* [PATCH 06/27] ARM: OMAP: rx51: use new display drivers
From: Tomi Valkeinen @ 2013-05-30 9:35 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Use the new display drivers for RX51 board.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 12 ++++++++++
arch/arm/mach-omap2/board-rx51-video.c | 35 ++++++++++------------------
2 files changed, 24 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 18ca61e..e35e0b6 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,8 @@
#include <linux/platform_data/tsl2563.h>
#include <linux/lis3lv02d.h>
+#include <video/omap-panel-data.h>
+
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
#include <media/ir-rx51.h>
#endif
@@ -226,6 +228,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = {
};
#endif
+#define RX51_LCD_RESET_GPIO 90
+
+static struct panel_acx565akm_platform_data acx_pdata = {
+ .name = "lcd",
+ .source = "sdi.0",
+ .reset_gpio = RX51_LCD_RESET_GPIO,
+ .datapairs = 2,
+};
+
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
};
@@ -254,6 +265,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.chip_select = 2,
.max_speed_hz = 6000000,
.controller_data = &mipid_mcspi_config,
+ .platform_data = &acx_pdata,
},
[RX51_SPI_TSC2005] = {
.modalias = "tsc2005",
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index bd74f9f..b007fd3 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -29,34 +29,21 @@
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-static struct panel_acx565akm_data lcd_data = {
- .reset_gpio = RX51_LCD_RESET_GPIO,
+static struct connector_atv_platform_data rx51_tv_pdata = {
+ .name = "tv",
+ .source = "venc.0",
+ .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+ .invert_polarity = false,
};
-static struct omap_dss_device rx51_lcd_device = {
- .name = "lcd",
- .driver_name = "panel-acx565akm",
- .type = OMAP_DISPLAY_TYPE_SDI,
- .phy.sdi.datapairs = 2,
- .data = &lcd_data,
-};
-
-static struct omap_dss_device rx51_tv_device = {
- .name = "tv",
- .type = OMAP_DISPLAY_TYPE_VENC,
- .driver_name = "venc",
- .phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
-};
-
-static struct omap_dss_device *rx51_dss_devices[] = {
- &rx51_lcd_device,
- &rx51_tv_device,
+static struct platform_device rx51_tv_device = {
+ .name = "connector-analog-tv",
+ .id = 0,
+ .dev.platform_data = &rx51_tv_pdata,
};
static struct omap_dss_board_info rx51_dss_board_info = {
- .num_devices = ARRAY_SIZE(rx51_dss_devices),
- .devices = rx51_dss_devices,
- .default_device = &rx51_lcd_device,
+ .default_display_name = "lcd",
};
static int __init rx51_video_init(void)
@@ -71,6 +58,8 @@ static int __init rx51_video_init(void)
omap_display_init(&rx51_dss_board_info);
+ platform_device_register(&rx51_tv_device);
+
return 0;
}
--
1.8.1.2
^ permalink raw reply related
* [PATCH 07/27] ARM: OMAP: beagle: use new display drivers
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Use the new display drivers for Beagleboard.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-omap3beagle.c | 56 +++++++++++++++++++++------------
1 file changed, 36 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 04c1165..30724e8 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
/* DSS */
-static struct tfp410_platform_data dvi_panel = {
- .i2c_bus_num = 3,
- .power_down_gpio = -1,
+static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
+ .name = "dvi",
+ .source = "tfp410.0",
+ .i2c_bus_num = 3,
};
-static struct omap_dss_device beagle_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "dvi",
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device beagle_dvi_connector_device = {
+ .name = "connector-dvi",
+ .id = 0,
+ .dev.platform_data = &beagle_dvi_connector_pdata,
};
-static struct omap_dss_device beagle_tv_device = {
+static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
+ .name = "tfp410.0",
+ .source = "dpi.0",
+ .data_lines = 24,
+ .power_down_gpio = -1,
+};
+
+static struct platform_device beagle_tfp410_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &beagle_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data beagle_tv_pdata = {
.name = "tv",
- .driver_name = "venc",
- .type = OMAP_DISPLAY_TYPE_VENC,
- .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .source = "venc.0",
+ .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .invert_polarity = false,
};
-static struct omap_dss_device *beagle_dss_devices[] = {
- &beagle_dvi_device,
- &beagle_tv_device,
+static struct platform_device beagle_tv_device = {
+ .name = "connector-analog-tv",
+ .id = 0,
+ .dev.platform_data = &beagle_tv_pdata,
};
static struct omap_dss_board_info beagle_dss_data = {
- .num_devices = ARRAY_SIZE(beagle_dss_devices),
- .devices = beagle_dss_devices,
- .default_device = &beagle_dvi_device,
+ .default_display_name = "dvi",
};
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -332,7 +343,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+ beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
@@ -547,6 +558,11 @@ static void __init omap3_beagle_init(void)
if (gpio_is_valid(beagle_config.dvi_pd_gpio))
omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
+
+ platform_device_register(&beagle_tfp410_device);
+ platform_device_register(&beagle_dvi_connector_device);
+ platform_device_register(&beagle_tv_device);
+
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
--
1.8.1.2
^ permalink raw reply related
* [PATCH 08/27] OMAPDSS: add OMAP_DISPLAY_TYPE_DVI
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add new display bus type for DVI. This is not used by omapdss driver
itself, but is used by external encoder chips that output DVI.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/display.c | 1 +
include/video/omapdss.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 0daf3e3..fafe7c9 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -61,6 +61,7 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
case OMAP_DISPLAY_TYPE_VENC:
case OMAP_DISPLAY_TYPE_SDI:
case OMAP_DISPLAY_TYPE_HDMI:
+ case OMAP_DISPLAY_TYPE_DVI:
return 24;
default:
BUG();
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3582edf..6796b0d 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -70,6 +70,7 @@ enum omap_display_type {
OMAP_DISPLAY_TYPE_DSI = 1 << 3,
OMAP_DISPLAY_TYPE_VENC = 1 << 4,
OMAP_DISPLAY_TYPE_HDMI = 1 << 5,
+ OMAP_DISPLAY_TYPE_DVI = 1 << 6,
};
enum omap_plane {
--
1.8.1.2
^ permalink raw reply related
* [PATCH 09/27] drm/omap: DVI connector fix
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
The omapdrm driver currently uses a string comparison to find out if the
display is a DVI display. This is not reliable, and as we now have a
specific display type for DVI, let's use that.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/gpu/drm/omapdrm/omap_drv.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index 4c0bc40..8949246 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -65,10 +65,8 @@ static int get_connector_type(struct omap_dss_device *dssdev)
switch (dssdev->type) {
case OMAP_DISPLAY_TYPE_HDMI:
return DRM_MODE_CONNECTOR_HDMIA;
- case OMAP_DISPLAY_TYPE_DPI:
- if (!strcmp(dssdev->name, "dvi"))
- return DRM_MODE_CONNECTOR_DVID;
- /* fallthrough */
+ case OMAP_DISPLAY_TYPE_DVI:
+ return DRM_MODE_CONNECTOR_DVID;
default:
return DRM_MODE_CONNECTOR_Unknown;
}
--
1.8.1.2
^ permalink raw reply related
* [PATCH 10/27] OMAPDSS: DPI: Add ops
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add "ops" style method for using DPI functionality.
Ops style calls will allow us to have arbitrarily long display
pipelines, where each entity can call ops in the previous display
entity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dpi.c | 70 +++++++++++++++++++++++++++++++++++++++++++
include/video/omapdss.h | 23 ++++++++++++++
2 files changed, 93 insertions(+)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 3299e27..a7d40dd 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -462,6 +462,16 @@ void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
}
EXPORT_SYMBOL(omapdss_dpi_set_timings);
+static void dpi_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ mutex_lock(&dpi.lock);
+
+ *timings = dpi.timings;
+
+ mutex_unlock(&dpi.lock);
+}
+
int dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
@@ -682,6 +692,65 @@ static int dpi_probe_pdata(struct platform_device *dpidev)
return 0;
}
+static int dpi_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct omap_overlay_manager *mgr;
+ int r;
+
+ r = dpi_init_regulator();
+ if (r)
+ return r;
+
+ dpi_init_pll();
+
+ mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+ if (!mgr)
+ return -ENODEV;
+
+ r = dss_mgr_connect(mgr, dssdev);
+ if (r)
+ return r;
+
+ r = omapdss_output_set_device(dssdev, dst);
+ if (r) {
+ DSSERR("failed to connect output to new device: %s\n",
+ dst->name);
+ dss_mgr_disconnect(mgr, dssdev);
+ return r;
+ }
+
+ return 0;
+}
+
+static void dpi_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ WARN_ON(dst != dssdev->device);
+
+ if (dst != dssdev->device)
+ return;
+
+ omapdss_output_unset_device(dssdev);
+
+ if (dssdev->manager)
+ dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static const struct omapdss_dpi_ops dpi_ops = {
+ .connect = dpi_connect,
+ .disconnect = dpi_disconnect,
+
+ .enable = omapdss_dpi_display_enable,
+ .disable = omapdss_dpi_display_disable,
+
+ .check_timings = dpi_check_timings,
+ .set_timings = omapdss_dpi_set_timings,
+ .get_timings = dpi_get_timings,
+
+ .set_data_lines = omapdss_dpi_set_data_lines,
+};
+
static void dpi_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &dpi.output;
@@ -691,6 +760,7 @@ static void dpi_init_output(struct platform_device *pdev)
out->output_type = OMAP_DISPLAY_TYPE_DPI;
out->name = "dpi.0";
out->dispc_channel = dpi_get_channel();
+ out->ops.dpi = &dpi_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 6796b0d..d458e43 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -573,6 +573,25 @@ struct omap_dss_writeback_info {
u8 pre_mult_alpha;
};
+struct omapdss_dpi_ops {
+ int (*connect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+ void (*disconnect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+
+ int (*enable)(struct omap_dss_device *dssdev);
+ void (*disable)(struct omap_dss_device *dssdev);
+
+ int (*check_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*set_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*get_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+
+ void (*set_data_lines)(struct omap_dss_device *dssdev, int data_lines);
+};
+
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
@@ -645,6 +664,10 @@ struct omap_dss_device {
struct omap_dss_driver *driver;
+ union {
+ const struct omapdss_dpi_ops *dpi;
+ } ops;
+
/* helper variable for driver suspend/resume */
bool activate_after_resume;
--
1.8.1.2
^ permalink raw reply related
* [PATCH 11/27] OMAPDSS: SDI: Add ops
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add "ops" style method for using SDI functionality.
Ops style calls will allow us to have arbitrarily long display
pipelines, where each entity can call ops in the previous display
entity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/sdi.c | 78 +++++++++++++++++++++++++++++++++++++++++++
include/video/omapdss.h | 20 +++++++++++
2 files changed, 98 insertions(+)
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0343d08..a676864 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -235,6 +235,26 @@ void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
}
EXPORT_SYMBOL(omapdss_sdi_set_timings);
+static void sdi_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ *timings = sdi.timings;
+}
+
+static int sdi_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct omap_overlay_manager *mgr = sdi.output.manager;
+
+ if (mgr && !dispc_mgr_timings_ok(mgr->id, timings))
+ return -EINVAL;
+
+ if (timings->pixel_clock = 0)
+ return -EINVAL;
+
+ return 0;
+}
+
void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs)
{
sdi.datapairs = datapairs;
@@ -339,6 +359,63 @@ static int sdi_probe_pdata(struct platform_device *sdidev)
return 0;
}
+static int sdi_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct omap_overlay_manager *mgr;
+ int r;
+
+ r = sdi_init_regulator();
+ if (r)
+ return r;
+
+ mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+ if (!mgr)
+ return -ENODEV;
+
+ r = dss_mgr_connect(mgr, dssdev);
+ if (r)
+ return r;
+
+ r = omapdss_output_set_device(dssdev, dst);
+ if (r) {
+ DSSERR("failed to connect output to new device: %s\n",
+ dst->name);
+ dss_mgr_disconnect(mgr, dssdev);
+ return r;
+ }
+
+ return 0;
+}
+
+static void sdi_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ WARN_ON(dst != dssdev->device);
+
+ if (dst != dssdev->device)
+ return;
+
+ omapdss_output_unset_device(dssdev);
+
+ if (dssdev->manager)
+ dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static const struct omapdss_sdi_ops sdi_ops = {
+ .connect = sdi_connect,
+ .disconnect = sdi_disconnect,
+
+ .enable = omapdss_sdi_display_enable,
+ .disable = omapdss_sdi_display_disable,
+
+ .check_timings = sdi_check_timings,
+ .set_timings = omapdss_sdi_set_timings,
+ .get_timings = sdi_get_timings,
+
+ .set_datapairs = omapdss_sdi_set_datapairs,
+};
+
static void sdi_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &sdi.output;
@@ -348,6 +425,7 @@ static void sdi_init_output(struct platform_device *pdev)
out->output_type = OMAP_DISPLAY_TYPE_SDI;
out->name = "sdi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
+ out->ops.sdi = &sdi_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index d458e43..79e9ec8 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -592,6 +592,25 @@ struct omapdss_dpi_ops {
void (*set_data_lines)(struct omap_dss_device *dssdev, int data_lines);
};
+struct omapdss_sdi_ops {
+ int (*connect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+ void (*disconnect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+
+ int (*enable)(struct omap_dss_device *dssdev);
+ void (*disable)(struct omap_dss_device *dssdev);
+
+ int (*check_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*set_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*get_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+
+ void (*set_datapairs)(struct omap_dss_device *dssdev, int datapairs);
+};
+
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
@@ -666,6 +685,7 @@ struct omap_dss_device {
union {
const struct omapdss_dpi_ops *dpi;
+ const struct omapdss_sdi_ops *sdi;
} ops;
/* helper variable for driver suspend/resume */
--
1.8.1.2
^ permalink raw reply related
* [PATCH 12/27] OMAPDSS: DVI: Add ops
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add "ops" style method for using DVI functionality.
Ops style calls will allow us to have arbitrarily long display
pipelines, where each entity can call ops in the previous display
entity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
include/video/omapdss.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 79e9ec8..9f87fc0 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -611,6 +611,23 @@ struct omapdss_sdi_ops {
void (*set_datapairs)(struct omap_dss_device *dssdev, int datapairs);
};
+struct omapdss_dvi_ops {
+ int (*connect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+ void (*disconnect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+
+ int (*enable)(struct omap_dss_device *dssdev);
+ void (*disable)(struct omap_dss_device *dssdev);
+
+ int (*check_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*set_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*get_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+};
+
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
@@ -686,6 +703,7 @@ struct omap_dss_device {
union {
const struct omapdss_dpi_ops *dpi;
const struct omapdss_sdi_ops *sdi;
+ const struct omapdss_dvi_ops *dvi;
} ops;
/* helper variable for driver suspend/resume */
--
1.8.1.2
^ permalink raw reply related
* [PATCH 13/27] OMAPDSS: AnalogTV: Add ops
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add "ops" style method for using analog TV functionality.
Ops style calls will allow us to have arbitrarily long display
pipelines, where each entity can call ops in the previous display
entity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/venc.c | 72 ++++++++++++++++++++++++++++++++++++++++++
include/video/omapdss.h | 26 +++++++++++++++
2 files changed, 98 insertions(+)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 291a40d..f5ee767 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -568,6 +568,16 @@ int omapdss_venc_check_timings(struct omap_dss_device *dssdev,
return -EINVAL;
}
+static void venc_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ mutex_lock(&venc.venc_lock);
+
+ *timings = venc.timings;
+
+ mutex_unlock(&venc.venc_lock);
+}
+
u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev)
{
/* Invert due to VENC_L21_WC_CTL:INV=1 */
@@ -783,6 +793,67 @@ static int venc_probe_pdata(struct platform_device *vencdev)
return 0;
}
+static int venc_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct omap_overlay_manager *mgr;
+ int r;
+
+ r = venc_init_regulator();
+ if (r)
+ return r;
+
+ mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+ if (!mgr)
+ return -ENODEV;
+
+ r = dss_mgr_connect(mgr, dssdev);
+ if (r)
+ return r;
+
+ r = omapdss_output_set_device(dssdev, dst);
+ if (r) {
+ DSSERR("failed to connect output to new device: %s\n",
+ dst->name);
+ dss_mgr_disconnect(mgr, dssdev);
+ return r;
+ }
+
+ return 0;
+}
+
+static void venc_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ WARN_ON(dst != dssdev->device);
+
+ if (dst != dssdev->device)
+ return;
+
+ omapdss_output_unset_device(dssdev);
+
+ if (dssdev->manager)
+ dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static const struct omapdss_atv_ops venc_ops = {
+ .connect = venc_connect,
+ .disconnect = venc_disconnect,
+
+ .enable = omapdss_venc_display_enable,
+ .disable = omapdss_venc_display_disable,
+
+ .check_timings = omapdss_venc_check_timings,
+ .set_timings = omapdss_venc_set_timings,
+ .get_timings = venc_get_timings,
+
+ .set_type = omapdss_venc_set_type,
+ .invert_vid_out_polarity = omapdss_venc_invert_vid_out_polarity,
+
+ .set_wss = omapdss_venc_set_wss,
+ .get_wss = omapdss_venc_get_wss,
+};
+
static void venc_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &venc.output;
@@ -792,6 +863,7 @@ static void venc_init_output(struct platform_device *pdev)
out->output_type = OMAP_DISPLAY_TYPE_VENC;
out->name = "venc.0";
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
+ out->ops.atv = &venc_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 9f87fc0..cb6c478 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -628,6 +628,31 @@ struct omapdss_dvi_ops {
struct omap_video_timings *timings);
};
+struct omapdss_atv_ops {
+ int (*connect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+ void (*disconnect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+
+ int (*enable)(struct omap_dss_device *dssdev);
+ void (*disable)(struct omap_dss_device *dssdev);
+
+ int (*check_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*set_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*get_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+
+ void (*set_type)(struct omap_dss_device *dssdev,
+ enum omap_dss_venc_type type);
+ void (*invert_vid_out_polarity)(struct omap_dss_device *dssdev,
+ bool invert_polarity);
+
+ int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+ u32 (*get_wss)(struct omap_dss_device *dssdev);
+};
+
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
@@ -704,6 +729,7 @@ struct omap_dss_device {
const struct omapdss_dpi_ops *dpi;
const struct omapdss_sdi_ops *sdi;
const struct omapdss_dvi_ops *dvi;
+ const struct omapdss_atv_ops *atv;
} ops;
/* helper variable for driver suspend/resume */
--
1.8.1.2
^ permalink raw reply related
* [PATCH 14/27] OMAPDSS: HDMI: Add ops
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add "ops" style method for using HDMI functionality.
Ops style calls will allow us to have arbitrarily long display
pipelines, where each entity can call ops in the previous display
entity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/hdmi.c | 248 ++++++++++++++++++++++++++++++++++++++++-
include/video/omapdss.h | 47 +++++++-
2 files changed, 284 insertions(+), 11 deletions(-)
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 42376d1..9420923 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -70,6 +70,8 @@ static struct {
int ls_oe_gpio;
int hpd_gpio;
+ bool core_enabled;
+
struct omap_dss_device output;
} hdmi;
@@ -521,8 +523,10 @@ static int hdmi_power_on_core(struct omap_dss_device *dssdev)
{
int r;
- gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
- gpio_set_value(hdmi.ls_oe_gpio, 1);
+ if (gpio_is_valid(hdmi.ct_cp_hpd_gpio))
+ gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
+ if (gpio_is_valid(hdmi.ls_oe_gpio))
+ gpio_set_value(hdmi.ls_oe_gpio, 1);
/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
udelay(300);
@@ -538,22 +542,30 @@ static int hdmi_power_on_core(struct omap_dss_device *dssdev)
/* Make selection of HDMI in DSS */
dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
+ hdmi.core_enabled = true;
+
return 0;
err_runtime_get:
regulator_disable(hdmi.vdda_hdmi_dac_reg);
err_vdac_enable:
- gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
- gpio_set_value(hdmi.ls_oe_gpio, 0);
+ if (gpio_is_valid(hdmi.ct_cp_hpd_gpio))
+ gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
+ if (gpio_is_valid(hdmi.ls_oe_gpio))
+ gpio_set_value(hdmi.ls_oe_gpio, 0);
return r;
}
static void hdmi_power_off_core(struct omap_dss_device *dssdev)
{
+ hdmi.core_enabled = false;
+
hdmi_runtime_put();
regulator_disable(hdmi.vdda_hdmi_dac_reg);
- gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
- gpio_set_value(hdmi.ls_oe_gpio, 0);
+ if (gpio_is_valid(hdmi.ct_cp_hpd_gpio))
+ gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
+ if (gpio_is_valid(hdmi.ls_oe_gpio))
+ gpio_set_value(hdmi.ls_oe_gpio, 0);
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
@@ -666,6 +678,18 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
mutex_unlock(&hdmi.lock);
}
+static void omapdss_hdmi_display_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ const struct hdmi_config *cfg;
+
+ cfg = hdmi_get_timings();
+ if (cfg = NULL)
+ cfg = &vesa_timings[0];
+
+ memcpy(timings, &cfg->timings, sizeof(cfg->timings));
+}
+
static void hdmi_dump_regs(struct seq_file *s)
{
mutex_lock(&hdmi.lock);
@@ -1033,6 +1057,213 @@ static int hdmi_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int hdmi_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct omap_overlay_manager *mgr;
+ int r;
+
+ dss_init_hdmi_ip_ops(&hdmi.ip_data, omapdss_get_version());
+
+ r = hdmi_init_regulator();
+ if (r)
+ return r;
+
+ mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+ if (!mgr)
+ return -ENODEV;
+
+ r = dss_mgr_connect(mgr, dssdev);
+ if (r)
+ return r;
+
+ r = omapdss_output_set_device(dssdev, dst);
+ if (r) {
+ DSSERR("failed to connect output to new device: %s\n",
+ dst->name);
+ dss_mgr_disconnect(mgr, dssdev);
+ return r;
+ }
+
+ return 0;
+}
+
+static void hdmi_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ WARN_ON(dst != dssdev->device);
+
+ if (dst != dssdev->device)
+ return;
+
+ omapdss_output_unset_device(dssdev);
+
+ if (dssdev->manager)
+ dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static void omapdss_hdmi_set_hpd_gpio(struct omap_dss_device *dssdev,
+ int hpd_gpio)
+{
+ hdmi.hpd_gpio = hpd_gpio;
+}
+
+static int hdmi_read_edid(struct omap_dss_device *dssdev,
+ u8 *edid, int len)
+{
+ bool need_enable;
+ int r;
+
+ need_enable = hdmi.core_enabled = false;
+
+ if (need_enable) {
+ r = omapdss_hdmi_core_enable(dssdev);
+ if (r)
+ return r;
+ }
+
+ r = omapdss_hdmi_read_edid(edid, len);
+
+ if (need_enable)
+ omapdss_hdmi_core_disable(dssdev);
+
+ return r;
+}
+
+static bool hdmi_detect(struct omap_dss_device *dssdev)
+{
+ return omapdss_hdmi_detect();
+}
+
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+static int omapdss_hdmi_audio_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ mutex_lock(&hdmi.lock);
+
+ if (!hdmi_mode_has_audio()) {
+ r = -EPERM;
+ goto err;
+ }
+
+ r = hdmi_audio_enable();
+ if (r)
+ goto err;
+
+ mutex_unlock(&hdmi.lock);
+ return 0;
+
+err:
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+
+static void omapdss_hdmi_audio_disable(struct omap_dss_device *dssdev)
+{
+ hdmi_audio_disable();
+}
+
+static int omapdss_hdmi_audio_start(struct omap_dss_device *dssdev)
+{
+ return hdmi_audio_start();
+}
+
+static void omapdss_hdmi_audio_stop(struct omap_dss_device *dssdev)
+{
+ hdmi_audio_stop();
+}
+
+static bool omapdss_hdmi_audio_supported(struct omap_dss_device *dssdev)
+{
+ bool r;
+
+ mutex_lock(&hdmi.lock);
+
+ r = hdmi_mode_has_audio();
+
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+
+static int omapdss_hdmi_audio_config(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio)
+{
+ int r;
+
+ mutex_lock(&hdmi.lock);
+
+ if (!hdmi_mode_has_audio()) {
+ r = -EPERM;
+ goto err;
+ }
+
+ r = hdmi_audio_config(audio);
+ if (r)
+ goto err;
+
+ mutex_unlock(&hdmi.lock);
+ return 0;
+
+err:
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+#else
+static int omapdss_hdmi_audio_enable(struct omap_dss_device *dssdev)
+{
+ return -EPERM;
+}
+
+static void omapdss_hdmi_audio_disable(struct omap_dss_device *dssdev)
+{
+}
+
+static int omapdss_hdmi_audio_start(struct omap_dss_device *dssdev)
+{
+ return -EPERM;
+}
+
+static void omapdss_hdmi_audio_stop(struct omap_dss_device *dssdev)
+{
+}
+
+static bool omapdss_hdmi_audio_supported(struct omap_dss_device *dssdev)
+{
+ return false;
+}
+
+static int omapdss_hdmi_audio_config(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio)
+{
+ return -EPERM;
+}
+#endif
+
+static const struct omapdss_hdmi_ops hdmi_ops = {
+ .connect = hdmi_connect,
+ .disconnect = hdmi_disconnect,
+
+ .enable = omapdss_hdmi_display_enable,
+ .disable = omapdss_hdmi_display_disable,
+
+ .check_timings = omapdss_hdmi_display_check_timing,
+ .set_timings = omapdss_hdmi_display_set_timing,
+ .get_timings = omapdss_hdmi_display_get_timings,
+
+ .set_hpd_gpio = omapdss_hdmi_set_hpd_gpio,
+
+ .read_edid = hdmi_read_edid,
+ .detect = hdmi_detect,
+
+ .audio_enable = omapdss_hdmi_audio_enable,
+ .audio_disable = omapdss_hdmi_audio_disable,
+ .audio_start = omapdss_hdmi_audio_start,
+ .audio_stop = omapdss_hdmi_audio_stop,
+ .audio_supported = omapdss_hdmi_audio_supported,
+ .audio_config = omapdss_hdmi_audio_config,
+};
+
static void hdmi_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &hdmi.output;
@@ -1042,6 +1273,7 @@ static void hdmi_init_output(struct platform_device *pdev)
out->output_type = OMAP_DISPLAY_TYPE_HDMI;
out->name = "hdmi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
+ out->ops.hdmi = &hdmi_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
@@ -1089,6 +1321,10 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
hdmi.ip_data.phy_offset = HDMI_PHY;
+ hdmi.ct_cp_hpd_gpio = -1;
+ hdmi.ls_oe_gpio = -1;
+ hdmi.hpd_gpio = -1;
+
hdmi_init_output(pdev);
r = hdmi_panel_init();
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index cb6c478..f0aee54 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -172,6 +172,11 @@ enum omap_dss_audio_state {
OMAP_DSS_AUDIO_PLAYING,
};
+struct omap_dss_audio {
+ struct snd_aes_iec958 *iec;
+ struct snd_cea_861_aud_if *cea;
+};
+
enum omap_dss_rotation_type {
OMAP_DSS_ROT_DMA = 1 << 0,
OMAP_DSS_ROT_VRFB = 1 << 1,
@@ -653,6 +658,42 @@ struct omapdss_atv_ops {
u32 (*get_wss)(struct omap_dss_device *dssdev);
};
+struct omapdss_hdmi_ops {
+ int (*connect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+ void (*disconnect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+
+ int (*enable)(struct omap_dss_device *dssdev);
+ void (*disable)(struct omap_dss_device *dssdev);
+
+ int (*check_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*set_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+ void (*get_timings)(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
+
+ void (*set_hpd_gpio)(struct omap_dss_device *dssdev,
+ int hpd_gpio);
+
+ int (*read_edid)(struct omap_dss_device *dssdev, u8 *buf, int len);
+ bool (*detect)(struct omap_dss_device *dssdev);
+
+ /*
+ * Note: These functions might sleep. Do not call while
+ * holding a spinlock/readlock.
+ */
+ int (*audio_enable)(struct omap_dss_device *dssdev);
+ void (*audio_disable)(struct omap_dss_device *dssdev);
+ bool (*audio_supported)(struct omap_dss_device *dssdev);
+ int (*audio_config)(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio);
+ /* Note: These functions may not sleep */
+ int (*audio_start)(struct omap_dss_device *dssdev);
+ void (*audio_stop)(struct omap_dss_device *dssdev);
+};
+
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
@@ -729,6 +770,7 @@ struct omap_dss_device {
const struct omapdss_dpi_ops *dpi;
const struct omapdss_sdi_ops *sdi;
const struct omapdss_dvi_ops *dvi;
+ const struct omapdss_hdmi_ops *hdmi;
const struct omapdss_atv_ops *atv;
} ops;
@@ -773,11 +815,6 @@ struct omap_dss_hdmi_data
int hpd_gpio;
};
-struct omap_dss_audio {
- struct snd_aes_iec958 *iec;
- struct snd_cea_861_aud_if *cea;
-};
-
struct omap_dss_driver {
struct device_driver driver;
--
1.8.1.2
^ permalink raw reply related
* [PATCH 15/27] OMAPDSS: DSI: Add ops
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add "ops" style method for using DSI functionality.
Ops style calls will allow us to have arbitrarily long display
pipelines, where each entity can call ops in the previous display
entity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dsi.c | 93 +++++++++++++++++++++++++++++++++++++++++++
include/video/omapdss.h | 58 +++++++++++++++++++++++++++
2 files changed, 151 insertions(+)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 4ecc0c1..a6b7d85 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -383,6 +383,15 @@ static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dside
static inline struct platform_device *dsi_get_dsidev_from_dssdev(struct omap_dss_device *dssdev)
{
+ /* HACK: dssdev can be either the panel device, when using old API, or
+ * the dsi device itself, when using the new API. So we solve this for
+ * now by checking the dssdev->id. This will be removed when the old API
+ * is removed.
+ */
+ if (dssdev->id = OMAP_DSS_OUTPUT_DSI1 ||
+ dssdev->id = OMAP_DSS_OUTPUT_DSI2)
+ return to_platform_device(dssdev->dev);
+
return to_platform_device(dssdev->output->dev);
}
@@ -5412,6 +5421,89 @@ static int dsi_probe_pdata(struct platform_device *dsidev)
return 0;
}
+static int dsi_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ struct omap_overlay_manager *mgr;
+ int r;
+
+ r = dsi_regulator_init(dsidev);
+ if (r)
+ return r;
+
+ mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+ if (!mgr)
+ return -ENODEV;
+
+ r = dss_mgr_connect(mgr, dssdev);
+ if (r)
+ return r;
+
+ r = omapdss_output_set_device(dssdev, dst);
+ if (r) {
+ DSSERR("failed to connect output to new device: %s\n",
+ dssdev->name);
+ dss_mgr_disconnect(mgr, dssdev);
+ return r;
+ }
+
+ return 0;
+}
+
+static void dsi_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ WARN_ON(dst != dssdev->device);
+
+ if (dst != dssdev->device)
+ return;
+
+ omapdss_output_unset_device(dssdev);
+
+ if (dssdev->manager)
+ dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static const struct omapdss_dsi_ops dsi_ops = {
+ .connect = dsi_connect,
+ .disconnect = dsi_disconnect,
+
+ .bus_lock = dsi_bus_lock,
+ .bus_unlock = dsi_bus_unlock,
+
+ .enable = omapdss_dsi_display_enable,
+ .disable = omapdss_dsi_display_disable,
+
+ .enable_hs = omapdss_dsi_vc_enable_hs,
+
+ .configure_pins = omapdss_dsi_configure_pins,
+ .set_config = omapdss_dsi_set_config,
+
+ .enable_video_output = dsi_enable_video_output,
+ .disable_video_output = dsi_disable_video_output,
+
+ .update = omap_dsi_update,
+
+ .enable_te = omapdss_dsi_enable_te,
+
+ .request_vc = omap_dsi_request_vc,
+ .set_vc_id = omap_dsi_set_vc_id,
+ .release_vc = omap_dsi_release_vc,
+
+ .dcs_write = dsi_vc_dcs_write,
+ .dcs_write_nosync = dsi_vc_dcs_write_nosync,
+ .dcs_read = dsi_vc_dcs_read,
+
+ .gen_write = dsi_vc_generic_write,
+ .gen_write_nosync = dsi_vc_generic_write_nosync,
+ .gen_read = dsi_vc_generic_read,
+
+ .bta_sync = dsi_vc_send_bta_sync,
+
+ .set_max_rx_packet_size = dsi_vc_set_max_rx_packet_size,
+};
+
static void dsi_init_output(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@@ -5424,6 +5516,7 @@ static void dsi_init_output(struct platform_device *dsidev)
out->output_type = OMAP_DISPLAY_TYPE_DSI;
out->name = dsi->module_id = 0 ? "dsi.0" : "dsi.1";
out->dispc_channel = dsi_get_channel(dsi->module_id);
+ out->ops.dsi = &dsi_ops;
out->owner = THIS_MODULE;
omapdss_register_output(out);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index f0aee54..f8c26c5 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -694,6 +694,63 @@ struct omapdss_hdmi_ops {
void (*audio_stop)(struct omap_dss_device *dssdev);
};
+struct omapdss_dsi_ops {
+ int (*connect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+ void (*disconnect)(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst);
+
+ int (*enable)(struct omap_dss_device *dssdev);
+ void (*disable)(struct omap_dss_device *dssdev, bool disconnect_lanes,
+ bool enter_ulps);
+
+ /* bus configuration */
+ int (*set_config)(struct omap_dss_device *dssdev,
+ const struct omap_dss_dsi_config *cfg);
+ int (*configure_pins)(struct omap_dss_device *dssdev,
+ const struct omap_dsi_pin_config *pin_cfg);
+
+ void (*enable_hs)(struct omap_dss_device *dssdev, int channel,
+ bool enable);
+ int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+
+ int (*update)(struct omap_dss_device *dssdev, int channel,
+ void (*callback)(int, void *), void *data);
+
+ void (*bus_lock)(struct omap_dss_device *dssdev);
+ void (*bus_unlock)(struct omap_dss_device *dssdev);
+
+ int (*enable_video_output)(struct omap_dss_device *dssdev, int channel);
+ void (*disable_video_output)(struct omap_dss_device *dssdev,
+ int channel);
+
+ int (*request_vc)(struct omap_dss_device *dssdev, int *channel);
+ int (*set_vc_id)(struct omap_dss_device *dssdev, int channel,
+ int vc_id);
+ void (*release_vc)(struct omap_dss_device *dssdev, int channel);
+
+ /* data transfer */
+ int (*dcs_write)(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len);
+ int (*dcs_write_nosync)(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len);
+ int (*dcs_read)(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
+ u8 *data, int len);
+
+ int (*gen_write)(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len);
+ int (*gen_write_nosync)(struct omap_dss_device *dssdev, int channel,
+ u8 *data, int len);
+ int (*gen_read)(struct omap_dss_device *dssdev, int channel,
+ u8 *reqdata, int reqlen,
+ u8 *data, int len);
+
+ int (*bta_sync)(struct omap_dss_device *dssdev, int channel);
+
+ int (*set_max_rx_packet_size)(struct omap_dss_device *dssdev,
+ int channel, u16 plen);
+};
+
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
@@ -772,6 +829,7 @@ struct omap_dss_device {
const struct omapdss_dvi_ops *dvi;
const struct omapdss_hdmi_ops *hdmi;
const struct omapdss_atv_ops *atv;
+ const struct omapdss_dsi_ops *dsi;
} ops;
/* helper variable for driver suspend/resume */
--
1.8.1.2
^ permalink raw reply related
* [PATCH 16/27] OMAPDSS: Add new TFP410 Encoder driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add TFP410 DPI-to-DVI Encoder driver which uses the new DSS device
model and DSS ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/Kconfig | 1 +
drivers/video/omap2/Makefile | 1 +
drivers/video/omap2/displays-new/Kconfig | 9 +
drivers/video/omap2/displays-new/Makefile | 1 +
drivers/video/omap2/displays-new/encoder-tfp410.c | 270 ++++++++++++++++++++++
5 files changed, 282 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/Kconfig
create mode 100644 drivers/video/omap2/displays-new/Makefile
create mode 100644 drivers/video/omap2/displays-new/encoder-tfp410.c
diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
index b07b2b0..56cad0f 100644
--- a/drivers/video/omap2/Kconfig
+++ b/drivers/video/omap2/Kconfig
@@ -6,5 +6,6 @@ if ARCH_OMAP2PLUS
source "drivers/video/omap2/dss/Kconfig"
source "drivers/video/omap2/omapfb/Kconfig"
source "drivers/video/omap2/displays/Kconfig"
+source "drivers/video/omap2/displays-new/Kconfig"
endif
diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
index 296e5c5..86873c2 100644
--- a/drivers/video/omap2/Makefile
+++ b/drivers/video/omap2/Makefile
@@ -2,4 +2,5 @@ obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
obj-$(CONFIG_OMAP2_DSS) += dss/
obj-y += displays/
+obj-y += displays-new/
obj-$(CONFIG_FB_OMAP2) += omapfb/
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
new file mode 100644
index 0000000..92c2324
--- /dev/null
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -0,0 +1,9 @@
+menu "OMAP Display Device Drivers"
+ depends on OMAP2_DSS
+
+config DISPLAY_ENCODER_TFP410
+ tristate "TFP410 DPI to DVI Encoder"
+ help
+ Driver for TFP410 DPI to DVI encoder.
+
+endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
new file mode 100644
index 0000000..b0d3457
--- /dev/null
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/omap2/displays-new/encoder-tfp410.c
new file mode 100644
index 0000000..5fff526
--- /dev/null
+++ b/drivers/video/omap2/displays-new/encoder-tfp410.c
@@ -0,0 +1,270 @@
+/*
+ * TFP410 DPI-to-DVI encoder driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ int pd_gpio;
+ int data_lines;
+
+ struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tfp410_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return -EBUSY;
+
+ r = in->ops.dpi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ dst->output = dssdev;
+ dssdev->device = dst;
+
+ return 0;
+}
+
+static void tfp410_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ WARN_ON(!omapdss_device_is_connected(dssdev));
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ WARN_ON(dst != dssdev->device);
+ if (dst != dssdev->device)
+ return;
+
+ dst->output = NULL;
+ dssdev->device = NULL;
+
+ in->ops.dpi->disconnect(in, &ddata->dssdev);
+}
+
+static int tfp410_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.dpi->set_timings(in, &ddata->timings);
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
+
+ r = in->ops.dpi->enable(in);
+ if (r)
+ return r;
+
+ if (gpio_is_valid(ddata->pd_gpio))
+ gpio_set_value_cansleep(ddata->pd_gpio, 1);
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void tfp410_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ if (gpio_is_valid(ddata->pd_gpio))
+ gpio_set_value_cansleep(ddata->pd_gpio, 0);
+
+ in->ops.dpi->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->timings = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.dpi->set_timings(in, timings);
+}
+
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->timings;
+}
+
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.dpi->check_timings(in, timings);
+}
+
+static const struct omapdss_dvi_ops tfp410_dvi_ops = {
+ .connect = tfp410_connect,
+ .disconnect = tfp410_disconnect,
+
+ .enable = tfp410_enable,
+ .disable = tfp410_disable,
+
+ .check_timings = tfp410_check_timings,
+ .set_timings = tfp410_set_timings,
+ .get_timings = tfp410_get_timings,
+};
+
+static int tfp410_probe_pdata(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct encoder_tfp410_platform_data *pdata;
+ struct omap_dss_device *dssdev, *in;
+ int r, gpio;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ gpio = pdata->power_down_gpio;
+
+ if (gpio_is_valid(gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, gpio,
+ GPIOF_OUT_INIT_LOW, "tfp410 pd");
+ if (r) {
+ dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
+ gpio);
+ return r;
+ }
+
+ ddata->pd_gpio = gpio;
+ } else {
+ ddata->pd_gpio = -1;
+ }
+
+ ddata->data_lines = pdata->data_lines;
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "Failed to find video source\n");
+ return -ENODEV;
+ }
+
+ ddata->in = in;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int tfp410_probe(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = tfp410_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ dssdev = &ddata->dssdev;
+ dssdev->ops.dvi = &tfp410_dvi_ops;
+ dssdev->dev = &pdev->dev;
+ dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+ r = omapdss_register_output(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register output\n");
+ goto err_reg;
+ }
+
+ return 0;
+err_reg:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int __exit tfp410_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_output(&ddata->dssdev);
+
+ WARN_ON(omapdss_device_is_enabled(dssdev));
+ if (omapdss_device_is_enabled(dssdev))
+ tfp410_disable(dssdev);
+
+ WARN_ON(omapdss_device_is_connected(dssdev));
+ if (omapdss_device_is_connected(dssdev))
+ tfp410_disconnect(dssdev, dssdev->device);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct platform_driver tfp410_driver = {
+ .probe = tfp410_probe,
+ .remove = __exit_p(tfp410_remove),
+ .driver = {
+ .name = "tfp410",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(tfp410_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 17/27] OMAPDSS: Add new TPD12S015 Encoder driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add TPD12S015 HDMI ESD protection and level shifter encoder driver which
uses the new DSS device model and DSS ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 6 +
drivers/video/omap2/displays-new/Makefile | 1 +
.../video/omap2/displays-new/encoder-tpd12s015.c | 395 +++++++++++++++++++++
3 files changed, 402 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/encoder-tpd12s015.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 92c2324..6e4af85 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -6,4 +6,10 @@ config DISPLAY_ENCODER_TFP410
help
Driver for TFP410 DPI to DVI encoder.
+config DISPLAY_ENCODER_TPD12S015
+ tristate "TPD12S015 HDMI ESD protection and level shifter"
+ help
+ Driver for TPD12S015, which offers HDMI ESD protection and level
+ shifting.
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index b0d3457..c2ee45e 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
+obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
new file mode 100644
index 0000000..d510c8e
--- /dev/null
+++ b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
@@ -0,0 +1,395 @@
+/*
+ * TPD12S015 HDMI ESD protection & level shifter chip driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ int ct_cp_hpd_gpio;
+ int ls_oe_gpio;
+ int hpd_gpio;
+
+ struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tpd_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ r = gpio_request_one(ddata->ct_cp_hpd_gpio, GPIOF_OUT_INIT_LOW,
+ "hdmi_ct_cp_hpd");
+ if (r)
+ goto err_ct_cp_hpd;
+
+ if (gpio_is_valid(ddata->ls_oe_gpio)) {
+ r = gpio_request_one(ddata->ls_oe_gpio, GPIOF_OUT_INIT_LOW,
+ "hdmi_ls_oe");
+ if (r)
+ goto err_ls_oe;
+ }
+
+ r = gpio_request_one(ddata->hpd_gpio, GPIOF_DIR_IN,
+ "hdmi_hpd");
+ if (r)
+ goto err_hpd;
+
+
+ /* XXX */
+ in->ops.hdmi->set_hpd_gpio(in, ddata->hpd_gpio);
+
+ r = in->ops.hdmi->connect(in, dssdev);
+ if (r)
+ goto err_conn;
+
+ dst->output = dssdev;
+ dssdev->device = dst;
+
+ return 0;
+
+err_conn:
+ gpio_free(ddata->hpd_gpio);
+err_hpd:
+ if (gpio_is_valid(ddata->ls_oe_gpio))
+ gpio_free(ddata->ls_oe_gpio);
+err_ls_oe:
+ gpio_free(ddata->ct_cp_hpd_gpio);
+err_ct_cp_hpd:
+ return r;
+}
+
+static void tpd_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ WARN_ON(dst != dssdev->device);
+
+ if (dst != dssdev->device)
+ return;
+
+ dst->output = NULL;
+ dssdev->device = NULL;
+
+ in->ops.hdmi->disconnect(in, &ddata->dssdev);
+
+ gpio_free(ddata->hpd_gpio);
+ if (gpio_is_valid(ddata->ls_oe_gpio))
+ gpio_free(ddata->ls_oe_gpio);
+ gpio_free(ddata->ct_cp_hpd_gpio);
+}
+
+static int tpd_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE)
+ return 0;
+
+ gpio_set_value(ddata->ct_cp_hpd_gpio, 1);
+ gpio_set_value(ddata->ls_oe_gpio, 1);
+
+ in->ops.hdmi->set_timings(in, &ddata->timings);
+
+ r = in->ops.hdmi->enable(in);
+ if (r)
+ return r;
+
+ if (gpio_is_valid(ddata->ls_oe_gpio))
+ gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return r;
+}
+
+static void tpd_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+ return;
+
+ if (gpio_is_valid(ddata->ls_oe_gpio))
+ gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
+
+ in->ops.hdmi->disable(in);
+
+ gpio_set_value(ddata->ct_cp_hpd_gpio, 0);
+ gpio_set_value(ddata->ls_oe_gpio, 0);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpd_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->timings = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.hdmi->set_timings(in, timings);
+}
+
+static void tpd_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->timings;
+}
+
+static int tpd_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ r = in->ops.hdmi->check_timings(in, timings);
+
+ return r;
+}
+
+static int tpd_read_edid(struct omap_dss_device *dssdev,
+ u8 *edid, int len)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ bool need_enable;
+ int r;
+
+ need_enable = dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ if (need_enable) {
+ gpio_set_value(ddata->ct_cp_hpd_gpio, 1);
+ gpio_set_value(ddata->ls_oe_gpio, 1);
+ }
+
+ r = in->ops.hdmi->read_edid(in, edid, len);
+
+ if (need_enable) {
+ gpio_set_value(ddata->ct_cp_hpd_gpio, 0);
+ gpio_set_value(ddata->ls_oe_gpio, 0);
+ }
+
+ return r;
+}
+
+static bool tpd_detect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ bool need_enable;
+ bool det;
+
+ need_enable = dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ if (need_enable) {
+ gpio_set_value(ddata->ct_cp_hpd_gpio, 1);
+ gpio_set_value(ddata->ls_oe_gpio, 1);
+ }
+
+ det = in->ops.hdmi->detect(in);
+
+ if (need_enable) {
+ gpio_set_value(ddata->ct_cp_hpd_gpio, 0);
+ gpio_set_value(ddata->ls_oe_gpio, 0);
+ }
+
+ return det;
+}
+
+static int tpd_audio_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->audio_enable(in);
+}
+
+static void tpd_audio_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ in->ops.hdmi->audio_disable(in);
+}
+
+static int tpd_audio_start(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->audio_start(in);
+}
+
+static void tpd_audio_stop(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ in->ops.hdmi->audio_stop(in);
+}
+
+static bool tpd_audio_supported(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->audio_supported(in);
+}
+
+static int tpd_audio_config(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->audio_config(in, audio);
+}
+
+static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
+ .connect = tpd_connect,
+ .disconnect = tpd_disconnect,
+
+ .enable = tpd_enable,
+ .disable = tpd_disable,
+
+ .check_timings = tpd_check_timings,
+ .set_timings = tpd_set_timings,
+ .get_timings = tpd_get_timings,
+
+ .read_edid = tpd_read_edid,
+ .detect = tpd_detect,
+
+ .audio_enable = tpd_audio_enable,
+ .audio_disable = tpd_audio_disable,
+ .audio_start = tpd_audio_start,
+ .audio_stop = tpd_audio_stop,
+ .audio_supported = tpd_audio_supported,
+ .audio_config = tpd_audio_config,
+};
+
+static int tpd_probe_pdata(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct encoder_tpd12s015_platform_data *pdata;
+ struct omap_dss_device *dssdev, *in;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ ddata->ct_cp_hpd_gpio = pdata->ct_cp_hpd_gpio;
+ ddata->ls_oe_gpio = pdata->ls_oe_gpio;
+ ddata->hpd_gpio = pdata->hpd_gpio;
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "Failed to find video source\n");
+ return -ENODEV;
+ }
+
+ ddata->in = in;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int tpd_probe(struct platform_device *pdev)
+{
+ struct omap_dss_device *in, *dssdev;
+ struct panel_drv_data *ddata;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = tpd_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ dssdev = &ddata->dssdev;
+ dssdev->ops.hdmi = &tpd_hdmi_ops;
+ dssdev->dev = &pdev->dev;
+ dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+ dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
+ dssdev->owner = THIS_MODULE;
+
+ in = ddata->in;
+
+ r = omapdss_register_output(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register output\n");
+ goto err_reg;
+ }
+
+ return 0;
+err_reg:
+ omap_dss_put_device(in);
+ return r;
+}
+
+static int __exit tpd_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_output(&ddata->dssdev);
+
+ if (ddata->dssdev.output)
+ in->ops.hdmi->disconnect(in, &ddata->dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct platform_driver tpd_driver = {
+ .probe = tpd_probe,
+ .remove = __exit_p(tpd_remove),
+ .driver = {
+ .name = "tpd12s015",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(tpd_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TPD12S015 driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 18/27] OMAPDSS: Add new DVI Connector driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add DVI Connector driver which uses the new DSS device model and DSS
ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 6 +
drivers/video/omap2/displays-new/Makefile | 1 +
drivers/video/omap2/displays-new/connector-dvi.c | 351 +++++++++++++++++++++++
3 files changed, 358 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/connector-dvi.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 6e4af85..76570fc 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -12,4 +12,10 @@ config DISPLAY_ENCODER_TPD12S015
Driver for TPD12S015, which offers HDMI ESD protection and level
shifting.
+config DISPLAY_CONNECTOR_DVI
+ tristate "DVI Connector"
+ depends on I2C
+ help
+ Driver for a generic DVI connector.
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index c2ee45e..ed7dd06 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/omap2/displays-new/connector-dvi.c
new file mode 100644
index 0000000..a427460
--- /dev/null
+++ b/drivers/video/omap2/displays-new/connector-dvi.c
@@ -0,0 +1,351 @@
+/*
+ * Generic DVI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings dvic_default_timings = {
+ .x_res = 640,
+ .y_res = 480,
+
+ .pixel_clock = 23500,
+
+ .hfp = 48,
+ .hsw = 32,
+ .hbp = 80,
+
+ .vfp = 3,
+ .vsw = 4,
+ .vbp = 7,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
+ .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ struct omap_video_timings timings;
+
+ struct i2c_adapter *i2c_adapter;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int dvic_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.dvi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void dvic_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.dvi->disconnect(in, dssdev);
+}
+
+static int dvic_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.dvi->set_timings(in, &ddata->timings);
+
+ r = in->ops.dvi->enable(in);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void dvic_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ in->ops.dvi->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void dvic_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->timings = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.dvi->set_timings(in, timings);
+}
+
+static void dvic_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->timings;
+}
+
+static int dvic_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.dvi->check_timings(in, timings);
+}
+
+static int dvic_ddc_read(struct i2c_adapter *adapter,
+ unsigned char *buf, u16 count, u8 offset)
+{
+ int r, retries;
+
+ for (retries = 3; retries > 0; retries--) {
+ struct i2c_msg msgs[] = {
+ {
+ .addr = DDC_ADDR,
+ .flags = 0,
+ .len = 1,
+ .buf = &offset,
+ }, {
+ .addr = DDC_ADDR,
+ .flags = I2C_M_RD,
+ .len = count,
+ .buf = buf,
+ }
+ };
+
+ r = i2c_transfer(adapter, msgs, 2);
+ if (r = 2)
+ return 0;
+
+ if (r != -EAGAIN)
+ break;
+ }
+
+ return r < 0 ? r : -EIO;
+}
+
+static int dvic_read_edid(struct omap_dss_device *dssdev,
+ u8 *edid, int len)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ int r, l, bytes_read;
+
+ if (!ddata->i2c_adapter)
+ return -ENODEV;
+
+ l = min(EDID_LENGTH, len);
+ r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
+ if (r)
+ return r;
+
+ bytes_read = l;
+
+ /* if there are extensions, read second block */
+ if (len > EDID_LENGTH && edid[0x7e] > 0) {
+ l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+ r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
+ l, EDID_LENGTH);
+ if (r)
+ return r;
+
+ bytes_read += l;
+ }
+
+ return bytes_read;
+}
+
+static bool dvic_detect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ unsigned char out;
+ int r;
+
+ if (!ddata->i2c_adapter)
+ return true;
+
+ r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
+
+ return r = 0;
+}
+
+static struct omap_dss_driver dvic_driver = {
+ .connect = dvic_connect,
+ .disconnect = dvic_disconnect,
+
+ .enable = dvic_enable,
+ .disable = dvic_disable,
+
+ .set_timings = dvic_set_timings,
+ .get_timings = dvic_get_timings,
+ .check_timings = dvic_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+
+ .read_edid = dvic_read_edid,
+ .detect = dvic_detect,
+};
+
+static int dvic_probe_pdata(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct connector_dvi_platform_data *pdata;
+ struct omap_dss_device *in, *dssdev;
+ int i2c_bus_num;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ i2c_bus_num = pdata->i2c_bus_num;
+
+ if (i2c_bus_num != -1) {
+ struct i2c_adapter *adapter;
+
+ adapter = i2c_get_adapter(i2c_bus_num);
+ if (!adapter) {
+ dev_err(&pdev->dev,
+ "Failed to get I2C adapter, bus %d\n",
+ i2c_bus_num);
+ return -EINVAL;
+ }
+
+ ddata->i2c_adapter = adapter;
+ }
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "Failed to find video source\n");
+ return -ENODEV;
+ }
+
+ ddata->in = in;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int dvic_probe(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = dvic_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ ddata->timings = dvic_default_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->driver = &dvic_driver;
+ dssdev->dev = &pdev->dev;
+ dssdev->type = OMAP_DISPLAY_TYPE_DVI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = dvic_default_timings;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int __exit dvic_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_display(&ddata->dssdev);
+
+ dvic_disable(dssdev);
+ dvic_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ if (ddata->i2c_adapter)
+ i2c_put_adapter(ddata->i2c_adapter);
+
+ return 0;
+}
+
+static struct platform_driver dvi_connector_driver = {
+ .probe = dvic_probe,
+ .remove = __exit_p(dvic_remove),
+ .driver = {
+ .name = "connector-dvi",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(dvi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DVI Connector driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 19/27] OMAPDSS: Add new HDMI Connector driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add HDMI Connector driver which uses the new DSS device model and DSS
ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 5 +
drivers/video/omap2/displays-new/Makefile | 1 +
drivers/video/omap2/displays-new/connector-hdmi.c | 375 ++++++++++++++++++++++
3 files changed, 381 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/connector-hdmi.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 76570fc..9a66413 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -18,4 +18,9 @@ config DISPLAY_CONNECTOR_DVI
help
Driver for a generic DVI connector.
+config DISPLAY_CONNECTOR_HDMI
+ tristate "HDMI Connector"
+ help
+ Driver for a generic HDMI connector.
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index ed7dd06..1007b5f 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/omap2/displays-new/connector-hdmi.c
new file mode 100644
index 0000000..c582671
--- /dev/null
+++ b/drivers/video/omap2/displays-new/connector-hdmi.c
@@ -0,0 +1,375 @@
+/*
+ * HDMI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings hdmic_default_timings = {
+ .x_res = 640,
+ .y_res = 480,
+ .pixel_clock = 25175,
+ .hsw = 96,
+ .hfp = 16,
+ .hbp = 48,
+ .vsw = 2,
+ .vfp = 11,
+ .vbp = 31,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+
+ .interlace = false,
+};
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ struct device *dev;
+
+ struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int hdmic_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(ddata->dev, "connect\n");
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.hdmi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void hdmic_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(ddata->dev, "disconnect\n");
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.hdmi->disconnect(in, dssdev);
+}
+
+static int hdmic_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(ddata->dev, "enable\n");
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.hdmi->set_timings(in, &ddata->timings);
+
+ r = in->ops.hdmi->enable(in);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return r;
+}
+
+static void hdmic_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(ddata->dev, "disable\n");
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ in->ops.hdmi->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void hdmic_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->timings = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.hdmi->set_timings(in, timings);
+}
+
+static void hdmic_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->timings;
+}
+
+static int hdmic_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->check_timings(in, timings);
+}
+
+static int hdmic_read_edid(struct omap_dss_device *dssdev,
+ u8 *edid, int len)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->read_edid(in, edid, len);
+}
+
+static bool hdmic_detect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.hdmi->detect(in);
+}
+
+static int hdmic_audio_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ /* enable audio only if the display is active */
+ if (!omapdss_device_is_enabled(dssdev))
+ return -EPERM;
+
+ r = in->ops.hdmi->audio_enable(in);
+ if (r)
+ return r;
+
+ dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
+
+ return 0;
+}
+
+static void hdmic_audio_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ in->ops.hdmi->audio_disable(in);
+
+ dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
+}
+
+static int hdmic_audio_start(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ /*
+ * No need to check the panel state. It was checked when trasitioning
+ * to AUDIO_ENABLED.
+ */
+ if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED)
+ return -EPERM;
+
+ r = in->ops.hdmi->audio_start(in);
+ if (r)
+ return r;
+
+ dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
+
+ return 0;
+}
+
+static void hdmic_audio_stop(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ in->ops.hdmi->audio_stop(in);
+
+ dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
+}
+
+static bool hdmic_audio_supported(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return false;
+
+ return in->ops.hdmi->audio_supported(in);
+}
+
+static int hdmic_audio_config(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ /* config audio only if the display is active */
+ if (!omapdss_device_is_enabled(dssdev))
+ return -EPERM;
+
+ r = in->ops.hdmi->audio_config(in, audio);
+ if (r)
+ return r;
+
+ dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
+
+ return 0;
+}
+
+static struct omap_dss_driver hdmic_driver = {
+ .connect = hdmic_connect,
+ .disconnect = hdmic_disconnect,
+
+ .enable = hdmic_enable,
+ .disable = hdmic_disable,
+
+ .set_timings = hdmic_set_timings,
+ .get_timings = hdmic_get_timings,
+ .check_timings = hdmic_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+
+ .read_edid = hdmic_read_edid,
+ .detect = hdmic_detect,
+
+ .audio_enable = hdmic_audio_enable,
+ .audio_disable = hdmic_audio_disable,
+ .audio_start = hdmic_audio_start,
+ .audio_stop = hdmic_audio_stop,
+ .audio_supported = hdmic_audio_supported,
+ .audio_config = hdmic_audio_config,
+};
+
+static int hdmic_probe_pdata(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct connector_hdmi_platform_data *pdata;
+ struct omap_dss_device *in, *dssdev;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "Failed to find video source\n");
+ return -ENODEV;
+ }
+
+ ddata->in = in;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int hdmic_probe(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+ ddata->dev = &pdev->dev;
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = hdmic_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ ddata->timings = hdmic_default_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->driver = &hdmic_driver;
+ dssdev->dev = &pdev->dev;
+ dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = hdmic_default_timings;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+err_reg:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int __exit hdmic_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_display(&ddata->dssdev);
+
+ hdmic_disable(dssdev);
+ hdmic_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct platform_driver hdmi_connector_driver = {
+ .probe = hdmic_probe,
+ .remove = __exit_p(hdmic_remove),
+ .driver = {
+ .name = "connector-hdmi",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(hdmi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("HDMI Connector driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 20/27] OMAPDSS: Add new Analog TV Connector driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add Analog TV Connector driver which uses the new DSS device model and
DSS ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 5 +
drivers/video/omap2/displays-new/Makefile | 1 +
.../video/omap2/displays-new/connector-analog-tv.c | 265 +++++++++++++++++++++
3 files changed, 271 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/connector-analog-tv.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 9a66413..5326638 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -23,4 +23,9 @@ config DISPLAY_CONNECTOR_HDMI
help
Driver for a generic HDMI connector.
+config DISPLAY_CONNECTOR_ANALOG_TV
+ tristate "Analog TV Connector"
+ help
+ Driver for a generic analog TV connector.
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index 1007b5f..083bf08 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/omap2/displays-new/connector-analog-tv.c
new file mode 100644
index 0000000..5338f36
--- /dev/null
+++ b/drivers/video/omap2/displays-new/connector-analog-tv.c
@@ -0,0 +1,265 @@
+/*
+ * Analog TV Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ struct device *dev;
+
+ struct omap_video_timings timings;
+
+ enum omap_dss_venc_type connector_type;
+ bool invert_polarity;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tvc_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(ddata->dev, "connect\n");
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.atv->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void tvc_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(ddata->dev, "disconnect\n");
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.atv->disconnect(in, dssdev);
+}
+
+static int tvc_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(ddata->dev, "enable\n");
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.atv->set_timings(in, &ddata->timings);
+
+ in->ops.atv->set_type(in, ddata->connector_type);
+ in->ops.atv->invert_vid_out_polarity(in, ddata->invert_polarity);
+
+ r = in->ops.atv->enable(in);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return r;
+}
+
+static void tvc_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(ddata->dev, "disable\n");
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ in->ops.atv->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tvc_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->timings = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.atv->set_timings(in, timings);
+}
+
+static void tvc_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->timings;
+}
+
+static int tvc_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.atv->check_timings(in, timings);
+}
+
+static u32 tvc_get_wss(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.atv->get_wss(in);
+}
+
+static int tvc_set_wss(struct omap_dss_device *dssdev, u32 wss)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.atv->set_wss(in, wss);
+}
+
+static struct omap_dss_driver tvc_driver = {
+ .connect = tvc_connect,
+ .disconnect = tvc_disconnect,
+
+ .enable = tvc_enable,
+ .disable = tvc_disable,
+
+ .set_timings = tvc_set_timings,
+ .get_timings = tvc_get_timings,
+ .check_timings = tvc_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+
+ .get_wss = tvc_get_wss,
+ .set_wss = tvc_set_wss,
+};
+
+static int tvc_probe_pdata(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct connector_atv_platform_data *pdata;
+ struct omap_dss_device *in, *dssdev;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "Failed to find video source\n");
+ return -ENODEV;
+ }
+
+ ddata->in = in;
+
+ ddata->connector_type = pdata->connector_type;
+ ddata->invert_polarity = ddata->invert_polarity;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int tvc_probe(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+ ddata->dev = &pdev->dev;
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = tvc_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ ddata->timings = omap_dss_pal_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->driver = &tvc_driver;
+ dssdev->dev = &pdev->dev;
+ dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = omap_dss_pal_timings;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+err_reg:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int __exit tvc_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_display(&ddata->dssdev);
+
+ tvc_disable(dssdev);
+ tvc_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct platform_driver tvc_connector_driver = {
+ .probe = tvc_probe,
+ .remove = __exit_p(tvc_remove),
+ .driver = {
+ .name = "connector-analog-tv",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(tvc_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Analog TV Connector driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 21/27] OMAPDSS: Add new simple DPI panel driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add simple DPI Panel driver which uses the new DSS device model and DSS
ops. A "simple" panel means one that does not require any special setup.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 5 +
drivers/video/omap2/displays-new/Makefile | 1 +
drivers/video/omap2/displays-new/panel-dpi.c | 270 +++++++++++++++++++++++++++
3 files changed, 276 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/panel-dpi.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 5326638..1435f2f 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -28,4 +28,9 @@ config DISPLAY_CONNECTOR_ANALOG_TV
help
Driver for a generic analog TV connector.
+config PANEL_DPI
+ tristate "Generic DPI panel"
+ help
+ Driver for generic DPI panels.
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index 083bf08..54002d3 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
+obj-$(CONFIG_PANEL_DPI) += panel-dpi.o
diff --git a/drivers/video/omap2/displays-new/panel-dpi.c b/drivers/video/omap2/displays-new/panel-dpi.c
new file mode 100644
index 0000000..5f8f7e7
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-dpi.c
@@ -0,0 +1,270 @@
+/*
+ * Generic MIPI DPI Panel Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ int data_lines;
+
+ struct omap_video_timings videomode;
+
+ int backlight_gpio;
+ int enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int panel_dpi_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.dpi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int panel_dpi_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ in->ops.dpi->set_timings(in, &ddata->videomode);
+
+ r = in->ops.dpi->enable(in);
+ if (r)
+ return r;
+
+ if (gpio_is_valid(ddata->enable_gpio))
+ gpio_set_value_cansleep(ddata->enable_gpio, 1);
+
+ if (gpio_is_valid(ddata->backlight_gpio))
+ gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void panel_dpi_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ if (gpio_is_valid(ddata->enable_gpio))
+ gpio_set_value_cansleep(ddata->enable_gpio, 0);
+
+ if (gpio_is_valid(ddata->backlight_gpio))
+ gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+ in->ops.dpi->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->videomode = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.dpi->set_timings(in, timings);
+}
+
+static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->videomode;
+}
+
+static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver panel_dpi_ops = {
+ .connect = panel_dpi_connect,
+ .disconnect = panel_dpi_disconnect,
+
+ .enable = panel_dpi_enable,
+ .disable = panel_dpi_disable,
+
+ .set_timings = panel_dpi_set_timings,
+ .get_timings = panel_dpi_get_timings,
+ .check_timings = panel_dpi_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+};
+
+static int panel_dpi_probe_pdata(struct platform_device *pdev)
+{
+ const struct panel_dpi_platform_data *pdata;
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev, *in;
+ struct videomode vm;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "failed to find video source '%s'\n",
+ pdata->source);
+ return -EPROBE_DEFER;
+ }
+
+ ddata->in = in;
+
+ ddata->data_lines = pdata->data_lines;
+
+ videomode_from_timing(pdata->display_timing, &vm);
+ videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ ddata->enable_gpio = pdata->enable_gpio;
+ ddata->backlight_gpio = pdata->backlight_gpio;
+
+ return 0;
+}
+
+static int panel_dpi_probe(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (ddata = NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = panel_dpi_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ if (gpio_is_valid(ddata->enable_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio,
+ GPIOF_OUT_INIT_LOW, "panel enable");
+ if (r)
+ goto err_gpio;
+ }
+
+ if (gpio_is_valid(ddata->backlight_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
+ GPIOF_OUT_INIT_LOW, "panel backlight");
+ if (r)
+ goto err_gpio;
+ }
+
+ dssdev = &ddata->dssdev;
+ dssdev->dev = &pdev->dev;
+ dssdev->driver = &panel_dpi_ops;
+ dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = ddata->videomode;
+ dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+err_gpio:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int __exit panel_dpi_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_display(dssdev);
+
+ panel_dpi_disable(dssdev);
+ panel_dpi_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct platform_driver panel_dpi_driver = {
+ .probe = panel_dpi_probe,
+ .remove = __exit_p(panel_dpi_remove),
+ .driver = {
+ .name = "panel-dpi",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(panel_dpi_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 22/27] OMAPDSS: Add new DSI Command Mode panel driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add DSI Command Mode panel driver which uses the new DSS device model
and DSS ops. This driver only supports a very basic set of features
which should be common to all DSI command mode panels.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 5 +
drivers/video/omap2/displays-new/Makefile | 1 +
drivers/video/omap2/displays-new/panel-dsi-cm.c | 1336 +++++++++++++++++++++++
3 files changed, 1342 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/panel-dsi-cm.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 1435f2f..c899d5a 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -33,4 +33,9 @@ config PANEL_DPI
help
Driver for generic DPI panels.
+config PANEL_DSI_CM
+ tristate "Generic DSI Command Mode Panel"
+ help
+ Driver for generic DSI command mode panels.
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index 54002d3..2e72ac3 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
obj-$(CONFIG_PANEL_DPI) += panel-dpi.o
+obj-$(CONFIG_PANEL_DSI_CM) += panel-dsi-cm.o
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/omap2/displays-new/panel-dsi-cm.c
new file mode 100644
index 0000000..48af47d
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-dsi-cm.c
@@ -0,0 +1,1336 @@
+/*
+ * Generic DSI Command Mode panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/* #define DEBUG */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <video/mipi_display.h>
+
+/* DSI Virtual channel. Hardcoded for now. */
+#define TCH 0
+
+#define DCS_READ_NUM_ERRORS 0x05
+#define DCS_BRIGHTNESS 0x51
+#define DCS_CTRL_DISPLAY 0x53
+#define DCS_GET_ID1 0xda
+#define DCS_GET_ID2 0xdb
+#define DCS_GET_ID3 0xdc
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ struct omap_video_timings timings;
+
+ struct platform_device *pdev;
+
+ struct mutex lock;
+
+ struct backlight_device *bldev;
+
+ unsigned long hw_guard_end; /* next value of jiffies when we can
+ * issue the next sleep in/out command
+ */
+ unsigned long hw_guard_wait; /* max guard time in jiffies */
+
+ /* panel HW configuration from DT or platform data */
+ int reset_gpio;
+ int ext_te_gpio;
+
+ bool use_dsi_backlight;
+
+ struct omap_dsi_pin_config pin_config;
+
+ /* runtime variables */
+ bool enabled;
+
+ bool te_enabled;
+
+ atomic_t do_update;
+ int channel;
+
+ struct delayed_work te_timeout_work;
+
+ bool intro_printed;
+
+ struct workqueue_struct *workqueue;
+
+ bool ulps_enabled;
+ unsigned ulps_timeout;
+ struct delayed_work ulps_work;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static irqreturn_t dsicm_te_isr(int irq, void *data);
+static void dsicm_te_timeout_work_callback(struct work_struct *work);
+static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
+
+static int dsicm_panel_reset(struct panel_drv_data *ddata);
+
+static void dsicm_ulps_work(struct work_struct *work);
+
+static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
+{
+ ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
+ ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct panel_drv_data *ddata)
+{
+ unsigned long wait = ddata->hw_guard_end - jiffies;
+
+ if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(wait);
+ }
+}
+
+static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
+{
+ struct omap_dss_device *in = ddata->in;
+ int r;
+ u8 buf[1];
+
+ r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1);
+
+ if (r < 0)
+ return r;
+
+ *data = buf[0];
+
+ return 0;
+}
+
+static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd)
+{
+ struct omap_dss_device *in = ddata->in;
+ return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1);
+}
+
+static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
+{
+ struct omap_dss_device *in = ddata->in;
+ u8 buf[2] = { dcs_cmd, param };
+
+ return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2);
+}
+
+static int dsicm_sleep_in(struct panel_drv_data *ddata)
+
+{
+ struct omap_dss_device *in = ddata->in;
+ u8 cmd;
+ int r;
+
+ hw_guard_wait(ddata);
+
+ cmd = MIPI_DCS_ENTER_SLEEP_MODE;
+ r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1);
+ if (r)
+ return r;
+
+ hw_guard_start(ddata, 120);
+
+ msleep(5);
+
+ return 0;
+}
+
+static int dsicm_sleep_out(struct panel_drv_data *ddata)
+{
+ int r;
+
+ hw_guard_wait(ddata);
+
+ r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE);
+ if (r)
+ return r;
+
+ hw_guard_start(ddata, 120);
+
+ msleep(5);
+
+ return 0;
+}
+
+static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
+{
+ int r;
+
+ r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1);
+ if (r)
+ return r;
+ r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2);
+ if (r)
+ return r;
+ r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int dsicm_set_update_window(struct panel_drv_data *ddata,
+ u16 x, u16 y, u16 w, u16 h)
+{
+ struct omap_dss_device *in = ddata->in;
+ int r;
+ u16 x1 = x;
+ u16 x2 = x + w - 1;
+ u16 y1 = y;
+ u16 y2 = y + h - 1;
+
+ u8 buf[5];
+ buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
+ buf[1] = (x1 >> 8) & 0xff;
+ buf[2] = (x1 >> 0) & 0xff;
+ buf[3] = (x2 >> 8) & 0xff;
+ buf[4] = (x2 >> 0) & 0xff;
+
+ r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
+ if (r)
+ return r;
+
+ buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
+ buf[1] = (y1 >> 8) & 0xff;
+ buf[2] = (y1 >> 0) & 0xff;
+ buf[3] = (y2 >> 8) & 0xff;
+ buf[4] = (y2 >> 0) & 0xff;
+
+ r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
+ if (r)
+ return r;
+
+ in->ops.dsi->bta_sync(in, ddata->channel);
+
+ return r;
+}
+
+static void dsicm_queue_ulps_work(struct panel_drv_data *ddata)
+{
+ if (ddata->ulps_timeout > 0)
+ queue_delayed_work(ddata->workqueue, &ddata->ulps_work,
+ msecs_to_jiffies(ddata->ulps_timeout));
+}
+
+static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata)
+{
+ cancel_delayed_work(&ddata->ulps_work);
+}
+
+static int dsicm_enter_ulps(struct panel_drv_data *ddata)
+{
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (ddata->ulps_enabled)
+ return 0;
+
+ dsicm_cancel_ulps_work(ddata);
+
+ r = _dsicm_enable_te(ddata, false);
+ if (r)
+ goto err;
+
+ if (gpio_is_valid(ddata->ext_te_gpio))
+ disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+
+ in->ops.dsi->disable(in, false, true);
+
+ ddata->ulps_enabled = true;
+
+ return 0;
+
+err:
+ dev_err(&ddata->pdev->dev, "enter ULPS failed");
+ dsicm_panel_reset(ddata);
+
+ ddata->ulps_enabled = false;
+
+ dsicm_queue_ulps_work(ddata);
+
+ return r;
+}
+
+static int dsicm_exit_ulps(struct panel_drv_data *ddata)
+{
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!ddata->ulps_enabled)
+ return 0;
+
+ r = in->ops.dsi->enable(in);
+ if (r) {
+ dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
+ goto err1;
+ }
+
+ in->ops.dsi->enable_hs(in, ddata->channel, true);
+
+ r = _dsicm_enable_te(ddata, true);
+ if (r) {
+ dev_err(&ddata->pdev->dev, "failed to re-enable TE");
+ goto err2;
+ }
+
+ if (gpio_is_valid(ddata->ext_te_gpio))
+ enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+
+ dsicm_queue_ulps_work(ddata);
+
+ ddata->ulps_enabled = false;
+
+ return 0;
+
+err2:
+ dev_err(&ddata->pdev->dev, "failed to exit ULPS");
+
+ r = dsicm_panel_reset(ddata);
+ if (!r) {
+ if (gpio_is_valid(ddata->ext_te_gpio))
+ enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+ ddata->ulps_enabled = false;
+ }
+err1:
+ dsicm_queue_ulps_work(ddata);
+
+ return r;
+}
+
+static int dsicm_wake_up(struct panel_drv_data *ddata)
+{
+ if (ddata->ulps_enabled)
+ return dsicm_exit_ulps(ddata);
+
+ dsicm_cancel_ulps_work(ddata);
+ dsicm_queue_ulps_work(ddata);
+ return 0;
+}
+
+static int dsicm_bl_update_status(struct backlight_device *dev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+ int level;
+
+ if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+ dev->props.power = FB_BLANK_UNBLANK)
+ level = dev->props.brightness;
+ else
+ level = 0;
+
+ dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level);
+
+ mutex_lock(&ddata->lock);
+
+ if (ddata->enabled) {
+ in->ops.dsi->bus_lock(in);
+
+ r = dsicm_wake_up(ddata);
+ if (!r)
+ r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level);
+
+ in->ops.dsi->bus_unlock(in);
+ } else {
+ r = 0;
+ }
+
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+static int dsicm_bl_get_intensity(struct backlight_device *dev)
+{
+ if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+ dev->props.power = FB_BLANK_UNBLANK)
+ return dev->props.brightness;
+
+ return 0;
+}
+
+static const struct backlight_ops dsicm_bl_ops = {
+ .get_brightness = dsicm_bl_get_intensity,
+ .update_status = dsicm_bl_update_status,
+};
+
+static void dsicm_get_resolution(struct omap_dss_device *dssdev,
+ u16 *xres, u16 *yres)
+{
+ *xres = dssdev->panel.timings.x_res;
+ *yres = dssdev->panel.timings.y_res;
+}
+
+static ssize_t dsicm_num_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in = ddata->in;
+ u8 errors = 0;
+ int r;
+
+ mutex_lock(&ddata->lock);
+
+ if (ddata->enabled) {
+ in->ops.dsi->bus_lock(in);
+
+ r = dsicm_wake_up(ddata);
+ if (!r)
+ r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS,
+ &errors);
+
+ in->ops.dsi->bus_unlock(in);
+ } else {
+ r = -ENODEV;
+ }
+
+ mutex_unlock(&ddata->lock);
+
+ if (r)
+ return r;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+}
+
+static ssize_t dsicm_hw_revision_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in = ddata->in;
+ u8 id1, id2, id3;
+ int r;
+
+ mutex_lock(&ddata->lock);
+
+ if (ddata->enabled) {
+ in->ops.dsi->bus_lock(in);
+
+ r = dsicm_wake_up(ddata);
+ if (!r)
+ r = dsicm_get_id(ddata, &id1, &id2, &id3);
+
+ in->ops.dsi->bus_unlock(in);
+ } else {
+ r = -ENODEV;
+ }
+
+ mutex_unlock(&ddata->lock);
+
+ if (r)
+ return r;
+
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+}
+
+static ssize_t dsicm_store_ulps(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in = ddata->in;
+ unsigned long t;
+ int r;
+
+ r = kstrtoul(buf, 0, &t);
+ if (r)
+ return r;
+
+ mutex_lock(&ddata->lock);
+
+ if (ddata->enabled) {
+ in->ops.dsi->bus_lock(in);
+
+ if (t)
+ r = dsicm_enter_ulps(ddata);
+ else
+ r = dsicm_wake_up(ddata);
+
+ in->ops.dsi->bus_unlock(in);
+ }
+
+ mutex_unlock(&ddata->lock);
+
+ if (r)
+ return r;
+
+ return count;
+}
+
+static ssize_t dsicm_show_ulps(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ unsigned t;
+
+ mutex_lock(&ddata->lock);
+ t = ddata->ulps_enabled;
+ mutex_unlock(&ddata->lock);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static ssize_t dsicm_store_ulps_timeout(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in = ddata->in;
+ unsigned long t;
+ int r;
+
+ r = kstrtoul(buf, 0, &t);
+ if (r)
+ return r;
+
+ mutex_lock(&ddata->lock);
+ ddata->ulps_timeout = t;
+
+ if (ddata->enabled) {
+ /* dsicm_wake_up will restart the timer */
+ in->ops.dsi->bus_lock(in);
+ r = dsicm_wake_up(ddata);
+ in->ops.dsi->bus_unlock(in);
+ }
+
+ mutex_unlock(&ddata->lock);
+
+ if (r)
+ return r;
+
+ return count;
+}
+
+static ssize_t dsicm_show_ulps_timeout(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ unsigned t;
+
+ mutex_lock(&ddata->lock);
+ t = ddata->ulps_timeout;
+ mutex_unlock(&ddata->lock);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
+static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL);
+static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
+ dsicm_show_ulps, dsicm_store_ulps);
+static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
+ dsicm_show_ulps_timeout, dsicm_store_ulps_timeout);
+
+static struct attribute *dsicm_attrs[] = {
+ &dev_attr_num_dsi_errors.attr,
+ &dev_attr_hw_revision.attr,
+ &dev_attr_ulps.attr,
+ &dev_attr_ulps_timeout.attr,
+ NULL,
+};
+
+static struct attribute_group dsicm_attr_group = {
+ .attrs = dsicm_attrs,
+};
+
+static void dsicm_hw_reset(struct panel_drv_data *ddata)
+{
+ if (!gpio_is_valid(ddata->reset_gpio))
+ return;
+
+ gpio_set_value(ddata->reset_gpio, 1);
+ udelay(10);
+ /* reset the panel */
+ gpio_set_value(ddata->reset_gpio, 0);
+ /* assert reset */
+ udelay(10);
+ gpio_set_value(ddata->reset_gpio, 1);
+ /* wait after releasing reset */
+ msleep(5);
+}
+
+static int dsicm_power_on(struct panel_drv_data *ddata)
+{
+ struct omap_dss_device *in = ddata->in;
+ u8 id1, id2, id3;
+ int r;
+ struct omap_dss_dsi_config dsi_config = {
+ .mode = OMAP_DSS_DSI_CMD_MODE,
+ .pixel_format = OMAP_DSS_DSI_FMT_RGB888,
+ .timings = &ddata->timings,
+ .hs_clk_min = 150000000,
+ .hs_clk_max = 300000000,
+ .lp_clk_min = 7000000,
+ .lp_clk_max = 10000000,
+ };
+
+ r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
+ if (r) {
+ dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n");
+ goto err0;
+ };
+
+ r = in->ops.dsi->set_config(in, &dsi_config);
+ if (r) {
+ dev_err(&ddata->pdev->dev, "failed to configure DSI\n");
+ goto err0;
+ }
+
+ r = in->ops.dsi->enable(in);
+ if (r) {
+ dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
+ goto err0;
+ }
+
+ dsicm_hw_reset(ddata);
+
+ in->ops.dsi->enable_hs(in, ddata->channel, false);
+
+ r = dsicm_sleep_out(ddata);
+ if (r)
+ goto err;
+
+ r = dsicm_get_id(ddata, &id1, &id2, &id3);
+ if (r)
+ goto err;
+
+ r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
+ if (r)
+ goto err;
+
+ r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY,
+ (1<<2) | (1<<5)); /* BL | BCTRL */
+ if (r)
+ goto err;
+
+ r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT,
+ MIPI_DCS_PIXEL_FMT_24BIT);
+ if (r)
+ goto err;
+
+ r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON);
+ if (r)
+ goto err;
+
+ r = _dsicm_enable_te(ddata, ddata->te_enabled);
+ if (r)
+ goto err;
+
+ r = in->ops.dsi->enable_video_output(in, ddata->channel);
+ if (r)
+ goto err;
+
+ ddata->enabled = 1;
+
+ if (!ddata->intro_printed) {
+ dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n",
+ id1, id2, id3);
+ ddata->intro_printed = true;
+ }
+
+ in->ops.dsi->enable_hs(in, ddata->channel, true);
+
+ return 0;
+err:
+ dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n");
+
+ dsicm_hw_reset(ddata);
+
+ in->ops.dsi->disable(in, true, false);
+err0:
+ return r;
+}
+
+static void dsicm_power_off(struct panel_drv_data *ddata)
+{
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ in->ops.dsi->disable_video_output(in, ddata->channel);
+
+ r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF);
+ if (!r)
+ r = dsicm_sleep_in(ddata);
+
+ if (r) {
+ dev_err(&ddata->pdev->dev,
+ "error disabling panel, issuing HW reset\n");
+ dsicm_hw_reset(ddata);
+ }
+
+ in->ops.dsi->disable(in, true, false);
+
+ ddata->enabled = 0;
+}
+
+static int dsicm_panel_reset(struct panel_drv_data *ddata)
+{
+ dev_err(&ddata->pdev->dev, "performing LCD reset\n");
+
+ dsicm_power_off(ddata);
+ dsicm_hw_reset(ddata);
+ return dsicm_power_on(ddata);
+}
+
+static int dsicm_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ struct device *dev = &ddata->pdev->dev;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.dsi->connect(in, dssdev);
+ if (r) {
+ dev_err(dev, "Failed to connect to video source\n");
+ return r;
+ }
+
+ r = in->ops.dsi->request_vc(ddata->in, &ddata->channel);
+ if (r) {
+ dev_err(dev, "failed to get virtual channel\n");
+ goto err_req_vc;
+ }
+
+ r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH);
+ if (r) {
+ dev_err(dev, "failed to set VC_ID\n");
+ goto err_vc_id;
+ }
+
+ return 0;
+
+err_vc_id:
+ in->ops.dsi->release_vc(ddata->in, ddata->channel);
+err_req_vc:
+ in->ops.dsi->disconnect(in, dssdev);
+ return r;
+}
+
+static void dsicm_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.dsi->release_vc(in, ddata->channel);
+ in->ops.dsi->disconnect(in, dssdev);
+}
+
+static int dsicm_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(&ddata->pdev->dev, "enable\n");
+
+ mutex_lock(&ddata->lock);
+
+ if (!omapdss_device_is_connected(dssdev)) {
+ r = -ENODEV;
+ goto err;
+ }
+
+ if (omapdss_device_is_enabled(dssdev)) {
+ r = 0;
+ goto err;
+ }
+
+ in->ops.dsi->bus_lock(in);
+
+ r = dsicm_power_on(ddata);
+
+ in->ops.dsi->bus_unlock(in);
+
+ if (r)
+ goto err;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+err:
+ dev_dbg(&ddata->pdev->dev, "enable failed\n");
+ mutex_unlock(&ddata->lock);
+ return r;
+}
+
+static void dsicm_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(&ddata->pdev->dev, "disable\n");
+
+ mutex_lock(&ddata->lock);
+
+ dsicm_cancel_ulps_work(ddata);
+
+ in->ops.dsi->bus_lock(in);
+
+ if (omapdss_device_is_enabled(dssdev)) {
+ r = dsicm_wake_up(ddata);
+ if (!r)
+ dsicm_power_off(ddata);
+ }
+
+ in->ops.dsi->bus_unlock(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+ mutex_unlock(&ddata->lock);
+}
+
+static void dsicm_framedone_cb(int err, void *data)
+{
+ struct panel_drv_data *ddata = data;
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err);
+ in->ops.dsi->bus_unlock(ddata->in);
+}
+
+static irqreturn_t dsicm_te_isr(int irq, void *data)
+{
+ struct panel_drv_data *ddata = data;
+ struct omap_dss_device *in = ddata->in;
+ int old;
+ int r;
+
+ old = atomic_cmpxchg(&ddata->do_update, 1, 0);
+
+ if (old) {
+ cancel_delayed_work(&ddata->te_timeout_work);
+
+ r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
+ ddata);
+ if (r)
+ goto err;
+ }
+
+ return IRQ_HANDLED;
+err:
+ dev_err(&ddata->pdev->dev, "start update failed\n");
+ in->ops.dsi->bus_unlock(in);
+ return IRQ_HANDLED;
+}
+
+static void dsicm_te_timeout_work_callback(struct work_struct *work)
+{
+ struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
+ te_timeout_work.work);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n");
+
+ atomic_set(&ddata->do_update, 0);
+ in->ops.dsi->bus_unlock(in);
+}
+
+static int dsicm_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
+
+ mutex_lock(&ddata->lock);
+ in->ops.dsi->bus_lock(in);
+
+ r = dsicm_wake_up(ddata);
+ if (r)
+ goto err;
+
+ if (!ddata->enabled) {
+ r = 0;
+ goto err;
+ }
+
+ /* XXX no need to send this every frame, but dsi break if not done */
+ r = dsicm_set_update_window(ddata, 0, 0,
+ dssdev->panel.timings.x_res,
+ dssdev->panel.timings.y_res);
+ if (r)
+ goto err;
+
+ if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+ schedule_delayed_work(&ddata->te_timeout_work,
+ msecs_to_jiffies(250));
+ atomic_set(&ddata->do_update, 1);
+ } else {
+ r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
+ ddata);
+ if (r)
+ goto err;
+ }
+
+ /* note: no bus_unlock here. unlock is in framedone_cb */
+ mutex_unlock(&ddata->lock);
+ return 0;
+err:
+ in->ops.dsi->bus_unlock(in);
+ mutex_unlock(&ddata->lock);
+ return r;
+}
+
+static int dsicm_sync(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(&ddata->pdev->dev, "sync\n");
+
+ mutex_lock(&ddata->lock);
+ in->ops.dsi->bus_lock(in);
+ in->ops.dsi->bus_unlock(in);
+ mutex_unlock(&ddata->lock);
+
+ dev_dbg(&ddata->pdev->dev, "sync done\n");
+
+ return 0;
+}
+
+static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
+{
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (enable)
+ r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0);
+ else
+ r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
+
+ if (!gpio_is_valid(ddata->ext_te_gpio))
+ in->ops.dsi->enable_te(in, enable);
+
+ /* possible panel bug */
+ msleep(100);
+
+ return r;
+}
+
+static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ mutex_lock(&ddata->lock);
+
+ if (ddata->te_enabled = enable)
+ goto end;
+
+ in->ops.dsi->bus_lock(in);
+
+ if (ddata->enabled) {
+ r = dsicm_wake_up(ddata);
+ if (r)
+ goto err;
+
+ r = _dsicm_enable_te(ddata, enable);
+ if (r)
+ goto err;
+ }
+
+ ddata->te_enabled = enable;
+
+ in->ops.dsi->bus_unlock(in);
+end:
+ mutex_unlock(&ddata->lock);
+
+ return 0;
+err:
+ in->ops.dsi->bus_unlock(in);
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+static int dsicm_get_te(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ int r;
+
+ mutex_lock(&ddata->lock);
+ r = ddata->te_enabled;
+ mutex_unlock(&ddata->lock);
+
+ return r;
+}
+
+static int dsicm_memory_read(struct omap_dss_device *dssdev,
+ void *buf, size_t size,
+ u16 x, u16 y, u16 w, u16 h)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+ int first = 1;
+ int plen;
+ unsigned buf_used = 0;
+
+ if (size < w * h * 3)
+ return -ENOMEM;
+
+ mutex_lock(&ddata->lock);
+
+ if (!ddata->enabled) {
+ r = -ENODEV;
+ goto err1;
+ }
+
+ size = min(w * h * 3,
+ dssdev->panel.timings.x_res *
+ dssdev->panel.timings.y_res * 3);
+
+ in->ops.dsi->bus_lock(in);
+
+ r = dsicm_wake_up(ddata);
+ if (r)
+ goto err2;
+
+ /* plen 1 or 2 goes into short packet. until checksum error is fixed,
+ * use short packets. plen 32 works, but bigger packets seem to cause
+ * an error. */
+ if (size % 2)
+ plen = 1;
+ else
+ plen = 2;
+
+ dsicm_set_update_window(ddata, x, y, w, h);
+
+ r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen);
+ if (r)
+ goto err2;
+
+ while (buf_used < size) {
+ u8 dcs_cmd = first ? 0x2e : 0x3e;
+ first = 0;
+
+ r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd,
+ buf + buf_used, size - buf_used);
+
+ if (r < 0) {
+ dev_err(dssdev->dev, "read error\n");
+ goto err3;
+ }
+
+ buf_used += r;
+
+ if (r < plen) {
+ dev_err(&ddata->pdev->dev, "short read\n");
+ break;
+ }
+
+ if (signal_pending(current)) {
+ dev_err(&ddata->pdev->dev, "signal pending, "
+ "aborting memory read\n");
+ r = -ERESTARTSYS;
+ goto err3;
+ }
+ }
+
+ r = buf_used;
+
+err3:
+ in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1);
+err2:
+ in->ops.dsi->bus_unlock(in);
+err1:
+ mutex_unlock(&ddata->lock);
+ return r;
+}
+
+static void dsicm_ulps_work(struct work_struct *work)
+{
+ struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
+ ulps_work.work);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ mutex_lock(&ddata->lock);
+
+ if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) {
+ mutex_unlock(&ddata->lock);
+ return;
+ }
+
+ in->ops.dsi->bus_lock(in);
+
+ dsicm_enter_ulps(ddata);
+
+ in->ops.dsi->bus_unlock(in);
+ mutex_unlock(&ddata->lock);
+}
+
+static struct omap_dss_driver dsicm_ops = {
+ .connect = dsicm_connect,
+ .disconnect = dsicm_disconnect,
+
+ .enable = dsicm_enable,
+ .disable = dsicm_disable,
+
+ .update = dsicm_update,
+ .sync = dsicm_sync,
+
+ .get_resolution = dsicm_get_resolution,
+ .get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+ .enable_te = dsicm_enable_te,
+ .get_te = dsicm_get_te,
+
+ .memory_read = dsicm_memory_read,
+};
+
+static int dsicm_probe_pdata(struct platform_device *pdev)
+{
+ const struct panel_dsicm_platform_data *pdata;
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev, *in;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return -EPROBE_DEFER;
+ }
+ ddata->in = in;
+
+ ddata->reset_gpio = pdata->reset_gpio;
+
+ if (pdata->use_ext_te)
+ ddata->ext_te_gpio = pdata->ext_te_gpio;
+ else
+ ddata->ext_te_gpio = -1;
+
+ ddata->ulps_timeout = pdata->ulps_timeout;
+
+ ddata->use_dsi_backlight = pdata->use_dsi_backlight;
+
+ ddata->pin_config = pdata->pin_config;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int dsicm_probe(struct platform_device *pdev)
+{
+ struct backlight_properties props;
+ struct panel_drv_data *ddata;
+ struct backlight_device *bldev = NULL;
+ struct device *dev = &pdev->dev;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ dev_dbg(dev, "probe\n");
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+ ddata->pdev = pdev;
+
+ if (dev_get_platdata(dev)) {
+ r = dsicm_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ ddata->timings.x_res = 864;
+ ddata->timings.y_res = 480;
+ ddata->timings.pixel_clock = DIV_ROUND_UP(864 * 480 * 60, 1000);
+
+ dssdev = &ddata->dssdev;
+ dssdev->dev = dev;
+ dssdev->driver = &dsicm_ops;
+ dssdev->panel.timings = ddata->timings;
+ dssdev->type = OMAP_DISPLAY_TYPE_DSI;
+ dssdev->owner = THIS_MODULE;
+
+ dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
+ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
+ OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ mutex_init(&ddata->lock);
+
+ atomic_set(&ddata->do_update, 0);
+
+ if (gpio_is_valid(ddata->reset_gpio)) {
+ r = devm_gpio_request_one(dev, ddata->reset_gpio,
+ GPIOF_OUT_INIT_LOW, "taal rst");
+ if (r) {
+ dev_err(dev, "failed to request reset gpio\n");
+ return r;
+ }
+ }
+
+ if (gpio_is_valid(ddata->ext_te_gpio)) {
+ r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
+ GPIOF_IN, "taal irq");
+ if (r) {
+ dev_err(dev, "GPIO request failed\n");
+ return r;
+ }
+
+ r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+ dsicm_te_isr,
+ IRQF_TRIGGER_RISING,
+ "taal vsync", ddata);
+
+ if (r) {
+ dev_err(dev, "IRQ request failed\n");
+ return r;
+ }
+
+ INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
+ dsicm_te_timeout_work_callback);
+
+ dev_dbg(dev, "Using GPIO TE\n");
+ }
+
+ ddata->workqueue = create_singlethread_workqueue("dsicm_wq");
+ if (ddata->workqueue = NULL) {
+ dev_err(dev, "can't create workqueue\n");
+ return -ENOMEM;
+ }
+ INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work);
+
+ dsicm_hw_reset(ddata);
+
+ if (ddata->use_dsi_backlight) {
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 255;
+
+ props.type = BACKLIGHT_RAW;
+ bldev = backlight_device_register(dev_name(dev),
+ dev, ddata, &dsicm_bl_ops, &props);
+ if (IS_ERR(bldev)) {
+ r = PTR_ERR(bldev);
+ goto err_bl;
+ }
+
+ ddata->bldev = bldev;
+
+ bldev->props.fb_blank = FB_BLANK_UNBLANK;
+ bldev->props.power = FB_BLANK_UNBLANK;
+ bldev->props.brightness = 255;
+
+ dsicm_bl_update_status(bldev);
+ }
+
+ r = sysfs_create_group(&dev->kobj, &dsicm_attr_group);
+ if (r) {
+ dev_err(dev, "failed to create sysfs files\n");
+ goto err_sysfs_create;
+ }
+
+ return 0;
+
+err_sysfs_create:
+ if (bldev != NULL)
+ backlight_device_unregister(bldev);
+err_bl:
+ destroy_workqueue(ddata->workqueue);
+err_reg:
+ return r;
+}
+
+static int __exit dsicm_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct backlight_device *bldev;
+
+ dev_dbg(&pdev->dev, "remove\n");
+
+ omapdss_unregister_display(dssdev);
+
+ dsicm_disable(dssdev);
+ dsicm_disconnect(dssdev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
+
+ bldev = ddata->bldev;
+ if (bldev != NULL) {
+ bldev->props.power = FB_BLANK_POWERDOWN;
+ dsicm_bl_update_status(bldev);
+ backlight_device_unregister(bldev);
+ }
+
+ omap_dss_put_device(ddata->in);
+
+ dsicm_cancel_ulps_work(ddata);
+ destroy_workqueue(ddata->workqueue);
+
+ /* reset, to be sure that the panel is in a valid state */
+ dsicm_hw_reset(ddata);
+
+ return 0;
+}
+
+static struct platform_driver dsicm_driver = {
+ .probe = dsicm_probe,
+ .remove = __exit_p(dsicm_remove),
+ .driver = {
+ .name = "panel-dsi-cm",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(dsicm_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 23/27] OMAPDSS: Add Sony ACX565AKM panel driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add Sony ACX565AKM panel driver which uses the new DSS device model and
DSS ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 6 +
drivers/video/omap2/displays-new/Makefile | 1 +
.../omap2/displays-new/panel-sony-acx565akm.c | 864 +++++++++++++++++++++
3 files changed, 871 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/panel-sony-acx565akm.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index c899d5a..b7b13ac 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -38,4 +38,10 @@ config PANEL_DSI_CM
help
Driver for generic DSI command mode panels.
+config PANEL_SONY_ACX565AKM
+ tristate "ACX565AKM Panel"
+ depends on SPI && BACKLIGHT_CLASS_DEVICE
+ help
+ This is the LCD panel used on Nokia N900
+
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index 2e72ac3..eff4b8a 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
obj-$(CONFIG_PANEL_DPI) += panel-dpi.o
obj-$(CONFIG_PANEL_DSI_CM) += panel-dsi-cm.o
+obj-$(CONFIG_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
new file mode 100644
index 0000000..ca9c81e
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
@@ -0,0 +1,864 @@
+/*
+ * Sony ACX565AKM LCD Panel driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Original Driver Author: Imre Deak <imre.deak@nokia.com>
+ * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+#define MIPID_CMD_READ_DISP_ID 0x04
+#define MIPID_CMD_READ_RED 0x06
+#define MIPID_CMD_READ_GREEN 0x07
+#define MIPID_CMD_READ_BLUE 0x08
+#define MIPID_CMD_READ_DISP_STATUS 0x09
+#define MIPID_CMD_RDDSDR 0x0F
+#define MIPID_CMD_SLEEP_IN 0x10
+#define MIPID_CMD_SLEEP_OUT 0x11
+#define MIPID_CMD_DISP_OFF 0x28
+#define MIPID_CMD_DISP_ON 0x29
+#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51
+#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52
+#define MIPID_CMD_WRITE_CTRL_DISP 0x53
+
+#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
+#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
+#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
+#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
+
+#define MIPID_CMD_READ_CTRL_DISP 0x54
+#define MIPID_CMD_WRITE_CABC 0x55
+#define MIPID_CMD_READ_CABC 0x56
+
+#define MIPID_VER_LPH8923 3
+#define MIPID_VER_LS041Y3 4
+#define MIPID_VER_L4F00311 8
+#define MIPID_VER_ACX565AKM 9
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ int reset_gpio;
+ int datapairs;
+
+ struct omap_video_timings videomode;
+
+ char *name;
+ int enabled;
+ int model;
+ int revision;
+ u8 display_id[3];
+ unsigned has_bc:1;
+ unsigned has_cabc:1;
+ unsigned cabc_mode;
+ unsigned long hw_guard_end; /* next value of jiffies
+ when we can issue the
+ next sleep in/out command */
+ unsigned long hw_guard_wait; /* max guard time in jiffies */
+
+ struct spi_device *spi;
+ struct mutex mutex;
+
+ struct backlight_device *bl_dev;
+};
+
+static const struct omap_video_timings acx_panel_timings = {
+ .x_res = 800,
+ .y_res = 480,
+ .pixel_clock = 24000,
+ .hfp = 28,
+ .hsw = 4,
+ .hbp = 24,
+ .vfp = 3,
+ .vsw = 3,
+ .vbp = 4,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+
+ .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
+ .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static void acx565akm_transfer(struct panel_drv_data *ddata, int cmd,
+ const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct spi_message m;
+ struct spi_transfer *x, xfer[5];
+ int r;
+
+ BUG_ON(ddata->spi = NULL);
+
+ spi_message_init(&m);
+
+ memset(xfer, 0, sizeof(xfer));
+ x = &xfer[0];
+
+ cmd &= 0xff;
+ x->tx_buf = &cmd;
+ x->bits_per_word = 9;
+ x->len = 2;
+
+ if (rlen > 1 && wlen = 0) {
+ /*
+ * Between the command and the response data there is a
+ * dummy clock cycle. Add an extra bit after the command
+ * word to account for this.
+ */
+ x->bits_per_word = 10;
+ cmd <<= 1;
+ }
+ spi_message_add_tail(x, &m);
+
+ if (wlen) {
+ x++;
+ x->tx_buf = wbuf;
+ x->len = wlen;
+ x->bits_per_word = 9;
+ spi_message_add_tail(x, &m);
+ }
+
+ if (rlen) {
+ x++;
+ x->rx_buf = rbuf;
+ x->len = rlen;
+ spi_message_add_tail(x, &m);
+ }
+
+ r = spi_sync(ddata->spi, &m);
+ if (r < 0)
+ dev_dbg(&ddata->spi->dev, "spi_sync %d\n", r);
+}
+
+static inline void acx565akm_cmd(struct panel_drv_data *ddata, int cmd)
+{
+ acx565akm_transfer(ddata, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void acx565akm_write(struct panel_drv_data *ddata,
+ int reg, const u8 *buf, int len)
+{
+ acx565akm_transfer(ddata, reg, buf, len, NULL, 0);
+}
+
+static inline void acx565akm_read(struct panel_drv_data *ddata,
+ int reg, u8 *buf, int len)
+{
+ acx565akm_transfer(ddata, reg, NULL, 0, buf, len);
+}
+
+static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
+{
+ ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
+ ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct panel_drv_data *ddata)
+{
+ unsigned long wait = ddata->hw_guard_end - jiffies;
+
+ if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(wait);
+ }
+}
+
+static void set_sleep_mode(struct panel_drv_data *ddata, int on)
+{
+ int cmd;
+
+ if (on)
+ cmd = MIPID_CMD_SLEEP_IN;
+ else
+ cmd = MIPID_CMD_SLEEP_OUT;
+ /*
+ * We have to keep 120msec between sleep in/out commands.
+ * (8.2.15, 8.2.16).
+ */
+ hw_guard_wait(ddata);
+ acx565akm_cmd(ddata, cmd);
+ hw_guard_start(ddata, 120);
+}
+
+static void set_display_state(struct panel_drv_data *ddata, int enabled)
+{
+ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+ acx565akm_cmd(ddata, cmd);
+}
+
+static int panel_enabled(struct panel_drv_data *ddata)
+{
+ u32 disp_status;
+ int enabled;
+
+ acx565akm_read(ddata, MIPID_CMD_READ_DISP_STATUS,
+ (u8 *)&disp_status, 4);
+ disp_status = __be32_to_cpu(disp_status);
+ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+ dev_dbg(&ddata->spi->dev,
+ "LCD panel %senabled by bootloader (status 0x%04x)\n",
+ enabled ? "" : "not ", disp_status);
+ return enabled;
+}
+
+static int panel_detect(struct panel_drv_data *ddata)
+{
+ acx565akm_read(ddata, MIPID_CMD_READ_DISP_ID, ddata->display_id, 3);
+ dev_dbg(&ddata->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+ ddata->display_id[0],
+ ddata->display_id[1],
+ ddata->display_id[2]);
+
+ switch (ddata->display_id[0]) {
+ case 0x10:
+ ddata->model = MIPID_VER_ACX565AKM;
+ ddata->name = "acx565akm";
+ ddata->has_bc = 1;
+ ddata->has_cabc = 1;
+ break;
+ case 0x29:
+ ddata->model = MIPID_VER_L4F00311;
+ ddata->name = "l4f00311";
+ break;
+ case 0x45:
+ ddata->model = MIPID_VER_LPH8923;
+ ddata->name = "lph8923";
+ break;
+ case 0x83:
+ ddata->model = MIPID_VER_LS041Y3;
+ ddata->name = "ls041y3";
+ break;
+ default:
+ ddata->name = "unknown";
+ dev_err(&ddata->spi->dev, "invalid display ID\n");
+ return -ENODEV;
+ }
+
+ ddata->revision = ddata->display_id[1];
+
+ dev_info(&ddata->spi->dev, "omapfb: %s rev %02x LCD detected\n",
+ ddata->name, ddata->revision);
+
+ return 0;
+}
+
+/*----------------------Backlight Control-------------------------*/
+
+static void enable_backlight_ctrl(struct panel_drv_data *ddata, int enable)
+{
+ u16 ctrl;
+
+ acx565akm_read(ddata, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
+ if (enable) {
+ ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
+ CTRL_DISP_BACKLIGHT_ON;
+ } else {
+ ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
+ CTRL_DISP_BACKLIGHT_ON);
+ }
+
+ ctrl |= 1 << 8;
+ acx565akm_write(ddata, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
+}
+
+static void set_cabc_mode(struct panel_drv_data *ddata, unsigned mode)
+{
+ u16 cabc_ctrl;
+
+ ddata->cabc_mode = mode;
+ if (!ddata->enabled)
+ return;
+ cabc_ctrl = 0;
+ acx565akm_read(ddata, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
+ cabc_ctrl &= ~3;
+ cabc_ctrl |= (1 << 8) | (mode & 3);
+ acx565akm_write(ddata, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
+}
+
+static unsigned get_cabc_mode(struct panel_drv_data *ddata)
+{
+ return ddata->cabc_mode;
+}
+
+static unsigned get_hw_cabc_mode(struct panel_drv_data *ddata)
+{
+ u8 cabc_ctrl;
+
+ acx565akm_read(ddata, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
+ return cabc_ctrl & 3;
+}
+
+static void acx565akm_set_brightness(struct panel_drv_data *ddata, int level)
+{
+ int bv;
+
+ bv = level | (1 << 8);
+ acx565akm_write(ddata, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
+
+ if (level)
+ enable_backlight_ctrl(ddata, 1);
+ else
+ enable_backlight_ctrl(ddata, 0);
+}
+
+static int acx565akm_get_actual_brightness(struct panel_drv_data *ddata)
+{
+ u8 bv;
+
+ acx565akm_read(ddata, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
+
+ return bv;
+}
+
+
+static int acx565akm_bl_update_status(struct backlight_device *dev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+ int r;
+ int level;
+
+ dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+ mutex_lock(&ddata->mutex);
+
+ if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+ dev->props.power = FB_BLANK_UNBLANK)
+ level = dev->props.brightness;
+ else
+ level = 0;
+
+ r = 0;
+ if (ddata->has_bc)
+ acx565akm_set_brightness(ddata, level);
+ else
+ r = -ENODEV;
+
+ mutex_unlock(&ddata->mutex);
+
+ return r;
+}
+
+static int acx565akm_bl_get_intensity(struct backlight_device *dev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+
+ dev_dbg(&dev->dev, "%s\n", __func__);
+
+ if (!ddata->has_bc)
+ return -ENODEV;
+
+ if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+ dev->props.power = FB_BLANK_UNBLANK) {
+ if (ddata->has_bc)
+ return acx565akm_get_actual_brightness(ddata);
+ else
+ return dev->props.brightness;
+ }
+
+ return 0;
+}
+
+static const struct backlight_ops acx565akm_bl_ops = {
+ .get_brightness = acx565akm_bl_get_intensity,
+ .update_status = acx565akm_bl_update_status,
+};
+
+/*--------------------Auto Brightness control via Sysfs---------------------*/
+
+static const char * const cabc_modes[] = {
+ "off", /* always used when CABC is not supported */
+ "ui",
+ "still-image",
+ "moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ const char *mode_str;
+ int mode;
+ int len;
+
+ if (!ddata->has_cabc)
+ mode = 0;
+ else
+ mode = get_cabc_mode(ddata);
+ mode_str = "unknown";
+ if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+ mode_str = cabc_modes[mode];
+ len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+ return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+ const char *mode_str = cabc_modes[i];
+ int cmp_len = strlen(mode_str);
+
+ if (count > 0 && buf[count - 1] = '\n')
+ count--;
+ if (count != cmp_len)
+ continue;
+
+ if (strncmp(buf, mode_str, cmp_len) = 0)
+ break;
+ }
+
+ if (i = ARRAY_SIZE(cabc_modes))
+ return -EINVAL;
+
+ if (!ddata->has_cabc && i != 0)
+ return -EINVAL;
+
+ mutex_lock(&ddata->mutex);
+ set_cabc_mode(ddata, i);
+ mutex_unlock(&ddata->mutex);
+
+ return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ int len;
+ int i;
+
+ if (!ddata->has_cabc)
+ return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+
+ for (i = 0, len = 0;
+ len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+ len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+ i ? " " : "", cabc_modes[i],
+ i = ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+ return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+ show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+ show_cabc_available_modes, NULL);
+
+static struct attribute *bldev_attrs[] = {
+ &dev_attr_cabc_mode.attr,
+ &dev_attr_cabc_available_modes.attr,
+ NULL,
+};
+
+static struct attribute_group bldev_attr_group = {
+ .attrs = bldev_attrs,
+};
+
+static int acx_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.sdi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void acx_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.sdi->disconnect(in, dssdev);
+}
+
+static int acx_panel_power_on(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+ in->ops.sdi->set_timings(in, &ddata->videomode);
+ in->ops.sdi->set_datapairs(in, ddata->datapairs);
+
+ r = in->ops.sdi->enable(in);
+ if (r) {
+ pr_err("%s sdi enable failed\n", __func__);
+ return r;
+ }
+
+ /*FIXME tweak me */
+ msleep(50);
+
+ if (gpio_is_valid(ddata->reset_gpio))
+ gpio_set_value(ddata->reset_gpio, 1);
+
+ if (ddata->enabled) {
+ dev_dbg(&ddata->spi->dev, "panel already enabled\n");
+ return 0;
+ }
+
+ /*
+ * We have to meet all the following delay requirements:
+ * 1. tRW: reset pulse width 10usec (7.12.1)
+ * 2. tRT: reset cancel time 5msec (7.12.1)
+ * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
+ * case (7.6.2)
+ * 4. 120msec before the sleep out command (7.12.1)
+ */
+ msleep(120);
+
+ set_sleep_mode(ddata, 0);
+ ddata->enabled = 1;
+
+ /* 5msec between sleep out and the next command. (8.2.16) */
+ msleep(5);
+ set_display_state(ddata, 1);
+ set_cabc_mode(ddata, ddata->cabc_mode);
+
+ mutex_unlock(&ddata->mutex);
+
+ return acx565akm_bl_update_status(ddata->bl_dev);
+}
+
+static void acx_panel_power_off(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(dssdev->dev, "%s\n", __func__);
+
+ if (!ddata->enabled)
+ return;
+
+ set_display_state(ddata, 0);
+ set_sleep_mode(ddata, 1);
+ ddata->enabled = 0;
+ /*
+ * We have to provide PCLK,HS,VS signals for 2 frames (worst case
+ * ~50msec) after sending the sleep in command and asserting the
+ * reset signal. We probably could assert the reset w/o the delay
+ * but we still delay to avoid possible artifacts. (7.6.1)
+ */
+ msleep(50);
+
+ if (gpio_is_valid(ddata->reset_gpio))
+ gpio_set_value(ddata->reset_gpio, 0);
+
+ /* FIXME need to tweak this delay */
+ msleep(100);
+
+ in->ops.sdi->disable(in);
+}
+
+static int acx_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ int r;
+
+ dev_dbg(dssdev->dev, "%s\n", __func__);
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ mutex_lock(&ddata->mutex);
+ r = acx_panel_power_on(dssdev);
+ mutex_unlock(&ddata->mutex);
+
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void acx_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ dev_dbg(dssdev->dev, "%s\n", __func__);
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ mutex_lock(&ddata->mutex);
+ acx_panel_power_off(dssdev);
+ mutex_unlock(&ddata->mutex);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void acx_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->videomode = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.sdi->set_timings(in, timings);
+}
+
+static void acx_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->videomode;
+}
+
+static int acx_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.sdi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver acx_ops = {
+ .connect = acx_connect,
+ .disconnect = acx_disconnect,
+
+ .enable = acx_enable,
+ .disable = acx_disable,
+
+ .set_timings = acx_set_timings,
+ .get_timings = acx_get_timings,
+ .check_timings = acx_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+};
+
+static int acx_probe_pdata(struct spi_device *spi)
+{
+ const struct panel_acx565akm_platform_data *pdata;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *dssdev, *in;
+ int r;
+
+ pdata = dev_get_platdata(&spi->dev);
+
+ if (gpio_is_valid(pdata->reset_gpio)) {
+ r = devm_gpio_request_one(&spi->dev, pdata->reset_gpio,
+ GPIOF_OUT_INIT_LOW, "lcd reset");
+ if (r)
+ return r;
+ }
+ ddata->reset_gpio = pdata->reset_gpio;
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&spi->dev, "failed to find video source '%s'\n",
+ pdata->source);
+ return -EPROBE_DEFER;
+ }
+ ddata->in = in;
+
+ ddata->datapairs = pdata->datapairs;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int acx565akm_spi_probe(struct spi_device *spi)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ struct backlight_device *bldev;
+ int max_brightness, brightness;
+ struct backlight_properties props;
+ int r;
+
+ dev_dbg(&spi->dev, "%s\n", __func__);
+
+ spi->mode = SPI_MODE_3;
+
+ ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+ if (ddata = NULL)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, ddata);
+
+ ddata->spi = spi;
+
+ mutex_init(&ddata->mutex);
+
+ if (dev_get_platdata(&spi->dev)) {
+ r = acx_probe_pdata(spi);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ if (gpio_is_valid(ddata->reset_gpio))
+ gpio_set_value(ddata->reset_gpio, 1);
+
+ /*
+ * After reset we have to wait 5 msec before the first
+ * command can be sent.
+ */
+ msleep(5);
+
+ ddata->enabled = panel_enabled(ddata);
+
+ r = panel_detect(ddata);
+
+ if (!ddata->enabled && gpio_is_valid(ddata->reset_gpio))
+ gpio_set_value(ddata->reset_gpio, 0);
+
+ if (r) {
+ dev_err(&spi->dev, "%s panel detect error\n", __func__);
+ goto err_detect;
+ }
+
+ memset(&props, 0, sizeof(props));
+ props.fb_blank = FB_BLANK_UNBLANK;
+ props.power = FB_BLANK_UNBLANK;
+ props.type = BACKLIGHT_RAW;
+
+ bldev = backlight_device_register("acx565akm", &ddata->spi->dev,
+ ddata, &acx565akm_bl_ops, &props);
+ ddata->bl_dev = bldev;
+ if (ddata->has_cabc) {
+ r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
+ if (r) {
+ dev_err(&bldev->dev,
+ "%s failed to create sysfs files\n", __func__);
+ goto err_sysfs;
+ }
+ ddata->cabc_mode = get_hw_cabc_mode(ddata);
+ }
+
+ max_brightness = 255;
+
+ if (ddata->has_bc)
+ brightness = acx565akm_get_actual_brightness(ddata);
+ else
+ brightness = 0;
+
+ bldev->props.max_brightness = max_brightness;
+ bldev->props.brightness = brightness;
+
+ acx565akm_bl_update_status(bldev);
+
+
+ ddata->videomode = acx_panel_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->dev = &spi->dev;
+ dssdev->driver = &acx_ops;
+ dssdev->type = OMAP_DISPLAY_TYPE_SDI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = ddata->videomode;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&spi->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+ sysfs_remove_group(&bldev->dev.kobj, &bldev_attr_group);
+err_sysfs:
+ backlight_device_unregister(bldev);
+err_detect:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int acx565akm_spi_remove(struct spi_device *spi)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+ sysfs_remove_group(&ddata->bl_dev->dev.kobj, &bldev_attr_group);
+ backlight_device_unregister(ddata->bl_dev);
+
+ omapdss_unregister_display(dssdev);
+
+ acx_disable(dssdev);
+ acx_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct spi_driver acx565akm_spi_driver = {
+ .driver = {
+ .name = "acx565akm",
+ .owner = THIS_MODULE,
+ },
+ .probe = acx565akm_spi_probe,
+ .remove = acx565akm_spi_remove,
+};
+
+module_spi_driver(acx565akm_spi_driver);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("acx565akm LCD Driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 24/27] OMAPDSS: Add LG.Philips LB035Q02 panel driver
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
Add LG.Philips LB035Q02 panel driver which uses the new DSS device model
and DSS ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/Kconfig | 5 +
drivers/video/omap2/displays-new/Makefile | 1 +
.../omap2/displays-new/panel-lgphilips-lb035q02.c | 358 +++++++++++++++++++++
3 files changed, 364 insertions(+)
create mode 100644 drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index b7b13ac..56e2496 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -44,4 +44,9 @@ config PANEL_SONY_ACX565AKM
help
This is the LCD panel used on Nokia N900
+config PANEL_LGPHILIPS_LB035Q02_NEW
+ tristate "LG.Philips LB035Q02 LCD Panel"
+ depends on SPI
+ help
+ LCD Panel used on the Gumstix Overo Palo35
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index eff4b8a..3a1af4a 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
obj-$(CONFIG_PANEL_DPI) += panel-dpi.o
obj-$(CONFIG_PANEL_DSI_CM) += panel-dsi-cm.o
obj-$(CONFIG_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02_NEW) += panel-lgphilips-lb035q02.o
diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
new file mode 100644
index 0000000..6e8977b
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -0,0 +1,358 @@
+/*
+ * LG.Philips LB035Q02 LCD Panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ * Based on a driver by: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static struct omap_video_timings lb035q02_timings = {
+ .x_res = 320,
+ .y_res = 240,
+
+ .pixel_clock = 6500,
+
+ .hsw = 2,
+ .hfp = 20,
+ .hbp = 68,
+
+ .vsw = 2,
+ .vfp = 4,
+ .vbp = 18,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
+ .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ struct spi_device *spi;
+
+ int data_lines;
+
+ struct omap_video_timings videomode;
+
+ int reset_gpio;
+ int backlight_gpio;
+ int enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
+{
+ struct spi_message msg;
+ struct spi_transfer index_xfer = {
+ .len = 3,
+ .cs_change = 1,
+ };
+ struct spi_transfer value_xfer = {
+ .len = 3,
+ };
+ u8 buffer[16];
+
+ spi_message_init(&msg);
+
+ /* register index */
+ buffer[0] = 0x70;
+ buffer[1] = 0x00;
+ buffer[2] = reg & 0x7f;
+ index_xfer.tx_buf = buffer;
+ spi_message_add_tail(&index_xfer, &msg);
+
+ /* register value */
+ buffer[4] = 0x72;
+ buffer[5] = val >> 8;
+ buffer[6] = val;
+ value_xfer.tx_buf = buffer + 4;
+ spi_message_add_tail(&value_xfer, &msg);
+
+ return spi_sync(spi, &msg);
+}
+
+static void init_lb035q02_panel(struct spi_device *spi)
+{
+ /* Init sequence from page 28 of the lb035q02 spec */
+ lb035q02_write_reg(spi, 0x01, 0x6300);
+ lb035q02_write_reg(spi, 0x02, 0x0200);
+ lb035q02_write_reg(spi, 0x03, 0x0177);
+ lb035q02_write_reg(spi, 0x04, 0x04c7);
+ lb035q02_write_reg(spi, 0x05, 0xffc0);
+ lb035q02_write_reg(spi, 0x06, 0xe806);
+ lb035q02_write_reg(spi, 0x0a, 0x4008);
+ lb035q02_write_reg(spi, 0x0b, 0x0000);
+ lb035q02_write_reg(spi, 0x0d, 0x0030);
+ lb035q02_write_reg(spi, 0x0e, 0x2800);
+ lb035q02_write_reg(spi, 0x0f, 0x0000);
+ lb035q02_write_reg(spi, 0x16, 0x9f80);
+ lb035q02_write_reg(spi, 0x17, 0x0a0f);
+ lb035q02_write_reg(spi, 0x1e, 0x00c1);
+ lb035q02_write_reg(spi, 0x30, 0x0300);
+ lb035q02_write_reg(spi, 0x31, 0x0007);
+ lb035q02_write_reg(spi, 0x32, 0x0000);
+ lb035q02_write_reg(spi, 0x33, 0x0000);
+ lb035q02_write_reg(spi, 0x34, 0x0707);
+ lb035q02_write_reg(spi, 0x35, 0x0004);
+ lb035q02_write_reg(spi, 0x36, 0x0302);
+ lb035q02_write_reg(spi, 0x37, 0x0202);
+ lb035q02_write_reg(spi, 0x3a, 0x0a0d);
+ lb035q02_write_reg(spi, 0x3b, 0x0806);
+}
+
+static int lb035q02_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.dpi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ init_lb035q02_panel(ddata->spi);
+
+ return 0;
+}
+
+static void lb035q02_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int lb035q02_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ in->ops.dpi->set_timings(in, &ddata->videomode);
+
+ r = in->ops.dpi->enable(in);
+ if (r)
+ return r;
+
+ if (gpio_is_valid(ddata->enable_gpio))
+ gpio_set_value_cansleep(ddata->enable_gpio, 1);
+
+ if (gpio_is_valid(ddata->backlight_gpio))
+ gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void lb035q02_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ if (gpio_is_valid(ddata->enable_gpio))
+ gpio_set_value_cansleep(ddata->enable_gpio, 0);
+
+ if (gpio_is_valid(ddata->backlight_gpio))
+ gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+ in->ops.dpi->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void lb035q02_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->videomode = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.dpi->set_timings(in, timings);
+}
+
+static void lb035q02_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->videomode;
+}
+
+static int lb035q02_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver lb035q02_ops = {
+ .connect = lb035q02_connect,
+ .disconnect = lb035q02_disconnect,
+
+ .enable = lb035q02_enable,
+ .disable = lb035q02_disable,
+
+ .set_timings = lb035q02_set_timings,
+ .get_timings = lb035q02_get_timings,
+ .check_timings = lb035q02_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+};
+
+static int lb035q02_probe_pdata(struct spi_device *spi)
+{
+ const struct panel_lb035q02_platform_data *pdata;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *dssdev, *in;
+
+ pdata = dev_get_platdata(&spi->dev);
+
+ in = omap_dss_find_output(pdata->source);
+ if (in = NULL) {
+ dev_err(&spi->dev, "failed to find video source '%s'\n",
+ pdata->source);
+ return -EPROBE_DEFER;
+ }
+
+ ddata->in = in;
+
+ ddata->data_lines = pdata->data_lines;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ ddata->enable_gpio = pdata->enable_gpio;
+ ddata->backlight_gpio = pdata->backlight_gpio;
+
+ return 0;
+}
+
+static int lb035q02_panel_spi_probe(struct spi_device *spi)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+ if (ddata = NULL)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, ddata);
+
+ ddata->spi = spi;
+
+ if (dev_get_platdata(&spi->dev)) {
+ r = lb035q02_probe_pdata(spi);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ if (gpio_is_valid(ddata->enable_gpio)) {
+ r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
+ GPIOF_OUT_INIT_LOW, "panel enable");
+ if (r)
+ goto err_gpio;
+ }
+
+ if (gpio_is_valid(ddata->backlight_gpio)) {
+ r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
+ GPIOF_OUT_INIT_LOW, "panel backlight");
+ if (r)
+ goto err_gpio;
+ }
+
+ ddata->videomode = lb035q02_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->dev = &spi->dev;
+ dssdev->driver = &lb035q02_ops;
+ dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = ddata->videomode;
+ dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&spi->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+err_gpio:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int lb035q02_panel_spi_remove(struct spi_device *spi)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_display(dssdev);
+
+ lb035q02_disable(dssdev);
+ lb035q02_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct spi_driver lb035q02_spi_driver = {
+ .probe = lb035q02_panel_spi_probe,
+ .remove = lb035q02_panel_spi_remove,
+ .driver = {
+ .name = "panel_lgphilips_lb035q02",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_spi_driver(lb035q02_spi_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
+MODULE_LICENSE("GPL");
--
1.8.1.2
^ permalink raw reply related
* [PATCH 25/27] ARM: OMAP: fix dsi regulator names
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
board-cm-t35.c and board-ldp.c contain regulator supply entries for
vdds_dsi. However, the given device name is wrong.
This patch fixes the device name from omapdss_dsi1 to omapdss_dsi.0.
Note that as far as I know, DSI driver is not used on these boards, so
this should not have caused any problems.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-cm-t35.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ee6218c..ce00968 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -293,7 +293,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card = max 220 mA) */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d0d17bc..3dbc881 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -272,7 +272,7 @@ static struct regulator_init_data ldp_vaux1 = {
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_init_data ldp_vpll2 = {
--
1.8.1.2
^ permalink raw reply related
* [PATCH 26/27] ARM: OMAP: add vdds_dsi supply for dpi.0
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
DPI driver gets currently the vdds_dsi regulator via omapdss device.
This is not correct, and we'll change the DPI driver to get the
regulator directly.
This patch changes the relevant board files to add vdds_dsi supply for
dpi.0 device.
Note that the vdds_dsi supply for omapdss device is still left there, as
the current display driver uses it. When both the board files and the
display driver has been changed, we can remove the unused supply.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-cm-t35.c | 1 +
arch/arm/mach-omap2/board-devkit8000.c | 1 +
arch/arm/mach-omap2/board-ldp.c | 1 +
arch/arm/mach-omap2/board-omap3pandora.c | 1 +
arch/arm/mach-omap2/twl-common.c | 1 +
5 files changed, 5 insertions(+)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ce00968..d4622ed 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -293,6 +293,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 5764205..f1d91ba 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -222,6 +222,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3dbc881..62e4f70 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -272,6 +272,7 @@ static struct regulator_init_data ldp_vaux1 = {
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 28133d5..b1547a0 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -343,6 +343,7 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 51e138c..c05898f 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -140,6 +140,7 @@ static struct regulator_init_data omap3_vdac_idata = {
static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
--
1.8.1.2
^ permalink raw reply related
* [PATCH 27/27] ARM: OMAP: add vdds_sdi supply for sdi.0
From: Tomi Valkeinen @ 2013-05-30 9:36 UTC (permalink / raw)
To: linux-fbdev, linux-omap, Archit Taneja; +Cc: Tomi Valkeinen
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
SDI driver gets currently the vdds_sdi regulator via omapdss device.
This is not correct, and we'll change the SDI driver to get the
regulator directly.
This patch changes the rx51 board file to add vdds_dsi supply for sdi.0
device.
Note that the vdds_sdi supply for omapdss device is still left there, as
the current display driver uses it. When both the board files and the
display driver has been changed, we can remove the unused supply.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e35e0b6..c3270c0 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -565,6 +565,7 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"),
/* Si4713 supply */
REGULATOR_SUPPLY("vdd", "2-0063"),
/* lis3lv02d */
--
1.8.1.2
^ permalink raw reply related
* [PATCH v2 1/3] video: xilinxfb: Fix OF probing on little-endian systems
From: Michal Simek @ 2013-05-30 9:41 UTC (permalink / raw)
To: linux-kernel
Cc: Michal Simek, Michal Simek, Florian Tobias Schandinat,
Grant Likely, Rob Herring, linux-fbdev, devicetree-discuss
[-- Attachment #1: Type: text/plain, Size: 1224 bytes --]
From: Michal Simek <monstr@monstr.eu>
DTB is always big-endian that's why is necessary
to convert it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2:
- use of_property_read_u32 helper function
drivers/video/xilinxfb.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index af0b4fd..aecd15d 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -406,8 +406,7 @@ static int xilinxfb_release(struct device *dev)
static int xilinxfb_of_probe(struct platform_device *op)
{
const u32 *prop;
- u32 *p;
- u32 tft_access;
+ u32 tft_access = 0;
struct xilinxfb_platform_data pdata;
struct resource res;
int size, rc;
@@ -427,8 +426,8 @@ static int xilinxfb_of_probe(struct platform_device *op)
* To check whether the core is connected directly to DCR or PLB
* interface and initialize the tft_access accordingly.
*/
- p = (u32 *)of_get_property(op->dev.of_node, "xlnx,dcr-splb-slave-if", NULL);
- tft_access = p ? *p : 0;
+ of_property_read_u32(op->dev.of_node, "xlnx,dcr-splb-slave-if",
+ &tft_access);
/*
* Fill the resource structure if its direct PLB interface
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related
* [PATCH v2 2/3] video: xilinxfb: Do not use out_be32 IO function
From: Michal Simek @ 2013-05-30 9:41 UTC (permalink / raw)
To: linux-kernel
Cc: Michal Simek, Michal Simek, Florian Tobias Schandinat,
linux-fbdev
In-Reply-To: <27e53d5633766ab0dc1ac492023d5a0d0199e3aa.1369906849.git.michal.simek@xilinx.com>
[-- Attachment #1: Type: text/plain, Size: 3215 bytes --]
out_be32 IO function is not supported by ARM.
It is only available for PPC and Microblaze.
Remove all out_be32 references and start to use __raw_writel
function.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2: None
drivers/video/xilinxfb.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index aecd15d..000185a 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -57,7 +57,7 @@
* In case of direct PLB access the second control register will be at
* an offset of 4 as compared to the DCR access where the offset is 1
* i.e. REG_CTRL. So this is taken care in the function
- * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * xilinx_fb_out32 where it left shifts the offset 2 times in case of
* direct PLB access.
*/
#define NUM_REGS 2
@@ -150,11 +150,11 @@ struct xilinxfb_drvdata {
* To perform the read/write on the registers we need to check on
* which bus its connected and call the appropriate write API.
*/
-static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
u32 val)
{
if (drvdata->flags & PLB_ACCESS_FLAG)
- out_be32(drvdata->regs + (offset << 2), val);
+ __raw_writel(val, drvdata->regs + (offset << 2));
#ifdef CONFIG_PPC_DCR
else
dcr_write(drvdata->dcr_host, offset, val);
@@ -197,7 +197,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
switch (blank_mode) {
case FB_BLANK_UNBLANK:
/* turn on panel */
- xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+ xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
break;
case FB_BLANK_NORMAL:
@@ -205,7 +205,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_POWERDOWN:
/* turn off panel */
- xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+ xilinx_fb_out32(drvdata, REG_CTRL, 0);
default:
break;
@@ -280,13 +280,13 @@ static int xilinxfb_assign(struct device *dev,
memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
/* Tell the hardware where the frame buffer is */
- xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
+ xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
/* Turn on the display */
drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
if (pdata->rotate_screen)
drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
- xilinx_fb_out_be32(drvdata, REG_CTRL,
+ xilinx_fb_out32(drvdata, REG_CTRL,
drvdata->reg_ctrl_default);
/* Fill struct fb_info */
@@ -345,7 +345,7 @@ err_cmap:
iounmap(drvdata->fb_virt);
/* Turn off the display */
- xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+ xilinx_fb_out32(drvdata, REG_CTRL, 0);
err_fbmem:
if (drvdata->flags & PLB_ACCESS_FLAG)
@@ -381,7 +381,7 @@ static int xilinxfb_release(struct device *dev)
iounmap(drvdata->fb_virt);
/* Turn off the display */
- xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+ xilinx_fb_out32(drvdata, REG_CTRL, 0);
/* Release the resources, as allocated based on interface */
if (drvdata->flags & PLB_ACCESS_FLAG) {
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related
* [PATCH v2 3/3] video: xilinxfb: Use driver for Xilinx ARM Zynq
From: Michal Simek @ 2013-05-30 9:41 UTC (permalink / raw)
To: linux-kernel
Cc: Michal Simek, Michal Simek, Florian Tobias Schandinat,
linux-fbdev
In-Reply-To: <27e53d5633766ab0dc1ac492023d5a0d0199e3aa.1369906849.git.michal.simek@xilinx.com>
[-- Attachment #1: Type: text/plain, Size: 697 bytes --]
From: Michal Simek <monstr@monstr.eu>
Enable this driver for all Xilinx platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2: None
drivers/video/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2e937bd..2c301f8 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2188,7 +2188,7 @@ config FB_PS3_DEFAULT_SIZE_M
config FB_XILINX
tristate "Xilinx frame buffer support"
- depends on FB && (XILINX_VIRTEX || MICROBLAZE)
+ depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
--
1.8.2.3
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox