From: Philipp Stanner <pstanner@redhat.com>
To: "Jonathan Corbet" <corbet@lwn.net>,
"Jens Axboe" <axboe@kernel.dk>, "Wu Hao" <hao.wu@intel.com>,
"Tom Rix" <trix@redhat.com>, "Moritz Fischer" <mdf@kernel.org>,
"Xu Yilun" <yilun.xu@intel.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <brgl@bgdev.pl>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Jose Abreu" <joabreu@synopsys.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Alvaro Karsz" <alvaro.karsz@solid-run.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Jason Wang" <jasowang@redhat.com>,
"Xuan Zhuo" <xuanzhuo@linux.alibaba.com>,
"Eugenio Pérez" <eperezma@redhat.com>,
"Richard Cochran" <richardcochran@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Philipp Stanner" <pstanner@redhat.com>,
"Damien Le Moal" <dlemoal@kernel.org>,
"Hannes Reinecke" <hare@suse.de>,
"Chaitanya Kulkarni" <kch@nvidia.com>
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-block@vger.kernel.org, linux-fpga@vger.kernel.org,
linux-gpio@vger.kernel.org, netdev@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
virtualization@lists.linux.dev
Subject: [PATCH v3 6/9] ethernet: stmicro: Simplify PCI devres usage
Date: Thu, 22 Aug 2024 15:47:38 +0200 [thread overview]
Message-ID: <20240822134744.44919-7-pstanner@redhat.com> (raw)
In-Reply-To: <20240822134744.44919-1-pstanner@redhat.com>
stmicro uses PCI devres in the wrong way. Resources requested
through pcim_* functions don't need to be cleaned up manually in the
remove() callback or in the error unwind path of a probe() function.
Moreover, there is an unnecessary loop which only requests and ioremaps
BAR 0, but iterates over all BARs nevertheless.
Furthermore, pcim_iomap_regions() and pcim_iomap_table() have been
deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Remove the unnecessary manual pcim_* cleanup calls.
Remove the unnecessary loop over all BARs.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
---
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 25 +++++--------------
.../net/ethernet/stmicro/stmmac/stmmac_pci.c | 18 +++++--------
2 files changed, 12 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 9e40c28d453a..5d42a9fad672 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -50,7 +50,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
struct plat_stmmacenet_data *plat;
struct stmmac_resources res;
struct device_node *np;
- int ret, i, phy_mode;
+ int ret, phy_mode;
np = dev_of_node(&pdev->dev);
@@ -88,14 +88,11 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
goto err_put_node;
}
- /* Get the base address of device */
- for (i = 0; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
- if (ret)
- goto err_disable_device;
- break;
+ memset(&res, 0, sizeof(res));
+ res.addr = pcim_iomap_region(pdev, 0, pci_name(pdev));
+ if (IS_ERR(res.addr)) {
+ ret = PTR_ERR(res.addr);
+ goto err_disable_device;
}
plat->bus_id = of_alias_get_id(np, "ethernet");
@@ -116,8 +113,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
loongson_default_data(plat);
pci_enable_msi(pdev);
- memset(&res, 0, sizeof(res));
- res.addr = pcim_iomap_table(pdev)[0];
res.irq = of_irq_get_byname(np, "macirq");
if (res.irq < 0) {
@@ -158,18 +153,10 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
{
struct net_device *ndev = dev_get_drvdata(&pdev->dev);
struct stmmac_priv *priv = netdev_priv(ndev);
- int i;
of_node_put(priv->plat->mdio_node);
stmmac_dvr_remove(&pdev->dev);
- for (i = 0; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- pcim_iounmap_regions(pdev, BIT(i));
- break;
- }
-
pci_disable_msi(pdev);
pci_disable_device(pdev);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 352b01678c22..f89a8a54c4e8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -188,11 +188,11 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
return ret;
}
- /* Get the base address of device */
+ /* Request the base address BAR of device */
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
- ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
+ ret = pcim_request_region(pdev, i, pci_name(pdev));
if (ret)
return ret;
break;
@@ -205,7 +205,10 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
return ret;
memset(&res, 0, sizeof(res));
- res.addr = pcim_iomap_table(pdev)[i];
+ /* Get the base address of device */
+ res.addr = pcim_iomap(pdev, i, 0);
+ if (!res.addr)
+ return -ENOMEM;
res.wol_irq = pdev->irq;
res.irq = pdev->irq;
@@ -231,16 +234,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
*/
static void stmmac_pci_remove(struct pci_dev *pdev)
{
- int i;
-
stmmac_dvr_remove(&pdev->dev);
-
- for (i = 0; i < PCI_STD_NUM_BARS; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- pcim_iounmap_regions(pdev, BIT(i));
- break;
- }
}
static int __maybe_unused stmmac_pci_suspend(struct device *dev)
--
2.46.0
next prev parent reply other threads:[~2024-08-22 13:48 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 13:47 [PATCH v3 0/9] PCI: Remove pcim_iounmap_regions() Philipp Stanner
2024-08-22 13:47 ` [PATCH v3 1/9] PCI: Make pcim_iounmap_region() a public function Philipp Stanner
2024-08-22 13:47 ` [PATCH v3 2/9] fpga/dfl-pci.c: Replace deprecated PCI functions Philipp Stanner
2024-08-27 3:28 ` Xu Yilun
2024-08-22 13:47 ` [PATCH v3 3/9] block: mtip32xx: " Philipp Stanner
2024-08-22 13:47 ` [PATCH v3 4/9] gpio: " Philipp Stanner
2024-08-22 13:47 ` [PATCH v3 5/9] ethernet: cavium: " Philipp Stanner
2024-08-22 14:44 ` Andy Shevchenko
2024-08-26 14:51 ` Philipp Stanner
2024-08-26 15:41 ` Andy Shevchenko
2024-08-26 15:52 ` Philipp Stanner
2024-08-26 17:12 ` Andy Shevchenko
2024-08-22 13:47 ` Philipp Stanner [this message]
2024-08-22 14:46 ` [PATCH v3 6/9] ethernet: stmicro: Simplify PCI devres usage Andy Shevchenko
2024-08-23 9:29 ` Serge Semin
2024-08-26 6:30 ` Philipp Stanner
2024-08-22 13:47 ` [PATCH v3 7/9] vdpa: solidrun: Fix UB bug with devres Philipp Stanner
2024-08-22 14:34 ` Christophe JAILLET
2024-08-26 6:55 ` Philipp Stanner
2024-08-22 14:47 ` Andy Shevchenko
2024-08-22 13:47 ` [PATCH v3 8/9] vdap: solidrun: Replace deprecated PCI functions Philipp Stanner
2024-08-22 14:49 ` Andy Shevchenko
2024-08-22 13:47 ` [PATCH v3 9/9] PCI: Remove pcim_iounmap_regions() Philipp Stanner
2024-08-22 14:50 ` [PATCH v3 0/9] " Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240822134744.44919-7-pstanner@redhat.com \
--to=pstanner@redhat.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alvaro.karsz@solid-run.com \
--cc=andy@kernel.org \
--cc=axboe@kernel.dk \
--cc=bhelgaas@google.com \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=dlechner@baylibre.com \
--cc=dlemoal@kernel.org \
--cc=edumazet@google.com \
--cc=eperezma@redhat.com \
--cc=hao.wu@intel.com \
--cc=hare@suse.de \
--cc=jasowang@redhat.com \
--cc=joabreu@synopsys.com \
--cc=kch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mdf@kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=trix@redhat.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=virtualization@lists.linux.dev \
--cc=xuanzhuo@linux.alibaba.com \
--cc=yilun.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).