* [PATCH] fpga: machxo2-spi: Use new structure for SPI transfer delays
@ 2020-02-27 14:24 Sergiu Cuciurean
2020-03-01 16:21 ` Moritz Fischer
0 siblings, 1 reply; 2+ messages in thread
From: Sergiu Cuciurean @ 2020-02-27 14:24 UTC (permalink / raw)
To: mdf, linux-fpga, linux-kernel; +Cc: Sergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
---
drivers/fpga/machxo2-spi.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index 4d8a87641587..b316369156fe 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -157,7 +157,8 @@ static int machxo2_cleanup(struct fpga_manager *mgr)
spi_message_init(&msg);
tx[1].tx_buf = &refresh;
tx[1].len = sizeof(refresh);
- tx[1].delay_usecs = MACHXO2_REFRESH_USEC;
+ tx[1].delay.value = MACHXO2_REFRESH_USEC;
+ tx[1].delay.unit = SPI_DELAY_UNIT_USECS;
spi_message_add_tail(&tx[1], &msg);
ret = spi_sync(spi, &msg);
if (ret)
@@ -208,7 +209,8 @@ static int machxo2_write_init(struct fpga_manager *mgr,
spi_message_init(&msg);
tx[0].tx_buf = &enable;
tx[0].len = sizeof(enable);
- tx[0].delay_usecs = MACHXO2_LOW_DELAY_USEC;
+ tx[0].delay.value = MACHXO2_LOW_DELAY_USEC;
+ tx[0].delay.unit = SPI_DELAY_UNIT_USECS;
spi_message_add_tail(&tx[0], &msg);
tx[1].tx_buf = &erase;
@@ -269,7 +271,8 @@ static int machxo2_write(struct fpga_manager *mgr, const char *buf,
spi_message_init(&msg);
tx.tx_buf = payload;
tx.len = MACHXO2_BUF_SIZE;
- tx.delay_usecs = MACHXO2_HIGH_DELAY_USEC;
+ tx.delay.value = MACHXO2_HIGH_DELAY_USEC;
+ tx.delay.unit = SPI_DELAY_UNIT_USECS;
spi_message_add_tail(&tx, &msg);
ret = spi_sync(spi, &msg);
if (ret) {
@@ -317,7 +320,8 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
spi_message_init(&msg);
tx[1].tx_buf = &refresh;
tx[1].len = sizeof(refresh);
- tx[1].delay_usecs = MACHXO2_REFRESH_USEC;
+ tx[1].delay.value = MACHXO2_REFRESH_USEC;
+ tx[1].delay.unit = SPI_DELAY_UNIT_USECS;
spi_message_add_tail(&tx[1], &msg);
ret = spi_sync(spi, &msg);
if (ret)
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] fpga: machxo2-spi: Use new structure for SPI transfer delays
2020-02-27 14:24 [PATCH] fpga: machxo2-spi: Use new structure for SPI transfer delays Sergiu Cuciurean
@ 2020-03-01 16:21 ` Moritz Fischer
0 siblings, 0 replies; 2+ messages in thread
From: Moritz Fischer @ 2020-03-01 16:21 UTC (permalink / raw)
To: Sergiu Cuciurean; +Cc: mdf, linux-fpga, linux-kernel
On Thu, Feb 27, 2020 at 04:24:14PM +0200, Sergiu Cuciurean wrote:
> In a recent change to the SPI subsystem [1], a new `delay` struct was added
> to replace the `delay_usecs`. This change replaces the current
> `delay_usecs` with `delay` for this driver.
>
> The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
> that both `delay_usecs` & `delay` are used (in this order to preserve
> backwards compatibility).
>
> [1] commit bebcfd272df6 ("spi: introduce `delay` field for
> `spi_transfer` + spi_transfer_delay_exec()")
>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
> ---
> drivers/fpga/machxo2-spi.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
> index 4d8a87641587..b316369156fe 100644
> --- a/drivers/fpga/machxo2-spi.c
> +++ b/drivers/fpga/machxo2-spi.c
> @@ -157,7 +157,8 @@ static int machxo2_cleanup(struct fpga_manager *mgr)
> spi_message_init(&msg);
> tx[1].tx_buf = &refresh;
> tx[1].len = sizeof(refresh);
> - tx[1].delay_usecs = MACHXO2_REFRESH_USEC;
> + tx[1].delay.value = MACHXO2_REFRESH_USEC;
> + tx[1].delay.unit = SPI_DELAY_UNIT_USECS;
> spi_message_add_tail(&tx[1], &msg);
> ret = spi_sync(spi, &msg);
> if (ret)
> @@ -208,7 +209,8 @@ static int machxo2_write_init(struct fpga_manager *mgr,
> spi_message_init(&msg);
> tx[0].tx_buf = &enable;
> tx[0].len = sizeof(enable);
> - tx[0].delay_usecs = MACHXO2_LOW_DELAY_USEC;
> + tx[0].delay.value = MACHXO2_LOW_DELAY_USEC;
> + tx[0].delay.unit = SPI_DELAY_UNIT_USECS;
> spi_message_add_tail(&tx[0], &msg);
>
> tx[1].tx_buf = &erase;
> @@ -269,7 +271,8 @@ static int machxo2_write(struct fpga_manager *mgr, const char *buf,
> spi_message_init(&msg);
> tx.tx_buf = payload;
> tx.len = MACHXO2_BUF_SIZE;
> - tx.delay_usecs = MACHXO2_HIGH_DELAY_USEC;
> + tx.delay.value = MACHXO2_HIGH_DELAY_USEC;
> + tx.delay.unit = SPI_DELAY_UNIT_USECS;
> spi_message_add_tail(&tx, &msg);
> ret = spi_sync(spi, &msg);
> if (ret) {
> @@ -317,7 +320,8 @@ static int machxo2_write_complete(struct fpga_manager *mgr,
> spi_message_init(&msg);
> tx[1].tx_buf = &refresh;
> tx[1].len = sizeof(refresh);
> - tx[1].delay_usecs = MACHXO2_REFRESH_USEC;
> + tx[1].delay.value = MACHXO2_REFRESH_USEC;
> + tx[1].delay.unit = SPI_DELAY_UNIT_USECS;
> spi_message_add_tail(&tx[1], &msg);
> ret = spi_sync(spi, &msg);
> if (ret)
> --
> 2.17.1
>
Applied to for-next,
Thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-01 16:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-02-27 14:24 [PATCH] fpga: machxo2-spi: Use new structure for SPI transfer delays Sergiu Cuciurean
2020-03-01 16:21 ` Moritz Fischer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).