From: Tom Rix <trix@redhat.com>
To: Xu Yilun <yilun.xu@intel.com>,
gregkh@linuxfoundation.org, mdf@kernel.org,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: lgoncalv@redhat.com, hao.wu@intel.com
Subject: Re: [PATCH v10 1/2] uio: uio_dfl: add userspace i/o driver for DFL bus
Date: Mon, 1 Feb 2021 06:12:21 -0800 [thread overview]
Message-ID: <d100069d-c953-209c-9e74-a336c644887b@redhat.com> (raw)
In-Reply-To: <1612157883-18616-2-git-send-email-yilun.xu@intel.com>
On 1/31/21 9:38 PM, Xu Yilun wrote:
> This patch supports the DFL drivers be written in userspace. This is
> realized by exposing the userspace I/O device interfaces.
>
> The driver now only binds the ether group feature, which has no irq. So
> the irq support is not implemented yet.
>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> ---
> v9: switch to add a uio driver in drivers/uio
> v10: add the source file in MAINTAINERS
> more descriptive Kconfig header
> add detailed path for opae uio example
> ---
> MAINTAINERS | 1 +
> drivers/uio/Kconfig | 17 +++++++++++++
> drivers/uio/Makefile | 1 +
> drivers/uio/uio_dfl.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 85 insertions(+)
> create mode 100644 drivers/uio/uio_dfl.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 147d1d9..4d01a21 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6943,6 +6943,7 @@ S: Maintained
> F: Documentation/ABI/testing/sysfs-bus-dfl*
> F: Documentation/fpga/dfl.rst
> F: drivers/fpga/dfl*
> +F: drivers/uio/uio_dfl.c
> F: include/linux/dfl.h
> F: include/uapi/linux/fpga-dfl.h
>
> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> index 202ee81..5531f3a 100644
> --- a/drivers/uio/Kconfig
> +++ b/drivers/uio/Kconfig
> @@ -165,4 +165,21 @@ config UIO_HV_GENERIC
> to network and storage devices from userspace.
>
> If you compile this as a module, it will be called uio_hv_generic.
> +
> +config UIO_DFL
> + tristate "Generic driver for DFL (Device Feature List) bus"
> + depends on FPGA_DFL
> + help
> + Generic DFL (Device Feature List) driver for Userspace I/O devices.
> + It is useful to provide direct access to DFL devices from userspace.
> + A sample userspace application using this driver is available for
> + download in a git repository:
> +
> + git clone https://github.com/OPAE/opae-sdk.git
> +
> + It could be found at:
> +
> + opae-sdk/tools/libopaeuio/
Yes, it is there. Thanks!
Reviewed-by: Tom Rix <trix@redhat.com>
> +
> + If you compile this as a module, it will be called uio_dfl.
> endif
> diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
> index c285dd2..f2f416a1 100644
> --- a/drivers/uio/Makefile
> +++ b/drivers/uio/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o
> obj-$(CONFIG_UIO_MF624) += uio_mf624.o
> obj-$(CONFIG_UIO_FSL_ELBC_GPCM) += uio_fsl_elbc_gpcm.o
> obj-$(CONFIG_UIO_HV_GENERIC) += uio_hv_generic.o
> +obj-$(CONFIG_UIO_DFL) += uio_dfl.o
> diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c
> new file mode 100644
> index 0000000..89c0fc7
> --- /dev/null
> +++ b/drivers/uio/uio_dfl.c
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Generic DFL driver for Userspace I/O devicess
> + *
> + * Copyright (C) 2021 Intel Corporation, Inc.
> + */
> +#include <linux/dfl.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/uio_driver.h>
> +
> +#define DRIVER_NAME "uio_dfl"
> +
> +static int uio_dfl_probe(struct dfl_device *ddev)
> +{
> + struct resource *r = &ddev->mmio_res;
> + struct device *dev = &ddev->dev;
> + struct uio_info *uioinfo;
> + struct uio_mem *uiomem;
> + int ret;
> +
> + uioinfo = devm_kzalloc(dev, sizeof(struct uio_info), GFP_KERNEL);
> + if (!uioinfo)
> + return -ENOMEM;
> +
> + uioinfo->name = DRIVER_NAME;
> + uioinfo->version = "0";
> +
> + uiomem = &uioinfo->mem[0];
> + uiomem->memtype = UIO_MEM_PHYS;
> + uiomem->addr = r->start & PAGE_MASK;
> + uiomem->offs = r->start & ~PAGE_MASK;
> + uiomem->size = (uiomem->offs + resource_size(r)
> + + PAGE_SIZE - 1) & PAGE_MASK;
> + uiomem->name = r->name;
> +
> + /* Irq is yet to be supported */
> + uioinfo->irq = UIO_IRQ_NONE;
> +
> + ret = devm_uio_register_device(dev, uioinfo);
> + if (ret)
> + dev_err(dev, "unable to register uio device\n");
> +
> + return ret;
> +}
> +
> +#define FME_FEATURE_ID_ETH_GROUP 0x10
> +
> +static const struct dfl_device_id uio_dfl_ids[] = {
> + { FME_ID, FME_FEATURE_ID_ETH_GROUP },
> + { }
> +};
> +MODULE_DEVICE_TABLE(dfl, uio_dfl_ids);
> +
> +static struct dfl_driver uio_dfl_driver = {
> + .drv = {
> + .name = DRIVER_NAME,
> + },
> + .id_table = uio_dfl_ids,
> + .probe = uio_dfl_probe,
> +};
> +module_dfl_driver(uio_dfl_driver);
> +
> +MODULE_DESCRIPTION("Generic DFL driver for Userspace I/O devices");
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL v2");
next prev parent reply other threads:[~2021-02-01 14:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-01 5:38 [PATCH v10 0/2] UIO support for dfl devices Xu Yilun
2021-02-01 5:38 ` [PATCH v10 1/2] uio: uio_dfl: add userspace i/o driver for DFL bus Xu Yilun
2021-02-01 14:12 ` Tom Rix [this message]
2021-02-01 5:38 ` [PATCH v10 2/2] Documentation: fpga: dfl: Add description for DFL UIO support Xu Yilun
2021-02-01 12:59 ` Wu, Hao
2021-02-02 1:59 ` Xu Yilun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d100069d-c953-209c-9e74-a336c644887b@redhat.com \
--to=trix@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=hao.wu@intel.com \
--cc=lgoncalv@redhat.com \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mdf@kernel.org \
--cc=yilun.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).