Re: [PATCH 2/3] dt-bindings: fpga: xlnx,fpga-slave-selectmap: add DT schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 29/01/2024 23:56, Charles Perry wrote:
> Document the slave SelectMAP interface of Xilinx 7 series FPGA.
> 
> Signed-off-by: Charles Perry <charles.perry@savoirfairelinux.com>
> ---
>  .../fpga/xlnx,fpga-slave-selectmap.yaml       | 85 +++++++++++++++++++
>  1 file changed, 85 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-selectmap.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-selectmap.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-selectmap.yaml
> new file mode 100644
> index 0000000000000..20cea24e3e39a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-selectmap.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-selectmap.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx Slave SelectMAP FPGA

https://elixir.bootlin.com/linux/v6.8-rc2/source/Documentation/process/coding-style.rst#L338

Everywhere: compatible, title, filename, descriptions.

> +
> +description: |
> +  Xilinx 7 Series FPGAs support a method of loading the bitstream over a
> +  parallel port named the slave SelectMAP interface in the documentation. Only
> +  the x8 mode is supported where data is loaded at one byte per rising edge of
> +  the clock, with the MSB of each byte presented to the D0 pin.
> +
> +  Datasheets:
> +    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf

I am surprised that AMD/Xilinx still did not update the document to
modern naming (slave->secondary).

+Cc Michal,
Maybe that's something you could push it.

Best regards,
Krzysztof