* [PATCHv2 01/27] ARM: OMAP: remove DSS DT hack
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
As a temporary solution to enable DSS for selected boards when booting
with DT, a hack was added to board-generic.c in
63d5fc0c2f748e20f38a0a0ec1c8494bddf5c288 (OMAP: board-generic: enable
DSS for panda & sdp boards).
We're now adding proper DT support, so the hack can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/dss-common.c | 259 -------------------------------------
arch/arm/mach-omap2/dss-common.h | 13 --
arch/arm/mach-omap2/pdata-quirks.c | 4 -
4 files changed, 1 insertion(+), 277 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dss-common.c
delete mode 100644 arch/arm/mach-omap2/dss-common.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index adcef406ff0a..e81dbf202a6d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -296,4 +296,4 @@ endif
emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
obj-y += $(emac-m) $(emac-y)
-obj-y += common-board-devices.o twl-common.o dss-common.o
+obj-y += common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
deleted file mode 100644
index dadccc91488c..000000000000
--- a/arch/arm/mach-omap2/dss-common.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments, Inc..
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "dss-common.h"
-#include "mux.h"
-
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD 63 /* Hotplug detect */
-
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 2,
-};
-
-static struct platform_device omap4_panda_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap4_panda_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap4_panda_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap4_panda_tfp410_pdata,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
- .name = "hdmi",
- .source = "tpd12s015.0",
-};
-
-static struct platform_device omap4_panda_hdmi_connector_device = {
- .name = "connector-hdmi",
- .id = 0,
- .dev.platform_data = &omap4_panda_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
- .name = "tpd12s015.0",
- .source = "hdmi.0",
-
- .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
- .ls_oe_gpio = HDMI_GPIO_LS_OE,
- .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device omap4_panda_tpd_device = {
- .name = "tpd12s015",
- .id = 0,
- .dev.platform_data = &omap4_panda_tpd_pdata,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
- .default_display_name = "dvi",
-};
-
-void __init omap4_panda_display_init_of(void)
-{
- omap_display_init(&omap4_panda_dss_data);
-
- platform_device_register(&omap4_panda_tfp410_device);
- platform_device_register(&omap4_panda_dvi_connector_device);
-
- platform_device_register(&omap4_panda_tpd_device);
- platform_device_register(&omap4_panda_hdmi_connector_device);
-}
-
-
-/* OMAP4 Blaze display data */
-
-#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO 40
-
-static struct panel_dsicm_platform_data dsi1_panel = {
- .name = "lcd",
- .source = "dsi.0",
- .reset_gpio = 102,
- .use_ext_te = false,
- .ext_te_gpio = 101,
- .pin_config = {
- .num_pins = 6,
- .pins = { 0, 1, 2, 3, 4, 5 },
- },
-};
-
-static struct platform_device sdp4430_lcd_device = {
- .name = "panel-dsi-cm",
- .id = 0,
- .dev.platform_data = &dsi1_panel,
-};
-
-static struct panel_dsicm_platform_data dsi2_panel = {
- .name = "lcd2",
- .source = "dsi.1",
- .reset_gpio = 104,
- .use_ext_te = false,
- .ext_te_gpio = 103,
- .pin_config = {
- .num_pins = 6,
- .pins = { 0, 1, 2, 3, 4, 5 },
- },
-};
-
-static struct platform_device sdp4430_lcd2_device = {
- .name = "panel-dsi-cm",
- .id = 1,
- .dev.platform_data = &dsi2_panel,
-};
-
-/* HDMI Connector */
-static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
- .name = "hdmi",
- .source = "tpd12s015.0",
-};
-
-static struct platform_device sdp4430_hdmi_connector_device = {
- .name = "connector-hdmi",
- .id = 0,
- .dev.platform_data = &sdp4430_hdmi_connector_pdata,
-};
-
-/* TPD12S015 HDMI ESD protection & level shifter chip */
-static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
- .name = "tpd12s015.0",
- .source = "hdmi.0",
-
- .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
- .ls_oe_gpio = HDMI_GPIO_LS_OE,
- .hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct platform_device sdp4430_tpd_device = {
- .name = "tpd12s015",
- .id = 0,
- .dev.platform_data = &sdp4430_tpd_pdata,
-};
-
-
-static struct omap_dss_board_info sdp4430_dss_data = {
- .default_display_name = "lcd",
-};
-
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
-void __init omap_4430sdp_display_init_of(void)
-{
- int r;
-
- r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
- "display_sel");
- if (r)
- pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
- r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
- "DLP POWER ON");
- if (r)
- pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
- omap_display_init(&sdp4430_dss_data);
-
- platform_device_register(&sdp4430_lcd_device);
- platform_device_register(&sdp4430_lcd2_device);
-
- platform_device_register(&sdp4430_tpd_device);
- platform_device_register(&sdp4430_hdmi_connector_device);
-}
-
-
-/* OMAP3 IGEPv2 data */
-
-#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO 170
-
-/* DVI Connector */
-static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 2,
-};
-
-static struct platform_device omap3_igep2_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap3_igep2_dvi_connector_pdata,
-};
-
-/* TFP410 DPI-to-DVI chip */
-static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct platform_device omap3_igep2_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap3_igep2_tfp410_pdata,
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
- .default_display_name = "dvi",
-};
-
-void __init omap3_igep2_display_init_of(void)
-{
- omap_display_init(&igep2_dss_data);
-
- platform_device_register(&omap3_igep2_tfp410_device);
- platform_device_register(&omap3_igep2_dvi_connector_device);
-}
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
deleted file mode 100644
index a9becf0d5be8..000000000000
--- a/arch/arm/mach-omap2/dss-common.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __OMAP_DSS_COMMON__
-#define __OMAP_DSS_COMMON__
-
-/*
- * NOTE: this is a transitional file to help with DT adaptation.
- * This file will be removed when DSS supports DT.
- */
-
-void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init_of(void);
-void __init omap3_igep2_display_init_of(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 39f020c982e8..acc72a002316 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -18,7 +18,6 @@
#include "common.h"
#include "common-board-devices.h"
-#include "dss-common.h"
#include "control.h"
struct pdata_init {
@@ -80,7 +79,6 @@ static void __init hsmmc2_internal_input_clk(void)
static void __init omap3_igep0020_legacy_init(void)
{
- omap3_igep2_display_init_of();
}
static void __init omap3_evm_legacy_init(void)
@@ -97,14 +95,12 @@ static void __init omap3_zoom_legacy_init(void)
#ifdef CONFIG_ARCH_OMAP4
static void __init omap4_sdp_legacy_init(void)
{
- omap_4430sdp_display_init_of();
legacy_init_wl12xx(WL12XX_REFCLOCK_26,
WL12XX_TCXOCLOCK_26, 53);
}
static void __init omap4_panda_legacy_init(void)
{
- omap4_panda_display_init_of();
legacy_init_ehci_clk("auxclk3_ck");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 02/27] OMAPDSS: remove DT hacks for regulators
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
For booting Panda and 4430SDP with DT, while DSS did not support DT, we
had to had small hacks in the omapdss driver to get the regulators. With
DT now supported in DSS, we can remove those hacks.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dsi.c | 5 -----
drivers/video/omap2/dss/hdmi4.c | 4 ----
2 files changed, 9 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 1cd3e47fd43f..18b5e84165bb 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1124,11 +1124,6 @@ static int dsi_regulator_init(struct platform_device *dsidev)
return 0;
vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "vdds_dsi");
-
- /* DT HACK: try VCXIO to make omapdss work for o4 sdp/panda */
- if (IS_ERR(vdds_dsi))
- vdds_dsi = devm_regulator_get(&dsi->pdev->dev, "VCXIO");
-
if (IS_ERR(vdds_dsi)) {
DSSERR("can't get VDDS_DSI regulator\n");
return PTR_ERR(vdds_dsi);
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/omap2/dss/hdmi4.c
index e14009614338..16e598787522 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/omap2/dss/hdmi4.c
@@ -90,10 +90,6 @@ static int hdmi_init_regulator(void)
reg = devm_regulator_get(&hdmi.pdev->dev, "vdda_hdmi_dac");
- /* DT HACK: try VDAC to make omapdss work for o4 sdp/panda */
- if (IS_ERR(reg))
- reg = devm_regulator_get(&hdmi.pdev->dev, "VDAC");
-
if (IS_ERR(reg)) {
DSSERR("can't get VDDA_HDMI_DAC regulator\n");
return PTR_ERR(reg);
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 03/27] ARM: OMAP2+: add omapdss_init_of()
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
omapdss driver uses a omapdss platform device to pass platform specific
function pointers and DSS hardware version from the arch code to the
driver. This device is needed also when booting with DT.
This patch adds omapdss_init_of() function, called from board-generic at
init time, which creates the omapdss device.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/mach-omap2/board-generic.c | 2 ++
arch/arm/mach-omap2/common.h | 2 ++
arch/arm/mach-omap2/display.c | 62 +++++++++++++++++++++++++++++++++++++
3 files changed, 66 insertions(+)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 8d972ff18c56..842e4f21ab09 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -36,6 +36,8 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
static void __init omap_generic_init(void)
{
pdata_quirks_init(omap_dt_match_table);
+
+ omapdss_init_of();
}
#ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index e30ef6797c63..04a4d360dd20 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -307,5 +307,7 @@ extern int omap_dss_reset(struct omap_hwmod *);
/* SoC specific clock initializer */
extern int (*omap_clk_init)(void);
+int __init omapdss_init_of(void);
+
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 58347bb874a0..197f431ae279 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -23,6 +23,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <video/omapdss.h>
#include "omap_hwmod.h"
@@ -514,3 +516,63 @@ int omap_dss_reset(struct omap_hwmod *oh)
return r;
}
+
+int __init omapdss_init_of(void)
+{
+ int r;
+ enum omapdss_version ver;
+
+ static struct omap_dss_board_info board_data = {
+ .dsi_enable_pads = omap_dsi_enable_pads,
+ .dsi_disable_pads = omap_dsi_disable_pads,
+ .get_context_loss_count = omap_pm_get_dev_context_loss_count,
+ .set_min_bus_tput = omap_dss_set_min_bus_tput,
+ };
+
+ ver = omap_display_get_version();
+
+ if (ver = OMAPDSS_VER_UNKNOWN) {
+ pr_err("DSS not supported on this SoC\n");
+ return -ENODEV;
+ }
+
+ board_data.version = ver;
+
+ omap_display_device.dev.platform_data = &board_data;
+
+ r = platform_device_register(&omap_display_device);
+ if (r < 0) {
+ pr_err("Unable to register omapdss device\n");
+ return r;
+ }
+
+ /* create DRM device */
+ r = omap_init_drm();
+ if (r < 0) {
+ pr_err("Unable to register omapdrm device\n");
+ return r;
+ }
+
+ /* create vrfb device */
+ r = omap_init_vrfb();
+ if (r < 0) {
+ pr_err("Unable to register omapvrfb device\n");
+ return r;
+ }
+
+ /* create FB device */
+ r = omap_init_fb();
+ if (r < 0) {
+ pr_err("Unable to register omapfb device\n");
+ return r;
+ }
+
+ /* create V4L2 display device */
+ r = omap_init_vout();
+ if (r < 0) {
+ pr_err("Unable to register omap_vout device\n");
+ return r;
+ }
+
+ return 0;
+}
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 04/27] OMAPDSS: add 'label' support for DT
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Add support to get the label (i.e. a "nickname") for a display from the
DT data. If there is no label defined, use the display's alias (e.g.
'display0') as a name.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/display.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 669a81fdf58e..012ada38a29d 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <video/omapdss.h>
#include "dss.h"
@@ -137,6 +138,14 @@ int omapdss_register_display(struct omap_dss_device *dssdev)
snprintf(dssdev->alias, sizeof(dssdev->alias),
"display%d", disp_num_counter++);
+ /* Use 'label' property for name, if it exists */
+ if (dssdev->dev->of_node)
+ of_property_read_string(dssdev->dev->of_node, "label",
+ &dssdev->name);
+
+ if (dssdev->name = NULL)
+ dssdev->name = dssdev->alias;
+
if (drv && drv->get_resolution = NULL)
drv->get_resolution = omapdss_default_get_resolution;
if (drv && drv->get_recommended_bpp = NULL)
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 05/27] OMAPDSS: get dssdev->alias from DT alias
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
We currently create a "displayX" style alias name for all displays,
using a number that is incremented for each registered display. With the
new DSS device model there is no clear order in which the displays are
registered, and thus the numbering is somewhat random.
This patch improves the behavior for DT case so that if the displays
have been assigned DT aliases, those aliases will be used as DSS
aliases.
This means that "display0" is always the one specified in the DT alias,
and thus display0 can be used as default display in case the user didn't
specify a default display.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/display.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 012ada38a29d..21080f9dae87 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -134,9 +134,24 @@ static int disp_num_counter;
int omapdss_register_display(struct omap_dss_device *dssdev)
{
struct omap_dss_driver *drv = dssdev->driver;
+ int id;
- snprintf(dssdev->alias, sizeof(dssdev->alias),
- "display%d", disp_num_counter++);
+ /*
+ * Note: this presumes all the displays are either using DT or non-DT,
+ * which normally should be the case. This also presumes that all
+ * displays either have an DT alias, or none has.
+ */
+
+ if (dssdev->dev->of_node) {
+ id = of_alias_get_id(dssdev->dev->of_node, "display");
+
+ if (id < 0)
+ id = disp_num_counter++;
+ } else {
+ id = disp_num_counter++;
+ }
+
+ snprintf(dssdev->alias, sizeof(dssdev->alias), "display%d", id);
/* Use 'label' property for name, if it exists */
if (dssdev->dev->of_node)
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 06/27] OMAPFB: clean up default display search
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Separate the code for finding the default display into a function for
clarity and to make it easier to extend it in the future.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/omapfb/omapfb-main.c | 46 ++++++++++++++++++++------------
1 file changed, 29 insertions(+), 17 deletions(-)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 27d6905683f3..8bfe973e55ec 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2407,6 +2407,34 @@ static int omapfb_init_connections(struct omapfb2_device *fbdev,
return 0;
}
+static struct omap_dss_device *
+omapfb_find_default_display(struct omapfb2_device *fbdev)
+{
+ const char *def_name;
+ int i;
+
+ /* search with the display name from the user or the board file */
+
+ def_name = omapdss_get_default_display_name();
+
+ if (def_name) {
+ for (i = 0; i < fbdev->num_displays; ++i) {
+ struct omap_dss_device *dssdev;
+
+ dssdev = fbdev->displays[i].dssdev;
+
+ if (dssdev->name && strcmp(def_name, dssdev->name) = 0)
+ return dssdev;
+ }
+
+ /* def_name given but not found */
+ return NULL;
+ }
+
+ /* return the first display we have in the list */
+ return fbdev->displays[0].dssdev;
+}
+
static int omapfb_probe(struct platform_device *pdev)
{
struct omapfb2_device *fbdev = NULL;
@@ -2484,23 +2512,7 @@ static int omapfb_probe(struct platform_device *pdev)
for (i = 0; i < fbdev->num_managers; i++)
fbdev->managers[i] = omap_dss_get_overlay_manager(i);
- def_display = NULL;
-
- for (i = 0; i < fbdev->num_displays; ++i) {
- struct omap_dss_device *dssdev;
- const char *def_name;
-
- def_name = omapdss_get_default_display_name();
-
- dssdev = fbdev->displays[i].dssdev;
-
- if (def_name = NULL ||
- (dssdev->name && strcmp(def_name, dssdev->name) = 0)) {
- def_display = dssdev;
- break;
- }
- }
-
+ def_display = omapfb_find_default_display(fbdev);
if (def_display = NULL) {
dev_err(fbdev->dev, "failed to find default display\n");
r = -EPROBE_DEFER;
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 07/27] OMAPFB: search for default display with DT alias
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Improve the search for the default display in two ways:
* compare the given display name to the display's alias
* if no display name is given, look for "display0" DT alias
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/omapfb/omapfb-main.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 8bfe973e55ec..961c5c251f63 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2413,7 +2413,10 @@ omapfb_find_default_display(struct omapfb2_device *fbdev)
const char *def_name;
int i;
- /* search with the display name from the user or the board file */
+ /*
+ * Search with the display name from the user or the board file,
+ * comparing to display names and aliases
+ */
def_name = omapdss_get_default_display_name();
@@ -2425,12 +2428,30 @@ omapfb_find_default_display(struct omapfb2_device *fbdev)
if (dssdev->name && strcmp(def_name, dssdev->name) = 0)
return dssdev;
+
+ if (strcmp(def_name, dssdev->alias) = 0)
+ return dssdev;
}
/* def_name given but not found */
return NULL;
}
+ /* then look for DT alias display0 */
+ for (i = 0; i < fbdev->num_displays; ++i) {
+ struct omap_dss_device *dssdev;
+ int id;
+
+ dssdev = fbdev->displays[i].dssdev;
+
+ if (dssdev->dev->of_node = NULL)
+ continue;
+
+ id = of_alias_get_id(dssdev->dev->of_node, "display");
+ if (id = 0)
+ return dssdev;
+ }
+
/* return the first display we have in the list */
return fbdev->displays[0].dssdev;
}
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 08/27] OMAPDSS: add of helpers
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Add helpers to get ports and endpoints from DT data.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/dss-of.c | 162 +++++++++++++++++++++++++++++++++++++++
include/video/omapdss.h | 14 ++++
3 files changed, 177 insertions(+), 1 deletion(-)
create mode 100644 drivers/video/omap2/dss/dss-of.c
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index d3aa91bdd6a8..8aec8bda27cc 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,7 +1,7 @@
obj-$(CONFIG_OMAP2_DSS) += omapdss.o
# Core DSS files
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
- output.o
+ output.o dss-of.o
# DSS compat layer files
omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
dispc-compat.o display-sysfs.o
diff --git a/drivers/video/omap2/dss/dss-of.c b/drivers/video/omap2/dss/dss-of.c
new file mode 100644
index 000000000000..59213cf2ffa2
--- /dev/null
+++ b/drivers/video/omap2/dss/dss-of.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/seq_file.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+struct device_node *
+omapdss_of_get_next_port(const struct device_node *parent,
+ struct device_node *prev)
+{
+ struct device_node *port = NULL;
+
+ if (!parent)
+ return NULL;
+
+ if (!prev) {
+ struct device_node *ports;
+ /*
+ * It's the first call, we have to find a port subnode
+ * within this node or within an optional 'ports' node.
+ */
+ ports = of_get_child_by_name(parent, "ports");
+ if (ports)
+ parent = ports;
+
+ port = of_get_child_by_name(parent, "port");
+
+ /* release the 'ports' node */
+ of_node_put(ports);
+ } else {
+ struct device_node *ports;
+
+ ports = of_get_parent(prev);
+ if (!ports)
+ return NULL;
+
+ do {
+ port = of_get_next_child(ports, prev);
+ if (!port) {
+ of_node_put(ports);
+ return NULL;
+ }
+ prev = port;
+ } while (of_node_cmp(port->name, "port") != 0);
+ }
+
+ return port;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_next_port);
+
+struct device_node *
+omapdss_of_get_next_endpoint(const struct device_node *parent,
+ struct device_node *prev)
+{
+ struct device_node *ep = NULL;
+
+ if (!parent)
+ return NULL;
+
+ do {
+ ep = of_get_next_child(parent, prev);
+ if (!ep)
+ return NULL;
+ prev = ep;
+ } while (of_node_cmp(ep->name, "endpoint") != 0);
+
+ return ep;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_next_endpoint);
+
+static struct device_node *
+omapdss_of_get_remote_device_node(const struct device_node *node)
+{
+ struct device_node *np;
+ int i;
+
+ np = of_parse_phandle(node, "remote-endpoint", 0);
+
+ if (!np)
+ return NULL;
+
+ np = of_get_next_parent(np);
+
+ for (i = 0; i < 3 && np; ++i) {
+ struct property *prop;
+
+ prop = of_find_property(np, "compatible", NULL);
+
+ if (prop)
+ return np;
+
+ np = of_get_next_parent(np);
+ }
+
+ return NULL;
+}
+
+struct device_node *
+omapdss_of_get_first_endpoint(const struct device_node *parent)
+{
+ struct device_node *port;
+ struct device_node *ep;
+
+ port = omapdss_of_get_next_port(parent, NULL);
+ if (port) {
+ ep = omapdss_of_get_next_endpoint(port, NULL);
+ of_node_put(port);
+ } else {
+ ep = omapdss_of_get_next_endpoint(parent, NULL);
+ }
+
+ return ep;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_get_first_endpoint);
+
+struct omap_dss_device *
+omapdss_of_find_source_for_first_ep(struct device_node *node)
+{
+ struct device_node *ep;
+ struct device_node *src_node;
+ struct omap_dss_device *src;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return ERR_PTR(-EINVAL);
+
+ src_node = omapdss_of_get_remote_device_node(ep);
+
+ of_node_put(ep);
+
+ if (!src_node)
+ return ERR_PTR(-EINVAL);
+
+ src = omap_dss_find_output_by_node(src_node);
+
+ of_node_put(src_node);
+
+ if (!src)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return src;
+}
+EXPORT_SYMBOL_GPL(omapdss_of_find_source_for_first_ep);
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3d7c51a6f9ff..e3cd2a921c2f 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -1019,4 +1019,18 @@ static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)
return dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
}
+struct device_node *
+omapdss_of_get_next_port(const struct device_node *parent,
+ struct device_node *prev);
+
+struct device_node *
+omapdss_of_get_next_endpoint(const struct device_node *parent,
+ struct device_node *prev);
+
+struct device_node *
+omapdss_of_get_first_endpoint(const struct device_node *parent);
+
+struct omap_dss_device *
+omapdss_of_find_source_for_first_ep(struct device_node *node);
+
#endif
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 09/27] OMAPDSS: Add DT support to DSS, DISPC, DPI and SDI.
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 7 +++++
drivers/video/omap2/dss/dpi.c | 47 ++++++++++++++++++++++++++++++
drivers/video/omap2/dss/dss.c | 63 +++++++++++++++++++++++++++++++++++++++++
drivers/video/omap2/dss/dss.h | 6 ++++
drivers/video/omap2/dss/sdi.c | 45 +++++++++++++++++++++++++++++
5 files changed, 168 insertions(+)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 4ec59ca72e5d..b702369fc895 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3744,12 +3744,19 @@ static const struct dev_pm_ops dispc_pm_ops = {
.runtime_resume = dispc_runtime_resume,
};
+static const struct of_device_id dispc_of_match[] = {
+ { .compatible = "ti,omap3-dispc", },
+ { .compatible = "ti,omap4-dispc", },
+ {},
+};
+
static struct platform_driver omap_dispchw_driver = {
.remove = __exit_p(omap_dispchw_remove),
.driver = {
.name = "omapdss_dispc",
.owner = THIS_MODULE,
.pm = &dispc_pm_ops,
+ .of_match_table = dispc_of_match,
},
};
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index bd48cde53561..cc452796b734 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/string.h>
+#include <linux/of.h>
#include <video/omapdss.h>
@@ -49,6 +50,8 @@ static struct {
int data_lines;
struct omap_dss_device output;
+
+ bool port_initialized;
} dpi;
static struct platform_device *dpi_get_dsidev(enum omap_channel channel)
@@ -726,3 +729,47 @@ void __exit dpi_uninit_platform_driver(void)
{
platform_driver_unregister(&omap_dpi_driver);
}
+
+int __init dpi_init_port(struct platform_device *pdev, struct device_node *port)
+{
+ struct device_node *ep;
+ u32 datalines;
+ int r;
+
+ ep = omapdss_of_get_next_endpoint(port, NULL);
+ if (!ep)
+ return 0;
+
+ r = of_property_read_u32(ep, "data-lines", &datalines);
+ if (r) {
+ DSSERR("failed to parse datalines\n");
+ goto err_datalines;
+ }
+
+ dpi.data_lines = datalines;
+
+ of_node_put(ep);
+
+ dpi.pdev = pdev;
+
+ mutex_init(&dpi.lock);
+
+ dpi_init_output(pdev);
+
+ dpi.port_initialized = true;
+
+ return 0;
+
+err_datalines:
+ of_node_put(ep);
+
+ return r;
+}
+
+void __exit dpi_uninit_port(void)
+{
+ if (!dpi.port_initialized)
+ return;
+
+ dpi_uninit_output(dpi.pdev);
+}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index bd01608e67e2..1082fadd004f 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -23,6 +23,7 @@
#define DSS_SUBSYS_NAME "DSS"
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/err.h>
@@ -33,6 +34,7 @@
#include <linux/pm_runtime.h>
#include <linux/gfp.h>
#include <linux/sizes.h>
+#include <linux/of.h>
#include <video/omapdss.h>
@@ -841,6 +843,54 @@ static int __init dss_init_features(struct platform_device *pdev)
return 0;
}
+static int dss_init_ports(struct platform_device *pdev)
+{
+ struct device_node *parent = pdev->dev.of_node;
+ struct device_node *port;
+ int r;
+
+ port = omapdss_of_get_next_port(parent, NULL);
+ if (!port) {
+
+#ifdef CONFIG_OMAP2_DSS_DPI
+ dpi_init_port(pdev, parent);
+#endif
+ return 0;
+ }
+
+ do {
+ u32 reg;
+
+ r = of_property_read_u32(port, "reg", ®);
+ if (r)
+ reg = 0;
+
+#ifdef CONFIG_OMAP2_DSS_DPI
+ if (reg = 0)
+ dpi_init_port(pdev, port);
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+ if (reg = 1)
+ sdi_init_port(pdev, port);
+#endif
+
+ } while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+
+ return 0;
+}
+
+static void dss_uninit_ports(void)
+{
+#ifdef CONFIG_OMAP2_DSS_DPI
+ dpi_uninit_port();
+#endif
+
+#ifdef CONFIG_OMAP2_DSS_SDI
+ sdi_uninit_port();
+#endif
+}
+
/* DSS HW IP initialisation */
static int __init omap_dsshw_probe(struct platform_device *pdev)
{
@@ -899,6 +949,8 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
+ dss_init_ports(pdev);
+
rev = dss_read_reg(DSS_REVISION);
printk(KERN_INFO "OMAP DSS rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -918,6 +970,8 @@ err_setup_clocks:
static int __exit omap_dsshw_remove(struct platform_device *pdev)
{
+ dss_uninit_ports();
+
pm_runtime_disable(&pdev->dev);
dss_put_clocks();
@@ -955,12 +1009,21 @@ static const struct dev_pm_ops dss_pm_ops = {
.runtime_resume = dss_runtime_resume,
};
+static const struct of_device_id dss_of_match[] = {
+ { .compatible = "ti,omap3-dss", },
+ { .compatible = "ti,omap4-dss", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, dss_of_match);
+
static struct platform_driver omap_dsshw_driver = {
.remove = __exit_p(omap_dsshw_remove),
.driver = {
.name = "omapdss_dss",
.owner = THIS_MODULE,
.pm = &dss_pm_ops,
+ .of_match_table = dss_of_match,
},
};
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index f538e867c0f8..81c6bc8befea 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -261,6 +261,9 @@ bool dss_div_calc(unsigned long fck_min, dss_div_calc_func func, void *data);
int sdi_init_platform_driver(void) __init;
void sdi_uninit_platform_driver(void) __exit;
+int sdi_init_port(struct platform_device *pdev, struct device_node *port) __init;
+void sdi_uninit_port(void) __exit;
+
/* DSI */
typedef bool (*dsi_pll_calc_func)(int regn, int regm, unsigned long fint,
@@ -372,6 +375,9 @@ static inline bool dsi_pll_calc(struct platform_device *dsidev,
int dpi_init_platform_driver(void) __init;
void dpi_uninit_platform_driver(void) __exit;
+int dpi_init_port(struct platform_device *pdev, struct device_node *port) __init;
+void dpi_uninit_port(void) __exit;
+
/* DISPC */
int dispc_init_platform_driver(void) __init;
void dispc_uninit_platform_driver(void) __exit;
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index ccc569ae7cca..337e3dbb65aa 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -26,6 +26,7 @@
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/string.h>
+#include <linux/of.h>
#include <video/omapdss.h>
#include "dss.h"
@@ -41,6 +42,8 @@ static struct {
int datapairs;
struct omap_dss_device output;
+
+ bool port_initialized;
} sdi;
struct sdi_clk_calc_ctx {
@@ -387,3 +390,45 @@ void __exit sdi_uninit_platform_driver(void)
{
platform_driver_unregister(&omap_sdi_driver);
}
+
+int __init sdi_init_port(struct platform_device *pdev, struct device_node *port)
+{
+ struct device_node *ep;
+ u32 datapairs;
+ int r;
+
+ ep = omapdss_of_get_next_endpoint(port, NULL);
+ if (!ep)
+ return 0;
+
+ r = of_property_read_u32(ep, "datapairs", &datapairs);
+ if (r) {
+ DSSERR("failed to parse datapairs\n");
+ goto err_datapairs;
+ }
+
+ sdi.datapairs = datapairs;
+
+ of_node_put(ep);
+
+ sdi.pdev = pdev;
+
+ sdi_init_output(pdev);
+
+ sdi.port_initialized = true;
+
+ return 0;
+
+err_datapairs:
+ of_node_put(ep);
+
+ return r;
+}
+
+void __exit sdi_uninit_port(void)
+{
+ if (!sdi.port_initialized)
+ return;
+
+ sdi_uninit_output(sdi.pdev);
+}
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 10/27] OMAPDSS: Add DT support to HDMI
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/hdmi4.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/omap2/dss/hdmi4.c
index 16e598787522..97dd05f602f7 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/omap2/dss/hdmi4.c
@@ -671,6 +671,11 @@ static const struct dev_pm_ops hdmi_pm_ops = {
.runtime_resume = hdmi_runtime_resume,
};
+static const struct of_device_id hdmi_of_match[] = {
+ { .compatible = "ti,omap4-hdmi", },
+ {},
+};
+
static struct platform_driver omapdss_hdmihw_driver = {
.probe = omapdss_hdmihw_probe,
.remove = __exit_p(omapdss_hdmihw_remove),
@@ -678,6 +683,7 @@ static struct platform_driver omapdss_hdmihw_driver = {
.name = "omapdss_hdmi",
.owner = THIS_MODULE,
.pm = &hdmi_pm_ops,
+ .of_match_table = hdmi_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 11/27] OMAPDSS: Add DT support to VENC
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/venc.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 5f88ac47b7fa..12185fb6da0e 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -34,6 +34,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include <video/omapdss.h>
@@ -804,6 +805,22 @@ static void __exit venc_uninit_output(struct platform_device *pdev)
omapdss_unregister_output(out);
}
+static int venc_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *ep;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return 0;
+
+ venc.invert_polarity = of_property_read_bool(ep, "invert-polarity");
+
+ of_node_put(ep);
+
+ return 0;
+}
+
/* VENC HW IP initialisation */
static int omap_venchw_probe(struct platform_device *pdev)
{
@@ -845,12 +862,21 @@ static int omap_venchw_probe(struct platform_device *pdev)
venc_runtime_put();
+ if (pdev->dev.of_node) {
+ r = venc_probe_of(pdev);
+ if (r) {
+ DSSERR("Invalid DT data\n");
+ goto err_probe_of;
+ }
+ }
+
dss_debugfs_create_file("venc", venc_dump_regs);
venc_init_output(pdev);
return 0;
+err_probe_of:
err_runtime_get:
pm_runtime_disable(&pdev->dev);
return r;
@@ -894,6 +920,13 @@ static const struct dev_pm_ops venc_pm_ops = {
.runtime_resume = venc_runtime_resume,
};
+
+static const struct of_device_id venc_of_match[] = {
+ { .compatible = "ti,omap3-venc", },
+ { .compatible = "ti,omap4-venc", },
+ {},
+};
+
static struct platform_driver omap_venchw_driver = {
.probe = omap_venchw_probe,
.remove = __exit_p(omap_venchw_remove),
@@ -901,6 +934,7 @@ static struct platform_driver omap_venchw_driver = {
.name = "omapdss_venc",
.owner = THIS_MODULE,
.pm = &venc_pm_ops,
+ .of_match_table = venc_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 12/27] OMAPDSS: Add DT support to DSI
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Add the code to make the DSI driver work with device tree on OMAP3 and
OMAP4.
A minor hack is needed at the moment in the DSI driver: the DSS driver
needs to know the ID number of a DSI device, as clocks are routed in
different ways to the DSI devices. At the moment we don't have any
proper way to manage this, so this patchs adds a simple lookup table
that is used to deduce the ID from the DSI device's base address.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dsi.c | 136 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 135 insertions(+), 1 deletion(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 18b5e84165bb..46edec82c502 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -38,6 +38,8 @@
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <video/omapdss.h>
#include <video/mipi_display.h>
@@ -374,6 +376,13 @@ struct dsi_packet_sent_handler_data {
struct completion *completion;
};
+struct dsi_module_id_data {
+ u32 address;
+ int id;
+};
+
+static const struct of_device_id dsi_of_match[];
+
#ifdef DSI_PERF_MEASURE
static bool dsi_perf;
module_param(dsi_perf, bool, 0644);
@@ -5336,6 +5345,62 @@ static void dsi_uninit_output(struct platform_device *dsidev)
omapdss_unregister_output(out);
}
+static int dsi_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+ struct property *prop;
+ u32 lane_arr[10];
+ int len, num_pins;
+ int r, i;
+ struct device_node *ep;
+ struct omap_dsi_pin_config pin_cfg;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return 0;
+
+ prop = of_find_property(ep, "lanes", &len);
+ if (prop = NULL) {
+ dev_err(&pdev->dev, "failed to find lane data\n");
+ r = -EINVAL;
+ goto err;
+ }
+
+ num_pins = len / sizeof(u32);
+
+ if (num_pins < 4 || num_pins % 2 != 0
+ || num_pins > dsi->num_lanes_supported * 2) {
+ dev_err(&pdev->dev, "bad number of lanes\n");
+ r = -EINVAL;
+ goto err;
+ }
+
+ r = of_property_read_u32_array(ep, "lanes", lane_arr, num_pins);
+ if (r) {
+ dev_err(&pdev->dev, "failed to read lane data\n");
+ goto err;
+ }
+
+ pin_cfg.num_pins = num_pins;
+ for (i = 0; i < num_pins; ++i)
+ pin_cfg.pins[i] = (int)lane_arr[i];
+
+ r = dsi_configure_pins(&dsi->output, &pin_cfg);
+ if (r) {
+ dev_err(&pdev->dev, "failed to configure pins");
+ goto err;
+ }
+
+ of_node_put(ep);
+
+ return 0;
+
+err:
+ of_node_put(ep);
+ return r;
+}
+
/* DSI1 HW IP initialisation */
static int omap_dsihw_probe(struct platform_device *dsidev)
{
@@ -5348,7 +5413,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
if (!dsi)
return -ENOMEM;
- dsi->module_id = dsidev->id;
dsi->pdev = dsidev;
dev_set_drvdata(&dsidev->dev, dsi);
@@ -5398,6 +5462,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
return r;
}
+ if (dsidev->dev.of_node) {
+ const struct of_device_id *match;
+ const struct dsi_module_id_data *d;
+
+ match = of_match_node(dsi_of_match, dsidev->dev.of_node);
+ if (!match) {
+ DSSERR("unsupported DSI module\n");
+ return -ENODEV;
+ }
+
+ d = match->data;
+
+ while (d->address != 0 && d->address != dsi_mem->start)
+ d++;
+
+ if (d->address = 0) {
+ DSSERR("unsupported DSI module\n");
+ return -ENODEV;
+ }
+
+ dsi->module_id = d->id;
+ } else {
+ dsi->module_id = dsidev->id;
+ }
+
/* DSI VCs initialization */
for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
dsi->vc[i].source = DSI_VC_SOURCE_L4;
@@ -5433,6 +5522,19 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
dsi_init_output(dsidev);
+ if (dsidev->dev.of_node) {
+ r = dsi_probe_of(dsidev);
+ if (r) {
+ DSSERR("Invalid DSI DT data\n");
+ goto err_probe_of;
+ }
+
+ r = of_platform_populate(dsidev->dev.of_node, NULL, NULL,
+ &dsidev->dev);
+ if (r)
+ DSSERR("Failed to populate DSI child devices: %d\n", r);
+ }
+
dsi_runtime_put(dsidev);
if (dsi->module_id = 0)
@@ -5446,17 +5548,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
else if (dsi->module_id = 1)
dss_debugfs_create_file("dsi2_irqs", dsi2_dump_irqs);
#endif
+
return 0;
+err_probe_of:
+ dsi_uninit_output(dsidev);
+ dsi_runtime_put(dsidev);
+
err_runtime_get:
pm_runtime_disable(&dsidev->dev);
return r;
}
+static int dsi_unregister_child(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ platform_device_unregister(pdev);
+ return 0;
+}
+
static int __exit omap_dsihw_remove(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ device_for_each_child(&dsidev->dev, NULL, dsi_unregister_child);
+
WARN_ON(dsi->scp_clk_refcount > 0);
dsi_uninit_output(dsidev);
@@ -5494,6 +5610,23 @@ static const struct dev_pm_ops dsi_pm_ops = {
.runtime_resume = dsi_runtime_resume,
};
+static const struct dsi_module_id_data dsi_of_data_omap3[] = {
+ { .address = 0x4804fc00, .id = 0, },
+ { },
+};
+
+static const struct dsi_module_id_data dsi_of_data_omap4[] = {
+ { .address = 0x58004000, .id = 0, },
+ { .address = 0x58005000, .id = 1, },
+ { },
+};
+
+static const struct of_device_id dsi_of_match[] = {
+ { .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
+ { .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
+ {},
+};
+
static struct platform_driver omap_dsihw_driver = {
.probe = omap_dsihw_probe,
.remove = __exit_p(omap_dsihw_remove),
@@ -5501,6 +5634,7 @@ static struct platform_driver omap_dsihw_driver = {
.name = "omapdss_dsi",
.owner = THIS_MODULE,
.pm = &dsi_pm_ops,
+ .of_match_table = dsi_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 13/27] ARM: omap3.dtsi: add omapdss information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index daabf99d402a..c646fa9ae5d3 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -630,5 +630,40 @@
num-eps = <16>;
ram-bits = <12>;
};
+
+ dss: dss@48050000 {
+ compatible = "ti,omap3-dss", "simple-bus";
+ reg = <0x48050000 0x200>;
+ ti,hwmods = "dss_core";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@48050400 {
+ compatible = "ti,omap3-dispc";
+ reg = <0x48050400 0x400>;
+ interrupts = <25>;
+ ti,hwmods = "dss_dispc";
+ };
+
+ dsi: encoder@4804fc00 {
+ compatible = "ti,omap3-dsi";
+ reg = <0x4804fc00 0x400>;
+ interrupts = <25>;
+ ti,hwmods = "dss_dsi1";
+ };
+
+ rfbi: encoder@48050800 {
+ compatible = "ti,omap3-rfbi";
+ reg = <0x48050800 0x100>;
+ ti,hwmods = "dss_rfbi";
+ };
+
+ venc: encoder@48050c00 {
+ compatible = "ti,omap3-venc";
+ reg = <0x48050c00 0x100>;
+ ti,hwmods = "dss_venc";
+ };
+ };
};
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 14/27] ARM: omap4.dtsi: add omapdss information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 54 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index a1e05853afcd..a515f524ef3a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -705,5 +705,59 @@
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
};
+
+ dss: dss@58000000 {
+ compatible = "ti,omap4-dss", "simple-bus";
+ reg = <0x58000000 0x80>;
+ ti,hwmods = "dss_core";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@58001000 {
+ compatible = "ti,omap4-dispc";
+ reg = <0x58001000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ };
+
+ rfbi: encoder@58002000 {
+ compatible = "ti,omap4-rfbi";
+ reg = <0x58002000 0x1000>;
+ ti,hwmods = "dss_rfbi";
+ };
+
+ /*
+ * Accessing venc registers cause a crash on omap4, so
+ * this is disabled for now.
+ */
+ venc: encoder@58003000 {
+ compatible = "ti,omap4-venc";
+ reg = <0x58003000 0x1000>;
+ ti,hwmods = "dss_venc";
+ status = "disabled";
+ };
+
+ dsi1: encoder@58004000 {
+ compatible = "ti,omap4-dsi";
+ reg = <0x58004000 0x200>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dsi1";
+ };
+
+ dsi2: encoder@58005000 {
+ compatible = "ti,omap4-dsi";
+ reg = <0x58005000 0x200>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dsi2";
+ };
+
+ hdmi: encoder@58006000 {
+ compatible = "ti,omap4-hdmi";
+ reg = <0x58006000 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_hdmi";
+ };
+ };
};
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 15/27] ARM: omap4-panda.dts: add display information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 121 +++++++++++++++++++++++++++++-
1 file changed, 117 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 88c6a05cab41..dc71645dee9b 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -112,10 +112,6 @@
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
- &dss_dpi_pins
- &tfp410_pins
- &dss_hdmi_pins
- &tpd12s015_pins
&hsusbb1_pins
>;
@@ -409,3 +405,120 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+};
+
+&dsi1 {
+ vdds_dsi-supply = <&vcxio>;
+};
+
+&dsi2 {
+ vdds_dsi-supply = <&vcxio>;
+};
+
+&hdmi {
+ vdda_hdmi_dac-supply = <&vdac>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ display1 = &hdmi0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+
+ tpd12s015: encoder@1 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@1 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 16/27] ARM: omap4-sdp.dts: add display information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap4-sdp.dts | 116 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c13ada99e0bc..bdfab844533b 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -309,6 +309,22 @@
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
};
&i2c1 {
@@ -551,3 +567,103 @@
mode = <3>;
power = <50>;
};
+
+&dsi1 {
+ vdds_dsi-supply = <&vcxio>;
+
+ dsi1_out_ep: endpoint {
+ remote-endpoint = <&lcd0_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+
+ lcd0: display {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ label = "lcd0";
+
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102, reset */
+
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+ };
+};
+
+&dsi2 {
+ vdds_dsi-supply = <&vcxio>;
+
+ dsi2_out_ep: endpoint {
+ remote-endpoint = <&lcd1_in>;
+ lanes = <0 1 2 3 4 5>;
+ };
+
+ lcd1: display {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ label = "lcd1";
+
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104, reset */
+
+ lcd1_in: endpoint {
+ remote-endpoint = <&dsi2_out_ep>;
+ };
+ };
+};
+
+&hdmi {
+ vdda_hdmi_dac-supply = <&vdac>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ display1 = &lcd1;
+ display2 = &hdmi0;
+ };
+
+ tpd12s015: encoder@0 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 17/27] ARM: omap3-tobi.dts: add lcd (TEST)
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
This is a test for Overo with Palo43 expansion, _not_ Tobi. Palo43
doesn't have a dts, but seems to work ok with omap3-tobi.dts, so I used
it as a test.
Not to be merged.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap3-tobi.dts | 47 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
index 7e4ad2aec37a..3baf3a286435 100644
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -81,3 +81,50 @@
&mmc3 {
status = "disabled";
};
+
+&dss {
+ /* XXX add pinctrl */
+ /*
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+ */
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display@0 {
+ compatible = "samsung,lte430wq-f0c", "panel-dpi";
+ label = "lcd";
+
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+
+ panel-timing {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 18/27] ARM: omap3-beagle.dts: add display information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 115 +++++++++++++++++++++++++++++++++++++
1 file changed, 115 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ba4a625ea5b..b4057762cedd 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -119,6 +119,45 @@
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
};
&i2c1 {
@@ -199,3 +238,79 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+};
+
+&venc {
+ vdda_dac-supply = <&vdac>;
+
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* 170, power-down */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+
+ tv0: connector@1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 19/27] ARM: omap3-beagle-xm.dts: add display information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap3-beagle-xm.dts | 118 ++++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index df33a50bc070..60430e8229a9 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -94,6 +94,17 @@
0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
>;
};
+
+ dss_dpi_pins2: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
};
&omap3_pmx_core {
@@ -125,6 +136,35 @@
0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
>;
};
+
+ dss_dpi_pins1: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ 0x0d0 (PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
+ 0x0da (PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
};
&i2c1 {
@@ -222,3 +262,81 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins1
+ &dss_dpi_pins2
+ >;
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+};
+
+&venc {
+ vdda_dac-supply = <&vdac>;
+
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+ /* XXX pinctrl from twl */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+
+ tv0: connector@1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 20/27] ARM: omap3-igep0020.dts: add display information
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree
Cc: Javier Martinez Canillas, Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
The IGEPv2 has a TFP410 DPI-to-DVI encoder attached
to OMAP's Display SubSystem (DSS). Add DeviceTree
nodes for these devices.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
arch/arm/boot/dts/omap3-igep0020.dts | 64 +++++++++++++++++++++++++++++++++---
1 file changed, 60 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index b9a9e17acb58..6d34abf5b421 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -67,8 +67,6 @@
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
- &tfp410_pins
- &dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
@@ -88,13 +86,13 @@
>;
};
- tfp410_pins: tfp410_dvi_pins {
+ tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
- dss_pins: pinmux_dss_dvi_pins {
+ dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
@@ -215,3 +213,61 @@
&usbhsehci {
phys = <&hsusb1_phy>;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+};
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* 170, power-down */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 21/27] OMAPDSS: panel-dsi-cm: Add DT support
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
XXX ULPS and backlight missing.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/panel-dsi-cm.c | 65 +++++++++++++++++++++++--
1 file changed, 61 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/omap2/displays-new/panel-dsi-cm.c
index b7baafe83aa3..fda7728bdfaa 100644
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ b/drivers/video/omap2/displays-new/panel-dsi-cm.c
@@ -22,6 +22,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -595,10 +597,13 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
.lp_clk_max = 10000000,
};
- r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
- if (r) {
- dev_err(&ddata->pdev->dev, "failed to configure DSI pins\n");
- goto err0;
+ if (ddata->pin_config.num_pins > 0) {
+ r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
+ if (r) {
+ dev_err(&ddata->pdev->dev,
+ "failed to configure DSI pins\n");
+ goto err0;
+ }
}
r = in->ops.dsi->set_config(in, &dsi_config);
@@ -1156,6 +1161,46 @@ static int dsicm_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int dsicm_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *in;
+ int gpio;
+
+ gpio = of_get_gpio(node, 0);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(&pdev->dev, "failed to parse reset gpio\n");
+ return gpio;
+ }
+ ddata->reset_gpio = gpio;
+
+ if (of_gpio_count(node) > 1) {
+ gpio = of_get_gpio(node, 1);
+
+ if (gpio_is_valid(gpio) || gpio = -ENOENT) {
+ ddata->ext_te_gpio = gpio;
+ } else {
+ dev_err(&pdev->dev, "failed to parse TE gpio\n");
+ return gpio;
+ }
+ } else {
+ ddata->ext_te_gpio = -1;
+ }
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ /* TODO: ulps, backlight */
+
+ return 0;
+}
+
static int dsicm_probe(struct platform_device *pdev)
{
struct backlight_properties props;
@@ -1178,6 +1223,10 @@ static int dsicm_probe(struct platform_device *pdev)
r = dsicm_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = dsicm_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -1320,12 +1369,20 @@ static int __exit dsicm_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id dsicm_of_match[] = {
+ { .compatible = "panel-dsi-cm", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, dsicm_of_match);
+
static struct platform_driver dsicm_driver = {
.probe = dsicm_probe,
.remove = __exit_p(dsicm_remove),
.driver = {
.name = "panel-dsi-cm",
.owner = THIS_MODULE,
+ .of_match_table = dsicm_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 22/27] OMAPDSS: encoder-tfp410: Add DT support
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/encoder-tfp410.c | 43 ++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/omap2/displays-new/encoder-tfp410.c
index 4a291e756be9..2c664d476788 100644
--- a/drivers/video/omap2/displays-new/encoder-tfp410.c
+++ b/drivers/video/omap2/displays-new/encoder-tfp410.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -82,7 +83,8 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
return 0;
in->ops.dpi->set_timings(in, &ddata->timings);
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
r = in->ops.dpi->enable(in);
if (r)
@@ -179,6 +181,33 @@ static int tfp410_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int tfp410_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+ int gpio;
+
+ gpio = of_get_gpio(node, 0);
+
+ if (gpio_is_valid(gpio) || gpio = -ENOENT) {
+ ddata->pd_gpio = gpio;
+ } else {
+ dev_err(&pdev->dev, "failed to parse PD gpio\n");
+ return gpio;
+ }
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int tfp410_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
@@ -195,6 +224,10 @@ static int tfp410_probe(struct platform_device *pdev)
r = tfp410_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = tfp410_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -251,12 +284,20 @@ static int __exit tfp410_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id tfp410_of_match[] = {
+ { .compatible = "ti,tfp410", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, tfp410_of_match);
+
static struct platform_driver tfp410_driver = {
.probe = tfp410_probe,
.remove = __exit_p(tfp410_remove),
.driver = {
.name = "tfp410",
.owner = THIS_MODULE,
+ .of_match_table = tfp410_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 23/27] OMAPDSS: connector-dvi: Add DT support
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/connector-dvi.c | 43 ++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/omap2/displays-new/connector-dvi.c
index b6c50904038e..d1204b1c5182 100644
--- a/drivers/video/omap2/displays-new/connector-dvi.c
+++ b/drivers/video/omap2/displays-new/connector-dvi.c
@@ -277,6 +277,37 @@ static int dvic_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int dvic_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+ struct device_node *adapter_node;
+ struct i2c_adapter *adapter;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ adapter_node = of_parse_phandle(node, "i2c-bus", 0);
+ if (adapter_node) {
+ adapter = of_find_i2c_adapter_by_node(adapter_node);
+ if (adapter = NULL) {
+ dev_err(&pdev->dev, "failed to parse i2c-bus\n");
+ omap_dss_put_device(ddata->in);
+ return -EPROBE_DEFER;
+ }
+
+ ddata->i2c_adapter = adapter;
+ }
+
+ return 0;
+}
+
static int dvic_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
@@ -293,6 +324,10 @@ static int dvic_probe(struct platform_device *pdev)
r = dvic_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = dvic_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -342,12 +377,20 @@ static int __exit dvic_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id dvic_of_match[] = {
+ { .compatible = "dvi-connector", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, dvic_of_match);
+
static struct platform_driver dvi_connector_driver = {
.probe = dvic_probe,
.remove = __exit_p(dvic_remove),
.driver = {
.name = "connector-dvi",
.owner = THIS_MODULE,
+ .of_match_table = dvic_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 24/27] OMAPDSS: encoder-tpd12s015: Add DT support
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
.../video/omap2/displays-new/encoder-tpd12s015.c | 56 ++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
index d5c936cb217f..6529a4ff50ca 100644
--- a/drivers/video/omap2/displays-new/encoder-tpd12s015.c
+++ b/drivers/video/omap2/displays-new/encoder-tpd12s015.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -289,6 +290,49 @@ static int tpd_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int tpd_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+ int gpio;
+
+ /* CT CP HPD GPIO */
+ gpio = of_get_gpio(node, 0);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(&pdev->dev, "failed to parse CT CP HPD gpio\n");
+ return gpio;
+ }
+ ddata->ct_cp_hpd_gpio = gpio;
+
+ /* LS OE GPIO */
+ gpio = of_get_gpio(node, 1);
+ if (gpio_is_valid(gpio) || gpio = -ENOENT) {
+ ddata->ls_oe_gpio = gpio;
+ } else {
+ dev_err(&pdev->dev, "failed to parse LS OE gpio\n");
+ return gpio;
+ }
+
+ /* HPD GPIO */
+ gpio = of_get_gpio(node, 2);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(&pdev->dev, "failed to parse HPD gpio\n");
+ return gpio;
+ }
+ ddata->hpd_gpio = gpio;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int tpd_probe(struct platform_device *pdev)
{
struct omap_dss_device *in, *dssdev;
@@ -307,6 +351,10 @@ static int tpd_probe(struct platform_device *pdev)
r = tpd_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = tpd_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -379,12 +427,20 @@ static int __exit tpd_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id tpd_of_match[] = {
+ { .compatible = "ti,tpd12s015", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, tpd_of_match);
+
static struct platform_driver tpd_driver = {
.probe = tpd_probe,
.remove = __exit_p(tpd_remove),
.driver = {
.name = "tpd12s015",
.owner = THIS_MODULE,
+ .of_match_table = tpd_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
* [PATCHv2 25/27] OMAPDSS: hdmi-connector: Add DT support
From: Tomi Valkeinen @ 2013-12-16 14:56 UTC (permalink / raw)
To: linux-omap, linux-fbdev, devicetree; +Cc: Tomi Valkeinen
In-Reply-To: <1387205794-32246-1-git-send-email-tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays-new/connector-hdmi.c | 30 +++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/omap2/displays-new/connector-hdmi.c
index 9abe2c039ae9..12246b5841c0 100644
--- a/drivers/video/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/omap2/displays-new/connector-hdmi.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <drm/drm_edid.h>
@@ -301,6 +302,23 @@ static int hdmic_probe_pdata(struct platform_device *pdev)
return 0;
}
+static int hdmic_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int hdmic_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
@@ -318,6 +336,10 @@ static int hdmic_probe(struct platform_device *pdev)
r = hdmic_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = hdmic_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -359,12 +381,20 @@ static int __exit hdmic_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id hdmic_of_match[] = {
+ { .compatible = "hdmi-connector", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, hdmic_of_match);
+
static struct platform_driver hdmi_connector_driver = {
.probe = hdmic_probe,
.remove = __exit_p(hdmic_remove),
.driver = {
.name = "connector-hdmi",
.owner = THIS_MODULE,
+ .of_match_table = hdmic_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox