* Re: [PATCH] fbdev: sh_mipi_dsi: add extra settings method for platform
From: Laurent Pinchart @ 2012-01-23 10:36 UTC (permalink / raw)
To: linux-fbdev
In-Reply-To: <874nvnhupd.wl%kuninori.morimoto.gx@renesas.com>
Hello Morimoto-san,
Thank you for the patch.
On Monday 23 January 2012 06:08:34 Kuninori Morimoto wrote:
> Some platform needs extra MIPI settings.
> This patch add support it.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> drivers/video/sh_mipi_dsi.c | 8 ++++++++
> include/video/sh_mipi_dsi.h | 3 +++
> 2 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
> index 05151b8..1532894 100644
> --- a/drivers/video/sh_mipi_dsi.c
> +++ b/drivers/video/sh_mipi_dsi.c
> @@ -386,6 +386,14 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
> pixfmt << 4);
> sh_mipi_dcs(ch->chan, MIPI_DCS_SET_DISPLAY_ON);
>
> + /*
> + * extra dcs settings for platform
> + */
> + if (pdata->set_dcs)
> + pdata->set_dcs(ch->chan,
> + sh_mipi_dcs,
> + sh_mipi_dcs_param);
> +
> /* Enable timeout counters */
> iowrite32(0x00000f00, base + DSICTRL);
>
> diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h
> index 434d56b..6e1f7bc 100644
> --- a/include/video/sh_mipi_dsi.h
> +++ b/include/video/sh_mipi_dsi.h
> @@ -52,6 +52,9 @@ struct sh_mipi_dsi_info {
> unsigned long flags;
> u32 clksrc;
> unsigned int vsynw_offset;
> + void (*set_dcs)(int handle,
> + int (*mipi_dcs)(int handle, u8 cmd),
> + int (*mipi_dcs_param)(int handle, u8 cmd, u8 param));
I don't think this is a good idea. First of all, we should reduce the number
of board code callbacks to make transition to the device tree easier. Then,
passing two functions to board code to read and write any device register
without the driver having any knowledge about that is a clear violation of the
device model, and will result in problems sooner or later.
What MIPI settings do platforms need to modify ? Can those settings be
expressed as data in the sh_mipi_dsi_info structure instead ?
> int (*set_dot_clock)(struct platform_device *pdev,
> void __iomem *base,
> int enable);
--
Regards,
Laurent Pinchart
^ permalink raw reply
* [PATCH 0/3] OMAP: DSS PM fixes
From: Tomi Valkeinen @ 2012-01-23 12:15 UTC (permalink / raw)
To: linux-omap, linux-fbdev, paul
Cc: archit, neilb, jean.pihet, khilman, jw, Tomi Valkeinen
Here are two fixes to get DSS work better with PM on OMAP3.
The first two patches fix the missing SYSC_HAS_ENAWAKEUP flag, which removes
the SYNC_LOST problem.
The third patch changes omapdss to use pm_runtime_put_sync functions, which
fixes the system suspend.
I've tested both only on v3.3-rc1, OMAP3 Overo. I get problems on system
suspend from TWL and MTD drivers (also without my patches =), but disabling MTD
and ignoring TWL errors shows that the warning from omapdss has disappeared,
and I get an image on the screen on resume.
The two fixes are independent, so either I can take them through dss tree (with
appropriate Acks), or the hwmod patches can go through some other tree.
The fixes should also work directly on v3.2, even though I haven't tested them
yet.
Tomi
Tomi Valkeinen (3):
ARM: OMAP: HWMOD: split omap2/3 dispc hwmod class
ARM: OMAP3: HWMOD: add SYSC_HAS_ENAWAKEUP for dispc
OMAPDSS: use sync versions of pm_runtime_put
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 21 -----------------
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 22 ++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 24 +++++++++++++++++++-
drivers/video/omap2/dss/dispc.c | 2 +-
drivers/video/omap2/dss/dsi.c | 2 +-
drivers/video/omap2/dss/dss.c | 2 +-
drivers/video/omap2/dss/hdmi.c | 2 +-
drivers/video/omap2/dss/rfbi.c | 2 +-
drivers/video/omap2/dss/venc.c | 2 +-
9 files changed, 51 insertions(+), 28 deletions(-)
--
1.7.4.1
^ permalink raw reply
* [PATCH 1/3] ARM: OMAP: HWMOD: split omap2/3 dispc hwmod class
From: Tomi Valkeinen @ 2012-01-23 12:15 UTC (permalink / raw)
To: linux-omap, linux-fbdev, paul
Cc: archit, neilb, jean.pihet, khilman, jw, Tomi Valkeinen
In-Reply-To: <1327320930-14550-1-git-send-email-tomi.valkeinen@ti.com>
Currently OMAP2 and 3 share the same omap_hwmod_class and
omap_hwmod_class_sysconfig for dispc. However, OMAP3 has sysconfig
bits that OMAP2 doesn't have, so we need to split those structs into
OMAP2 and OMAP3 specific versions.
This patch only splits the structs, without changing the contents.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 21 ------------------
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 22 +++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 23 +++++++++++++++++++-
3 files changed, 44 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c11273d..f08e442 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = {
};
/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
- .name = "dispc",
- .sysc = &omap2_dispc_sysc,
-};
-
-/*
* 'rfbi' class
* remote frame buffer interface
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 177dee2..2a67297 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1 }
};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap2_dispc_sysc,
+};
+
/* OMAP2xxx Timer Common */
static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
.rev_offs = 0x0000,
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5324e8d..c965309 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1480,6 +1480,27 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
};
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap3_dispc_sysc,
+};
+
/* l4_core -> dss_dispc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
@@ -1503,7 +1524,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
+ .class = &omap3_dispc_hwmod_class,
.mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
--
1.7.4.1
^ permalink raw reply related
* [PATCH 2/3] ARM: OMAP3: HWMOD: add SYSC_HAS_ENAWAKEUP for dispc
From: Tomi Valkeinen @ 2012-01-23 12:15 UTC (permalink / raw)
To: linux-omap, linux-fbdev, paul
Cc: archit, neilb, jean.pihet, khilman, jw, Tomi Valkeinen
In-Reply-To: <1327320930-14550-1-git-send-email-tomi.valkeinen@ti.com>
dispc's sysc_flags is missing SYSC_HAS_ENAWAKEUP flag. This seems to
cause SYNC_LOST errors from the DSS when the power management is
enabled.
This patch adds the missing SYSC_HAS_ENAWAKEUP flag. Note that there are
other flags missing also (clock activity, DSI's sysc flags), but as they
are not critical, they will be fixed in the next merge window.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c965309..b176d44 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1490,7 +1490,8 @@ static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSC_HAS_ENAWAKEUP),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
--
1.7.4.1
^ permalink raw reply related
* [PATCH 3/3] OMAPDSS: use sync versions of pm_runtime_put
From: Tomi Valkeinen @ 2012-01-23 12:15 UTC (permalink / raw)
To: linux-omap, linux-fbdev, paul
Cc: archit, neilb, jean.pihet, khilman, jw, Tomi Valkeinen
In-Reply-To: <1327320930-14550-1-git-send-email-tomi.valkeinen@ti.com>
omapdss doesn't work properly on system suspend. The problem seems to be
the fact that omapdss uses pm_runtime_put() functions when turning off
the hardware, and when system suspend is in process only sync versions
are allowed.
Using non-sync versions normally and sync versions when suspending would
need rather ugly hacks to convey the information of
suspending/not-suspending to different functions. Optimally the driver
wouldn't even need to care about this, and the PM layer would handle
syncing when suspend is in process.
This patch changes all omapdss's pm_runtime_put calls to
pm_runtime_put_sync. This fixes the suspend problem, and probably the
performance penalty of always using sync versions is negligible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 2 +-
drivers/video/omap2/dss/dsi.c | 2 +-
drivers/video/omap2/dss/dss.c | 2 +-
drivers/video/omap2/dss/hdmi.c | 2 +-
drivers/video/omap2/dss/rfbi.c | 2 +-
drivers/video/omap2/dss/venc.c | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a5ec7f3..e1626a1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -401,7 +401,7 @@ void dispc_runtime_put(void)
DSSDBG("dispc_runtime_put\n");
- r = pm_runtime_put(&dispc.pdev->dev);
+ r = pm_runtime_put_sync(&dispc.pdev->dev);
WARN_ON(r < 0);
}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d4d676c..52f36ec 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1079,7 +1079,7 @@ void dsi_runtime_put(struct platform_device *dsidev)
DSSDBG("dsi_runtime_put\n");
- r = pm_runtime_put(&dsi->pdev->dev);
+ r = pm_runtime_put_sync(&dsi->pdev->dev);
WARN_ON(r < 0);
}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 1703345..77c2b5a 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -720,7 +720,7 @@ void dss_runtime_put(void)
DSSDBG("dss_runtime_put\n");
- r = pm_runtime_put(&dss.pdev->dev);
+ r = pm_runtime_put_sync(&dss.pdev->dev);
WARN_ON(r < 0);
}
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index b4c270e..c39f9c3 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -176,7 +176,7 @@ static void hdmi_runtime_put(void)
DSSDBG("hdmi_runtime_put\n");
- r = pm_runtime_put(&hdmi.pdev->dev);
+ r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
}
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 814bb95..55f3980 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -140,7 +140,7 @@ static void rfbi_runtime_put(void)
DSSDBG("rfbi_runtime_put\n");
- r = pm_runtime_put(&rfbi.pdev->dev);
+ r = pm_runtime_put_sync(&rfbi.pdev->dev);
WARN_ON(r < 0);
}
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index b3e9f90..5c3d0f9 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -401,7 +401,7 @@ static void venc_runtime_put(void)
DSSDBG("venc_runtime_put\n");
- r = pm_runtime_put(&venc.pdev->dev);
+ r = pm_runtime_put_sync(&venc.pdev->dev);
WARN_ON(r < 0);
}
--
1.7.4.1
^ permalink raw reply related
* Re: [PATCH 3/3] OMAPDSS: use sync versions of pm_runtime_put
From: Kevin Hilman @ 2012-01-23 22:33 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, linux-fbdev, paul, archit, neilb, jean.pihet, jw
In-Reply-To: <1327320930-14550-4-git-send-email-tomi.valkeinen@ti.com>
Tomi Valkeinen <tomi.valkeinen@ti.com> writes:
> omapdss doesn't work properly on system suspend. The problem seems to be
> the fact that omapdss uses pm_runtime_put() functions when turning off
> the hardware, and when system suspend is in process only sync versions
> are allowed.
>
> Using non-sync versions normally and sync versions when suspending would
> need rather ugly hacks to convey the information of
> suspending/not-suspending to different functions. Optimally the driver
> wouldn't even need to care about this, and the PM layer would handle
> syncing when suspend is in process.
>
> This patch changes all omapdss's pm_runtime_put calls to
> pm_runtime_put_sync. This fixes the suspend problem, and probably the
> performance penalty of always using sync versions is negligible.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
^ permalink raw reply
* [PATCH v5] Resurrect Intel740 driver: i740fb
From: Ondrej Zary @ 2012-01-23 23:17 UTC (permalink / raw)
To: linux-fbdev
Cc: Andrey Ulanov, Florian Tobias Schandinat, Paul Mundt,
Kernel development list
This is a resurrection of an old (like 2.4.19) out-of-tree driver for
Intel740 graphics cards and adaptation for recent kernels. The old driver by
Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/
This is a new driver based on skeletonfb, using most of the low level HW code
from the old driver. The DDC code is completely new.
The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II
G460.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
Changes in v5:
- fixed checkpatch problems
- added Kconfig dependency on FB_DDC
- cleaned up i740_calc_vclk()
- fixed SDRAM/SGRAM detection
- fixed wrong colors in 16bpp mode when neither 555 nor 565 specified
--- linux-3.2.1-orig/drivers/video/Kconfig 2012-01-12 20:42:45.000000000 +0100
+++ linux-3.2.1/drivers/video/Kconfig 2012-01-23 20:52:32.000000000 +0100
@@ -1123,6 +1123,18 @@ config FB_RIVA_BACKLIGHT
help
Say Y here if you want to control the backlight of your display.
+config FB_I740
+ tristate "Intel740 support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && FB && PCI
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FB_DDC
+ help
+ This driver supports graphics cards based on Intel740 chip.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
--- linux-3.2.1-orig/drivers/video/Makefile 2012-01-12 20:42:45.000000000 +0100
+++ linux-3.2.1/drivers/video/Makefile 2012-01-23 20:52:32.000000000 +0100
@@ -37,6 +37,7 @@ obj-$(CONFIG_FB_GRVGA) += grv
obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
+obj-$(CONFIG_FB_I740) += i740fb.o
obj-$(CONFIG_FB_MATROX) += matrox/
obj-$(CONFIG_FB_RIVA) += riva/
obj-$(CONFIG_FB_NVIDIA) += nvidia/
--- /dev/null 2012-01-24 00:06:39.330222901 +0100
+++ linux-3.2.1/drivers/video/i740fb.c 2012-01-24 00:01:54.000000000 +0100
@@ -0,0 +1,1337 @@
+/*
+ * i740fb - framebuffer driver for Intel740
+ * Copyright (c) 2011 Ondrej Zary
+ *
+ * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru>
+ * which was partially based on:
+ * VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org>
+ * and Petr Vandrovec <VANDROVE@vc.cvut.cz>
+ * i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park,
+ * Texas.
+ * i740fb by Patrick LERDA, v0.9
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/console.h>
+#include <video/vga.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "i740_reg.h"
+
+static char *mode_option __devinitdata;
+
+#ifdef CONFIG_MTRR
+static int mtrr __devinitdata = 1;
+#endif
+
+struct i740fb_par {
+ unsigned char __iomem *regs;
+ bool has_sgram;
+#ifdef CONFIG_MTRR
+ int mtrr_reg;
+#endif
+ bool ddc_registered;
+ struct i2c_adapter ddc_adapter;
+ struct i2c_algo_bit_data ddc_algo;
+ u32 pseudo_palette[16];
+ struct mutex open_lock;
+ unsigned int ref_count;
+
+ u8 crtc[VGA_CRT_C];
+ u8 atc[VGA_ATT_C];
+ u8 gdc[VGA_GFX_C];
+ u8 seq[VGA_SEQ_C];
+ u8 misc;
+ u8 vss;
+
+ /* i740 specific registers */
+ u8 display_cntl;
+ u8 pixelpipe_cfg0;
+ u8 pixelpipe_cfg1;
+ u8 pixelpipe_cfg2;
+ u8 video_clk2_m;
+ u8 video_clk2_n;
+ u8 video_clk2_mn_msbs;
+ u8 video_clk2_div_sel;
+ u8 pll_cntl;
+ u8 address_mapping;
+ u8 io_cntl;
+ u8 bitblt_cntl;
+ u8 ext_vert_total;
+ u8 ext_vert_disp_end;
+ u8 ext_vert_sync_start;
+ u8 ext_vert_blank_start;
+ u8 ext_horiz_total;
+ u8 ext_horiz_blank;
+ u8 ext_offset;
+ u8 interlace_cntl;
+ u32 lmi_fifo_watermark;
+ u8 ext_start_addr;
+ u8 ext_start_addr_hi;
+};
+
+#define DACSPEED8 203
+#define DACSPEED16 163
+#define DACSPEED24_SG 136
+#define DACSPEED24_SD 128
+#define DACSPEED32 86
+
+static struct fb_fix_screeninfo i740fb_fix __devinitdata = {
+ .id = "i740fb",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 8,
+ .ypanstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
+
+static inline void i740outb(struct i740fb_par *par, u16 port, u8 val)
+{
+ vga_mm_w(par->regs, port, val);
+}
+static inline u8 i740inb(struct i740fb_par *par, u16 port)
+{
+ return vga_mm_r(par->regs, port);
+}
+static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val)
+{
+ vga_mm_w_fast(par->regs, port, reg, val);
+}
+static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg)
+{
+ vga_mm_w(par->regs, port, reg);
+ return vga_mm_r(par->regs, port+1);
+}
+static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg,
+ u8 val, u8 mask)
+{
+ vga_mm_w_fast(par->regs, port, reg, (val & mask)
+ | (i740inreg(par, port, reg) & ~mask));
+}
+
+#define REG_DDC_DRIVE 0x62
+#define REG_DDC_STATE 0x63
+#define DDC_SCL (1 << 3)
+#define DDC_SDA (1 << 2)
+
+static void i740fb_ddc_setscl(void *data, int val)
+{
+ struct i740fb_par *par = data;
+
+ i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL);
+ i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL);
+}
+
+static void i740fb_ddc_setsda(void *data, int val)
+{
+ struct i740fb_par *par = data;
+
+ i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA);
+ i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA);
+}
+
+static int i740fb_ddc_getscl(void *data)
+{
+ struct i740fb_par *par = data;
+
+ i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL);
+
+ return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL);
+}
+
+static int i740fb_ddc_getsda(void *data)
+{
+ struct i740fb_par *par = data;
+
+ i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA);
+
+ return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA);
+}
+
+static int __devinit i740fb_setup_ddc_bus(struct fb_info *info)
+{
+ struct i740fb_par *par = info->par;
+
+ strlcpy(par->ddc_adapter.name, info->fix.id,
+ sizeof(par->ddc_adapter.name));
+ par->ddc_adapter.owner = THIS_MODULE;
+ par->ddc_adapter.class = I2C_CLASS_DDC;
+ par->ddc_adapter.algo_data = &par->ddc_algo;
+ par->ddc_adapter.dev.parent = info->device;
+ par->ddc_algo.setsda = i740fb_ddc_setsda;
+ par->ddc_algo.setscl = i740fb_ddc_setscl;
+ par->ddc_algo.getsda = i740fb_ddc_getsda;
+ par->ddc_algo.getscl = i740fb_ddc_getscl;
+ par->ddc_algo.udelay = 10;
+ par->ddc_algo.timeout = 20;
+ par->ddc_algo.data = par;
+
+ i2c_set_adapdata(&par->ddc_adapter, par);
+
+ return i2c_bit_add_bus(&par->ddc_adapter);
+}
+
+static int i740fb_open(struct fb_info *info, int user)
+{
+ struct i740fb_par *par = info->par;
+
+ mutex_lock(&(par->open_lock));
+ par->ref_count++;
+ mutex_unlock(&(par->open_lock));
+
+ return 0;
+}
+
+static int i740fb_release(struct fb_info *info, int user)
+{
+ struct i740fb_par *par = info->par;
+
+ mutex_lock(&(par->open_lock));
+ if (par->ref_count = 0) {
+ printk(KERN_ERR "fb%d: release called with zero refcount\n",
+ info->node);
+ mutex_unlock(&(par->open_lock));
+ return -EINVAL;
+ }
+
+ par->ref_count--;
+ mutex_unlock(&(par->open_lock));
+
+ return 0;
+}
+
+static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp)
+{
+ /*
+ * Would like to calculate these values automatically, but a generic
+ * algorithm does not seem possible. Note: These FIFO water mark
+ * values were tested on several cards and seem to eliminate the
+ * all of the snow and vertical banding, but fine adjustments will
+ * probably be required for other cards.
+ */
+
+ u32 wm;
+
+ switch (bpp) {
+ case 8:
+ if (freq > 200)
+ wm = 0x18120000;
+ else if (freq > 175)
+ wm = 0x16110000;
+ else if (freq > 135)
+ wm = 0x120E0000;
+ else
+ wm = 0x100D0000;
+ break;
+ case 15:
+ case 16:
+ if (par->has_sgram) {
+ if (freq > 140)
+ wm = 0x2C1D0000;
+ else if (freq > 120)
+ wm = 0x2C180000;
+ else if (freq > 100)
+ wm = 0x24160000;
+ else if (freq > 90)
+ wm = 0x18120000;
+ else if (freq > 50)
+ wm = 0x16110000;
+ else if (freq > 32)
+ wm = 0x13100000;
+ else
+ wm = 0x120E0000;
+ } else {
+ if (freq > 160)
+ wm = 0x28200000;
+ else if (freq > 140)
+ wm = 0x2A1E0000;
+ else if (freq > 130)
+ wm = 0x2B1A0000;
+ else if (freq > 120)
+ wm = 0x2C180000;
+ else if (freq > 100)
+ wm = 0x24180000;
+ else if (freq > 90)
+ wm = 0x18120000;
+ else if (freq > 50)
+ wm = 0x16110000;
+ else if (freq > 32)
+ wm = 0x13100000;
+ else
+ wm = 0x120E0000;
+ }
+ break;
+ case 24:
+ if (par->has_sgram) {
+ if (freq > 130)
+ wm = 0x31200000;
+ else if (freq > 120)
+ wm = 0x2E200000;
+ else if (freq > 100)
+ wm = 0x2C1D0000;
+ else if (freq > 80)
+ wm = 0x25180000;
+ else if (freq > 64)
+ wm = 0x24160000;
+ else if (freq > 49)
+ wm = 0x18120000;
+ else if (freq > 32)
+ wm = 0x16110000;
+ else
+ wm = 0x13100000;
+ } else {
+ if (freq > 120)
+ wm = 0x311F0000;
+ else if (freq > 100)
+ wm = 0x2C1D0000;
+ else if (freq > 80)
+ wm = 0x25180000;
+ else if (freq > 64)
+ wm = 0x24160000;
+ else if (freq > 49)
+ wm = 0x18120000;
+ else if (freq > 32)
+ wm = 0x16110000;
+ else
+ wm = 0x13100000;
+ }
+ break;
+ case 32:
+ if (par->has_sgram) {
+ if (freq > 80)
+ wm = 0x2A200000;
+ else if (freq > 60)
+ wm = 0x281A0000;
+ else if (freq > 49)
+ wm = 0x25180000;
+ else if (freq > 32)
+ wm = 0x18120000;
+ else
+ wm = 0x16110000;
+ } else {
+ if (freq > 80)
+ wm = 0x29200000;
+ else if (freq > 60)
+ wm = 0x281A0000;
+ else if (freq > 49)
+ wm = 0x25180000;
+ else if (freq > 32)
+ wm = 0x18120000;
+ else
+ wm = 0x16110000;
+ }
+ break;
+ }
+
+ return wm;
+}
+
+/* clock calculation from i740fb by Patrick LERDA */
+
+#define I740_RFREQ 1000000
+#define TARGET_MAX_N 30
+#define I740_FFIX (1 << 8)
+#define I740_RFREQ_FIX (I740_RFREQ / I740_FFIX)
+#define I740_REF_FREQ (6667 * I740_FFIX / 100) /* 66.67 MHz */
+#define I740_MAX_VCO_FREQ (450 * I740_FFIX) /* 450 MHz */
+
+static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
+{
+ const u32 err_max = freq / (200 * I740_RFREQ / I740_FFIX);
+ const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX);
+ u32 err_best = 512 * I740_FFIX;
+ u32 f_err, f_vco;
+ int m_best = 0, n_best = 0, p_best = 0, d_best = 0;
+ int m, n;
+
+ p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
+ d_best = 0;
+ f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX;
+ freq = freq / I740_RFREQ_FIX;
+
+ n = 2;
+ do {
+ n++;
+ m = ((f_vco * n) / I740_REF_FREQ + 2) / 4;
+
+ if (m < 3)
+ m = 3;
+
+ {
+ u32 f_out = (((m * I740_REF_FREQ * (4 << 2 * d_best))
+ / n) + ((1 << p_best) / 2)) / (1 << p_best);
+
+ f_err = (freq - f_out);
+
+ if (abs(f_err) < err_max) {
+ m_best = m;
+ n_best = n;
+ err_best = f_err;
+ }
+ }
+ } while ((abs(f_err) >= err_target) &&
+ ((n <= TARGET_MAX_N) || (abs(err_best) > err_max)));
+
+ if (abs(f_err) < err_target) {
+ m_best = m;
+ n_best = n;
+ }
+
+ par->video_clk2_m = (m_best - 2) & 0xFF;
+ par->video_clk2_n = (n_best - 2) & 0xFF;
+ par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS)
+ | (((m_best - 2) >> 8) & VCO_M_MSBS));
+ par->video_clk2_div_sel + ((p_best << 4) | (d_best ? 4 : 0) | REF_DIV_1);
+}
+
+static int i740fb_decode_var(const struct fb_var_screeninfo *var,
+ struct i740fb_par *par, struct fb_info *info)
+{
+ /*
+ * Get the video params out of 'var'.
+ * If a value doesn't fit, round it up, if it's too big, return -EINVAL.
+ */
+
+ u32 xres, right, hslen, left, xtotal;
+ u32 yres, lower, vslen, upper, ytotal;
+ u32 vxres, xoffset, vyres, yoffset;
+ u32 bpp, base, dacspeed24, mem;
+ u8 r7;
+ int i;
+
+ dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n",
+ var->xres, var->yres, var->xres_virtual, var->xres_virtual);
+ dev_dbg(info->device, " xoff: %i, yoff: %i, bpp: %i, graysc: %i\n",
+ var->xoffset, var->yoffset, var->bits_per_pixel,
+ var->grayscale);
+ dev_dbg(info->device, " activate: %i, nonstd: %i, vmode: %i\n",
+ var->activate, var->nonstd, var->vmode);
+ dev_dbg(info->device, " pixclock: %i, hsynclen:%i, vsynclen:%i\n",
+ var->pixclock, var->hsync_len, var->vsync_len);
+ dev_dbg(info->device, " left: %i, right: %i, up:%i, lower:%i\n",
+ var->left_margin, var->right_margin, var->upper_margin,
+ var->lower_margin);
+
+
+ bpp = var->bits_per_pixel;
+ switch (bpp) {
+ case 1 ... 8:
+ bpp = 8;
+ if ((1000000 / var->pixclock) > DACSPEED8) {
+ dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n",
+ 1000000 / var->pixclock, DACSPEED8);
+ return -EINVAL;
+ }
+ break;
+ case 9 ... 15:
+ bpp = 15;
+ case 16:
+ if ((1000000 / var->pixclock) > DACSPEED16) {
+ dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n",
+ 1000000 / var->pixclock, DACSPEED16);
+ return -EINVAL;
+ }
+ break;
+ case 17 ... 24:
+ bpp = 24;
+ dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD;
+ if ((1000000 / var->pixclock) > dacspeed24) {
+ dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n",
+ 1000000 / var->pixclock, dacspeed24);
+ return -EINVAL;
+ }
+ break;
+ case 25 ... 32:
+ bpp = 32;
+ if ((1000000 / var->pixclock) > DACSPEED32) {
+ dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n",
+ 1000000 / var->pixclock, DACSPEED32);
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ xres = ALIGN(var->xres, 8);
+ vxres = ALIGN(var->xres_virtual, 16);
+ if (vxres < xres)
+ vxres = xres;
+
+ xoffset = ALIGN(var->xoffset, 8);
+ if (xres + xoffset > vxres)
+ xoffset = vxres - xres;
+
+ left = ALIGN(var->left_margin, 8);
+ right = ALIGN(var->right_margin, 8);
+ hslen = ALIGN(var->hsync_len, 8);
+
+ yres = var->yres;
+ vyres = var->yres_virtual;
+ if (yres > vyres)
+ vyres = yres;
+
+ yoffset = var->yoffset;
+ if (yres + yoffset > vyres)
+ yoffset = vyres - yres;
+
+ lower = var->lower_margin;
+ vslen = var->vsync_len;
+ upper = var->upper_margin;
+
+ mem = vxres * vyres * ((bpp + 1) / 8);
+ if (mem > info->screen_size) {
+ dev_err(info->device, "not enough video memory (%d KB requested, %ld KB avaliable)\n",
+ mem >> 10, info->screen_size >> 10);
+ return -ENOMEM;
+ }
+
+ if (yoffset + yres > vyres)
+ yoffset = vyres - yres;
+
+ xtotal = xres + right + hslen + left;
+ ytotal = yres + lower + vslen + upper;
+
+ par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5;
+ par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1;
+ par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1;
+ par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3;
+ par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F)
+ | ((((xres + right + hslen) >> 3) & 0x20) << 2);
+ par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F)
+ | 0x80;
+
+ par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2;
+
+ r7 = 0x10; /* disable linecompare */
+ if (ytotal & 0x100)
+ r7 |= 0x01;
+ if (ytotal & 0x200)
+ r7 |= 0x20;
+
+ par->crtc[VGA_CRTC_PRESET_ROW] = 0;
+ par->crtc[VGA_CRTC_MAX_SCAN] = 0x40; /* 1 scanline, no linecmp */
+ if (var->vmode & FB_VMODE_DOUBLE)
+ par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80;
+ par->crtc[VGA_CRTC_CURSOR_START] = 0x00;
+ par->crtc[VGA_CRTC_CURSOR_END] = 0x00;
+ par->crtc[VGA_CRTC_CURSOR_HI] = 0x00;
+ par->crtc[VGA_CRTC_CURSOR_LO] = 0x00;
+ par->crtc[VGA_CRTC_V_DISP_END] = yres-1;
+ if ((yres-1) & 0x100)
+ r7 |= 0x02;
+ if ((yres-1) & 0x200)
+ r7 |= 0x40;
+
+ par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1;
+ par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1;
+ if ((yres + lower - 1) & 0x100)
+ r7 |= 0x0C;
+ if ((yres + lower - 1) & 0x200) {
+ par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20;
+ r7 |= 0x80;
+ }
+
+ /* disabled IRQ */
+ par->crtc[VGA_CRTC_V_SYNC_END] + ((yres + lower - 1 + vslen) & 0x0F) & ~0x10;
+ /* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */
+ par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF;
+
+ par->crtc[VGA_CRTC_UNDERLINE] = 0x00;
+ par->crtc[VGA_CRTC_MODE] = 0xC3 ;
+ par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF;
+ par->crtc[VGA_CRTC_OVERFLOW] = r7;
+
+ par->vss = 0x00; /* 3DA */
+
+ for (i = 0x00; i < 0x10; i++)
+ par->atc[i] = i;
+ par->atc[VGA_ATC_MODE] = 0x81;
+ par->atc[VGA_ATC_OVERSCAN] = 0x00; /* 0 for EGA, 0xFF for VGA */
+ par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F;
+ par->atc[VGA_ATC_COLOR_PAGE] = 0x00;
+
+ par->misc = 0xC3;
+ if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+ par->misc &= ~0x40;
+ if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+ par->misc &= ~0x80;
+
+ par->seq[VGA_SEQ_CLOCK_MODE] = 0x01;
+ par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F;
+ par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00;
+ par->seq[VGA_SEQ_MEMORY_MODE] = 0x06;
+
+ par->gdc[VGA_GFX_SR_VALUE] = 0x00;
+ par->gdc[VGA_GFX_SR_ENABLE] = 0x00;
+ par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00;
+ par->gdc[VGA_GFX_DATA_ROTATE] = 0x00;
+ par->gdc[VGA_GFX_PLANE_READ] = 0;
+ par->gdc[VGA_GFX_MODE] = 0x02;
+ par->gdc[VGA_GFX_MISC] = 0x05;
+ par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F;
+ par->gdc[VGA_GFX_BIT_MASK] = 0xFF;
+
+ base = (yoffset * vxres + (xoffset & ~7)) >> 2;
+ switch (bpp) {
+ case 8:
+ par->crtc[VGA_CRTC_OFFSET] = vxres >> 3;
+ par->ext_offset = vxres >> 11;
+ par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE;
+ par->bitblt_cntl = COLEXP_8BPP;
+ break;
+ case 15: /* 0rrrrrgg gggbbbbb */
+ case 16: /* rrrrrggg gggbbbbb */
+ par->pixelpipe_cfg1 = (var->green.length = 6) ?
+ DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE;
+ par->crtc[VGA_CRTC_OFFSET] = vxres >> 2;
+ par->ext_offset = vxres >> 10;
+ par->bitblt_cntl = COLEXP_16BPP;
+ base *= 2;
+ break;
+ case 24:
+ par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3;
+ par->ext_offset = (vxres * 3) >> 11;
+ par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE;
+ par->bitblt_cntl = COLEXP_24BPP;
+ base &= 0xFFFFFFFE; /* ...ignore the last bit. */
+ base *= 3;
+ break;
+ case 32:
+ par->crtc[VGA_CRTC_OFFSET] = vxres >> 1;
+ par->ext_offset = vxres >> 9;
+ par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE;
+ par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */
+ base *= 4;
+ break;
+ }
+
+ par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
+ par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8;
+ par->ext_start_addr + ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
+ par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
+
+ par->pixelpipe_cfg0 = DAC_8_BIT;
+
+ par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE;
+ par->io_cntl = EXTENDED_CRTC_CNTL;
+ par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE;
+ par->display_cntl = HIRES_MODE;
+
+ /* Set the MCLK freq */
+ par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */
+
+ /* Calculate the extended CRTC regs */
+ par->ext_vert_total = (ytotal - 2) >> 8;
+ par->ext_vert_disp_end = (yres - 1) >> 8;
+ par->ext_vert_sync_start = (yres + lower) >> 8;
+ par->ext_vert_blank_start = (yres + lower) >> 8;
+ par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8;
+ par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6;
+
+ par->interlace_cntl = INTERLACE_DISABLE;
+
+ /* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */
+ par->atc[VGA_ATC_OVERSCAN] = 0;
+
+ /* Calculate VCLK that most closely matches the requested dot clock */
+ i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par);
+
+ /* Since we program the clocks ourselves, always use VCLK2. */
+ par->misc |= 0x0C;
+
+ /* Calculate the FIFO Watermark and Burst Length. */
+ par->lmi_fifo_watermark + i740_calc_fifo(par, 1000000 / var->pixclock, bpp);
+
+ return 0;
+}
+
+static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.offset = var->green.offset = var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length = 8;
+ break;
+ case 16:
+ switch (var->green.length) {
+ default:
+ case 5:
+ var->red.offset = 10;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ break;
+ case 6:
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = var->blue.length = 5;
+ break;
+ }
+ break;
+ case 24:
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length = 8;
+ break;
+ case 32:
+ var->transp.offset = 24;
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ var->transp.length = 8;
+ var->red.length = var->green.length = var->blue.length = 8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (var->xres > var->xres_virtual)
+ var->xres_virtual = var->xres;
+
+ if (var->yres > var->yres_virtual)
+ var->yres_virtual = var->yres;
+
+ if (info->monspecs.hfmax && info->monspecs.vfmax &&
+ info->monspecs.dclkmax && fb_validate_mode(var, info) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void vga_protect(struct i740fb_par *par)
+{
+ /* disable the display */
+ i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
+
+ i740inb(par, 0x3DA);
+ i740outb(par, VGA_ATT_W, 0x00); /* enable pallete access */
+}
+
+static void vga_unprotect(struct i740fb_par *par)
+{
+ /* reenable display */
+ i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
+
+ i740inb(par, 0x3DA);
+ i740outb(par, VGA_ATT_W, 0x20); /* disable pallete access */
+}
+
+static int i740fb_set_par(struct fb_info *info)
+{
+ struct i740fb_par *par = info->par;
+ u32 itemp;
+ int i;
+
+ i = i740fb_decode_var(&info->var, par, info);
+ if (i)
+ return i;
+
+ memset(info->screen_base, 0, info->screen_size);
+
+ vga_protect(par);
+
+ i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE);
+
+ mdelay(1);
+
+ i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m);
+ i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n);
+ i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs);
+ i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel);
+
+ i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0,
+ par->pixelpipe_cfg0 & DAC_8_BIT, 0x80);
+
+ i740inb(par, 0x3DA);
+ i740outb(par, 0x3C0, 0x00);
+
+ /* update misc output register */
+ i740outb(par, VGA_MIS_W, par->misc | 0x01);
+
+ /* synchronous reset on */
+ i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01);
+ /* write sequencer registers */
+ i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE,
+ par->seq[VGA_SEQ_CLOCK_MODE] | 0x20);
+ for (i = 2; i < VGA_SEQ_C; i++)
+ i740outreg(par, VGA_SEQ_I, i, par->seq[i]);
+
+ /* synchronous reset off */
+ i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03);
+
+ /* deprotect CRT registers 0-7 */
+ i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END,
+ par->crtc[VGA_CRTC_V_SYNC_END]);
+
+ /* write CRT registers */
+ for (i = 0; i < VGA_CRT_C; i++)
+ i740outreg(par, VGA_CRT_IC, i, par->crtc[i]);
+
+ /* write graphics controller registers */
+ for (i = 0; i < VGA_GFX_C; i++)
+ i740outreg(par, VGA_GFX_I, i, par->gdc[i]);
+
+ /* write attribute controller registers */
+ for (i = 0; i < VGA_ATT_C; i++) {
+ i740inb(par, VGA_IS1_RC); /* reset flip-flop */
+ i740outb(par, VGA_ATT_IW, i);
+ i740outb(par, VGA_ATT_IW, par->atc[i]);
+ }
+
+ i740inb(par, VGA_IS1_RC);
+ i740outb(par, VGA_ATT_IW, 0x20);
+
+ i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total);
+ i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end);
+ i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START,
+ par->ext_vert_sync_start);
+ i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START,
+ par->ext_vert_blank_start);
+ i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total);
+ i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank);
+ i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset);
+ i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi);
+ i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr);
+
+ i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL,
+ par->interlace_cntl, INTERLACE_ENABLE);
+ i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F);
+ i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE);
+ i740outreg_mask(par, XRX, DISPLAY_CNTL,
+ par->display_cntl, VGA_WRAP_MODE | GUI_MODE);
+ i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B);
+ i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C);
+
+ i740outreg(par, XRX, PLL_CNTL, par->pll_cntl);
+
+ i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1,
+ par->pixelpipe_cfg1, DISPLAY_COLOR_MODE);
+
+ itemp = readl(par->regs + FWATER_BLC);
+ itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK);
+ itemp |= par->lmi_fifo_watermark;
+ writel(itemp, par->regs + FWATER_BLC);
+
+ i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ);
+
+ i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY);
+ i740outreg_mask(par, XRX, IO_CTNL,
+ par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL);
+
+ if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) {
+ i740outb(par, VGA_PEL_MSK, 0xFF);
+ i740outb(par, VGA_PEL_IW, 0x00);
+ for (i = 0; i < 256; i++) {
+ itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2;
+ i740outb(par, VGA_PEL_D, itemp);
+ i740outb(par, VGA_PEL_D, itemp);
+ i740outb(par, VGA_PEL_D, itemp);
+ }
+ }
+
+ /* Wait for screen to stabilize. */
+ mdelay(50);
+ vga_unprotect(par);
+
+ info->fix.line_length + info->var.xres_virtual * info->var.bits_per_pixel / 8;
+ if (info->var.bits_per_pixel = 8)
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+ return 0;
+}
+
+static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ u32 r, g, b;
+
+ dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n",
+ regno, red, green, blue, transp, info->var.bits_per_pixel);
+
+ switch (info->fix.visual) {
+ case FB_VISUAL_PSEUDOCOLOR:
+ if (regno >= 256)
+ return -EINVAL;
+ i740outb(info->par, VGA_PEL_IW, regno);
+ i740outb(info->par, VGA_PEL_D, red >> 8);
+ i740outb(info->par, VGA_PEL_D, green >> 8);
+ i740outb(info->par, VGA_PEL_D, blue >> 8);
+ break;
+ case FB_VISUAL_TRUECOLOR:
+ if (regno >= 16)
+ return -EINVAL;
+ r = (red >> (16 - info->var.red.length))
+ << info->var.red.offset;
+ b = (blue >> (16 - info->var.blue.length))
+ << info->var.blue.offset;
+ g = (green >> (16 - info->var.green.length))
+ << info->var.green.offset;
+ ((u32 *) info->pseudo_palette)[regno] = r | g | b;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int i740fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct i740fb_par *par = info->par;
+ u32 base = (var->yoffset * info->var.xres_virtual
+ + (var->xoffset & ~7)) >> 2;
+
+ dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n",
+ var->xoffset, var->yoffset, base);
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ break;
+ case 15:
+ case 16:
+ base *= 2;
+ break;
+ case 24:
+ /*
+ * The last bit does not seem to have any effect on the start
+ * address register in 24bpp mode, so...
+ */
+ base &= 0xFFFFFFFE; /* ...ignore the last bit. */
+ base *= 3;
+ break;
+ case 32:
+ base *= 4;
+ break;
+ }
+
+ par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
+ par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >> 8;
+ par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
+ par->ext_start_addr + ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
+
+ i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO, base & 0x000000FF);
+ i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI,
+ (base & 0x0000FF00) >> 8);
+ i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI,
+ (base & 0x3FC00000) >> 22);
+ i740outreg(par, VGA_CRT_IC, EXT_START_ADDR,
+ ((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE);
+
+ return 0;
+}
+
+static int i740fb_blank(int blank_mode, struct fb_info *info)
+{
+ struct i740fb_par *par = info->par;
+
+ unsigned char SEQ01;
+ int DPMSSyncSelect;
+
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ SEQ01 = 0x00;
+ DPMSSyncSelect = HSYNC_ON | VSYNC_ON;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ SEQ01 = 0x20;
+ DPMSSyncSelect = HSYNC_ON | VSYNC_OFF;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ SEQ01 = 0x20;
+ DPMSSyncSelect = HSYNC_OFF | VSYNC_ON;
+ break;
+ case FB_BLANK_POWERDOWN:
+ SEQ01 = 0x20;
+ DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF;
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Turn the screen on/off */
+ i740outb(par, SRX, 0x01);
+ SEQ01 |= i740inb(par, SRX + 1) & ~0x20;
+ i740outb(par, SRX, 0x01);
+ i740outb(par, SRX + 1, SEQ01);
+
+ /* Set the DPMS mode */
+ i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect);
+
+ /* Let fbcon do a soft blank for us */
+ return (blank_mode = FB_BLANK_NORMAL) ? 1 : 0;
+}
+
+static struct fb_ops i740fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = i740fb_open,
+ .fb_release = i740fb_release,
+ .fb_check_var = i740fb_check_var,
+ .fb_set_par = i740fb_set_par,
+ .fb_setcolreg = i740fb_setcolreg,
+ .fb_blank = i740fb_blank,
+ .fb_pan_display = i740fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+/* ------------------------------------------------------------------------- */
+
+static int __devinit i740fb_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ struct fb_info *info;
+ struct i740fb_par *par;
+ int ret, tmp;
+ bool found = false;
+ u8 *edid;
+
+ info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev));
+ if (!info) {
+ dev_err(&(dev->dev), "cannot allocate framebuffer\n");
+ return -ENOMEM;
+ }
+
+ par = info->par;
+ mutex_init(&par->open_lock);
+
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->var.bits_per_pixel = 8;
+ info->fbops = &i740fb_ops;
+ info->pseudo_palette = par->pseudo_palette;
+
+ ret = pci_enable_device(dev);
+ if (ret) {
+ dev_err(info->device, "cannot enable PCI device\n");
+ goto err_enable_device;
+ }
+
+ ret = pci_request_regions(dev, info->fix.id);
+ if (ret) {
+ dev_err(info->device, "error requesting regions\n");
+ goto err_request_regions;
+ }
+
+ info->screen_base = pci_ioremap_bar(dev, 0);
+ if (!info->screen_base) {
+ dev_err(info->device, "error remapping base\n");
+ ret = -ENOMEM;
+ goto err_ioremap_1;
+ }
+
+ par->regs = pci_ioremap_bar(dev, 1);
+ if (!par->regs) {
+ dev_err(info->device, "error remapping MMIO\n");
+ ret = -ENOMEM;
+ goto err_ioremap_2;
+ }
+
+ /* detect memory size */
+ if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1)
+ = DRAM_ROW_1_SDRAM)
+ i740outb(par, XRX, DRAM_ROW_BNDRY_1);
+ else
+ i740outb(par, XRX, DRAM_ROW_BNDRY_0);
+ info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024;
+ /* detect memory type */
+ tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO);
+ par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
+ (tmp & DRAM_RAS_PRECHARGE));
+
+ printk(KERN_INFO "fb%d: Intel740 on %s, %ld KB %s\n", info->node,
+ pci_name(dev), info->screen_size >> 10,
+ par->has_sgram ? "SGRAM" : "SDRAM");
+
+ info->fix = i740fb_fix;
+ info->fix.mmio_start = pci_resource_start(dev, 1);
+ info->fix.mmio_len = pci_resource_len(dev, 1);
+ info->fix.smem_start = pci_resource_start(dev, 0);
+ info->fix.smem_len = info->screen_size;
+ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+
+ if (i740fb_setup_ddc_bus(info) = 0) {
+ par->ddc_registered = true;
+ edid = fb_ddc_read(&par->ddc_adapter);
+ if (edid) {
+ fb_edid_to_monspecs(edid, &info->monspecs);
+ kfree(edid);
+ if (!info->monspecs.modedb)
+ dev_err(info->device,
+ "error getting mode database\n");
+ else {
+ const struct fb_videomode *m;
+
+ fb_videomode_to_modelist(
+ info->monspecs.modedb,
+ info->monspecs.modedb_len,
+ &info->modelist);
+ m = fb_find_best_display(&info->monspecs,
+ &info->modelist);
+ if (m) {
+ fb_videomode_to_var(&info->var, m);
+ /* fill all other info->var's fields */
+ if (!i740fb_check_var(&info->var, info))
+ found = true;
+ }
+ }
+ }
+ }
+
+ if (!mode_option && !found)
+ mode_option = "640x480-8@60";
+
+ if (mode_option) {
+ ret = fb_find_mode(&info->var, info, mode_option,
+ info->monspecs.modedb,
+ info->monspecs.modedb_len,
+ NULL, info->var.bits_per_pixel);
+ if (!ret || ret = 4) {
+ dev_err(info->device, "mode %s not found\n",
+ mode_option);
+ ret = -EINVAL;
+ }
+ }
+
+ fb_destroy_modedb(info->monspecs.modedb);
+ info->monspecs.modedb = NULL;
+
+ /* maximize virtual vertical size for fast scrolling */
+ info->var.yres_virtual = info->fix.smem_len * 8 /
+ (info->var.bits_per_pixel * info->var.xres_virtual);
+
+ if (ret = -EINVAL)
+ goto err_find_mode;
+
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (ret) {
+ dev_err(info->device, "cannot allocate colormap\n");
+ goto err_alloc_cmap;
+ }
+
+ ret = register_framebuffer(info);
+ if (ret) {
+ dev_err(info->device, "error registering framebuffer\n");
+ goto err_reg_framebuffer;
+ }
+
+ printk(KERN_INFO "fb%d: %s frame buffer device\n",
+ info->node, info->fix.id);
+ pci_set_drvdata(dev, info);
+#ifdef CONFIG_MTRR
+ if (mtrr) {
+ par->mtrr_reg = -1;
+ par->mtrr_reg = mtrr_add(info->fix.smem_start,
+ info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
+ }
+#endif
+ return 0;
+
+err_reg_framebuffer:
+ fb_dealloc_cmap(&info->cmap);
+err_alloc_cmap:
+err_find_mode:
+ if (par->ddc_registered)
+ i2c_del_adapter(&par->ddc_adapter);
+ pci_iounmap(dev, par->regs);
+err_ioremap_2:
+ pci_iounmap(dev, info->screen_base);
+err_ioremap_1:
+ pci_release_regions(dev);
+err_request_regions:
+/* pci_disable_device(dev); */
+err_enable_device:
+ framebuffer_release(info);
+ return ret;
+}
+
+static void __devexit i740fb_remove(struct pci_dev *dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+
+ if (info) {
+#ifdef CONFIG_MTRR
+ struct i740fb_par *par = info->par;
+
+ if (par->mtrr_reg >= 0) {
+ mtrr_del(par->mtrr_reg, 0, 0);
+ par->mtrr_reg = -1;
+ }
+#endif
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ if (par->ddc_registered)
+ i2c_del_adapter(&par->ddc_adapter);
+ pci_iounmap(dev, par->regs);
+ pci_iounmap(dev, info->screen_base);
+ pci_release_regions(dev);
+/* pci_disable_device(dev); */
+ pci_set_drvdata(dev, NULL);
+ framebuffer_release(info);
+ }
+}
+
+#ifdef CONFIG_PM
+static int i740fb_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct i740fb_par *par = info->par;
+
+ /* don't disable console during hibernation and wakeup from it */
+ if (state.event = PM_EVENT_FREEZE || state.event = PM_EVENT_PRETHAW)
+ return 0;
+
+ console_lock();
+ mutex_lock(&(par->open_lock));
+
+ /* do nothing if framebuffer is not active */
+ if (par->ref_count = 0) {
+ mutex_unlock(&(par->open_lock));
+ console_unlock();
+ return 0;
+ }
+
+ fb_set_suspend(info, 1);
+
+ pci_save_state(dev);
+ pci_disable_device(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+
+ mutex_unlock(&(par->open_lock));
+ console_unlock();
+
+ return 0;
+}
+
+static int i740fb_resume(struct pci_dev *dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+ struct i740fb_par *par = info->par;
+
+ console_lock();
+ mutex_lock(&(par->open_lock));
+
+ if (par->ref_count = 0)
+ goto fail;
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+ if (pci_enable_device(dev))
+ goto fail;
+
+ i740fb_set_par(info);
+ fb_set_suspend(info, 0);
+
+fail:
+ mutex_unlock(&(par->open_lock));
+ console_unlock();
+ return 0;
+}
+#else
+#define i740fb_suspend NULL
+#define i740fb_resume NULL
+#endif /* CONFIG_PM */
+
+#define I740_ID_PCI 0x00d1
+#define I740_ID_AGP 0x7800
+
+static DEFINE_PCI_DEVICE_TABLE(i740fb_id_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, i740fb_id_table);
+
+static struct pci_driver i740fb_driver = {
+ .name = "i740fb",
+ .id_table = i740fb_id_table,
+ .probe = i740fb_probe,
+ .remove = __devexit_p(i740fb_remove),
+ .suspend = i740fb_suspend,
+ .resume = i740fb_resume,
+};
+
+#ifndef MODULE
+static int __init i740fb_setup(char *options)
+{
+ char *opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+#ifdef CONFIG_MTRR
+ else if (!strncmp(opt, "mtrr:", 5))
+ mtrr = simple_strtoul(opt + 5, NULL, 0);
+#endif
+ else
+ mode_option = opt;
+ }
+
+ return 0;
+}
+#endif
+
+int __init i740fb_init(void)
+{
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("i740fb", &option))
+ return -ENODEV;
+ i740fb_setup(option);
+#endif
+
+ return pci_register_driver(&i740fb_driver);
+}
+
+static void __exit i740fb_exit(void)
+{
+ pci_unregister_driver(&i740fb_driver);
+}
+
+module_init(i740fb_init);
+module_exit(i740fb_exit);
+
+MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("fbdev driver for Intel740");
+
+module_param(mode_option, charp, 0444);
+MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
+
+#ifdef CONFIG_MTRR
+module_param(mtrr, int, 0444);
+MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
+#endif
--- /dev/null 2012-01-24 00:06:39.330222901 +0100
+++ linux-3.2.1/drivers/video/i740_reg.h 2012-01-23 22:55:57.000000000 +0100
@@ -0,0 +1,309 @@
+/**************************************************************************
+
+Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sub license, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice (including the
+next paragraph) shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
+ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+/*
+ * Authors:
+ * Kevin E. Martin <kevin@precisioninsight.com>
+ */
+
+/* I/O register offsets */
+#define SRX VGA_SEQ_I
+#define GRX VGA_GFX_I
+#define ARX VGA_ATT_IW
+#define XRX 0x3D6
+#define MRX 0x3D2
+
+/* VGA Color Palette Registers */
+#define DACMASK 0x3C6
+#define DACSTATE 0x3C7
+#define DACRX 0x3C7
+#define DACWX 0x3C8
+#define DACDATA 0x3C9
+
+/* CRT Controller Registers (CRX) */
+#define START_ADDR_HI 0x0C
+#define START_ADDR_LO 0x0D
+#define VERT_SYNC_END 0x11
+#define EXT_VERT_TOTAL 0x30
+#define EXT_VERT_DISPLAY 0x31
+#define EXT_VERT_SYNC_START 0x32
+#define EXT_VERT_BLANK_START 0x33
+#define EXT_HORIZ_TOTAL 0x35
+#define EXT_HORIZ_BLANK 0x39
+#define EXT_START_ADDR 0x40
+#define EXT_START_ADDR_ENABLE 0x80
+#define EXT_OFFSET 0x41
+#define EXT_START_ADDR_HI 0x42
+#define INTERLACE_CNTL 0x70
+#define INTERLACE_ENABLE 0x80
+#define INTERLACE_DISABLE 0x00
+
+/* Miscellaneous Output Register */
+#define MSR_R 0x3CC
+#define MSR_W 0x3C2
+#define IO_ADDR_SELECT 0x01
+
+#define MDA_BASE 0x3B0
+#define CGA_BASE 0x3D0
+
+/* System Configuration Extension Registers (XRX) */
+#define IO_CTNL 0x09
+#define EXTENDED_ATTR_CNTL 0x02
+#define EXTENDED_CRTC_CNTL 0x01
+
+#define ADDRESS_MAPPING 0x0A
+#define PACKED_MODE_ENABLE 0x04
+#define LINEAR_MODE_ENABLE 0x02
+#define PAGE_MAPPING_ENABLE 0x01
+
+#define BITBLT_CNTL 0x20
+#define COLEXP_MODE 0x30
+#define COLEXP_8BPP 0x00
+#define COLEXP_16BPP 0x10
+#define COLEXP_24BPP 0x20
+#define COLEXP_RESERVED 0x30
+#define CHIP_RESET 0x02
+#define BITBLT_STATUS 0x01
+
+#define DISPLAY_CNTL 0x40
+#define VGA_WRAP_MODE 0x02
+#define VGA_WRAP_AT_256KB 0x00
+#define VGA_NO_WRAP 0x02
+#define GUI_MODE 0x01
+#define STANDARD_VGA_MODE 0x00
+#define HIRES_MODE 0x01
+
+#define DRAM_ROW_TYPE 0x50
+#define DRAM_ROW_0 0x07
+#define DRAM_ROW_0_SDRAM 0x00
+#define DRAM_ROW_0_EMPTY 0x07
+#define DRAM_ROW_1 0x38
+#define DRAM_ROW_1_SDRAM 0x00
+#define DRAM_ROW_1_EMPTY 0x38
+#define DRAM_ROW_CNTL_LO 0x51
+#define DRAM_CAS_LATENCY 0x10
+#define DRAM_RAS_TIMING 0x08
+#define DRAM_RAS_PRECHARGE 0x04
+#define DRAM_ROW_CNTL_HI 0x52
+#define DRAM_EXT_CNTL 0x53
+#define DRAM_REFRESH_RATE 0x03
+#define DRAM_REFRESH_DISABLE 0x00
+#define DRAM_REFRESH_60HZ 0x01
+#define DRAM_REFRESH_FAST_TEST 0x02
+#define DRAM_REFRESH_RESERVED 0x03
+#define DRAM_TIMING 0x54
+#define DRAM_ROW_BNDRY_0 0x55
+#define DRAM_ROW_BNDRY_1 0x56
+
+#define DPMS_SYNC_SELECT 0x61
+#define VSYNC_CNTL 0x08
+#define VSYNC_ON 0x00
+#define VSYNC_OFF 0x08
+#define HSYNC_CNTL 0x02
+#define HSYNC_ON 0x00
+#define HSYNC_OFF 0x02
+
+#define PIXPIPE_CONFIG_0 0x80
+#define DAC_8_BIT 0x80
+#define DAC_6_BIT 0x00
+#define HW_CURSOR_ENABLE 0x10
+#define EXTENDED_PALETTE 0x01
+
+#define PIXPIPE_CONFIG_1 0x81
+#define DISPLAY_COLOR_MODE 0x0F
+#define DISPLAY_VGA_MODE 0x00
+#define DISPLAY_8BPP_MODE 0x02
+#define DISPLAY_15BPP_MODE 0x04
+#define DISPLAY_16BPP_MODE 0x05
+#define DISPLAY_24BPP_MODE 0x06
+#define DISPLAY_32BPP_MODE 0x07
+
+#define PIXPIPE_CONFIG_2 0x82
+#define DISPLAY_GAMMA_ENABLE 0x08
+#define DISPLAY_GAMMA_DISABLE 0x00
+#define OVERLAY_GAMMA_ENABLE 0x04
+#define OVERLAY_GAMMA_DISABLE 0x00
+
+#define CURSOR_CONTROL 0xA0
+#define CURSOR_ORIGIN_SCREEN 0x00
+#define CURSOR_ORIGIN_DISPLAY 0x10
+#define CURSOR_MODE 0x07
+#define CURSOR_MODE_DISABLE 0x00
+#define CURSOR_MODE_32_4C_AX 0x01
+#define CURSOR_MODE_128_2C 0x02
+#define CURSOR_MODE_128_1C 0x03
+#define CURSOR_MODE_64_3C 0x04
+#define CURSOR_MODE_64_4C_AX 0x05
+#define CURSOR_MODE_64_4C 0x06
+#define CURSOR_MODE_RESERVED 0x07
+#define CURSOR_BASEADDR_LO 0xA2
+#define CURSOR_BASEADDR_HI 0xA3
+#define CURSOR_X_LO 0xA4
+#define CURSOR_X_HI 0xA5
+#define CURSOR_X_POS 0x00
+#define CURSOR_X_NEG 0x80
+#define CURSOR_Y_LO 0xA6
+#define CURSOR_Y_HI 0xA7
+#define CURSOR_Y_POS 0x00
+#define CURSOR_Y_NEG 0x80
+
+#define VCLK2_VCO_M 0xC8
+#define VCLK2_VCO_N 0xC9
+#define VCLK2_VCO_MN_MSBS 0xCA
+#define VCO_N_MSBS 0x30
+#define VCO_M_MSBS 0x03
+#define VCLK2_VCO_DIV_SEL 0xCB
+#define POST_DIV_SELECT 0x70
+#define POST_DIV_1 0x00
+#define POST_DIV_2 0x10
+#define POST_DIV_4 0x20
+#define POST_DIV_8 0x30
+#define POST_DIV_16 0x40
+#define POST_DIV_32 0x50
+#define VCO_LOOP_DIV_BY_4M 0x00
+#define VCO_LOOP_DIV_BY_16M 0x04
+#define REF_CLK_DIV_BY_5 0x02
+#define REF_DIV_4 0x00
+#define REF_DIV_1 0x01
+
+#define PLL_CNTL 0xCE
+#define PLL_MEMCLK_SEL 0x03
+#define PLL_MEMCLK__66667KHZ 0x00
+#define PLL_MEMCLK__75000KHZ 0x01
+#define PLL_MEMCLK__88889KHZ 0x02
+#define PLL_MEMCLK_100000KHZ 0x03
+
+/* Multimedia Extension Registers (MRX) */
+#define ACQ_CNTL_1 0x02
+#define ACQ_CNTL_2 0x03
+#define FRAME_CAP_MODE 0x01
+#define CONT_CAP_MODE 0x00
+#define SINGLE_CAP_MODE 0x01
+#define ACQ_CNTL_3 0x04
+#define COL_KEY_CNTL_1 0x3C
+#define BLANK_DISP_OVERLAY 0x20
+
+/* FIFOs */
+#define LP_FIFO 0x1000
+#define HP_FIFO 0x2000
+#define INSTPNT 0x3040
+#define LP_FIFO_COUNT 0x3040
+#define HP_FIFO_COUNT 0x3041
+
+/* FIFO Commands */
+#define CLIENT 0xE0000000
+#define CLIENT_2D 0x60000000
+
+/* Command Parser Mode Register */
+#define COMPARS 0x3038
+#define TWO_D_INST_DISABLE 0x08
+#define THREE_D_INST_DISABLE 0x04
+#define STATE_VAR_UPDATE_DISABLE 0x02
+#define PAL_STIP_DISABLE 0x01
+
+/* Interrupt Control Registers */
+#define IER 0x3030
+#define IIR 0x3032
+#define IMR 0x3034
+#define ISR 0x3036
+#define VMIINTB_EVENT 0x2000
+#define GPIO4_INT 0x1000
+#define DISP_FLIP_EVENT 0x0800
+#define DVD_PORT_DMA 0x0400
+#define DISP_VBLANK 0x0200
+#define FIFO_EMPTY_DMA_DONE 0x0100
+#define INST_PARSER_ERROR 0x0080
+#define USER_DEFINED 0x0040
+#define BREAKPOINT 0x0020
+#define DISP_HORIZ_COUNT 0x0010
+#define DISP_VSYNC 0x0008
+#define CAPTURE_HORIZ_COUNT 0x0004
+#define CAPTURE_VSYNC 0x0002
+#define THREE_D_PIPE_FLUSHED 0x0001
+
+/* FIFO Watermark and Burst Length Control Register */
+#define FWATER_BLC 0x00006000
+#define LMI_BURST_LENGTH 0x7F000000
+#define LMI_FIFO_WATERMARK 0x003F0000
+#define AGP_BURST_LENGTH 0x00007F00
+#define AGP_FIFO_WATERMARK 0x0000003F
+
+/* BitBLT Registers */
+#define SRC_DST_PITCH 0x00040000
+#define DST_PITCH 0x1FFF0000
+#define SRC_PITCH 0x00001FFF
+#define COLEXP_BG_COLOR 0x00040004
+#define COLEXP_FG_COLOR 0x00040008
+#define MONO_SRC_CNTL 0x0004000C
+#define MONO_USE_COLEXP 0x00000000
+#define MONO_USE_SRCEXP 0x08000000
+#define MONO_DATA_ALIGN 0x07000000
+#define MONO_BIT_ALIGN 0x01000000
+#define MONO_BYTE_ALIGN 0x02000000
+#define MONO_WORD_ALIGN 0x03000000
+#define MONO_DWORD_ALIGN 0x04000000
+#define MONO_QWORD_ALIGN 0x05000000
+#define MONO_SRC_INIT_DSCRD 0x003F0000
+#define MONO_SRC_RIGHT_CLIP 0x00003F00
+#define MONO_SRC_LEFT_CLIP 0x0000003F
+#define BITBLT_CONTROL 0x00040010
+#define BLTR_STATUS 0x80000000
+#define DYN_DEPTH 0x03000000
+#define DYN_DEPTH_8BPP 0x00000000
+#define DYN_DEPTH_16BPP 0x01000000
+#define DYN_DEPTH_24BPP 0x02000000
+#define DYN_DEPTH_32BPP 0x03000000 /* Unimplemented on the i740 */
+#define DYN_DEPTH_ENABLE 0x00800000
+#define PAT_VERT_ALIGN 0x00700000
+#define SOLID_PAT_SELECT 0x00080000
+#define PAT_IS_IN_COLOR 0x00000000
+#define PAT_IS_MONO 0x00040000
+#define MONO_PAT_TRANSP 0x00020000
+#define COLOR_TRANSP_ROP 0x00000000
+#define COLOR_TRANSP_DST 0x00008000
+#define COLOR_TRANSP_EQ 0x00000000
+#define COLOR_TRANSP_NOT_EQ 0x00010000
+#define COLOR_TRANSP_ENABLE 0x00004000
+#define MONO_SRC_TRANSP 0x00002000
+#define SRC_IS_IN_COLOR 0x00000000
+#define SRC_IS_MONO 0x00001000
+#define SRC_USE_SRC_ADDR 0x00000000
+#define SRC_USE_BLTDATA 0x00000400
+#define BLT_TOP_TO_BOT 0x00000000
+#define BLT_BOT_TO_TOP 0x00000200
+#define BLT_LEFT_TO_RIGHT 0x00000000
+#define BLT_RIGHT_TO_LEFT 0x00000100
+#define BLT_ROP 0x000000FF
+#define BLT_PAT_ADDR 0x00040014
+#define BLT_SRC_ADDR 0x00040018
+#define BLT_DST_ADDR 0x0004001C
+#define BLT_DST_H_W 0x00040020
+#define BLT_DST_HEIGHT 0x1FFF0000
+#define BLT_DST_WIDTH 0x00001FFF
+#define SRCEXP_BG_COLOR 0x00040024
+#define SRCEXP_FG_COLOR 0x00040028
+#define BLTDATA 0x00050000
--
Ondrej Zary
^ permalink raw reply
* Re: [PATCH] fbdev: sh_mipi_dsi: add extra settings method for platform
From: Kuninori Morimoto @ 2012-01-24 0:48 UTC (permalink / raw)
To: linux-fbdev
In-Reply-To: <874nvnhupd.wl%kuninori.morimoto.gx@renesas.com>
Hi Laurent
Cc Magnus, Guennadi
Thank you for checking patch
> > + void (*set_dcs)(int handle,
> > + int (*mipi_dcs)(int handle, u8 cmd),
> > + int (*mipi_dcs_param)(int handle, u8 cmd, u8 param));
>
> I don't think this is a good idea. First of all, we should reduce the number
> of board code callbacks to make transition to the device tree easier. Then,
> passing two functions to board code to read and write any device register
> without the driver having any knowledge about that is a clear violation of the
> device model, and will result in problems sooner or later.
>
> What MIPI settings do platforms need to modify ? Can those settings be
> expressed as data in the sh_mipi_dsi_info structure instead ?
Hmm... now I'm in dilemma.
Actually this is v2 patch for mipi display.
(v1 patch was dropped since merge window issue)
The v1 patch was data-table style for mipi display initialization.
(if platform had init data-table, driver used it)
But someone reviewed it and teach me that it is not-good idea.
So, I created this style in v2.
Now platform needs "backlight ON" and "memory write ON" command,
but I could not find these command on include/video/mipi_display.h.
So, I thought it is platform specific command.
Best regards
---
Kuninori Morimoto
^ permalink raw reply
* [PATCH 00/16] OMAPDSS: old OMAPFB cleanup
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
Now that all omap2+ boards have been changed to use the newer omapdss driver,
this patch series removes omap2+ support from the old omapfb driver
(drivers/video/omap), and thus makes it an omap1 dss/fb driver.
The use of SRAM for video ram had earlier been disabled by removing the SRAM
allocation (fee926bb0d399b1eaaf38f9f694bbf2747c4b8a2), and now this series also
removes the support from the omap fb drivers.
Also various cleanup patches allow us to remove remove OMAP_TAG_LCD and
OMAP_TAG_FBMEM.
All in all, the series removes quite a bit of unneeded code and cleans up the
links between the board files and the display drivers, and this should help
with device tree adaptation.
Some of the patches affect the newer omapdss and omapfb drivers, but mostly the
patches deal with omap1. I have compile tested the series for both omap1 and
omap2, but I have only tested this on OMAP3 and OMAP4 boards, as I don't have
OMAP1/2 boards. I think N770's display won't work after these patches, but
other OMAP1 boards should be ok. To fix N770's display requires knowledge of
the hardware setup, which is currently passed from the bootloader.
Tomi
Tomi Valkeinen (16):
OMAPFB: remove old blizzard driver
OMAPFB: Remove OMAP2/3 support from old omapfb driver
OMAPDSS: Remove video SRAM support
OMAPFB: Remove video SRAM support (old omapfb)
OMAP2+: remove unneeded #include omapfb.h
OMAP: N770: remove HWA742 platform data
OAMPFB: remove unused omapfb_set_ctrl_platform_data()
OMAPFB: remove early mem alloc from old omapfb
OMAPFB: remove mem info from platform_data
OMAPFB: remove unused fb_format_to_dss_mode()
OMAPFB: Move old omapfb private structs to a private include file
OMAPFB: remove omapfb_set_platform_data()
OMAP1: pass LCD config with omapfb_set_lcd_config()
OMAP: Remove OMAP_TAG_LCD and OMAP_TAG_FBMEM
OMAP1: Remove unused LCD devices from board files
OMAPFB: remove remaining OMAP arch checks
arch/arm/mach-omap1/board-ams-delta.c | 9 +-
arch/arm/mach-omap1/board-fsample.c | 15 +-
arch/arm/mach-omap1/board-h2.c | 15 +-
arch/arm/mach-omap1/board-h3.c | 9 +-
arch/arm/mach-omap1/board-htcherald.c | 9 +-
arch/arm/mach-omap1/board-innovator.c | 11 +-
arch/arm/mach-omap1/board-nokia770.c | 19 +-
arch/arm/mach-omap1/board-osk.c | 14 +-
arch/arm/mach-omap1/board-palmte.c | 10 +-
arch/arm/mach-omap1/board-palmtt.c | 10 +-
arch/arm/mach-omap1/board-palmz71.c | 10 +-
arch/arm/mach-omap1/board-perseus2.c | 15 +-
arch/arm/mach-omap1/board-sx1.c | 16 +-
arch/arm/mach-omap2/io.c | 1 -
arch/arm/plat-omap/common.c | 2 -
arch/arm/plat-omap/fb.c | 336 +------
arch/arm/plat-omap/fb.h | 10 -
arch/arm/plat-omap/include/plat/blizzard.h | 12 -
arch/arm/plat-omap/include/plat/board.h | 2 -
arch/arm/plat-omap/include/plat/hwa742.h | 8 -
arch/arm/plat-omap/include/plat/vram.h | 21 +-
drivers/video/omap/Kconfig | 16 +-
drivers/video/omap/Makefile | 12 +-
drivers/video/omap/blizzard.c | 1648 ----------------------------
drivers/video/omap/dispc.c | 1547 --------------------------
drivers/video/omap/dispc.h | 46 -
drivers/video/omap/hwa742.c | 21 +-
drivers/video/omap/omapfb.h | 25 +-
drivers/video/omap/omapfb_main.c | 30 +-
drivers/video/omap/rfbi.c | 598 ----------
drivers/video/omap2/dss/dispc.c | 1 -
drivers/video/omap2/omapfb/omapfb-ioctl.c | 2 +-
drivers/video/omap2/omapfb/omapfb-main.c | 101 +--
drivers/video/omap2/vram.c | 99 +--
include/linux/omapfb.h | 32 +-
35 files changed, 100 insertions(+), 4632 deletions(-)
delete mode 100644 arch/arm/plat-omap/fb.h
delete mode 100644 arch/arm/plat-omap/include/plat/blizzard.h
delete mode 100644 arch/arm/plat-omap/include/plat/hwa742.h
delete mode 100644 drivers/video/omap/blizzard.c
delete mode 100644 drivers/video/omap/dispc.c
delete mode 100644 drivers/video/omap/dispc.h
delete mode 100644 drivers/video/omap/rfbi.c
--
1.7.4.1
^ permalink raw reply
* [PATCH 01/16] OMAPFB: remove old blizzard driver
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
N8x0's blizzard driver has been ported to new omapdss driver, so we can
now remove the old blizzard driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/include/plat/blizzard.h | 12 -
drivers/video/omap/Kconfig | 7 -
drivers/video/omap/Makefile | 1 -
drivers/video/omap/blizzard.c | 1648 ----------------------------
drivers/video/omap/omapfb_main.c | 4 -
5 files changed, 0 insertions(+), 1672 deletions(-)
delete mode 100644 arch/arm/plat-omap/include/plat/blizzard.h
delete mode 100644 drivers/video/omap/blizzard.c
diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
deleted file mode 100644
index 56e7f2e..0000000
--- a/arch/arm/plat-omap/include/plat/blizzard.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _BLIZZARD_H
-#define _BLIZZARD_H
-
-struct blizzard_platform_data {
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
- unsigned long (*get_clock_rate)(struct device *dev);
-
- unsigned te_connected:1;
-};
-
-#endif
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 84ff232..ab234d5 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -23,13 +23,6 @@ config FB_OMAP_LCDC_HWA742
Say Y here if you want to have support for the external
Epson HWA742 LCD controller.
-config FB_OMAP_LCDC_BLIZZARD
- bool "Epson Blizzard LCD controller support"
- depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
- help
- Say Y here if you want to have support for the external
- Epson Blizzard LCD controller.
-
config FB_OMAP_MANUAL_UPDATE
bool "Default to manual update mode"
depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index ef78550..7042a4a 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -14,7 +14,6 @@ objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
-objs-y$(CONFIG_FB_OMAP_LCDC_BLIZZARD) += blizzard.o
objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
deleted file mode 100644
index c0504a8..0000000
--- a/drivers/video/omap/blizzard.c
+++ /dev/null
@@ -1,1648 +0,0 @@
-/*
- * Epson Blizzard LCD controller driver
- *
- * Copyright (C) 2004-2005 Nokia Corporation
- * Authors: Juha Yrjola <juha.yrjola@nokia.com>
- * Imre Deak <imre.deak@nokia.com>
- * YUV support: Jussi Laako <jussi.laako@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <plat/dma.h>
-#include <plat/blizzard.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-#define MODULE_NAME "blizzard"
-
-#define BLIZZARD_REV_CODE 0x00
-#define BLIZZARD_CONFIG 0x02
-#define BLIZZARD_PLL_DIV 0x04
-#define BLIZZARD_PLL_LOCK_RANGE 0x06
-#define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08
-#define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a
-#define BLIZZARD_PLL_MODE 0x0c
-#define BLIZZARD_CLK_SRC 0x0e
-#define BLIZZARD_MEM_BANK0_ACTIVATE 0x10
-#define BLIZZARD_MEM_BANK0_STATUS 0x14
-#define BLIZZARD_PANEL_CONFIGURATION 0x28
-#define BLIZZARD_HDISP 0x2a
-#define BLIZZARD_HNDP 0x2c
-#define BLIZZARD_VDISP0 0x2e
-#define BLIZZARD_VDISP1 0x30
-#define BLIZZARD_VNDP 0x32
-#define BLIZZARD_HSW 0x34
-#define BLIZZARD_VSW 0x38
-#define BLIZZARD_DISPLAY_MODE 0x68
-#define BLIZZARD_INPUT_WIN_X_START_0 0x6c
-#define BLIZZARD_DATA_SOURCE_SELECT 0x8e
-#define BLIZZARD_DISP_MEM_DATA_PORT 0x90
-#define BLIZZARD_DISP_MEM_READ_ADDR0 0x92
-#define BLIZZARD_POWER_SAVE 0xE6
-#define BLIZZARD_NDISP_CTRL_STATUS 0xE8
-
-/* Data source select */
-/* For S1D13745 */
-#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00
-#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01
-#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04
-#define BLIZZARD_SRC_DISABLE_OVERLAY 0x05
-/* For S1D13744 */
-#define BLIZZARD_SRC_WRITE_LCD 0x00
-#define BLIZZARD_SRC_BLT_LCD 0x06
-
-#define BLIZZARD_COLOR_RGB565 0x01
-#define BLIZZARD_COLOR_YUV420 0x09
-
-#define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */
-#define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */
-
-#define BLIZZARD_AUTO_UPDATE_TIME (HZ / 20)
-
-/* Reserve 4 request slots for requests in irq context */
-#define REQ_POOL_SIZE 24
-#define IRQ_REQ_POOL_SIZE 4
-
-#define REQ_FROM_IRQ_POOL 0x01
-
-#define REQ_COMPLETE 0
-#define REQ_PENDING 1
-
-struct blizzard_reg_list {
- int start;
- int end;
-};
-
-/* These need to be saved / restored separately from the rest. */
-static const struct blizzard_reg_list blizzard_pll_regs[] = {
- {
- .start = 0x04, /* Don't save PLL ctrl (0x0C) */
- .end = 0x0a,
- },
- {
- .start = 0x0e, /* Clock configuration */
- .end = 0x0e,
- },
-};
-
-static const struct blizzard_reg_list blizzard_gen_regs[] = {
- {
- .start = 0x18, /* SDRAM control */
- .end = 0x20,
- },
- {
- .start = 0x28, /* LCD Panel configuration */
- .end = 0x5a, /* HSSI interface, TV configuration */
- },
-};
-
-static u8 blizzard_reg_cache[0x5a / 2];
-
-struct update_param {
- int plane;
- int x, y, width, height;
- int out_x, out_y;
- int out_width, out_height;
- int color_mode;
- int bpp;
- int flags;
-};
-
-struct blizzard_request {
- struct list_head entry;
- unsigned int flags;
-
- int (*handler)(struct blizzard_request *req);
- void (*complete)(void *data);
- void *complete_data;
-
- union {
- struct update_param update;
- struct completion *sync;
- } par;
-};
-
-struct plane_info {
- unsigned long offset;
- int pos_x, pos_y;
- int width, height;
- int out_width, out_height;
- int scr_width;
- int color_mode;
- int bpp;
-};
-
-struct blizzard_struct {
- enum omapfb_update_mode update_mode;
- enum omapfb_update_mode update_mode_before_suspend;
-
- struct timer_list auto_update_timer;
- int stop_auto_update;
- struct omapfb_update_window auto_update_window;
- int enabled_planes;
- int vid_nonstd_color;
- int vid_scaled;
- int last_color_mode;
- int zoom_on;
- int zoom_area_gx1;
- int zoom_area_gx2;
- int zoom_area_gy1;
- int zoom_area_gy2;
- int screen_width;
- int screen_height;
- unsigned te_connected:1;
- unsigned vsync_only:1;
-
- struct plane_info plane[OMAPFB_PLANE_NUM];
-
- struct blizzard_request req_pool[REQ_POOL_SIZE];
- struct list_head pending_req_list;
- struct list_head free_req_list;
- struct semaphore req_sema;
- spinlock_t req_lock;
-
- unsigned long sys_ck_rate;
- struct extif_timings reg_timings, lut_timings;
-
- u32 max_transmit_size;
- u32 extif_clk_period;
- int extif_clk_div;
- unsigned long pix_tx_time;
- unsigned long line_upd_time;
-
- struct omapfb_device *fbdev;
- struct lcd_ctrl_extif *extif;
- const struct lcd_ctrl *int_ctrl;
-
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
-
- int version;
-} blizzard;
-
-struct lcd_ctrl blizzard_ctrl;
-
-static u8 blizzard_read_reg(u8 reg)
-{
- u8 data;
-
- blizzard.extif->set_bits_per_cycle(8);
- blizzard.extif->write_command(®, 1);
- blizzard.extif->read_data(&data, 1);
-
- return data;
-}
-
-static void blizzard_write_reg(u8 reg, u8 val)
-{
- blizzard.extif->set_bits_per_cycle(8);
- blizzard.extif->write_command(®, 1);
- blizzard.extif->write_data(&val, 1);
-}
-
-static void blizzard_restart_sdram(void)
-{
- unsigned long tmo;
-
- blizzard_write_reg(BLIZZARD_MEM_BANK0_ACTIVATE, 0);
- udelay(50);
- blizzard_write_reg(BLIZZARD_MEM_BANK0_ACTIVATE, 1);
- tmo = jiffies + msecs_to_jiffies(200);
- while (!(blizzard_read_reg(BLIZZARD_MEM_BANK0_STATUS) & 0x01)) {
- if (time_after(jiffies, tmo)) {
- dev_err(blizzard.fbdev->dev,
- "s1d1374x: SDRAM not ready\n");
- break;
- }
- msleep(1);
- }
-}
-
-static void blizzard_stop_sdram(void)
-{
- blizzard_write_reg(BLIZZARD_MEM_BANK0_ACTIVATE, 0);
-}
-
-/* Wait until the last window was completely written into the controllers
- * SDRAM and we can start transferring the next window.
- */
-static void blizzard_wait_line_buffer(void)
-{
- unsigned long tmo = jiffies + msecs_to_jiffies(30);
-
- while (blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS) & (1 << 7)) {
- if (time_after(jiffies, tmo)) {
- if (printk_ratelimit())
- dev_err(blizzard.fbdev->dev,
- "s1d1374x: line buffer not ready\n");
- break;
- }
- }
-}
-
-/* Wait until the YYC color space converter is idle. */
-static void blizzard_wait_yyc(void)
-{
- unsigned long tmo = jiffies + msecs_to_jiffies(30);
-
- while (blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS) & (1 << 4)) {
- if (time_after(jiffies, tmo)) {
- if (printk_ratelimit())
- dev_err(blizzard.fbdev->dev,
- "s1d1374x: YYC not ready\n");
- break;
- }
- }
-}
-
-static void disable_overlay(void)
-{
- blizzard_write_reg(BLIZZARD_DATA_SOURCE_SELECT,
- BLIZZARD_SRC_DISABLE_OVERLAY);
-}
-
-static void set_window_regs(int x_start, int y_start, int x_end, int y_end,
- int x_out_start, int y_out_start,
- int x_out_end, int y_out_end, int color_mode,
- int zoom_off, int flags)
-{
- u8 tmp[18];
- u8 cmd;
-
- x_end--;
- y_end--;
- tmp[0] = x_start;
- tmp[1] = x_start >> 8;
- tmp[2] = y_start;
- tmp[3] = y_start >> 8;
- tmp[4] = x_end;
- tmp[5] = x_end >> 8;
- tmp[6] = y_end;
- tmp[7] = y_end >> 8;
-
- x_out_end--;
- y_out_end--;
- tmp[8] = x_out_start;
- tmp[9] = x_out_start >> 8;
- tmp[10] = y_out_start;
- tmp[11] = y_out_start >> 8;
- tmp[12] = x_out_end;
- tmp[13] = x_out_end >> 8;
- tmp[14] = y_out_end;
- tmp[15] = y_out_end >> 8;
-
- tmp[16] = color_mode;
- if (zoom_off && blizzard.version = BLIZZARD_VERSION_S1D13745)
- tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND;
- else if (flags & OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY)
- tmp[17] = BLIZZARD_SRC_WRITE_OVERLAY_ENABLE;
- else
- tmp[17] = blizzard.version = BLIZZARD_VERSION_S1D13744 ?
- BLIZZARD_SRC_WRITE_LCD :
- BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
-
- blizzard.extif->set_bits_per_cycle(8);
- cmd = BLIZZARD_INPUT_WIN_X_START_0;
- blizzard.extif->write_command(&cmd, 1);
- blizzard.extif->write_data(tmp, 18);
-}
-
-static void enable_tearsync(int y, int width, int height, int screen_height,
- int out_height, int force_vsync)
-{
- u8 b;
-
- b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
- b |= 1 << 3;
- blizzard_write_reg(BLIZZARD_NDISP_CTRL_STATUS, b);
-
- if (likely(blizzard.vsync_only || force_vsync)) {
- blizzard.extif->enable_tearsync(1, 0);
- return;
- }
-
- if (width * blizzard.pix_tx_time < blizzard.line_upd_time) {
- blizzard.extif->enable_tearsync(1, 0);
- return;
- }
-
- if ((width * blizzard.pix_tx_time / 1000) * height <
- (y + out_height) * (blizzard.line_upd_time / 1000)) {
- blizzard.extif->enable_tearsync(1, 0);
- return;
- }
-
- blizzard.extif->enable_tearsync(1, y + 1);
-}
-
-static void disable_tearsync(void)
-{
- u8 b;
-
- blizzard.extif->enable_tearsync(0, 0);
- b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
- b &= ~(1 << 3);
- blizzard_write_reg(BLIZZARD_NDISP_CTRL_STATUS, b);
- b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
-}
-
-static inline void set_extif_timings(const struct extif_timings *t);
-
-static inline struct blizzard_request *alloc_req(void)
-{
- unsigned long flags;
- struct blizzard_request *req;
- int req_flags = 0;
-
- if (!in_interrupt())
- down(&blizzard.req_sema);
- else
- req_flags = REQ_FROM_IRQ_POOL;
-
- spin_lock_irqsave(&blizzard.req_lock, flags);
- BUG_ON(list_empty(&blizzard.free_req_list));
- req = list_entry(blizzard.free_req_list.next,
- struct blizzard_request, entry);
- list_del(&req->entry);
- spin_unlock_irqrestore(&blizzard.req_lock, flags);
-
- INIT_LIST_HEAD(&req->entry);
- req->flags = req_flags;
-
- return req;
-}
-
-static inline void free_req(struct blizzard_request *req)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&blizzard.req_lock, flags);
-
- list_move(&req->entry, &blizzard.free_req_list);
- if (!(req->flags & REQ_FROM_IRQ_POOL))
- up(&blizzard.req_sema);
-
- spin_unlock_irqrestore(&blizzard.req_lock, flags);
-}
-
-static void process_pending_requests(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&blizzard.req_lock, flags);
-
- while (!list_empty(&blizzard.pending_req_list)) {
- struct blizzard_request *req;
- void (*complete)(void *);
- void *complete_data;
-
- req = list_entry(blizzard.pending_req_list.next,
- struct blizzard_request, entry);
- spin_unlock_irqrestore(&blizzard.req_lock, flags);
-
- if (req->handler(req) = REQ_PENDING)
- return;
-
- complete = req->complete;
- complete_data = req->complete_data;
- free_req(req);
-
- if (complete)
- complete(complete_data);
-
- spin_lock_irqsave(&blizzard.req_lock, flags);
- }
-
- spin_unlock_irqrestore(&blizzard.req_lock, flags);
-}
-
-static void submit_req_list(struct list_head *head)
-{
- unsigned long flags;
- int process = 1;
-
- spin_lock_irqsave(&blizzard.req_lock, flags);
- if (likely(!list_empty(&blizzard.pending_req_list)))
- process = 0;
- list_splice_init(head, blizzard.pending_req_list.prev);
- spin_unlock_irqrestore(&blizzard.req_lock, flags);
-
- if (process)
- process_pending_requests();
-}
-
-static void request_complete(void *data)
-{
- struct blizzard_request *req = (struct blizzard_request *)data;
- void (*complete)(void *);
- void *complete_data;
-
- complete = req->complete;
- complete_data = req->complete_data;
-
- free_req(req);
-
- if (complete)
- complete(complete_data);
-
- process_pending_requests();
-}
-
-
-static int do_full_screen_update(struct blizzard_request *req)
-{
- int i;
- int flags;
-
- for (i = 0; i < 3; i++) {
- struct plane_info *p = &blizzard.plane[i];
- if (!(blizzard.enabled_planes & (1 << i))) {
- blizzard.int_ctrl->enable_plane(i, 0);
- continue;
- }
- dev_dbg(blizzard.fbdev->dev, "pw %d ph %d\n",
- p->width, p->height);
- blizzard.int_ctrl->setup_plane(i,
- OMAPFB_CHANNEL_OUT_LCD, p->offset,
- p->scr_width, p->pos_x, p->pos_y,
- p->width, p->height,
- p->color_mode);
- blizzard.int_ctrl->enable_plane(i, 1);
- }
-
- dev_dbg(blizzard.fbdev->dev, "sw %d sh %d\n",
- blizzard.screen_width, blizzard.screen_height);
- blizzard_wait_line_buffer();
- flags = req->par.update.flags;
- if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC)
- enable_tearsync(0, blizzard.screen_width,
- blizzard.screen_height,
- blizzard.screen_height,
- blizzard.screen_height,
- flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC);
- else
- disable_tearsync();
-
- set_window_regs(0, 0, blizzard.screen_width, blizzard.screen_height,
- 0, 0, blizzard.screen_width, blizzard.screen_height,
- BLIZZARD_COLOR_RGB565, blizzard.zoom_on, flags);
- blizzard.zoom_on = 0;
-
- blizzard.extif->set_bits_per_cycle(16);
- /* set_window_regs has left the register index at the right
- * place, so no need to set it here.
- */
- blizzard.extif->transfer_area(blizzard.screen_width,
- blizzard.screen_height,
- request_complete, req);
- return REQ_PENDING;
-}
-
-static int check_1d_intersect(int a1, int a2, int b1, int b2)
-{
- if (a2 <= b1 || b2 <= a1)
- return 0;
- return 1;
-}
-
-/* Setup all planes with an overlapping area with the update window. */
-static int do_partial_update(struct blizzard_request *req, int plane,
- int x, int y, int w, int h,
- int x_out, int y_out, int w_out, int h_out,
- int wnd_color_mode, int bpp)
-{
- int i;
- int gx1, gy1, gx2, gy2;
- int gx1_out, gy1_out, gx2_out, gy2_out;
- int color_mode;
- int flags;
- int zoom_off;
- int have_zoom_for_this_update = 0;
-
- /* Global coordinates, relative to pixel 0,0 of the LCD */
- gx1 = x + blizzard.plane[plane].pos_x;
- gy1 = y + blizzard.plane[plane].pos_y;
- gx2 = gx1 + w;
- gy2 = gy1 + h;
-
- flags = req->par.update.flags;
- if (flags & OMAPFB_FORMAT_FLAG_DOUBLE) {
- gx1_out = gx1;
- gy1_out = gy1;
- gx2_out = gx1 + w * 2;
- gy2_out = gy1 + h * 2;
- } else {
- gx1_out = x_out + blizzard.plane[plane].pos_x;
- gy1_out = y_out + blizzard.plane[plane].pos_y;
- gx2_out = gx1_out + w_out;
- gy2_out = gy1_out + h_out;
- }
-
- for (i = 0; i < OMAPFB_PLANE_NUM; i++) {
- struct plane_info *p = &blizzard.plane[i];
- int px1, py1;
- int px2, py2;
- int pw, ph;
- int pposx, pposy;
- unsigned long offset;
-
- if (!(blizzard.enabled_planes & (1 << i)) ||
- (wnd_color_mode && i != plane)) {
- blizzard.int_ctrl->enable_plane(i, 0);
- continue;
- }
- /* Plane coordinates */
- if (i = plane) {
- /* Plane in which we are doing the update.
- * Local coordinates are the one in the update
- * request.
- */
- px1 = x;
- py1 = y;
- px2 = x + w;
- py2 = y + h;
- pposx = 0;
- pposy = 0;
- } else {
- /* Check if this plane has an overlapping part */
- px1 = gx1 - p->pos_x;
- py1 = gy1 - p->pos_y;
- px2 = gx2 - p->pos_x;
- py2 = gy2 - p->pos_y;
- if (px1 >= p->width || py1 >= p->height ||
- px2 <= 0 || py2 <= 0) {
- blizzard.int_ctrl->enable_plane(i, 0);
- continue;
- }
- /* Calculate the coordinates for the overlapping
- * part in the plane's local coordinates.
- */
- pposx = -px1;
- pposy = -py1;
- if (px1 < 0)
- px1 = 0;
- if (py1 < 0)
- py1 = 0;
- if (px2 > p->width)
- px2 = p->width;
- if (py2 > p->height)
- py2 = p->height;
- if (pposx < 0)
- pposx = 0;
- if (pposy < 0)
- pposy = 0;
- }
- pw = px2 - px1;
- ph = py2 - py1;
- offset = p->offset + (p->scr_width * py1 + px1) * p->bpp / 8;
- if (wnd_color_mode)
- /* Window embedded in the plane with a differing
- * color mode / bpp. Calculate the number of DMA
- * transfer elements in terms of the plane's bpp.
- */
- pw = (pw + 1) * bpp / p->bpp;
-#ifdef VERBOSE
- dev_dbg(blizzard.fbdev->dev,
- "plane %d offset %#08lx pposx %d pposy %d "
- "px1 %d py1 %d pw %d ph %d\n",
- i, offset, pposx, pposy, px1, py1, pw, ph);
-#endif
- blizzard.int_ctrl->setup_plane(i,
- OMAPFB_CHANNEL_OUT_LCD, offset,
- p->scr_width,
- pposx, pposy, pw, ph,
- p->color_mode);
-
- blizzard.int_ctrl->enable_plane(i, 1);
- }
-
- switch (wnd_color_mode) {
- case OMAPFB_COLOR_YUV420:
- color_mode = BLIZZARD_COLOR_YUV420;
- /* Currently only the 16 bits/pixel cycle format is
- * supported on the external interface. Adjust the number
- * of transfer elements per line for 12bpp format.
- */
- w = (w + 1) * 3 / 4;
- break;
- default:
- color_mode = BLIZZARD_COLOR_RGB565;
- break;
- }
-
- blizzard_wait_line_buffer();
- if (blizzard.last_color_mode = BLIZZARD_COLOR_YUV420)
- blizzard_wait_yyc();
- blizzard.last_color_mode = color_mode;
- if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC)
- enable_tearsync(gy1, w, h,
- blizzard.screen_height,
- h_out,
- flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC);
- else
- disable_tearsync();
-
- if ((gx2_out - gx1_out) != (gx2 - gx1) ||
- (gy2_out - gy1_out) != (gy2 - gy1))
- have_zoom_for_this_update = 1;
-
- /* 'background' type of screen update (as opposed to 'destructive')
- can be used to disable scaling if scaling is active */
- zoom_off = blizzard.zoom_on && !have_zoom_for_this_update &&
- (gx1_out = 0) && (gx2_out = blizzard.screen_width) &&
- (gy1_out = 0) && (gy2_out = blizzard.screen_height) &&
- (gx1 = 0) && (gy1 = 0);
-
- if (blizzard.zoom_on && !have_zoom_for_this_update && !zoom_off &&
- check_1d_intersect(blizzard.zoom_area_gx1, blizzard.zoom_area_gx2,
- gx1_out, gx2_out) &&
- check_1d_intersect(blizzard.zoom_area_gy1, blizzard.zoom_area_gy2,
- gy1_out, gy2_out)) {
- /* Previous screen update was using scaling, current update
- * is not using it. Additionally, current screen update is
- * going to overlap with the scaled area. Scaling needs to be
- * disabled in order to avoid 'magnifying glass' effect.
- * Dummy setup of background window can be used for this.
- */
- set_window_regs(0, 0, blizzard.screen_width,
- blizzard.screen_height,
- 0, 0, blizzard.screen_width,
- blizzard.screen_height,
- BLIZZARD_COLOR_RGB565, 1, flags);
- blizzard.zoom_on = 0;
- }
-
- /* remember scaling settings if we have scaled update */
- if (have_zoom_for_this_update) {
- blizzard.zoom_on = 1;
- blizzard.zoom_area_gx1 = gx1_out;
- blizzard.zoom_area_gx2 = gx2_out;
- blizzard.zoom_area_gy1 = gy1_out;
- blizzard.zoom_area_gy2 = gy2_out;
- }
-
- set_window_regs(gx1, gy1, gx2, gy2, gx1_out, gy1_out, gx2_out, gy2_out,
- color_mode, zoom_off, flags);
- if (zoom_off)
- blizzard.zoom_on = 0;
-
- blizzard.extif->set_bits_per_cycle(16);
- /* set_window_regs has left the register index at the right
- * place, so no need to set it here.
- */
- blizzard.extif->transfer_area(w, h, request_complete, req);
-
- return REQ_PENDING;
-}
-
-static int send_frame_handler(struct blizzard_request *req)
-{
- struct update_param *par = &req->par.update;
- int plane = par->plane;
-
-#ifdef VERBOSE
- dev_dbg(blizzard.fbdev->dev,
- "send_frame: x %d y %d w %d h %d "
- "x_out %d y_out %d w_out %d h_out %d "
- "color_mode %04x flags %04x planes %01x\n",
- par->x, par->y, par->width, par->height,
- par->out_x, par->out_y, par->out_width, par->out_height,
- par->color_mode, par->flags, blizzard.enabled_planes);
-#endif
- if (par->flags & OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY)
- disable_overlay();
-
- if ((blizzard.enabled_planes & blizzard.vid_nonstd_color) ||
- (blizzard.enabled_planes & blizzard.vid_scaled))
- return do_full_screen_update(req);
-
- return do_partial_update(req, plane, par->x, par->y,
- par->width, par->height,
- par->out_x, par->out_y,
- par->out_width, par->out_height,
- par->color_mode, par->bpp);
-}
-
-static void send_frame_complete(void *data)
-{
-}
-
-#define ADD_PREQ(_x, _y, _w, _h, _x_out, _y_out, _w_out, _h_out) do { \
- req = alloc_req(); \
- req->handler = send_frame_handler; \
- req->complete = send_frame_complete; \
- req->par.update.plane = plane_idx; \
- req->par.update.x = _x; \
- req->par.update.y = _y; \
- req->par.update.width = _w; \
- req->par.update.height = _h; \
- req->par.update.out_x = _x_out; \
- req->par.update.out_y = _y_out; \
- req->par.update.out_width = _w_out; \
- req->par.update.out_height = _h_out; \
- req->par.update.bpp = bpp; \
- req->par.update.color_mode = color_mode;\
- req->par.update.flags = flags; \
- list_add_tail(&req->entry, req_head); \
-} while(0)
-
-static void create_req_list(int plane_idx,
- struct omapfb_update_window *win,
- struct list_head *req_head)
-{
- struct blizzard_request *req;
- int x = win->x;
- int y = win->y;
- int width = win->width;
- int height = win->height;
- int x_out = win->out_x;
- int y_out = win->out_y;
- int width_out = win->out_width;
- int height_out = win->out_height;
- int color_mode;
- int bpp;
- int flags;
- unsigned int ystart = y;
- unsigned int yspan = height;
- unsigned int ystart_out = y_out;
- unsigned int yspan_out = height_out;
-
- flags = win->format & ~OMAPFB_FORMAT_MASK;
- color_mode = win->format & OMAPFB_FORMAT_MASK;
- switch (color_mode) {
- case OMAPFB_COLOR_YUV420:
- /* Embedded window with different color mode */
- bpp = 12;
- /* X, Y, height must be aligned at 2, width at 4 pixels */
- x &= ~1;
- y &= ~1;
- height = yspan = height & ~1;
- width = width & ~3;
- break;
- default:
- /* Same as the plane color mode */
- bpp = blizzard.plane[plane_idx].bpp;
- break;
- }
- if (width * height * bpp / 8 > blizzard.max_transmit_size) {
- yspan = blizzard.max_transmit_size / (width * bpp / 8);
- yspan_out = yspan * height_out / height;
- ADD_PREQ(x, ystart, width, yspan, x_out, ystart_out,
- width_out, yspan_out);
- ystart += yspan;
- ystart_out += yspan_out;
- yspan = height - yspan;
- yspan_out = height_out - yspan_out;
- flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
- }
-
- ADD_PREQ(x, ystart, width, yspan, x_out, ystart_out,
- width_out, yspan_out);
-}
-
-static void auto_update_complete(void *data)
-{
- if (!blizzard.stop_auto_update)
- mod_timer(&blizzard.auto_update_timer,
- jiffies + BLIZZARD_AUTO_UPDATE_TIME);
-}
-
-static void blizzard_update_window_auto(unsigned long arg)
-{
- LIST_HEAD(req_list);
- struct blizzard_request *last;
- struct omapfb_plane_struct *plane;
-
- plane = blizzard.fbdev->fb_info[0]->par;
- create_req_list(plane->idx,
- &blizzard.auto_update_window, &req_list);
- last = list_entry(req_list.prev, struct blizzard_request, entry);
-
- last->complete = auto_update_complete;
- last->complete_data = NULL;
-
- submit_req_list(&req_list);
-}
-
-int blizzard_update_window_async(struct fb_info *fbi,
- struct omapfb_update_window *win,
- void (*complete_callback)(void *arg),
- void *complete_callback_data)
-{
- LIST_HEAD(req_list);
- struct blizzard_request *last;
- struct omapfb_plane_struct *plane = fbi->par;
-
- if (unlikely(blizzard.update_mode != OMAPFB_MANUAL_UPDATE))
- return -EINVAL;
- if (unlikely(!blizzard.te_connected &&
- (win->format & OMAPFB_FORMAT_FLAG_TEARSYNC)))
- return -EINVAL;
-
- create_req_list(plane->idx, win, &req_list);
- last = list_entry(req_list.prev, struct blizzard_request, entry);
-
- last->complete = complete_callback;
- last->complete_data = (void *)complete_callback_data;
-
- submit_req_list(&req_list);
-
- return 0;
-}
-EXPORT_SYMBOL(blizzard_update_window_async);
-
-static int update_full_screen(void)
-{
- return blizzard_update_window_async(blizzard.fbdev->fb_info[0],
- &blizzard.auto_update_window, NULL, NULL);
-
-}
-
-static int blizzard_setup_plane(int plane, int channel_out,
- unsigned long offset, int screen_width,
- int pos_x, int pos_y, int width, int height,
- int color_mode)
-{
- struct plane_info *p;
-
-#ifdef VERBOSE
- dev_dbg(blizzard.fbdev->dev,
- "plane %d ch_out %d offset %#08lx scr_width %d "
- "pos_x %d pos_y %d width %d height %d color_mode %d\n",
- plane, channel_out, offset, screen_width,
- pos_x, pos_y, width, height, color_mode);
-#endif
- if ((unsigned)plane > OMAPFB_PLANE_NUM)
- return -EINVAL;
- p = &blizzard.plane[plane];
-
- switch (color_mode) {
- case OMAPFB_COLOR_YUV422:
- case OMAPFB_COLOR_YUY422:
- p->bpp = 16;
- blizzard.vid_nonstd_color &= ~(1 << plane);
- break;
- case OMAPFB_COLOR_YUV420:
- p->bpp = 12;
- blizzard.vid_nonstd_color |= 1 << plane;
- break;
- case OMAPFB_COLOR_RGB565:
- p->bpp = 16;
- blizzard.vid_nonstd_color &= ~(1 << plane);
- break;
- default:
- return -EINVAL;
- }
-
- p->offset = offset;
- p->pos_x = pos_x;
- p->pos_y = pos_y;
- p->width = width;
- p->height = height;
- p->scr_width = screen_width;
- if (!p->out_width)
- p->out_width = width;
- if (!p->out_height)
- p->out_height = height;
-
- p->color_mode = color_mode;
-
- return 0;
-}
-
-static int blizzard_set_scale(int plane, int orig_w, int orig_h,
- int out_w, int out_h)
-{
- struct plane_info *p = &blizzard.plane[plane];
- int r;
-
- dev_dbg(blizzard.fbdev->dev,
- "plane %d orig_w %d orig_h %d out_w %d out_h %d\n",
- plane, orig_w, orig_h, out_w, out_h);
- if ((unsigned)plane > OMAPFB_PLANE_NUM)
- return -ENODEV;
-
- r = blizzard.int_ctrl->set_scale(plane, orig_w, orig_h, out_w, out_h);
- if (r < 0)
- return r;
-
- p->width = orig_w;
- p->height = orig_h;
- p->out_width = out_w;
- p->out_height = out_h;
- if (orig_w = out_w && orig_h = out_h)
- blizzard.vid_scaled &= ~(1 << plane);
- else
- blizzard.vid_scaled |= 1 << plane;
-
- return 0;
-}
-
-static int blizzard_set_rotate(int angle)
-{
- u32 l;
-
- l = blizzard_read_reg(BLIZZARD_PANEL_CONFIGURATION);
- l &= ~0x03;
-
- switch (angle) {
- case 0:
- l = l | 0x00;
- break;
- case 90:
- l = l | 0x03;
- break;
- case 180:
- l = l | 0x02;
- break;
- case 270:
- l = l | 0x01;
- break;
- default:
- return -EINVAL;
- }
-
- blizzard_write_reg(BLIZZARD_PANEL_CONFIGURATION, l);
-
- return 0;
-}
-
-static int blizzard_enable_plane(int plane, int enable)
-{
- if (enable)
- blizzard.enabled_planes |= 1 << plane;
- else
- blizzard.enabled_planes &= ~(1 << plane);
-
- return 0;
-}
-
-static int sync_handler(struct blizzard_request *req)
-{
- complete(req->par.sync);
- return REQ_COMPLETE;
-}
-
-static void blizzard_sync(void)
-{
- LIST_HEAD(req_list);
- struct blizzard_request *req;
- struct completion comp;
-
- req = alloc_req();
-
- req->handler = sync_handler;
- req->complete = NULL;
- init_completion(&comp);
- req->par.sync = ∁
-
- list_add(&req->entry, &req_list);
- submit_req_list(&req_list);
-
- wait_for_completion(&comp);
-}
-
-
-static void blizzard_bind_client(struct omapfb_notifier_block *nb)
-{
- if (blizzard.update_mode = OMAPFB_MANUAL_UPDATE) {
- omapfb_notify_clients(blizzard.fbdev, OMAPFB_EVENT_READY);
- }
-}
-
-static int blizzard_set_update_mode(enum omapfb_update_mode mode)
-{
- if (unlikely(mode != OMAPFB_MANUAL_UPDATE &&
- mode != OMAPFB_AUTO_UPDATE &&
- mode != OMAPFB_UPDATE_DISABLED))
- return -EINVAL;
-
- if (mode = blizzard.update_mode)
- return 0;
-
- dev_info(blizzard.fbdev->dev, "s1d1374x: setting update mode to %s\n",
- mode = OMAPFB_UPDATE_DISABLED ? "disabled" :
- (mode = OMAPFB_AUTO_UPDATE ? "auto" : "manual"));
-
- switch (blizzard.update_mode) {
- case OMAPFB_MANUAL_UPDATE:
- omapfb_notify_clients(blizzard.fbdev, OMAPFB_EVENT_DISABLED);
- break;
- case OMAPFB_AUTO_UPDATE:
- blizzard.stop_auto_update = 1;
- del_timer_sync(&blizzard.auto_update_timer);
- break;
- case OMAPFB_UPDATE_DISABLED:
- break;
- }
-
- blizzard.update_mode = mode;
- blizzard_sync();
- blizzard.stop_auto_update = 0;
-
- switch (mode) {
- case OMAPFB_MANUAL_UPDATE:
- omapfb_notify_clients(blizzard.fbdev, OMAPFB_EVENT_READY);
- break;
- case OMAPFB_AUTO_UPDATE:
- blizzard_update_window_auto(0);
- break;
- case OMAPFB_UPDATE_DISABLED:
- break;
- }
-
- return 0;
-}
-
-static enum omapfb_update_mode blizzard_get_update_mode(void)
-{
- return blizzard.update_mode;
-}
-
-static inline void set_extif_timings(const struct extif_timings *t)
-{
- blizzard.extif->set_timings(t);
-}
-
-static inline unsigned long round_to_extif_ticks(unsigned long ps, int div)
-{
- int bus_tick = blizzard.extif_clk_period * div;
- return (ps + bus_tick - 1) / bus_tick * bus_tick;
-}
-
-static int calc_reg_timing(unsigned long sysclk, int div)
-{
- struct extif_timings *t;
- unsigned long systim;
-
- /* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
- * AccessTime 2 ns + 12.2 ns (regs),
- * WEOffTime = WEOnTime + 1 ns,
- * REOffTime = REOnTime + 12 ns (regs),
- * CSOffTime = REOffTime + 1 ns
- * ReadCycle = 2ns + 2*SYSCLK (regs),
- * WriteCycle = 2*SYSCLK + 2 ns,
- * CSPulseWidth = 10 ns */
-
- systim = 1000000000 / (sysclk / 1000);
- dev_dbg(blizzard.fbdev->dev,
- "Blizzard systim %lu ps extif_clk_period %u div %d\n",
- systim, blizzard.extif_clk_period, div);
-
- t = &blizzard.reg_timings;
- memset(t, 0, sizeof(*t));
-
- t->clk_div = div;
-
- t->cs_on_time = 0;
- t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
- t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
- t->access_time = round_to_extif_ticks(t->re_on_time + 12200, div);
- t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
- t->re_off_time = round_to_extif_ticks(t->re_on_time + 13000, div);
- t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
- t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
- if (t->we_cycle_time < t->we_off_time)
- t->we_cycle_time = t->we_off_time;
- t->re_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
- if (t->re_cycle_time < t->re_off_time)
- t->re_cycle_time = t->re_off_time;
- t->cs_pulse_width = 0;
-
- dev_dbg(blizzard.fbdev->dev, "[reg]cson %d csoff %d reon %d reoff %d\n",
- t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
- dev_dbg(blizzard.fbdev->dev, "[reg]weon %d weoff %d recyc %d wecyc %d\n",
- t->we_on_time, t->we_off_time, t->re_cycle_time,
- t->we_cycle_time);
- dev_dbg(blizzard.fbdev->dev, "[reg]rdaccess %d cspulse %d\n",
- t->access_time, t->cs_pulse_width);
-
- return blizzard.extif->convert_timings(t);
-}
-
-static int calc_lut_timing(unsigned long sysclk, int div)
-{
- struct extif_timings *t;
- unsigned long systim;
-
- /* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
- * AccessTime 2 ns + 4 * SYSCLK + 26 (lut),
- * WEOffTime = WEOnTime + 1 ns,
- * REOffTime = REOnTime + 4*SYSCLK + 26 ns (lut),
- * CSOffTime = REOffTime + 1 ns
- * ReadCycle = 2ns + 4*SYSCLK + 26 ns (lut),
- * WriteCycle = 2*SYSCLK + 2 ns,
- * CSPulseWidth = 10 ns */
-
- systim = 1000000000 / (sysclk / 1000);
- dev_dbg(blizzard.fbdev->dev,
- "Blizzard systim %lu ps extif_clk_period %u div %d\n",
- systim, blizzard.extif_clk_period, div);
-
- t = &blizzard.lut_timings;
- memset(t, 0, sizeof(*t));
-
- t->clk_div = div;
-
- t->cs_on_time = 0;
- t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
- t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
- t->access_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
- 26000, div);
- t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
- t->re_off_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
- 26000, div);
- t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
- t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
- if (t->we_cycle_time < t->we_off_time)
- t->we_cycle_time = t->we_off_time;
- t->re_cycle_time = round_to_extif_ticks(2000 + 4 * systim + 26000, div);
- if (t->re_cycle_time < t->re_off_time)
- t->re_cycle_time = t->re_off_time;
- t->cs_pulse_width = 0;
-
- dev_dbg(blizzard.fbdev->dev,
- "[lut]cson %d csoff %d reon %d reoff %d\n",
- t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
- dev_dbg(blizzard.fbdev->dev,
- "[lut]weon %d weoff %d recyc %d wecyc %d\n",
- t->we_on_time, t->we_off_time, t->re_cycle_time,
- t->we_cycle_time);
- dev_dbg(blizzard.fbdev->dev, "[lut]rdaccess %d cspulse %d\n",
- t->access_time, t->cs_pulse_width);
-
- return blizzard.extif->convert_timings(t);
-}
-
-static int calc_extif_timings(unsigned long sysclk, int *extif_mem_div)
-{
- int max_clk_div;
- int div;
-
- blizzard.extif->get_clk_info(&blizzard.extif_clk_period, &max_clk_div);
- for (div = 1; div <= max_clk_div; div++) {
- if (calc_reg_timing(sysclk, div) = 0)
- break;
- }
- if (div > max_clk_div) {
- dev_dbg(blizzard.fbdev->dev, "reg timing failed\n");
- goto err;
- }
- *extif_mem_div = div;
-
- for (div = 1; div <= max_clk_div; div++) {
- if (calc_lut_timing(sysclk, div) = 0)
- break;
- }
-
- if (div > max_clk_div)
- goto err;
-
- blizzard.extif_clk_div = div;
-
- return 0;
-err:
- dev_err(blizzard.fbdev->dev, "can't setup timings\n");
- return -1;
-}
-
-static void calc_blizzard_clk_rates(unsigned long ext_clk,
- unsigned long *sys_clk, unsigned long *pix_clk)
-{
- int pix_clk_src;
- int sys_div = 0, sys_mul = 0;
- int pix_div;
-
- pix_clk_src = blizzard_read_reg(BLIZZARD_CLK_SRC);
- pix_div = ((pix_clk_src >> 3) & 0x1f) + 1;
- if ((pix_clk_src & (0x3 << 1)) = 0) {
- /* Source is the PLL */
- sys_div = (blizzard_read_reg(BLIZZARD_PLL_DIV) & 0x3f) + 1;
- sys_mul = blizzard_read_reg(BLIZZARD_PLL_CLOCK_SYNTH_0);
- sys_mul |= ((blizzard_read_reg(BLIZZARD_PLL_CLOCK_SYNTH_1)
- & 0x0f) << 11);
- *sys_clk = ext_clk * sys_mul / sys_div;
- } else /* else source is ext clk, or oscillator */
- *sys_clk = ext_clk;
-
- *pix_clk = *sys_clk / pix_div; /* HZ */
- dev_dbg(blizzard.fbdev->dev,
- "ext_clk %ld pix_src %d pix_div %d sys_div %d sys_mul %d\n",
- ext_clk, pix_clk_src & (0x3 << 1), pix_div, sys_div, sys_mul);
- dev_dbg(blizzard.fbdev->dev, "sys_clk %ld pix_clk %ld\n",
- *sys_clk, *pix_clk);
-}
-
-static int setup_tearsync(unsigned long pix_clk, int extif_div)
-{
- int hdisp, vdisp;
- int hndp, vndp;
- int hsw, vsw;
- int hs, vs;
- int hs_pol_inv, vs_pol_inv;
- int use_hsvs, use_ndp;
- u8 b;
-
- hsw = blizzard_read_reg(BLIZZARD_HSW);
- vsw = blizzard_read_reg(BLIZZARD_VSW);
- hs_pol_inv = !(hsw & 0x80);
- vs_pol_inv = !(vsw & 0x80);
- hsw = hsw & 0x7f;
- vsw = vsw & 0x3f;
-
- hdisp = blizzard_read_reg(BLIZZARD_HDISP) * 8;
- vdisp = blizzard_read_reg(BLIZZARD_VDISP0) +
- ((blizzard_read_reg(BLIZZARD_VDISP1) & 0x3) << 8);
-
- hndp = blizzard_read_reg(BLIZZARD_HNDP) & 0x3f;
- vndp = blizzard_read_reg(BLIZZARD_VNDP);
-
- /* time to transfer one pixel (16bpp) in ps */
- blizzard.pix_tx_time = blizzard.reg_timings.we_cycle_time;
- if (blizzard.extif->get_max_tx_rate != NULL) {
- /* The external interface might have a rate limitation,
- * if so, we have to maximize our transfer rate.
- */
- unsigned long min_tx_time;
- unsigned long max_tx_rate = blizzard.extif->get_max_tx_rate();
-
- dev_dbg(blizzard.fbdev->dev, "max_tx_rate %ld HZ\n",
- max_tx_rate);
- min_tx_time = 1000000000 / (max_tx_rate / 1000); /* ps */
- if (blizzard.pix_tx_time < min_tx_time)
- blizzard.pix_tx_time = min_tx_time;
- }
-
- /* time to update one line in ps */
- blizzard.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000);
- blizzard.line_upd_time *= 1000;
- if (hdisp * blizzard.pix_tx_time > blizzard.line_upd_time)
- /* transfer speed too low, we might have to use both
- * HS and VS */
- use_hsvs = 1;
- else
- /* decent transfer speed, we'll always use only VS */
- use_hsvs = 0;
-
- if (use_hsvs && (hs_pol_inv || vs_pol_inv)) {
- /* HS or'ed with VS doesn't work, use the active high
- * TE signal based on HNDP / VNDP */
- use_ndp = 1;
- hs_pol_inv = 0;
- vs_pol_inv = 0;
- hs = hndp;
- vs = vndp;
- } else {
- /* Use HS or'ed with VS as a TE signal if both are needed
- * or VNDP if only vsync is needed. */
- use_ndp = 0;
- hs = hsw;
- vs = vsw;
- if (!use_hsvs) {
- hs_pol_inv = 0;
- vs_pol_inv = 0;
- }
- }
-
- hs = hs * 1000000 / (pix_clk / 1000); /* ps */
- hs *= 1000;
-
- vs = vs * (hdisp + hndp) * 1000000 / (pix_clk / 1000); /* ps */
- vs *= 1000;
-
- if (vs <= hs)
- return -EDOM;
- /* set VS to 120% of HS to minimize VS detection time */
- vs = hs * 12 / 10;
- /* minimize HS too */
- if (hs > 10000)
- hs = 10000;
-
- b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
- b &= ~0x3;
- b |= use_hsvs ? 1 : 0;
- b |= (use_ndp && use_hsvs) ? 0 : 2;
- blizzard_write_reg(BLIZZARD_NDISP_CTRL_STATUS, b);
-
- blizzard.vsync_only = !use_hsvs;
-
- dev_dbg(blizzard.fbdev->dev,
- "pix_clk %ld HZ pix_tx_time %ld ps line_upd_time %ld ps\n",
- pix_clk, blizzard.pix_tx_time, blizzard.line_upd_time);
- dev_dbg(blizzard.fbdev->dev,
- "hs %d ps vs %d ps mode %d vsync_only %d\n",
- hs, vs, b & 0x3, !use_hsvs);
-
- return blizzard.extif->setup_tearsync(1, hs, vs,
- hs_pol_inv, vs_pol_inv,
- extif_div);
-}
-
-static void blizzard_get_caps(int plane, struct omapfb_caps *caps)
-{
- blizzard.int_ctrl->get_caps(plane, caps);
- caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE |
- OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE |
- OMAPFB_CAPS_WINDOW_SCALE |
- OMAPFB_CAPS_WINDOW_OVERLAY |
- OMAPFB_CAPS_WINDOW_ROTATE;
- if (blizzard.te_connected)
- caps->ctrl |= OMAPFB_CAPS_TEARSYNC;
- caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) |
- (1 << OMAPFB_COLOR_YUV420);
-}
-
-static void _save_regs(const struct blizzard_reg_list *list, int cnt)
-{
- int i;
-
- for (i = 0; i < cnt; i++, list++) {
- int reg;
- for (reg = list->start; reg <= list->end; reg += 2)
- blizzard_reg_cache[reg / 2] = blizzard_read_reg(reg);
- }
-}
-
-static void _restore_regs(const struct blizzard_reg_list *list, int cnt)
-{
- int i;
-
- for (i = 0; i < cnt; i++, list++) {
- int reg;
- for (reg = list->start; reg <= list->end; reg += 2)
- blizzard_write_reg(reg, blizzard_reg_cache[reg / 2]);
- }
-}
-
-static void blizzard_save_all_regs(void)
-{
- _save_regs(blizzard_pll_regs, ARRAY_SIZE(blizzard_pll_regs));
- _save_regs(blizzard_gen_regs, ARRAY_SIZE(blizzard_gen_regs));
-}
-
-static void blizzard_restore_pll_regs(void)
-{
- _restore_regs(blizzard_pll_regs, ARRAY_SIZE(blizzard_pll_regs));
-}
-
-static void blizzard_restore_gen_regs(void)
-{
- _restore_regs(blizzard_gen_regs, ARRAY_SIZE(blizzard_gen_regs));
-}
-
-static void blizzard_suspend(void)
-{
- u32 l;
- unsigned long tmo;
-
- if (blizzard.last_color_mode) {
- update_full_screen();
- blizzard_sync();
- }
- blizzard.update_mode_before_suspend = blizzard.update_mode;
- /* the following will disable clocks as well */
- blizzard_set_update_mode(OMAPFB_UPDATE_DISABLED);
-
- blizzard_save_all_regs();
-
- blizzard_stop_sdram();
-
- l = blizzard_read_reg(BLIZZARD_POWER_SAVE);
- /* Standby, Sleep. We assume we use an external clock. */
- l |= 0x03;
- blizzard_write_reg(BLIZZARD_POWER_SAVE, l);
-
- tmo = jiffies + msecs_to_jiffies(100);
- while (!(blizzard_read_reg(BLIZZARD_PLL_MODE) & (1 << 1))) {
- if (time_after(jiffies, tmo)) {
- dev_err(blizzard.fbdev->dev,
- "s1d1374x: sleep timeout, stopping PLL manually\n");
- l = blizzard_read_reg(BLIZZARD_PLL_MODE);
- l &= ~0x03;
- /* Disable PLL, counter function */
- l |= 0x2;
- blizzard_write_reg(BLIZZARD_PLL_MODE, l);
- break;
- }
- msleep(1);
- }
-
- if (blizzard.power_down != NULL)
- blizzard.power_down(blizzard.fbdev->dev);
-}
-
-static void blizzard_resume(void)
-{
- u32 l;
-
- if (blizzard.power_up != NULL)
- blizzard.power_up(blizzard.fbdev->dev);
-
- l = blizzard_read_reg(BLIZZARD_POWER_SAVE);
- /* Standby, Sleep */
- l &= ~0x03;
- blizzard_write_reg(BLIZZARD_POWER_SAVE, l);
-
- blizzard_restore_pll_regs();
- l = blizzard_read_reg(BLIZZARD_PLL_MODE);
- l &= ~0x03;
- /* Enable PLL, counter function */
- l |= 0x1;
- blizzard_write_reg(BLIZZARD_PLL_MODE, l);
-
- while (!(blizzard_read_reg(BLIZZARD_PLL_DIV) & (1 << 7)))
- msleep(1);
-
- blizzard_restart_sdram();
-
- blizzard_restore_gen_regs();
-
- /* Enable display */
- blizzard_write_reg(BLIZZARD_DISPLAY_MODE, 0x01);
-
- /* the following will enable clocks as necessary */
- blizzard_set_update_mode(blizzard.update_mode_before_suspend);
-
- /* Force a background update */
- blizzard.zoom_on = 1;
- update_full_screen();
- blizzard_sync();
-}
-
-static int blizzard_init(struct omapfb_device *fbdev, int ext_mode,
- struct omapfb_mem_desc *req_vram)
-{
- int r = 0, i;
- u8 rev, conf;
- unsigned long ext_clk;
- int extif_div;
- unsigned long sys_clk, pix_clk;
- struct omapfb_platform_data *omapfb_conf;
- struct blizzard_platform_data *ctrl_conf;
-
- blizzard.fbdev = fbdev;
-
- BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl);
-
- blizzard.fbdev = fbdev;
- blizzard.extif = fbdev->ext_if;
- blizzard.int_ctrl = fbdev->int_ctrl;
-
- omapfb_conf = fbdev->dev->platform_data;
- ctrl_conf = omapfb_conf->ctrl_platform_data;
- if (ctrl_conf = NULL || ctrl_conf->get_clock_rate = NULL) {
- dev_err(fbdev->dev, "s1d1374x: missing platform data\n");
- r = -ENOENT;
- goto err1;
- }
-
- blizzard.power_down = ctrl_conf->power_down;
- blizzard.power_up = ctrl_conf->power_up;
-
- spin_lock_init(&blizzard.req_lock);
-
- if ((r = blizzard.int_ctrl->init(fbdev, 1, req_vram)) < 0)
- goto err1;
-
- if ((r = blizzard.extif->init(fbdev)) < 0)
- goto err2;
-
- blizzard_ctrl.set_color_key = blizzard.int_ctrl->set_color_key;
- blizzard_ctrl.get_color_key = blizzard.int_ctrl->get_color_key;
- blizzard_ctrl.setup_mem = blizzard.int_ctrl->setup_mem;
- blizzard_ctrl.mmap = blizzard.int_ctrl->mmap;
-
- ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
- if ((r = calc_extif_timings(ext_clk, &extif_div)) < 0)
- goto err3;
-
- set_extif_timings(&blizzard.reg_timings);
-
- if (blizzard.power_up != NULL)
- blizzard.power_up(fbdev->dev);
-
- calc_blizzard_clk_rates(ext_clk, &sys_clk, &pix_clk);
-
- if ((r = calc_extif_timings(sys_clk, &extif_div)) < 0)
- goto err3;
- set_extif_timings(&blizzard.reg_timings);
-
- if (!(blizzard_read_reg(BLIZZARD_PLL_DIV) & 0x80)) {
- dev_err(fbdev->dev,
- "controller not initialized by the bootloader\n");
- r = -ENODEV;
- goto err3;
- }
-
- if (ctrl_conf->te_connected) {
- if ((r = setup_tearsync(pix_clk, extif_div)) < 0)
- goto err3;
- blizzard.te_connected = 1;
- }
-
- rev = blizzard_read_reg(BLIZZARD_REV_CODE);
- conf = blizzard_read_reg(BLIZZARD_CONFIG);
-
- switch (rev & 0xfc) {
- case 0x9c:
- blizzard.version = BLIZZARD_VERSION_S1D13744;
- pr_info("omapfb: s1d13744 LCD controller rev %d "
- "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
- break;
- case 0xa4:
- blizzard.version = BLIZZARD_VERSION_S1D13745;
- pr_info("omapfb: s1d13745 LCD controller rev %d "
- "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
- break;
- default:
- dev_err(fbdev->dev, "invalid s1d1374x revision %02x\n",
- rev);
- r = -ENODEV;
- goto err3;
- }
-
- blizzard.max_transmit_size = blizzard.extif->max_transmit_size;
-
- blizzard.update_mode = OMAPFB_UPDATE_DISABLED;
-
- blizzard.auto_update_window.x = 0;
- blizzard.auto_update_window.y = 0;
- blizzard.auto_update_window.width = fbdev->panel->x_res;
- blizzard.auto_update_window.height = fbdev->panel->y_res;
- blizzard.auto_update_window.out_x = 0;
- blizzard.auto_update_window.out_y = 0;
- blizzard.auto_update_window.out_width = fbdev->panel->x_res;
- blizzard.auto_update_window.out_height = fbdev->panel->y_res;
- blizzard.auto_update_window.format = 0;
-
- blizzard.screen_width = fbdev->panel->x_res;
- blizzard.screen_height = fbdev->panel->y_res;
-
- init_timer(&blizzard.auto_update_timer);
- blizzard.auto_update_timer.function = blizzard_update_window_auto;
- blizzard.auto_update_timer.data = 0;
-
- INIT_LIST_HEAD(&blizzard.free_req_list);
- INIT_LIST_HEAD(&blizzard.pending_req_list);
- for (i = 0; i < ARRAY_SIZE(blizzard.req_pool); i++)
- list_add(&blizzard.req_pool[i].entry, &blizzard.free_req_list);
- BUG_ON(i <= IRQ_REQ_POOL_SIZE);
- sema_init(&blizzard.req_sema, i - IRQ_REQ_POOL_SIZE);
-
- return 0;
-err3:
- if (blizzard.power_down != NULL)
- blizzard.power_down(fbdev->dev);
- blizzard.extif->cleanup();
-err2:
- blizzard.int_ctrl->cleanup();
-err1:
- return r;
-}
-
-static void blizzard_cleanup(void)
-{
- blizzard_set_update_mode(OMAPFB_UPDATE_DISABLED);
- blizzard.extif->cleanup();
- blizzard.int_ctrl->cleanup();
- if (blizzard.power_down != NULL)
- blizzard.power_down(blizzard.fbdev->dev);
-}
-
-struct lcd_ctrl blizzard_ctrl = {
- .name = "blizzard",
- .init = blizzard_init,
- .cleanup = blizzard_cleanup,
- .bind_client = blizzard_bind_client,
- .get_caps = blizzard_get_caps,
- .set_update_mode = blizzard_set_update_mode,
- .get_update_mode = blizzard_get_update_mode,
- .setup_plane = blizzard_setup_plane,
- .set_scale = blizzard_set_scale,
- .enable_plane = blizzard_enable_plane,
- .set_rotate = blizzard_set_rotate,
- .update_window = blizzard_update_window_async,
- .sync = blizzard_sync,
- .suspend = blizzard_suspend,
- .resume = blizzard_resume,
-};
-
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index b291bfa..440a5dd 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -104,7 +104,6 @@ static struct platform_device omapdss_device = {
* ---------------------------------------------------------------------------
*/
extern struct lcd_ctrl hwa742_ctrl;
-extern struct lcd_ctrl blizzard_ctrl;
static const struct lcd_ctrl *ctrls[] = {
#ifdef CONFIG_ARCH_OMAP1
@@ -116,9 +115,6 @@ static const struct lcd_ctrl *ctrls[] = {
#ifdef CONFIG_FB_OMAP_LCDC_HWA742
&hwa742_ctrl,
#endif
-#ifdef CONFIG_FB_OMAP_LCDC_BLIZZARD
- &blizzard_ctrl,
-#endif
};
#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
--
1.7.4.1
^ permalink raw reply related
* =?UTF-8?q?=5BPATCH=2002/16=5D=20OMAPFB=3A=20Remove=20OMAP2/3=20support=20from=20old=20omapfb=20drive
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/Kconfig | 9 +-
drivers/video/omap/Makefile | 5 +-
drivers/video/omap/dispc.c | 1547 --------------------------------------
drivers/video/omap/dispc.h | 46 --
drivers/video/omap/omapfb.h | 4 -
drivers/video/omap/omapfb_main.c | 16 -
drivers/video/omap/rfbi.c | 598 ---------------
7 files changed, 5 insertions(+), 2220 deletions(-)
delete mode 100644 drivers/video/omap/dispc.c
delete mode 100644 drivers/video/omap/dispc.h
delete mode 100644 drivers/video/omap/rfbi.c
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index ab234d5..1e7536d 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,11 +1,10 @@
config FB_OMAP
tristate "OMAP frame buffer support (EXPERIMENTAL)"
- depends on FB && (OMAP2_DSS = "n")
- depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
+ depends on FB
+ depends on ARCH_OMAP1
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select TWL4030_CORE if MACH_OMAP_2430SDP
help
Frame buffer driver for OMAP based boards.
@@ -42,7 +41,7 @@ config FB_OMAP_LCD_MIPID
config FB_OMAP_BOOTLOADER_INIT
bool "Check bootloader initialization"
- depends on FB_OMAP || FB_OMAP2
+ depends on FB_OMAP
help
Say Y here if you want to enable checking if the bootloader has
already initialized the display controller. In this case the
@@ -61,7 +60,7 @@ config FB_OMAP_CONSISTENT_DMA_SIZE
config FB_OMAP_DMA_TUNE
bool "Set DMA SDRAM access priority high"
- depends on FB_OMAP && ARCH_OMAP1
+ depends on FB_OMAP
help
On systems in which video memory is in system memory
(SDRAM) this will speed up graphics DMA operations.
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 7042a4a..7965375 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -1,5 +1,5 @@
#
-# Makefile for the new OMAP framebuffer device driver
+# Makefile for the OMAP1 framebuffer device driver
#
obj-$(CONFIG_FB_OMAP) += omapfb.o
@@ -7,11 +7,8 @@ obj-$(CONFIG_FB_OMAP) += omapfb.o
objs-yy := omapfb_main.o
objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
-objs-y$(CONFIG_ARCH_OMAP2) += dispc.o
-objs-y$(CONFIG_ARCH_OMAP3) += dispc.o
objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
-objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
deleted file mode 100644
index 6f61e78..0000000
--- a/drivers/video/omap/dispc.c
+++ /dev/null
@@ -1,1547 +0,0 @@
-/*
- * OMAP2 display controller support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <plat/sram.h>
-#include <plat/board.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-#define MODULE_NAME "dispc"
-
-#define DSS_BASE 0x48050000
-#define DSS_SYSCONFIG 0x0010
-
-#define DISPC_BASE 0x48050400
-
-/* DISPC common */
-#define DISPC_REVISION 0x0000
-#define DISPC_SYSCONFIG 0x0010
-#define DISPC_SYSSTATUS 0x0014
-#define DISPC_IRQSTATUS 0x0018
-#define DISPC_IRQENABLE 0x001C
-#define DISPC_CONTROL 0x0040
-#define DISPC_CONFIG 0x0044
-#define DISPC_CAPABLE 0x0048
-#define DISPC_DEFAULT_COLOR0 0x004C
-#define DISPC_DEFAULT_COLOR1 0x0050
-#define DISPC_TRANS_COLOR0 0x0054
-#define DISPC_TRANS_COLOR1 0x0058
-#define DISPC_LINE_STATUS 0x005C
-#define DISPC_LINE_NUMBER 0x0060
-#define DISPC_TIMING_H 0x0064
-#define DISPC_TIMING_V 0x0068
-#define DISPC_POL_FREQ 0x006C
-#define DISPC_DIVISOR 0x0070
-#define DISPC_SIZE_DIG 0x0078
-#define DISPC_SIZE_LCD 0x007C
-
-#define DISPC_DATA_CYCLE1 0x01D4
-#define DISPC_DATA_CYCLE2 0x01D8
-#define DISPC_DATA_CYCLE3 0x01DC
-
-/* DISPC GFX plane */
-#define DISPC_GFX_BA0 0x0080
-#define DISPC_GFX_BA1 0x0084
-#define DISPC_GFX_POSITION 0x0088
-#define DISPC_GFX_SIZE 0x008C
-#define DISPC_GFX_ATTRIBUTES 0x00A0
-#define DISPC_GFX_FIFO_THRESHOLD 0x00A4
-#define DISPC_GFX_FIFO_SIZE_STATUS 0x00A8
-#define DISPC_GFX_ROW_INC 0x00AC
-#define DISPC_GFX_PIXEL_INC 0x00B0
-#define DISPC_GFX_WINDOW_SKIP 0x00B4
-#define DISPC_GFX_TABLE_BA 0x00B8
-
-/* DISPC Video plane 1/2 */
-#define DISPC_VID1_BASE 0x00BC
-#define DISPC_VID2_BASE 0x014C
-
-/* Offsets into DISPC_VID1/2_BASE */
-#define DISPC_VID_BA0 0x0000
-#define DISPC_VID_BA1 0x0004
-#define DISPC_VID_POSITION 0x0008
-#define DISPC_VID_SIZE 0x000C
-#define DISPC_VID_ATTRIBUTES 0x0010
-#define DISPC_VID_FIFO_THRESHOLD 0x0014
-#define DISPC_VID_FIFO_SIZE_STATUS 0x0018
-#define DISPC_VID_ROW_INC 0x001C
-#define DISPC_VID_PIXEL_INC 0x0020
-#define DISPC_VID_FIR 0x0024
-#define DISPC_VID_PICTURE_SIZE 0x0028
-#define DISPC_VID_ACCU0 0x002C
-#define DISPC_VID_ACCU1 0x0030
-
-/* 8 elements in 8 byte increments */
-#define DISPC_VID_FIR_COEF_H0 0x0034
-/* 8 elements in 8 byte increments */
-#define DISPC_VID_FIR_COEF_HV0 0x0038
-/* 5 elements in 4 byte increments */
-#define DISPC_VID_CONV_COEF0 0x0074
-
-#define DISPC_IRQ_FRAMEMASK 0x0001
-#define DISPC_IRQ_VSYNC 0x0002
-#define DISPC_IRQ_EVSYNC_EVEN 0x0004
-#define DISPC_IRQ_EVSYNC_ODD 0x0008
-#define DISPC_IRQ_ACBIAS_COUNT_STAT 0x0010
-#define DISPC_IRQ_PROG_LINE_NUM 0x0020
-#define DISPC_IRQ_GFX_FIFO_UNDERFLOW 0x0040
-#define DISPC_IRQ_GFX_END_WIN 0x0080
-#define DISPC_IRQ_PAL_GAMMA_MASK 0x0100
-#define DISPC_IRQ_OCP_ERR 0x0200
-#define DISPC_IRQ_VID1_FIFO_UNDERFLOW 0x0400
-#define DISPC_IRQ_VID1_END_WIN 0x0800
-#define DISPC_IRQ_VID2_FIFO_UNDERFLOW 0x1000
-#define DISPC_IRQ_VID2_END_WIN 0x2000
-#define DISPC_IRQ_SYNC_LOST 0x4000
-
-#define DISPC_IRQ_MASK_ALL 0x7fff
-
-#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
- DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
- DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
- DISPC_IRQ_SYNC_LOST)
-
-#define RFBI_CONTROL 0x48050040
-
-#define MAX_PALETTE_SIZE (256 * 16)
-
-#define FLD_MASK(pos, len) (((1 << len) - 1) << pos)
-
-#define MOD_REG_FLD(reg, mask, val) \
- dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val));
-
-#define OMAP2_SRAM_START 0x40200000
-/* Maximum size, in reality this is smaller if SRAM is partially locked. */
-#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */
-
-/* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */
-#define DISPC_MEMTYPE_NUM 2
-
-#define RESMAP_SIZE(_page_cnt) \
- ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
-#define RESMAP_PTR(_res_map, _page_nr) \
- (((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
-#define RESMAP_MASK(_page_nr) \
- (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
-
-struct resmap {
- unsigned long start;
- unsigned page_cnt;
- unsigned long *map;
-};
-
-#define MAX_IRQ_HANDLERS 4
-
-static struct {
- void __iomem *base;
-
- struct omapfb_mem_desc mem_desc;
- struct resmap *res_map[DISPC_MEMTYPE_NUM];
- atomic_t map_count[OMAPFB_PLANE_NUM];
-
- dma_addr_t palette_paddr;
- void *palette_vaddr;
-
- int ext_mode;
-
- struct {
- u32 irq_mask;
- void (*callback)(void *);
- void *data;
- } irq_handlers[MAX_IRQ_HANDLERS];
- struct completion frame_done;
-
- int fir_hinc[OMAPFB_PLANE_NUM];
- int fir_vinc[OMAPFB_PLANE_NUM];
-
- struct clk *dss_ick, *dss1_fck;
- struct clk *dss_54m_fck;
-
- enum omapfb_update_mode update_mode;
- struct omapfb_device *fbdev;
-
- struct omapfb_color_key color_key;
-} dispc;
-
-static void enable_lcd_clocks(int enable);
-
-static void inline dispc_write_reg(int idx, u32 val)
-{
- __raw_writel(val, dispc.base + idx);
-}
-
-static u32 inline dispc_read_reg(int idx)
-{
- u32 l = __raw_readl(dispc.base + idx);
- return l;
-}
-
-/* Select RFBI or bypass mode */
-static void enable_rfbi_mode(int enable)
-{
- void __iomem *rfbi_control;
- u32 l;
-
- l = dispc_read_reg(DISPC_CONTROL);
- /* Enable RFBI, GPIO0/1 */
- l &= ~((1 << 11) | (1 << 15) | (1 << 16));
- l |= enable ? (1 << 11) : 0;
- /* RFBI En: GPIO0/1\x10 RFBI Dis: GPIO0/1\x11 */
- l |= 1 << 15;
- l |= enable ? 0 : (1 << 16);
- dispc_write_reg(DISPC_CONTROL, l);
-
- /* Set bypass mode in RFBI module */
- rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
- if (!rfbi_control) {
- pr_err("Unable to ioremap rfbi_control\n");
- return;
- }
- l = __raw_readl(rfbi_control);
- l |= enable ? 0 : (1 << 1);
- __raw_writel(l, rfbi_control);
- iounmap(rfbi_control);
-}
-
-static void set_lcd_data_lines(int data_lines)
-{
- u32 l;
- int code = 0;
-
- switch (data_lines) {
- case 12:
- code = 0;
- break;
- case 16:
- code = 1;
- break;
- case 18:
- code = 2;
- break;
- case 24:
- code = 3;
- break;
- default:
- BUG();
- }
-
- l = dispc_read_reg(DISPC_CONTROL);
- l &= ~(0x03 << 8);
- l |= code << 8;
- dispc_write_reg(DISPC_CONTROL, l);
-}
-
-static void set_load_mode(int mode)
-{
- BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY |
- DISPC_LOAD_CLUT_ONCE_FRAME));
- MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1);
-}
-
-void omap_dispc_set_lcd_size(int x, int y)
-{
- BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
- enable_lcd_clocks(1);
- MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11),
- ((y - 1) << 16) | (x - 1));
- enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_set_lcd_size);
-
-void omap_dispc_set_digit_size(int x, int y)
-{
- BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
- enable_lcd_clocks(1);
- MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11),
- ((y - 1) << 16) | (x - 1));
- enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_set_digit_size);
-
-static void setup_plane_fifo(int plane, int ext_mode)
-{
- const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
- DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD,
- DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD };
- const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
- DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS,
- DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS };
- int low, high;
- u32 l;
-
- BUG_ON(plane > 2);
-
- l = dispc_read_reg(fsz_reg[plane]);
- l &= FLD_MASK(0, 11);
- if (ext_mode) {
- low = l * 3 / 4;
- high = l;
- } else {
- low = l / 4;
- high = l * 3 / 4;
- }
- MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 12) | FLD_MASK(0, 12),
- (high << 16) | low);
-}
-
-void omap_dispc_enable_lcd_out(int enable)
-{
- enable_lcd_clocks(1);
- MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0);
- enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_enable_lcd_out);
-
-void omap_dispc_enable_digit_out(int enable)
-{
- enable_lcd_clocks(1);
- MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0);
- enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_enable_digit_out);
-
-static inline int _setup_plane(int plane, int channel_out,
- u32 paddr, int screen_width,
- int pos_x, int pos_y, int width, int height,
- int color_mode)
-{
- const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
- DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
- DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
- const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0,
- DISPC_VID2_BASE + DISPC_VID_BA0 };
- const u32 ps_reg[] = { DISPC_GFX_POSITION,
- DISPC_VID1_BASE + DISPC_VID_POSITION,
- DISPC_VID2_BASE + DISPC_VID_POSITION };
- const u32 sz_reg[] = { DISPC_GFX_SIZE,
- DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE,
- DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE };
- const u32 ri_reg[] = { DISPC_GFX_ROW_INC,
- DISPC_VID1_BASE + DISPC_VID_ROW_INC,
- DISPC_VID2_BASE + DISPC_VID_ROW_INC };
- const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
- DISPC_VID2_BASE + DISPC_VID_SIZE };
-
- int chout_shift, burst_shift;
- int chout_val;
- int color_code;
- int bpp;
- int cconv_en;
- int set_vsize;
- u32 l;
-
-#ifdef VERBOSE
- dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d"
- " pos_x %d pos_y %d width %d height %d color_mode %d\n",
- plane, channel_out, paddr, screen_width, pos_x, pos_y,
- width, height, color_mode);
-#endif
-
- set_vsize = 0;
- switch (plane) {
- case OMAPFB_PLANE_GFX:
- burst_shift = 6;
- chout_shift = 8;
- break;
- case OMAPFB_PLANE_VID1:
- case OMAPFB_PLANE_VID2:
- burst_shift = 14;
- chout_shift = 16;
- set_vsize = 1;
- break;
- default:
- return -EINVAL;
- }
-
- switch (channel_out) {
- case OMAPFB_CHANNEL_OUT_LCD:
- chout_val = 0;
- break;
- case OMAPFB_CHANNEL_OUT_DIGIT:
- chout_val = 1;
- break;
- default:
- return -EINVAL;
- }
-
- cconv_en = 0;
- switch (color_mode) {
- case OMAPFB_COLOR_RGB565:
- color_code = DISPC_RGB_16_BPP;
- bpp = 16;
- break;
- case OMAPFB_COLOR_YUV422:
- if (plane = 0)
- return -EINVAL;
- color_code = DISPC_UYVY_422;
- cconv_en = 1;
- bpp = 16;
- break;
- case OMAPFB_COLOR_YUY422:
- if (plane = 0)
- return -EINVAL;
- color_code = DISPC_YUV2_422;
- cconv_en = 1;
- bpp = 16;
- break;
- default:
- return -EINVAL;
- }
-
- l = dispc_read_reg(at_reg[plane]);
-
- l &= ~(0x0f << 1);
- l |= color_code << 1;
- l &= ~(1 << 9);
- l |= cconv_en << 9;
-
- l &= ~(0x03 << burst_shift);
- l |= DISPC_BURST_8x32 << burst_shift;
-
- l &= ~(1 << chout_shift);
- l |= chout_val << chout_shift;
-
- dispc_write_reg(at_reg[plane], l);
-
- dispc_write_reg(ba_reg[plane], paddr);
- MOD_REG_FLD(ps_reg[plane],
- FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x);
-
- MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11),
- ((height - 1) << 16) | (width - 1));
-
- if (set_vsize) {
- /* Set video size if set_scale hasn't set it */
- if (!dispc.fir_vinc[plane])
- MOD_REG_FLD(vs_reg[plane],
- FLD_MASK(16, 11), (height - 1) << 16);
- if (!dispc.fir_hinc[plane])
- MOD_REG_FLD(vs_reg[plane],
- FLD_MASK(0, 11), width - 1);
- }
-
- dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
-
- return height * screen_width * bpp / 8;
-}
-
-static int omap_dispc_setup_plane(int plane, int channel_out,
- unsigned long offset,
- int screen_width,
- int pos_x, int pos_y, int width, int height,
- int color_mode)
-{
- u32 paddr;
- int r;
-
- if ((unsigned)plane > dispc.mem_desc.region_cnt)
- return -EINVAL;
- paddr = dispc.mem_desc.region[plane].paddr + offset;
- enable_lcd_clocks(1);
- r = _setup_plane(plane, channel_out, paddr,
- screen_width,
- pos_x, pos_y, width, height, color_mode);
- enable_lcd_clocks(0);
- return r;
-}
-
-static void write_firh_reg(int plane, int reg, u32 value)
-{
- u32 base;
-
- if (plane = 1)
- base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0;
- else
- base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0;
- dispc_write_reg(base + reg * 8, value);
-}
-
-static void write_firhv_reg(int plane, int reg, u32 value)
-{
- u32 base;
-
- if (plane = 1)
- base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0;
- else
- base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0;
- dispc_write_reg(base + reg * 8, value);
-}
-
-static void set_upsampling_coef_table(int plane)
-{
- const u32 coef[][2] = {
- { 0x00800000, 0x00800000 },
- { 0x0D7CF800, 0x037B02FF },
- { 0x1E70F5FF, 0x0C6F05FE },
- { 0x335FF5FE, 0x205907FB },
- { 0xF74949F7, 0x00404000 },
- { 0xF55F33FB, 0x075920FE },
- { 0xF5701EFE, 0x056F0CFF },
- { 0xF87C0DFF, 0x027B0300 },
- };
- int i;
-
- for (i = 0; i < 8; i++) {
- write_firh_reg(plane, i, coef[i][0]);
- write_firhv_reg(plane, i, coef[i][1]);
- }
-}
-
-static int omap_dispc_set_scale(int plane,
- int orig_width, int orig_height,
- int out_width, int out_height)
-{
- const u32 at_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
- DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
- const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
- DISPC_VID2_BASE + DISPC_VID_SIZE };
- const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR,
- DISPC_VID2_BASE + DISPC_VID_FIR };
-
- u32 l;
- int fir_hinc;
- int fir_vinc;
-
- if ((unsigned)plane > OMAPFB_PLANE_NUM)
- return -ENODEV;
-
- if (plane = OMAPFB_PLANE_GFX &&
- (out_width != orig_width || out_height != orig_height))
- return -EINVAL;
-
- enable_lcd_clocks(1);
- if (orig_width < out_width) {
- /*
- * Upsampling.
- * Currently you can only scale both dimensions in one way.
- */
- if (orig_height > out_height ||
- orig_width * 8 < out_width ||
- orig_height * 8 < out_height) {
- enable_lcd_clocks(0);
- return -EINVAL;
- }
- set_upsampling_coef_table(plane);
- } else if (orig_width > out_width) {
- /* Downsampling not yet supported
- */
-
- enable_lcd_clocks(0);
- return -EINVAL;
- }
- if (!orig_width || orig_width = out_width)
- fir_hinc = 0;
- else
- fir_hinc = 1024 * orig_width / out_width;
- if (!orig_height || orig_height = out_height)
- fir_vinc = 0;
- else
- fir_vinc = 1024 * orig_height / out_height;
- dispc.fir_hinc[plane] = fir_hinc;
- dispc.fir_vinc[plane] = fir_vinc;
-
- MOD_REG_FLD(fir_reg[plane],
- FLD_MASK(16, 12) | FLD_MASK(0, 12),
- ((fir_vinc & 4095) << 16) |
- (fir_hinc & 4095));
-
- dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
- "orig_height %d fir_hinc %d fir_vinc %d\n",
- out_width, out_height, orig_width, orig_height,
- fir_hinc, fir_vinc);
-
- MOD_REG_FLD(vs_reg[plane],
- FLD_MASK(16, 11) | FLD_MASK(0, 11),
- ((out_height - 1) << 16) | (out_width - 1));
-
- l = dispc_read_reg(at_reg[plane]);
- l &= ~(0x03 << 5);
- l |= fir_hinc ? (1 << 5) : 0;
- l |= fir_vinc ? (1 << 6) : 0;
- dispc_write_reg(at_reg[plane], l);
-
- enable_lcd_clocks(0);
- return 0;
-}
-
-static int omap_dispc_enable_plane(int plane, int enable)
-{
- const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
- DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
- DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
- if ((unsigned int)plane > dispc.mem_desc.region_cnt)
- return -EINVAL;
-
- enable_lcd_clocks(1);
- MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0);
- enable_lcd_clocks(0);
-
- return 0;
-}
-
-static int omap_dispc_set_color_key(struct omapfb_color_key *ck)
-{
- u32 df_reg, tr_reg;
- int shift, val;
-
- switch (ck->channel_out) {
- case OMAPFB_CHANNEL_OUT_LCD:
- df_reg = DISPC_DEFAULT_COLOR0;
- tr_reg = DISPC_TRANS_COLOR0;
- shift = 10;
- break;
- case OMAPFB_CHANNEL_OUT_DIGIT:
- df_reg = DISPC_DEFAULT_COLOR1;
- tr_reg = DISPC_TRANS_COLOR1;
- shift = 12;
- break;
- default:
- return -EINVAL;
- }
- switch (ck->key_type) {
- case OMAPFB_COLOR_KEY_DISABLED:
- val = 0;
- break;
- case OMAPFB_COLOR_KEY_GFX_DST:
- val = 1;
- break;
- case OMAPFB_COLOR_KEY_VID_SRC:
- val = 3;
- break;
- default:
- return -EINVAL;
- }
- enable_lcd_clocks(1);
- MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift);
-
- if (val != 0)
- dispc_write_reg(tr_reg, ck->trans_key);
- dispc_write_reg(df_reg, ck->background);
- enable_lcd_clocks(0);
-
- dispc.color_key = *ck;
-
- return 0;
-}
-
-static int omap_dispc_get_color_key(struct omapfb_color_key *ck)
-{
- *ck = dispc.color_key;
- return 0;
-}
-
-static void load_palette(void)
-{
-}
-
-static int omap_dispc_set_update_mode(enum omapfb_update_mode mode)
-{
- int r = 0;
-
- if (mode != dispc.update_mode) {
- switch (mode) {
- case OMAPFB_AUTO_UPDATE:
- case OMAPFB_MANUAL_UPDATE:
- enable_lcd_clocks(1);
- omap_dispc_enable_lcd_out(1);
- dispc.update_mode = mode;
- break;
- case OMAPFB_UPDATE_DISABLED:
- init_completion(&dispc.frame_done);
- omap_dispc_enable_lcd_out(0);
- if (!wait_for_completion_timeout(&dispc.frame_done,
- msecs_to_jiffies(500))) {
- dev_err(dispc.fbdev->dev,
- "timeout waiting for FRAME DONE\n");
- }
- dispc.update_mode = mode;
- enable_lcd_clocks(0);
- break;
- default:
- r = -EINVAL;
- }
- }
-
- return r;
-}
-
-static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps)
-{
- caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM;
- if (plane > 0)
- caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE;
- caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) |
- (1 << OMAPFB_COLOR_YUV422) |
- (1 << OMAPFB_COLOR_YUY422);
- if (plane = 0)
- caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) |
- (1 << OMAPFB_COLOR_CLUT_4BPP) |
- (1 << OMAPFB_COLOR_CLUT_2BPP) |
- (1 << OMAPFB_COLOR_CLUT_1BPP) |
- (1 << OMAPFB_COLOR_RGB444);
-}
-
-static enum omapfb_update_mode omap_dispc_get_update_mode(void)
-{
- return dispc.update_mode;
-}
-
-static void setup_color_conv_coef(void)
-{
- u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11);
- int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0;
- int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0;
- int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES;
- int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES;
- const struct color_conv_coef {
- int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
- int full_range;
- } ctbl_bt601_5 = {
- 298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
- };
- const struct color_conv_coef *ct;
-#define CVAL(x, y) (((x & 2047) << 16) | (y & 2047))
-
- ct = &ctbl_bt601_5;
-
- MOD_REG_FLD(cf1_reg, mask, CVAL(ct->rcr, ct->ry));
- MOD_REG_FLD(cf1_reg + 4, mask, CVAL(ct->gy, ct->rcb));
- MOD_REG_FLD(cf1_reg + 8, mask, CVAL(ct->gcb, ct->gcr));
- MOD_REG_FLD(cf1_reg + 12, mask, CVAL(ct->bcr, ct->by));
- MOD_REG_FLD(cf1_reg + 16, mask, CVAL(0, ct->bcb));
-
- MOD_REG_FLD(cf2_reg, mask, CVAL(ct->rcr, ct->ry));
- MOD_REG_FLD(cf2_reg + 4, mask, CVAL(ct->gy, ct->rcb));
- MOD_REG_FLD(cf2_reg + 8, mask, CVAL(ct->gcb, ct->gcr));
- MOD_REG_FLD(cf2_reg + 12, mask, CVAL(ct->bcr, ct->by));
- MOD_REG_FLD(cf2_reg + 16, mask, CVAL(0, ct->bcb));
-#undef CVAL
-
- MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range);
- MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range);
-}
-
-static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div)
-{
- unsigned long fck, lck;
-
- *lck_div = 1;
- pck = max(1, pck);
- fck = clk_get_rate(dispc.dss1_fck);
- lck = fck;
- *pck_div = (lck + pck - 1) / pck;
- if (is_tft)
- *pck_div = max(2, *pck_div);
- else
- *pck_div = max(3, *pck_div);
- if (*pck_div > 255) {
- *pck_div = 255;
- lck = pck * *pck_div;
- *lck_div = fck / lck;
- BUG_ON(*lck_div < 1);
- if (*lck_div > 255) {
- *lck_div = 255;
- dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n",
- pck / 1000);
- }
- }
-}
-
-static void set_lcd_tft_mode(int enable)
-{
- u32 mask;
-
- mask = 1 << 3;
- MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0);
-}
-
-static void set_lcd_timings(void)
-{
- u32 l;
- int lck_div, pck_div;
- struct lcd_panel *panel = dispc.fbdev->panel;
- int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
- unsigned long fck;
-
- l = dispc_read_reg(DISPC_TIMING_H);
- l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
- l |= ( max(1, (min(64, panel->hsw))) - 1 ) << 0;
- l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8;
- l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20;
- dispc_write_reg(DISPC_TIMING_H, l);
-
- l = dispc_read_reg(DISPC_TIMING_V);
- l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
- l |= ( max(1, (min(64, panel->vsw))) - 1 ) << 0;
- l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8;
- l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20;
- dispc_write_reg(DISPC_TIMING_V, l);
-
- l = dispc_read_reg(DISPC_POL_FREQ);
- l &= ~FLD_MASK(12, 6);
- l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12;
- l |= panel->acb & 0xff;
- dispc_write_reg(DISPC_POL_FREQ, l);
-
- calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div);
-
- l = dispc_read_reg(DISPC_DIVISOR);
- l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8));
- l |= (lck_div << 16) | (pck_div << 0);
- dispc_write_reg(DISPC_DIVISOR, l);
-
- /* update panel info with the exact clock */
- fck = clk_get_rate(dispc.dss1_fck);
- panel->pixel_clock = fck / lck_div / pck_div / 1000;
-}
-
-static void recalc_irq_mask(void)
-{
- int i;
- unsigned long irq_mask = DISPC_IRQ_MASK_ERROR;
-
- for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
- if (!dispc.irq_handlers[i].callback)
- continue;
-
- irq_mask |= dispc.irq_handlers[i].irq_mask;
- }
-
- enable_lcd_clocks(1);
- MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask);
- enable_lcd_clocks(0);
-}
-
-int omap_dispc_request_irq(unsigned long irq_mask, void (*callback)(void *data),
- void *data)
-{
- int i;
-
- BUG_ON(callback = NULL);
-
- for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
- if (dispc.irq_handlers[i].callback)
- continue;
-
- dispc.irq_handlers[i].irq_mask = irq_mask;
- dispc.irq_handlers[i].callback = callback;
- dispc.irq_handlers[i].data = data;
- recalc_irq_mask();
-
- return 0;
- }
-
- return -EBUSY;
-}
-EXPORT_SYMBOL(omap_dispc_request_irq);
-
-void omap_dispc_free_irq(unsigned long irq_mask, void (*callback)(void *data),
- void *data)
-{
- int i;
-
- for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
- if (dispc.irq_handlers[i].callback = callback &&
- dispc.irq_handlers[i].data = data) {
- dispc.irq_handlers[i].irq_mask = 0;
- dispc.irq_handlers[i].callback = NULL;
- dispc.irq_handlers[i].data = NULL;
- recalc_irq_mask();
- return;
- }
- }
-
- BUG();
-}
-EXPORT_SYMBOL(omap_dispc_free_irq);
-
-static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
-{
- u32 stat;
- int i = 0;
-
- enable_lcd_clocks(1);
-
- stat = dispc_read_reg(DISPC_IRQSTATUS);
- if (stat & DISPC_IRQ_FRAMEMASK)
- complete(&dispc.frame_done);
-
- if (stat & DISPC_IRQ_MASK_ERROR) {
- if (printk_ratelimit()) {
- dev_err(dispc.fbdev->dev, "irq error status %04x\n",
- stat & 0x7fff);
- }
- }
-
- for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
- if (unlikely(dispc.irq_handlers[i].callback &&
- (stat & dispc.irq_handlers[i].irq_mask)))
- dispc.irq_handlers[i].callback(
- dispc.irq_handlers[i].data);
- }
-
- dispc_write_reg(DISPC_IRQSTATUS, stat);
-
- enable_lcd_clocks(0);
-
- return IRQ_HANDLED;
-}
-
-static int get_dss_clocks(void)
-{
- dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
- if (IS_ERR(dispc.dss_ick)) {
- dev_err(dispc.fbdev->dev, "can't get ick\n");
- return PTR_ERR(dispc.dss_ick);
- }
-
- dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
- if (IS_ERR(dispc.dss1_fck)) {
- dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
- clk_put(dispc.dss_ick);
- return PTR_ERR(dispc.dss1_fck);
- }
-
- dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
- if (IS_ERR(dispc.dss_54m_fck)) {
- dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
- clk_put(dispc.dss_ick);
- clk_put(dispc.dss1_fck);
- return PTR_ERR(dispc.dss_54m_fck);
- }
-
- return 0;
-}
-
-static void put_dss_clocks(void)
-{
- clk_put(dispc.dss_54m_fck);
- clk_put(dispc.dss1_fck);
- clk_put(dispc.dss_ick);
-}
-
-static void enable_lcd_clocks(int enable)
-{
- if (enable) {
- clk_enable(dispc.dss_ick);
- clk_enable(dispc.dss1_fck);
- } else {
- clk_disable(dispc.dss1_fck);
- clk_disable(dispc.dss_ick);
- }
-}
-
-static void enable_digit_clocks(int enable)
-{
- if (enable)
- clk_enable(dispc.dss_54m_fck);
- else
- clk_disable(dispc.dss_54m_fck);
-}
-
-static void omap_dispc_suspend(void)
-{
- if (dispc.update_mode = OMAPFB_AUTO_UPDATE) {
- init_completion(&dispc.frame_done);
- omap_dispc_enable_lcd_out(0);
- if (!wait_for_completion_timeout(&dispc.frame_done,
- msecs_to_jiffies(500))) {
- dev_err(dispc.fbdev->dev,
- "timeout waiting for FRAME DONE\n");
- }
- enable_lcd_clocks(0);
- }
-}
-
-static void omap_dispc_resume(void)
-{
- if (dispc.update_mode = OMAPFB_AUTO_UPDATE) {
- enable_lcd_clocks(1);
- if (!dispc.ext_mode) {
- set_lcd_timings();
- load_palette();
- }
- omap_dispc_enable_lcd_out(1);
- }
-}
-
-
-static int omap_dispc_update_window(struct fb_info *fbi,
- struct omapfb_update_window *win,
- void (*complete_callback)(void *arg),
- void *complete_callback_data)
-{
- return dispc.update_mode = OMAPFB_UPDATE_DISABLED ? -ENODEV : 0;
-}
-
-static int mmap_kern(struct omapfb_mem_region *region)
-{
- struct vm_struct *kvma;
- struct vm_area_struct vma;
- pgprot_t pgprot;
- unsigned long vaddr;
-
- kvma = get_vm_area(region->size, VM_IOREMAP);
- if (kvma = NULL) {
- dev_err(dispc.fbdev->dev, "can't get kernel vm area\n");
- return -ENOMEM;
- }
- vma.vm_mm = &init_mm;
-
- vaddr = (unsigned long)kvma->addr;
-
- pgprot = pgprot_writecombine(pgprot_kernel);
- vma.vm_start = vaddr;
- vma.vm_end = vaddr + region->size;
- if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT,
- region->size, pgprot) < 0) {
- dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n");
- return -EAGAIN;
- }
- region->vaddr = (void *)vaddr;
-
- return 0;
-}
-
-static void mmap_user_open(struct vm_area_struct *vma)
-{
- int plane = (int)vma->vm_private_data;
-
- atomic_inc(&dispc.map_count[plane]);
-}
-
-static void mmap_user_close(struct vm_area_struct *vma)
-{
- int plane = (int)vma->vm_private_data;
-
- atomic_dec(&dispc.map_count[plane]);
-}
-
-static const struct vm_operations_struct mmap_user_ops = {
- .open = mmap_user_open,
- .close = mmap_user_close,
-};
-
-static int omap_dispc_mmap_user(struct fb_info *info,
- struct vm_area_struct *vma)
-{
- struct omapfb_plane_struct *plane = info->par;
- unsigned long off;
- unsigned long start;
- u32 len;
-
- if (vma->vm_end - vma->vm_start = 0)
- return 0;
- if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
- return -EINVAL;
- off = vma->vm_pgoff << PAGE_SHIFT;
-
- start = info->fix.smem_start;
- len = info->fix.smem_len;
- if (off >= len)
- return -EINVAL;
- if ((vma->vm_end - vma->vm_start + off) > len)
- return -EINVAL;
- off += start;
- vma->vm_pgoff = off >> PAGE_SHIFT;
- vma->vm_flags |= VM_IO | VM_RESERVED;
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
- vma->vm_ops = &mmap_user_ops;
- vma->vm_private_data = (void *)plane->idx;
- if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot))
- return -EAGAIN;
- /* vm_ops.open won't be called for mmap itself. */
- atomic_inc(&dispc.map_count[plane->idx]);
- return 0;
-}
-
-static void unmap_kern(struct omapfb_mem_region *region)
-{
- vunmap(region->vaddr);
-}
-
-static int alloc_palette_ram(void)
-{
- dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
- MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL);
- if (dispc.palette_vaddr = NULL) {
- dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void free_palette_ram(void)
-{
- dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE,
- dispc.palette_vaddr, dispc.palette_paddr);
-}
-
-static int alloc_fbmem(struct omapfb_mem_region *region)
-{
- region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
- region->size, ®ion->paddr, GFP_KERNEL);
-
- if (region->vaddr = NULL) {
- dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void free_fbmem(struct omapfb_mem_region *region)
-{
- dma_free_writecombine(dispc.fbdev->dev, region->size,
- region->vaddr, region->paddr);
-}
-
-static struct resmap *init_resmap(unsigned long start, size_t size)
-{
- unsigned page_cnt;
- struct resmap *res_map;
-
- page_cnt = PAGE_ALIGN(size) / PAGE_SIZE;
- res_map - kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL);
- if (res_map = NULL)
- return NULL;
- res_map->start = start;
- res_map->page_cnt = page_cnt;
- res_map->map = (unsigned long *)(res_map + 1);
- return res_map;
-}
-
-static void cleanup_resmap(struct resmap *res_map)
-{
- kfree(res_map);
-}
-
-static inline int resmap_mem_type(unsigned long start)
-{
- if (start >= OMAP2_SRAM_START &&
- start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
- return OMAPFB_MEMTYPE_SRAM;
- else
- return OMAPFB_MEMTYPE_SDRAM;
-}
-
-static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr)
-{
- return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0;
-}
-
-static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr)
-{
- BUG_ON(resmap_page_reserved(res_map, page_nr));
- *RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr);
-}
-
-static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr)
-{
- BUG_ON(!resmap_page_reserved(res_map, page_nr));
- *RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr);
-}
-
-static void resmap_reserve_region(unsigned long start, size_t size)
-{
-
- struct resmap *res_map;
- unsigned start_page;
- unsigned end_page;
- int mtype;
- unsigned i;
-
- mtype = resmap_mem_type(start);
- res_map = dispc.res_map[mtype];
- dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n",
- mtype, start, size);
- start_page = (start - res_map->start) / PAGE_SIZE;
- end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
- for (i = start_page; i < end_page; i++)
- resmap_reserve_page(res_map, i);
-}
-
-static void resmap_free_region(unsigned long start, size_t size)
-{
- struct resmap *res_map;
- unsigned start_page;
- unsigned end_page;
- unsigned i;
- int mtype;
-
- mtype = resmap_mem_type(start);
- res_map = dispc.res_map[mtype];
- dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n",
- mtype, start, size);
- start_page = (start - res_map->start) / PAGE_SIZE;
- end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
- for (i = start_page; i < end_page; i++)
- resmap_free_page(res_map, i);
-}
-
-static unsigned long resmap_alloc_region(int mtype, size_t size)
-{
- unsigned i;
- unsigned total;
- unsigned start_page;
- unsigned long start;
- struct resmap *res_map = dispc.res_map[mtype];
-
- BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map = NULL || !size);
-
- size = PAGE_ALIGN(size) / PAGE_SIZE;
- start_page = 0;
- total = 0;
- for (i = 0; i < res_map->page_cnt; i++) {
- if (resmap_page_reserved(res_map, i)) {
- start_page = i + 1;
- total = 0;
- } else if (++total = size)
- break;
- }
- if (total < size)
- return 0;
-
- start = res_map->start + start_page * PAGE_SIZE;
- resmap_reserve_region(start, size * PAGE_SIZE);
-
- return start;
-}
-
-/* Note that this will only work for user mappings, we don't deal with
- * kernel mappings here, so fbcon will keep using the old region.
- */
-static int omap_dispc_setup_mem(int plane, size_t size, int mem_type,
- unsigned long *paddr)
-{
- struct omapfb_mem_region *rg;
- unsigned long new_addr = 0;
-
- if ((unsigned)plane > dispc.mem_desc.region_cnt)
- return -EINVAL;
- if (mem_type >= DISPC_MEMTYPE_NUM)
- return -EINVAL;
- if (dispc.res_map[mem_type] = NULL)
- return -ENOMEM;
- rg = &dispc.mem_desc.region[plane];
- if (size = rg->size && mem_type = rg->type)
- return 0;
- if (atomic_read(&dispc.map_count[plane]))
- return -EBUSY;
- if (rg->size != 0)
- resmap_free_region(rg->paddr, rg->size);
- if (size != 0) {
- new_addr = resmap_alloc_region(mem_type, size);
- if (!new_addr) {
- /* Reallocate old region. */
- resmap_reserve_region(rg->paddr, rg->size);
- return -ENOMEM;
- }
- }
- rg->paddr = new_addr;
- rg->size = size;
- rg->type = mem_type;
-
- *paddr = new_addr;
-
- return 0;
-}
-
-static int setup_fbmem(struct omapfb_mem_desc *req_md)
-{
- struct omapfb_mem_region *rg;
- int i;
- int r;
- unsigned long mem_start[DISPC_MEMTYPE_NUM];
- unsigned long mem_end[DISPC_MEMTYPE_NUM];
-
- if (!req_md->region_cnt) {
- dev_err(dispc.fbdev->dev, "no memory regions defined\n");
- return -ENOENT;
- }
-
- rg = &req_md->region[0];
- memset(mem_start, 0xff, sizeof(mem_start));
- memset(mem_end, 0, sizeof(mem_end));
-
- for (i = 0; i < req_md->region_cnt; i++, rg++) {
- int mtype;
- if (rg->paddr) {
- rg->alloc = 0;
- if (rg->vaddr = NULL) {
- rg->map = 1;
- if ((r = mmap_kern(rg)) < 0)
- return r;
- }
- } else {
- if (rg->type != OMAPFB_MEMTYPE_SDRAM) {
- dev_err(dispc.fbdev->dev,
- "unsupported memory type\n");
- return -EINVAL;
- }
- rg->alloc = rg->map = 1;
- if ((r = alloc_fbmem(rg)) < 0)
- return r;
- }
- mtype = rg->type;
-
- if (rg->paddr < mem_start[mtype])
- mem_start[mtype] = rg->paddr;
- if (rg->paddr + rg->size > mem_end[mtype])
- mem_end[mtype] = rg->paddr + rg->size;
- }
-
- for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
- unsigned long start;
- size_t size;
- if (mem_end[i] = 0)
- continue;
- start = mem_start[i];
- size = mem_end[i] - start;
- dispc.res_map[i] = init_resmap(start, size);
- r = -ENOMEM;
- if (dispc.res_map[i] = NULL)
- goto fail;
- /* Initial state is that everything is reserved. This
- * includes possible holes as well, which will never be
- * freed.
- */
- resmap_reserve_region(start, size);
- }
-
- dispc.mem_desc = *req_md;
-
- return 0;
-fail:
- for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
- if (dispc.res_map[i] != NULL)
- cleanup_resmap(dispc.res_map[i]);
- }
- return r;
-}
-
-static void cleanup_fbmem(void)
-{
- struct omapfb_mem_region *rg;
- int i;
-
- for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
- if (dispc.res_map[i] != NULL)
- cleanup_resmap(dispc.res_map[i]);
- }
- rg = &dispc.mem_desc.region[0];
- for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) {
- if (rg->alloc)
- free_fbmem(rg);
- else {
- if (rg->map)
- unmap_kern(rg);
- }
- }
-}
-
-static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
- struct omapfb_mem_desc *req_vram)
-{
- int r;
- u32 l;
- struct lcd_panel *panel = fbdev->panel;
- void __iomem *ram_fw_base;
- int tmo = 10000;
- int skip_init = 0;
- int i;
-
- memset(&dispc, 0, sizeof(dispc));
-
- dispc.base = ioremap(DISPC_BASE, SZ_1K);
- if (!dispc.base) {
- dev_err(fbdev->dev, "can't ioremap DISPC\n");
- return -ENOMEM;
- }
-
- dispc.fbdev = fbdev;
- dispc.ext_mode = ext_mode;
-
- init_completion(&dispc.frame_done);
-
- if ((r = get_dss_clocks()) < 0)
- goto fail0;
-
- enable_lcd_clocks(1);
-
-#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
- l = dispc_read_reg(DISPC_CONTROL);
- /* LCD enabled ? */
- if (l & 1) {
- pr_info("omapfb: skipping hardware initialization\n");
- skip_init = 1;
- }
-#endif
-
- if (!skip_init) {
- /* Reset monitoring works only w/ the 54M clk */
- enable_digit_clocks(1);
-
- /* Soft reset */
- MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1);
-
- while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) {
- if (!--tmo) {
- dev_err(dispc.fbdev->dev, "soft reset failed\n");
- r = -ENODEV;
- enable_digit_clocks(0);
- goto fail1;
- }
- }
-
- enable_digit_clocks(0);
- }
-
- /* Enable smart standby/idle, autoidle and wakeup */
- l = dispc_read_reg(DISPC_SYSCONFIG);
- l &= ~((3 << 12) | (3 << 3));
- l |= (2 << 12) | (2 << 3) | (1 << 2) | (1 << 0);
- dispc_write_reg(DISPC_SYSCONFIG, l);
- omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG);
-
- /* Set functional clock autogating */
- l = dispc_read_reg(DISPC_CONFIG);
- l |= 1 << 9;
- dispc_write_reg(DISPC_CONFIG, l);
-
- l = dispc_read_reg(DISPC_IRQSTATUS);
- dispc_write_reg(DISPC_IRQSTATUS, l);
-
- recalc_irq_mask();
-
- if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler,
- 0, MODULE_NAME, fbdev)) < 0) {
- dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n");
- goto fail1;
- }
-
- /* L3 firewall setting: enable access to OCM RAM */
- ram_fw_base = ioremap(0x68005000, SZ_1K);
- if (!ram_fw_base) {
- dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
- goto fail1;
- }
- __raw_writel(0x402000b0, ram_fw_base + 0xa0);
- iounmap(ram_fw_base);
-
- if ((r = alloc_palette_ram()) < 0)
- goto fail2;
-
- if ((r = setup_fbmem(req_vram)) < 0)
- goto fail3;
-
- if (!skip_init) {
- for (i = 0; i < dispc.mem_desc.region_cnt; i++) {
- memset(dispc.mem_desc.region[i].vaddr, 0,
- dispc.mem_desc.region[i].size);
- }
-
- /* Set logic clock to fck, pixel clock to fck/2 for now */
- MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16);
- MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0);
-
- setup_plane_fifo(0, ext_mode);
- setup_plane_fifo(1, ext_mode);
- setup_plane_fifo(2, ext_mode);
-
- setup_color_conv_coef();
-
- set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT);
- set_load_mode(DISPC_LOAD_FRAME_ONLY);
-
- if (!ext_mode) {
- set_lcd_data_lines(panel->data_lines);
- omap_dispc_set_lcd_size(panel->x_res, panel->y_res);
- set_lcd_timings();
- } else
- set_lcd_data_lines(panel->bpp);
- enable_rfbi_mode(ext_mode);
- }
-
- l = dispc_read_reg(DISPC_REVISION);
- pr_info("omapfb: DISPC version %d.%d initialized\n",
- l >> 4 & 0x0f, l & 0x0f);
- enable_lcd_clocks(0);
-
- return 0;
-fail3:
- free_palette_ram();
-fail2:
- free_irq(INT_24XX_DSS_IRQ, fbdev);
-fail1:
- enable_lcd_clocks(0);
- put_dss_clocks();
-fail0:
- iounmap(dispc.base);
- return r;
-}
-
-static void omap_dispc_cleanup(void)
-{
- int i;
-
- omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED);
- /* This will also disable clocks that are on */
- for (i = 0; i < dispc.mem_desc.region_cnt; i++)
- omap_dispc_enable_plane(i, 0);
- cleanup_fbmem();
- free_palette_ram();
- free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
- put_dss_clocks();
- iounmap(dispc.base);
-}
-
-const struct lcd_ctrl omap2_int_ctrl = {
- .name = "internal",
- .init = omap_dispc_init,
- .cleanup = omap_dispc_cleanup,
- .get_caps = omap_dispc_get_caps,
- .set_update_mode = omap_dispc_set_update_mode,
- .get_update_mode = omap_dispc_get_update_mode,
- .update_window = omap_dispc_update_window,
- .suspend = omap_dispc_suspend,
- .resume = omap_dispc_resume,
- .setup_plane = omap_dispc_setup_plane,
- .setup_mem = omap_dispc_setup_mem,
- .set_scale = omap_dispc_set_scale,
- .enable_plane = omap_dispc_enable_plane,
- .set_color_key = omap_dispc_set_color_key,
- .get_color_key = omap_dispc_get_color_key,
- .mmap = omap_dispc_mmap_user,
-};
diff --git a/drivers/video/omap/dispc.h b/drivers/video/omap/dispc.h
deleted file mode 100644
index c15ea77..0000000
--- a/drivers/video/omap/dispc.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _DISPC_H
-#define _DISPC_H
-
-#include <linux/interrupt.h>
-
-#define DISPC_PLANE_GFX 0
-#define DISPC_PLANE_VID1 1
-#define DISPC_PLANE_VID2 2
-
-#define DISPC_RGB_1_BPP 0x00
-#define DISPC_RGB_2_BPP 0x01
-#define DISPC_RGB_4_BPP 0x02
-#define DISPC_RGB_8_BPP 0x03
-#define DISPC_RGB_12_BPP 0x04
-#define DISPC_RGB_16_BPP 0x06
-#define DISPC_RGB_24_BPP 0x08
-#define DISPC_RGB_24_BPP_UNPACK_32 0x09
-#define DISPC_YUV2_422 0x0a
-#define DISPC_UYVY_422 0x0b
-
-#define DISPC_BURST_4x32 0
-#define DISPC_BURST_8x32 1
-#define DISPC_BURST_16x32 2
-
-#define DISPC_LOAD_CLUT_AND_FRAME 0x00
-#define DISPC_LOAD_CLUT_ONLY 0x01
-#define DISPC_LOAD_FRAME_ONLY 0x02
-#define DISPC_LOAD_CLUT_ONCE_FRAME 0x03
-
-#define DISPC_TFT_DATA_LINES_12 0
-#define DISPC_TFT_DATA_LINES_16 1
-#define DISPC_TFT_DATA_LINES_18 2
-#define DISPC_TFT_DATA_LINES_24 3
-
-extern void omap_dispc_set_lcd_size(int width, int height);
-
-extern void omap_dispc_enable_lcd_out(int enable);
-extern void omap_dispc_enable_digit_out(int enable);
-
-extern int omap_dispc_request_irq(unsigned long irq_mask,
- void (*callback)(void *data), void *data);
-extern void omap_dispc_free_irq(unsigned long irq_mask,
- void (*callback)(void *data), void *data);
-
-extern const struct lcd_ctrl omap2_int_ctrl;
-#endif
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index af3c9e5..3a5ab13 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -207,11 +207,7 @@ struct omapfb_device {
struct platform_device *dssdev; /* dummy dev for clocks */
};
-#ifdef CONFIG_ARCH_OMAP1
extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 440a5dd..73924bc 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -34,7 +34,6 @@
#include "omapfb.h"
#include "lcdc.h"
-#include "dispc.h"
#define MODULE_NAME "omapfb"
@@ -106,11 +105,7 @@ static struct platform_device omapdss_device = {
extern struct lcd_ctrl hwa742_ctrl;
static const struct lcd_ctrl *ctrls[] = {
-#ifdef CONFIG_ARCH_OMAP1
&omap1_int_ctrl,
-#else
- &omap2_int_ctrl,
-#endif
#ifdef CONFIG_FB_OMAP_LCDC_HWA742
&hwa742_ctrl,
@@ -118,11 +113,7 @@ static const struct lcd_ctrl *ctrls[] = {
};
#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-#ifdef CONFIG_ARCH_OMAP1
extern struct lcd_ctrl_extif omap1_ext_if;
-#else
-extern struct lcd_ctrl_extif omap2_ext_if;
-#endif
#endif
static void omapfb_rqueue_lock(struct omapfb_device *fbdev)
@@ -1717,17 +1708,10 @@ static int omapfb_do_probe(struct platform_device *pdev,
mutex_init(&fbdev->rqueue_mutex);
-#ifdef CONFIG_ARCH_OMAP1
fbdev->int_ctrl = &omap1_int_ctrl;
#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
fbdev->ext_if = &omap1_ext_if;
#endif
-#else /* OMAP2 */
- fbdev->int_ctrl = &omap2_int_ctrl;
-#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
- fbdev->ext_if = &omap2_ext_if;
-#endif
-#endif
if (omapfb_find_ctrl(fbdev) < 0) {
dev_err(fbdev->dev,
"LCD controller not found, board not supported\n");
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
deleted file mode 100644
index 2c1a340..0000000
--- a/drivers/video/omap/rfbi.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
- * OMAP2 Remote Frame Buffer Interface support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-/* To work around an RFBI transfer rate limitation */
-#define OMAP_RFBI_RATE_LIMIT 1
-
-#define RFBI_BASE 0x48050800
-#define RFBI_REVISION 0x0000
-#define RFBI_SYSCONFIG 0x0010
-#define RFBI_SYSSTATUS 0x0014
-#define RFBI_CONTROL 0x0040
-#define RFBI_PIXEL_CNT 0x0044
-#define RFBI_LINE_NUMBER 0x0048
-#define RFBI_CMD 0x004c
-#define RFBI_PARAM 0x0050
-#define RFBI_DATA 0x0054
-#define RFBI_READ 0x0058
-#define RFBI_STATUS 0x005c
-#define RFBI_CONFIG0 0x0060
-#define RFBI_ONOFF_TIME0 0x0064
-#define RFBI_CYCLE_TIME0 0x0068
-#define RFBI_DATA_CYCLE1_0 0x006c
-#define RFBI_DATA_CYCLE2_0 0x0070
-#define RFBI_DATA_CYCLE3_0 0x0074
-#define RFBI_VSYNC_WIDTH 0x0090
-#define RFBI_HSYNC_WIDTH 0x0094
-
-#define DISPC_BASE 0x48050400
-#define DISPC_CONTROL 0x0040
-#define DISPC_IRQ_FRAMEMASK 0x0001
-
-static struct {
- void __iomem *base;
- void (*lcdc_callback)(void *data);
- void *lcdc_callback_data;
- unsigned long l4_khz;
- int bits_per_cycle;
- struct omapfb_device *fbdev;
- struct clk *dss_ick;
- struct clk *dss1_fck;
- unsigned tearsync_pin_cnt;
- unsigned tearsync_mode;
-} rfbi;
-
-static inline void rfbi_write_reg(int idx, u32 val)
-{
- __raw_writel(val, rfbi.base + idx);
-}
-
-static inline u32 rfbi_read_reg(int idx)
-{
- return __raw_readl(rfbi.base + idx);
-}
-
-static int rfbi_get_clocks(void)
-{
- rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
- if (IS_ERR(rfbi.dss_ick)) {
- dev_err(rfbi.fbdev->dev, "can't get ick\n");
- return PTR_ERR(rfbi.dss_ick);
- }
-
- rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
- if (IS_ERR(rfbi.dss1_fck)) {
- dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
- clk_put(rfbi.dss_ick);
- return PTR_ERR(rfbi.dss1_fck);
- }
-
- return 0;
-}
-
-static void rfbi_put_clocks(void)
-{
- clk_put(rfbi.dss1_fck);
- clk_put(rfbi.dss_ick);
-}
-
-static void rfbi_enable_clocks(int enable)
-{
- if (enable) {
- clk_enable(rfbi.dss_ick);
- clk_enable(rfbi.dss1_fck);
- } else {
- clk_disable(rfbi.dss1_fck);
- clk_disable(rfbi.dss_ick);
- }
-}
-
-
-#ifdef VERBOSE
-static void rfbi_print_timings(void)
-{
- u32 l;
- u32 time;
-
- l = rfbi_read_reg(RFBI_CONFIG0);
- time = 1000000000 / rfbi.l4_khz;
- if (l & (1 << 4))
- time *= 2;
-
- dev_dbg(rfbi.fbdev->dev, "Tick time %u ps\n", time);
- l = rfbi_read_reg(RFBI_ONOFF_TIME0);
- dev_dbg(rfbi.fbdev->dev,
- "CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
- "REONTIME %d, REOFFTIME %d\n",
- l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
- (l >> 20) & 0x0f, (l >> 24) & 0x3f);
-
- l = rfbi_read_reg(RFBI_CYCLE_TIME0);
- dev_dbg(rfbi.fbdev->dev,
- "WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
- "ACCESSTIME %d\n",
- (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
- (l >> 22) & 0x3f);
-}
-#else
-static void rfbi_print_timings(void) {}
-#endif
-
-static void rfbi_set_timings(const struct extif_timings *t)
-{
- u32 l;
-
- BUG_ON(!t->converted);
-
- rfbi_enable_clocks(1);
- rfbi_write_reg(RFBI_ONOFF_TIME0, t->tim[0]);
- rfbi_write_reg(RFBI_CYCLE_TIME0, t->tim[1]);
-
- l = rfbi_read_reg(RFBI_CONFIG0);
- l &= ~(1 << 4);
- l |= (t->tim[2] ? 1 : 0) << 4;
- rfbi_write_reg(RFBI_CONFIG0, l);
-
- rfbi_print_timings();
- rfbi_enable_clocks(0);
-}
-
-static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
-{
- *clk_period = 1000000000 / rfbi.l4_khz;
- *max_clk_div = 2;
-}
-
-static int ps_to_rfbi_ticks(int time, int div)
-{
- unsigned long tick_ps;
- int ret;
-
- /* Calculate in picosecs to yield more exact results */
- tick_ps = 1000000000 / (rfbi.l4_khz) * div;
-
- ret = (time + tick_ps - 1) / tick_ps;
-
- return ret;
-}
-
-#ifdef OMAP_RFBI_RATE_LIMIT
-static unsigned long rfbi_get_max_tx_rate(void)
-{
- unsigned long l4_rate, dss1_rate;
- int min_l4_ticks = 0;
- int i;
-
- /* According to TI this can't be calculated so make the
- * adjustments for a couple of known frequencies and warn for
- * others.
- */
- static const struct {
- unsigned long l4_clk; /* HZ */
- unsigned long dss1_clk; /* HZ */
- unsigned long min_l4_ticks;
- } ftab[] = {
- { 55, 132, 7, }, /* 7.86 MPix/s */
- { 110, 110, 12, }, /* 9.16 MPix/s */
- { 110, 132, 10, }, /* 11 Mpix/s */
- { 120, 120, 10, }, /* 12 Mpix/s */
- { 133, 133, 10, }, /* 13.3 Mpix/s */
- };
-
- l4_rate = rfbi.l4_khz / 1000;
- dss1_rate = clk_get_rate(rfbi.dss1_fck) / 1000000;
-
- for (i = 0; i < ARRAY_SIZE(ftab); i++) {
- /* Use a window instead of an exact match, to account
- * for different DPLL multiplier / divider pairs.
- */
- if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
- abs(ftab[i].dss1_clk - dss1_rate) < 3) {
- min_l4_ticks = ftab[i].min_l4_ticks;
- break;
- }
- }
- if (i = ARRAY_SIZE(ftab)) {
- /* Can't be sure, return anyway the maximum not
- * rate-limited. This might cause a problem only for the
- * tearing synchronisation.
- */
- dev_err(rfbi.fbdev->dev,
- "can't determine maximum RFBI transfer rate\n");
- return rfbi.l4_khz * 1000;
- }
- return rfbi.l4_khz * 1000 / min_l4_ticks;
-}
-#else
-static int rfbi_get_max_tx_rate(void)
-{
- return rfbi.l4_khz * 1000;
-}
-#endif
-
-
-static int rfbi_convert_timings(struct extif_timings *t)
-{
- u32 l;
- int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
- int actim, recyc, wecyc;
- int div = t->clk_div;
-
- if (div <= 0 || div > 2)
- return -1;
-
- /* Make sure that after conversion it still holds that:
- * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
- * csoff > cson, csoff >= max(weoff, reoff), actim > reon
- */
- weon = ps_to_rfbi_ticks(t->we_on_time, div);
- weoff = ps_to_rfbi_ticks(t->we_off_time, div);
- if (weoff <= weon)
- weoff = weon + 1;
- if (weon > 0x0f)
- return -1;
- if (weoff > 0x3f)
- return -1;
-
- reon = ps_to_rfbi_ticks(t->re_on_time, div);
- reoff = ps_to_rfbi_ticks(t->re_off_time, div);
- if (reoff <= reon)
- reoff = reon + 1;
- if (reon > 0x0f)
- return -1;
- if (reoff > 0x3f)
- return -1;
-
- cson = ps_to_rfbi_ticks(t->cs_on_time, div);
- csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
- if (csoff <= cson)
- csoff = cson + 1;
- if (csoff < max(weoff, reoff))
- csoff = max(weoff, reoff);
- if (cson > 0x0f)
- return -1;
- if (csoff > 0x3f)
- return -1;
-
- l = cson;
- l |= csoff << 4;
- l |= weon << 10;
- l |= weoff << 14;
- l |= reon << 20;
- l |= reoff << 24;
-
- t->tim[0] = l;
-
- actim = ps_to_rfbi_ticks(t->access_time, div);
- if (actim <= reon)
- actim = reon + 1;
- if (actim > 0x3f)
- return -1;
-
- wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
- if (wecyc < weoff)
- wecyc = weoff;
- if (wecyc > 0x3f)
- return -1;
-
- recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
- if (recyc < reoff)
- recyc = reoff;
- if (recyc > 0x3f)
- return -1;
-
- cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
- if (cs_pulse > 0x3f)
- return -1;
-
- l = wecyc;
- l |= recyc << 6;
- l |= cs_pulse << 12;
- l |= actim << 22;
-
- t->tim[1] = l;
-
- t->tim[2] = div - 1;
-
- t->converted = 1;
-
- return 0;
-}
-
-static int rfbi_setup_tearsync(unsigned pin_cnt,
- unsigned hs_pulse_time, unsigned vs_pulse_time,
- int hs_pol_inv, int vs_pol_inv, int extif_div)
-{
- int hs, vs;
- int min;
- u32 l;
-
- if (pin_cnt != 1 && pin_cnt != 2)
- return -EINVAL;
-
- hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
- vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
- if (hs < 2)
- return -EDOM;
- if (pin_cnt = 2)
- min = 2;
- else
- min = 4;
- if (vs < min)
- return -EDOM;
- if (vs = hs)
- return -EINVAL;
- rfbi.tearsync_pin_cnt = pin_cnt;
- dev_dbg(rfbi.fbdev->dev,
- "setup_tearsync: pins %d hs %d vs %d hs_inv %d vs_inv %d\n",
- pin_cnt, hs, vs, hs_pol_inv, vs_pol_inv);
-
- rfbi_enable_clocks(1);
- rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
- rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
-
- l = rfbi_read_reg(RFBI_CONFIG0);
- if (hs_pol_inv)
- l &= ~(1 << 21);
- else
- l |= 1 << 21;
- if (vs_pol_inv)
- l &= ~(1 << 20);
- else
- l |= 1 << 20;
- rfbi_enable_clocks(0);
-
- return 0;
-}
-
-static int rfbi_enable_tearsync(int enable, unsigned line)
-{
- u32 l;
-
- dev_dbg(rfbi.fbdev->dev, "tearsync %d line %d mode %d\n",
- enable, line, rfbi.tearsync_mode);
- if (line > (1 << 11) - 1)
- return -EINVAL;
-
- rfbi_enable_clocks(1);
- l = rfbi_read_reg(RFBI_CONFIG0);
- l &= ~(0x3 << 2);
- if (enable) {
- rfbi.tearsync_mode = rfbi.tearsync_pin_cnt;
- l |= rfbi.tearsync_mode << 2;
- } else
- rfbi.tearsync_mode = 0;
- rfbi_write_reg(RFBI_CONFIG0, l);
- rfbi_write_reg(RFBI_LINE_NUMBER, line);
- rfbi_enable_clocks(0);
-
- return 0;
-}
-
-static void rfbi_write_command(const void *buf, unsigned int len)
-{
- rfbi_enable_clocks(1);
- if (rfbi.bits_per_cycle = 16) {
- const u16 *w = buf;
- BUG_ON(len & 1);
- for (; len; len -= 2)
- rfbi_write_reg(RFBI_CMD, *w++);
- } else {
- const u8 *b = buf;
- BUG_ON(rfbi.bits_per_cycle != 8);
- for (; len; len--)
- rfbi_write_reg(RFBI_CMD, *b++);
- }
- rfbi_enable_clocks(0);
-}
-
-static void rfbi_read_data(void *buf, unsigned int len)
-{
- rfbi_enable_clocks(1);
- if (rfbi.bits_per_cycle = 16) {
- u16 *w = buf;
- BUG_ON(len & ~1);
- for (; len; len -= 2) {
- rfbi_write_reg(RFBI_READ, 0);
- *w++ = rfbi_read_reg(RFBI_READ);
- }
- } else {
- u8 *b = buf;
- BUG_ON(rfbi.bits_per_cycle != 8);
- for (; len; len--) {
- rfbi_write_reg(RFBI_READ, 0);
- *b++ = rfbi_read_reg(RFBI_READ);
- }
- }
- rfbi_enable_clocks(0);
-}
-
-static void rfbi_write_data(const void *buf, unsigned int len)
-{
- rfbi_enable_clocks(1);
- if (rfbi.bits_per_cycle = 16) {
- const u16 *w = buf;
- BUG_ON(len & 1);
- for (; len; len -= 2)
- rfbi_write_reg(RFBI_PARAM, *w++);
- } else {
- const u8 *b = buf;
- BUG_ON(rfbi.bits_per_cycle != 8);
- for (; len; len--)
- rfbi_write_reg(RFBI_PARAM, *b++);
- }
- rfbi_enable_clocks(0);
-}
-
-static void rfbi_transfer_area(int width, int height,
- void (callback)(void * data), void *data)
-{
- u32 w;
-
- BUG_ON(callback = NULL);
-
- rfbi_enable_clocks(1);
- omap_dispc_set_lcd_size(width, height);
-
- rfbi.lcdc_callback = callback;
- rfbi.lcdc_callback_data = data;
-
- rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
-
- w = rfbi_read_reg(RFBI_CONTROL);
- w |= 1; /* enable */
- if (!rfbi.tearsync_mode)
- w |= 1 << 4; /* internal trigger, reset by HW */
- rfbi_write_reg(RFBI_CONTROL, w);
-
- omap_dispc_enable_lcd_out(1);
-}
-
-static inline void _stop_transfer(void)
-{
- u32 w;
-
- w = rfbi_read_reg(RFBI_CONTROL);
- rfbi_write_reg(RFBI_CONTROL, w & ~(1 << 0));
- rfbi_enable_clocks(0);
-}
-
-static void rfbi_dma_callback(void *data)
-{
- _stop_transfer();
- rfbi.lcdc_callback(rfbi.lcdc_callback_data);
-}
-
-static void rfbi_set_bits_per_cycle(int bpc)
-{
- u32 l;
-
- rfbi_enable_clocks(1);
- l = rfbi_read_reg(RFBI_CONFIG0);
- l &= ~(0x03 << 0);
-
- switch (bpc) {
- case 8:
- break;
- case 16:
- l |= 3;
- break;
- default:
- BUG();
- }
- rfbi_write_reg(RFBI_CONFIG0, l);
- rfbi.bits_per_cycle = bpc;
- rfbi_enable_clocks(0);
-}
-
-static int rfbi_init(struct omapfb_device *fbdev)
-{
- u32 l;
- int r;
-
- rfbi.fbdev = fbdev;
- rfbi.base = ioremap(RFBI_BASE, SZ_1K);
- if (!rfbi.base) {
- dev_err(fbdev->dev, "can't ioremap RFBI\n");
- return -ENOMEM;
- }
-
- if ((r = rfbi_get_clocks()) < 0)
- return r;
- rfbi_enable_clocks(1);
-
- rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000;
-
- /* Reset */
- rfbi_write_reg(RFBI_SYSCONFIG, 1 << 1);
- while (!(rfbi_read_reg(RFBI_SYSSTATUS) & (1 << 0)));
-
- l = rfbi_read_reg(RFBI_SYSCONFIG);
- /* Enable autoidle and smart-idle */
- l |= (1 << 0) | (2 << 3);
- rfbi_write_reg(RFBI_SYSCONFIG, l);
-
- /* 16-bit interface, ITE trigger mode, 16-bit data */
- l = (0x03 << 0) | (0x00 << 2) | (0x01 << 5) | (0x02 << 7);
- l |= (0 << 9) | (1 << 20) | (1 << 21);
- rfbi_write_reg(RFBI_CONFIG0, l);
-
- rfbi_write_reg(RFBI_DATA_CYCLE1_0, 0x00000010);
-
- l = rfbi_read_reg(RFBI_CONTROL);
- /* Select CS0, clear bypass mode */
- l = (0x01 << 2);
- rfbi_write_reg(RFBI_CONTROL, l);
-
- r = omap_dispc_request_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback,
- NULL);
- if (r < 0) {
- dev_err(fbdev->dev, "can't get DISPC irq\n");
- rfbi_enable_clocks(0);
- return r;
- }
-
- l = rfbi_read_reg(RFBI_REVISION);
- pr_info("omapfb: RFBI version %d.%d initialized\n",
- (l >> 4) & 0x0f, l & 0x0f);
-
- rfbi_enable_clocks(0);
-
- return 0;
-}
-
-static void rfbi_cleanup(void)
-{
- omap_dispc_free_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback, NULL);
- rfbi_put_clocks();
- iounmap(rfbi.base);
-}
-
-const struct lcd_ctrl_extif omap2_ext_if = {
- .init = rfbi_init,
- .cleanup = rfbi_cleanup,
- .get_clk_info = rfbi_get_clk_info,
- .get_max_tx_rate = rfbi_get_max_tx_rate,
- .set_bits_per_cycle = rfbi_set_bits_per_cycle,
- .convert_timings = rfbi_convert_timings,
- .set_timings = rfbi_set_timings,
- .write_command = rfbi_write_command,
- .read_data = rfbi_read_data,
- .write_data = rfbi_write_data,
- .transfer_area = rfbi_transfer_area,
- .setup_tearsync = rfbi_setup_tearsync,
- .enable_tearsync = rfbi_enable_tearsync,
-
- .max_transmit_size = (u32) ~0,
-};
-
--
1.7.4.1
^ permalink raw reply related
* [PATCH 03/16] OMAPDSS: Remove video SRAM support
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.
This patch removes the use of SRAM as video ram for the omapdss driver
to simplify memory handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/include/plat/vram.h | 21 +------
drivers/video/omap2/dss/dispc.c | 1 -
drivers/video/omap2/omapfb/omapfb-ioctl.c | 2 +-
drivers/video/omap2/omapfb/omapfb-main.c | 4 +-
drivers/video/omap2/vram.c | 99 ++---------------------------
5 files changed, 9 insertions(+), 118 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index 0aa4ecd..4d65b7d 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -23,40 +23,21 @@
#include <linux/types.h>
-#define OMAP_VRAM_MEMTYPE_SDRAM 0
-#define OMAP_VRAM_MEMTYPE_SRAM 1
-#define OMAP_VRAM_MEMTYPE_MAX 1
-
extern int omap_vram_add_region(unsigned long paddr, size_t size);
extern int omap_vram_free(unsigned long paddr, size_t size);
-extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_alloc(size_t size, unsigned long *paddr);
extern int omap_vram_reserve(unsigned long paddr, size_t size);
extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
unsigned long *largest_free_block);
#ifdef CONFIG_OMAP2_VRAM
extern void omap_vram_set_sdram_vram(u32 size, u32 start);
-extern void omap_vram_set_sram_vram(u32 size, u32 start);
extern void omap_vram_reserve_sdram_memblock(void);
-extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail);
#else
static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
-static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
static inline void omap_vram_reserve_sdram_memblock(void) { }
-static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail)
-{
- return 0;
-}
#endif
#endif
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a5ec7f3..b82789e 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,7 +37,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <plat/sram.h>
#include <plat/clock.h>
#include <video/omapdss.h>
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 16ba619..6a09ef8 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -215,7 +215,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
int r = 0, i;
size_t size;
- if (mi->type > OMAPFB_MEMTYPE_MAX)
+ if (mi->type != OMAPFB_MEMTYPE_SDRAM)
return -EINVAL;
size = PAGE_ALIGN(mi->size);
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index ce15831..17e7320b 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1399,7 +1399,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
if (!paddr) {
DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
- r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr);
+ r = omap_vram_alloc(size, &paddr);
} else {
DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
ofbi->id);
@@ -1669,7 +1669,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
int old_type = rg->type;
int r;
- if (type > OMAPFB_MEMTYPE_MAX)
+ if (type != OMAPFB_MEMTYPE_SDRAM)
return -EINVAL;
size = PAGE_ALIGN(size);
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 9441e2e..87e421e 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -33,7 +33,6 @@
#include <asm/setup.h>
-#include <plat/sram.h>
#include <plat/vram.h>
#include <plat/dma.h>
@@ -43,10 +42,6 @@
#define DBG(format, ...)
#endif
-#define OMAP2_SRAM_START 0x40200000
-/* Maximum size, in reality this is smaller if SRAM is partially locked. */
-#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */
-
/* postponed regions are used to temporarily store region information at boot
* time when we cannot yet allocate the region list */
#define MAX_POSTPONED_REGIONS 10
@@ -74,15 +69,6 @@ struct vram_region {
static DEFINE_MUTEX(region_mutex);
static LIST_HEAD(region_list);
-static inline int region_mem_type(unsigned long paddr)
-{
- if (paddr >= OMAP2_SRAM_START &&
- paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
- return OMAP_VRAM_MEMTYPE_SRAM;
- else
- return OMAP_VRAM_MEMTYPE_SDRAM;
-}
-
static struct vram_region *omap_vram_create_region(unsigned long paddr,
unsigned pages)
{
@@ -212,9 +198,6 @@ static int _omap_vram_reserve(unsigned long paddr, unsigned pages)
DBG("checking region %lx %d\n", rm->paddr, rm->pages);
- if (region_mem_type(rm->paddr) != region_mem_type(paddr))
- continue;
-
start = rm->paddr;
end = start + (rm->pages << PAGE_SHIFT) - 1;
if (start > paddr || end < paddr + size - 1)
@@ -320,7 +303,7 @@ err:
return r;
}
-static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
+static int _omap_vram_alloc(unsigned pages, unsigned long *paddr)
{
struct vram_region *rm;
struct vram_alloc *alloc;
@@ -330,9 +313,6 @@ static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
DBG("checking region %lx %d\n", rm->paddr, rm->pages);
- if (region_mem_type(rm->paddr) != mtype)
- continue;
-
start = rm->paddr;
list_for_each_entry(alloc, &rm->alloc_list, list) {
@@ -365,21 +345,21 @@ found:
return -ENOMEM;
}
-int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
+int omap_vram_alloc(size_t size, unsigned long *paddr)
{
unsigned pages;
int r;
- BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size);
+ BUG_ON(!size);
- DBG("alloc mem type %d size %d\n", mtype, size);
+ DBG("alloc mem size %d\n", size);
size = PAGE_ALIGN(size);
pages = size >> PAGE_SHIFT;
mutex_lock(®ion_mutex);
- r = _omap_vram_alloc(mtype, pages, paddr);
+ r = _omap_vram_alloc(pages, paddr);
mutex_unlock(®ion_mutex);
@@ -501,10 +481,6 @@ arch_initcall(omap_vram_init);
/* boottime vram alloc stuff */
/* set from board file */
-static u32 omap_vram_sram_start __initdata;
-static u32 omap_vram_sram_size __initdata;
-
-/* set from board file */
static u32 omap_vram_sdram_start __initdata;
static u32 omap_vram_sdram_size __initdata;
@@ -587,73 +563,8 @@ void __init omap_vram_reserve_sdram_memblock(void)
pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
}
-/*
- * Called at sram init time, before anything is pushed to the SRAM stack.
- * Because of the stack scheme, we will allocate everything from the
- * start of the lowest address region to the end of SRAM. This will also
- * include padding for page alignment and possible holes between regions.
- *
- * As opposed to the SDRAM case, we'll also do any dynamic allocations at
- * this point, since the driver built as a module would have problem with
- * freeing / reallocating the regions.
- */
-unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail)
-{
- unsigned long pend_avail;
- unsigned long reserved;
- u32 paddr;
- u32 size;
-
- paddr = omap_vram_sram_start;
- size = omap_vram_sram_size;
-
- if (!size)
- return 0;
-
- reserved = 0;
- pend_avail = pstart_avail + size_avail;
-
- if (!paddr) {
- /* Dynamic allocation */
- if ((size_avail & PAGE_MASK) < size) {
- pr_err("Not enough SRAM for VRAM\n");
- return 0;
- }
- size_avail = (size_avail - size) & PAGE_MASK;
- paddr = pstart_avail + size_avail;
- }
-
- if (paddr < sram_pstart ||
- paddr + size > sram_pstart + sram_size) {
- pr_err("Illegal SRAM region for VRAM\n");
- return 0;
- }
-
- /* Reserve everything above the start of the region. */
- if (pend_avail - paddr > reserved)
- reserved = pend_avail - paddr;
- size_avail = pend_avail - reserved - pstart_avail;
-
- omap_vram_add_region(paddr, size);
-
- if (reserved)
- pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
-
- return reserved;
-}
-
void __init omap_vram_set_sdram_vram(u32 size, u32 start)
{
omap_vram_sdram_start = start;
omap_vram_sdram_size = size;
}
-
-void __init omap_vram_set_sram_vram(u32 size, u32 start)
-{
- omap_vram_sram_start = start;
- omap_vram_sram_size = size;
-}
--
1.7.4.1
^ permalink raw reply related
* [PATCH 04/16] OMAPFB: Remove video SRAM support (old omapfb)
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.
This patch removes the use of SRAM as video ram for the old omapfb
driver to simplify memory handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/fb.c | 172 --------------------------------------
arch/arm/plat-omap/fb.h | 10 --
drivers/video/omap/omapfb_main.c | 2 +-
3 files changed, 1 insertions(+), 183 deletions(-)
delete mode 100644 arch/arm/plat-omap/fb.h
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index c9e5d72..15d4d16 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -34,9 +34,6 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/sram.h>
-
-#include "fb.h"
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
@@ -74,24 +71,6 @@ static inline int range_included(unsigned long start1, unsigned long size1,
return start1 >= start2 && start1 + size1 <= start2 + size2;
}
-
-/* Check if there is an overlapping region. */
-static int fbmem_region_reserved(unsigned long start, size_t size)
-{
- struct omapfb_mem_region *rg;
- int i;
-
- rg = &omapfb_config.mem_desc.region[0];
- for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
- if (!rg->paddr)
- /* Empty slot. */
- continue;
- if (ranges_overlap(start, size, rg->paddr, rg->size))
- return 1;
- }
- return 0;
-}
-
/*
* Get the region_idx`th region from board config/ATAG and convert it to
* our internal format.
@@ -119,60 +98,6 @@ static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
return 0;
}
-static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
- unsigned long mem_start,
- unsigned long mem_size)
-{
- /*
- * Check if the configuration specifies the type explicitly.
- * type = 0 && paddr = 0, a default don't care case maps to
- * the SDRAM type.
- */
- if (rg->type || !rg->paddr)
- return 0;
- if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
- rg->type = mem_type;
- return 0;
- }
- /* Can't determine it. */
- return -1;
-}
-
-static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
- unsigned long start_avail, unsigned size_avail)
-{
- unsigned long paddr = rg->paddr;
- size_t size = rg->size;
-
- if (rg->type > OMAPFB_MEMTYPE_MAX) {
- printk(KERN_ERR
- "Invalid start address for FB region %d\n", region_idx);
- return -EINVAL;
- }
-
- if (!rg->size) {
- printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
- return -EINVAL;
- }
-
- if (!paddr)
- /* Allocate this dynamically, leave paddr 0 for now. */
- return 0;
-
- /*
- * Fixed region for the given RAM range. Check if it's already
- * reserved by the FB code or someone else.
- */
- if (fbmem_region_reserved(paddr, size) ||
- !range_included(paddr, size, start_avail, size_avail)) {
- printk(KERN_ERR "Trying to use reserved memory "
- "for FB region %d\n", region_idx);
- return -EINVAL;
- }
-
- return 0;
-}
-
static int valid_sdram(unsigned long addr, unsigned long size)
{
return memblock_is_region_memory(addr, size);
@@ -250,85 +175,6 @@ void __init omapfb_reserve_sdram_memblock(void)
reserved);
}
-/*
- * Called at sram init time, before anything is pushed to the SRAM stack.
- * Because of the stack scheme, we will allocate everything from the
- * start of the lowest address region to the end of SRAM. This will also
- * include padding for page alignment and possible holes between regions.
- *
- * As opposed to the SDRAM case, we'll also do any dynamic allocations at
- * this point, since the driver built as a module would have problem with
- * freeing / reallocating the regions.
- */
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail)
-{
- struct omapfb_mem_region rg;
- unsigned long pend_avail;
- unsigned long reserved;
- int i;
-
- if (config_invalid)
- return 0;
-
- reserved = 0;
- pend_avail = pstart_avail + size_avail;
- for (i = 0; ; i++) {
- if (get_fbmem_region(i, &rg) < 0)
- break;
- if (i = OMAPFB_PLANE_NUM) {
- printk(KERN_ERR
- "Extraneous FB mem configuration entries\n");
- config_invalid = 1;
- return 0;
- }
-
- /* Check if it's our memory type. */
- if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
- sram_pstart, sram_size) < 0 ||
- (rg.type != OMAPFB_MEMTYPE_SRAM))
- continue;
- BUG_ON(omapfb_config.mem_desc.region[i].size);
-
- if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
- config_invalid = 1;
- return 0;
- }
-
- if (!rg.paddr) {
- /* Dynamic allocation */
- if ((size_avail & PAGE_MASK) < rg.size) {
- printk("Not enough SRAM for FB region %d\n",
- i);
- config_invalid = 1;
- return 0;
- }
- size_avail = (size_avail - rg.size) & PAGE_MASK;
- rg.paddr = pstart_avail + size_avail;
- }
- /* Reserve everything above the start of the region. */
- if (pend_avail - rg.paddr > reserved)
- reserved = pend_avail - rg.paddr;
- size_avail = pend_avail - reserved - pstart_avail;
-
- /*
- * We have a kernel mapping for this already, so the
- * driver won't have to make one.
- */
- rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
- omapfb_config.mem_desc.region[i] = rg;
- configured_regions++;
- }
- omapfb_config.mem_desc.region_cnt = i;
- if (reserved)
- pr_info("Reserving %lu bytes SRAM for frame buffer\n",
- reserved);
- return reserved;
-}
-
void omapfb_set_ctrl_platform_data(void *data)
{
omapfb_config.ctrl_platform_data = data;
@@ -390,15 +236,6 @@ void omapfb_reserve_sdram_memblock(void)
{
}
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long start_avail,
- unsigned long size_avail)
-{
- return 0;
-}
-
#else
void omapfb_set_platform_data(struct omapfb_platform_data *data)
@@ -409,13 +246,4 @@ void omapfb_reserve_sdram_memblock(void)
{
}
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long start_avail,
- unsigned long size_avail)
-{
- return 0;
-}
-
#endif
diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h
deleted file mode 100644
index d765d0b..0000000
--- a/arch/arm/plat-omap/fb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __PLAT_OMAP_FB_H__
-#define __PLAT_OMAP_FB_H__
-
-extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail);
-
-#endif /* __PLAT_OMAP_FB_H__ */
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 73924bc..aaf0990 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -867,7 +867,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
if (fbdev->ctrl->setup_mem = NULL)
return -ENODEV;
- if (mi->type > OMAPFB_MEMTYPE_MAX)
+ if (mi->type != OMAPFB_MEMTYPE_SDRAM)
return -EINVAL;
size = PAGE_ALIGN(mi->size);
--
1.7.4.1
^ permalink raw reply related
* [PATCH 05/16] OMAP2+: remove unneeded #include omapfb.h
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/io.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3f174d5..7fee69c 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,7 +21,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
-#include <linux/omapfb.h>
#include <asm/tlb.h>
--
1.7.4.1
^ permalink raw reply related
* [PATCH 06/16] OMAP: N770: remove HWA742 platform data
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
In an effort to clean up the old omapfb driver, this patch removes
HWA742 (the display chip used in N770) platform data. This can be done
as N770 is the only user of HWA742, and the platform data contains only
one field, te_connected, which we can just presume to be true in the
HWA742 driver.
This allows us to remove omapfb_set_ctrl_platform_data(), and the
mechanism to pass the platform data, in a later patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap1/board-nokia770.c | 6 ------
arch/arm/plat-omap/include/plat/hwa742.h | 8 --------
drivers/video/omap/hwa742.c | 21 +++++----------------
3 files changed, 5 insertions(+), 30 deletions(-)
delete mode 100644 arch/arm/plat-omap/include/plat/hwa742.h
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index f9efc03..7155d8c 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,6 @@
#include <plat/board.h>
#include <plat/keypad.h>
#include "common.h"
-#include <plat/hwa742.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>
#include <plat/clock.h>
@@ -150,14 +149,9 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
},
};
-static struct hwa742_platform_data nokia770_hwa742_platform_data = {
- .te_connected = 1,
-};
-
static void __init hwa742_dev_init(void)
{
clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
- omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
}
/* assume no Mini-AB port */
diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
deleted file mode 100644
index 886248d..0000000
--- a/arch/arm/plat-omap/include/plat/hwa742.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _HWA742_H
-#define _HWA742_H
-
-struct hwa742_platform_data {
- unsigned te_connected:1;
-};
-
-#endif
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 084aa0a..9f1d23c 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -28,7 +28,6 @@
#include <linux/interrupt.h>
#include <plat/dma.h>
-#include <plat/hwa742.h>
#include "omapfb.h"
#define HWA742_REV_CODE_REG 0x0
@@ -942,7 +941,6 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
unsigned long sys_clk, pix_clk;
int extif_mem_div;
struct omapfb_platform_data *omapfb_conf;
- struct hwa742_platform_data *ctrl_conf;
BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl);
@@ -951,13 +949,6 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
hwa742.int_ctrl = fbdev->int_ctrl;
omapfb_conf = fbdev->dev->platform_data;
- ctrl_conf = omapfb_conf->ctrl_platform_data;
-
- if (ctrl_conf = NULL) {
- dev_err(fbdev->dev, "HWA742: missing platform data\n");
- r = -ENOENT;
- goto err1;
- }
hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
@@ -995,14 +986,12 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
goto err4;
}
- if (ctrl_conf->te_connected) {
- if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) {
- dev_err(hwa742.fbdev->dev,
- "HWA742: can't setup tearing synchronization\n");
- goto err4;
- }
- hwa742.te_connected = 1;
+ if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) {
+ dev_err(hwa742.fbdev->dev,
+ "HWA742: can't setup tearing synchronization\n");
+ goto err4;
}
+ hwa742.te_connected = 1;
hwa742.max_transmit_size = hwa742.extif->max_transmit_size;
--
1.7.4.1
^ permalink raw reply related
* [PATCH 07/16] OAMPFB: remove unused omapfb_set_ctrl_platform_data()
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
omapfb_set_ctrl_platform_data() is no longer used, so it can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/fb.c | 5 -----
include/linux/omapfb.h | 2 --
2 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 15d4d16..a05ab56 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -175,11 +175,6 @@ void __init omapfb_reserve_sdram_memblock(void)
reserved);
}
-void omapfb_set_ctrl_platform_data(void *data)
-{
- omapfb_config.ctrl_platform_data = data;
-}
-
static int __init omap_init_fb(void)
{
const struct omap_lcd_config *conf;
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index c0b0187..85cad31 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -250,12 +250,10 @@ struct omapfb_mem_desc {
struct omapfb_platform_data {
struct omap_lcd_config lcd;
struct omapfb_mem_desc mem_desc;
- void *ctrl_platform_data;
};
/* in arch/arm/plat-omap/fb.c */
extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
-extern void omapfb_set_ctrl_platform_data(void *pdata);
extern void omapfb_reserve_sdram_memblock(void);
#endif
--
1.7.4.1
^ permalink raw reply related
* [PATCH 08/16] OMAPFB: remove early mem alloc from old omapfb
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
arch/arm/plat-omap/fb.c contains code to alloc omapfb buffers at early
boot time according to information given from the bootloader or board
file.
This code isn't currently used by any board, and is anyway something
that the newer vram.c could handle. So remove the alloc code and in
later patches make old omapfb driver use vram.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/common.c | 2 -
arch/arm/plat-omap/fb.c | 140 +------------------------------------------
include/linux/omapfb.h | 1 -
3 files changed, 2 insertions(+), 141 deletions(-)
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 06383b5..2081f0f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
-#include <linux/omapfb.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -65,7 +64,6 @@ const void *__init omap_get_var_config(u16 tag, size_t *len)
void __init omap_reserve(void)
{
- omapfb_reserve_sdram_memblock();
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index a05ab56..a742b60 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -38,8 +38,6 @@
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static struct omapfb_platform_data omapfb_config;
-static int config_invalid;
-static int configured_regions;
static u64 omap_fb_dma_mask = ~(u32)0;
@@ -58,140 +56,14 @@ void omapfb_set_platform_data(struct omapfb_platform_data *data)
{
}
-static inline int ranges_overlap(unsigned long start1, unsigned long size1,
- unsigned long start2, unsigned long size2)
-{
- return (start1 >= start2 && start1 < start2 + size2) ||
- (start2 >= start1 && start2 < start1 + size1);
-}
-
-static inline int range_included(unsigned long start1, unsigned long size1,
- unsigned long start2, unsigned long size2)
-{
- return start1 >= start2 && start1 + size1 <= start2 + size2;
-}
-
-/*
- * Get the region_idx`th region from board config/ATAG and convert it to
- * our internal format.
- */
-static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
-{
- const struct omap_fbmem_config *conf;
- u32 paddr;
-
- conf = omap_get_nr_config(OMAP_TAG_FBMEM,
- struct omap_fbmem_config, region_idx);
- if (conf = NULL)
- return -ENOENT;
-
- paddr = conf->start;
- /*
- * Low bits encode the page allocation mode, if high bits
- * are zero. Otherwise we need a page aligned fixed
- * address.
- */
- memset(rg, 0, sizeof(*rg));
- rg->type = paddr & ~PAGE_MASK;
- rg->paddr = paddr & PAGE_MASK;
- rg->size = PAGE_ALIGN(conf->size);
- return 0;
-}
-
-static int valid_sdram(unsigned long addr, unsigned long size)
-{
- return memblock_is_region_memory(addr, size);
-}
-
-static int reserve_sdram(unsigned long addr, unsigned long size)
-{
- if (memblock_is_region_reserved(addr, size))
- return -EBUSY;
- if (memblock_reserve(addr, size))
- return -ENOMEM;
- return 0;
-}
-
-/*
- * Called from map_io. We need to call to this early enough so that we
- * can reserve the fixed SDRAM regions before VM could get hold of them.
- */
-void __init omapfb_reserve_sdram_memblock(void)
-{
- unsigned long reserved = 0;
- int i;
-
- if (config_invalid)
- return;
-
- for (i = 0; ; i++) {
- struct omapfb_mem_region rg;
-
- if (get_fbmem_region(i, &rg) < 0)
- break;
-
- if (i = OMAPFB_PLANE_NUM) {
- pr_err("Extraneous FB mem configuration entries\n");
- config_invalid = 1;
- return;
- }
-
- /* Check if it's our memory type. */
- if (rg.type != OMAPFB_MEMTYPE_SDRAM)
- continue;
-
- /* Check if the region falls within SDRAM */
- if (rg.paddr && !valid_sdram(rg.paddr, rg.size))
- continue;
-
- if (rg.size = 0) {
- pr_err("Zero size for FB region %d\n", i);
- config_invalid = 1;
- return;
- }
-
- if (rg.paddr) {
- if (reserve_sdram(rg.paddr, rg.size)) {
- pr_err("Trying to use reserved memory for FB region %d\n",
- i);
- config_invalid = 1;
- return;
- }
- reserved += rg.size;
- }
-
- if (omapfb_config.mem_desc.region[i].size) {
- pr_err("FB region %d already set\n", i);
- config_invalid = 1;
- return;
- }
-
- omapfb_config.mem_desc.region[i] = rg;
- configured_regions++;
- }
- omapfb_config.mem_desc.region_cnt = i;
- if (reserved)
- pr_info("Reserving %lu bytes SDRAM for frame buffer\n",
- reserved);
-}
-
static int __init omap_init_fb(void)
{
const struct omap_lcd_config *conf;
- if (config_invalid)
- return 0;
- if (configured_regions != omapfb_config.mem_desc.region_cnt) {
- printk(KERN_ERR "Invalid FB mem configuration entries\n");
- return 0;
- }
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
- if (conf = NULL) {
- if (configured_regions)
- /* FB mem config, but no LCD config? */
- printk(KERN_ERR "Missing LCD configuration\n");
+ if (conf = NULL)
return 0;
- }
+
omapfb_config.lcd = *conf;
return platform_device_register(&omap_fb_device);
@@ -227,18 +99,10 @@ static int __init omap_init_fb(void)
arch_initcall(omap_init_fb);
-void omapfb_reserve_sdram_memblock(void)
-{
-}
-
#else
void omapfb_set_platform_data(struct omapfb_platform_data *data)
{
}
-void omapfb_reserve_sdram_memblock(void)
-{
-}
-
#endif
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 85cad31..7ab9ceb 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -254,7 +254,6 @@ struct omapfb_platform_data {
/* in arch/arm/plat-omap/fb.c */
extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
-extern void omapfb_reserve_sdram_memblock(void);
#endif
--
1.7.4.1
^ permalink raw reply related
* [PATCH 09/16] OMAPFB: remove mem info from platform_data
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
omapfb driver used platform_data to get fb memory areas and formats
defined by the board file.
This patch removes omapfb's (both old and new omapfb) use of the
memory data in platform_data, because:
- No board uses them currently
- It's not board file's job to define things like amount of default
framebuffer memory. These should come from the bootloader via command
line parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/omapfb_main.c | 5 ---
drivers/video/omap2/omapfb/omapfb-main.c | 43 ------------------------------
include/linux/omapfb.h | 1 -
3 files changed, 0 insertions(+), 49 deletions(-)
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index aaf0990..3d2e147 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -157,11 +157,6 @@ static int ctrl_init(struct omapfb_device *fbdev)
fbdev->mem_desc.region[i].size PAGE_ALIGN(def_vram[i]);
fbdev->mem_desc.region_cnt = i;
- } else {
- struct omapfb_platform_data *conf;
-
- conf = fbdev->dev->platform_data;
- fbdev->mem_desc = conf->mem_desc;
}
if (!fbdev->mem_desc.region_cnt) {
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 17e7320b..4c28d57 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1614,23 +1614,6 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
memset(&vram_paddrs, 0, sizeof(vram_paddrs));
}
- if (fbdev->dev->platform_data) {
- struct omapfb_platform_data *opd;
- opd = fbdev->dev->platform_data;
- for (i = 0; i < opd->mem_desc.region_cnt; ++i) {
- if (!vram_sizes[i]) {
- unsigned long size;
- unsigned long paddr;
-
- size = opd->mem_desc.region[i].size;
- paddr = opd->mem_desc.region[i].paddr;
-
- vram_sizes[i] = size;
- vram_paddrs[i] = paddr;
- }
- }
- }
-
for (i = 0; i < fbdev->num_fbs; i++) {
/* allocate memory automatically only for fb0, or if
* excplicitly defined with vram or plat data option */
@@ -1828,32 +1811,6 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
var->rotate = def_rotate;
- /*
- * Check if there is a default color format set in the board file,
- * and use this format instead the default deducted from the
- * display bpp.
- */
- if (fbdev->dev->platform_data) {
- struct omapfb_platform_data *opd;
- int id = ofbi->id;
-
- opd = fbdev->dev->platform_data;
- if (opd->mem_desc.region[id].format_used) {
- enum omap_color_mode mode;
- enum omapfb_color_format format;
-
- format = opd->mem_desc.region[id].format;
- mode = fb_format_to_dss_mode(format);
- if (mode < 0) {
- r = mode;
- goto err;
- }
- r = dss_mode_to_fb_mode(mode, var);
- if (r < 0)
- goto err;
- }
- }
-
if (display) {
u16 w, h;
int rotation = (var->rotate + ofbi->rotation[0]) % 4;
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 7ab9ceb..03f5255 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -249,7 +249,6 @@ struct omapfb_mem_desc {
struct omapfb_platform_data {
struct omap_lcd_config lcd;
- struct omapfb_mem_desc mem_desc;
};
/* in arch/arm/plat-omap/fb.c */
--
1.7.4.1
^ permalink raw reply related
* [PATCH 10/16] OMAPFB: remove unused fb_format_to_dss_mode()
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
fb_format_to_dss_mode() function is no longer used, so remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/omapfb/omapfb-main.c | 54 ------------------------------
1 files changed, 0 insertions(+), 54 deletions(-)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 4c28d57..b00db40 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1487,60 +1487,6 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
return omapfb_alloc_fbmem(fbi, size, paddr);
}
-static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt)
-{
- enum omap_color_mode mode;
-
- switch (fmt) {
- case OMAPFB_COLOR_RGB565:
- mode = OMAP_DSS_COLOR_RGB16;
- break;
- case OMAPFB_COLOR_YUV422:
- mode = OMAP_DSS_COLOR_YUV2;
- break;
- case OMAPFB_COLOR_CLUT_8BPP:
- mode = OMAP_DSS_COLOR_CLUT8;
- break;
- case OMAPFB_COLOR_CLUT_4BPP:
- mode = OMAP_DSS_COLOR_CLUT4;
- break;
- case OMAPFB_COLOR_CLUT_2BPP:
- mode = OMAP_DSS_COLOR_CLUT2;
- break;
- case OMAPFB_COLOR_CLUT_1BPP:
- mode = OMAP_DSS_COLOR_CLUT1;
- break;
- case OMAPFB_COLOR_RGB444:
- mode = OMAP_DSS_COLOR_RGB12U;
- break;
- case OMAPFB_COLOR_YUY422:
- mode = OMAP_DSS_COLOR_UYVY;
- break;
- case OMAPFB_COLOR_ARGB16:
- mode = OMAP_DSS_COLOR_ARGB16;
- break;
- case OMAPFB_COLOR_RGB24U:
- mode = OMAP_DSS_COLOR_RGB24U;
- break;
- case OMAPFB_COLOR_RGB24P:
- mode = OMAP_DSS_COLOR_RGB24P;
- break;
- case OMAPFB_COLOR_ARGB32:
- mode = OMAP_DSS_COLOR_ARGB32;
- break;
- case OMAPFB_COLOR_RGBA32:
- mode = OMAP_DSS_COLOR_RGBA32;
- break;
- case OMAPFB_COLOR_RGBX32:
- mode = OMAP_DSS_COLOR_RGBX32;
- break;
- default:
- mode = -EINVAL;
- }
-
- return mode;
-}
-
static int omapfb_parse_vram_param(const char *param, int max_entries,
unsigned long *sizes, unsigned long *paddrs)
{
--
1.7.4.1
^ permalink raw reply related
* [PATCH 11/16] OMAPFB: Move old omapfb private structs to a private include file
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
include/linux/omapfb.h contains structs that are used only by the
omapfb driver. Move the structs into drivers/video/omap/omapfb.h.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/omapfb.h | 25 +++++++++++++++++++++++++
include/linux/omapfb.h | 25 -------------------------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index 3a5ab13..07fe498 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -47,6 +47,31 @@
struct omapfb_device;
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM 1
+#else
+#define OMAPFB_PLANE_NUM 3
+#endif
+
+struct omapfb_mem_region {
+ u32 paddr;
+ void __iomem *vaddr;
+ unsigned long size;
+ u8 type; /* OMAPFB_PLANE_MEM_* */
+ enum omapfb_color_format format;/* OMAPFB_COLOR_* */
+ unsigned format_used:1; /* Must be set when format is set.
+ * Needed b/c of the badly chosen 0
+ * base for OMAPFB_COLOR_* values
+ */
+ unsigned alloc:1; /* allocated by the driver */
+ unsigned map:1; /* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+ int region_cnt;
+ struct omapfb_mem_region region[OMAPFB_PLANE_NUM];
+};
+
struct lcd_panel {
const char *name;
int config; /* TFT/STN, signal inversion */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 03f5255..7a8e0ea 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -222,31 +222,6 @@ struct omapfb_display_info {
#include <plat/board.h>
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM 1
-#else
-#define OMAPFB_PLANE_NUM 3
-#endif
-
-struct omapfb_mem_region {
- u32 paddr;
- void __iomem *vaddr;
- unsigned long size;
- u8 type; /* OMAPFB_PLANE_MEM_* */
- enum omapfb_color_format format;/* OMAPFB_COLOR_* */
- unsigned format_used:1; /* Must be set when format is set.
- * Needed b/c of the badly chosen 0
- * base for OMAPFB_COLOR_* values
- */
- unsigned alloc:1; /* allocated by the driver */
- unsigned map:1; /* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
- int region_cnt;
- struct omapfb_mem_region region[OMAPFB_PLANE_NUM];
-};
-
struct omapfb_platform_data {
struct omap_lcd_config lcd;
};
--
1.7.4.1
^ permalink raw reply related
* [PATCH 12/16] OMAPFB: remove omapfb_set_platform_data()
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
omapfb_set_platform_data() is no longer used, so remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/fb.c | 15 ---------------
include/linux/omapfb.h | 3 ---
2 files changed, 0 insertions(+), 18 deletions(-)
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index a742b60..45f35c9 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -52,10 +52,6 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
-void omapfb_set_platform_data(struct omapfb_platform_data *data)
-{
-}
-
static int __init omap_init_fb(void)
{
const struct omap_lcd_config *conf;
@@ -87,11 +83,6 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
-void omapfb_set_platform_data(struct omapfb_platform_data *data)
-{
- omapfb_config = *data;
-}
-
static int __init omap_init_fb(void)
{
return platform_device_register(&omap_fb_device);
@@ -99,10 +90,4 @@ static int __init omap_init_fb(void)
arch_initcall(omap_init_fb);
-#else
-
-void omapfb_set_platform_data(struct omapfb_platform_data *data)
-{
-}
-
#endif
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 7a8e0ea..a575706 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -226,9 +226,6 @@ struct omapfb_platform_data {
struct omap_lcd_config lcd;
};
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
-
#endif
#endif /* __OMAPFB_H */
--
1.7.4.1
^ permalink raw reply related
* [PATCH 13/16] OMAP1: pass LCD config with omapfb_set_lcd_config()
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
LCD config for old omapfb driver is passed with OMAP_TAG_LCD from board
files or from the bootloader. In an effort to remove OMAP_TAG_LCD, this
patch adds omapfb_set_lcd_config() function that the board files can
call to set the LCD config.
This has the drawback that configuration can no longer come from the
bootloader. Of the boards supported by the kernel, this should only
affect N770 which depends on the data from the bootloader. This patch
adds an LCD config for N770 to its board files, but that is most
probably broken. Fixing this would need information about the HW setup
in N770 boards.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap1/board-ams-delta.c | 9 +++------
arch/arm/mach-omap1/board-fsample.c | 9 +++------
arch/arm/mach-omap1/board-h2.c | 9 +++------
arch/arm/mach-omap1/board-h3.c | 9 +++------
arch/arm/mach-omap1/board-htcherald.c | 9 +++------
arch/arm/mach-omap1/board-innovator.c | 11 +++--------
arch/arm/mach-omap1/board-nokia770.c | 13 +++++++------
arch/arm/mach-omap1/board-osk.c | 14 ++++++--------
arch/arm/mach-omap1/board-palmte.c | 10 +++-------
arch/arm/mach-omap1/board-palmtt.c | 10 +++-------
arch/arm/mach-omap1/board-palmz71.c | 10 +++-------
arch/arm/mach-omap1/board-perseus2.c | 9 +++------
arch/arm/mach-omap1/board-sx1.c | 10 +++-------
arch/arm/plat-omap/fb.c | 22 ++++++++++++++++------
include/linux/omapfb.h | 2 ++
15 files changed, 64 insertions(+), 92 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 88909cc..e0e8245 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
+#include <linux/omapfb.h>
#include <media/soc_camera.h>
@@ -169,10 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
.pins[0] = 2,
};
-static struct omap_board_config_kernel ams_delta_config[] __initdata = {
- { OMAP_TAG_LCD, &ams_delta_lcd_config },
-};
-
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -302,8 +299,6 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
- omap_board_config = ams_delta_config;
- omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
@@ -321,6 +316,8 @@ static void __init ams_delta_init(void)
ams_delta_init_fiq();
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
+
+ omapfb_set_lcd_config(&ams_delta_lcd_config);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 0b9464b..b00844f 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -21,6 +21,7 @@
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -290,10 +291,6 @@ static struct omap_lcd_config fsample_lcd_config = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel fsample_config[] __initdata = {
- { OMAP_TAG_LCD, &fsample_lcd_config },
-};
-
static void __init omap_fsample_init(void)
{
/* Early, board-dependent init */
@@ -352,10 +349,10 @@ static void __init omap_fsample_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
- omap_board_config = fsample_config;
- omap_board_config_size = ARRAY_SIZE(fsample_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
+
+ omapfb_set_lcd_config(&fsample_lcd_config);
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 00ad6b22..471233f 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -30,6 +30,7 @@
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
@@ -391,10 +392,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel h2_config[] __initdata = {
- { OMAP_TAG_LCD, &h2_lcd_config },
-};
-
static void __init h2_init(void)
{
h2_init_smc91x();
@@ -438,13 +435,13 @@ static void __init h2_init(void)
omap_cfg_reg(N19_1610_KBR5);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
- omap_board_config = h2_config;
- omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);
h2_mmc_init();
+
+ omapfb_set_lcd_config(&h2_lcd_config);
}
MACHINE_START(OMAP_H2, "TI-H2")
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4a7f251..7cfd25b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -30,6 +30,7 @@
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -370,10 +371,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel h3_config[] __initdata = {
- { OMAP_TAG_LCD, &h3_lcd_config },
-};
-
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65013", 0x48),
@@ -426,13 +423,13 @@ static void __init h3_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
- omap_board_config = h3_config;
- omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);
h3_mmc_init();
+
+ omapfb_set_lcd_config(&h3_lcd_config);
}
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 731cc3d..af2afcf 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -36,6 +36,7 @@
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/omapfb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -398,10 +399,6 @@ static struct omap_lcd_config htcherald_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
- { OMAP_TAG_LCD, &htcherald_lcd_config },
-};
-
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
.id = -1,
@@ -580,8 +577,6 @@ static void __init htcherald_init(void)
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
- omap_board_config = htcherald_config;
- omap_board_config_size = ARRAY_SIZE(htcherald_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
@@ -598,6 +593,8 @@ static void __init htcherald_init(void)
htc_mmc_data[0] = &htc_mmc1_data;
omap1_init_mmc(htc_mmc_data, 1);
#endif
+
+ omapfb_set_lcd_config(&htcherald_lcd_config);
}
MACHINE_START(HERALD, "HTC Herald")
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 309369e..1d5ab66 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -25,6 +25,7 @@
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -370,10 +371,6 @@ static inline void innovator_mmc_init(void)
}
#endif
-static struct omap_board_config_kernel innovator_config[] = {
- { OMAP_TAG_LCD, NULL },
-};
-
static void __init innovator_init(void)
{
if (cpu_is_omap1510())
@@ -416,17 +413,15 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
- innovator_config[1].data = &innovator1510_lcd_config;
+ omapfb_set_lcd_config(&innovator1510_lcd_config);
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
- innovator_config[1].data = &innovator1610_lcd_config;
+ omapfb_set_lcd_config(&innovator1610_lcd_config);
}
#endif
- omap_board_config = innovator_config;
- omap_board_config_size = ARRAY_SIZE(innovator_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
innovator_mmc_init();
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7155d8c..5ddb5a8 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -98,15 +98,16 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
.shutdown = mipid_shutdown,
};
+static struct omap_lcd_config nokia770_lcd_config __initdata = {
+ .ctrl_name = "hwa742",
+};
+
static void __init mipid_dev_init(void)
{
- const struct omap_lcd_config *conf;
+ nokia770_mipid_platform_data.nreset_gpio = -1;
+ nokia770_mipid_platform_data.data_lines = 16;
- conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
- if (conf != NULL) {
- nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
- nokia770_mipid_platform_data.data_lines = conf->data_lines;
- }
+ omapfb_set_lcd_config(&nokia770_lcd_config);
}
static void __init ads7846_dev_init(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 675de06..ef87465 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -34,6 +34,7 @@
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -300,12 +301,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
};
#endif
-static struct omap_board_config_kernel osk_config[] __initdata = {
-#ifdef CONFIG_OMAP_OSK_MISTRAL
- { OMAP_TAG_LCD, &osk_lcd_config },
-#endif
-};
-
#ifdef CONFIG_OMAP_OSK_MISTRAL
#include <linux/input.h>
@@ -549,8 +544,6 @@ static void __init osk_init(void)
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
- omap_board_config = osk_config;
- omap_board_config_size = ARRAY_SIZE(osk_config);
l = omap_readl(USB_TRANSCEIVER_CTRL);
l |= (3 << 1);
@@ -567,6 +560,11 @@ static void __init osk_init(void)
omap_register_i2c_bus(1, 400, osk_i2c_board_info,
ARRAY_SIZE(osk_i2c_board_info));
osk_mistral_init();
+
+#ifdef CONFIG_OMAP_OSK_MISTRAL
+ omapfb_set_lcd_config(&osk_lcd_config);
+#endif
+
}
MACHINE_START(OMAP_OSK, "TI-OSK")
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 81fa27f..612342c 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,6 +27,7 @@
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -209,10 +210,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel palmte_config[] __initdata = {
- { OMAP_TAG_LCD, &palmte_lcd_config },
-};
-
static struct spi_board_info palmte_spi_info[] __initdata = {
{
.modalias = "tsc2102",
@@ -250,9 +247,6 @@ static void __init omap_palmte_init(void)
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
- omap_board_config = palmte_config;
- omap_board_config_size = ARRAY_SIZE(palmte_config);
-
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
@@ -260,6 +254,8 @@ static void __init omap_palmte_init(void)
omap_serial_init();
omap1_usb_init(&palmte_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
+
+ omapfb_set_lcd_config(&palmte_lcd_config);
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 81cb821..b63350b 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -24,6 +24,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -273,10 +274,6 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel palmtt_config[] __initdata = {
- { OMAP_TAG_LCD, &palmtt_lcd_config },
-};
-
static void __init omap_mpu_wdt_mode(int mode) {
if (mode)
omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
@@ -298,15 +295,14 @@ static void __init omap_palmtt_init(void)
omap_mpu_wdt_mode(0);
- omap_board_config = palmtt_config;
- omap_board_config_size = ARRAY_SIZE(palmtt_config);
-
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
+
+ omapfb_set_lcd_config(&palmtt_lcd_config);
}
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e881945..9924c70 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -27,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -239,10 +240,6 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel palmz71_config[] __initdata = {
- {OMAP_TAG_LCD, &palmz71_lcd_config},
-};
-
static irqreturn_t
palmz71_powercable(int irq, void *dev_id)
{
@@ -313,9 +310,6 @@ omap_palmz71_init(void)
palmz71_gpio_setup(1);
omap_mpu_wdt_mode(0);
- omap_board_config = palmz71_config;
- omap_board_config_size = ARRAY_SIZE(palmz71_config);
-
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(palmz71_boardinfo,
@@ -324,6 +318,8 @@ omap_palmz71_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
palmz71_gpio_setup(0);
+
+ omapfb_set_lcd_config(&palmz71_lcd_config);
}
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index c000bed..44df931 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -21,6 +21,7 @@
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -249,10 +250,6 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
-static struct omap_board_config_kernel perseus2_config[] __initdata = {
- { OMAP_TAG_LCD, &perseus2_lcd_config },
-};
-
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
@@ -320,10 +317,10 @@ static void __init omap_perseus2_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
- omap_board_config = perseus2_config;
- omap_board_config_size = ARRAY_SIZE(perseus2_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
+
+ omapfb_set_lcd_config(&perseus2_lcd_config);
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 7bcd82a..0c880be 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -27,6 +27,7 @@
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/export.h>
+#include <linux/omapfb.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -371,11 +372,6 @@ static struct platform_device *sx1_devices[] __initdata = {
&sx1_lcd_device,
&sx1_irda_device,
};
-/*-----------------------------------------*/
-
-static struct omap_board_config_kernel sx1_config[] __initdata = {
- { OMAP_TAG_LCD, &sx1_lcd_config },
-};
/*-----------------------------------------*/
@@ -391,8 +387,6 @@ static void __init omap_sx1_init(void)
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
- omap_board_config = sx1_config;
- omap_board_config_size = ARRAY_SIZE(sx1_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap1_usb_init(&sx1_usb_config);
@@ -406,6 +400,8 @@ static void __init omap_sx1_init(void)
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
+
+ omapfb_set_lcd_config(&sx1_lcd_config);
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 45f35c9..24e6269 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -37,6 +37,7 @@
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+static bool omapfb_lcd_configured;
static struct omapfb_platform_data omapfb_config;
static u64 omap_fb_dma_mask = ~(u32)0;
@@ -52,16 +53,21 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
-static int __init omap_init_fb(void)
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
- const struct omap_lcd_config *conf;
+ omapfb_config.lcd = *config;
+ omapfb_lcd_configured = true;
+}
- conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
- if (conf = NULL)
+static int __init omap_init_fb(void)
+{
+ /*
+ * If the board file has not set the lcd config with
+ * omapfb_set_lcd_config(), don't bother registering the omapfb device
+ */
+ if (!omapfb_lcd_configured)
return 0;
- omapfb_config.lcd = *conf;
-
return platform_device_register(&omap_fb_device);
}
@@ -90,4 +96,8 @@ static int __init omap_init_fb(void)
arch_initcall(omap_init_fb);
+#else
+
+void __init omapfb_set_lcd_config(omap_lcd_config *config) { }
+
#endif
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index a575706..4ff57e8 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -226,6 +226,8 @@ struct omapfb_platform_data {
struct omap_lcd_config lcd;
};
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
+
#endif
#endif /* __OMAPFB_H */
--
1.7.4.1
^ permalink raw reply related
* [PATCH 14/16] OMAP: Remove OMAP_TAG_LCD and OMAP_TAG_FBMEM
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
These tags are no longer used and can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/plat-omap/include/plat/board.h | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 97126df..d5eb4c8 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -28,9 +28,7 @@ enum {
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
--
1.7.4.1
^ permalink raw reply related
* [PATCH 15/16] OMAP1: Remove unused LCD devices from board files
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
Some OMAP1 board files define LCD platform_devices, but there are no
corresponding LCD drivers for those in the kernel. Thus remove these LCD
devices.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap1/board-fsample.c | 6 ------
arch/arm/mach-omap1/board-h2.c | 6 ------
arch/arm/mach-omap1/board-perseus2.c | 6 ------
arch/arm/mach-omap1/board-sx1.c | 6 ------
4 files changed, 0 insertions(+), 24 deletions(-)
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index b00844f..7afaf3c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -274,17 +274,11 @@ static struct platform_device kp_device = {
.resource = kp_resources,
};
-static struct platform_device lcd_device = {
- .name = "lcd_p2",
- .id = -1,
-};
-
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&smc91x_device,
&kp_device,
- &lcd_device,
};
static struct omap_lcd_config fsample_lcd_config = {
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 471233f..af2be8c 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -326,18 +326,12 @@ static struct platform_device h2_irda_device = {
.resource = h2_irda_resources,
};
-static struct platform_device h2_lcd_device = {
- .name = "lcd_h2",
- .id = -1,
-};
-
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
- &h2_lcd_device,
};
static void __init h2_init_smc91x(void)
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 44df931..8e01534 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -233,17 +233,11 @@ static struct platform_device kp_device = {
.resource = kp_resources,
};
-static struct platform_device lcd_device = {
- .name = "lcd_p2",
- .id = -1,
-};
-
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&smc91x_device,
&kp_device,
- &lcd_device,
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0c880be..0c76e12 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -356,11 +356,6 @@ static struct omap_usb_config sx1_usb_config __initdata = {
/*----------- LCD -------------------------*/
-static struct platform_device sx1_lcd_device = {
- .name = "lcd_sx1",
- .id = -1,
-};
-
static struct omap_lcd_config sx1_lcd_config __initdata = {
.ctrl_name = "internal",
};
@@ -369,7 +364,6 @@ static struct omap_lcd_config sx1_lcd_config __initdata = {
static struct platform_device *sx1_devices[] __initdata = {
&sx1_flash_device,
&sx1_kp_device,
- &sx1_lcd_device,
&sx1_irda_device,
};
--
1.7.4.1
^ permalink raw reply related
* [PATCH 16/16] OMAPFB: remove remaining OMAP arch checks
From: Tomi Valkeinen @ 2012-01-24 10:00 UTC (permalink / raw)
To: linux-omap, linux-fbdev; +Cc: archit, tony, Tomi Valkeinen
In-Reply-To: <1327399231-20826-1-git-send-email-tomi.valkeinen@ti.com>
Now that the old omapfb driver is only omap1 display driver, there's no
need to check if the arch is omap1. This patch removes the few remaining
checks for the arch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/Makefile | 6 ++----
drivers/video/omap/omapfb.h | 4 ----
drivers/video/omap/omapfb_main.c | 3 +--
3 files changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 7965375..1927faf 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -4,11 +4,9 @@
obj-$(CONFIG_FB_OMAP) += omapfb.o
-objs-yy := omapfb_main.o
+objs-yy := omapfb_main.o lcdc.o
-objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
-
-objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
+objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index 07fe498..2921d20 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -47,11 +47,7 @@
struct omapfb_device;
-#ifdef CONFIG_ARCH_OMAP1
#define OMAPFB_PLANE_NUM 1
-#else
-#define OMAPFB_PLANE_NUM 3
-#endif
struct omapfb_mem_region {
u32 paddr;
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 3d2e147..f54b463 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -1741,8 +1741,7 @@ static int omapfb_do_probe(struct platform_device *pdev,
#ifdef CONFIG_FB_OMAP_DMA_TUNE
/* Set DMA priority for EMIFF access to highest */
- if (cpu_class_is_omap1())
- omap_set_dma_priority(0, OMAP_DMA_PORT_EMIFF, 15);
+ omap_set_dma_priority(0, OMAP_DMA_PORT_EMIFF, 15);
#endif
r = ctrl_change_mode(fbdev->fb_info[0]);
--
1.7.4.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox