New software uploaded by Joseph on Nov 23 15:30:00 MSK 2006

New software uploaded by Joseph on Nov 23 15:30:00 MSK 2006

[Nancy Armstrong]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit, Size: 6514 bytes --]


Joseph has uploaded some new software for you!


Click here to view available updated software from Joseph:
http://eki-oem.com/?Joseph


10.4.1.  Using ESDI hard disks
the previous two, it is a list of `exec:dir' pairs.  For example,
	utility:
experience.
problem with the cabling or a mis-configured modem, because getty
expanding our list of supported peripherals since we generally lack
output ath0\13	   ; hayes command for on hook
have created.  Due to the non-random access nature of tapes, this
standard devices to work with newer-standard ones.  So, an old SCSI-1
Note: If you are concerned about the privacy of jobs that users print,
password and then starting the user's shell.
have the keyword `mail' in their descriptions.  This is actually func-
In FreeBSD's /etc/exports file, this is controlled by the ``-alldirs''
If the DTR indicator doesn't light, login to the FreeBSD system
The boot message identifier for this drive is "HP HP35470A T503" type
#  diablo-if-net - Text filter for Diablo printer `scrivener' listening
please see ``Obtaining       FreeBSD'' in the Appendix.
su to root.  This is controlled by having an instance of root
2.2.2.  Before installing from Floppy
running under FreeBSD.
describes two levels of setup:
This is a DDS-1 tape drive.  DDS-1 is the original DAT tape format.
provider's IP address and possibly your own (though you can also leave
		      control inputs.  CTS is connected to RTS,
	reduce printer wear-and-tear and encourage photocopier usage.
bugs.
In the IBM Personal Computer and similar systems, a subset of RS232-C
	will not print anything else in its queue.  Even though the
written, the first following expression is the address to write to,
C	Clone: Generates a new route based upon this route for machines
2.1-RELEASE and have an IDE CDROM, use the inst_ide.bat or
Actually, if this utility is not part of the ports tree you should
# gated configuration file for dc.dsu.edu; for gated version 3.5alpha5
RX lights flash for each working port.
This is an 8mm tape drive.
The host1 line refers to our host, which it knows by ethernet address.
	echo "Usage: dds_changer [123456ne] raw-device-name
Create a "link tree" to it using the lndir(1) command that comes with
			       ll
0x00 write	 Channel 0 starting address
permissions on the files (especially the /dev/cua* files) to make sure
o  Q. At work, we're using frobble, which is in your ports collection,
	Clears local mode bits clear-bits after opening the device.
for inclusion in next release of the code.  This will only make your
compiling until I've had a chance to see if my patches worked
Here are some commonly asked questions about installing FreeBSD on
The obvious drawback to a header page is that it is yet one more sheet
There are two ways of getting hold of the FreeBSD port for a program.
28 July 1995.
automatically applied.  All patches should be relative to ${WRKSRC}
The slattach man page says you have to use "ifconfig sl0 down" to mark
	complete rewrite of PLP.  Patrick Powell and Justin Mason (the
readers with an aversion to intricate shell-scripts are advised not
subdirectory of `lib', which does not bode well with the BSD paradigm.
tcpflags flags
Contributed by Guy Helmer <ghelmeralpha.dsu.edu>.
lines only contain one argument.  Anything following a # is considered
11.4.5.  Configuration Files
by the same means.  Contact Poul-Henning Kamp <phkFreeBSD> for
# the parameters:
ACB-2320. No other operating system was present on the disk.
ports (UDP and TCP).
import proto rip interface ed {
quality and feature set of the system well into 1996 and beyond.
questions!  ;)
you use PPP. Further, you have a modem (or other device) connected and
	       :nx=V2400:tc=std.9600:
	subscribe to this list.
2. Where the current device sio xxx lines are, you will need to add 16
teak|hp|laserjet|Hewlett Packard LaserJet 3Si:\
Tape libraries and changers are not available.
an additional serial or parallel port if your kernel is not already
not a manual nor an in-depth description on how to use or compile the
	characters that FreeBSD uses to end a line are being treated as
like you can for any other program.
#!/bin/sh
unit numbers.
files you need from various ftp sites.  Information on where to look
50k/sec), thus resulting in a quicker installation.
The standard scenario is that you FTP down the tarball, extract it
		      "0", based on the value of Bit 4.
mailed to the FreeBSD technical discussions mailing list <freebsd-
subdirectory `files' and use the post-extract target to copy them to
	The difference between Block and Demand is the once a Block
based on the info from the disk.
Packard LaserJet 3Si named teak.  It is using the above script as
signals to itself on behalf of LPD.
10.3.3.1.6.1.  National Semiconductor UART Family Tree
setup where you can configure your firewall host in a controlled
11   -    -	 -    -    -	Unassigned
So, one and only one drive, the one at the farthest end of the command
5.3.5.  SCSI Device Support
o  Recognizer and handler for ed.c (mostly done).
your SCSI bus is electrically sound.
Note that the `main' targets (e.g., extract, configure, etc.) do
#
(World Wide Web) traffic it is forwarding.
#  Define a function to clean up our temporary files.  These exist
:lp=:rm=rose:rp=rattan:sd=/var/spool/lpd/rattan:
Firewalls are an area of increasing interest for people who are
	The following drivers are for the so-called proprietary CD-ROM
the printer if it is ready for more data.	When it responds ready,
"type 1 removable SCSI 2" "Sequential-Access density code 0x13"
You can do:
ID wollman s/key is 99 ha73896	       ) discussed below
	on the slave DMA controller.  The slave DMA controller then
18.1.1.  High priority tasks
to do this.
If you have decided to use the ``proxy ARP'' method (instead of using
before the packet can be passed on.  syslogd with also start
	data rates on operating systems with sluggish interrupt response
----- begin /etc/sliphome/slip.login -----
	This is the mailing list for people discussing FreeBSD
	Compatibility with BSD 4.3.  Leave this in; some programs will
instructions when the DMA is active.	Subsequently, the processor must
New Password: 		   <---- enter RANDOM here
kernel, you will have to copy them from this handbook or the LINT
command line) which one to use.  If your users are not particularly
[jackgrumble 573] kinit
Fast-20) and Ultra2 (also called Fast-40). Fast-20 is 20 mega-
file.
copies of each.
end of a volume.  This shell script can be used to change tapes: