* [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
From: Sean Paul @ 2014-12-03 1:39 UTC (permalink / raw)
To: milo.kim-l0cyMroinI0, cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: jg1.han-Sze3O3UU22JBDgjK7y7TUQ, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
Sean Paul, Stéphane Marchesin
This patch refactors the dt parsing code to avoid setting platform_data,
instead just setting lp->pdata directly. This facilitates easier
probe deferral since the current scheme would require us to clear out
dev->platform_data before deferring.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
drivers/video/backlight/lp855x_bl.c | 37 ++++++++++++++++++-------------------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 25fb8e3..257b3ba 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -341,8 +341,10 @@ static const struct attribute_group lp855x_attr_group = {
};
#ifdef CONFIG_OF
-static int lp855x_parse_dt(struct device *dev, struct device_node *node)
+static int lp855x_parse_dt(struct lp855x *lp)
{
+ struct device *dev = lp->dev;
+ struct device_node *node = dev->of_node;
struct lp855x_platform_data *pdata;
int rom_length;
@@ -381,12 +383,12 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
pdata->rom_data = &rom[0];
}
- dev->platform_data = pdata;
+ lp->pdata = pdata;
return 0;
}
#else
-static int lp855x_parse_dt(struct device *dev, struct device_node *node)
+static int lp855x_parse_dt(struct lp855x *lp)
{
return -EINVAL;
}
@@ -395,18 +397,8 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
struct lp855x *lp;
- struct lp855x_platform_data *pdata = dev_get_platdata(&cl->dev);
- struct device_node *node = cl->dev.of_node;
int ret;
- if (!pdata) {
- ret = lp855x_parse_dt(&cl->dev, node);
- if (ret < 0)
- return ret;
-
- pdata = dev_get_platdata(&cl->dev);
- }
-
if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
@@ -414,16 +406,23 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
if (!lp)
return -ENOMEM;
- if (pdata->period_ns > 0)
- lp->mode = PWM_BASED;
- else
- lp->mode = REGISTER_BASED;
-
lp->client = cl;
lp->dev = &cl->dev;
- lp->pdata = pdata;
lp->chipname = id->name;
lp->chip_id = id->driver_data;
+ lp->pdata = dev_get_platdata(&cl->dev);
+
+ if (!lp->pdata) {
+ ret = lp855x_parse_dt(lp);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (lp->pdata->period_ns > 0)
+ lp->mode = PWM_BASED;
+ else
+ lp->mode = REGISTER_BASED;
+
i2c_set_clientdata(cl, lp);
ret = lp855x_configure(lp);
--
2.1.1
^ permalink raw reply related
* [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
From: Sean Paul @ 2014-12-03 1:39 UTC (permalink / raw)
To: milo.kim-l0cyMroinI0, cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: jg1.han-Sze3O3UU22JBDgjK7y7TUQ, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
Sean Paul, Stéphane Marchesin, Aaron Durbin
In-Reply-To: <1417570752-23633-1-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
This patch adds a supply regulator to the lp855x platform data to facilitate
powering on/off the 3V rail attached to the controller.
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Aaron Durbin <adurbin@chromium.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
Changes in v2:
- Add NULL check in lp855x_remove
.../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
include/linux/platform_data/lp855x.h | 2 ++
3 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
index 96e83a5..0a3ecbc 100644
--- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
@@ -12,6 +12,7 @@ Optional properties:
- pwm-period: PWM period value. Set only PWM input mode used (u32)
- rom-addr: Register address of ROM area to be updated (u8)
- rom-val: Register value to be updated (u8)
+ - power-supply: Regulator which controls the 3V rail
Example:
@@ -56,6 +57,7 @@ Example:
backlight@2c {
compatible = "ti,lp8557";
reg = <0x2c>;
+ power-supply = <&backlight_vdd>;
dev-ctrl = /bits/ 8 <0x41>;
init-brt = /bits/ 8 <0x0a>;
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 257b3ba..a26d3bb 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -17,6 +17,7 @@
#include <linux/of.h>
#include <linux/platform_data/lp855x.h>
#include <linux/pwm.h>
+#include <linux/regulator/consumer.h>
/* LP8550/1/2/3/6 Registers */
#define LP855X_BRIGHTNESS_CTRL 0x00
@@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp)
pdata->rom_data = &rom[0];
}
+ pdata->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(pdata->supply)) {
+ if (PTR_ERR(pdata->supply) = -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ pdata->supply = NULL;
+ }
+
lp->pdata = pdata;
return 0;
@@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
else
lp->mode = REGISTER_BASED;
+ if (lp->pdata->supply) {
+ ret = regulator_enable(lp->pdata->supply);
+ if (ret < 0) {
+ dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
+ return ret;
+ }
+ }
+
i2c_set_clientdata(cl, lp);
ret = lp855x_configure(lp);
@@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl)
lp->bl->props.brightness = 0;
backlight_update_status(lp->bl);
+ if (lp->pdata->supply)
+ regulator_disable(lp->pdata->supply);
sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
return 0;
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 1b2ba24..9c7fd1e 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h
@@ -136,6 +136,7 @@ struct lp855x_rom_data {
Only valid when mode is PWM_BASED.
* @size_program : total size of lp855x_rom_data
* @rom_data : list of new eeprom/eprom registers
+ * @supply : regulator that supplies 3V input
*/
struct lp855x_platform_data {
const char *name;
@@ -144,6 +145,7 @@ struct lp855x_platform_data {
unsigned int period_ns;
int size_program;
struct lp855x_rom_data *rom_data;
+ struct regulator *supply;
};
#endif
--
2.2.0.rc0.207.ga3a616c
^ permalink raw reply related
* Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
From: Bryan Wu @ 2014-12-03 1:49 UTC (permalink / raw)
To: Sean Paul
Cc: 김우겸, FBDEV list,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Jingoo Han,
Lee Jones, Stéphane Marchesin
In-Reply-To: <1417570752-23633-1-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On Tue, Dec 2, 2014 at 5:39 PM, Sean Paul <seanpaul@chromium.org> wrote:
> This patch refactors the dt parsing code to avoid setting platform_data,
> instead just setting lp->pdata directly. This facilitates easier
> probe deferral since the current scheme would require us to clear out
> dev->platform_data before deferring.
>
Looks good to me,
Acked-by: Bryan Wu <cooloney@gmail.com>
Please also wait for Milo to ack. Lee, can you take this patch?
Thanks,
-Bryan
> Cc: Stéphane Marchesin <marcheu@chromium.org>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
> drivers/video/backlight/lp855x_bl.c | 37 ++++++++++++++++++-------------------
> 1 file changed, 18 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 25fb8e3..257b3ba 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -341,8 +341,10 @@ static const struct attribute_group lp855x_attr_group = {
> };
>
> #ifdef CONFIG_OF
> -static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> +static int lp855x_parse_dt(struct lp855x *lp)
> {
> + struct device *dev = lp->dev;
> + struct device_node *node = dev->of_node;
> struct lp855x_platform_data *pdata;
> int rom_length;
>
> @@ -381,12 +383,12 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> pdata->rom_data = &rom[0];
> }
>
> - dev->platform_data = pdata;
> + lp->pdata = pdata;
>
> return 0;
> }
> #else
> -static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> +static int lp855x_parse_dt(struct lp855x *lp)
> {
> return -EINVAL;
> }
> @@ -395,18 +397,8 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> {
> struct lp855x *lp;
> - struct lp855x_platform_data *pdata = dev_get_platdata(&cl->dev);
> - struct device_node *node = cl->dev.of_node;
> int ret;
>
> - if (!pdata) {
> - ret = lp855x_parse_dt(&cl->dev, node);
> - if (ret < 0)
> - return ret;
> -
> - pdata = dev_get_platdata(&cl->dev);
> - }
> -
> if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> return -EIO;
>
> @@ -414,16 +406,23 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> if (!lp)
> return -ENOMEM;
>
> - if (pdata->period_ns > 0)
> - lp->mode = PWM_BASED;
> - else
> - lp->mode = REGISTER_BASED;
> -
> lp->client = cl;
> lp->dev = &cl->dev;
> - lp->pdata = pdata;
> lp->chipname = id->name;
> lp->chip_id = id->driver_data;
> + lp->pdata = dev_get_platdata(&cl->dev);
> +
> + if (!lp->pdata) {
> + ret = lp855x_parse_dt(lp);
> + if (ret < 0)
> + return ret;
> + }
> +
> + if (lp->pdata->period_ns > 0)
> + lp->mode = PWM_BASED;
> + else
> + lp->mode = REGISTER_BASED;
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> --
> 2.1.1
>
^ permalink raw reply
* Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
From: Kim, Milo @ 2014-12-03 1:56 UTC (permalink / raw)
To: Sean Paul
Cc: cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, jg1.han-Sze3O3UU22JBDgjK7y7TUQ,
lee.jones-QSEj5FYQhm4dnm+yROfE0A, Stéphane Marchesin
In-Reply-To: <1417570752-23633-1-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On 12/3/2014 10:39 AM, Sean Paul wrote:
> This patch refactors the dt parsing code to avoid setting platform_data,
> instead just setting lp->pdata directly. This facilitates easier
> probe deferral since the current scheme would require us to clear out
> dev->platform_data before deferring.
>
> Cc: Stéphane Marchesin<marcheu@chromium.org>
> Signed-off-by: Sean Paul<seanpaul@chromium.org>
Acked-by: Milo Kim <milo.kim@ti.com>
^ permalink raw reply
* Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
From: Kim, Milo @ 2014-12-03 1:57 UTC (permalink / raw)
To: Sean Paul
Cc: cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, jg1.han-Sze3O3UU22JBDgjK7y7TUQ,
lee.jones-QSEj5FYQhm4dnm+yROfE0A, Stéphane Marchesin,
Aaron Durbin
In-Reply-To: <1417570752-23633-2-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On 12/3/2014 10:39 AM, Sean Paul wrote:
> This patch adds a supply regulator to the lp855x platform data to facilitate
> powering on/off the 3V rail attached to the controller.
>
> Cc: Stéphane Marchesin<marcheu@chromium.org>
> Cc: Aaron Durbin<adurbin@chromium.org>
> Acked-by: Milo Kim<milo.kim@ti.com>
> Signed-off-by: Sean Paul<seanpaul@chromium.org>
Acked-by: Milo Kim <milo.kim@ti.com>
^ permalink raw reply
* Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
From: Jingoo Han @ 2014-12-03 2:06 UTC (permalink / raw)
To: 'Sean Paul'
Cc: milo.kim-l0cyMroinI0, cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
'Stéphane Marchesin', 'Aaron Durbin',
'Jingoo Han'
In-Reply-To: <1417570752-23633-2-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On Wednesday, December 03, 2014 10:39 AM, Sean Paul wrote:
>
> This patch adds a supply regulator to the lp855x platform data to facilitate
> powering on/off the 3V rail attached to the controller.
>
> Cc: Stéphane Marchesin <marcheu@chromium.org>
> Cc: Aaron Durbin <adurbin@chromium.org>
> Acked-by: Milo Kim <milo.kim@ti.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Best regards,
Jingoo Han
> ---
>
> Changes in v2:
> - Add NULL check in lp855x_remove
>
>
> .../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
> drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
> include/linux/platform_data/lp855x.h | 2 ++
> 3 files changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> index 96e83a5..0a3ecbc 100644
> --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> @@ -12,6 +12,7 @@ Optional properties:
> - pwm-period: PWM period value. Set only PWM input mode used (u32)
> - rom-addr: Register address of ROM area to be updated (u8)
> - rom-val: Register value to be updated (u8)
> + - power-supply: Regulator which controls the 3V rail
>
> Example:
>
> @@ -56,6 +57,7 @@ Example:
> backlight@2c {
> compatible = "ti,lp8557";
> reg = <0x2c>;
> + power-supply = <&backlight_vdd>;
>
> dev-ctrl = /bits/ 8 <0x41>;
> init-brt = /bits/ 8 <0x0a>;
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 257b3ba..a26d3bb 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -17,6 +17,7 @@
> #include <linux/of.h>
> #include <linux/platform_data/lp855x.h>
> #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>
> /* LP8550/1/2/3/6 Registers */
> #define LP855X_BRIGHTNESS_CTRL 0x00
> @@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp)
> pdata->rom_data = &rom[0];
> }
>
> + pdata->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(pdata->supply)) {
> + if (PTR_ERR(pdata->supply) = -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + pdata->supply = NULL;
> + }
> +
> lp->pdata = pdata;
>
> return 0;
> @@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> else
> lp->mode = REGISTER_BASED;
>
> + if (lp->pdata->supply) {
> + ret = regulator_enable(lp->pdata->supply);
> + if (ret < 0) {
> + dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
> + return ret;
> + }
> + }
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> @@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl)
>
> lp->bl->props.brightness = 0;
> backlight_update_status(lp->bl);
> + if (lp->pdata->supply)
> + regulator_disable(lp->pdata->supply);
> sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>
> return 0;
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> index 1b2ba24..9c7fd1e 100644
> --- a/include/linux/platform_data/lp855x.h
> +++ b/include/linux/platform_data/lp855x.h
> @@ -136,6 +136,7 @@ struct lp855x_rom_data {
> Only valid when mode is PWM_BASED.
> * @size_program : total size of lp855x_rom_data
> * @rom_data : list of new eeprom/eprom registers
> + * @supply : regulator that supplies 3V input
> */
> struct lp855x_platform_data {
> const char *name;
> @@ -144,6 +145,7 @@ struct lp855x_platform_data {
> unsigned int period_ns;
> int size_program;
> struct lp855x_rom_data *rom_data;
> + struct regulator *supply;
> };
>
> #endif
> --
> 2.2.0.rc0.207.ga3a616c
^ permalink raw reply
* Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
From: Jingoo Han @ 2014-12-03 2:08 UTC (permalink / raw)
To: 'Sean Paul'
Cc: milo.kim-l0cyMroinI0, cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
lee.jones-QSEj5FYQhm4dnm+yROfE0A,
'Stéphane Marchesin', 'Jingoo Han'
In-Reply-To: <1417570752-23633-1-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On Wednesday, December 03, 2014 10:39 AM, Sean Paul wrote:
>
> This patch refactors the dt parsing code to avoid setting platform_data,
> instead just setting lp->pdata directly. This facilitates easier
> probe deferral since the current scheme would require us to clear out
> dev->platform_data before deferring.
>
> Cc: Stéphane Marchesin <marcheu@chromium.org>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Best regards,
Jingoo Han
> ---
> drivers/video/backlight/lp855x_bl.c | 37 ++++++++++++++++++-------------------
> 1 file changed, 18 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 25fb8e3..257b3ba 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -341,8 +341,10 @@ static const struct attribute_group lp855x_attr_group = {
> };
>
> #ifdef CONFIG_OF
> -static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> +static int lp855x_parse_dt(struct lp855x *lp)
> {
> + struct device *dev = lp->dev;
> + struct device_node *node = dev->of_node;
> struct lp855x_platform_data *pdata;
> int rom_length;
>
> @@ -381,12 +383,12 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> pdata->rom_data = &rom[0];
> }
>
> - dev->platform_data = pdata;
> + lp->pdata = pdata;
>
> return 0;
> }
> #else
> -static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> +static int lp855x_parse_dt(struct lp855x *lp)
> {
> return -EINVAL;
> }
> @@ -395,18 +397,8 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> {
> struct lp855x *lp;
> - struct lp855x_platform_data *pdata = dev_get_platdata(&cl->dev);
> - struct device_node *node = cl->dev.of_node;
> int ret;
>
> - if (!pdata) {
> - ret = lp855x_parse_dt(&cl->dev, node);
> - if (ret < 0)
> - return ret;
> -
> - pdata = dev_get_platdata(&cl->dev);
> - }
> -
> if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> return -EIO;
>
> @@ -414,16 +406,23 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> if (!lp)
> return -ENOMEM;
>
> - if (pdata->period_ns > 0)
> - lp->mode = PWM_BASED;
> - else
> - lp->mode = REGISTER_BASED;
> -
> lp->client = cl;
> lp->dev = &cl->dev;
> - lp->pdata = pdata;
> lp->chipname = id->name;
> lp->chip_id = id->driver_data;
> + lp->pdata = dev_get_platdata(&cl->dev);
> +
> + if (!lp->pdata) {
> + ret = lp855x_parse_dt(lp);
> + if (ret < 0)
> + return ret;
> + }
> +
> + if (lp->pdata->period_ns > 0)
> + lp->mode = PWM_BASED;
> + else
> + lp->mode = REGISTER_BASED;
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> --
> 2.1.1
^ permalink raw reply
* Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
From: Bryan Wu @ 2014-12-03 2:13 UTC (permalink / raw)
To: Sean Paul
Cc: 김우겸, FBDEV list,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Jingoo Han,
Lee Jones, Stéphane Marchesin, Aaron Durbin
In-Reply-To: <1417570752-23633-2-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On Tue, Dec 2, 2014 at 5:39 PM, Sean Paul <seanpaul@chromium.org> wrote:
> This patch adds a supply regulator to the lp855x platform data to facilitate
> powering on/off the 3V rail attached to the controller.
>
> Cc: Stéphane Marchesin <marcheu@chromium.org>
> Cc: Aaron Durbin <adurbin@chromium.org>
> Acked-by: Milo Kim <milo.kim@ti.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Bryan Wu <cooloney@gmail.com>
Thanks,
-Bryan
> ---
>
> Changes in v2:
> - Add NULL check in lp855x_remove
>
>
> .../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
> drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
> include/linux/platform_data/lp855x.h | 2 ++
> 3 files changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> index 96e83a5..0a3ecbc 100644
> --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> @@ -12,6 +12,7 @@ Optional properties:
> - pwm-period: PWM period value. Set only PWM input mode used (u32)
> - rom-addr: Register address of ROM area to be updated (u8)
> - rom-val: Register value to be updated (u8)
> + - power-supply: Regulator which controls the 3V rail
>
> Example:
>
> @@ -56,6 +57,7 @@ Example:
> backlight@2c {
> compatible = "ti,lp8557";
> reg = <0x2c>;
> + power-supply = <&backlight_vdd>;
>
> dev-ctrl = /bits/ 8 <0x41>;
> init-brt = /bits/ 8 <0x0a>;
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 257b3ba..a26d3bb 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -17,6 +17,7 @@
> #include <linux/of.h>
> #include <linux/platform_data/lp855x.h>
> #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>
> /* LP8550/1/2/3/6 Registers */
> #define LP855X_BRIGHTNESS_CTRL 0x00
> @@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp)
> pdata->rom_data = &rom[0];
> }
>
> + pdata->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(pdata->supply)) {
> + if (PTR_ERR(pdata->supply) = -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + pdata->supply = NULL;
> + }
> +
> lp->pdata = pdata;
>
> return 0;
> @@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> else
> lp->mode = REGISTER_BASED;
>
> + if (lp->pdata->supply) {
> + ret = regulator_enable(lp->pdata->supply);
> + if (ret < 0) {
> + dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
> + return ret;
> + }
> + }
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> @@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl)
>
> lp->bl->props.brightness = 0;
> backlight_update_status(lp->bl);
> + if (lp->pdata->supply)
> + regulator_disable(lp->pdata->supply);
> sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>
> return 0;
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> index 1b2ba24..9c7fd1e 100644
> --- a/include/linux/platform_data/lp855x.h
> +++ b/include/linux/platform_data/lp855x.h
> @@ -136,6 +136,7 @@ struct lp855x_rom_data {
> Only valid when mode is PWM_BASED.
> * @size_program : total size of lp855x_rom_data
> * @rom_data : list of new eeprom/eprom registers
> + * @supply : regulator that supplies 3V input
> */
> struct lp855x_platform_data {
> const char *name;
> @@ -144,6 +145,7 @@ struct lp855x_platform_data {
> unsigned int period_ns;
> int size_program;
> struct lp855x_rom_data *rom_data;
> + struct regulator *supply;
> };
>
> #endif
> --
> 2.2.0.rc0.207.ga3a616c
>
^ permalink raw reply
* [PATCH v10 0/6] Add Skyworks SKY81452 device drivers
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo-VuQAYsv1563Yd54FQh9/CA, lee.jones-QSEj5FYQhm4dnm+yROfE0A,
grant.likely-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, jg1.han-Sze3O3UU22JBDgjK7y7TUQ,
cooloney-Re5JQEeQqe8AvxtiuMwx3w, pawel.moll-5wv7dgnIgG8,
mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, trivial-DgEjT+Ai2ygdnm+yROfE0A
Cc: akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b,
jic23-DgEjT+Ai2ygdnm+yROfE0A,
thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
ktsai-GubuWUlQtMwciDkP5Hr2oA, hs-ynQEQJNshbs,
stwiss.opensource-WBD+wuPFNBhBDgjK7y7TUQ,
matti.vaittinen-OYasijW0DpE, broonie-DgEjT+Ai2ygdnm+yROfE0A,
jason-NLaQJdtUoK4Be96aLqz0jA, heiko-4mtYJXux2i+zQB+pC5nmwQ,
shawn.guo-KZfg59tc24xl57MIdRCFDg, florian.vaussard-p8DiymsW2f8,
andrew-g2DYL2Zd6BY, antonynpavlov-Re5JQEeQqe8AvxtiuMwx3w,
hytszk-Re5JQEeQqe8AvxtiuMwx3w, plagnioj-sclMFOaUSTBWk0Htik3J/w,
tomi.valkeinen-l0cyMroinI0, jack.yoo-tjhQNA90jdKqndwCJWfcng,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
This patch set includes regulator and backlight driver for SKY81452.
Also it includes documents for device tree and module.
sky81452-regulator was already applied. So this series doesn't
include it.
v10:
Removed trivial get_brightness implementations for sky81452-backlight
v9:
Removed the change to remove MODULE_VERSION() for sky81452-regulator
v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT
Changed the DT parsing of regulator using regulator_node and of_match
v7:
Modified licensing text to GPLv2
Splitted Kconfig renaming from DT patch
v6:
Added new line character at the end of line of dev_err()
v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver
Modified sky81452-regulator to return EINVAL when of_node is NULL
Move sky81452-backlight.h to include/linux/platform_data
v4:
Removed MODULE_VERSION()
Modified license to GPLv2
Removed calling to backlight_device_unregister() in sky81452-backlight
v3:
Cleaned-up DBG messages
Cleaned-up DT
Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
Assigned mfd_cell.of_compatible for binding device node
Modified error messages
Modified sky81452-regulator to return ENODATA when of_node is NULL
v2:
Split the patches for each sub-system
Added 'reg' attribute for I2C address in device tree documents
Added 'compatible' attribute in child drivers
Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
Added message for exception or errors.
Added vendor prefix for Skyworks Solutions, Inc.
Add SKY81452 to the Trivial Devices list
Gyungoh Yoo (6):
mfd: Add support for Skyworks SKY81452 driver
backlight: Add support Skyworks SKY81452 backlight driver
devicetree: mfd: Add new SKY81452 mfd binding
devicetree: backlight: Add new SKY81452 backlight binding
devicetree: Add vendor prefix for Skyworks Solutions, Inc.
devicetree: i2c: Add SKY81452 to the Trivial Devices list
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
Documentation/devicetree/bindings/mfd/sky81452.txt | 36 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
.../video/backlight/sky81452-backlight.txt | 29 ++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/sky81452.c | 108 +++++++
drivers/video/backlight/Kconfig | 10 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/sky81452-backlight.c | 334 +++++++++++++++++++++
include/linux/mfd/sky81452.h | 31 ++
include/linux/platform_data/sky81452-backlight.h | 46 +++
12 files changed, 610 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
create mode 100644 drivers/mfd/sky81452.c
create mode 100644 drivers/video/backlight/sky81452-backlight.c
create mode 100644 include/linux/mfd/sky81452.h
create mode 100644 include/linux/platform_data/sky81452-backlight.h
--
1.9.1
^ permalink raw reply
* [PATCH v10 1/6] mfd: Add support for Skyworks SKY81452 driver
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-1-git-send-email-jack.yoo@skyworksinc.com>
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
Changes v10:
Nothing
Changes v9:
Nothing
Changes v8:
Nothing
Changes v7:
Modified licensing text to GPLv2
Changes v6:
Added new line character at the end of line of dev_err()
Changes v5:
Move sky81452-backlight.h to include/linux/platform_data
Changes v4:
Removed MODULE_VERSION()
Modified license to GPLv2
Changes v3:
Fixed the backlight name from 'sky81452-bl' to 'sky81452-backlight'
Assigned mfd_cell.of_compatible for binding device node
Modified error messages
Changes v2:
Renamed CONFIG_SKY81452 to CONFIG_MFD_SKY81452
Changed the dependency from I2C=y to I2C, for CONFIG_MFD_SKY81452
Added message for exception or errors
drivers/mfd/Kconfig | 12 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/sky81452.c | 108 +++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/sky81452.h | 31 +++++++++++++
4 files changed, 152 insertions(+)
create mode 100644 drivers/mfd/sky81452.c
create mode 100644 include/linux/mfd/sky81452.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea7..a54244c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -693,6 +693,18 @@ config MFD_SM501_GPIO
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
+config MFD_SKY81452
+ tristate "Skyworks Solutions SKY81452"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ This is the core driver for the Skyworks SKY81452 backlight and
+ voltage regulator device.
+
+ This driver can also be built as a module. If so, the module
+ will be called sky81452.
+
config MFD_SMSC
bool "SMSC ECE1099 series chips"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8bd54b1..d9683ea 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -174,6 +174,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_SKY81452) += sky81452.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/sky81452.c b/drivers/mfd/sky81452.c
new file mode 100644
index 0000000..b0c9b04
--- /dev/null
+++ b/drivers/mfd/sky81452.c
@@ -0,0 +1,108 @@
+/*
+ * sky81452.c SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/sky81452.h>
+
+static const struct regmap_config sky81452_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int sky81452_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ const struct sky81452_platform_data *pdata = dev_get_platdata(dev);
+ struct mfd_cell cells[2];
+ struct regmap *regmap;
+ int ret;
+
+ if (!pdata) {
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &sky81452_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to initialize.err=%ld\n", PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ i2c_set_clientdata(client, regmap);
+
+ memset(cells, 0, sizeof(cells));
+ cells[0].name = "sky81452-backlight";
+ cells[0].of_compatible = "skyworks,sky81452-backlight";
+ cells[0].platform_data = pdata->bl_pdata;
+ cells[0].pdata_size = sizeof(*pdata->bl_pdata);
+ cells[1].name = "sky81452-regulator";
+ cells[1].platform_data = pdata->regulator_init_data;
+ cells[1].pdata_size = sizeof(*pdata->regulator_init_data);
+
+ ret = mfd_add_devices(dev, -1, cells, ARRAY_SIZE(cells), NULL, 0, NULL);
+ if (ret)
+ dev_err(dev, "failed to add child devices. err=%d\n", ret);
+
+ return ret;
+}
+
+static int sky81452_remove(struct i2c_client *client)
+{
+ mfd_remove_devices(&client->dev);
+ return 0;
+}
+
+static const struct i2c_device_id sky81452_ids[] = {
+ { "sky81452" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sky81452_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sky81452_of_match[] = {
+ { .compatible = "skyworks,sky81452", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sky81452_of_match);
+#endif
+
+static struct i2c_driver sky81452_driver = {
+ .driver = {
+ .name = "sky81452",
+ .of_match_table = of_match_ptr(sky81452_of_match),
+ },
+ .probe = sky81452_probe,
+ .remove = sky81452_remove,
+ .id_table = sky81452_ids,
+};
+
+module_i2c_driver(sky81452_driver);
+
+MODULE_DESCRIPTION("Skyworks SKY81452 MFD driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
new file mode 100644
index 0000000..b0925fa
--- /dev/null
+++ b/include/linux/mfd/sky81452.h
@@ -0,0 +1,31 @@
+/*
+ * sky81452.h SKY81452 MFD driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_H
+#define _SKY81452_H
+
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/regulator/machine.h>
+
+struct sky81452_platform_data {
+ struct sky81452_bl_platform_data *bl_pdata;
+ struct regulator_init_data *regulator_init_data;
+};
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-1-git-send-email-jack.yoo@skyworksinc.com>
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Removed trivial get_brightness implementations
Changes v9:
Nothing
Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Changes v7:
Modified licensing text to GPLv2
Changes v6:
Added new line character at the end of line of dev_err()
Changes v5:
Move sky81452-backlight.h to include/linux/platform_data
Changes v4:
Reordering header files for readability
Removed calling to backlight_device_unregister()
Removed MODULE_VERSION()
Modified license to GPLv2
Changes v3:
Modified DBG messages
Changes v2:
Added 'compatible' attribute in the driver
Added message for exception or errors
drivers/video/backlight/Kconfig | 10 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/sky81452-backlight.c | 334 +++++++++++++++++++++++
include/linux/platform_data/sky81452-backlight.h | 46 ++++
4 files changed, 391 insertions(+)
create mode 100644 drivers/video/backlight/sky81452-backlight.c
create mode 100644 include/linux/platform_data/sky81452-backlight.h
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 8d03924..2586fdd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA
If you have a Pandora console, say Y to enable the
backlight driver.
+config BACKLIGHT_SKY81452
+ tristate "Backlight driver for SKY81452"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
+ help
+ If you have a Skyworks SKY81452, say Y to enable the
+ backlight driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called sky81452-backlight
+
config BACKLIGHT_TPS65217
tristate "TPS65217 Backlight"
depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fcd50b73..d67073f 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
new file mode 100644
index 0000000..8105597
--- /dev/null
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -0,0 +1,334 @@
+/*
+ * sky81452-backlight.c SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/sky81452-backlight.h>
+#include <linux/slab.h>
+
+/* registers */
+#define SKY81452_REG0 0x00
+#define SKY81452_REG1 0x01
+#define SKY81452_REG2 0x02
+#define SKY81452_REG4 0x04
+#define SKY81452_REG5 0x05
+
+/* bit mask */
+#define SKY81452_CS 0xFF
+#define SKY81452_EN 0x3F
+#define SKY81452_IGPW 0x20
+#define SKY81452_PWMMD 0x10
+#define SKY81452_PHASE 0x08
+#define SKY81452_ILIM 0x04
+#define SKY81452_VSHRT 0x03
+#define SKY81452_OCP 0x80
+#define SKY81452_OTMP 0x40
+#define SKY81452_SHRT 0x3F
+#define SKY81452_OPN 0x3F
+
+#define SKY81452_DEFAULT_NAME "lcd-backlight"
+#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1)
+
+#define CTZ(b) __builtin_ctz(b)
+
+static int sky81452_bl_update_status(struct backlight_device *bd)
+{
+ const struct sky81452_bl_platform_data *pdata + dev_get_platdata(bd->dev.parent);
+ const unsigned int brightness = (unsigned int)bd->props.brightness;
+ struct regmap *regmap = bl_get_data(bd);
+ int ret;
+
+ if (brightness > 0) {
+ ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
+ pdata->enable << CTZ(SKY81452_EN));
+ }
+
+ return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
+}
+
+static const struct backlight_ops sky81452_bl_ops = {
+ .update_status = sky81452_bl_update_status,
+};
+
+static ssize_t sky81452_bl_store_enable(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+ unsigned long value;
+ int ret;
+
+ ret = kstrtoul(buf, 16, &value);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
+ value << CTZ(SKY81452_EN));
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ return count;
+}
+
+static ssize_t sky81452_bl_show_open_short(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+ unsigned int reg, value = 0;
+ char tmp[3];
+ int i, ret;
+
+ reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
+ ret = regmap_read(regmap, reg, &value);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ if (value & SKY81452_SHRT) {
+ *buf = 0;
+ for (i = 0; i < 6; i++) {
+ if (value & 0x01) {
+ sprintf(tmp, "%d ", i + 1);
+ strcat(buf, tmp);
+ }
+ value >>= 1;
+ }
+ strcat(buf, "\n");
+ } else {
+ strcpy(buf, "none\n");
+ }
+
+ return strlen(buf);
+}
+
+static ssize_t sky81452_bl_show_fault(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regmap *regmap = bl_get_data(to_backlight_device(dev));
+ unsigned int value = 0;
+ int ret;
+
+ ret = regmap_read(regmap, SKY81452_REG4, &value);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ *buf = 0;
+
+ if (value & SKY81452_OCP)
+ strcat(buf, "over-current ");
+
+ if (value & SKY81452_OTMP)
+ strcat(buf, "over-temperature");
+
+ strcat(buf, "\n");
+ return strlen(buf);
+}
+
+static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
+static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
+static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
+static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
+
+static struct attribute *sky81452_bl_attribute[] = {
+ &dev_attr_enable.attr,
+ &dev_attr_open.attr,
+ &dev_attr_short.attr,
+ &dev_attr_fault.attr,
+ NULL
+};
+
+static const struct attribute_group sky81452_bl_attr_group = {
+ .attrs = sky81452_bl_attribute,
+};
+
+#ifdef CONFIG_OF
+static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
+ struct device *dev)
+{
+ struct device_node *np = of_node_get(dev->of_node);
+ struct sky81452_bl_platform_data *pdata;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "backlight node not found.\n");
+ return ERR_PTR(-ENODATA);
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ of_node_put(np);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ of_property_read_string(np, "name", &pdata->name);
+ pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
+ pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
+ pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
+ pdata->gpio_enable = of_get_gpio(np, 0);
+
+ ret = of_property_read_u32(np, "skyworks,en-channels", &pdata->enable);
+ if (IS_ERR_VALUE(ret))
+ pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
+
+ ret = of_property_read_u32(np, "skyworks,short-detection-threshold",
+ &pdata->short_detection_threshold);
+ if (IS_ERR_VALUE(ret))
+ pdata->short_detection_threshold = 7;
+
+ ret = of_property_read_u32(np, "skyworks,current-limit",
+ &pdata->boost_current_limit);
+ if (IS_ERR_VALUE(ret))
+ pdata->boost_current_limit = 2750;
+
+ of_node_put(np);
+ return pdata;
+}
+#else
+static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
+ struct device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int sky81452_bl_init_device(struct regmap *regmap,
+ struct sky81452_bl_platform_data *pdata)
+{
+ unsigned int value;
+
+ value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
+ value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
+ value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
+
+ if (pdata->boost_current_limit = 2300)
+ value |= SKY81452_ILIM;
+ else if (pdata->boost_current_limit != 2750)
+ return -EINVAL;
+
+ if (pdata->short_detection_threshold < 4 ||
+ pdata->short_detection_threshold > 7)
+ return -EINVAL;
+ value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
+
+ return regmap_write(regmap, SKY81452_REG2, value);
+}
+
+static int sky81452_bl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap = dev_get_drvdata(dev->parent);
+ struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
+ struct backlight_device *bd;
+ struct backlight_properties props;
+ const char *name;
+ int ret;
+
+ if (!pdata) {
+ pdata = sky81452_bl_parse_dt(dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ }
+
+ if (gpio_is_valid(pdata->gpio_enable)) {
+ ret = devm_gpio_request_one(dev, pdata->gpio_enable,
+ GPIOF_OUT_INIT_HIGH, "sky81452-en");
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "failed to request GPIO. err=%d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = sky81452_bl_init_device(regmap, pdata);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "failed to initialize. err=%d\n", ret);
+ return ret;
+ }
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = SKY81452_MAX_BRIGHTNESS,
+ name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
+ bd = devm_backlight_device_register(dev, name, dev, regmap,
+ &sky81452_bl_ops, &props);
+ if (IS_ERR(bd)) {
+ dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
+ return PTR_ERR(bd);
+ }
+
+ platform_set_drvdata(pdev, bd);
+
+ ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "failed to create attribute. err=%d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sky81452_bl_remove(struct platform_device *pdev)
+{
+ const struct sky81452_bl_platform_data *pdata + dev_get_platdata(&pdev->dev);
+ struct backlight_device *bd = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+
+ bd->props.power = FB_BLANK_UNBLANK;
+ bd->props.brightness = 0;
+ backlight_update_status(bd);
+
+ if (gpio_is_valid(pdata->gpio_enable))
+ gpio_set_value_cansleep(pdata->gpio_enable, 0);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sky81452_bl_of_match[] = {
+ { .compatible = "skyworks,sky81452-backlight", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
+#endif
+
+static struct platform_driver sky81452_bl_driver = {
+ .driver = {
+ .name = "sky81452-backlight",
+ .of_match_table = of_match_ptr(sky81452_bl_of_match),
+ },
+ .probe = sky81452_bl_probe,
+ .remove = sky81452_bl_remove,
+};
+
+module_platform_driver(sky81452_bl_driver);
+
+MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
+MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
new file mode 100644
index 0000000..1231e9b
--- /dev/null
+++ b/include/linux/platform_data/sky81452-backlight.h
@@ -0,0 +1,46 @@
+/*
+ * sky81452.h SKY81452 backlight driver
+ *
+ * Copyright 2014 Skyworks Solutions Inc.
+ * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SKY81452_BACKLIGHT_H
+#define _SKY81452_BACKLIGHT_H
+
+/**
+ * struct sky81452_platform_data
+ * @name: backlight driver name.
+ If it is not defined, default name is lcd-backlight.
+ * @gpio_enable:GPIO number which control EN pin
+ * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
+ * @ignore_pwm: true if DPWMI should be ignored.
+ * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode.
+ * @phase_shift:true is phase shift mode.
+ * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V.
+ * @boost_current_limit: It should be one of 2300, 2750mA.
+ */
+struct sky81452_bl_platform_data {
+ const char *name;
+ int gpio_enable;
+ unsigned int enable;
+ bool ignore_pwm;
+ bool dpwm_mode;
+ bool phase_shift;
+ unsigned int short_detection_threshold;
+ unsigned int boost_current_limit;
+};
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v10 3/6] devicetree: mfd: Add new SKY81452 mfd binding
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-1-git-send-email-jack.yoo@skyworksinc.com>
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing
Changes v9:
Nothing
Changes v8:
Made up the example for backlight DT
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Changed DT for regulator : 'lout' node should be defined under 'regulator'
Removed compatible string from sky81452-regulator driver
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added reg attribute for I2C slave address
Documentation/devicetree/bindings/mfd/sky81452.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 0000000..ab71473
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,36 @@
+SKY81452 bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452"
+- reg : I2C slave address
+
+Required child nodes:
+- backlight : container node for backlight following the binding
+ in video/backlight/sky81452-backlight.txt
+- regulator : container node for regulators following the binding
+ in regulator/sky81452-regulator.txt
+
+Example:
+
+ sky81452@2c {
+ compatible = "skyworks,sky81452";
+ reg = <0x2c>;
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ skyworks,en-channels = <0x3f>;
+ skyworks,ignore-pwm;
+ skyworks,phase-shift;
+ skyworks,ovp-level = <20>;
+ skyworks,current-limit = <2300>;
+ };
+
+ regulator {
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
+ };
+ };
--
1.9.1
^ permalink raw reply related
* [PATCH v10 4/6] devicetree: backlight: Add new SKY81452 backlight binding
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-1-git-send-email-jack.yoo@skyworksinc.com>
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
---
Changes v10:
Nothing
Changes v9:
Nothing
Changes v8:
Renamed property names for backlight with vendor prefix
Modified gpio-enable property to generic property for GPIO
Made up the example for backlight DT
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added reg attribute for I2C slave address
.../video/backlight/sky81452-backlight.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
diff --git a/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
new file mode 100644
index 0000000..8daebf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
@@ -0,0 +1,29 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name : Name of backlight device. Default is 'lcd-backlight'.
+- gpios : GPIO to use to EN pin.
+ See Documentation/devicetree/bindings/gpio/gpio.txt
+- skyworks,en-channels : Enable mask for current sink channel 1 to 6.
+- skyworks,ignore-pwm : Ignore both PWM input
+- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming.
+- skyworks,phase-shift : Enable phase shift mode
+- skyworks,ovp-level : Over-voltage protection level.
+ Should be between 14 or 28V.
+- skyworks,short-detection-threshold : It should be one of 4, 5, 6 and 7V.
+- skyworks,current-limit : It should be 2300mA or 2750mA.
+
+Example:
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ skyworks,en-channels = <0x3f>;
+ skyworks,ignore-pwm;
+ skyworks,phase-shift;
+ skyworks,ovp-level = <20>;
+ skyworks,current-limit = <2300>;
+ };
--
1.9.1
^ permalink raw reply related
* [PATCH v10 5/6] devicetree: Add vendor prefix for Skyworks Solutions, Inc.
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-1-git-send-email-jack.yoo@skyworksinc.com>
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing
Changes v9:
Nothing
Changes v8:
Nothing
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Added vendor prefix for Skyworks Solutions, Inc.
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a344ec2..68143f0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -140,6 +140,7 @@ sii Seiko Instruments, Inc.
silergy Silergy Corp.
sirf SiRF Technology, Inc.
sitronix Sitronix Technology Corporation
+skyworks Skyworks Solutions, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
--
1.9.1
^ permalink raw reply related
* [PATCH v10 6/6] devicetree: i2c: Add SKY81452 to the Trivial Devices list
From: gyungoh @ 2014-12-03 7:05 UTC (permalink / raw)
To: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-1-git-send-email-jack.yoo@skyworksinc.com>
From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
---
Changes v10:
Nothing
Changes v9:
Nothing
Changes v8:
Nothing
Changes v7:
Nothing
Changes v6:
Nothing
Changes v5:
Nothing
Changes v4:
Nothing
Changes v3:
Nothing
Changes v2:
Add SKY81452 to the Trivial Devices list
Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index fbde415..122fa1e 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -77,6 +77,7 @@ ramtron,24c64 i2c serial eeprom (24cxx)
ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
sii,s35390a 2-wire CMOS real-time clock
+skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
st-micro,24c256 i2c serial eeprom (24cxx)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
--
1.9.1
^ permalink raw reply related
* Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
From: Jingoo Han @ 2014-12-03 7:13 UTC (permalink / raw)
To: gyungoh, sameo, lee.jones, grant.likely, robh+dt, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial
Cc: akpm, jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree,
'Jingoo Han'
In-Reply-To: <1417590332-4912-3-git-send-email-jack.yoo@skyworksinc.com>
On Wednesday, December 03, 2014 4:05 PM, Gyungoh Yoo wrote:
>
> From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
>
> Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Best regards,
Jingoo Han
> ---
> Changes v10:
> Removed trivial get_brightness implementations
>
> Changes v9:
> Nothing
>
> Changes v8:
> Renamed property names for backlight with vendor prefix
> Modified gpio-enable property to generic property for GPIO
>
> Changes v7:
> Modified licensing text to GPLv2
>
> Changes v6:
> Added new line character at the end of line of dev_err()
>
> Changes v5:
> Move sky81452-backlight.h to include/linux/platform_data
>
> Changes v4:
> Reordering header files for readability
> Removed calling to backlight_device_unregister()
> Removed MODULE_VERSION()
> Modified license to GPLv2
>
> Changes v3:
> Modified DBG messages
>
> Changes v2:
> Added 'compatible' attribute in the driver
> Added message for exception or errors
>
> drivers/video/backlight/Kconfig | 10 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/sky81452-backlight.c | 334 +++++++++++++++++++++++
> include/linux/platform_data/sky81452-backlight.h | 46 ++++
> 4 files changed, 391 insertions(+)
> create mode 100644 drivers/video/backlight/sky81452-backlight.c
> create mode 100644 include/linux/platform_data/sky81452-backlight.h
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 8d03924..2586fdd 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -409,6 +409,16 @@ config BACKLIGHT_PANDORA
> If you have a Pandora console, say Y to enable the
> backlight driver.
>
> +config BACKLIGHT_SKY81452
> + tristate "Backlight driver for SKY81452"
> + depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
> + help
> + If you have a Skyworks SKY81452, say Y to enable the
> + backlight driver.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called sky81452-backlight
> +
> config BACKLIGHT_TPS65217
> tristate "TPS65217 Backlight"
> depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index fcd50b73..d67073f 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -50,6 +50,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
> obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
> obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
> obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
> +obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
> obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
> obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
> obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
> diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-
> backlight.c
> new file mode 100644
> index 0000000..8105597
> --- /dev/null
> +++ b/drivers/video/backlight/sky81452-backlight.c
> @@ -0,0 +1,334 @@
> +/*
> + * sky81452-backlight.c SKY81452 backlight driver
> + *
> + * Copyright 2014 Skyworks Solutions Inc.
> + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_data/sky81452-backlight.h>
> +#include <linux/slab.h>
> +
> +/* registers */
> +#define SKY81452_REG0 0x00
> +#define SKY81452_REG1 0x01
> +#define SKY81452_REG2 0x02
> +#define SKY81452_REG4 0x04
> +#define SKY81452_REG5 0x05
> +
> +/* bit mask */
> +#define SKY81452_CS 0xFF
> +#define SKY81452_EN 0x3F
> +#define SKY81452_IGPW 0x20
> +#define SKY81452_PWMMD 0x10
> +#define SKY81452_PHASE 0x08
> +#define SKY81452_ILIM 0x04
> +#define SKY81452_VSHRT 0x03
> +#define SKY81452_OCP 0x80
> +#define SKY81452_OTMP 0x40
> +#define SKY81452_SHRT 0x3F
> +#define SKY81452_OPN 0x3F
> +
> +#define SKY81452_DEFAULT_NAME "lcd-backlight"
> +#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1)
> +
> +#define CTZ(b) __builtin_ctz(b)
> +
> +static int sky81452_bl_update_status(struct backlight_device *bd)
> +{
> + const struct sky81452_bl_platform_data *pdata > + dev_get_platdata(bd->dev.parent);
> + const unsigned int brightness = (unsigned int)bd->props.brightness;
> + struct regmap *regmap = bl_get_data(bd);
> + int ret;
> +
> + if (brightness > 0) {
> + ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> + pdata->enable << CTZ(SKY81452_EN));
> + }
> +
> + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
> +}
> +
> +static const struct backlight_ops sky81452_bl_ops = {
> + .update_status = sky81452_bl_update_status,
> +};
> +
> +static ssize_t sky81452_bl_store_enable(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> + unsigned long value;
> + int ret;
> +
> + ret = kstrtoul(buf, 16, &value);
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> + value << CTZ(SKY81452_EN));
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + return count;
> +}
> +
> +static ssize_t sky81452_bl_show_open_short(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> + unsigned int reg, value = 0;
> + char tmp[3];
> + int i, ret;
> +
> + reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
> + ret = regmap_read(regmap, reg, &value);
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + if (value & SKY81452_SHRT) {
> + *buf = 0;
> + for (i = 0; i < 6; i++) {
> + if (value & 0x01) {
> + sprintf(tmp, "%d ", i + 1);
> + strcat(buf, tmp);
> + }
> + value >>= 1;
> + }
> + strcat(buf, "\n");
> + } else {
> + strcpy(buf, "none\n");
> + }
> +
> + return strlen(buf);
> +}
> +
> +static ssize_t sky81452_bl_show_fault(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> + unsigned int value = 0;
> + int ret;
> +
> + ret = regmap_read(regmap, SKY81452_REG4, &value);
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + *buf = 0;
> +
> + if (value & SKY81452_OCP)
> + strcat(buf, "over-current ");
> +
> + if (value & SKY81452_OTMP)
> + strcat(buf, "over-temperature");
> +
> + strcat(buf, "\n");
> + return strlen(buf);
> +}
> +
> +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
> +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
> +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
> +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
> +
> +static struct attribute *sky81452_bl_attribute[] = {
> + &dev_attr_enable.attr,
> + &dev_attr_open.attr,
> + &dev_attr_short.attr,
> + &dev_attr_fault.attr,
> + NULL
> +};
> +
> +static const struct attribute_group sky81452_bl_attr_group = {
> + .attrs = sky81452_bl_attribute,
> +};
> +
> +#ifdef CONFIG_OF
> +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
> + struct device *dev)
> +{
> + struct device_node *np = of_node_get(dev->of_node);
> + struct sky81452_bl_platform_data *pdata;
> + int ret;
> +
> + if (!np) {
> + dev_err(dev, "backlight node not found.\n");
> + return ERR_PTR(-ENODATA);
> + }
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata) {
> + of_node_put(np);
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + of_property_read_string(np, "name", &pdata->name);
> + pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
> + pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
> + pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
> + pdata->gpio_enable = of_get_gpio(np, 0);
> +
> + ret = of_property_read_u32(np, "skyworks,en-channels", &pdata->enable);
> + if (IS_ERR_VALUE(ret))
> + pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
> +
> + ret = of_property_read_u32(np, "skyworks,short-detection-threshold",
> + &pdata->short_detection_threshold);
> + if (IS_ERR_VALUE(ret))
> + pdata->short_detection_threshold = 7;
> +
> + ret = of_property_read_u32(np, "skyworks,current-limit",
> + &pdata->boost_current_limit);
> + if (IS_ERR_VALUE(ret))
> + pdata->boost_current_limit = 2750;
> +
> + of_node_put(np);
> + return pdata;
> +}
> +#else
> +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
> + struct device *dev)
> +{
> + return ERR_PTR(-EINVAL);
> +}
> +#endif
> +
> +static int sky81452_bl_init_device(struct regmap *regmap,
> + struct sky81452_bl_platform_data *pdata)
> +{
> + unsigned int value;
> +
> + value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
> + value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
> + value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
> +
> + if (pdata->boost_current_limit = 2300)
> + value |= SKY81452_ILIM;
> + else if (pdata->boost_current_limit != 2750)
> + return -EINVAL;
> +
> + if (pdata->short_detection_threshold < 4 ||
> + pdata->short_detection_threshold > 7)
> + return -EINVAL;
> + value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
> +
> + return regmap_write(regmap, SKY81452_REG2, value);
> +}
> +
> +static int sky81452_bl_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap = dev_get_drvdata(dev->parent);
> + struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
> + struct backlight_device *bd;
> + struct backlight_properties props;
> + const char *name;
> + int ret;
> +
> + if (!pdata) {
> + pdata = sky81452_bl_parse_dt(dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> + }
> +
> + if (gpio_is_valid(pdata->gpio_enable)) {
> + ret = devm_gpio_request_one(dev, pdata->gpio_enable,
> + GPIOF_OUT_INIT_HIGH, "sky81452-en");
> + if (IS_ERR_VALUE(ret)) {
> + dev_err(dev, "failed to request GPIO. err=%d\n", ret);
> + return ret;
> + }
> + }
> +
> + ret = sky81452_bl_init_device(regmap, pdata);
> + if (IS_ERR_VALUE(ret)) {
> + dev_err(dev, "failed to initialize. err=%d\n", ret);
> + return ret;
> + }
> +
> + memset(&props, 0, sizeof(props));
> + props.max_brightness = SKY81452_MAX_BRIGHTNESS,
> + name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
> + bd = devm_backlight_device_register(dev, name, dev, regmap,
> + &sky81452_bl_ops, &props);
> + if (IS_ERR(bd)) {
> + dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
> + return PTR_ERR(bd);
> + }
> +
> + platform_set_drvdata(pdev, bd);
> +
> + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
> + if (IS_ERR_VALUE(ret)) {
> + dev_err(dev, "failed to create attribute. err=%d\n", ret);
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int sky81452_bl_remove(struct platform_device *pdev)
> +{
> + const struct sky81452_bl_platform_data *pdata > + dev_get_platdata(&pdev->dev);
> + struct backlight_device *bd = platform_get_drvdata(pdev);
> +
> + sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
> +
> + bd->props.power = FB_BLANK_UNBLANK;
> + bd->props.brightness = 0;
> + backlight_update_status(bd);
> +
> + if (gpio_is_valid(pdata->gpio_enable))
> + gpio_set_value_cansleep(pdata->gpio_enable, 0);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id sky81452_bl_of_match[] = {
> + { .compatible = "skyworks,sky81452-backlight", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
> +#endif
> +
> +static struct platform_driver sky81452_bl_driver = {
> + .driver = {
> + .name = "sky81452-backlight",
> + .of_match_table = of_match_ptr(sky81452_bl_of_match),
> + },
> + .probe = sky81452_bl_probe,
> + .remove = sky81452_bl_remove,
> +};
> +
> +module_platform_driver(sky81452_bl_driver);
> +
> +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
> +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-
> backlight.h
> new file mode 100644
> index 0000000..1231e9b
> --- /dev/null
> +++ b/include/linux/platform_data/sky81452-backlight.h
> @@ -0,0 +1,46 @@
> +/*
> + * sky81452.h SKY81452 backlight driver
> + *
> + * Copyright 2014 Skyworks Solutions Inc.
> + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _SKY81452_BACKLIGHT_H
> +#define _SKY81452_BACKLIGHT_H
> +
> +/**
> + * struct sky81452_platform_data
> + * @name: backlight driver name.
> + If it is not defined, default name is lcd-backlight.
> + * @gpio_enable:GPIO number which control EN pin
> + * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
> + * @ignore_pwm: true if DPWMI should be ignored.
> + * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode.
> + * @phase_shift:true is phase shift mode.
> + * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V.
> + * @boost_current_limit: It should be one of 2300, 2750mA.
> + */
> +struct sky81452_bl_platform_data {
> + const char *name;
> + int gpio_enable;
> + unsigned int enable;
> + bool ignore_pwm;
> + bool dpwm_mode;
> + bool phase_shift;
> + unsigned int short_detection_threshold;
> + unsigned int boost_current_limit;
> +};
> +
> +#endif
> --
> 1.9.1
^ permalink raw reply
* [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
From: Xiubo Li @ 2014-12-03 9:15 UTC (permalink / raw)
To: linux-arm-kernel
Framebuffer driver for the Freescale SoC Display Controller.
Change in V2:
- Use the native-mode timing as default.
- Add to_fsl_private().
Xiubo Li (4):
video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
video: fsl-dcfb: Add devicetree binding support
ARM: ls1021a: dtsi: Add dt node support for dcfb.
ARM: ls1021a: dts: Add and enable dt node for dcfb.
.../devicetree/bindings/video/fsl,dcfb.txt | 52 ++
arch/arm/boot/dts/ls1021a-twr.dts | 26 +
arch/arm/boot/dts/ls1021a.dtsi | 10 +
drivers/video/fbdev/Kconfig | 19 +
drivers/video/fbdev/Makefile | 1 +
drivers/video/fbdev/fsl-dcfb.c | 814 +++++++++++++++++++++
6 files changed, 922 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/fsl,dcfb.txt
create mode 100644 drivers/video/fbdev/fsl-dcfb.c
--
2.1.0.27.g96db324
^ permalink raw reply
* [PATCHv2 1/4] video: fsl-dcfb: Add dcfb framebuffer driver for LS1021A platform
From: Xiubo Li @ 2014-12-03 9:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1417598162-40433-1-git-send-email-Li.Xiubo@freescale.com>
The Display Controller module is a system master that fetches graphics
stored in internal/external memory and displays them on a TFT LCD panel.
A wide range of panel sizes is supported and the timing of the interface
signals is configurable.
The dcfb has these features:
o Full RGB888 output to TFT LCD panel.
o Optional output to system memory dependent on implementation.
o Supports Programmable panel size upto a maximum of 2032x2047. The actual
resolution supported depends upon the pixel clock and bus bandwidth
available.
o Gamma correction with 8-bit resolution on each color component.
o Dedicated memory blocks to store a cursor and Color Look Up Tables(CLUTs).
o Temporal Dithering.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
drivers/video/fbdev/Kconfig | 19 +
drivers/video/fbdev/Makefile | 1 +
drivers/video/fbdev/fsl-dcfb.c | 814 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 834 insertions(+)
create mode 100644 drivers/video/fbdev/fsl-dcfb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 4916c97..460fe39 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1948,6 +1948,25 @@ config FB_MBX_DEBUG
If unsure, say N.
+config FB_FSL_DCFB
+ tristate "Freescale Display Control Framebuffer Support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select VIDEOMODE_HELPERS
+ select REGMAP_MMIO
+ ---help---
+ Framebuffer driver for the Freescale SoC Display Control.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want).
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/kbuild/modules.txt>.
+
+ If unsure, say N.
+
config FB_FSL_DIU
tristate "Freescale DIU framebuffer support"
depends on FB && FSL_SOC
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 1979aff..9015138 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -109,6 +109,7 @@ obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
+obj-$(CONFIG_FB_FSL_DCFB) += fsl-dcfb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
diff --git a/drivers/video/fbdev/fsl-dcfb.c b/drivers/video/fbdev/fsl-dcfb.c
new file mode 100644
index 0000000..c3843bf
--- /dev/null
+++ b/drivers/video/fbdev/fsl-dcfb.c
@@ -0,0 +1,814 @@
+/*
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
+ *
+ * Freescale Dispaly Controller Framebuffer Driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#define FSL_SCFG_CTRL 0x28
+#define FSL_SCFG_PIXEL_EN BIT(31)
+
+#define FSL_DCFB_MODE 0x10
+#define FSL_DCFB_BGND 0x14
+#define FSL_DCFB_FIX_SIZE 0x18
+#define FSL_DCFB_HSYN 0x1c
+#define FSL_DCFB_VSYN 0x20
+#define FSL_DCFB_SP 0x24
+#define FSL_DCFB_TS 0x28
+#define FSL_DCFB_DIV_RATIO 0x54
+#define FSL_DCFB_UPDATE 0xcc
+#define FSL_DCFB_VAR_SIZE 0x200
+#define FSL_DCFB_POS 0x204
+#define FSL_DCFB_BASE 0x208
+#define FSL_DCFB_CTRL 0x20c
+#define FSL_DCFB_CKMAX 0x210
+#define FSL_DCFB_CKMIN 0x214
+#define FSL_DCFB_FCOLOR 0x21c
+#define FSL_DCFB_BCOLOR 0x220
+#define FSL_DCFB_SKIP 0x224
+#define FSL_DCFB_MAX 0x300
+
+#define FSL_DCFB_HSYN_BP(x) ((x) << 22)
+#define FSL_DCFB_HSYN_PW(x) ((x) << 11)
+#define FSL_DCFB_HSYN_FP(x) (x)
+#define FSL_DCFB_VSYN_BP(x) ((x) << 22)
+#define FSL_DCFB_VSYN_PW(x) ((x) << 11)
+#define FSL_DCFB_VSYN_FP(x) (x)
+
+#define FSL_DCFB_SP_VS BIT(1)
+#define FSL_DCFB_SP_HS BIT(0)
+
+#define FSL_DCFB_TS_LBV(x) ((x) << 16)
+#define FSL_DCFB_TS_OBH(x) ((x) << 8)
+#define FSL_DCFB_TS_OBL(x) (x)
+
+#define FSL_DCFB_UPDATE_MODE BIT(31)
+#define FSL_DCFB_UPDATE_READREG BIT(30)
+
+#define FSL_DCFB_VAR_SIZE_H(x) ((x) << 16)
+#define FSL_DCFB_VAR_SIZE_W(x) (x)
+
+#define FSL_DCFB_POSY(x) ((x) << 16)
+#define FSL_DCFB_POSX(x) (x)
+
+#define FSL_DCFB_CTRL_EN BIT(31)
+#define FSL_DCFB_CTRL_TILE_EN BIT(30)
+#define FSL_DCFB_CTRL_DATA_SEL_CLUT BIT(29)
+#define FSL_DCFB_CTRL_SAFETY_EN BIT(28)
+#define FSL_DCFB_CTRL_TRANS(x) ((x) << 20)
+#define FSL_DCFB_CTRL_BPP(x) ((x) << 16)
+#define FSL_DCFB_CTRL_RLE_EN BIT(15)
+#define FSL_DCFB_CTRL_LUOFFS(x) ((x) << 4)
+#define FSL_DCFB_CTRL_BB_ON BIT(2)
+
+#define FSL_DCFB_CKMAX_R(x) ((x) << 16)
+#define FSL_DCFB_CKMAX_G(x) ((x) << 8)
+#define FSL_DCFB_CKMAX_B(x) (x)
+
+#define FSL_DCFB_CKMIN_R(x) ((x) << 16)
+#define FSL_DCFB_CKMIN_G(x) ((x) << 8)
+#define FSL_DCFB_CKMIN_B(x) (x)
+
+#define FSL_DCFB_TILE_SIZE_W(x) ((x) << 16)
+#define FSL_DCFB_TILE_SIZE_H(x) (x)
+
+#define FSL_DCFB_FCOLOR_OFF(x) (x)
+#define FSL_DCFB_BCOLOR_OFF(x) (x)
+
+#define FSL_DCFB_MODE_BITER(x) ((x) << 20)
+#define FSL_DCFB_MODE_RASTER_EN BIT(14)
+#define FSL_DCFB_MODE_MODE(x) (x)
+#define FSL_DCFB_MODE_MODE_MASK 0x03
+
+#define FSL_DCFB_BGND_R(x) ((x) << 16)
+#define FSL_DCFB_BGND_G(x) ((x) << 8)
+#define FSL_DCFB_BGND_B(x) (x)
+
+#define FSL_DCFB_FIX_SIZE_Y(x) ((x) << 16)
+#define FSL_DCFB_FIX_SIZE_X(x) (x)
+
+enum fsl_dcfb_fmt {
+ FSL_DCFB_RGB565 = 4,
+ FSL_DCFB_RGB888,
+ FSL_DCFB_ARGB8888,
+};
+
+enum fsl_dcfb_mode {
+ FSL_DCFB_MOD_OFF = 0,
+ FSL_DCFB_MOD_NORMAL,
+ FSL_DCFB_MOD_TEST,
+ FSL_DCFB_MOD_COLORBAR,
+};
+
+struct fsl_dcfb_fb_private {
+ struct fb_info *fsl_dcfb_info;
+ struct device *dev;
+ struct regmap *regmap;
+ struct clk *clk;
+};
+
+struct fsl_dcfb_fb_info {
+ unsigned long pseudo_palette[16];
+ unsigned int count;
+ struct fsl_dcfb_fb_private *parent;
+};
+
+static inline struct fsl_dcfb_fb_private *to_fsl_private(struct fb_info *info)
+{
+ struct fsl_dcfb_fb_info *fsl_info = info->par;
+
+ return (struct fsl_dcfb_fb_private *)fsl_info->parent;
+}
+
+static int fsl_dcfb_get_bpp(unsigned int bits_per_pixel)
+{
+ int bpp;
+
+ switch (bits_per_pixel) {
+ case 16:
+ bpp = FSL_DCFB_RGB565;
+ break;
+ case 24:
+ bpp = FSL_DCFB_RGB888;
+ break;
+ case 32:
+ bpp = FSL_DCFB_ARGB8888;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return bpp;
+}
+
+static int fsl_dcfb_set_panel(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+ int bpp;
+
+ regmap_write(dcfb->regmap, FSL_DCFB_VAR_SIZE,
+ FSL_DCFB_VAR_SIZE_H(var->yres) |
+ FSL_DCFB_VAR_SIZE_W(var->xres));
+ regmap_write(dcfb->regmap, FSL_DCFB_POS,
+ FSL_DCFB_POSY(0) | FSL_DCFB_POSX(0));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_BASE, info->fix.smem_start);
+
+ bpp = fsl_dcfb_get_bpp(var->bits_per_pixel);
+ if (bpp < 0) {
+ dev_err(dcfb->dev, "unsupported color depth: %u\n",
+ var->bits_per_pixel);
+ return bpp;
+ }
+
+ regmap_write(dcfb->regmap, FSL_DCFB_CTRL, FSL_DCFB_CTRL_EN |
+ FSL_DCFB_CTRL_TRANS(0xFF) | FSL_DCFB_CTRL_BPP(bpp));
+ regmap_write(dcfb->regmap, FSL_DCFB_CKMAX, FSL_DCFB_CKMAX_R(0xFF) |
+ FSL_DCFB_CKMAX_G(0xFF) | FSL_DCFB_CKMAX_B(0xFF));
+ regmap_write(dcfb->regmap, FSL_DCFB_CKMIN, FSL_DCFB_CKMIN_R(0) |
+ FSL_DCFB_CKMIN_G(0) | FSL_DCFB_CKMIN_B(0));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_FCOLOR, FSL_DCFB_FCOLOR_OFF(0));
+ regmap_write(dcfb->regmap, FSL_DCFB_BCOLOR, FSL_DCFB_BCOLOR_OFF(0));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_UPDATE, FSL_DCFB_UPDATE_READREG);
+
+ return 0;
+}
+
+static int fsl_dcfb_reset_panel(struct fsl_dcfb_fb_private *dcfb)
+{
+ regmap_write(dcfb->regmap, FSL_DCFB_VAR_SIZE, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_POS, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_BASE, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_CTRL, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_CKMAX, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_CKMIN, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_FCOLOR, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_BCOLOR, 0x0);
+ regmap_write(dcfb->regmap, FSL_DCFB_SKIP, 0x0);
+
+ regmap_write(dcfb->regmap, FSL_DCFB_UPDATE, FSL_DCFB_UPDATE_READREG);
+
+ return 0;
+}
+
+static void fsl_dcfb_modeset(struct fsl_dcfb_fb_private *dcfb,
+ enum fsl_dcfb_mode mode)
+{
+ regmap_update_bits(dcfb->regmap, FSL_DCFB_MODE,
+ FSL_DCFB_MODE_MODE_MASK,
+ FSL_DCFB_MODE_MODE(mode));
+}
+
+static int fsl_dcfb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ if (var->xoffset + info->var.xres > info->var.xres_virtual)
+ var->xoffset = info->var.xres_virtual - info->var.xres;
+
+ if (var->yoffset + info->var.yres > info->var.yres_virtual)
+ var->yoffset = info->var.yres_virtual - info->var.yres;
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->red.length = 5;
+ var->red.offset = 11;
+ var->red.msb_right = 0;
+
+ var->green.length = 6;
+ var->green.offset = 5;
+ var->green.msb_right = 0;
+
+ var->blue.length = 5;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 24:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 0;
+ var->transp.offset = 0;
+ var->transp.msb_right = 0;
+ break;
+ case 32:
+ var->red.length = 8;
+ var->red.offset = 16;
+ var->red.msb_right = 0;
+
+ var->green.length = 8;
+ var->green.offset = 8;
+ var->green.msb_right = 0;
+
+ var->blue.length = 8;
+ var->blue.offset = 0;
+ var->blue.msb_right = 0;
+
+ var->transp.length = 8;
+ var->transp.offset = 24;
+ var->transp.msb_right = 0;
+ break;
+ default:
+ dev_err(dcfb->dev, "unsupported color depth: %u\n",
+ var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int fsl_dcfb_alloc_mem(struct fb_info *info)
+{
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+ u32 smem_len = info->fix.line_length * info->var.yres_virtual;
+
+ info->fix.smem_len = smem_len;
+
+ info->screen_base = dma_alloc_writecombine(info->device,
+ info->fix.smem_len, (dma_addr_t *)&info->fix.smem_start,
+ GFP_KERNEL);
+ if (!info->screen_base) {
+ dev_err(dcfb->dev, "unable to allocate fb memory\n");
+ return -ENOMEM;
+ }
+
+ memset(info->screen_base, 0, info->fix.smem_len);
+
+ return 0;
+}
+
+static void fsl_dcfb_free_mem(struct fb_info *info)
+{
+ if (!info->screen_base)
+ return;
+
+ dma_free_writecombine(info->device, info->fix.smem_len,
+ info->screen_base, info->fix.smem_start);
+
+ info->screen_base = NULL;
+ info->fix.smem_start = 0;
+ info->fix.smem_len = 0;
+}
+
+static int fsl_dcfb_set_par(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct fb_fix_screeninfo *fix = &info->fix;
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+ unsigned int div, len;
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = fix->ypanstep = 1;
+
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ len = info->var.yres_virtual * info->fix.line_length;
+ if (len != info->fix.smem_len) {
+ if (info->fix.smem_start)
+ fsl_dcfb_free_mem(info);
+
+ if (fsl_dcfb_alloc_mem(info)) {
+ dev_err(dcfb->dev, "unable to allocate FB memory\n");
+ return -ENOMEM;
+ }
+ }
+
+ div = KHZ2PICOS(clk_get_rate(dcfb->clk) / 1000);
+ regmap_write(dcfb->regmap, FSL_DCFB_DIV_RATIO,
+ info->var.pixclock / div);
+
+ regmap_write(dcfb->regmap, FSL_DCFB_FIX_SIZE,
+ FSL_DCFB_FIX_SIZE_Y(var->yres) |
+ FSL_DCFB_FIX_SIZE_X(var->xres / 16));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_HSYN,
+ FSL_DCFB_HSYN_BP(var->left_margin) |
+ FSL_DCFB_HSYN_PW(var->hsync_len) |
+ FSL_DCFB_HSYN_FP(var->right_margin));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_VSYN,
+ FSL_DCFB_VSYN_BP(var->upper_margin) |
+ FSL_DCFB_VSYN_PW(var->vsync_len) |
+ FSL_DCFB_VSYN_FP(var->lower_margin));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_SP,
+ FSL_DCFB_SP_VS | FSL_DCFB_SP_HS);
+
+ regmap_write(dcfb->regmap, FSL_DCFB_BGND, FSL_DCFB_BGND_R(0) |
+ FSL_DCFB_BGND_G(0) | FSL_DCFB_BGND_B(0));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_MODE,
+ FSL_DCFB_MODE_BITER(1) | FSL_DCFB_MODE_RASTER_EN);
+
+ regmap_write(dcfb->regmap, FSL_DCFB_TS, FSL_DCFB_TS_LBV(0x03) |
+ FSL_DCFB_TS_OBH(0x78) | FSL_DCFB_TS_OBL(0x0A));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_UPDATE, FSL_DCFB_UPDATE_READREG);
+
+ fsl_dcfb_modeset(dcfb, FSL_DCFB_MOD_NORMAL);
+ fsl_dcfb_set_panel(info);
+
+ return 0;
+}
+
+#define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
+static int fsl_dcfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ int ret = 1;
+
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (info->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ if (regno < 16) {
+ u32 *pal = info->pseudo_palette;
+ u32 value;
+
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+
+ value = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ pal[regno] = value;
+ ret = 0;
+ }
+ break;
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+
+ return ret;
+}
+#undef CNVT_TOHW
+
+static int fsl_dcfb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+ unsigned long addr;
+ int offset;
+
+ if ((info->var.xoffset = var->xoffset) &&
+ (info->var.yoffset = var->yoffset))
+ return 0;
+
+ if ((var->xoffset + info->var.xres) > info->var.xres_virtual
+ || (var->yoffset + info->var.yres) > info->var.yres_virtual)
+ return -EINVAL;
+
+ info->var.xoffset = var->xoffset;
+ info->var.yoffset = var->yoffset;
+
+ if (var->vmode & FB_VMODE_YWRAP)
+ info->var.vmode |= FB_VMODE_YWRAP;
+ else
+ info->var.vmode &= ~FB_VMODE_YWRAP;
+
+ offset = (info->var.yoffset * info->var.xres_virtual);
+ offset += info->var.xoffset;
+ addr = info->fix.smem_start +
+ (offset * (info->var.bits_per_pixel >> 3));
+
+ regmap_write(dcfb->regmap, FSL_DCFB_BASE, addr);
+ regmap_write(dcfb->regmap, FSL_DCFB_UPDATE, FSL_DCFB_UPDATE_READREG);
+
+ return 0;
+}
+
+static int fsl_dcfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+
+ switch (blank_mode) {
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ fsl_dcfb_reset_panel(dcfb);
+ break;
+ case FB_BLANK_POWERDOWN:
+ fsl_dcfb_modeset(dcfb, FSL_DCFB_MOD_OFF);
+ break;
+ case FB_BLANK_UNBLANK:
+ fsl_dcfb_set_panel(info);
+ break;
+ }
+
+ return 0;
+}
+
+static int fsl_dcfb_open(struct fb_info *info, int user)
+{
+ struct fsl_dcfb_fb_info *fsl_info = info->par;
+ int ret = 0;
+
+ fsl_info->count++;
+ if (fsl_info->count = 1) {
+ fsl_dcfb_check_var(&info->var, info);
+ ret = fsl_dcfb_set_par(info);
+ if (ret < 0)
+ fsl_info->count--;
+ }
+
+ return ret;
+}
+
+static int fsl_dcfb_release(struct fb_info *info, int user)
+{
+ struct fsl_dcfb_fb_info *fsl_info = info->par;
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+ int ret = 0;
+
+ fsl_info->count--;
+ if (fsl_info->count = 0)
+ ret = fsl_dcfb_reset_panel(dcfb);
+
+ return ret;
+}
+
+static struct fb_ops fsl_dcfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = fsl_dcfb_check_var,
+ .fb_set_par = fsl_dcfb_set_par,
+ .fb_setcolreg = fsl_dcfb_setcolreg,
+ .fb_blank = fsl_dcfb_blank,
+ .fb_pan_display = fsl_dcfb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_open = fsl_dcfb_open,
+ .fb_release = fsl_dcfb_release,
+};
+
+static int fsl_dcfb_init_fbinfo(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct fsl_dcfb_fb_private *dcfb = to_fsl_private(info);
+ struct device_node *np = dcfb->dev->of_node;
+ struct device_node *dnp, *tnp;
+ struct display_timings *timings;
+ struct fb_videomode fb_vm;
+ int i, ret;
+
+ INIT_LIST_HEAD(&info->modelist);
+
+ dnp = of_parse_phandle(np, "display", 0);
+ if (!dnp) {
+ dev_err(dcfb->dev, "failed to find \"display\" phandle.\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(dnp, "bits-per-pixel",
+ &var->bits_per_pixel);
+ if (ret < 0) {
+ dev_err(dcfb->dev, "failed to get \"bits-per-pixel\" property.\n");
+ goto put_dnp;
+ }
+
+ timings = of_get_display_timings(dnp);
+ if (!timings) {
+ dev_err(dcfb->dev, "failed to get display timings\n");
+ return -ENODEV;
+ goto put_dnp;
+ }
+
+ tnp = of_find_node_by_name(dnp, "display-timings");
+ if (!tnp) {
+ dev_err(dcfb->dev, "failed to find \"display-timings\" node\n");
+ return -ENODEV;
+ goto put_dnp;
+ }
+
+ for (i = 0; i < of_get_child_count(tnp); i++) {
+ struct videomode vm;
+
+ ret = videomode_from_timings(timings, &vm, i);
+ if (ret < 0)
+ goto put_tnp;
+
+ ret = fb_videomode_from_videomode(&vm, &fb_vm);
+ if (ret < 0)
+ goto put_tnp;
+
+ fb_add_videomode(&fb_vm, &info->modelist);
+ }
+
+ ret = of_get_fb_videomode(dnp, &fb_vm, OF_USE_NATIVE_MODE);
+ if (ret)
+ goto put_dnp;
+
+ fb_videomode_to_var(&info->var, &fb_vm);
+ ret = fsl_dcfb_check_var(&info->var, info);
+
+put_tnp:
+ of_node_put(tnp);
+put_dnp:
+ of_node_put(dnp);
+
+ return ret;
+}
+
+static const struct regmap_config fsl_scfg_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = FSL_SCFG_CTRL,
+};
+
+static int scfg_config(struct fsl_dcfb_fb_private *dcfb, struct device_node *np)
+{
+ struct device_node *snp;
+ struct platform_device *pdev;
+ struct resource *res;
+ void __iomem *base;
+ struct regmap *regmap;
+ int ret = 0;
+
+ snp = of_parse_phandle(np, "scfg-controller", 0);
+ if (!snp)
+ return -ENODEV;
+
+ pdev = of_find_device_by_node(snp);
+ if (!pdev) {
+ ret = -ENODEV;
+ goto put_snp;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto put_snp;
+ }
+
+ base = ioremap(res->start, SZ_4K);
+ if (IS_ERR(base)) {
+ dev_err(&pdev->dev, "could not ioremap scfg resource\n");
+ ret = PTR_ERR(base);
+ goto put_snp;
+ }
+
+ regmap = regmap_init_mmio(&pdev->dev, base,
+ &fsl_scfg_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&pdev->dev, "regmap init failed\n");
+ ret = PTR_ERR(regmap);
+ goto ioremap;
+ }
+
+ regmap_write(regmap, FSL_SCFG_CTRL, FSL_SCFG_PIXEL_EN);
+
+ regmap_exit(regmap);
+ioremap:
+ iounmap(base);
+put_snp:
+ of_node_put(snp);
+
+ return ret;
+}
+
+static int fsl_dcfb_dev_init(struct device_node *np,
+ struct fsl_dcfb_fb_private *dcfb)
+{
+ int ret;
+
+ ret = scfg_config(dcfb, np);
+ if (ret) {
+ dev_err(dcfb->dev, "could not config scfg\n");
+ return -EINVAL;
+ }
+
+ return fsl_dcfb_reset_panel(dcfb);
+}
+
+static const struct regmap_config fsl_dcfb_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = FSL_DCFB_MAX,
+};
+
+static int fsl_dcfb_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct fsl_dcfb_fb_private *dcfb;
+ struct fsl_dcfb_fb_info *fsl_info;
+ struct fb_info *info;
+ struct resource *res;
+ void __iomem *base;
+ int ret = 0;
+
+ dcfb = devm_kzalloc(&pdev->dev,
+ sizeof(struct fsl_dcfb_fb_private), GFP_KERNEL);
+ if (!dcfb)
+ return -ENOMEM;
+
+ dcfb->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "could not get memory IO resource\n");
+ return -ENODEV;
+ }
+
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base)) {
+ dev_err(&pdev->dev, "could not ioremap resource\n");
+ return PTR_ERR(base);
+ }
+
+ dcfb->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+ NULL, base, &fsl_dcfb_regmap_config);
+ if (IS_ERR(dcfb->regmap)) {
+ dev_err(&pdev->dev, "regmap init failed\n");
+ return PTR_ERR(dcfb->regmap);
+ }
+
+ dcfb->clk = devm_clk_get(&pdev->dev, "dcfb");
+ if (IS_ERR(dcfb->clk)) {
+ ret = PTR_ERR(dcfb->clk);
+ dev_err(&pdev->dev, "could not get clock\n");
+ return -EINVAL;
+ }
+ clk_prepare_enable(dcfb->clk);
+
+ fsl_dcfb_dev_init(np, dcfb);
+
+ dcfb->fsl_dcfb_info + framebuffer_alloc(sizeof(struct fsl_dcfb_fb_info), &pdev->dev);
+ if (!dcfb->fsl_dcfb_info) {
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+
+ dcfb->fsl_dcfb_info->fix.smem_start = 0;
+
+ fsl_info = dcfb->fsl_dcfb_info->par;
+ fsl_info->count = 0,
+ fsl_info->parent = dcfb;
+
+ info = dcfb->fsl_dcfb_info;
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->fbops = &fsl_dcfb_ops;
+ info->flags = FBINFO_FLAG_DEFAULT;
+ info->pseudo_palette = &fsl_info->pseudo_palette;
+
+ ret = fb_alloc_cmap(&info->cmap, 16, 0);
+ if (ret) {
+ ret = -ENOMEM;
+ goto err_mem;
+ }
+
+ ret = fsl_dcfb_init_fbinfo(info);
+ if (ret)
+ goto err_cmap;
+
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(dcfb->dev, "failed to register framebuffer device\n");
+ goto err_cmap;
+ }
+
+ dev_set_drvdata(&pdev->dev, dcfb);
+
+ goto out;
+
+err_cmap:
+ fb_dealloc_cmap(&info->cmap);
+err_mem:
+ framebuffer_release(dcfb->fsl_dcfb_info);
+err_clk:
+ clk_disable_unprepare(dcfb->clk);
+out:
+ return ret;
+}
+
+static int fsl_dcfb_remove(struct platform_device *pdev)
+{
+ struct fsl_dcfb_fb_private *dcfb = dev_get_drvdata(&pdev->dev);
+ struct fb_info *info = dcfb->fsl_dcfb_info;
+
+ fsl_dcfb_modeset(dcfb, FSL_DCFB_MOD_OFF);
+ fsl_dcfb_free_mem(info);
+
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(dcfb->fsl_dcfb_info);
+ clk_disable_unprepare(dcfb->clk);
+
+ return 0;
+}
+
+static struct of_device_id fsl_dcfb_dt_ids[] = {
+ { .compatible = "fsl,ls1021a-dcfb", },
+ {}
+};
+
+static struct platform_driver fsl_dcfb_driver = {
+ .driver = {
+ .name = "fsl-dcfb",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_dcfb_dt_ids,
+ },
+ .probe = fsl_dcfb_probe,
+ .remove = fsl_dcfb_remove,
+};
+
+module_platform_driver(fsl_dcfb_driver);
+
+MODULE_DESCRIPTION("Freescale Simple Display Controller FB Driver");
+MODULE_ALIAS("platform:fsl-dcfb");
+MODULE_LICENSE("GPL v2");
--
2.1.0.27.g96db324
^ permalink raw reply related
* [PATCHv2 2/4] video: fsl-dcfb: Add devicetree binding support
From: Xiubo Li @ 2014-12-03 9:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1417598162-40433-1-git-send-email-Li.Xiubo@freescale.com>
Add devicetree binding support for fsl-dcfb framebuffer driver. It
uses the generic display bindings and helper functions.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
.../devicetree/bindings/video/fsl,dcfb.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/fsl,dcfb.txt
diff --git a/Documentation/devicetree/bindings/video/fsl,dcfb.txt b/Documentation/devicetree/bindings/video/fsl,dcfb.txt
new file mode 100644
index 0000000..2f3d02b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,dcfb.txt
@@ -0,0 +1,52 @@
+* Freescale Simple Display Controller FB Driver
+
+== For dcfb node =+Required properties:
+- compatible: Should be one of "fsl,ls1021a-dcfb".
+- reg: Address and length of the register set for dcfb.
+- clocks: From common clock binding: handle to dcfb clock.
+- clock-names: From common clock binding: Shall be "dcfb".
+- display: The phandle to display node.
+
+Optional properties:
+- scfg-controller: The phandle of scfg node.
+
+== For display sub-node =+Required properties:
+- bits-per-pixel: <16> for RGB565,
+ <24> for RGB888,
+ <32> for RGB8888.
+
+Required timing node for dispplay sub-node:
+- display-timings: Refer to binding doc display-timing.txt for details.
+
+Examples:
+dcfb: dcfb@2ce0000 {
+ compatible = "fsl,ls1021a-dcfb";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcfb";
+ scfg-controller = <&scfg>;
+ display = <&display>;
+
+ display: display@0 {
+ bits-per-pixel = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: nl4827hc19 {
+ clock-frequency = <10870000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <1>;
+ vfront-porch = <1>;
+ hsync-len = <41>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+};
--
2.1.0.27.g96db324
^ permalink raw reply related
* [PATCHv2 3/4] ARM: ls1021a: dtsi: Add dt node support for dcfb.
From: Xiubo Li @ 2014-12-03 9:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1417598162-40433-1-git-send-email-Li.Xiubo@freescale.com>
On LS1021A SoC, the dcfb device is in BE mode.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..740a04e 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -383,6 +383,16 @@
<&platform_clk 1>;
};
+ dcfb: dcfb@2ce0000 {
+ compatible = "fsl,ls1021a-dcfb";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcfb";
+ scfg-controller = <&scfg>;
+ big-endian;
+ status = "disabled";
+ };
+
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
--
2.1.0.27.g96db324
^ permalink raw reply related
* [PATCHv2 4/4] ARM: ls1021a: dts: Add and enable dt node for dcfb.
From: Xiubo Li @ 2014-12-03 9:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1417598162-40433-1-git-send-email-Li.Xiubo@freescale.com>
On LS1021A TWR board, the TFT LCD panel is WQVGA "480x272", and
the bpp is 24.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
arch/arm/boot/dts/ls1021a-twr.dts | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a2c591e..3602286 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -58,6 +58,32 @@
};
};
+&dcfb {
+ display = <&display>;
+ status = "okay";
+
+ display: display@0 {
+ bits-per-pixel = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: nl4827hc19 {
+ clock-frequency = <10870000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ hsync-len = <41>;
+ vsync-len = <4>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+};
+
&dspi1 {
bus-num = <0>;
status = "okay";
--
2.1.0.27.g96db324
^ permalink raw reply related
* Re: [PATCHv2 0/4] LS1021A: Add dcfb framebuffer driver support.
From: Arnd Bergmann @ 2014-12-03 9:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1417598162-40433-1-git-send-email-Li.Xiubo@freescale.com>
On Wednesday 03 December 2014 17:15:58 Xiubo Li wrote:
> Framebuffer driver for the Freescale SoC Display Controller.
>
>
> Change in V2:
> - Use the native-mode timing as default.
> - Add to_fsl_private().
<standard reply>
We try to not have any new framebuffer drivers. Please consider making
this a DRM/KMS driver instead.
</standard reply>
Arnd
^ permalink raw reply
* Re: [PATCH v10 2/6] backlight: Add support Skyworks SKY81452 backlight driver
From: Oliver Neukum @ 2014-12-03 10:02 UTC (permalink / raw)
To: gyungoh
Cc: sameo, lee.jones, grant.likely, robh+dt, jg1.han, cooloney,
pawel.moll, mark.rutland, ijc+devicetree, galak, trivial, akpm,
jic23, thomas.petazzoni, ktsai, hs, stwiss.opensource,
matti.vaittinen, broonie, jason, heiko, shawn.guo,
florian.vaussard, andrew, antonynpavlov, hytszk, plagnioj,
tomi.valkeinen, jack.yoo, linux-fbdev, linux-kernel, devicetree
In-Reply-To: <1417590332-4912-3-git-send-email-jack.yoo@skyworksinc.com>
On Wed, 2014-12-03 at 16:05 +0900, gyungoh@gmail.com wrote:
> +static ssize_t sky81452_bl_store_enable(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t
> count)
> +{
> + struct regmap *regmap = bl_get_data(to_backlight_device(dev));
> + unsigned long value;
> + int ret;
> +
> + ret = kstrtoul(buf, 16, &value);
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
> + value << CTZ(SKY81452_EN));
No range checking for value?
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + return count;
> +}
Regards
Oliver
--
Oliver Neukum <oneukum@suse.de>
^ permalink raw reply
* Re: [PATCH v2 1/2] backlight/lp855x: Refactor dt parsing code
From: Lee Jones @ 2014-12-03 10:15 UTC (permalink / raw)
To: Sean Paul
Cc: milo.kim-l0cyMroinI0, cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, jg1.han-Sze3O3UU22JBDgjK7y7TUQ,
Stéphane Marchesin
In-Reply-To: <1417570752-23633-1-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On Tue, 02 Dec 2014, Sean Paul wrote:
> This patch refactors the dt parsing code to avoid setting platform_data,
> instead just setting lp->pdata directly. This facilitates easier
> probe deferral since the current scheme would require us to clear out
> dev->platform_data before deferring.
>
> Cc: Stéphane Marchesin <marcheu@chromium.org>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
> drivers/video/backlight/lp855x_bl.c | 37 ++++++++++++++++++-------------------
> 1 file changed, 18 insertions(+), 19 deletions(-)
Applied with Acks, thanks.
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 25fb8e3..257b3ba 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -341,8 +341,10 @@ static const struct attribute_group lp855x_attr_group = {
> };
>
> #ifdef CONFIG_OF
> -static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> +static int lp855x_parse_dt(struct lp855x *lp)
> {
> + struct device *dev = lp->dev;
> + struct device_node *node = dev->of_node;
> struct lp855x_platform_data *pdata;
> int rom_length;
>
> @@ -381,12 +383,12 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> pdata->rom_data = &rom[0];
> }
>
> - dev->platform_data = pdata;
> + lp->pdata = pdata;
>
> return 0;
> }
> #else
> -static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> +static int lp855x_parse_dt(struct lp855x *lp)
> {
> return -EINVAL;
> }
> @@ -395,18 +397,8 @@ static int lp855x_parse_dt(struct device *dev, struct device_node *node)
> static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> {
> struct lp855x *lp;
> - struct lp855x_platform_data *pdata = dev_get_platdata(&cl->dev);
> - struct device_node *node = cl->dev.of_node;
> int ret;
>
> - if (!pdata) {
> - ret = lp855x_parse_dt(&cl->dev, node);
> - if (ret < 0)
> - return ret;
> -
> - pdata = dev_get_platdata(&cl->dev);
> - }
> -
> if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> return -EIO;
>
> @@ -414,16 +406,23 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> if (!lp)
> return -ENOMEM;
>
> - if (pdata->period_ns > 0)
> - lp->mode = PWM_BASED;
> - else
> - lp->mode = REGISTER_BASED;
> -
> lp->client = cl;
> lp->dev = &cl->dev;
> - lp->pdata = pdata;
> lp->chipname = id->name;
> lp->chip_id = id->driver_data;
> + lp->pdata = dev_get_platdata(&cl->dev);
> +
> + if (!lp->pdata) {
> + ret = lp855x_parse_dt(lp);
> + if (ret < 0)
> + return ret;
> + }
> +
> + if (lp->pdata->period_ns > 0)
> + lp->mode = PWM_BASED;
> + else
> + lp->mode = REGISTER_BASED;
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* Re: [PATCH v2 2/2] backlight/lp855x: Add supply regulator to lp855x
From: Lee Jones @ 2014-12-03 10:15 UTC (permalink / raw)
To: Sean Paul
Cc: milo.kim-l0cyMroinI0, cooloney-Re5JQEeQqe8AvxtiuMwx3w,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, jg1.han-Sze3O3UU22JBDgjK7y7TUQ,
Stéphane Marchesin, Aaron Durbin
In-Reply-To: <1417570752-23633-2-git-send-email-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
On Tue, 02 Dec 2014, Sean Paul wrote:
> This patch adds a supply regulator to the lp855x platform data to facilitate
> powering on/off the 3V rail attached to the controller.
>
> Cc: Stéphane Marchesin <marcheu@chromium.org>
> Cc: Aaron Durbin <adurbin@chromium.org>
> Acked-by: Milo Kim <milo.kim@ti.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
>
> Changes in v2:
> - Add NULL check in lp855x_remove
>
>
> .../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
> drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
> include/linux/platform_data/lp855x.h | 2 ++
> 3 files changed, 22 insertions(+)
Applied with Acks, thanks.
> diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> index 96e83a5..0a3ecbc 100644
> --- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> +++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
> @@ -12,6 +12,7 @@ Optional properties:
> - pwm-period: PWM period value. Set only PWM input mode used (u32)
> - rom-addr: Register address of ROM area to be updated (u8)
> - rom-val: Register value to be updated (u8)
> + - power-supply: Regulator which controls the 3V rail
>
> Example:
>
> @@ -56,6 +57,7 @@ Example:
> backlight@2c {
> compatible = "ti,lp8557";
> reg = <0x2c>;
> + power-supply = <&backlight_vdd>;
>
> dev-ctrl = /bits/ 8 <0x41>;
> init-brt = /bits/ 8 <0x0a>;
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index 257b3ba..a26d3bb 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -17,6 +17,7 @@
> #include <linux/of.h>
> #include <linux/platform_data/lp855x.h>
> #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>
> /* LP8550/1/2/3/6 Registers */
> #define LP855X_BRIGHTNESS_CTRL 0x00
> @@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp)
> pdata->rom_data = &rom[0];
> }
>
> + pdata->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(pdata->supply)) {
> + if (PTR_ERR(pdata->supply) = -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + pdata->supply = NULL;
> + }
> +
> lp->pdata = pdata;
>
> return 0;
> @@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> else
> lp->mode = REGISTER_BASED;
>
> + if (lp->pdata->supply) {
> + ret = regulator_enable(lp->pdata->supply);
> + if (ret < 0) {
> + dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
> + return ret;
> + }
> + }
> +
> i2c_set_clientdata(cl, lp);
>
> ret = lp855x_configure(lp);
> @@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl)
>
> lp->bl->props.brightness = 0;
> backlight_update_status(lp->bl);
> + if (lp->pdata->supply)
> + regulator_disable(lp->pdata->supply);
> sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
>
> return 0;
> diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
> index 1b2ba24..9c7fd1e 100644
> --- a/include/linux/platform_data/lp855x.h
> +++ b/include/linux/platform_data/lp855x.h
> @@ -136,6 +136,7 @@ struct lp855x_rom_data {
> Only valid when mode is PWM_BASED.
> * @size_program : total size of lp855x_rom_data
> * @rom_data : list of new eeprom/eprom registers
> + * @supply : regulator that supplies 3V input
> */
> struct lp855x_platform_data {
> const char *name;
> @@ -144,6 +145,7 @@ struct lp855x_platform_data {
> unsigned int period_ns;
> int size_program;
> struct lp855x_rom_data *rom_data;
> + struct regulator *supply;
> };
>
> #endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox