* Re: [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks
From: Ben Hutchings @ 2013-09-20 1:21 UTC (permalink / raw)
To: Russell King
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw,
b43-dev-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
devicetree-u79uwXL29TY76Z2rM5mHXA,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
e1000-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-crypto-u79uwXL29TY76Z2rM5mHXA,
linux-doc-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
linux-ide-u79uwXL29TY76Z2rM5mHXA,
linux-media-u79uwXL29TY76Z2rM5mHXA,
linux-mmc-u79uwXL29TY76Z2rM5mHXA,
linux-nvme-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA, Solarflare linux maintainers,
uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b, Rob Landley,
Vinod Koul, Dan
In-Reply-To: <E1VMlja-0007fA-HU-eh5Bv4kxaXIANfyc6IWni62ZND6+EDdj@public.gmane.org>
On Thu, 2013-09-19 at 22:25 +0100, Russell King wrote:
> Provide a helper to set both the DMA and coherent DMA masks to the
> same value - this avoids duplicated code in a number of drivers,
> sometimes with buggy error handling, and also allows us identify
> which drivers do things differently.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> ---
> Documentation/DMA-API-HOWTO.txt | 37 ++++++++++++++++++++++---------------
> Documentation/DMA-API.txt | 8 ++++++++
> include/linux/dma-mapping.h | 14 ++++++++++++++
> 3 files changed, 44 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
> index 14129f1..5e98303 100644
> --- a/Documentation/DMA-API-HOWTO.txt
> +++ b/Documentation/DMA-API-HOWTO.txt
[...]
> -dma_set_coherent_mask() will always be able to set the same or a
> -smaller mask as dma_set_mask(). However for the rare case that a
> +The coherent coherent mask will always be able to set the same or a
> +smaller mask as the streaming mask. However for the rare case that a
[...]
The new wording doesn't make sense; a mask doesn't set itself. I would
suggest:
"The coherent mask can always be set to the same or a smaller mask than
the streaming mask."
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* [PATCH 1/2] framebuffer: Add fb_<level> convenience logging macros
From: Joe Perches @ 2013-09-20 1:35 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-fbdev, linux-kernel
Add fb_<level> convenience macros for emitting the
"fb%d: ", struct fb_info->node value.
Neatens and shortens the code a bit.
Signed-off-by: Joe Perches <joe@perches.com>
---
include/linux/fb.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ffac70a..70c4836 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -792,4 +792,16 @@ extern int fb_find_mode(struct fb_var_screeninfo *var,
const struct fb_videomode *default_mode,
unsigned int default_bpp);
+/* Convenience logging macros */
+#define fb_err(fb_info, fmt, ...) \
+ pr_err("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_notice(info, fmt, ...) \
+ pr_notice("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_warn(fb_info, fmt, ...) \
+ pr_warn("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_info(fb_info, fmt, ...) \
+ pr_info("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+#define fb_dbg(fb_info, fmt, ...) \
+ pr_debug("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)
+
#endif /* _LINUX_FB_H */
--
1.8.1.2.459.gbcd45b4.dirty
^ permalink raw reply related
* [PATCH 2/2] framebuffer: Use fb_<level>
From: Joe Perches @ 2013-09-20 1:35 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-fbdev, linux-kernel
In-Reply-To: <0926c7a34ac51c4cbb67debd0d883f41891e75d9.1379640011.git.joe@perches.com>
Neaten and shorten the code using the new fb_<level> macros.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/auxdisplay/cfag12864bfb.c | 3 +-
drivers/video/68328fb.c | 9 +++---
drivers/video/amifb.c | 4 +--
drivers/video/arcfb.c | 8 ++---
drivers/video/arkfb.c | 46 +++++++++++++-------------
drivers/video/asiliantfb.c | 4 +--
drivers/video/atafb.c | 7 ++--
drivers/video/aty/aty128fb.c | 4 +--
drivers/video/broadsheetfb.c | 5 ++-
drivers/video/carminefb.c | 3 +-
drivers/video/cobalt_lcdfb.c | 3 +-
drivers/video/controlfb.c | 4 +--
drivers/video/efifb.c | 3 +-
drivers/video/fb-puv3.c | 5 ++-
drivers/video/fm2fb.c | 2 +-
drivers/video/gbefb.c | 6 ++--
drivers/video/geode/gx1fb_core.c | 2 +-
drivers/video/geode/gxfb_core.c | 2 +-
drivers/video/geode/lxfb_core.c | 3 +-
drivers/video/gxt4500.c | 3 +-
drivers/video/hecubafb.c | 5 ++-
drivers/video/hgafb.c | 3 +-
drivers/video/hitfb.c | 3 +-
drivers/video/hpfb.c | 3 +-
drivers/video/i740fb.c | 8 ++---
drivers/video/igafb.c | 5 ++-
drivers/video/imsttfb.c | 4 +--
drivers/video/kyro/fbdev.c | 8 ++---
drivers/video/macfb.c | 3 +-
drivers/video/matrox/matroxfb_base.c | 6 ++--
drivers/video/mbx/mbxfb.c | 2 +-
drivers/video/neofb.c | 3 +-
drivers/video/nuc900fb.c | 3 +-
drivers/video/offb.c | 3 +-
drivers/video/platinumfb.c | 2 +-
drivers/video/pm2fb.c | 4 +--
drivers/video/pm3fb.c | 3 +-
drivers/video/pmag-ba-fb.c | 4 +--
drivers/video/pmagb-b-fb.c | 9 +++---
drivers/video/pvr2fb.c | 25 ++++++++-------
drivers/video/q40fb.c | 3 +-
drivers/video/s1d13xxxfb.c | 3 +-
drivers/video/s3fb.c | 62 +++++++++++++++++++-----------------
drivers/video/sgivwfb.c | 4 +--
drivers/video/sis/sis_main.c | 4 +--
drivers/video/skeletonfb.c | 3 +-
drivers/video/sstfb.c | 8 ++---
drivers/video/stifb.c | 4 +--
drivers/video/svgalib.c | 4 +--
drivers/video/tgafb.c | 4 +--
drivers/video/tmiofb.c | 3 +-
drivers/video/uvesafb.c | 6 ++--
drivers/video/valkyriefb.c | 2 +-
drivers/video/vesafb.c | 3 +-
drivers/video/vfb.c | 5 ++-
drivers/video/vga16fb.c | 3 +-
drivers/video/vt8623fb.c | 40 ++++++++++++-----------
drivers/video/w100fb.c | 5 ++-
drivers/video/wm8505fb.c | 12 +++----
59 files changed, 186 insertions(+), 224 deletions(-)
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index d585735..a387403 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -102,8 +102,7 @@ static int cfag12864bfb_probe(struct platform_device *device)
platform_set_drvdata(device, info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
- info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c
index fa44fbe..552258c 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/68328fb.c
@@ -478,11 +478,10 @@ int __init mc68x328fb_init(void)
return -EINVAL;
}
- printk(KERN_INFO
- "fb%d: %s frame buffer device\n", fb_info.node, fb_info.fix.id);
- printk(KERN_INFO
- "fb%d: %dx%dx%d at 0x%08lx\n", fb_info.node,
- mc68x328fb_default.xres_virtual, mc68x328fb_default.yres_virtual,
+ fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
+ fb_info(&fb_info, "%dx%dx%d at 0x%08lx\n",
+ mc68x328fb_default.xres_virtual,
+ mc68x328fb_default.yres_virtual,
1 << mc68x328fb_default.bits_per_pixel, videomemory);
return 0;
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index a6780ee..aaa1691 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -3742,8 +3742,8 @@ default_chipset:
if (err)
goto unset_drvdata;
- printk("fb%d: %s frame buffer device, using %dK of video memory\n",
- info->node, info->fix.id, info->fix.smem_len>>10);
+ fb_info(info, "%s frame buffer device, using %dK of video memory\n",
+ info->fix.id, info->fix.smem_len>>10);
return 0;
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index e43401a..1b0b233 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -556,9 +556,8 @@ static int arcfb_probe(struct platform_device *dev)
goto err1;
}
}
- printk(KERN_INFO
- "fb%d: Arc frame buffer device, using %dK of video memory\n",
- info->node, videomemorysize >> 10);
+ fb_info(info, "Arc frame buffer device, using %dK of video memory\n",
+ videomemorysize >> 10);
/* this inits the lcd but doesn't clear dirty pixels */
for (i = 0; i < num_cols * num_rows; i++) {
@@ -572,8 +571,7 @@ static int arcfb_probe(struct platform_device *dev)
/* if we were told to splash the screen, we just clear it */
if (!nosplash) {
for (i = 0; i < num_cols * num_rows; i++) {
- printk(KERN_INFO "fb%d: splashing lcd %d\n",
- info->node, i);
+ fb_info(info, "splashing lcd %d\n", i);
ks108_set_start_line(par, i, 0);
ks108_clear_lcd(par, i);
}
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 94a51f1..ee0f1a1 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -137,8 +137,7 @@ static void arkfb_settile(struct fb_info *info, struct fb_tilemap *map)
if ((map->width != 8) || (map->height != 16) ||
(map->depth != 1) || (map->length != 256)) {
- printk(KERN_ERR "fb%d: unsupported font parameters: width %d, "
- "height %d, depth %d, length %d\n", info->node,
+ fb_err(info, "unsupported font parameters: width %d, height %d, depth %d, length %d\n",
map->width, map->height, map->depth, map->length);
return;
}
@@ -517,7 +516,7 @@ static void ark_set_pixclock(struct fb_info *info, u32 pixclock)
int rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock);
if (rv < 0) {
- printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
+ fb_err(info, "cannot set requested pixclock, keeping old value\n");
return;
}
@@ -584,7 +583,7 @@ static int arkfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
rv = svga_match_format (arkfb_formats, var, NULL);
if (rv < 0)
{
- printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
+ fb_err(info, "unsupported mode requested\n");
return rv;
}
@@ -604,14 +603,15 @@ static int arkfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
if (mem > info->screen_size)
{
- printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
+ fb_err(info, "not enough framebuffer memory (%d kB requested, %d kB available)\n",
+ mem >> 10, (unsigned int) (info->screen_size >> 10));
return -EINVAL;
}
rv = svga_check_timings (&ark_timing_regs, var, info->node);
if (rv < 0)
{
- printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
+ fb_err(info, "invalid timings requested\n");
return rv;
}
@@ -693,7 +693,7 @@ static int arkfb_set_par(struct fb_info *info)
vga_wseq(par->state.vgabase, 0x18, regval);
/* Set the offset register */
- pr_debug("fb%d: offset register : %d\n", info->node, offset_value);
+ fb_dbg(info, "offset register : %d\n", offset_value);
svga_wcrt_multi(par->state.vgabase, ark_offset_regs, offset_value);
/* fix for hi-res textmode */
@@ -716,7 +716,7 @@ static int arkfb_set_par(struct fb_info *info)
/* Set mode-specific register values */
switch (mode) {
case 0:
- pr_debug("fb%d: text mode\n", info->node);
+ fb_dbg(info, "text mode\n");
svga_set_textmode_vga_regs(par->state.vgabase);
vga_wseq(par->state.vgabase, 0x11, 0x10); /* basic VGA mode */
@@ -725,7 +725,7 @@ static int arkfb_set_par(struct fb_info *info)
break;
case 1:
- pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
+ fb_dbg(info, "4 bit pseudocolor\n");
vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
vga_wseq(par->state.vgabase, 0x11, 0x10); /* basic VGA mode */
@@ -733,44 +733,44 @@ static int arkfb_set_par(struct fb_info *info)
dac_set_mode(par->dac, DAC_PSEUDO8_8);
break;
case 2:
- pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
+ fb_dbg(info, "4 bit pseudocolor, planar\n");
vga_wseq(par->state.vgabase, 0x11, 0x10); /* basic VGA mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x00, 0x04); /* 8bit pixel path */
dac_set_mode(par->dac, DAC_PSEUDO8_8);
break;
case 3:
- pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
+ fb_dbg(info, "8 bit pseudocolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x16); /* 8bpp accel mode */
if (info->var.pixclock > 20000) {
- pr_debug("fb%d: not using multiplex\n", info->node);
+ fb_dbg(info, "not using multiplex\n");
svga_wcrt_mask(par->state.vgabase, 0x46, 0x00, 0x04); /* 8bit pixel path */
dac_set_mode(par->dac, DAC_PSEUDO8_8);
} else {
- pr_debug("fb%d: using multiplex\n", info->node);
+ fb_dbg(info, "using multiplex\n");
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
dac_set_mode(par->dac, DAC_PSEUDO8_16);
hdiv = 2;
}
break;
case 4:
- pr_debug("fb%d: 5/5/5 truecolor\n", info->node);
+ fb_dbg(info, "5/5/5 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x1A); /* 16bpp accel mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
dac_set_mode(par->dac, DAC_RGB1555_16);
break;
case 5:
- pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
+ fb_dbg(info, "5/6/5 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x1A); /* 16bpp accel mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
dac_set_mode(par->dac, DAC_RGB0565_16);
break;
case 6:
- pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
+ fb_dbg(info, "8/8/8 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x16); /* 8bpp accel mode ??? */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
@@ -779,7 +779,7 @@ static int arkfb_set_par(struct fb_info *info)
hdiv = 2;
break;
case 7:
- pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node);
+ fb_dbg(info, "8/8/8/8 truecolor\n");
vga_wseq(par->state.vgabase, 0x11, 0x1E); /* 32bpp accel mode */
svga_wcrt_mask(par->state.vgabase, 0x46, 0x04, 0x04); /* 16bit pixel path */
@@ -787,7 +787,7 @@ static int arkfb_set_par(struct fb_info *info)
hmul = 2;
break;
default:
- printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node);
+ fb_err(info, "unsupported mode - bug\n");
return -EINVAL;
}
@@ -879,19 +879,19 @@ static int arkfb_blank(int blank_mode, struct fb_info *info)
switch (blank_mode) {
case FB_BLANK_UNBLANK:
- pr_debug("fb%d: unblank\n", info->node);
+ fb_dbg(info, "unblank\n");
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
break;
case FB_BLANK_NORMAL:
- pr_debug("fb%d: blank\n", info->node);
+ fb_dbg(info, "blank\n");
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x80, 0x80);
break;
case FB_BLANK_POWERDOWN:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_VSYNC_SUSPEND:
- pr_debug("fb%d: sync down\n", info->node);
+ fb_dbg(info, "sync down\n");
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
svga_wcrt_mask(par->state.vgabase, 0x17, 0x00, 0x80);
break;
@@ -1052,8 +1052,8 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto err_reg_fb;
}
- printk(KERN_INFO "fb%d: %s on %s, %d MB RAM\n", info->node, info->fix.id,
- pci_name(dev), info->fix.smem_len >> 20);
+ fb_info(info, "%s on %s, %d MB RAM\n",
+ info->fix.id, pci_name(dev), info->fix.smem_len >> 20);
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index d5a37d6..d611f1a 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -527,8 +527,8 @@ static int init_asiliant(struct fb_info *p, unsigned long addr)
return err;
}
- printk(KERN_INFO "fb%d: Asiliant 69000 frame buffer (%dK RAM detected)\n",
- p->node, p->fix.smem_len / 1024);
+ fb_info(p, "Asiliant 69000 frame buffer (%dK RAM detected)\n",
+ p->fix.smem_len / 1024);
writeb(0xff, mmio_base + 0x78c);
chips_hw_init(p);
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 64e41f5..e21d1f5 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -3246,11 +3246,8 @@ int __init atafb_init(void)
return -EINVAL;
}
- // FIXME: mode needs setting!
- //printk("fb%d: %s frame buffer device, using %dK of video memory\n",
- // fb_info.node, fb_info.mode->name, screen_len>>10);
- printk("fb%d: frame buffer device, using %dK of video memory\n",
- fb_info.node, screen_len >> 10);
+ fb_info(&fb_info, "frame buffer device, using %dK of video memory\n",
+ screen_len >> 10);
/* TODO: This driver cannot be unloaded yet */
return 0;
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index a4dfe8c..d660f65 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2029,8 +2029,8 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
if (register_framebuffer(info) < 0)
return 0;
- printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
- info->node, info->fix.id, video_card);
+ fb_info(info, "%s frame buffer device on %s\n",
+ info->fix.id, video_card);
return 1; /* success! */
}
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index b09701c..5d11a6a 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -1167,9 +1167,8 @@ static int broadsheetfb_probe(struct platform_device *dev)
if (retval < 0)
goto err_unreg_fb;
- printk(KERN_INFO
- "fb%d: Broadsheet frame buffer, using %dK of video memory\n",
- info->node, videomemorysize >> 10);
+ fb_info(info, "Broadsheet frame buffer, using %dK of video memory\n",
+ videomemorysize >> 10);
return 0;
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index 153dd65..4940079 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -585,8 +585,7 @@ static int alloc_carmine_fb(void __iomem *regs, void __iomem *smem_base,
if (ret < 0)
goto err_dealloc_cmap;
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
- info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
*rinfo = info;
return 0;
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index a903149..1387ad6 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -368,8 +368,7 @@ static int cobalt_lcdfb_probe(struct platform_device *dev)
lcd_clear(info);
- printk(KERN_INFO "fb%d: Cobalt server LCD frame buffer device\n",
- info->node);
+ fb_info(info, "Cobalt server LCD frame buffer device\n");
return 0;
}
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 67b77b4..fdadef9 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -471,8 +471,8 @@ try_again:
/* Register with fbdev layer */
if (register_framebuffer(&p->info) < 0)
return -ENXIO;
-
- printk(KERN_INFO "fb%d: control display adapter\n", p->info.node);
+
+ fb_info(&p->info, "control display adapter\n");
return 0;
}
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 7f9ff75..e58f45c 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -322,8 +322,7 @@ static int efifb_probe(struct platform_device *dev)
printk(KERN_ERR "efifb: cannot register framebuffer\n");
goto err_fb_dealoc;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err_fb_dealoc:
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
index 27fc956..6db9ebd 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fb-puv3.c
@@ -713,9 +713,8 @@ static int unifb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM);
- printk(KERN_INFO
- "fb%d: Virtual frame buffer device, using %dM of video memory\n",
- info->node, UNIFB_MEMSIZE >> 20);
+ fb_info(info, "Virtual frame buffer device, using %dM of video memory\n",
+ UNIFB_MEMSIZE >> 20);
return 0;
err2:
fb_dealloc_cmap(&info->cmap);
diff --git a/drivers/video/fm2fb.c b/drivers/video/fm2fb.c
index c99c967..e69d47a 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fm2fb.c
@@ -289,7 +289,7 @@ static int fm2fb_probe(struct zorro_dev *z, const struct zorro_device_id *id)
zorro_release_device(z);
return -EINVAL;
}
- printk("fb%d: %s frame buffer device\n", info->node, fb_fix.id);
+ fb_info(info, "%s frame buffer device\n", fb_fix.id);
return 0;
}
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index ceab370..4c7cb36 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1236,9 +1236,9 @@ static int gbefb_probe(struct platform_device *p_dev)
platform_set_drvdata(p_dev, info);
gbefb_create_sysfs(&p_dev->dev);
- printk(KERN_INFO "fb%d: %s rev %d @ 0x%08x using %dkB memory\n",
- info->node, info->fix.id, gbe_revision, (unsigned) GBE_BASE,
- gbe_mem_size >> 10);
+ fb_info(info, "%s rev %d @ 0x%08x using %dkB memory\n",
+ info->fix.id, gbe_revision, (unsigned)GBE_BASE,
+ gbe_mem_size >> 10);
return 0;
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c
index ebbaada..040bc66 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/geode/gx1fb_core.c
@@ -357,7 +357,7 @@ static int gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err;
}
pci_set_drvdata(pdev, info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err:
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 19f0c1ad..a5ec51f 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -423,7 +423,7 @@ static int gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err;
}
pci_set_drvdata(pdev, info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err:
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c
index 4dd7b55..5bcde80 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/geode/lxfb_core.c
@@ -555,8 +555,7 @@ static int lxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err;
}
pci_set_drvdata(pdev, info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
diff --git a/drivers/video/gxt4500.c b/drivers/video/gxt4500.c
index c35663f..135d78a 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/gxt4500.c
@@ -698,8 +698,7 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "gxt4500: cannot register framebuffer\n");
goto err_free_cmap;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
index 59d2318..906026f 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/hecubafb.c
@@ -261,9 +261,8 @@ static int hecubafb_probe(struct platform_device *dev)
goto err_fbreg;
platform_set_drvdata(dev, info);
- printk(KERN_INFO
- "fb%d: Hecuba frame buffer device, using %dK of video memory\n",
- info->node, videomemorysize >> 10);
+ fb_info(info, "Hecuba frame buffer device, using %dK of video memory\n",
+ videomemorysize >> 10);
/* this inits the dpy */
retval = par->board->init(par);
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index 1e9e2d8..5ff9fe2 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -586,8 +586,7 @@ static int hgafb_probe(struct platform_device *pdev)
return -EINVAL;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
platform_set_drvdata(pdev, info);
return 0;
}
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index c2414d6..a648d51 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -405,8 +405,7 @@ static int hitfb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
diff --git a/drivers/video/hpfb.c b/drivers/video/hpfb.c
index b802f93..a1b7e5f 100644
--- a/drivers/video/hpfb.c
+++ b/drivers/video/hpfb.c
@@ -298,8 +298,7 @@ static int hpfb_init_one(unsigned long phys_base, unsigned long virt_base)
if (ret < 0)
goto dealloc_cmap;
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- fb_info.node, fb_info.fix.id);
+ fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
return 0;
diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
index 6c48388..985bae4 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/i740fb.c
@@ -203,8 +203,7 @@ static int i740fb_release(struct fb_info *info, int user)
mutex_lock(&(par->open_lock));
if (par->ref_count = 0) {
- printk(KERN_ERR "fb%d: release called with zero refcount\n",
- info->node);
+ fb_err(info, "release called with zero refcount\n");
mutex_unlock(&(par->open_lock));
return -EINVAL;
}
@@ -1067,7 +1066,7 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
(tmp & DRAM_RAS_PRECHARGE));
- printk(KERN_INFO "fb%d: Intel740 on %s, %ld KB %s\n", info->node,
+ fb_info(info, "Intel740 on %s, %ld KB %s\n",
pci_name(dev), info->screen_size >> 10,
par->has_sgram ? "SGRAM" : "SDRAM");
@@ -1143,8 +1142,7 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
goto err_reg_framebuffer;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index 79cbfa7..486f188 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -360,9 +360,8 @@ static int __init iga_init(struct fb_info *info, struct iga_par *par)
if (register_framebuffer(info) < 0)
return 0;
- printk("fb%d: %s frame buffer device at 0x%08lx [%dMB VRAM]\n",
- info->node, info->fix.id,
- par->frame_buffer_phys, info->fix.smem_len >> 20);
+ fb_info(info, "%s frame buffer device at 0x%08lx [%dMB VRAM]\n",
+ info->fix.id, par->frame_buffer_phys, info->fix.smem_len >> 20);
iga_blank_border(par);
return 1;
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index d5220cc..aae10ce 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -1461,8 +1461,8 @@ static void init_imstt(struct fb_info *info)
}
tmp = (read_reg_le32(par->dc_regs, SSTATUS) & 0x0f00) >> 8;
- printk("fb%u: %s frame buffer; %uMB vram; chip version %u\n",
- info->node, info->fix.id, info->fix.smem_len >> 20, tmp);
+ fb_info(info, "%s frame buffer; %uMB vram; chip version %u\n",
+ info->fix.id, info->fix.smem_len >> 20, tmp);
}
static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/kyro/fbdev.c
index 6157f74..7fb500a 100644
--- a/drivers/video/kyro/fbdev.c
+++ b/drivers/video/kyro/fbdev.c
@@ -736,10 +736,10 @@ static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (register_framebuffer(info) < 0)
goto out_unmap;
- printk("fb%d: %s frame buffer device, at %dx%d@%d using %ldk/%ldk of VRAM\n",
- info->node, info->fix.id, info->var.xres,
- info->var.yres, info->var.bits_per_pixel, size >> 10,
- (unsigned long)info->fix.smem_len >> 10);
+ fb_info(info, "%s frame buffer device, at %dx%d@%d using %ldk/%ldk of VRAM\n",
+ info->fix.id,
+ info->var.xres, info->var.yres, info->var.bits_per_pixel,
+ size >> 10, (unsigned long)info->fix.smem_len >> 10);
pci_set_drvdata(pdev, info);
diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c
index fe01add..5bd2eb8 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/macfb.c
@@ -913,8 +913,7 @@ static int __init macfb_init(void)
if (err)
goto fail_dealloc;
- pr_info("fb%d: %s frame buffer device\n",
- fb_info.node, fb_info.fix.id);
+ fb_info(&fb_info, "%s frame buffer device\n", fb_info.fix.id);
return 0;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 2456529..87c64ff 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -1893,14 +1893,12 @@ static int initMatrox2(struct matrox_fb_info *minfo, struct board *b)
if (register_framebuffer(&minfo->fbcon) < 0) {
goto failVideoIO;
}
- printk("fb%d: %s frame buffer device\n",
- minfo->fbcon.node, minfo->fbcon.fix.id);
+ fb_info(&minfo->fbcon, "%s frame buffer device\n", minfo->fbcon.fix.id);
/* there is no console on this fb... but we have to initialize hardware
* until someone tells me what is proper thing to do */
if (!minfo->initialized) {
- printk(KERN_INFO "fb%d: initializing hardware\n",
- minfo->fbcon.node);
+ fb_info(&minfo->fbcon, "initializing hardware\n");
/* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
* already before, so register_framebuffer works correctly. */
vesafb_defined.activate |= FB_ACTIVATE_FORCE;
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index 0c1a874..e89cac0 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -976,7 +976,7 @@ static int mbxfb_probe(struct platform_device *dev)
platform_set_drvdata(dev, fbi);
- printk(KERN_INFO "fb%d: mbx frame buffer device\n", fbi->node);
+ fb_info(fbi, "mbx frame buffer device\n");
if (mfbi->platform_probe)
mfbi->platform_probe(fbi);
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index 7ef079c..26317b1 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -2104,8 +2104,7 @@ static int neofb_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (err < 0)
goto err_reg_fb;
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
/*
* Our driver data
diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c
index 796e511..af8b8f3 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/nuc900fb.c
@@ -647,8 +647,7 @@ static int nuc900fb_probe(struct platform_device *pdev)
goto free_cpufreq;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- fbinfo->node, fbinfo->fix.id);
+ fb_info(fbinfo, "%s frame buffer device\n", fbinfo->fix.id);
return 0;
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 0c4f343..9dbea22 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -515,8 +515,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
if (register_framebuffer(info) < 0)
goto out_err;
- printk(KERN_INFO "fb%d: Open Firmware frame buffer device on %s\n",
- info->node, full_name);
+ fb_info(info, "Open Firmware frame buffer device on %s\n", full_name);
return;
out_err:
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 3d86bac..ff126439 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -403,7 +403,7 @@ try_again:
if (rc < 0)
return rc;
- printk(KERN_INFO "fb%d: Apple Platinum frame buffer device\n", info->node);
+ fb_info(info, "Apple Platinum frame buffer device\n");
return 0;
}
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 81354ee..6a1637e 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1694,8 +1694,8 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (retval < 0)
goto err_exit_all;
- printk(KERN_INFO "fb%d: %s frame buffer device, memory = %dK.\n",
- info->node, info->fix.id, pm2fb_fix.smem_len / 1024);
+ fb_info(info, "%s frame buffer device, memory = %dK\n",
+ info->fix.id, pm2fb_fix.smem_len / 1024);
/*
* Our driver data
diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c
index 7718faa..e31938d 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/pm3fb.c
@@ -1445,8 +1445,7 @@ static int pm3fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
retval = -EINVAL;
goto err_exit_all;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
- info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
pci_set_drvdata(dev, info);
return 0;
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index d1e46ce..914a52b 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -212,8 +212,8 @@ static int pmagbafb_probe(struct device *dev)
get_device(dev);
- pr_info("fb%d: %s frame buffer device at %s\n",
- info->node, info->fix.id, dev_name(dev));
+ fb_info(info, "%s frame buffer device at %s\n",
+ info->fix.id, dev_name(dev));
return 0;
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 0e13174..0822b6f 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -328,11 +328,10 @@ static int pmagbbfb_probe(struct device *dev)
snprintf(freq1, sizeof(freq1), "%u.%03uMHz",
par->osc1 / 1000, par->osc1 % 1000);
- pr_info("fb%d: %s frame buffer device at %s\n",
- info->node, info->fix.id, dev_name(dev));
- pr_info("fb%d: Osc0: %s, Osc1: %s, Osc%u selected\n",
- info->node, freq0, par->osc1 ? freq1 : "disabled",
- par->osc1 != 0);
+ fb_info(info, "%s frame buffer device at %s\n",
+ info->fix.id, dev_name(dev));
+ fb_info(info, "Osc0: %s, Osc1: %s, Osc%u selected\n",
+ freq0, par->osc1 ? freq1 : "disabled", par->osc1 != 0);
return 0;
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index df07860..167cfff 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -817,24 +817,25 @@ static int pvr2fb_common_init(void)
rev = fb_readl(par->mmio_base + 0x04);
- printk("fb%d: %s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n",
- fb_info->node, fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f,
- modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10));
- printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n",
- fb_info->node, fb_info->var.xres, fb_info->var.yres,
- fb_info->var.bits_per_pixel,
- get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel),
- (char *)pvr2_get_param(cables, NULL, cable_type, 3),
- (char *)pvr2_get_param(outputs, NULL, video_output, 3));
+ fb_info(fb_info, "%s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n",
+ fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f,
+ modememused >> 10,
+ (unsigned long)(fb_info->fix.smem_len >> 10));
+ fb_info(fb_info, "Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n",
+ fb_info->var.xres, fb_info->var.yres,
+ fb_info->var.bits_per_pixel,
+ get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel),
+ (char *)pvr2_get_param(cables, NULL, cable_type, 3),
+ (char *)pvr2_get_param(outputs, NULL, video_output, 3));
#ifdef CONFIG_SH_STORE_QUEUES
- printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node);
+ fb_notice(fb_info, "registering with SQ API\n");
pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len,
fb_info->fix.id, PAGE_SHARED);
- printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n",
- fb_info->node, pvr2fb_map);
+ fb_notice(fb_info, "Mapped video memory to SQ addr 0x%lx\n",
+ pvr2fb_map);
#endif
return 0;
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index d44c735..7487f76 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -119,8 +119,7 @@ static int q40fb_probe(struct platform_device *dev)
return -EINVAL;
}
- printk(KERN_INFO "fb%d: Q40 frame buffer alive and kicking !\n",
- info->node);
+ fb_info(info, "Q40 frame buffer alive and kicking !\n");
return 0;
}
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index 05c2dc3..312305b 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -901,8 +901,7 @@ static int s1d13xxxfb_probe(struct platform_device *pdev)
goto bail;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 47ca86c..2a135f5 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -306,8 +306,8 @@ static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map)
if ((map->width != 8) || (map->height != 16) ||
(map->depth != 1) || (map->length != 256)) {
- printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n",
- info->node, map->width, map->height, map->depth, map->length);
+ fb_err(info, "unsupported font parameters: width %d, height %d, depth %d, length %d\n",
+ map->width, map->height, map->depth, map->length);
return;
}
@@ -476,7 +476,7 @@ static void s3_set_pixclock(struct fb_info *info, u32 pixclock)
rv = svga_compute_pll((par->chip = CHIP_365_TRIO3D) ? &s3_trio3d_pll : &s3_pll,
1000000000 / pixclock, &m, &n, &r, info->node);
if (rv < 0) {
- printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
+ fb_err(info, "cannot set requested pixclock, keeping old value\n");
return;
}
@@ -569,7 +569,7 @@ static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
rv = -EINVAL;
if (rv < 0) {
- printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
+ fb_err(info, "unsupported mode requested\n");
return rv;
}
@@ -587,22 +587,21 @@ static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
/* Check whether have enough memory */
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
if (mem > info->screen_size) {
- printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n",
- info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
+ fb_err(info, "not enough framebuffer memory (%d kB requested , %u kB available)\n",
+ mem >> 10, (unsigned int) (info->screen_size >> 10));
return -EINVAL;
}
rv = svga_check_timings (&s3_timing_regs, var, info->node);
if (rv < 0) {
- printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
+ fb_err(info, "invalid timings requested\n");
return rv;
}
rv = svga_compute_pll(&s3_pll, PICOS2KHZ(var->pixclock), &m, &n, &r,
info->node);
if (rv < 0) {
- printk(KERN_ERR "fb%d: invalid pixclock value requested\n",
- info->node);
+ fb_err(info, "invalid pixclock value requested\n");
return rv;
}
@@ -686,7 +685,7 @@ static int s3fb_set_par(struct fb_info *info)
/* Set the offset register */
- pr_debug("fb%d: offset register : %d\n", info->node, offset_value);
+ fb_dbg(info, "offset register : %d\n", offset_value);
svga_wcrt_multi(par->state.vgabase, s3_offset_regs, offset_value);
if (par->chip != CHIP_357_VIRGE_GX2 &&
@@ -769,7 +768,7 @@ static int s3fb_set_par(struct fb_info *info)
/* Set mode-specific register values */
switch (mode) {
case 0:
- pr_debug("fb%d: text mode\n", info->node);
+ fb_dbg(info, "text mode\n");
svga_set_textmode_vga_regs(par->state.vgabase);
/* Set additional registers like in 8-bit mode */
@@ -780,12 +779,12 @@ static int s3fb_set_par(struct fb_info *info)
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
if (fasttext) {
- pr_debug("fb%d: high speed text mode set\n", info->node);
+ fb_dbg(info, "high speed text mode set\n");
svga_wcrt_mask(par->state.vgabase, 0x31, 0x40, 0x40);
}
break;
case 1:
- pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
+ fb_dbg(info, "4 bit pseudocolor\n");
vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
/* Set additional registers like in 8-bit mode */
@@ -796,7 +795,7 @@ static int s3fb_set_par(struct fb_info *info)
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
break;
case 2:
- pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
+ fb_dbg(info, "4 bit pseudocolor, planar\n");
/* Set additional registers like in 8-bit mode */
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
@@ -806,7 +805,7 @@ static int s3fb_set_par(struct fb_info *info)
svga_wcrt_mask(par->state.vgabase, 0x3A, 0x00, 0x30);
break;
case 3:
- pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
+ fb_dbg(info, "8 bit pseudocolor\n");
svga_wcrt_mask(par->state.vgabase, 0x50, 0x00, 0x30);
if (info->var.pixclock > 20000 ||
par->chip = CHIP_357_VIRGE_GX2 ||
@@ -822,7 +821,7 @@ static int s3fb_set_par(struct fb_info *info)
}
break;
case 4:
- pr_debug("fb%d: 5/5/5 truecolor\n", info->node);
+ fb_dbg(info, "5/5/5 truecolor\n");
if (par->chip = CHIP_988_VIRGE_VX) {
if (info->var.pixclock > 20000)
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
@@ -850,7 +849,7 @@ static int s3fb_set_par(struct fb_info *info)
}
break;
case 5:
- pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
+ fb_dbg(info, "5/6/5 truecolor\n");
if (par->chip = CHIP_988_VIRGE_VX) {
if (info->var.pixclock > 20000)
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
@@ -879,16 +878,16 @@ static int s3fb_set_par(struct fb_info *info)
break;
case 6:
/* VIRGE VX case */
- pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
+ fb_dbg(info, "8/8/8 truecolor\n");
svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
break;
case 7:
- pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node);
+ fb_dbg(info, "8/8/8/8 truecolor\n");
svga_wcrt_mask(par->state.vgabase, 0x50, 0x30, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0xD0, 0xF0);
break;
default:
- printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node);
+ fb_err(info, "unsupported mode - bug\n");
return -EINVAL;
}
@@ -991,27 +990,27 @@ static int s3fb_blank(int blank_mode, struct fb_info *info)
switch (blank_mode) {
case FB_BLANK_UNBLANK:
- pr_debug("fb%d: unblank\n", info->node);
+ fb_dbg(info, "unblank\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
break;
case FB_BLANK_NORMAL:
- pr_debug("fb%d: blank\n", info->node);
+ fb_dbg(info, "blank\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x00, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_HSYNC_SUSPEND:
- pr_debug("fb%d: hsync\n", info->node);
+ fb_dbg(info, "hsync\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x02, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_VSYNC_SUSPEND:
- pr_debug("fb%d: vsync\n", info->node);
+ fb_dbg(info, "vsync\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x04, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_POWERDOWN:
- pr_debug("fb%d: sync down\n", info->node);
+ fb_dbg(info, "sync down\n");
svga_wcrt_mask(par->state.vgabase, 0x56, 0x06, 0x06);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
@@ -1359,13 +1358,16 @@ static int s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto err_reg_fb;
}
- printk(KERN_INFO "fb%d: %s on %s, %d MB RAM, %d MHz MCLK\n", info->node, info->fix.id,
- pci_name(dev), info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000);
+ fb_info(info, "%s on %s, %d MB RAM, %d MHz MCLK\n",
+ info->fix.id, pci_name(dev),
+ info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000);
if (par->chip = CHIP_UNKNOWN)
- printk(KERN_INFO "fb%d: unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n",
- info->node, vga_rcrt(par->state.vgabase, 0x2d), vga_rcrt(par->state.vgabase, 0x2e),
- vga_rcrt(par->state.vgabase, 0x2f), vga_rcrt(par->state.vgabase, 0x30));
+ fb_info(info, "unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n",
+ vga_rcrt(par->state.vgabase, 0x2d),
+ vga_rcrt(par->state.vgabase, 0x2e),
+ vga_rcrt(par->state.vgabase, 0x2f),
+ vga_rcrt(par->state.vgabase, 0x30));
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index a9ac3ce..bc74d04 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -803,8 +803,8 @@ static int sgivwfb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
- printk(KERN_INFO "fb%d: SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
- info->node, sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
+ fb_info(info, "SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",
+ sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
return 0;
fail_register_framebuffer:
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 977e279..e962879 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -6480,8 +6480,8 @@ error_3: vfree(ivideo->bios_abase);
"disabled");
- printk(KERN_INFO "fb%d: %s frame buffer device version %d.%d.%d\n",
- sis_fb_info->node, ivideo->myid, VER_MAJOR, VER_MINOR, VER_LEVEL);
+ fb_info(sis_fb_info, "%s frame buffer device version %d.%d.%d\n",
+ ivideo->myid, VER_MAJOR, VER_MINOR, VER_LEVEL);
printk(KERN_INFO "sisfb: Copyright (C) 2001-2005 Thomas Winischhofer\n");
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
index 2d4694c..fefde7c 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/skeletonfb.c
@@ -824,8 +824,7 @@ static int xxxfb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
- info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
pci_set_drvdata(dev, info); /* or platform_set_drvdata(pdev, info) */
return 0;
}
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 9c00026..f0cb279 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -706,10 +706,10 @@ static void sstfb_setvgapass( struct fb_info *info, int enable )
fbiinit0 = sst_read (FBIINIT0);
if (par->vgapass) {
sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
- printk(KERN_INFO "fb%d: Enabling VGA pass-through\n", info->node );
+ fb_info(info, "Enabling VGA pass-through\n");
} else {
sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
- printk(KERN_INFO "fb%d: Disabling VGA pass-through\n", info->node );
+ fb_info(info, "Disabling VGA pass-through\n");
}
pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
}
@@ -1437,8 +1437,8 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
- printk(KERN_INFO "fb%d: %s frame buffer device at 0x%p\n",
- info->node, fix->id, info->screen_base);
+ fb_info(info, "%s frame buffer device at 0x%p\n",
+ fix->id, info->screen_base);
return 0;
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 876648e..a943a7c 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -1283,9 +1283,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
sti->info = info; /* save for unregister_framebuffer() */
- printk(KERN_INFO
- "fb%d: %s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n",
- fb->info.node,
+ fb_info(&fb->info, "%s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n",
fix->id,
var->xres,
var->yres,
diff --git a/drivers/video/svgalib.c b/drivers/video/svgalib.c
index 33df9ec..9e01322 100644
--- a/drivers/video/svgalib.c
+++ b/drivers/video/svgalib.c
@@ -198,8 +198,8 @@ void svga_settile(struct fb_info *info, struct fb_tilemap *map)
if ((map->width != 8) || (map->height != 16) ||
(map->depth != 1) || (map->length != 256)) {
- printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n",
- info->node, map->width, map->height, map->depth, map->length);
+ fb_err(info, "unsupported font parameters: width %d, height %d, depth %d, length %d\n",
+ map->width, map->height, map->depth, map->length);
return;
}
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index c9c8e5a..f28674f 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -1671,8 +1671,8 @@ static int tgafb_register(struct device *dev)
if (tga_bus_tc)
pr_info("tgafb: SFB+ detected, rev=0x%02x\n",
par->tga_chip_rev);
- pr_info("fb%d: %s frame buffer device at 0x%lx\n",
- info->node, info->fix.id, (long)bar0_start);
+ fb_info(info, "%s frame buffer device at 0x%lx\n",
+ info->fix.id, (long)bar0_start);
return 0;
diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
index deb8733..1b5063b 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/tmiofb.c
@@ -781,8 +781,7 @@ static int tmiofb_probe(struct platform_device *dev)
if (retval < 0)
goto err_register_framebuffer;
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 7aec6f3..46a3c5b 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -1771,13 +1771,11 @@ static int uvesafb_probe(struct platform_device *dev)
"using %dk, total %dk\n", info->fix.smem_start,
info->screen_base, info->fix.smem_len/1024,
par->vbe_ib.total_memory * 64);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
- info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
err = sysfs_create_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
if (err != 0)
- printk(KERN_WARNING "fb%d: failed to register attributes\n",
- info->node);
+ fb_warn(info, "failed to register attributes\n");
return 0;
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index 3f5a041..e287ebc 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -392,7 +392,7 @@ int __init valkyriefb_init(void)
if ((err = register_framebuffer(&p->info)) != 0)
goto out_cmap_free;
- printk(KERN_INFO "fb%d: valkyrie frame buffer device\n", p->info.node);
+ fb_info(&p->info, "valkyrie frame buffer device\n");
return 0;
out_cmap_free:
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index bd83233..1c7da3b 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -489,8 +489,7 @@ static int vesafb_probe(struct platform_device *dev)
fb_dealloc_cmap(&info->cmap);
goto err;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
err:
if (info->screen_base)
diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c
index ee5985e..c25ff2e 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/vfb.c
@@ -527,9 +527,8 @@ static int vfb_probe(struct platform_device *dev)
goto err2;
platform_set_drvdata(dev, info);
- printk(KERN_INFO
- "fb%d: Virtual frame buffer device, using %ldK of video memory\n",
- info->node, videomemorysize >> 10);
+ fb_info(info, "Virtual frame buffer device, using %ldK of video memory\n",
+ videomemorysize >> 10);
return 0;
err2:
fb_dealloc_cmap(&info->cmap);
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 2827333..283d335 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1377,8 +1377,7 @@ static int vga16fb_probe(struct platform_device *dev)
goto err_check_var;
}
- printk(KERN_INFO "fb%d: %s frame buffer device\n",
- info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
platform_set_drvdata(dev, info);
return 0;
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index e9557fa..7e97c53 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -266,7 +266,7 @@ static void vt8623_set_pixclock(struct fb_info *info, u32 pixclock)
rv = svga_compute_pll(&vt8623_pll, 1000000000 / pixclock, &m, &n, &r, info->node);
if (rv < 0) {
- printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node);
+ fb_err(info, "cannot set requested pixclock, keeping old value\n");
return;
}
@@ -335,7 +335,7 @@ static int vt8623fb_check_var(struct fb_var_screeninfo *var, struct fb_info *inf
rv = svga_match_format (vt8623fb_formats, var, NULL);
if (rv < 0)
{
- printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node);
+ fb_err(info, "unsupported mode requested\n");
return rv;
}
@@ -354,21 +354,23 @@ static int vt8623fb_check_var(struct fb_var_screeninfo *var, struct fb_info *inf
mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual;
if (mem > info->screen_size)
{
- printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", info->node, mem >> 10, (unsigned int) (info->screen_size >> 10));
+ fb_err(info, "not enough framebuffer memory (%d kB requested, %d kB available)\n",
+ mem >> 10, (unsigned int) (info->screen_size >> 10));
return -EINVAL;
}
/* Text mode is limited to 256 kB of memory */
if ((var->bits_per_pixel = 0) && (mem > (256*1024)))
{
- printk(KERN_ERR "fb%d: text framebuffer size too large (%d kB requested, 256 kB possible)\n", info->node, mem >> 10);
+ fb_err(info, "text framebuffer size too large (%d kB requested, 256 kB possible)\n",
+ mem >> 10);
return -EINVAL;
}
rv = svga_check_timings (&vt8623_timing_regs, var, info->node);
if (rv < 0)
{
- printk(KERN_ERR "fb%d: invalid timings requested\n", info->node);
+ fb_err(info, "invalid timings requested\n");
return rv;
}
@@ -474,32 +476,32 @@ static int vt8623fb_set_par(struct fb_info *info)
mode = svga_match_format(vt8623fb_formats, &(info->var), &(info->fix));
switch (mode) {
case 0:
- pr_debug("fb%d: text mode\n", info->node);
+ fb_dbg(info, "text mode\n");
svga_set_textmode_vga_regs(par->state.vgabase);
svga_wseq_mask(par->state.vgabase, 0x15, 0x00, 0xFE);
svga_wcrt_mask(par->state.vgabase, 0x11, 0x60, 0x70);
break;
case 1:
- pr_debug("fb%d: 4 bit pseudocolor\n", info->node);
+ fb_dbg(info, "4 bit pseudocolor\n");
vga_wgfx(par->state.vgabase, VGA_GFX_MODE, 0x40);
svga_wseq_mask(par->state.vgabase, 0x15, 0x20, 0xFE);
svga_wcrt_mask(par->state.vgabase, 0x11, 0x00, 0x70);
break;
case 2:
- pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node);
+ fb_dbg(info, "4 bit pseudocolor, planar\n");
svga_wseq_mask(par->state.vgabase, 0x15, 0x00, 0xFE);
svga_wcrt_mask(par->state.vgabase, 0x11, 0x00, 0x70);
break;
case 3:
- pr_debug("fb%d: 8 bit pseudocolor\n", info->node);
+ fb_dbg(info, "8 bit pseudocolor\n");
svga_wseq_mask(par->state.vgabase, 0x15, 0x22, 0xFE);
break;
case 4:
- pr_debug("fb%d: 5/6/5 truecolor\n", info->node);
+ fb_dbg(info, "5/6/5 truecolor\n");
svga_wseq_mask(par->state.vgabase, 0x15, 0xB6, 0xFE);
break;
case 5:
- pr_debug("fb%d: 8/8/8 truecolor\n", info->node);
+ fb_dbg(info, "8/8/8 truecolor\n");
svga_wseq_mask(par->state.vgabase, 0x15, 0xAE, 0xFE);
break;
default:
@@ -584,27 +586,27 @@ static int vt8623fb_blank(int blank_mode, struct fb_info *info)
switch (blank_mode) {
case FB_BLANK_UNBLANK:
- pr_debug("fb%d: unblank\n", info->node);
+ fb_dbg(info, "unblank\n");
svga_wcrt_mask(par->state.vgabase, 0x36, 0x00, 0x30);
svga_wseq_mask(par->state.vgabase, 0x01, 0x00, 0x20);
break;
case FB_BLANK_NORMAL:
- pr_debug("fb%d: blank\n", info->node);
+ fb_dbg(info, "blank\n");
svga_wcrt_mask(par->state.vgabase, 0x36, 0x00, 0x30);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_HSYNC_SUSPEND:
- pr_debug("fb%d: DPMS standby (hsync off)\n", info->node);
+ fb_dbg(info, "DPMS standby (hsync off)\n");
svga_wcrt_mask(par->state.vgabase, 0x36, 0x10, 0x30);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_VSYNC_SUSPEND:
- pr_debug("fb%d: DPMS suspend (vsync off)\n", info->node);
+ fb_dbg(info, "DPMS suspend (vsync off)\n");
svga_wcrt_mask(par->state.vgabase, 0x36, 0x20, 0x30);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
case FB_BLANK_POWERDOWN:
- pr_debug("fb%d: DPMS off (no sync)\n", info->node);
+ fb_dbg(info, "DPMS off (no sync)\n");
svga_wcrt_mask(par->state.vgabase, 0x36, 0x30, 0x30);
svga_wseq_mask(par->state.vgabase, 0x01, 0x20, 0x20);
break;
@@ -769,12 +771,12 @@ static int vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
rc = register_framebuffer(info);
if (rc < 0) {
- dev_err(info->device, "cannot register framebugger\n");
+ dev_err(info->device, "cannot register framebuffer\n");
goto err_reg_fb;
}
- printk(KERN_INFO "fb%d: %s on %s, %d MB RAM\n", info->node, info->fix.id,
- pci_name(dev), info->fix.smem_len >> 20);
+ fb_info(info, "%s on %s, %d MB RAM\n",
+ info->fix.id, pci_name(dev), info->fix.smem_len >> 20);
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 7a299e95..adce4cb 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -761,10 +761,9 @@ int w100fb_probe(struct platform_device *pdev)
err |= device_create_file(&pdev->dev, &dev_attr_flip);
if (err != 0)
- printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n",
- info->node, err);
+ fb_warn(info, "failed to register attributes (%d)\n", err);
- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
+ fb_info(info, "%s frame buffer device\n", info->fix.id);
return 0;
out:
if (info) {
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 3072f30..fd447b8 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -372,14 +372,12 @@ static int wm8505fb_probe(struct platform_device *pdev)
}
ret = device_create_file(&pdev->dev, &dev_attr_contrast);
- if (ret < 0) {
- printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n",
- fbi->fb.node, ret);
- }
+ if (ret < 0)
+ fb_warn(&fbi->fb, "failed to register attributes (%d)\n", ret);
- printk(KERN_INFO "fb%d: %s frame buffer at 0x%lx-0x%lx\n",
- fbi->fb.node, fbi->fb.fix.id, fbi->fb.fix.smem_start,
- fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
+ fb_info(&fbi->fb, "%s frame buffer at 0x%lx-0x%lx\n",
+ fbi->fb.fix.id, fbi->fb.fix.smem_start,
+ fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
return 0;
}
--
1.8.1.2.459.gbcd45b4.dirty
^ permalink raw reply related
* [PATCH 1/2] framebuffer: arkfb: Fix framebugger typo
From: Joe Perches @ 2013-09-20 1:53 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-fbdev, linux-kernel
s/framebugger/framebuffer/
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/video/arkfb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index ee0f1a1..b13f3f2 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1048,7 +1048,7 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
rc = register_framebuffer(info);
if (rc < 0) {
- dev_err(info->device, "cannot register framebugger\n");
+ dev_err(info->device, "cannot register framebuffer\n");
goto err_reg_fb;
}
--
1.8.1.2.459.gbcd45b4.dirty
^ permalink raw reply related
* [PATCH 2/2] framebuffer: Remove pmag-aa-fb
From: Joe Perches @ 2013-09-20 1:53 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-fbdev, linux-kernel
In-Reply-To: <c94f3e342947923f20d4c12932f382aa5200511b.1379641901.git.joe@perches.com>
This driver apparently hasn't compiled since 2.5 days as
it uses a #define that isn't around anymore.
Remove it.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/video/Kconfig | 10 -
drivers/video/Makefile | 1 -
drivers/video/pmag-aa-fb.c | 510 ---------------------------------------------
3 files changed, 521 deletions(-)
delete mode 100644 drivers/video/pmag-aa-fb.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 14317b7..e92798e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1821,16 +1821,6 @@ config FB_HIT
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
-config FB_PMAG_AA
- bool "PMAG-AA TURBOchannel framebuffer support"
- depends on (FB = y) && TC
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
- used mainly in the MIPS-based DECstation series.
-
config FB_PMAG_BA
tristate "PMAG-BA TURBOchannel framebuffer support"
depends on FB && TC
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index e8bae8d..5c8b340 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -114,7 +114,6 @@ obj-$(CONFIG_FB_AU1100) += au1100fb.o
obj-$(CONFIG_FB_AU1200) += au1200fb.o
obj-$(CONFIG_FB_VT8500) += vt8500lcdfb.o
obj-$(CONFIG_FB_WM8505) += wm8505fb.o
-obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
diff --git a/drivers/video/pmag-aa-fb.c b/drivers/video/pmag-aa-fb.c
deleted file mode 100644
index 8384248..0000000
--- a/drivers/video/pmag-aa-fb.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * linux/drivers/video/pmag-aa-fb.c
- * Copyright 2002 Karsten Merker <merker@debian.org>
- *
- * PMAG-AA TurboChannel framebuffer card support ... derived from
- * pmag-ba-fb.c, which is Copyright (C) 1999, 2000, 2001 by
- * Michael Engel <engel@unix-ag.org>, Karsten Merker <merker@debian.org>
- * and Harald Koerfgen <hkoerfg@web.de>, which itself is derived from
- * "HP300 Topcat framebuffer support (derived from macfb of all things)
- * Phil Blundell <philb@gnu.org> 1998"
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * 2002-09-28 Karsten Merker <merker@linuxtag.org>
- * Version 0.01: First try to get a PMAG-AA running.
- *
- * 2003-02-24 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
- * Version 0.02: Major code cleanup.
- *
- * 2003-09-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
- * Hardware cursor support.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/fb.h>
-#include <linux/console.h>
-
-#include <asm/bootinfo.h>
-#include <asm/dec/machtype.h>
-#include <asm/dec/tc.h>
-
-#include <video/fbcon.h>
-#include <video/fbcon-cfb8.h>
-
-#include "bt455.h"
-#include "bt431.h"
-
-/* Version information */
-#define DRIVER_VERSION "0.02"
-#define DRIVER_AUTHOR "Karsten Merker <merker@linuxtag.org>"
-#define DRIVER_DESCRIPTION "PMAG-AA Framebuffer Driver"
-
-/* Prototypes */
-static int aafb_set_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info);
-
-/*
- * Bt455 RAM DAC register base offset (rel. to TC slot base address).
- */
-#define PMAG_AA_BT455_OFFSET 0x100000
-
-/*
- * Bt431 cursor generator offset (rel. to TC slot base address).
- */
-#define PMAG_AA_BT431_OFFSET 0x180000
-
-/*
- * Begin of PMAG-AA framebuffer memory relative to TC slot address,
- * resolution is 1280x1024x1 (8 bits deep, but only LSB is used).
- */
-#define PMAG_AA_ONBOARD_FBMEM_OFFSET 0x200000
-
-struct aafb_cursor {
- struct timer_list timer;
- int enable;
- int on;
- int vbl_cnt;
- int blink_rate;
- u16 x, y, width, height;
-};
-
-#define CURSOR_TIMER_FREQ (HZ / 50)
-#define CURSOR_BLINK_RATE (20)
-#define CURSOR_DRAW_DELAY (2)
-
-struct aafb_info {
- struct fb_info info;
- struct display disp;
- struct aafb_cursor cursor;
- struct bt455_regs *bt455;
- struct bt431_regs *bt431;
- unsigned long fb_start;
- unsigned long fb_size;
- unsigned long fb_line_length;
-};
-
-/*
- * Max 3 TURBOchannel slots -> max 3 PMAG-AA.
- */
-static struct aafb_info my_fb_info[3];
-
-static struct aafb_par {
-} current_par;
-
-static int currcon = -1;
-
-static void aafb_set_cursor(struct aafb_info *info, int on)
-{
- struct aafb_cursor *c = &info->cursor;
-
- if (on) {
- bt431_position_cursor(info->bt431, c->x, c->y);
- bt431_enable_cursor(info->bt431);
- } else
- bt431_erase_cursor(info->bt431);
-}
-
-static void aafbcon_cursor(struct display *disp, int mode, int x, int y)
-{
- struct aafb_info *info = (struct aafb_info *)disp->fb_info;
- struct aafb_cursor *c = &info->cursor;
-
- x *= fontwidth(disp);
- y *= fontheight(disp);
-
- if (c->x = x && c->y = y && (mode = CM_ERASE) = !c->enable)
- return;
-
- c->enable = 0;
- if (c->on)
- aafb_set_cursor(info, 0);
- c->x = x - disp->var.xoffset;
- c->y = y - disp->var.yoffset;
-
- switch (mode) {
- case CM_ERASE:
- c->on = 0;
- break;
- case CM_DRAW:
- case CM_MOVE:
- if (c->on)
- aafb_set_cursor(info, c->on);
- else
- c->vbl_cnt = CURSOR_DRAW_DELAY;
- c->enable = 1;
- break;
- }
-}
-
-static int aafbcon_set_font(struct display *disp, int width, int height)
-{
- struct aafb_info *info = (struct aafb_info *)disp->fb_info;
- struct aafb_cursor *c = &info->cursor;
- u8 fgc = ~attr_bgcol_ec(disp, disp->conp, &info->info);
-
- if (width > 64 || height > 64 || width < 0 || height < 0)
- return -EINVAL;
-
- c->height = height;
- c->width = width;
-
- bt431_set_font(info->bt431, fgc, width, height);
-
- return 1;
-}
-
-static void aafb_cursor_timer_handler(unsigned long data)
-{
- struct aafb_info *info = (struct aafb_info *)data;
- struct aafb_cursor *c = &info->cursor;
-
- if (!c->enable)
- goto out;
-
- if (c->vbl_cnt && --c->vbl_cnt = 0) {
- c->on ^= 1;
- aafb_set_cursor(info, c->on);
- c->vbl_cnt = c->blink_rate;
- }
-
-out:
- c->timer.expires = jiffies + CURSOR_TIMER_FREQ;
- add_timer(&c->timer);
-}
-
-static void __init aafb_cursor_init(struct aafb_info *info)
-{
- struct aafb_cursor *c = &info->cursor;
-
- c->enable = 1;
- c->on = 1;
- c->x = c->y = 0;
- c->width = c->height = 0;
- c->vbl_cnt = CURSOR_DRAW_DELAY;
- c->blink_rate = CURSOR_BLINK_RATE;
-
- init_timer(&c->timer);
- c->timer.data = (unsigned long)info;
- c->timer.function = aafb_cursor_timer_handler;
- mod_timer(&c->timer, jiffies + CURSOR_TIMER_FREQ);
-}
-
-static void __exit aafb_cursor_exit(struct aafb_info *info)
-{
- struct aafb_cursor *c = &info->cursor;
-
- del_timer_sync(&c->timer);
-}
-
-static struct display_switch aafb_switch8 = {
- .setup = fbcon_cfb8_setup,
- .bmove = fbcon_cfb8_bmove,
- .clear = fbcon_cfb8_clear,
- .putc = fbcon_cfb8_putc,
- .putcs = fbcon_cfb8_putcs,
- .revc = fbcon_cfb8_revc,
- .cursor = aafbcon_cursor,
- .set_font = aafbcon_set_font,
- .clear_margins = fbcon_cfb8_clear_margins,
- .fontwidthmask = FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
-};
-
-static void aafb_get_par(struct aafb_par *par)
-{
- *par = current_par;
-}
-
-static int aafb_get_fix(struct fb_fix_screeninfo *fix, int con,
- struct fb_info *info)
-{
- struct aafb_info *ip = (struct aafb_info *)info;
-
- memset(fix, 0, sizeof(struct fb_fix_screeninfo));
- strcpy(fix->id, "PMAG-AA");
- fix->smem_start = ip->fb_start;
- fix->smem_len = ip->fb_size;
- fix->type = FB_TYPE_PACKED_PIXELS;
- fix->ypanstep = 1;
- fix->ywrapstep = 1;
- fix->visual = FB_VISUAL_MONO10;
- fix->line_length = 1280;
- fix->accel = FB_ACCEL_NONE;
-
- return 0;
-}
-
-static void aafb_set_disp(struct display *disp, int con,
- struct aafb_info *info)
-{
- struct fb_fix_screeninfo fix;
-
- disp->fb_info = &info->info;
- aafb_set_var(&disp->var, con, &info->info);
- if (disp->conp && disp->conp->vc_sw && disp->conp->vc_sw->con_cursor)
- disp->conp->vc_sw->con_cursor(disp->conp, CM_ERASE);
- disp->dispsw = &aafb_switch8;
- disp->dispsw_data = 0;
-
- aafb_get_fix(&fix, con, &info->info);
- disp->screen_base = (u8 *) fix.smem_start;
- disp->visual = fix.visual;
- disp->type = fix.type;
- disp->type_aux = fix.type_aux;
- disp->ypanstep = fix.ypanstep;
- disp->ywrapstep = fix.ywrapstep;
- disp->line_length = fix.line_length;
- disp->next_line = 2048;
- disp->can_soft_blank = 1;
- disp->inverse = 0;
- disp->scrollmode = SCROLL_YREDRAW;
-
- aafbcon_set_font(disp, fontwidth(disp), fontheight(disp));
-}
-
-static int aafb_get_cmap(struct fb_cmap *cmap, int kspc, int con,
- struct fb_info *info)
-{
- static u16 color[2] = {0x0000, 0x000f};
- static struct fb_cmap aafb_cmap = {0, 2, color, color, color, NULL};
-
- fb_copy_cmap(&aafb_cmap, cmap, kspc ? 0 : 2);
- return 0;
-}
-
-static int aafb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
- struct fb_info *info)
-{
- u16 color[2] = {0x0000, 0x000f};
-
- if (cmap->start = 0
- && cmap->len = 2
- && memcmp(cmap->red, color, sizeof(color)) = 0
- && memcmp(cmap->green, color, sizeof(color)) = 0
- && memcmp(cmap->blue, color, sizeof(color)) = 0
- && cmap->transp = NULL)
- return 0;
- else
- return -EINVAL;
-}
-
-static int aafb_ioctl(struct fb_info *info, u32 cmd, unsigned long arg)
-{
- /* TODO: Not yet implemented */
- return -ENOIOCTLCMD;
-}
-
-static int aafb_switch(int con, struct fb_info *info)
-{
- struct aafb_info *ip = (struct aafb_info *)info;
- struct display *old = (currcon < 0) ? &ip->disp : (fb_display + currcon);
- struct display *new = (con < 0) ? &ip->disp : (fb_display + con);
-
- if (old->conp && old->conp->vc_sw && old->conp->vc_sw->con_cursor)
- old->conp->vc_sw->con_cursor(old->conp, CM_ERASE);
-
- /* Set the current console. */
- currcon = con;
- aafb_set_disp(new, con, ip);
-
- return 0;
-}
-
-static void aafb_encode_var(struct fb_var_screeninfo *var,
- struct aafb_par *par)
-{
- var->xres = 1280;
- var->yres = 1024;
- var->xres_virtual = 2048;
- var->yres_virtual = 1024;
- var->xoffset = 0;
- var->yoffset = 0;
- var->bits_per_pixel = 8;
- var->grayscale = 1;
- var->red.offset = 0;
- var->red.length = 0;
- var->red.msb_right = 0;
- var->green.offset = 0;
- var->green.length = 1;
- var->green.msb_right = 0;
- var->blue.offset = 0;
- var->blue.length = 0;
- var->blue.msb_right = 0;
- var->transp.offset = 0;
- var->transp.length = 0;
- var->transp.msb_right = 0;
- var->nonstd = 0;
- var->activate &= ~FB_ACTIVATE_MASK & FB_ACTIVATE_NOW;
- var->accel_flags = 0;
- var->sync = FB_SYNC_ON_GREEN;
- var->vmode &= ~FB_VMODE_MASK & FB_VMODE_NONINTERLACED;
-}
-
-static int aafb_get_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info)
-{
- if (con < 0) {
- struct aafb_par par;
-
- memset(var, 0, sizeof(struct fb_var_screeninfo));
- aafb_get_par(&par);
- aafb_encode_var(var, &par);
- } else
- *var = info->var;
-
- return 0;
-}
-
-static int aafb_set_var(struct fb_var_screeninfo *var, int con,
- struct fb_info *info)
-{
- struct aafb_par par;
-
- aafb_get_par(&par);
- aafb_encode_var(var, &par);
- info->var = *var;
-
- return 0;
-}
-
-static int aafb_update_var(int con, struct fb_info *info)
-{
- struct aafb_info *ip = (struct aafb_info *)info;
- struct display *disp = (con < 0) ? &ip->disp : (fb_display + con);
-
- if (con = currcon)
- aafbcon_cursor(disp, CM_ERASE, ip->cursor.x, ip->cursor.y);
-
- return 0;
-}
-
-/* 0 unblanks, any other blanks. */
-
-static void aafb_blank(int blank, struct fb_info *info)
-{
- struct aafb_info *ip = (struct aafb_info *)info;
- u8 val = blank ? 0x00 : 0x0f;
-
- bt455_write_cmap_entry(ip->bt455, 1, val, val, val);
- aafbcon_cursor(&ip->disp, CM_ERASE, ip->cursor.x, ip->cursor.y);
-}
-
-static struct fb_ops aafb_ops = {
- .owner = THIS_MODULE,
- .fb_get_fix = aafb_get_fix,
- .fb_get_var = aafb_get_var,
- .fb_set_var = aafb_set_var,
- .fb_get_cmap = aafb_get_cmap,
- .fb_set_cmap = aafb_set_cmap,
- .fb_ioctl = aafb_ioctl
-};
-
-static int __init init_one(int slot)
-{
- unsigned long base_addr = CKSEG1ADDR(get_tc_base_addr(slot));
- struct aafb_info *ip = &my_fb_info[slot];
-
- memset(ip, 0, sizeof(struct aafb_info));
-
- /*
- * Framebuffer display memory base address and friends.
- */
- ip->bt455 = (struct bt455_regs *) (base_addr + PMAG_AA_BT455_OFFSET);
- ip->bt431 = (struct bt431_regs *) (base_addr + PMAG_AA_BT431_OFFSET);
- ip->fb_start = base_addr + PMAG_AA_ONBOARD_FBMEM_OFFSET;
- ip->fb_size = 2048 * 1024; /* fb_fix_screeninfo.smem_length
- seems to be physical */
- ip->fb_line_length = 2048;
-
- /*
- * Let there be consoles..
- */
- strcpy(ip->info.modename, "PMAG-AA");
- ip->info.node = -1;
- ip->info.flags = FBINFO_FLAG_DEFAULT;
- ip->info.fbops = &aafb_ops;
- ip->info.disp = &ip->disp;
- ip->info.changevar = NULL;
- ip->info.switch_con = &aafb_switch;
- ip->info.updatevar = &aafb_update_var;
- ip->info.blank = &aafb_blank;
-
- aafb_set_disp(&ip->disp, currcon, ip);
-
- /*
- * Configure the RAM DACs.
- */
- bt455_erase_cursor(ip->bt455);
-
- /* Init colormap. */
- bt455_write_cmap_entry(ip->bt455, 0, 0x00, 0x00, 0x00);
- bt455_write_cmap_entry(ip->bt455, 1, 0x0f, 0x0f, 0x0f);
-
- /* Init hardware cursor. */
- bt431_init_cursor(ip->bt431);
- aafb_cursor_init(ip);
-
- /* Clear the screen. */
- memset ((void *)ip->fb_start, 0, ip->fb_size);
-
- if (register_framebuffer(&ip->info) < 0)
- return -EINVAL;
-
- printk(KERN_INFO "fb%d: %s frame buffer in TC slot %d\n",
- GET_FB_IDX(ip->info.node), ip->info.modename, slot);
-
- return 0;
-}
-
-static int __exit exit_one(int slot)
-{
- struct aafb_info *ip = &my_fb_info[slot];
-
- if (unregister_framebuffer(&ip->info) < 0)
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * Initialise the framebuffer.
- */
-int __init pmagaafb_init(void)
-{
- int sid;
- int found = 0;
-
- while ((sid = search_tc_card("PMAG-AA")) >= 0) {
- found = 1;
- claim_tc_card(sid);
- init_one(sid);
- }
-
- return found ? 0 : -ENXIO;
-}
-
-static void __exit pmagaafb_exit(void)
-{
- int sid;
-
- while ((sid = search_tc_card("PMAG-AA")) >= 0) {
- exit_one(sid);
- release_tc_card(sid);
- }
-}
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
-MODULE_LICENSE("GPL");
-#ifdef MODULE
-module_init(pmagaafb_init);
-module_exit(pmagaafb_exit);
-#endif
--
1.8.1.2.459.gbcd45b4.dirty
^ permalink raw reply related
* [PATCH 2/2] framebuffer: Fix int cast to pointer warnings
From: Joe Perches @ 2013-09-20 3:10 UTC (permalink / raw)
To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
Cc: linux-fbdev, linux-kernel
In-Reply-To: <c94f3e342947923f20d4c12932f382aa5200511b.1379641901.git.joe@perches.com>
Casts of int to pointer need additional casts to (unsigned long)
when compiled for x86-64 to silence the compiler.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/video/arkfb.c | 2 +-
drivers/video/vt8623fb.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index b13f3f2..26fd4e4 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1016,7 +1016,7 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
- par->state.vgabase = (void __iomem *) vga_res.start;
+ par->state.vgabase = (void __iomem *)(unsigned long)vga_res.start;
/* FIXME get memsize */
regval = vga_rseq(par->state.vgabase, 0x10);
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 7e97c53..281d41b 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -731,7 +731,7 @@ static int vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pcibios_bus_to_resource(dev, &vga_res, &bus_reg);
- par->state.vgabase = (void __iomem *) vga_res.start;
+ par->state.vgabase = (void __iomem *)(unsigned long)vga_res.start;
/* Find how many physical memory there is on card */
memsize1 = (vga_rseq(par->state.vgabase, 0x34) + 1) >> 1;
^ permalink raw reply related
* Re: [PATCH v11 0/8] PHY framework
From: Kishon Vijay Abraham I @ 2013-09-20 5:46 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130917154107.GH15645@radagast>
Hi Greg,
On Tuesday 17 September 2013 09:11 PM, Felipe Balbi wrote:
> On Wed, Sep 04, 2013 at 02:27:06PM +0530, Kishon Vijay Abraham I wrote:
>> On Tuesday 03 September 2013 09:20 PM, Greg KH wrote:
>>> On Tue, Sep 03, 2013 at 08:55:23PM +0530, Kishon Vijay Abraham I wrote:
>>>> Hi Greg,
>>>>
>>>> On Wednesday 28 August 2013 12:50 AM, Felipe Balbi wrote:
>>>>> Hi,
>>>>>
>>>>> On Mon, Aug 26, 2013 at 01:44:49PM +0530, Kishon Vijay Abraham I wrote:
>>>>>> On Wednesday 21 August 2013 11:16 AM, Kishon Vijay Abraham I wrote:
>>>>>>> Added a generic PHY framework that provides a set of APIs for the PHY drivers
>>>>>>> to create/destroy a PHY and APIs for the PHY users to obtain a reference to
>>>>>>> the PHY with or without using phandle.
>>>>>>>
>>>>>>> This framework will be of use only to devices that uses external PHY (PHY
>>>>>>> functionality is not embedded within the controller).
>>>>>>>
>>>>>>> The intention of creating this framework is to bring the phy drivers spread
>>>>>>> all over the Linux kernel to drivers/phy to increase code re-use and to
>>>>>>> increase code maintainability.
>>>>>>>
>>>>>>> Comments to make PHY as bus wasn't done because PHY devices can be part of
>>>>>>> other bus and making a same device attached to multiple bus leads to bad
>>>>>>> design.
>>>>>>>
>>>>>>> If the PHY driver has to send notification on connect/disconnect, the PHY
>>>>>>> driver should make use of the extcon framework. Using this susbsystem
>>>>>>> to use extcon framwork will have to be analysed.
>>>>>>>
>>>>>>> You can find this patch series @
>>>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git testing
>>>>>>
>>>>>> Looks like there are not further comments on this series. Can you take this in
>>>>>> your misc tree?
>>>>>
>>>>> Do you want me to queue these for you ? There are quite a few users for
>>>>> this framework already and I know of at least 2 others which will show
>>>>> up for v3.13.
>>>>
>>>> Can you queue this patch series? There are quite a few users already for this
>>>> framework.
>>>
>>> It will have to wait for 3.13 as the merge window for new features has
>>> been closed for a week or so. Sorry, I'll queue this up after 3.12-rc1
>>> is out.
>>
>> Alright, thanks.
>
> Just a gentle ping on this one...
Let me know if you want me to rebase this patch series on the latest mainline HEAD.
Thanks
Kishon
^ permalink raw reply
* Re: [PATCH v11 0/8] PHY framework
From: Greg KH @ 2013-09-20 6:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <523BDE70.4090407@ti.com>
On Fri, Sep 20, 2013 at 11:04:40AM +0530, Kishon Vijay Abraham I wrote:
> Hi Greg,
>
> On Tuesday 17 September 2013 09:11 PM, Felipe Balbi wrote:
> > On Wed, Sep 04, 2013 at 02:27:06PM +0530, Kishon Vijay Abraham I wrote:
> >> On Tuesday 03 September 2013 09:20 PM, Greg KH wrote:
> >>> On Tue, Sep 03, 2013 at 08:55:23PM +0530, Kishon Vijay Abraham I wrote:
> >>>> Hi Greg,
> >>>>
> >>>> On Wednesday 28 August 2013 12:50 AM, Felipe Balbi wrote:
> >>>>> Hi,
> >>>>>
> >>>>> On Mon, Aug 26, 2013 at 01:44:49PM +0530, Kishon Vijay Abraham I wrote:
> >>>>>> On Wednesday 21 August 2013 11:16 AM, Kishon Vijay Abraham I wrote:
> >>>>>>> Added a generic PHY framework that provides a set of APIs for the PHY drivers
> >>>>>>> to create/destroy a PHY and APIs for the PHY users to obtain a reference to
> >>>>>>> the PHY with or without using phandle.
> >>>>>>>
> >>>>>>> This framework will be of use only to devices that uses external PHY (PHY
> >>>>>>> functionality is not embedded within the controller).
> >>>>>>>
> >>>>>>> The intention of creating this framework is to bring the phy drivers spread
> >>>>>>> all over the Linux kernel to drivers/phy to increase code re-use and to
> >>>>>>> increase code maintainability.
> >>>>>>>
> >>>>>>> Comments to make PHY as bus wasn't done because PHY devices can be part of
> >>>>>>> other bus and making a same device attached to multiple bus leads to bad
> >>>>>>> design.
> >>>>>>>
> >>>>>>> If the PHY driver has to send notification on connect/disconnect, the PHY
> >>>>>>> driver should make use of the extcon framework. Using this susbsystem
> >>>>>>> to use extcon framwork will have to be analysed.
> >>>>>>>
> >>>>>>> You can find this patch series @
> >>>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git testing
> >>>>>>
> >>>>>> Looks like there are not further comments on this series. Can you take this in
> >>>>>> your misc tree?
> >>>>>
> >>>>> Do you want me to queue these for you ? There are quite a few users for
> >>>>> this framework already and I know of at least 2 others which will show
> >>>>> up for v3.13.
> >>>>
> >>>> Can you queue this patch series? There are quite a few users already for this
> >>>> framework.
> >>>
> >>> It will have to wait for 3.13 as the merge window for new features has
> >>> been closed for a week or so. Sorry, I'll queue this up after 3.12-rc1
> >>> is out.
> >>
> >> Alright, thanks.
> >
> > Just a gentle ping on this one...
>
> Let me know if you want me to rebase this patch series on the latest mainline HEAD.
Yes please.
^ permalink raw reply
* [PATCH 00/15] video: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Sachin Kamat (15):
video: atmel_lcdfb: Remove redundant dev_set_drvdata
video: grvga: Remove redundant dev_set_drvdata
video: leo: Remove redundant dev_set_drvdata
video: mb862xx: Remove redundant dev_set_drvdata
video: amifb: Remove redundant dev_set_drvdata
video: bw2: Remove redundant dev_set_drvdata
video: cg14: Remove redundant dev_set_drvdata
video: cg3: Remove redundant dev_set_drvdata
video: cg6: Remove redundant dev_set_drvdata
video: ffb: Remove redundant dev_set_drvdata
video: p9100: Remove redundant dev_set_drvdata
video: platinumfb: Remove redundant dev_set_drvdata
video: sunxvr1000: Remove redundant dev_set_drvdata
video: tcx: Remove redundant dev_set_drvdata
video: xilinxfb: Remove redundant dev_set_drvdata
drivers/video/amifb.c | 2 --
drivers/video/atmel_lcdfb.c | 2 --
drivers/video/bw2.c | 2 --
drivers/video/cg14.c | 2 --
drivers/video/cg3.c | 2 --
drivers/video/cg6.c | 2 --
drivers/video/ffb.c | 2 --
drivers/video/grvga.c | 2 --
drivers/video/leo.c | 2 --
drivers/video/mb862xx/mb862xxfbdrv.c | 2 --
drivers/video/p9100.c | 2 --
drivers/video/platinumfb.c | 1 -
drivers/video/sunxvr1000.c | 2 --
drivers/video/tcx.c | 2 --
drivers/video/xilinxfb.c | 2 --
15 files changed, 29 deletions(-)
--
1.7.9.5
^ permalink raw reply
* [PATCH 01/15] video: atmel_lcdfb: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/video/atmel_lcdfb.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 34e934d..70052e7 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -1318,7 +1318,6 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
return 0;
reset_drvdata:
- dev_set_drvdata(dev, NULL);
fb_dealloc_cmap(&info->cmap);
unregister_irqs:
cancel_work_sync(&sinfo->task);
@@ -1379,7 +1378,6 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
atmel_lcdfb_free_video_memory(sinfo);
}
- dev_set_drvdata(dev, NULL);
framebuffer_release(info);
return 0;
--
1.7.9.5
^ permalink raw reply related
* [PATCH 02/15] video: grvga: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
---
drivers/video/grvga.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/grvga.c b/drivers/video/grvga.c
index b95eee7..c078701 100644
--- a/drivers/video/grvga.c
+++ b/drivers/video/grvga.c
@@ -496,7 +496,6 @@ static int grvga_probe(struct platform_device *dev)
return 0;
free_mem:
- dev_set_drvdata(&dev->dev, NULL);
if (grvga_fix_addr)
iounmap((void *)virtual_start);
else
@@ -530,7 +529,6 @@ static int grvga_remove(struct platform_device *device)
kfree((void *)info->screen_base);
framebuffer_release(info);
- dev_set_drvdata(&device->dev, NULL);
}
return 0;
--
1.7.9.5
^ permalink raw reply related
* [PATCH 03/15] video: leo: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/leo.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index b17f500..c0f61aa 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -648,8 +648,6 @@ static int leo_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 04/15] video: mb862xx: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Anatolij Gustschin <agust@denx.de>
---
drivers/video/mb862xx/mb862xxfbdrv.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/mb862xx/mb862xxfbdrv.c
index 98d2f8c..0cd4c33 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/mb862xx/mb862xxfbdrv.c
@@ -781,7 +781,6 @@ rel_reg:
irqdisp:
irq_dispose_mapping(par->irq);
fbrel:
- dev_set_drvdata(dev, NULL);
framebuffer_release(info);
return ret;
}
@@ -814,7 +813,6 @@ static int of_platform_mb862xx_remove(struct platform_device *ofdev)
iounmap(par->mmio_base);
iounmap(par->fb_base);
- dev_set_drvdata(&ofdev->dev, NULL);
release_mem_region(par->res->start, res_size);
framebuffer_release(fbi);
return 0;
--
1.7.9.5
^ permalink raw reply related
* [PATCH 05/15] video: amifb: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/amifb.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index a6780ee..8ab304d 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -3748,7 +3748,6 @@ default_chipset:
return 0;
unset_drvdata:
- dev_set_drvdata(&pdev->dev, NULL);
fb_dealloc_cmap(&info->cmap);
free_irq:
free_irq(IRQ_AMIGA_COPPER, info->par);
@@ -3768,7 +3767,6 @@ static int __exit amifb_remove(struct platform_device *pdev)
struct fb_info *info = dev_get_drvdata(&pdev->dev);
unregister_framebuffer(info);
- dev_set_drvdata(&pdev->dev, NULL);
fb_dealloc_cmap(&info->cmap);
free_irq(IRQ_AMIGA_COPPER, info->par);
custom.dmacon = DMAF_ALL | DMAF_MASTER;
--
1.7.9.5
^ permalink raw reply related
* [PATCH 06/15] video: bw2: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/bw2.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 60017fc..bc123d6 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -363,8 +363,6 @@ static int bw2_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 07/15] video: cg14: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/cg14.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index ed3b889..9626488 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -583,8 +583,6 @@ static int cg14_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 08/15] video: cg3: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/cg3.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index 9f63507..64a89d5 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -446,8 +446,6 @@ static int cg3_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 09/15] video: cg6: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/cg6.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 3545dec..f070ec3 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -839,8 +839,6 @@ static int cg6_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 10/15] video: ffb: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/ffb.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
index 6d27447..4c4ffa6 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -1035,8 +1035,6 @@ static int ffb_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 11/15] video: p9100: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/p9100.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index 4b23af6..367cea8 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -339,8 +339,6 @@ static int p9100_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 12/15] video: platinumfb: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/platinumfb.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index 3d86bac..b644037 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -639,7 +639,6 @@ static int platinumfb_probe(struct platform_device* odev)
iounmap(pinfo->frame_buffer);
iounmap(pinfo->platinum_regs);
iounmap(pinfo->cmap_regs);
- dev_set_drvdata(&odev->dev, NULL);
framebuffer_release(info);
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 13/15] video: sunxvr1000: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/sunxvr1000.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/sunxvr1000.c
index cc6f48b..58241b4 100644
--- a/drivers/video/sunxvr1000.c
+++ b/drivers/video/sunxvr1000.c
@@ -186,8 +186,6 @@ static int gfb_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 14/15] video: tcx: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/tcx.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index c000852..1f3a327 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -498,8 +498,6 @@ static int tcx_remove(struct platform_device *op)
framebuffer_release(info);
- dev_set_drvdata(&op->dev, NULL);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 15/15] video: xilinxfb: Remove redundant dev_set_drvdata
From: Sachin Kamat @ 2013-09-20 6:44 UTC (permalink / raw)
To: linux-fbdev
Driver core sets driver data to NULL upon failure or remove.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
drivers/video/xilinxfb.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 84c664e..0e1dd33 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -369,7 +369,6 @@ err_fbmem:
err_region:
kfree(drvdata);
- dev_set_drvdata(dev, NULL);
return rc;
}
@@ -404,7 +403,6 @@ static int xilinxfb_release(struct device *dev)
#endif
kfree(drvdata);
- dev_set_drvdata(dev, NULL);
return 0;
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH 1/1] video: grvga: Use module_platform_driver
From: Sachin Kamat @ 2013-09-20 6:47 UTC (permalink / raw)
To: linux-fbdev
module_platform_driver removes some boilerplate code and makes
it simple.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kristoffer Glembo <kristoffer@gaisler.com>
---
drivers/video/grvga.c | 14 +-------------
1 file changed, 1 insertion(+), 13 deletions(-)
diff --git a/drivers/video/grvga.c b/drivers/video/grvga.c
index 01fbcaf..c078701 100644
--- a/drivers/video/grvga.c
+++ b/drivers/video/grvga.c
@@ -555,19 +555,7 @@ static struct platform_driver grvga_driver = {
.remove = grvga_remove,
};
-
-static int __init grvga_init(void)
-{
- return platform_driver_register(&grvga_driver);
-}
-
-static void __exit grvga_exit(void)
-{
- platform_driver_unregister(&grvga_driver);
-}
-
-module_init(grvga_init);
-module_exit(grvga_exit);
+module_platform_driver(grvga_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Aeroflex Gaisler");
--
1.7.9.5
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox