4)
+};
+
+static unsigned int dpll_table[15] = {
+ 100, 120, 170, 220, 270,
+ 320, 390, 450, 510, 560,
+ 640, 690, 770, 870, 950
+};
+
+irqreturn_t s5p_mipi_dsi_interrupt_handler(int irq, void *dev_id)
+{
+ unsigned int intsrc = 0;
+ unsigned int intmsk = 0;
+ struct mipi_dsim_device *dsim = NULL;
+
+ dsim = (struct mipi_dsim_device *)dev_id;
+ if (!dsim) {
+ dev_dbg(dsim->dev, KERN_ERR "%s:error: wrong parameter\n",
+ __func__);
+ return IRQ_HANDLED;
+ }
+
+ intsrc = s5p_mipi_dsi_read_interrupt(dsim);
+ intmsk = s5p_mipi_dsi_read_interrupt_mask(dsim);
+
+ intmsk = ~(intmsk) & intsrc;
+
+ switch (intmsk) {
+ case INTMSK_RX_DONE:
+ complete(&dsim_rd_comp);
+ dev_dbg(dsim->dev, "MIPI INTMSK_RX_DONE\n");
+ break;
+ case INTMSK_FIFO_EMPTY:
+ complete(&dsim_wr_comp);
+ dev_dbg(dsim->dev, "MIPI INTMSK_FIFO_EMPTY\n");
+ break;
+ default:
+ break;
+ }
+
+ s5p_mipi_dsi_clear_interrupt(dsim, intmsk);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * write long packet to mipi dsi slave
+ * @dsim: mipi dsim device structure.
+ * @data0: packet data to send.
+ * @data1: size of packet data
+ */
+static void s5p_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim,
+ unsigned char *data0, unsigned int data_size)
+{
+ unsigned int data_cnt = 0, payload = 0;
+
+ /* in case that data count is more then 4 */
+ for (data_cnt = 0; data_cnt < data_size; data_cnt += 4) {
+ /*
+ * after sending 4bytes per one time,
+ * send remainder data less then 4.
+ */
+ if ((data_size - data_cnt) < 4) {
+ if ((data_size - data_cnt) = 3) {
+ payload = data0[data_cnt] |
+ data0[data_cnt + 1] << 8 |
+ data0[data_cnt + 2] << 16;
+ dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n",
+ payload, data0[data_cnt],
+ data0[data_cnt + 1],
+ data0[data_cnt + 2]);
+ } else if ((data_size - data_cnt) = 2) {
+ payload = data0[data_cnt] |
+ data0[data_cnt + 1] << 8;
+ dev_dbg(dsim->dev,
+ "count = 2 payload = %x, %x %x\n", payload,
+ data0[data_cnt],
+ data0[data_cnt + 1]);
+ } else if ((data_size - data_cnt) = 1) {
+ payload = data0[data_cnt];
+ }
+
+ s5p_mipi_dsi_wr_tx_data(dsim, payload);
+ /* send 4bytes per one time. */
+ } else {
+ payload = data0[data_cnt] |
+ data0[data_cnt + 1] << 8 |
+ data0[data_cnt + 2] << 16 |
+ data0[data_cnt + 3] << 24;
+
+ dev_dbg(dsim->dev,
+ "count = 4 payload = %x, %x %x %x %x\n",
+ payload, *(u8 *)(data0 + data_cnt),
+ data0[data_cnt + 1],
+ data0[data_cnt + 2],
+ data0[data_cnt + 3]);
+
+ s5p_mipi_dsi_wr_tx_data(dsim, payload);
+ }
+ }
+}
+
+int s5p_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned char *data0, unsigned int data_size)
+{
+ unsigned int check_rx_ack = 0;
+
+ if (dsim->state = DSIM_STATE_ULPS) {
+ dev_err(dsim->dev, "state is ULPS.\n");
+
+ return -EINVAL;
+ }
+
+ /* FIXME!!! why does it need this delay? */
+ msleep(20);
+
+ mutex_lock(&dsim->lock);
+
+ switch (data_id) {
+ /* short packet types of packet types for command. */
+ case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+ case MIPI_DSI_DCS_SHORT_WRITE:
+ case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+ s5p_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
+ if (check_rx_ack) {
+ /* process response func should be implemented */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+
+ /* general command */
+ case MIPI_DSI_COLOR_MODE_OFF:
+ case MIPI_DSI_COLOR_MODE_ON:
+ case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+ case MIPI_DSI_TURN_ON_PERIPHERAL:
+ s5p_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
+ if (check_rx_ack) {
+ /* process response func should be implemented. */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+
+ /* packet types for video data */
+ case MIPI_DSI_V_SYNC_START:
+ case MIPI_DSI_V_SYNC_END:
+ case MIPI_DSI_H_SYNC_START:
+ case MIPI_DSI_H_SYNC_END:
+ case MIPI_DSI_END_OF_TRANSMISSION:
+ mutex_unlock(&dsim->lock);
+ return 0;
+
+ /* long packet type and null packet */
+ case MIPI_DSI_NULL_PACKET:
+ case MIPI_DSI_BLANKING_PACKET:
+ mutex_unlock(&dsim->lock);
+ return 0;
+ case MIPI_DSI_GENERIC_LONG_WRITE:
+ case MIPI_DSI_DCS_LONG_WRITE:
+ {
+ unsigned int size, payload = 0;
+ INIT_COMPLETION(dsim_wr_comp);
+
+ size = data_size * 4;
+
+ /* if data count is less then 4, then send 3bytes data. */
+ if (data_size < 4) {
+ payload = data0[0] |
+ data0[1] << 8 |
+ data0[2] << 16;
+
+ s5p_mipi_dsi_wr_tx_data(dsim, payload);
+
+ dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n",
+ data_size, payload, data0[0],
+ data0[1], data0[2]);
+
+ /* in case that data count is more then 4 */
+ } else
+ s5p_mipi_dsi_long_data_wr(dsim, data0, data_size);
+
+ /* put data into header fifo */
+ s5p_mipi_dsi_wr_tx_header(dsim, data_id, data_size & 0xff,
+ (data_size & 0xff00) >> 8);
+
+ if (!wait_for_completion_interruptible_timeout(&dsim_wr_comp,
+ MIPI_FIFO_TIMEOUT)) {
+ dev_warn(dsim->dev, "command write timeout.\n");
+ mutex_unlock(&dsim->lock);
+ return -EAGAIN;
+ }
+
+ if (check_rx_ack) {
+ /* process response func should be implemented. */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+ }
+
+ /* packet typo for video data */
+ case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+ case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+ if (check_rx_ack) {
+ /* process response func should be implemented. */
+ mutex_unlock(&dsim->lock);
+ return 0;
+ } else {
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+ default:
+ dev_warn(dsim->dev,
+ "data id %x is not supported current DSI spec.\n",
+ data_id);
+
+ mutex_unlock(&dsim->lock);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&dsim->lock);
+ return 0;
+}
+
+static unsigned int s5p_mipi_dsi_long_data_rd(struct mipi_dsim_device *dsim,
+ unsigned int req_size, unsigned int rx_data, u8 *rx_buf)
+{
+ unsigned int rcv_pkt, i, j;
+ u16 rxsize;
+
+ /* for long packet */
+ rxsize = (u16)((rx_data & 0x00ffff00) >> 8);
+ dev_dbg(dsim->dev, "mipi dsi rx size : %d\n", rxsize);
+ if (rxsize != req_size) {
+ dev_dbg(dsim->dev,
+ KERN_ERR "received data size mismatch \
+ received: %d, requested: %d\n", rxsize, req_size);
+ goto err;
+ }
+
+ for (i = 0; i < (rxsize >> 2); i++) {
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+ dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
+ for (j = 0; j < 4; j++) {
+ rx_buf[(i * 4) + j] + (u8)(rcv_pkt >> (j * 8)) & 0xff;
+ dev_dbg(dsim->dev, "received value : %02x\n",
+ (rcv_pkt >> (j * 8)) & 0xff);
+ }
+ }
+ if (rxsize % 4) {
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+ dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
+ for (j = 0; j < (rxsize % 4); j++) {
+ rx_buf[(i * 4) + j] + (u8)(rcv_pkt >> (j * 8)) & 0xff;
+ dev_dbg(dsim->dev, "received value : %02x\n",
+ (rcv_pkt >> (j * 8)) & 0xff);
+ }
+ }
+
+ return rxsize;
+
+err:
+ return -EINVAL;
+}
+
+static unsigned int s5p_mipi_dsi_response_size(unsigned int req_size)
+{
+ switch (req_size) {
+ case 1:
+ return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE;
+ case 2:
+ return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE;
+ default:
+ return MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE;
+ }
+}
+
+int s5p_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf)
+{
+ unsigned int rx_data, rcv_pkt, i;
+ u8 response = 0;
+ u16 rxsize;
+
+ if (dsim->state = DSIM_STATE_ULPS) {
+ dev_err(dsim->dev, "state is ULPS.\n");
+
+ return -EINVAL;
+ }
+
+ /* FIXME!!! */
+ msleep(20);
+
+ mutex_lock(&dsim->lock);
+ INIT_COMPLETION(dsim_rd_comp);
+ s5p_mipi_dsi_rd_tx_header(dsim,
+ MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, req_size);
+
+ response = s5p_mipi_dsi_response_size(req_size);
+
+ switch (data_id) {
+ case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+ case MIPI_DSI_DCS_READ:
+ s5p_mipi_dsi_rd_tx_header(dsim,
+ data_id, data0);
+ /* process response func should be implemented. */
+ break;
+ default:
+ dev_warn(dsim->dev,
+ "data id %x is not supported current DSI spec.\n",
+ data_id);
+
+ return -EINVAL;
+ }
+
+ if (!wait_for_completion_interruptible_timeout(&dsim_rd_comp,
+ MIPI_FIFO_TIMEOUT)) {
+ pr_err("RX done interrupt timeout\n");
+ mutex_unlock(&dsim->lock);
+ return 0;
+ }
+
+ msleep(20);
+
+ rx_data = s5p_mipi_dsi_rd_rx_fifo(dsim);
+
+ if ((u8)(rx_data & 0xff) != response) {
+ printk(KERN_ERR
+ "mipi dsi wrong response rx_data : %x, response:%x\n",
+ rx_data, response);
+ goto clear_rx_fifo;
+ }
+
+ if (req_size <= 2) {
+ /* for short packet */
+ for (i = 0; i < req_size; i++)
+ rx_buf[i] = (rx_data >> (8 + (i * 8))) & 0xff;
+ rxsize = req_size;
+ } else {
+ /* for long packet */
+ rxsize = s5p_mipi_dsi_long_data_rd(dsim, req_size, rx_data,
+ rx_buf);
+ if (rxsize != req_size)
+ goto clear_rx_fifo;
+ }
+
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+
+ msleep(20);
+
+ if (rcv_pkt != MIPI_RX_FIFO_READ_DONE) {
+ dev_info(dsim->dev,
+ "Can't found RX FIFO READ DONE FLAG : %x\n", rcv_pkt);
+ goto clear_rx_fifo;
+ }
+
+ mutex_unlock(&dsim->lock);
+
+ return rxsize;
+
+clear_rx_fifo:
+ i = 0;
+ while (1) {
+ rcv_pkt = s5p_mipi_dsi_rd_rx_fifo(dsim);
+ if ((rcv_pkt = MIPI_RX_FIFO_READ_DONE)
+ || (i > MIPI_MAX_RX_FIFO))
+ break;
+ dev_dbg(dsim->dev,
+ "mipi dsi clear rx fifo : %08x\n", rcv_pkt);
+ i++;
+ }
+ dev_info(dsim->dev,
+ "mipi dsi rx done count : %d, rcv_pkt : %08x\n", i, rcv_pkt);
+
+ mutex_unlock(&dsim->lock);
+
+ return 0;
+}
+
+static int s5p_mipi_dsi_pll_on(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ int sw_timeout;
+
+ if (enable) {
+ sw_timeout = 1000;
+
+ s5p_mipi_dsi_enable_pll(dsim, 1);
+ while (1) {
+ sw_timeout--;
+ if (s5p_mipi_dsi_is_pll_stable(dsim))
+ return 0;
+ if (sw_timeout = 0)
+ return -EINVAL;
+ }
+ } else
+ s5p_mipi_dsi_enable_pll(dsim, 0);
+
+ return 0;
+}
+
+static unsigned long s5p_mipi_dsi_change_pll(struct mipi_dsim_device *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler)
+{
+ unsigned long dfin_pll, dfvco, dpll_out;
+ unsigned int i, freq_band = 0xf;
+
+ dfin_pll = (FIN_HZ / pre_divider);
+
+ /******************************************************
+ * Serial Clock(=ByteClk X 8) FreqBand[3:0] *
+ ******************************************************
+ * ~ 99.99 MHz 0000
+ * 100 ~ 119.99 MHz 0001
+ * 120 ~ 159.99 MHz 0010
+ * 160 ~ 199.99 MHz 0011
+ * 200 ~ 239.99 MHz 0100
+ * 140 ~ 319.99 MHz 0101
+ * 320 ~ 389.99 MHz 0110
+ * 390 ~ 449.99 MHz 0111
+ * 450 ~ 509.99 MHz 1000
+ * 510 ~ 559.99 MHz 1001
+ * 560 ~ 639.99 MHz 1010
+ * 640 ~ 689.99 MHz 1011
+ * 690 ~ 769.99 MHz 1100
+ * 770 ~ 869.99 MHz 1101
+ * 870 ~ 949.99 MHz 1110
+ * 950 ~ 1000 MHz 1111
+ ******************************************************/
+ if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) {
+ dev_warn(dsim->dev, "fin_pll range should be 6MHz ~ 12MHz\n");
+ s5p_mipi_dsi_enable_afc(dsim, 0, 0);
+ } else {
+ if (dfin_pll < 7 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x1);
+ else if (dfin_pll < 8 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x0);
+ else if (dfin_pll < 9 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x3);
+ else if (dfin_pll < 10 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x2);
+ else if (dfin_pll < 11 * MHZ)
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x5);
+ else
+ s5p_mipi_dsi_enable_afc(dsim, 1, 0x4);
+ }
+
+ dfvco = dfin_pll * main_divider;
+ dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n",
+ dfvco, dfin_pll, main_divider);
+ if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ)
+ dev_warn(dsim->dev, "fvco range should be 500MHz ~ 1000MHz\n");
+
+ dpll_out = dfvco / (1 << scaler);
+ dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n",
+ dpll_out, dfvco, scaler);
+
+ for (i = 0; i < ARRAY_SIZE(dpll_table); i++) {
+ if (dpll_out < dpll_table[i] * MHZ) {
+ freq_band = i;
+ break;
+ }
+ }
+
+ dev_dbg(dsim->dev, "freq_band = %d\n", freq_band);
+
+ s5p_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler);
+
+ s5p_mipi_dsi_hs_zero_ctrl(dsim, 0);
+ s5p_mipi_dsi_prep_ctrl(dsim, 0);
+
+ /* Freq Band */
+ s5p_mipi_dsi_pll_freq_band(dsim, freq_band);
+
+ /* Stable time */
+ s5p_mipi_dsi_pll_stable_time(dsim, dsim->dsim_config->pll_stable_time);
+
+ /* Enable PLL */
+ dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n",
+ (dpll_out / MHZ));
+
+ return dpll_out;
+}
+
+static int s5p_mipi_dsi_set_clock(struct mipi_dsim_device *dsim,
+ unsigned int byte_clk_sel, unsigned int enable)
+{
+ unsigned int esc_div;
+ unsigned long esc_clk_error_rate;
+ unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0;
+
+ if (enable) {
+ dsim->e_clk_src = byte_clk_sel;
+
+ /* Escape mode clock and byte clock source */
+ s5p_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel);
+
+ /* DPHY, DSIM Link : D-PHY clock out */
+ if (byte_clk_sel = DSIM_PLL_OUT_DIV8) {
+ hs_clk = s5p_mipi_dsi_change_pll(dsim,
+ dsim->dsim_config->p, dsim->dsim_config->m,
+ dsim->dsim_config->s);
+ if (hs_clk = 0) {
+ dev_err(dsim->dev,
+ "failed to get hs clock.\n");
+ return -EINVAL;
+ }
+
+ byte_clk = hs_clk / 8;
+ s5p_mipi_dsi_enable_pll_bypass(dsim, 0);
+ s5p_mipi_dsi_pll_on(dsim, 1);
+ /* DPHY : D-PHY clock out, DSIM link : external clock out */
+ } else if (byte_clk_sel = DSIM_EXT_CLK_DIV8) {
+ dev_warn(dsim->dev, "this project is not support\n");
+ dev_warn(dsim->dev,
+ "external clock source for MIPI DSIM.\n");
+ } else if (byte_clk_sel = DSIM_EXT_CLK_BYPASS) {
+ dev_warn(dsim->dev, "this project is not support\n");
+ dev_warn(dsim->dev,
+ "external clock source for MIPI DSIM\n");
+ }
+
+ /* escape clock divider */
+ esc_div = byte_clk / (dsim->dsim_config->esc_clk);
+ dev_dbg(dsim->dev,
+ "esc_div = %d, byte_clk = %lu, esc_clk = %lu\n",
+ esc_div, byte_clk, dsim->dsim_config->esc_clk);
+ if ((byte_clk / esc_div) >= (20 * MHZ) ||
+ (byte_clk / esc_div) >
+ dsim->dsim_config->esc_clk)
+ esc_div += 1;
+
+ escape_clk = byte_clk / esc_div;
+ dev_dbg(dsim->dev,
+ "escape_clk = %lu, byte_clk = %lu, esc_div = %d\n",
+ escape_clk, byte_clk, esc_div);
+
+ /* enable escape clock. */
+ s5p_mipi_dsi_enable_byte_clock(dsim, 1);
+
+ /* enable byte clk and escape clock */
+ s5p_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div);
+ /* escape clock on lane */
+ s5p_mipi_dsi_enable_esc_clk_on_lane(dsim,
+ (DSIM_LANE_CLOCK | dsim->data_lane), 1);
+
+ dev_dbg(dsim->dev, "byte clock is %luMHz\n",
+ (byte_clk / MHZ));
+ dev_dbg(dsim->dev, "escape clock that user's need is %lu\n",
+ (dsim->dsim_config->esc_clk / MHZ));
+ dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div);
+ dev_dbg(dsim->dev, "escape clock is %luMHz\n",
+ ((byte_clk / esc_div) / MHZ));
+
+ if ((byte_clk / esc_div) > escape_clk) {
+ esc_clk_error_rate = escape_clk /
+ (byte_clk / esc_div);
+ dev_warn(dsim->dev, "error rate is %lu over.\n",
+ (esc_clk_error_rate / 100));
+ } else if ((byte_clk / esc_div) < (escape_clk)) {
+ esc_clk_error_rate = (byte_clk / esc_div) /
+ escape_clk;
+ dev_warn(dsim->dev, "error rate is %lu under.\n",
+ (esc_clk_error_rate / 100));
+ }
+ } else {
+ s5p_mipi_dsi_enable_esc_clk_on_lane(dsim,
+ (DSIM_LANE_CLOCK | dsim->data_lane), 0);
+ s5p_mipi_dsi_set_esc_clk_prs(dsim, 0, 0);
+
+ /* disable escape clock. */
+ s5p_mipi_dsi_enable_byte_clock(dsim, 0);
+
+ if (byte_clk_sel = DSIM_PLL_OUT_DIV8)
+ s5p_mipi_dsi_pll_on(dsim, 0);
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim)
+{
+ dsim->state = DSIM_STATE_INIT;
+
+ switch (dsim->dsim_config->e_no_data_lane) {
+ case DSIM_DATA_LANE_1:
+ dsim->data_lane = DSIM_LANE_DATA0;
+ break;
+ case DSIM_DATA_LANE_2:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1;
+ break;
+ case DSIM_DATA_LANE_3:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+ DSIM_LANE_DATA2;
+ break;
+ case DSIM_DATA_LANE_4:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+ DSIM_LANE_DATA2 | DSIM_LANE_DATA3;
+ break;
+ default:
+ dev_info(dsim->dev, "data lane is invalid.\n");
+ return -EINVAL;
+ };
+
+ s5p_mipi_dsi_sw_reset(dsim);
+ s5p_mipi_dsi_func_reset(dsim);
+
+ s5p_mipi_dsi_dp_dn_swap(dsim, 0);
+
+ return 0;
+}
+
+void s5p_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim)
+{
+ unsigned int src = 0;
+
+ src = (INTSRC_SFR_FIFO_EMPTY | INTSRC_RX_DATA_DONE);
+ s5p_mipi_dsi_set_interrupt(dsim, src, 1);
+
+ src = 0;
+ src = ~(INTMSK_RX_DONE | INTMSK_FIFO_EMPTY);
+ s5p_mipi_dsi_set_interrupt_mask(dsim, src, 1);
+}
+
+int s5p_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ /* enable only frame done interrupt */
+ s5p_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable);
+
+ return 0;
+}
+
+void s5p_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+
+ /* consider Main display and Sub display. */
+
+ s5p_mipi_dsi_set_main_stand_by(dsim, enable);
+}
+
+int s5p_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_config)
+{
+ struct mipi_dsim_platform_data *dsim_pd;
+ struct fb_videomode *timing;
+
+ dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
+ timing = (struct fb_videomode *)dsim_pd->lcd_panel_info;
+
+ /* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */
+ if (dsim_config->e_interface = (u32) DSIM_VIDEO) {
+ if (dsim_config->auto_vertical_cnt = 0) {
+ s5p_mipi_dsi_set_main_disp_vporch(dsim,
+ dsim_config->cmd_allow,
+ timing->upper_margin,
+ timing->lower_margin);
+ s5p_mipi_dsi_set_main_disp_hporch(dsim,
+ timing->left_margin,
+ timing->right_margin);
+ s5p_mipi_dsi_set_main_disp_sync_area(dsim,
+ timing->vsync_len,
+ timing->hsync_len);
+ }
+ }
+
+ s5p_mipi_dsi_set_main_disp_resol(dsim, timing->xres,
+ timing->yres);
+
+ s5p_mipi_dsi_display_config(dsim, dsim_config);
+
+ dev_info(dsim->dev, "lcd panel => width = %d, height = %d\n",
+ timing->xres, timing->yres);
+
+ return 0;
+}
+
+int s5p_mipi_dsi_init_link(struct mipi_dsim_device *dsim)
+{
+ unsigned int time_out = 100;
+
+ switch (dsim->state) {
+ case DSIM_STATE_INIT:
+ s5p_mipi_dsi_init_fifo_pointer(dsim, 0x1f);
+
+ /* dsi configuration */
+ s5p_mipi_dsi_init_config(dsim);
+ s5p_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1);
+ s5p_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1);
+
+ /* set clock configuration */
+ s5p_mipi_dsi_set_clock(dsim, dsim->dsim_config->e_byte_clk, 1);
+
+ /* check clock and data lane state are stop state */
+ while (!(s5p_mipi_dsi_is_lane_state(dsim))) {
+ time_out--;
+ if (time_out = 0) {
+ dev_err(dsim->dev,
+ "DSI Master is not stop state.\n");
+ dev_err(dsim->dev,
+ "Check initialization process\n");
+
+ return -EINVAL;
+ }
+ }
+ if (time_out != 0) {
+ dev_info(dsim->dev,
+ "DSI Master driver has been completed.\n");
+ dev_info(dsim->dev, "DSI Master state is stop state\n");
+ }
+
+ dsim->state = DSIM_STATE_STOP;
+
+ /* BTA sequence counters */
+ s5p_mipi_dsi_set_stop_state_counter(dsim,
+ dsim->dsim_config->stop_holding_cnt);
+ s5p_mipi_dsi_set_bta_timeout(dsim,
+ dsim->dsim_config->bta_timeout);
+ s5p_mipi_dsi_set_lpdr_timeout(dsim,
+ dsim->dsim_config->rx_timeout);
+
+ return 0;
+ default:
+ dev_info(dsim->dev, "DSI Master is already init.\n");
+ return 0;
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim)
+{
+ if (dsim->state != DSIM_STATE_STOP) {
+ dev_warn(dsim->dev, "DSIM is not in stop state.\n");
+ return 0;
+ }
+
+ if (dsim->e_clk_src = DSIM_EXT_CLK_BYPASS) {
+ dev_warn(dsim->dev, "clock source is external bypass.\n");
+ return 0;
+ }
+
+ dsim->state = DSIM_STATE_HSCLKEN;
+
+ /* set LCDC and CPU transfer mode to HS. */
+ s5p_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
+ s5p_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
+ s5p_mipi_dsi_enable_hs_clock(dsim, 1);
+
+ return 0;
+}
+
+int s5p_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int mode)
+{
+ if (mode) {
+ if (dsim->state != DSIM_STATE_HSCLKEN) {
+ dev_err(dsim->dev, "HS Clock lane is not enabled.\n");
+ return -EINVAL;
+ }
+
+ s5p_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
+ } else {
+ if (dsim->state = DSIM_STATE_INIT || dsim->state =
+ DSIM_STATE_ULPS) {
+ dev_err(dsim->dev,
+ "DSI Master is not STOP or HSDT state.\n");
+ return -EINVAL;
+ }
+
+ s5p_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
+ }
+
+ return 0;
+}
+
+int s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
+{
+ return _s5p_mipi_dsi_get_frame_done_status(dsim);
+}
+
+int s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
+{
+ _s5p_mipi_dsi_clear_frame_done(dsim);
+
+ return 0;
+}
+
+int s5p_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
+ unsigned int val)
+{
+ int try = TRY_FIFO_CLEAR;
+
+ s5p_mipi_dsi_sw_reset_release(dsim);
+ s5p_mipi_dsi_func_reset(dsim);
+
+ do {
+ if (s5p_mipi_dsi_get_sw_reset_release(dsim)) {
+ s5p_mipi_dsi_init_interrupt(dsim);
+ dev_dbg(dsim->dev, "reset release done.\n");
+ return 0;
+ }
+ } while (--try);
+
+ dev_err(dsim->dev, "failed to clear dsim fifo.\n");
+ return -EAGAIN;
+}
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/s5p_mipi_dsi_common.h b/drivers/video/s5p_mipi_dsi_common.h
new file mode 100644
index 0000000..e1063e6
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_common.h
@@ -0,0 +1,46 @@
+/* linux/drivers/video/s5p_mipi_dsi_common.h
+ *
+ * Header file for Samsung SoC MIPI-DSI common driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S5P_MIPI_DSI_COMMON_H
+#define _S5P_MIPI_DSI_COMMON_H
+
+static DECLARE_COMPLETION(dsim_rd_comp);
+static DECLARE_COMPLETION(dsim_wr_comp);
+
+int s5p_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned char *data0, unsigned int data_size);
+int s5p_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf);
+irqreturn_t s5p_mipi_dsi_interrupt_handler(int irq, void *dev_id);
+void s5p_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+int s5p_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_info);
+int s5p_mipi_dsi_init_link(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int mode);
+int s5p_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+int s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
+
+extern struct fb_info *registered_fb[FB_MAX] __read_mostly;
+
+int s5p_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
+ unsigned int val);
+
+#endif /* _S5P_MIPI_DSI_COMMON_H */
diff --git a/drivers/video/s5p_mipi_dsi_lowlevel.c b/drivers/video/s5p_mipi_dsi_lowlevel.c
new file mode 100644
index 0000000..a4a21d0
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_lowlevel.c
@@ -0,0 +1,617 @@
+/* linux/drivers/video/s5p_mipi_dsi_lowlevel.c
+ *
+ * Samsung SoC MIPI-DSI lowlevel driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/mipi_dsim.h>
+
+#include <mach/map.h>
+
+#include "s5p_mipi_dsi_regs.h"
+
+void s5p_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
+
+ reg |= DSIM_FUNCRST;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
+}
+
+void s5p_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
+
+ reg |= DSIM_SWRST;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
+}
+
+void s5p_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ reg |= INTSRC_SW_RST_RELEASE;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+int s5p_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim)
+{
+ return (readl(dsim->reg_base + S5P_DSIM_INTSRC)) &
+ INTSRC_SW_RST_RELEASE;
+}
+
+unsigned int s5p_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_INTMSK);
+
+ return reg;
+}
+
+void s5p_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
+ unsigned int mode, unsigned int mask)
+{
+ unsigned int reg = 0;
+
+ if (mask)
+ reg |= mode;
+ else
+ reg &= ~mode;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTMSK);
+}
+
+void s5p_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
+ unsigned int cfg)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_FIFOCTRL);
+
+ writel(reg & ~(cfg), dsim->reg_base + S5P_DSIM_FIFOCTRL);
+ mdelay(10);
+ reg |= cfg;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_FIFOCTRL);
+}
+
+/*
+ * this function set PLL P, M and S value in D-PHY
+ */
+void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+ unsigned int value)
+{
+ writel(DSIM_AFC_CTL(value), dsim->reg_base + S5P_DSIM_PHYACCHR);
+}
+
+void s5p_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_MDRESOL);
+
+ reg &= ~DSIM_MAIN_STAND_BY;
+
+ if (enable)
+ reg |= DSIM_MAIN_STAND_BY;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+}
+
+void s5p_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int width_resol, unsigned int height_resol)
+{
+ unsigned int reg;
+
+ /* standby should be set after configuration so set to not ready*/
+ reg = (readl(dsim->reg_base + S5P_DSIM_MDRESOL)) &
+ ~(DSIM_MAIN_STAND_BY);
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+
+ reg &= ~((0x7ff << 16) | (0x7ff << 0));
+ reg |= DSIM_MAIN_VRESOL(height_resol) | DSIM_MAIN_HRESOL(width_resol);
+
+ reg |= DSIM_MAIN_STAND_BY;
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+}
+
+void s5p_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
+ unsigned int cmd_allow, unsigned int vfront, unsigned int vback)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MVPORCH)) &
+ ~((DSIM_CMD_ALLOW_MASK) | (DSIM_STABLE_VFP_MASK) |
+ (DSIM_MAIN_VBP_MASK));
+
+ reg |= (DSIM_CMD_ALLOW_SHIFT(cmd_allow & 0xf) |
+ DSIM_STABLE_VFP_SHIFT(vfront & 0x7ff) |
+ DSIM_MAIN_VBP_SHIFT(vback & 0x7ff));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MVPORCH);
+}
+
+void s5p_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
+ unsigned int front, unsigned int back)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MHPORCH)) &
+ ~((DSIM_MAIN_HFP_MASK) | (DSIM_MAIN_HBP_MASK));
+
+ reg |= DSIM_MAIN_HFP_SHIFT(front) | DSIM_MAIN_HBP_SHIFT(back);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MHPORCH);
+}
+
+void s5p_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MSYNC)) &
+ ~((DSIM_MAIN_VSA_MASK) | (DSIM_MAIN_HSA_MASK));
+
+ reg |= (DSIM_MAIN_VSA_SHIFT(vert & 0x3ff) |
+ DSIM_MAIN_HSA_SHIFT(hori));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MSYNC);
+}
+
+void s5p_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_SDRESOL)) &
+ ~(DSIM_SUB_STANDY_MASK);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+
+ reg &= ~(DSIM_SUB_VRESOL_MASK) | ~(DSIM_SUB_HRESOL_MASK);
+ reg |= (DSIM_SUB_VRESOL_SHIFT(vert & 0x7ff) |
+ DSIM_SUB_HRESOL_SHIFT(hori & 0x7ff));
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+
+ reg |= DSIM_SUB_STANDY_SHIFT(1);
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+}
+
+void s5p_mipi_dsi_init_config(struct mipi_dsim_device *dsim)
+{
+ struct mipi_dsim_config *dsim_config = dsim->dsim_config;
+
+ unsigned int cfg = (readl(dsim->reg_base + S5P_DSIM_CONFIG)) &
+ ~((1 << 28) | (0x1f << 20) | (0x3 << 5));
+
+ cfg = ((DSIM_AUTO_FLUSH(dsim_config->auto_flush)) |
+ (DSIM_EOT_DISABLE(dsim_config->eot_disable)) |
+ (DSIM_AUTO_MODE_SHIFT(dsim_config->auto_vertical_cnt)) |
+ (DSIM_HSE_MODE_SHIFT(dsim_config->hse)) |
+ (DSIM_HFP_MODE_SHIFT(dsim_config->hfp)) |
+ (DSIM_HBP_MODE_SHIFT(dsim_config->hbp)) |
+ (DSIM_HSA_MODE_SHIFT(dsim_config->hsa)) |
+ (DSIM_NUM_OF_DATALANE_SHIFT(dsim_config->e_no_data_lane)));
+
+ writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_config)
+{
+ u32 reg = (readl(dsim->reg_base + S5P_DSIM_CONFIG)) &
+ ~((0x3 << 26) | (1 << 25) | (0x3 << 18) | (0x7 << 12) |
+ (0x3 << 16) | (0x7 << 8));
+
+ if (dsim_config->e_interface = DSIM_VIDEO)
+ reg |= (1 << 25);
+ else if (dsim_config->e_interface = DSIM_COMMAND)
+ reg &= ~(1 << 25);
+ else {
+ dev_err(dsim->dev, "unknown lcd type.\n");
+ return;
+ }
+
+ /* main lcd */
+ reg |= ((u8) (dsim_config->e_burst_mode) & 0x3) << 26 |
+ ((u8) (dsim_config->e_virtual_ch) & 0x3) << 18 |
+ ((u8) (dsim_config->e_pixel_format) & 0x7) << 12;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
+ unsigned int enable)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_CONFIG);
+
+ if (enable)
+ reg |= DSIM_LANE_ENx(lane);
+ else
+ reg &= ~DSIM_LANE_ENx(lane);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+
+void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+ unsigned int count)
+{
+ unsigned int cfg;
+
+ /* get the data lane number. */
+ cfg = DSIM_NUM_OF_DATALANE_SHIFT(count);
+
+ writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
+ unsigned int afc_code)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR);
+
+ if (enable) {
+ reg |= (1 << 14);
+ reg &= ~(0x7 << 5);
+ reg |= (afc_code & 0x7) << 5;
+ } else
+ reg &= ~(1 << 14);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR);
+}
+
+void s5p_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_PLL_BYPASS_SHIFT(0x1));
+
+ reg |= DSIM_PLL_BYPASS_SHIFT(enable);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
+ unsigned int m, unsigned int s)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PLLCTRL);
+
+ reg |= ((p & 0x3f) << 13) | ((m & 0x1ff) << 4) | ((s & 0x7) << 1);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
+ unsigned int freq_band)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(DSIM_FREQ_BAND_SHIFT(0x1f));
+
+ reg |= DSIM_FREQ_BAND_SHIFT(freq_band & 0x1f);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x7ffff << 1);
+
+ reg |= (pre_divider & 0x3f) << 13 | (main_divider & 0x1ff) << 4 |
+ (scaler & 0x7) << 1;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
+ unsigned int lock_time)
+{
+ writel(lock_time, dsim->reg_base + S5P_DSIM_PLLTMR);
+}
+
+void s5p_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim, unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(DSIM_PLL_EN_SHIFT(0x1));
+
+ reg |= DSIM_PLL_EN_SHIFT(enable & 0x1);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
+ unsigned int src)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_BYTE_CLK_SRC_SHIFT(0x3));
+
+ reg |= (DSIM_BYTE_CLK_SRC_SHIFT(src));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_BYTE_CLKEN_SHIFT(0x1));
+
+ reg |= DSIM_BYTE_CLKEN_SHIFT(enable);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
+ unsigned int enable, unsigned int prs_val)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_ESC_CLKEN_SHIFT(0x1) | 0xffff);
+
+ reg |= DSIM_ESC_CLKEN_SHIFT(enable);
+ if (enable)
+ reg |= prs_val;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
+ unsigned int lane_sel, unsigned int enable)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_CLKCTRL);
+
+ if (enable)
+ reg |= DSIM_LANE_ESC_CLKEN(lane_sel);
+ else
+
+ reg &= ~DSIM_LANE_ESC_CLKEN(lane_sel);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE)) &
+ ~(DSIM_FORCE_STOP_STATE_SHIFT(0x1));
+
+ reg |= (DSIM_FORCE_STOP_STATE_SHIFT(enable & 0x1));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+unsigned int s5p_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
+
+ /**
+ * check clock and data lane states.
+ * if MIPI-DSI controller was enabled at bootloader then
+ * TX_READY_HS_CLK is enabled otherwise STOP_STATE_CLK.
+ * so it should be checked for two case.
+ */
+ if ((reg & DSIM_STOP_STATE_DAT(0xf)) &&
+ ((reg & DSIM_STOP_STATE_CLK) ||
+ (reg & DSIM_TX_READY_HS_CLK)))
+ return 1;
+
+ return 0;
+}
+
+void s5p_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
+ unsigned int cnt_val)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE)) &
+ ~(DSIM_STOP_STATE_CNT_SHIFT(0x7ff));
+
+ reg |= (DSIM_STOP_STATE_CNT_SHIFT(cnt_val & 0x7ff));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT)) &
+ ~(DSIM_BTA_TOUT_SHIFT(0xff));
+
+ reg |= (DSIM_BTA_TOUT_SHIFT(timeout));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
+}
+
+void s5p_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT)) &
+ ~(DSIM_LPDR_TOUT_SHIFT(0xffff));
+
+ reg |= (DSIM_LPDR_TOUT_SHIFT(timeout));
+
+ writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
+}
+
+void s5p_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
+
+ reg &= ~DSIM_CMD_LPDT_LP;
+
+ if (lp)
+ reg |= DSIM_CMD_LPDT_LP;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
+
+ reg &= ~DSIM_TX_LPDT_LP;
+
+ if (lp)
+ reg |= DSIM_TX_LPDT_LP;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_TX_REQUEST_HSCLK_SHIFT(0x1));
+
+ reg |= DSIM_TX_REQUEST_HSCLK_SHIFT(enable);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
+ unsigned int swap_en)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR1);
+
+ reg &= ~(0x3 << 0);
+ reg |= (swap_en & 0x3) << 0;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR1);
+}
+
+void s5p_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
+ unsigned int hs_zero)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0xf << 28);
+
+ reg |= ((hs_zero & 0xf) << 28);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x7 << 20);
+
+ reg |= ((prep & 0x7) << 20);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+unsigned int s5p_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim)
+{
+ return readl(dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+void s5p_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ reg |= src;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+void s5p_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src, unsigned int enable)
+{
+ unsigned int reg = 0;
+
+ if (enable)
+ reg |= src;
+ else
+ reg &= ~src;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+unsigned int s5p_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
+
+ return reg & (1 << 31) ? 1 : 0;
+}
+
+unsigned int s5p_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim)
+{
+ return readl(dsim->reg_base + S5P_DSIM_FIFOCTRL) & ~(0x1f);
+}
+
+void s5p_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim,
+ unsigned int di, unsigned int data0, unsigned int data1)
+{
+ unsigned int reg = (data1 << 16) | (data0 << 8) | ((di & 0x3f) << 0);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
+}
+
+void s5p_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
+ unsigned int di, unsigned int data0)
+{
+ unsigned int reg = (data0 << 8) | (di << 0);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
+}
+
+unsigned int s5p_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim)
+{
+ return readl(dsim->reg_base + S5P_DSIM_RXFIFO);
+}
+
+unsigned int _s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ return (reg & INTSRC_FRAME_DONE) ? 1 : 0;
+}
+
+void _s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ writel(reg | INTSRC_FRAME_DONE, dsim->reg_base +
+ S5P_DSIM_INTSRC);
+}
+
+void s5p_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
+ unsigned int tx_data)
+{
+ writel(tx_data, dsim->reg_base + S5P_DSIM_PAYLOAD);
+}
diff --git a/drivers/video/s5p_mipi_dsi_lowlevel.h b/drivers/video/s5p_mipi_dsi_lowlevel.h
new file mode 100644
index 0000000..da3a63e
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_lowlevel.h
@@ -0,0 +1,112 @@
+/* linux/drivers/video/s5p_mipi_dsi_lowlevel.h
+ *
+ * Header file for Samsung SoC MIPI-DSI lowlevel driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S5P_MIPI_DSI_LOWLEVEL_H
+#define _S5P_MIPI_DSI_LOWLEVEL_H
+
+void s5p_mipi_dsi_func_reset(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim);
+int s5p_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
+ unsigned int mode, unsigned int mask);
+void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+ unsigned int count);
+void s5p_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
+ unsigned int cfg);
+void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+ unsigned int value);
+void s5p_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+ unsigned int value);
+void s5p_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int width_resol, unsigned int height_resol);
+void s5p_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
+ unsigned int cmd_allow, unsigned int vfront, unsigned int vback);
+void s5p_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
+ unsigned int front, unsigned int back);
+void s5p_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori);
+void s5p_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
+ unsigned int vert, unsigned int hori);
+void s5p_mipi_dsi_init_config(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
+ struct mipi_dsim_config *dsim_config);
+void s5p_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+ unsigned int count);
+void s5p_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
+ unsigned int enable);
+void s5p_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
+ unsigned int afc_code);
+void s5p_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
+ unsigned int m, unsigned int s);
+void s5p_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
+ unsigned int freq_band);
+void s5p_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler);
+void s5p_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
+ unsigned int lock_time);
+void s5p_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
+ unsigned int src);
+void s5p_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
+ unsigned int enable, unsigned int prs_val);
+void s5p_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
+ unsigned int lane_sel, unsigned int enable);
+void s5p_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+unsigned int s5p_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
+ unsigned int cnt_val);
+void s5p_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout);
+void s5p_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
+ unsigned int timeout);
+void s5p_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp);
+void s5p_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
+ unsigned int lp);
+void s5p_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
+ unsigned int enable);
+void s5p_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
+ unsigned int swap_en);
+void s5p_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
+ unsigned int hs_zero);
+void s5p_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep);
+unsigned int s5p_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim);
+unsigned int s5p_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src);
+void s5p_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
+ unsigned int src, unsigned int enable);
+unsigned int s5p_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim);
+unsigned int s5p_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim);
+unsigned int _s5p_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
+void _s5p_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
+void s5p_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, unsigned int di,
+ unsigned int data0, unsigned int data1);
+void s5p_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
+ unsigned int tx_data);
+void s5p_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
+ unsigned int data0, unsigned int data1);
+unsigned int s5p_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim);
+
+#endif /* _S5P_MIPI_DSI_LOWLEVEL_H */
diff --git a/drivers/video/s5p_mipi_dsi_regs.h b/drivers/video/s5p_mipi_dsi_regs.h
new file mode 100644
index 0000000..2ad482f
--- /dev/null
+++ b/drivers/video/s5p_mipi_dsi_regs.h
@@ -0,0 +1,149 @@
+/* linux/driver/video/s5p_mipi_dsi_regs.h
+ *
+ * Register definition file for Samsung MIPI-DSIM driver
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _REGS_DSIM_H
+#define _REGS_DSIM_H
+
+#define S5P_DSIM_STATUS 0x0 /* Status register */
+#define S5P_DSIM_SWRST 0x4 /* Software reset register */
+#define S5P_DSIM_CLKCTRL 0x8 /* Clock control register */
+#define S5P_DSIM_TIMEOUT 0xc /* Time out register */
+#define S5P_DSIM_CONFIG 0x10 /* Configuration register */
+#define S5P_DSIM_ESCMODE 0x14 /* Escape mode register */
+
+/* Main display image resolution register */
+#define S5P_DSIM_MDRESOL 0x18
+#define S5P_DSIM_MVPORCH 0x1c /* Main display Vporch register */
+#define S5P_DSIM_MHPORCH 0x20 /* Main display Hporch register */
+#define S5P_DSIM_MSYNC 0x24 /* Main display sync area register */
+
+/* Sub display image resolution register */
+#define S5P_DSIM_SDRESOL 0x28
+#define S5P_DSIM_INTSRC 0x2c /* Interrupt source register */
+#define S5P_DSIM_INTMSK 0x30 /* Interrupt mask register */
+#define S5P_DSIM_PKTHDR 0x34 /* Packet Header FIFO register */
+#define S5P_DSIM_PAYLOAD 0x38 /* Payload FIFO register */
+#define S5P_DSIM_RXFIFO 0x3c /* Read FIFO register */
+#define S5P_DSIM_FIFOTHLD 0x40 /* FIFO threshold level register */
+#define S5P_DSIM_FIFOCTRL 0x44 /* FIFO status and control register */
+
+/* FIFO memory AC characteristic register */
+#define S5P_DSIM_PLLCTRL 0x4c /* PLL control register */
+#define S5P_DSIM_PLLTMR 0x50 /* PLL timer register */
+#define S5P_DSIM_PHYACCHR 0x54 /* D-PHY AC characteristic register */
+#define S5P_DSIM_PHYACCHR1 0x58 /* D-PHY AC characteristic register1 */
+
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK (1 << 8)
+#define DSIM_TX_READY_HS_CLK (1 << 10)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST (1 << 16)
+#define DSIM_SWRST (1 << 0)
+
+/* S5P_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT(x) ((x) << 0)
+#define DSIM_BTA_TOUT_SHIFT(x) ((x) << 16)
+
+/* S5P_DSIM_CLKCTRL */
+#define DSIM_LANE_ESC_CLKEN(x) (((x) & 0x1f) << 19)
+#define DSIM_BYTE_CLKEN_SHIFT(x) ((x) << 24)
+#define DSIM_BYTE_CLK_SRC_SHIFT(x) ((x) << 25)
+#define DSIM_PLL_BYPASS_SHIFT(x) ((x) << 27)
+#define DSIM_ESC_CLKEN_SHIFT(x) ((x) << 28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT(x) ((x) << 31)
+
+/* S5P_DSIM_CONFIG */
+#define DSIM_LANE_ENx(x) (((x) & 0x1f) << 0)
+#define DSIM_NUM_OF_DATALANE_SHIFT(x) ((x) << 5)
+#define DSIM_HSA_MODE_SHIFT(x) ((x) << 20)
+#define DSIM_HBP_MODE_SHIFT(x) ((x) << 21)
+#define DSIM_HFP_MODE_SHIFT(x) ((x) << 22)
+#define DSIM_HSE_MODE_SHIFT(x) ((x) << 23)
+#define DSIM_AUTO_MODE_SHIFT(x) ((x) << 24)
+#define DSIM_EOT_DISABLE(x) ((x) << 28)
+#define DSIM_AUTO_FLUSH(x) ((x) << 29)
+
+#define DSIM_NUM_OF_DATA_LANE(x) ((x) << DSIM_NUM_OF_DATALANE_SHIFT)
+
+/* S5P_DSIM_ESCMODE */
+#define DSIM_TX_LPDT_LP (1 << 6)
+#define DSIM_CMD_LPDT_LP (1 << 7)
+#define DSIM_FORCE_STOP_STATE_SHIFT(x) ((x) << 20)
+#define DSIM_STOP_STATE_CNT_SHIFT(x) ((x) << 21)
+
+/* S5P_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY (1 << 31)
+#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0)
+
+/* S5P_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT(x) ((x) << 28)
+#define DSIM_STABLE_VFP_SHIFT(x) ((x) << 16)
+#define DSIM_MAIN_VBP_SHIFT(x) ((x) << 0)
+#define DSIM_CMD_ALLOW_MASK (0xf << 28)
+#define DSIM_STABLE_VFP_MASK (0x7ff << 16)
+#define DSIM_MAIN_VBP_MASK (0x7ff << 0)
+
+/* S5P_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT(x) ((x) << 16)
+#define DSIM_MAIN_HBP_SHIFT(x) ((x) << 0)
+#define DSIM_MAIN_HFP_MASK ((0xffff) << 16)
+#define DSIM_MAIN_HBP_MASK ((0xffff) << 0)
+
+/* S5P_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT(x) ((x) << 22)
+#define DSIM_MAIN_HSA_SHIFT(x) ((x) << 0)
+#define DSIM_MAIN_VSA_MASK ((0x3ff) << 22)
+#define DSIM_MAIN_HSA_MASK ((0xffff) << 0)
+
+/* S5P_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT(x) ((x) << 31)
+#define DSIM_SUB_VRESOL_SHIFT(x) ((x) << 16)
+#define DSIM_SUB_HRESOL_SHIFT(x) ((x) << 0)
+#define DSIM_SUB_STANDY_MASK ((0x1) << 31)
+#define DSIM_SUB_VRESOL_MASK ((0x7ff) << 16)
+#define DSIM_SUB_HRESOL_MASK ((0x7ff) << 0)
+
+/* S5P_DSIM_INTSRC */
+#define INTSRC_PLL_STABLE (1 << 31)
+#define INTSRC_SW_RST_RELEASE (1 << 30)
+#define INTSRC_SFR_FIFO_EMPTY (1 << 29)
+#define INTSRC_FRAME_DONE (1 << 24)
+#define INTSRC_RX_DATA_DONE (1 << 18)
+
+/* S5P_DSIM_INTMSK */
+#define INTMSK_FIFO_EMPTY (1 << 29)
+#define INTMSK_BTA (1 << 25)
+#define INTMSK_FRAME_DONE (1 << 24)
+#define INTMSK_RX_TIMEOUT (1 << 21)
+#define INTMSK_BTA_TIMEOUT (1 << 20)
+#define INTMSK_RX_DONE (1 << 18)
+#define INTMSK_RX_TE (1 << 17)
+#define INTMSK_RX_ACK (1 << 16)
+#define INTMSK_RX_ECC_ERR (1 << 15)
+#define INTMSK_RX_CRC_ERR (1 << 14)
+
+/* S5P_DSIM_FIFOCTRL */
+#define SFR_HEADER_EMPTY (1 << 22)
+
+/* S5P_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5)
+
+/* S5P_DSIM_PLLCTRL */
+#define DSIM_PLL_EN_SHIFT(x) ((x) << 23)
+#define DSIM_FREQ_BAND_SHIFT(x) ((x) << 24)
+
+#endif /* _REGS_DSIM_H */
diff --git a/include/linux/mipi_dsim.h b/include/linux/mipi_dsim.h
new file mode 100644
index 0000000..cedfc28
--- /dev/null
+++ b/include/linux/mipi_dsim.h
@@ -0,0 +1,359 @@
+/* include/linux/mipi_dsim.h
+ *
+ * Platform data header for Samsung SoC MIPI-DSIM.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _LINUX_MIPI_DSIM_H
+#define _LINUX_MIPI_DSIM_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE (32)
+
+/*
+ * Enumerate display interface type.
+ *
+ * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
+ *
+ * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
+ * for main display and CPU Interface(same as I80 Interface) for main
+ * and sub display.
+ */
+enum mipi_dsim_interface_type {
+ DSIM_COMMAND,
+ DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+ DSIM_VIRTUAL_CH_0,
+ DSIM_VIRTUAL_CH_1,
+ DSIM_VIRTUAL_CH_2,
+ DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+ DSIM_NON_BURST_SYNC_EVENT,
+ DSIM_BURST_SYNC_EVENT,
+ DSIM_NON_BURST_SYNC_PULSE,
+ DSIM_BURST,
+ DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+ DSIM_DATA_LANE_1,
+ DSIM_DATA_LANE_2,
+ DSIM_DATA_LANE_3,
+ DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+ DSIM_PLL_OUT_DIV8,
+ DSIM_EXT_CLK_DIV8,
+ DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+ DSIM_CMD_3BPP,
+ DSIM_CMD_8BPP,
+ DSIM_CMD_12BPP,
+ DSIM_CMD_16BPP,
+ DSIM_VID_16BPP_565,
+ DSIM_VID_18BPP_666PACKED,
+ DSIM_18BPP_666LOOSELYPACKED,
+ DSIM_24BPP_888
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ * in Video mode, the vertical line transition uses line counter
+ * configured by VSA, VBP, and Vertical resolution.
+ * If this bit is set to '1', the line counter does not use VSA and VBP
+ * registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ * start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ * (in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ * if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ * if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ * if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @cma_allow: specifies the number of horizontal lines, where command packet
+ * transmission is allowed after Stable VFP period.
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ * sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ * in Non-burst mode, RGB data area is filled with RGB data and NULL
+ * packets, according to input bandwidth of RGB interface.
+ * In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ * clock(System clock cycle base)
+ * if the timer value goes to 0x00000000, the clock stable bit of status
+ * and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ * prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ * read packet(or write "set_tear_on" command) and BTA request.
+ * after transmitting read packet or write "set_tear_on" command,
+ * BTA requests to D-PHY automatically. this counter value specifies
+ * the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ * this register specifies time out from BTA request to change
+ * the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ * this register specifies time out on how long RxValid deasserts,
+ * after RxLpdt asserts with respect to Tx escape clock.
+ * - RxValid specifies Rx data valid indicator.
+ * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ * - RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+ unsigned char auto_flush;
+ unsigned char eot_disable;
+
+ unsigned char auto_vertical_cnt;
+ unsigned char hse;
+ unsigned char hfp;
+ unsigned char hbp;
+ unsigned char hsa;
+ unsigned char cmd_allow;
+
+ enum mipi_dsim_interface_type e_interface;
+ enum mipi_dsim_virtual_ch_no e_virtual_ch;
+ enum mipi_dsim_pixel_format e_pixel_format;
+ enum mipi_dsim_burst_mode_type e_burst_mode;
+ enum mipi_dsim_no_of_data_lane e_no_data_lane;
+ enum mipi_dsim_byte_clk_src e_byte_clk;
+
+ /*
+ * =====================+ * | P | M | S | MHz |
+ * -------------------------------------------
+ * | 3 | 100 | 3 | 100 |
+ * | 3 | 100 | 2 | 200 |
+ * | 3 | 63 | 1 | 252 |
+ * | 4 | 100 | 1 | 300 |
+ * | 4 | 110 | 1 | 330 |
+ * | 12 | 350 | 1 | 350 |
+ * | 3 | 100 | 1 | 400 |
+ * | 4 | 150 | 1 | 450 |
+ * | 6 | 118 | 1 | 472 |
+ * | 3 | 120 | 1 | 480 |
+ * | 12 | 250 | 0 | 500 |
+ * | 4 | 100 | 0 | 600 |
+ * | 3 | 81 | 0 | 648 |
+ * | 3 | 88 | 0 | 704 |
+ * | 3 | 90 | 0 | 720 |
+ * | 3 | 100 | 0 | 800 |
+ * | 12 | 425 | 0 | 850 |
+ * | 4 | 150 | 0 | 900 |
+ * | 12 | 475 | 0 | 950 |
+ * | 6 | 250 | 0 | 1000 |
+ * -------------------------------------------
+ */
+
+ /*
+ * pms could be calculated as the following.
+ * M * 24 / P * 2 ^ S = MHz
+ */
+ unsigned char p;
+ unsigned short m;
+ unsigned char s;
+
+ unsigned int pll_stable_time;
+ unsigned long esc_clk;
+
+ unsigned short stop_holding_cnt;
+ unsigned char bta_timeout;
+ unsigned short rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @id: unique device id.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ * (virtual address)
+ * @lock: the mutex protecting this data structure.
+ * @dsim_info: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ * (it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ * (it would be registered by mipi-dsi driver.)
+ * @lcd_info: pointer to mipi_lcd_info structure.
+ * @state: specifies status of MIPI-DSI controller.
+ * the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ * this variable would be set by driver according to e_no_data_lane
+ * automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+ struct device *dev;
+ int id;
+ struct resource *res;
+ struct clk *clock;
+ unsigned int irq;
+ void __iomem *reg_base;
+ struct mutex lock;
+
+ struct mipi_dsim_config *dsim_config;
+ struct mipi_dsim_master_ops *master_ops;
+ struct mipi_dsim_lcd_device *dsim_lcd_dev;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+ unsigned int state;
+ unsigned int data_lane;
+ unsigned int e_clk_src;
+ bool suspended;
+
+ struct mipi_dsim_platform_data *pd;
+};
+
+/*
+ * struct mipi_dsim_platform_data - interface to platform data
+ * for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ * lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @enabled: indicate whether mipi controller got enabled or not.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ * this structure specifies width, height, timing and polarity and so on.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct mipi_dsim_platform_data {
+ char lcd_panel_name[PANEL_NAME_SIZE];
+
+ struct mipi_dsim_config *dsim_config;
+ unsigned int enabled;
+ void *lcd_panel_info;
+
+ int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ * transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ * - this one would be used only in case of CPU mode.
+ * @set_early_blank_mode: set framebuffer blank mode.
+ * - this callback should be called prior to fb_blank() by a client driver
+ * only if needing.
+ * @set_blank_mode: set framebuffer blank mode.
+ * - this callback should be called after fb_blank() by a client driver
+ * only if needing.
+ */
+
+struct mipi_dsim_master_ops {
+ int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned char *data0, unsigned int data1);
+ int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf);
+ int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+ int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+ int (*get_fb_frame_done)(struct fb_info *info);
+ void (*trigger)(struct fb_info *info);
+ int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
+ int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ * alias for that name.
+ * @dev: driver model representation of the device.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ * and this bus id should be same as id of mipi_dsim_device.
+ * @irq: irq number for signaling when framebuffer transfer of
+ * lcd panel module is completed.
+ * this irq would be used only for MIPI-DSI based CPU mode lcd panel.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+ char *name;
+ struct device dev;
+ int id;
+ int bus_id;
+ int irq;
+
+ struct mipi_dsim_device *master;
+ void *platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ * alias for that name.
+ * @id: id of driver to be registered.
+ * this id would be used for finding device object registered.
+ */
+struct mipi_dsim_lcd_driver {
+ char *name;
+ int id;
+
+ void (*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
+ void (*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*probe)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*remove)(struct mipi_dsim_lcd_device *dsim_dev);
+ void (*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*resume)(struct mipi_dsim_lcd_device *dsim_dev);
+};
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int s5p_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+ *lcd_dev);
+/**
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int s5p_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+ *lcd_drv);
+#endif /* _LINUX_MIPI_DSIM_H */
--
1.7.4.1
^ permalink raw reply related
* [PATCH v5 2/2] video: backlight: support s6e8ax0 panel driver based on
From: Donghwa Lee @ 2011-12-21 4:25 UTC (permalink / raw)
To: linux-arm-kernel
This patch is amoled panel driver based MIPI DSI interface.
S6E8AX0 means it may includes many other ldi controllers, for example,
S6E8AA0, S6E8AB0, and so on.
This patch can be modified depending on each panel properites. For example,
second parameter of panel condition register can be changed depending on
ldi controller or amoled type.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/s6e8ax0.c | 898 +++++++++++++++++++++++++++++++++++++
drivers/video/backlight/s6e8ax0.h | 26 ++
4 files changed, 932 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/backlight/s6e8ax0.c
create mode 100644 drivers/video/backlight/s6e8ax0.h
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 278aeaa..478fc4a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -125,6 +125,13 @@ config LCD_AMS369FG06
If you have an AMS369FG06 AMOLED Panel, say Y to enable its
LCD control driver.
+config LCD_S6E8AX0
+ tristate "S6E8AX0 MIPI AMOLED LCD Driver"
+ depends on S5P_MIPI_DSI && BACKLIGHT_CLASS_DEVICE
+ default n
+ help
+ If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
+ LCD control driver.
endif # LCD_CLASS_DEVICE
#
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fdd1fc4..6adba58 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o
obj-$(CONFIG_LCD_LD9040) += ld9040.o
obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o
+obj-$(CONFIG_LCD_S6E8AX0) += s6e8ax0.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
diff --git a/drivers/video/backlight/s6e8ax0.c b/drivers/video/backlight/s6e8ax0.c
new file mode 100644
index 0000000..bcd2674
--- /dev/null
+++ b/drivers/video/backlight/s6e8ax0.c
@@ -0,0 +1,898 @@
+/* linux/drivers/video/s6e8ax0.c
+ *
+ * MIPI-DSI based s6e8ax0 AMOLED lcd 4.65 inch panel driver.
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mipi_dsim.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#define LDI_MTP_LENGTH 24
+#define DSIM_PM_STABLE_TIME (10)
+#define MIN_BRIGHTNESS (0)
+#define MAX_BRIGHTNESS (24)
+
+#define POWER_IS_ON(pwr) ((pwr) = FB_BLANK_UNBLANK)
+#define POWER_IS_OFF(pwr) ((pwr) = FB_BLANK_POWERDOWN)
+#define POWER_IS_NRM(pwr) ((pwr) = FB_BLANK_NORMAL)
+
+#define lcd_to_master(a) (a->dsim_dev->master)
+#define lcd_to_master_ops(a) ((lcd_to_master(a))->master_ops)
+
+enum {
+ DSIM_NONE_STATE = 0,
+ DSIM_RESUME_COMPLETE = 1,
+ DSIM_FRAME_DONE = 2,
+};
+
+struct s6e8ax0 {
+ struct device *dev;
+ unsigned int power;
+ unsigned int id;
+ unsigned int gamma;
+ unsigned int acl_enable;
+ unsigned int cur_acl;
+
+ struct lcd_device *ld;
+ struct backlight_device *bd;
+
+ struct mipi_dsim_lcd_device *dsim_dev;
+ struct lcd_platform_data *ddi_pd;
+ struct mutex lock;
+ bool enabled;
+};
+
+
+static struct regulator_bulk_data supplies[] = {
+ { .supply = "vdd3", },
+ { .supply = "vci", },
+};
+
+static void s6e8ax0_regulator_enable(struct s6e8ax0 *lcd)
+{
+ int ret = 0;
+ struct lcd_platform_data *pd = NULL;
+
+ pd = lcd->ddi_pd;
+ mutex_lock(&lcd->lock);
+ if (!lcd->enabled) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+ if (ret)
+ goto out;
+
+ lcd->enabled = true;
+ }
+ msleep(pd->power_on_delay);
+out:
+ mutex_unlock(&lcd->lock);
+}
+
+static void s6e8ax0_regulator_disable(struct s6e8ax0 *lcd)
+{
+ int ret = 0;
+
+ mutex_lock(&lcd->lock);
+ if (lcd->enabled) {
+ ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+ if (ret)
+ goto out;
+
+ lcd->enabled = false;
+ }
+out:
+ mutex_unlock(&lcd->lock);
+}
+
+static unsigned char s6e8ax0_22_gamma_30[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xF5, 0x00, 0xFF, 0xAD, 0xAF,
+ 0xBA, 0xC3, 0xD8, 0xC5, 0x9F, 0xC6, 0x9E, 0xC1, 0xDC, 0xC0,
+ 0x00, 0x61, 0x00, 0x5A, 0x00, 0x74,
+};
+
+static unsigned char s6e8ax0_22_gamma_50[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xE8, 0x1F, 0xF7, 0xAD, 0xC0,
+ 0xB5, 0xC4, 0xDC, 0xC4, 0x9E, 0xC6, 0x9C, 0xBB, 0xD8, 0xBB,
+ 0x00, 0x70, 0x00, 0x68, 0x00, 0x86,
+};
+
+static unsigned char s6e8ax0_22_gamma_60[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xDE, 0x1F, 0xEF, 0xAD, 0xC4,
+ 0xB3, 0xC3, 0xDD, 0xC4, 0x9E, 0xC6, 0x9C, 0xBC, 0xD6, 0xBA,
+ 0x00, 0x75, 0x00, 0x6E, 0x00, 0x8D,
+};
+
+static unsigned char s6e8ax0_22_gamma_70[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xD8, 0x1F, 0xE7, 0xAF, 0xC8,
+ 0xB4, 0xC4, 0xDD, 0xC3, 0x9D, 0xC6, 0x9C, 0xBB, 0xD6, 0xB9,
+ 0x00, 0x7A, 0x00, 0x72, 0x00, 0x93,
+};
+
+static unsigned char s6e8ax0_22_gamma_80[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xC9, 0x1F, 0xDE, 0xAE, 0xC9,
+ 0xB1, 0xC3, 0xDD, 0xC2, 0x9D, 0xC5, 0x9B, 0xBC, 0xD6, 0xBB,
+ 0x00, 0x7F, 0x00, 0x77, 0x00, 0x99,
+};
+
+static unsigned char s6e8ax0_22_gamma_90[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xC7, 0x1F, 0xD9, 0xB0, 0xCC,
+ 0xB2, 0xC3, 0xDC, 0xC1, 0x9C, 0xC6, 0x9C, 0xBC, 0xD4, 0xB9,
+ 0x00, 0x83, 0x00, 0x7B, 0x00, 0x9E,
+};
+
+static unsigned char s6e8ax0_22_gamma_100[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xBD, 0x80, 0xCD, 0xB1, 0xCE,
+ 0xB3, 0xC4, 0xDE, 0xC3, 0x9C, 0xC4, 0x9A, 0xB8, 0xD3, 0xB6,
+ 0x00, 0x88, 0x00, 0x80, 0x00, 0xA5,
+};
+
+static unsigned char s6e8ax0_22_gamma_120[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB9, 0x95, 0xC8, 0xB1, 0xCF,
+ 0xB2, 0xC6, 0xDF, 0xC5, 0x9B, 0xC3, 0x99, 0xB6, 0xD2, 0xB6,
+ 0x00, 0x8F, 0x00, 0x86, 0x00, 0xAC,
+};
+
+static unsigned char s6e8ax0_22_gamma_130[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB7, 0xA0, 0xC7, 0xB1, 0xD0,
+ 0xB2, 0xC4, 0xDD, 0xC3, 0x9A, 0xC3, 0x98, 0xB6, 0xD0, 0xB4,
+ 0x00, 0x92, 0x00, 0x8A, 0x00, 0xB1,
+};
+
+static unsigned char s6e8ax0_22_gamma_140[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB7, 0xA0, 0xC5, 0xB2, 0xD0,
+ 0xB3, 0xC3, 0xDE, 0xC3, 0x9B, 0xC2, 0x98, 0xB6, 0xD0, 0xB4,
+ 0x00, 0x95, 0x00, 0x8D, 0x00, 0xB5,
+};
+
+static unsigned char s6e8ax0_22_gamma_150[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB3, 0xA0, 0xC2, 0xB2, 0xD0,
+ 0xB2, 0xC1, 0xDD, 0xC2, 0x9B, 0xC2, 0x98, 0xB4, 0xCF, 0xB1,
+ 0x00, 0x99, 0x00, 0x90, 0x00, 0xBA,
+};
+
+static unsigned char s6e8ax0_22_gamma_160[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xA5, 0xBF, 0xB0, 0xD0,
+ 0xB1, 0xC3, 0xDE, 0xC2, 0x99, 0xC1, 0x97, 0xB4, 0xCE, 0xB1,
+ 0x00, 0x9C, 0x00, 0x93, 0x00, 0xBE,
+};
+
+static unsigned char s6e8ax0_22_gamma_170[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB5, 0xBF, 0xB1, 0xD1,
+ 0xB1, 0xC3, 0xDE, 0xC3, 0x99, 0xC0, 0x96, 0xB4, 0xCE, 0xB1,
+ 0x00, 0x9F, 0x00, 0x96, 0x00, 0xC2,
+};
+
+static unsigned char s6e8ax0_22_gamma_180[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB7, 0xBE, 0xB3, 0xD2,
+ 0xB3, 0xC3, 0xDE, 0xC2, 0x97, 0xBF, 0x95, 0xB4, 0xCD, 0xB1,
+ 0x00, 0xA2, 0x00, 0x99, 0x00, 0xC5,
+};
+
+static unsigned char s6e8ax0_22_gamma_190[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB9, 0xBE, 0xB2, 0xD2,
+ 0xB2, 0xC3, 0xDD, 0xC3, 0x98, 0xBF, 0x95, 0xB2, 0xCC, 0xAF,
+ 0x00, 0xA5, 0x00, 0x9C, 0x00, 0xC9,
+};
+
+static unsigned char s6e8ax0_22_gamma_200[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xAF, 0xB9, 0xBC, 0xB2, 0xD2,
+ 0xB1, 0xC4, 0xDD, 0xC3, 0x97, 0xBE, 0x95, 0xB1, 0xCB, 0xAE,
+ 0x00, 0xA8, 0x00, 0x9F, 0x00, 0xCD,
+};
+
+static unsigned char s6e8ax0_22_gamma_210[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xC1, 0xBD, 0xB1, 0xD1,
+ 0xB1, 0xC2, 0xDE, 0xC2, 0x97, 0xBE, 0x94, 0xB0, 0xC9, 0xAD,
+ 0x00, 0xAE, 0x00, 0xA4, 0x00, 0xD4,
+};
+
+static unsigned char s6e8ax0_22_gamma_220[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xC7, 0xBD, 0xB1, 0xD1,
+ 0xB1, 0xC2, 0xDD, 0xC2, 0x97, 0xBD, 0x94, 0xB0, 0xC9, 0xAD,
+ 0x00, 0xAD, 0x00, 0xA2, 0x00, 0xD3,
+};
+
+static unsigned char s6e8ax0_22_gamma_230[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xC3, 0xBD, 0xB2, 0xD1,
+ 0xB1, 0xC3, 0xDD, 0xC1, 0x96, 0xBD, 0x94, 0xB0, 0xC9, 0xAD,
+ 0x00, 0xB0, 0x00, 0xA7, 0x00, 0xD7,
+};
+
+static unsigned char s6e8ax0_22_gamma_240[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB1, 0xCB, 0xBD, 0xB1, 0xD2,
+ 0xB1, 0xC3, 0xDD, 0xC2, 0x95, 0xBD, 0x93, 0xAF, 0xC8, 0xAB,
+ 0x00, 0xB3, 0x00, 0xA9, 0x00, 0xDB,
+};
+
+static unsigned char s6e8ax0_22_gamma_250[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB3, 0xCC, 0xBE, 0xB0, 0xD2,
+ 0xB0, 0xC3, 0xDD, 0xC2, 0x94, 0xBC, 0x92, 0xAE, 0xC8, 0xAB,
+ 0x00, 0xB6, 0x00, 0xAB, 0x00, 0xDE,
+};
+
+static unsigned char s6e8ax0_22_gamma_260[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB3, 0xD0, 0xBE, 0xAF, 0xD1,
+ 0xAF, 0xC2, 0xDD, 0xC1, 0x96, 0xBC, 0x93, 0xAF, 0xC8, 0xAC,
+ 0x00, 0xB7, 0x00, 0xAD, 0x00, 0xE0,
+};
+
+static unsigned char s6e8ax0_22_gamma_270[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB2, 0xCF, 0xBD, 0xB0, 0xD2,
+ 0xAF, 0xC2, 0xDC, 0xC1, 0x95, 0xBD, 0x93, 0xAE, 0xC6, 0xAA,
+ 0x00, 0xBA, 0x00, 0xB0, 0x00, 0xE4,
+};
+
+static unsigned char s6e8ax0_22_gamma_280[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB2, 0xD0, 0xBD, 0xAF, 0xD0,
+ 0xAD, 0xC4, 0xDD, 0xC3, 0x95, 0xBD, 0x93, 0xAC, 0xC5, 0xA9,
+ 0x00, 0xBD, 0x00, 0xB2, 0x00, 0xE7,
+};
+
+static unsigned char s6e8ax0_22_gamma_300[] = {
+ 0xFA, 0x01, 0x60, 0x10, 0x60, 0xB5, 0xD3, 0xBD, 0xB1, 0xD2,
+ 0xB0, 0xC0, 0xDC, 0xC0, 0x94, 0xBA, 0x91, 0xAC, 0xC5, 0xA9,
+ 0x00, 0xC2, 0x00, 0xB7, 0x00, 0xED,
+};
+
+static unsigned char *s6e8ax0_22_gamma_table[] = {
+ s6e8ax0_22_gamma_30,
+ s6e8ax0_22_gamma_50,
+ s6e8ax0_22_gamma_60,
+ s6e8ax0_22_gamma_70,
+ s6e8ax0_22_gamma_80,
+ s6e8ax0_22_gamma_90,
+ s6e8ax0_22_gamma_100,
+ s6e8ax0_22_gamma_120,
+ s6e8ax0_22_gamma_130,
+ s6e8ax0_22_gamma_140,
+ s6e8ax0_22_gamma_150,
+ s6e8ax0_22_gamma_160,
+ s6e8ax0_22_gamma_170,
+ s6e8ax0_22_gamma_180,
+ s6e8ax0_22_gamma_190,
+ s6e8ax0_22_gamma_200,
+ s6e8ax0_22_gamma_210,
+ s6e8ax0_22_gamma_220,
+ s6e8ax0_22_gamma_230,
+ s6e8ax0_22_gamma_240,
+ s6e8ax0_22_gamma_250,
+ s6e8ax0_22_gamma_260,
+ s6e8ax0_22_gamma_270,
+ s6e8ax0_22_gamma_280,
+ s6e8ax0_22_gamma_300,
+};
+
+static void s6e8ax0_panel_cond(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+ unsigned char data_to_send[] = {
+ 0xf8, 0x3d, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c,
+ 0x7d, 0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20,
+ 0x04, 0x08, 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08,
+ 0x23, 0x23, 0xc0, 0xc8, 0x08, 0x48, 0xc1, 0x00, 0xc1,
+ 0xff, 0xff, 0xc8
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_cond(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf2, 0x80, 0x03, 0x0d
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+/* Gamma 2.2 Setting (200cd, 7500K, 10MPCD) */
+static void s6e8ax0_gamma_cond(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned int gamma = lcd->bd->props.brightness;
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ s6e8ax0_22_gamma_table[gamma],
+ ARRAY_SIZE(s6e8ax0_22_gamma_table));
+}
+
+static void s6e8ax0_gamma_update(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf7, 0x03
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send,
+ ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond1(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xd1, 0xfe, 0x80, 0x00, 0x01, 0x0b, 0x00, 0x00, 0x40,
+ 0x0d, 0x00, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond2(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb6, 0x0c, 0x02, 0x03, 0x32, 0xff, 0x44, 0x44, 0xc0,
+ 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond3(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe1, 0x10, 0x1c, 0x17, 0x08, 0x1d
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond4(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe2, 0xed, 0x07, 0xc3, 0x13, 0x0d, 0x03
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond5(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf4, 0xcf, 0x0a, 0x12, 0x10, 0x19, 0x33, 0x02
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+static void s6e8ax0_etc_cond6(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe3, 0x40
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE_PARAM,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond7(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xe4, 0x00, 0x00, 0x14, 0x80, 0x00, 0x00, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_elvss_set(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xb1, 0x04, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_elvss_nvm_set(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xd9, 0x5c, 0x20, 0x0c, 0x0f, 0x41, 0x00, 0x10, 0x11,
+ 0x12, 0xd1, 0x00, 0x00, 0x00, 0x00, 0x80, 0xcb, 0xed,
+ 0x64, 0xaf
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_sleep_in(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x10, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_sleep_out(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x11, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_on(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x29, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_off(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0x28, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_apply_level2_key(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xf0, 0x5a, 0x5a
+ };
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_acl_on(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xc0, 0x01
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_acl_off(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ unsigned char data_to_send[] = {
+ 0xc0, 0x00
+ };
+
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_SHORT_WRITE,
+ data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+/* Full white 50% reducing setting */
+static void s6e8ax0_acl_ctrl_set(struct s6e8ax0 *lcd)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ /* Full white 50% reducing setting */
+ unsigned char cutoff_50[] = {
+ 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+ 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x08, 0x0f, 0x16, 0x1d, 0x24, 0x2a, 0x31, 0x38,
+ 0x3f, 0x46
+ };
+ /* Full white 45% reducing setting */
+ unsigned char cutoff_45[] = {
+ 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+ 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x07, 0x0d, 0x13, 0x19, 0x1f, 0x25, 0x2b, 0x31,
+ 0x37, 0x3d
+ };
+ /* Full white 40% reducing setting */
+ unsigned char cutoff_40[] = {
+ 0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+ 0x00, 0x00, 0x04, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x06, 0x0c, 0x11, 0x16, 0x1c, 0x21, 0x26, 0x2b,
+ 0x31, 0x36
+ };
+
+ if (lcd->acl_enable) {
+ if (lcd->cur_acl = 0) {
+ if (lcd->gamma = 0 || lcd->gamma = 1) {
+ s6e8ax0_acl_off(lcd);
+ dev_dbg(&lcd->ld->dev,
+ "cur_acl=%d\n", lcd->cur_acl);
+ } else
+ s6e8ax0_acl_on(lcd);
+ }
+ switch (lcd->gamma) {
+ case 0: /* 30cd */
+ s6e8ax0_acl_off(lcd);
+ lcd->cur_acl = 0;
+ break;
+ case 1 ... 3: /* 50cd ~ 90cd */
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_LONG_WRITE,
+ cutoff_40,
+ ARRAY_SIZE(cutoff_40));
+ lcd->cur_acl = 40;
+ break;
+ case 4 ... 7: /* 120cd ~ 210cd */
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_LONG_WRITE,
+ cutoff_45,
+ ARRAY_SIZE(cutoff_45));
+ lcd->cur_acl = 45;
+ break;
+ case 8 ... 10: /* 220cd ~ 300cd */
+ ops->cmd_write(lcd_to_master(lcd),
+ MIPI_DSI_DCS_LONG_WRITE,
+ cutoff_50,
+ ARRAY_SIZE(cutoff_50));
+ lcd->cur_acl = 50;
+ break;
+ default:
+ break;
+ }
+ } else {
+ s6e8ax0_acl_off(lcd);
+ lcd->cur_acl = 0;
+ dev_dbg(&lcd->ld->dev, "cur_acl = %d\n", lcd->cur_acl);
+ }
+}
+
+static void s6e8ax0_read_id(struct s6e8ax0 *lcd, u8 *mtp_id)
+{
+ unsigned int ret;
+ unsigned int addr = 0xd1; /* MTP ID */
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+ ret = ops->cmd_read(lcd_to_master(lcd),
+ MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM,
+ addr, 3, mtp_id);
+}
+
+static int s6e8ax0_panel_init(struct s6e8ax0 *lcd)
+{
+ s6e8ax0_apply_level2_key(lcd);
+ s6e8ax0_sleep_out(lcd);
+ msleep(1);
+ s6e8ax0_panel_cond(lcd);
+ s6e8ax0_display_cond(lcd);
+ s6e8ax0_gamma_cond(lcd);
+ s6e8ax0_gamma_update(lcd);
+
+ s6e8ax0_etc_cond1(lcd);
+ s6e8ax0_etc_cond2(lcd);
+ s6e8ax0_etc_cond3(lcd);
+ s6e8ax0_etc_cond4(lcd);
+ s6e8ax0_etc_cond5(lcd);
+ s6e8ax0_etc_cond6(lcd);
+ s6e8ax0_etc_cond7(lcd);
+
+ s6e8ax0_elvss_nvm_set(lcd);
+ s6e8ax0_elvss_set(lcd);
+
+ s6e8ax0_acl_ctrl_set(lcd);
+ s6e8ax0_acl_on(lcd);
+
+ /* if ID3 value is not 33h, branch private elvss mode */
+ msleep(lcd->ddi_pd->power_on_delay);
+
+ return 0;
+}
+
+static int s6e8ax0_update_gamma_ctrl(struct s6e8ax0 *lcd, int brightness)
+{
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+ ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+ s6e8ax0_22_gamma_table[brightness],
+ ARRAY_SIZE(s6e8ax0_22_gamma_table));
+
+ /* update gamma table. */
+ s6e8ax0_gamma_update(lcd);
+ lcd->gamma = brightness;
+
+ return 0;
+}
+
+static int s6e8ax0_gamma_ctrl(struct s6e8ax0 *lcd, int gamma)
+{
+ s6e8ax0_update_gamma_ctrl(lcd, gamma);
+
+ return 0;
+}
+
+static int s6e8ax0_set_power(struct lcd_device *ld, int power)
+{
+ struct s6e8ax0 *lcd = lcd_get_data(ld);
+ struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+ int ret = 0;
+
+ if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+ power != FB_BLANK_NORMAL) {
+ dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+ return -EINVAL;
+ }
+
+ if ((power = FB_BLANK_UNBLANK) && ops->set_blank_mode) {
+ /* LCD power on */
+ if ((POWER_IS_ON(power) && POWER_IS_OFF(lcd->power))
+ || (POWER_IS_ON(power) && POWER_IS_NRM(lcd->power))) {
+ ret = ops->set_blank_mode(lcd_to_master(lcd), power);
+ if (!ret && lcd->power != power)
+ lcd->power = power;
+ }
+ } else if ((power = FB_BLANK_POWERDOWN) && ops->set_early_blank_mode) {
+ /* LCD power off */
+ if ((POWER_IS_OFF(power) && POWER_IS_ON(lcd->power)) ||
+ (POWER_IS_ON(lcd->power) && POWER_IS_NRM(power))) {
+ ret = ops->set_early_blank_mode(lcd_to_master(lcd),
+ power);
+ if (!ret && lcd->power != power)
+ lcd->power = power;
+ }
+ }
+
+ return ret;
+}
+
+static int s6e8ax0_get_power(struct lcd_device *ld)
+{
+ struct s6e8ax0 *lcd = lcd_get_data(ld);
+
+ return lcd->power;
+}
+
+static int s6e8ax0_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int s6e8ax0_set_brightness(struct backlight_device *bd)
+{
+ int ret = 0, brightness = bd->props.brightness;
+ struct s6e8ax0 *lcd = bl_get_data(bd);
+
+ if (brightness < MIN_BRIGHTNESS ||
+ brightness > bd->props.max_brightness) {
+ dev_err(lcd->dev, "lcd brightness should be %d to %d.\n",
+ MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+ return -EINVAL;
+ }
+
+ ret = s6e8ax0_gamma_ctrl(lcd, brightness);
+ if (ret) {
+ dev_err(&bd->dev, "lcd brightness setting failed.\n");
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static struct lcd_ops s6e8ax0_lcd_ops = {
+ .set_power = s6e8ax0_set_power,
+ .get_power = s6e8ax0_get_power,
+};
+
+static struct backlight_ops s6e8ax0_backlight_ops = {
+ .get_brightness = s6e8ax0_get_brightness,
+ .update_status = s6e8ax0_set_brightness,
+};
+
+static void s6e8ax0_power_on(struct mipi_dsim_lcd_device *dsim_dev, int power)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ msleep(lcd->ddi_pd->power_on_delay);
+
+ /* lcd power on */
+ if (power)
+ s6e8ax0_regulator_enable(lcd);
+ else
+ s6e8ax0_regulator_disable(lcd);
+
+ msleep(lcd->ddi_pd->reset_delay);
+
+ /* lcd reset */
+ if (lcd->ddi_pd->reset)
+ lcd->ddi_pd->reset(lcd->ld);
+ msleep(5);
+}
+
+static void s6e8ax0_set_sequence(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ s6e8ax0_panel_init(lcd);
+ s6e8ax0_display_on(lcd);
+
+ lcd->power = FB_BLANK_UNBLANK;
+}
+
+static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd;
+ int ret;
+ u8 mtp_id[3] = {0, };
+
+ lcd = kzalloc(sizeof(struct s6e8ax0), GFP_KERNEL);
+ if (!lcd) {
+ dev_err(&dsim_dev->dev, "failed to allocate s6e8ax0 structure.\n");
+ return -ENOMEM;
+ }
+
+ lcd->dsim_dev = dsim_dev;
+ lcd->ddi_pd = (struct lcd_platform_data *)dsim_dev->platform_data;
+ lcd->dev = &dsim_dev->dev;
+
+ mutex_init(&lcd->lock);
+
+ ret = regulator_bulk_get(lcd->dev, ARRAY_SIZE(supplies), supplies);
+ if (ret) {
+ dev_err(lcd->dev, "Failed to get regulators: %d\n", ret);
+ goto err_lcd_register;
+ }
+
+ lcd->ld = lcd_device_register("s6e8ax0", lcd->dev, lcd,
+ &s6e8ax0_lcd_ops);
+ if (IS_ERR(lcd->ld)) {
+ dev_err(lcd->dev, "failed to register lcd ops.\n");
+ ret = PTR_ERR(lcd->ld);
+ goto err_lcd_register;
+ }
+
+ lcd->bd = backlight_device_register("s6e8ax0-bl", lcd->dev, lcd,
+ &s6e8ax0_backlight_ops, NULL);
+ if (IS_ERR(lcd->bd)) {
+ dev_err(lcd->dev, "failed to register backlight ops.\n");
+ ret = PTR_ERR(lcd->bd);
+ goto err_backlight_register;
+ }
+
+ lcd->bd->props.max_brightness = MAX_BRIGHTNESS;
+ lcd->bd->props.brightness = MAX_BRIGHTNESS;
+
+ s6e8ax0_read_id(lcd, mtp_id);
+ if (mtp_id[0] = 0x00)
+ dev_err(lcd->dev, "read id failed\n");
+
+ dev_info(lcd->dev, "Read ID : %x, %x, %x\n",
+ mtp_id[0], mtp_id[1], mtp_id[2]);
+
+ if (mtp_id[2] = 0x33)
+ dev_info(lcd->dev,
+ "ID-3 is 0xff does not support dynamic elvss\n");
+ else
+ dev_info(lcd->dev,
+ "ID-3 is 0x%x support dynamic elvss\n", mtp_id[2]);
+
+ lcd->acl_enable = 1;
+ lcd->cur_acl = 0;
+
+ dev_set_drvdata(&dsim_dev->dev, lcd);
+
+ dev_dbg(lcd->dev, "probed s6e8ax0 panel driver.\n");
+
+ return 0;
+
+err_backlight_register:
+ lcd_device_unregister(lcd->ld);
+
+err_lcd_register:
+ regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+ kfree(lcd);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ s6e8ax0_sleep_in(lcd);
+ msleep(lcd->ddi_pd->power_off_delay);
+ s6e8ax0_display_off(lcd);
+
+ s6e8ax0_regulator_disable(lcd);
+
+ return 0;
+}
+
+static int s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev)
+{
+ struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+ s6e8ax0_sleep_out(lcd);
+ msleep(lcd->ddi_pd->power_on_delay);
+
+ s6e8ax0_regulator_enable(lcd);
+ s6e8ax0_set_sequence(dsim_dev);
+
+ return 0;
+}
+#else
+#define s6e8ax0_suspend NULL
+#define s6e8ax0_resume NULL
+#endif
+
+static struct mipi_dsim_lcd_driver s6e8ax0_dsim_ddi_driver = {
+ .name = "s6e8ax0",
+ .id = -1,
+
+ .power_on = s6e8ax0_power_on,
+ .set_sequence = s6e8ax0_set_sequence,
+ .probe = s6e8ax0_probe,
+ .suspend = s6e8ax0_suspend,
+ .resume = s6e8ax0_resume,
+};
+
+static int s6e8ax0_init(void)
+{
+ s5p_mipi_dsi_register_lcd_driver(&s6e8ax0_dsim_ddi_driver);
+
+ return 0;
+}
+
+static void s6e8ax0_exit(void)
+{
+ return;
+}
+
+module_init(s6e8ax0_init);
+module_exit(s6e8ax0_exit);
+
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e8ax0 AMOLED LCD Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/s6e8ax0.h b/drivers/video/backlight/s6e8ax0.h
new file mode 100644
index 0000000..7a99845
--- /dev/null
+++ b/drivers/video/backlight/s6e8ax0.h
@@ -0,0 +1,26 @@
+/* linux/drivers/video/backlight/s6e8ax0.h
+ *
+ * MIPI-DSI based s6e8ax0 AMOLED LCD Panel definitions.
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S6E8AX0_H
+#define _S6E8AX0_H
+
+extern void s6e8ax0_init(void);
+extern void s6e8ax0_set_link(void *pd, unsigned int dsim_base,
+ unsigned char (*cmd_write) (unsigned int dsim_base, unsigned int data0,
+ unsigned int data1, unsigned int data2),
+ unsigned char (*cmd_read) (unsigned int dsim_base, unsigned int data0,
+ unsigned int data1, unsigned int data2));
+
+#endif
+
--
1.7.4.1
^ permalink raw reply related
* Re: [BUGFIX] video/mxsfb: fix crash when unblanking the display
From: Lothar Waßmann @ 2011-12-21 7:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1323174425-24038-1-git-send-email-LW@KARO-electronics.de>
Hi,
Lothar Waßmann writes:
> The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature.
> The write in mxsfb_disable_controller() sets the data_cnt for the LCD
> DMA to 0 which obviously means the max. count for the LCD DMA and
> leads to overwriting arbitrary memory when the display is unblanked.
>
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> ---
> drivers/video/mxsfb.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
> index d837d63..03cb95a 100644
> --- a/drivers/video/mxsfb.c
> +++ b/drivers/video/mxsfb.c
> @@ -366,7 +366,8 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
> loop--;
> }
>
> - writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR);
> + reg = readl(host->base + LCDC_VDCTRL4);
> + writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
>
> clk_disable(host->clk);
>
> --
> 1.5.6.5
>
Ping. Any comments on this?
Lothar Waßmann
--
___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
^ permalink raw reply
* [PATCH] video: da8xx-fb: reset LCDC only if functional clock changes with DVFS
From: Manjunathappa, Prakash @ 2011-12-21 7:39 UTC (permalink / raw)
To: linux-fbdev
LCDC functional clock may or may not be derived from CPU/MPU DPLL,
For example,
AM335x => Separate independent DPLL for LCDC
Davinci => Same DPLL as MPU
So, on platforms where LCDC functional clock is not derived from CPU/MPU
PLL it is not required to reset LCDC module, if CPU frequency does not
change with DVFS.
This patch adds check to do reset only if functional clock changes
between pre and post notifier callbacks with DVFS.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
---
drivers/video/da8xx-fb.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 29577bf..1334a68 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -161,6 +161,7 @@ struct da8xx_fb_par {
int vsync_timeout;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
+ unsigned int lcd_fck_rate;
#endif
void (*panel_power_ctrl)(int);
};
@@ -840,11 +841,12 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
struct da8xx_fb_par *par;
par = container_of(nb, struct da8xx_fb_par, freq_transition);
- if (val = CPUFREQ_PRECHANGE) {
- lcd_disable_raster();
- } else if (val = CPUFREQ_POSTCHANGE) {
- lcd_calc_clk_divider(par);
- lcd_enable_raster();
+ if (val = CPUFREQ_POSTCHANGE) {
+ if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) {
+ lcd_disable_raster();
+ lcd_calc_clk_divider(par);
+ lcd_enable_raster();
+ }
}
return 0;
@@ -1137,6 +1139,7 @@ static int __devinit fb_probe(struct platform_device *device)
par = da8xx_fb_info->par;
par->lcdc_clk = fb_clk;
+ par->lcd_fck_rate = clk_get_rate(fb_clk);
par->pxl_clk = lcdc_info->pxl_clk;
if (fb_pdata->panel_power_ctrl) {
par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
--
1.7.1
^ permalink raw reply related
* Re: [PATCH] video: da8xx-fb: reset LCDC only if functional clock
From: Madhvapathi Sriram @ 2011-12-21 10:59 UTC (permalink / raw)
To: linux-fbdev
In-Reply-To: <1324452460-10646-1-git-send-email-prakash.pm@ti.com>
Prakash,
On Wed, Dec 21, 2011 at 12:57 PM, Manjunathappa, Prakash
<prakash.pm@ti.com> wrote:
>
> LCDC functional clock may or may not be derived from CPU/MPU DPLL,
> For example,
> AM335x => Separate independent DPLL for LCDC
> Davinci => Same DPLL as MPU
>
> So, on platforms where LCDC functional clock is not derived from CPU/MPU
> PLL it is not required to reset LCDC module, if CPU frequency does not
> change with DVFS.
Is it not the case that the CPU frequency always changes during DVFS?
This sentence does not strike me straight.
Did you mean that if the frequency of the PLL (from which LCDC
derives) does not change with DVFS, then LCDC module is not required
to be reset?
>
> This patch adds check to do reset only if functional clock changes
> between pre and post notifier callbacks with DVFS.
>
> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
> ---
> drivers/video/da8xx-fb.c | 13 ++++++++-----
> 1 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> index 29577bf..1334a68 100644
> --- a/drivers/video/da8xx-fb.c
> +++ b/drivers/video/da8xx-fb.c
> @@ -161,6 +161,7 @@ struct da8xx_fb_par {
> int vsync_timeout;
> #ifdef CONFIG_CPU_FREQ
> struct notifier_block freq_transition;
> + unsigned int lcd_fck_rate;
> #endif
> void (*panel_power_ctrl)(int);
> };
> @@ -840,11 +841,12 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
> struct da8xx_fb_par *par;
>
> par = container_of(nb, struct da8xx_fb_par, freq_transition);
> - if (val = CPUFREQ_PRECHANGE) {
> - lcd_disable_raster();
> - } else if (val = CPUFREQ_POSTCHANGE) {
> - lcd_calc_clk_divider(par);
> - lcd_enable_raster();
> + if (val = CPUFREQ_POSTCHANGE) {
> + if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) {
> + lcd_disable_raster();
> + lcd_calc_clk_divider(par);
> + lcd_enable_raster();
> + }
> }
>
> return 0;
> @@ -1137,6 +1139,7 @@ static int __devinit fb_probe(struct platform_device *device)
>
> par = da8xx_fb_info->par;
> par->lcdc_clk = fb_clk;
> + par->lcd_fck_rate = clk_get_rate(fb_clk);
> par->pxl_clk = lcdc_info->pxl_clk;
> if (fb_pdata->panel_power_ctrl) {
> par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
> --
> 1.7.1
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> Davinci-linux-open-source@linux.davincidsp.com
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
^ permalink raw reply
* RE: [PATCH] video: da8xx-fb: reset LCDC only if functional clock
From: Manjunathappa, Prakash @ 2011-12-21 11:11 UTC (permalink / raw)
To: linux-fbdev
In-Reply-To: <1324452460-10646-1-git-send-email-prakash.pm@ti.com>
Hi Sriram,
On Wed, Dec 21, 2011 at 16:17:01, Madhvapathi Sriram wrote:
> Prakash,
>
> On Wed, Dec 21, 2011 at 12:57 PM, Manjunathappa, Prakash
> <prakash.pm@ti.com> wrote:
> >
> > LCDC functional clock may or may not be derived from CPU/MPU DPLL,
> > For example,
> > AM335x => Separate independent DPLL for LCDC
> > Davinci => Same DPLL as MPU
> >
> > So, on platforms where LCDC functional clock is not derived from CPU/MPU
> > PLL it is not required to reset LCDC module, if CPU frequency does not
> > change with DVFS.
> Is it not the case that the CPU frequency always changes during DVFS?
> This sentence does not strike me straight.
> Did you mean that if the frequency of the PLL (from which LCDC
> derives) does not change with DVFS, then LCDC module is not required
> to be reset?
Ok I will re-phrase it as below:
So, on platforms where LCDC functional clock is not derived from CPU/MPU
PLL it is not required to reset LCDC module as its functional clock does not change with DVFS.
> >
> > This patch adds check to do reset only if functional clock changes
> > between pre and post notifier callbacks with DVFS.
> >
> > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
> > ---
> > drivers/video/da8xx-fb.c | 13 ++++++++-----
> > 1 files changed, 8 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
> > index 29577bf..1334a68 100644
> > --- a/drivers/video/da8xx-fb.c
> > +++ b/drivers/video/da8xx-fb.c
> > @@ -161,6 +161,7 @@ struct da8xx_fb_par {
> > int vsync_timeout;
> > #ifdef CONFIG_CPU_FREQ
> > struct notifier_block freq_transition;
> > + unsigned int lcd_fck_rate;
> > #endif
> > void (*panel_power_ctrl)(int);
> > };
> > @@ -840,11 +841,12 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
> > struct da8xx_fb_par *par;
> >
> > par = container_of(nb, struct da8xx_fb_par, freq_transition);
> > - if (val = CPUFREQ_PRECHANGE) {
> > - lcd_disable_raster();
> > - } else if (val = CPUFREQ_POSTCHANGE) {
> > - lcd_calc_clk_divider(par);
> > - lcd_enable_raster();
> > + if (val = CPUFREQ_POSTCHANGE) {
> > + if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) {
> > + lcd_disable_raster();
> > + lcd_calc_clk_divider(par);
> > + lcd_enable_raster();
> > + }
> > }
> >
> > return 0;
> > @@ -1137,6 +1139,7 @@ static int __devinit fb_probe(struct platform_device *device)
> >
> > par = da8xx_fb_info->par;
> > par->lcdc_clk = fb_clk;
> > + par->lcd_fck_rate = clk_get_rate(fb_clk);
> > par->pxl_clk = lcdc_info->pxl_clk;
> > if (fb_pdata->panel_power_ctrl) {
> > par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
> > --
> > 1.7.1
> >
> > _______________________________________________
> > Davinci-linux-open-source mailing list
> > Davinci-linux-open-source@linux.davincidsp.com
> > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
^ permalink raw reply
* Re: [PATCH] MAINTAINERS: add a maintainer for Samsung Framebuffer
From: Florian Tobias Schandinat @ 2011-12-21 21:42 UTC (permalink / raw)
To: linux-fbdev
In-Reply-To: <003c01ccbdf3$41843df0$c48cb9d0$%han@samsung.com>
On 12/19/2011 02:09 AM, Jingoo Han wrote:
> Add a maintainer for Samsung Framebuffer driver.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> Cc: Ben Dooks <ben-linux@fluff.org>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> MAINTAINERS | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 855afd4..a03e288 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5667,6 +5667,12 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
> S: Supported
> F: sound/soc/samsung
>
> +SAMSUNG FRAMEBUFFER DRIVER
> +M: Jingoo Han <jg1.han@samsung.com>
> +L: linux-fbdev@vger.kernel.org
> +S: Maintained
> +F: drivers/video/s3c-fb.c
> +
> SERIAL DRIVERS
> M: Alan Cox <alan@linux.intel.com>
> L: linux-serial@vger.kernel.org
^ permalink raw reply
* Re: [PATCH RESEND] MXSFB: Fix driver registration
From: Florian Tobias Schandinat @ 2011-12-21 21:42 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-kernel, linux-fbdev, Wolfgang Denk, Stefano Babic,
Shawn Guo, Huang Shijie, Axel Lin, Sascha Hauer
In-Reply-To: <1324309079-10739-1-git-send-email-marek.vasut@gmail.com>
On 12/19/2011 03:37 PM, Marek Vasut wrote:
> The driver should be registered with mxsfb_driver, not with mxsfb_devtype.
> This caused obvious null pointer dereference and crash.
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
> Cc: Huang Shijie <b32955@freescale.com>
> Cc: Axel Lin <axel.lin@gmail.com>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Acked-by: Axel Lin <axel.lin@gmail.com>
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> drivers/video/mxsfb.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
> index 18742c2..d29c7c0 100644
> --- a/drivers/video/mxsfb.c
> +++ b/drivers/video/mxsfb.c
> @@ -902,7 +902,7 @@ static struct platform_driver mxsfb_driver = {
> },
> };
>
> -module_platform_driver(mxsfb_devtype);
> +module_platform_driver(mxsfb_driver);
>
> MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
> MODULE_AUTHOR("Sascha Hauer, Pengutronix");
^ permalink raw reply
* Re: [PATCH] s3fb: fix Virge/VX
From: Florian Tobias Schandinat @ 2011-12-21 21:44 UTC (permalink / raw)
To: Ondrej Zary
Cc: Paul Mundt, Ondrej Zajicek, linux-fbdev, Kernel development list
In-Reply-To: <201112192339.52676.linux@rainbow-software.org>
On 12/19/2011 10:39 PM, Ondrej Zary wrote:
> Add memory size detection for Virge/VX and small delay in mode setting (same
> as in X.org driver) to fix blank screen problem.
>
> Also adjust DTPC position to fix garbled screen in some modes (tested that
> this adjustment does not break other cards - at least Trio32, Trio64V+,
> Trio64V2/DX, Virge, Virge/DX).
>
> Tested on ELSA Winner 2000AVI/3D.
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Applied.
Thanks,
Florian Tobias Schandinat
>
> --- linux-3.1-orig/drivers/video/s3fb.c 2011-10-24 09:10:05.000000000 +0200
> +++ linux-3.1/drivers/video/s3fb.c 2011-12-19 23:28:34.000000000 +0100
> @@ -727,7 +727,7 @@
> if (par->chip = CHIP_988_VIRGE_VX) {
> vga_wcrt(par->state.vgabase, 0x50, 0x00);
> vga_wcrt(par->state.vgabase, 0x67, 0x50);
> -
> + msleep(10); /* screen remains blank sometimes without this */
> vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
> vga_wcrt(par->state.vgabase, 0x66, 0x90);
> }
> @@ -901,7 +901,8 @@
>
> /* Set Data Transfer Position */
> hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
> - value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1);
> + /* + 2 is needed for Virge/VX, does no harm on other cards */
> + value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1);
> svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
>
> memset_io(info->screen_base, 0x00, screen_size);
> @@ -1215,6 +1216,31 @@
> info->screen_size = 2 << 20;
> break;
> }
> + } else if (par->chip = CHIP_988_VIRGE_VX) {
> + switch ((regval & 0x60) >> 5) {
> + case 0: /* 2MB */
> + info->screen_size = 2 << 20;
> + break;
> + case 1: /* 4MB */
> + info->screen_size = 4 << 20;
> + break;
> + case 2: /* 6MB */
> + info->screen_size = 6 << 20;
> + break;
> + case 3: /* 8MB */
> + info->screen_size = 8 << 20;
> + break;
> + }
> + /* off-screen memory */
> + regval = vga_rcrt(par->state.vgabase, 0x37);
> + switch ((regval & 0x60) >> 5) {
> + case 1: /* 4MB */
> + info->screen_size -= 4 << 20;
> + break;
> + case 2: /* 2MB */
> + info->screen_size -= 2 << 20;
> + break;
> + }
> } else
> info->screen_size = s3_memsizes[regval >> 5] << 10;
> info->fix.smem_len = info->screen_size;
>
>
^ permalink raw reply
* Re: [PATCH] fbdev: matroxfb: Fix compilation after fb_var_screeninfo
From: Florian Tobias Schandinat @ 2011-12-21 21:44 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Geert Uytterhoeven, Stephen Rothwell, linux-fbdev, linux-next,
linux-kernel
In-Reply-To: <1324407611-6886-1-git-send-email-laurent.pinchart@ideasonboard.com>
On 12/20/2011 07:00 PM, Laurent Pinchart wrote:
> Commit fb21c2f42879 ("fbdev: Add FOURCC-based format configuration API")
> modified the layout of the fb_var_screeninfo structure. Remove zero
> fields from the static initializers in the matroxfb driver accordingly.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> drivers/video/matrox/matroxfb_base.c | 1 -
> drivers/video/matrox/matroxfb_crtc2.c | 1 -
> 2 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
> index 44bf8d4..401a56e 100644
> --- a/drivers/video/matrox/matroxfb_base.c
> +++ b/drivers/video/matrox/matroxfb_base.c
> @@ -147,7 +147,6 @@ static struct fb_var_screeninfo vesafb_defined = {
> 39721L,48L,16L,33L,10L,
> 96L,2L,~0, /* No sync info */
> FB_VMODE_NONINTERLACED,
> - 0, {0,0,0,0,0}
> };
>
>
> diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/matrox/matroxfb_crtc2.c
> index d7112c3..02796a4 100644
> --- a/drivers/video/matrox/matroxfb_crtc2.c
> +++ b/drivers/video/matrox/matroxfb_crtc2.c
> @@ -593,7 +593,6 @@ static struct fb_var_screeninfo matroxfb_dh_defined = {
> 39721L,48L,16L,33L,10L,
> 96L,2,0, /* no sync info */
> FB_VMODE_NONINTERLACED,
> - 0, {0,0,0,0,0}
> };
>
> static int matroxfb_dh_regit(const struct matrox_fb_info *minfo,
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox