[RFC 12/13] extents and 48bit ext3: 48 bit on-disk i_file_acl support

[RFC 12/13] extents and 48bit ext3: 48 bit on-disk i_file_acl support

[Mingming Cao]

As we are planning to support 48-bit block numbers for ext3,
we need to support 48-bit block numbers for extended attributes.
In the short term, we can do this by reuse (on-disk) 16-bit
padding (linux2.i_pad1 currently used only by "hurd") as high 
order bits for xattr. This patch basically does that.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>


---

 linux-2.6.16-ming/fs/ext3/inode.c         |    8 ++++++++
 linux-2.6.16-ming/include/linux/ext3_fs.h |    6 ++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff -puN fs/ext3/inode.c~ext3_48bit_i_file_acl fs/ext3/inode.c
--- linux-2.6.16/fs/ext3/inode.c~ext3_48bit_i_file_acl	2006-06-08 16:30:09.669400945 -0700
+++ linux-2.6.16-ming/fs/ext3/inode.c	2006-06-08 16:49:31.720882123 -0700
@@ -2641,6 +2641,10 @@ void ext3_read_inode(struct inode * inod
 	ei->i_frag_size = raw_inode->i_fsize;
 #endif
 	ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl);
+	if ((sizeof(sector_t) > 4) &&
+	    (EXT3_SB(inode->i_sb)->s_es->s_creator_os != EXT3_OS_HURD))
+		ei->i_file_acl |=
+			((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
 	if (!S_ISREG(inode->i_mode)) {
 		ei->i_dir_acl = le32_to_cpu(raw_inode->i_dir_acl);
 	} else {
@@ -2774,6 +2778,10 @@ static int ext3_do_update_inode(handle_t
 	raw_inode->i_frag = ei->i_frag_no;
 	raw_inode->i_fsize = ei->i_frag_size;
 #endif
+	if ((sizeof(sector_t) > 4) &&
+	    (EXT3_SB(inode->i_sb)->s_es->s_creator_os != EXT3_OS_HURD))
+		raw_inode->i_file_acl_high =
+			cpu_to_le16((__u64)ei->i_file_acl >> 32);
 	raw_inode->i_file_acl = cpu_to_le32(ei->i_file_acl);
 	if (!S_ISREG(inode->i_mode)) {
 		raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl);
diff -puN include/linux/ext3_fs.h~ext3_48bit_i_file_acl include/linux/ext3_fs.h
--- linux-2.6.16/include/linux/ext3_fs.h~ext3_48bit_i_file_acl	2006-06-08 16:30:09.673400489 -0700
+++ linux-2.6.16-ming/include/linux/ext3_fs.h	2006-06-08 16:49:31.730880987 -0700
@@ -289,7 +289,7 @@ struct ext3_inode {
 		struct {
 			__u8	l_i_frag;	/* Fragment number */
 			__u8	l_i_fsize;	/* Fragment size */
-			__u16	i_pad1;
+			__u16	l_i_file_acl_high;
 			__le16	l_i_uid_high;	/* these 2 fields    */
 			__le16	l_i_gid_high;	/* were reserved2[0] */
 			__u32	l_i_reserved2;
@@ -305,7 +305,7 @@ struct ext3_inode {
 		struct {
 			__u8	m_i_frag;	/* Fragment number */
 			__u8	m_i_fsize;	/* Fragment size */
-			__u16	m_pad1;
+			__u16	m_i_file_acl_high;
 			__u32	m_i_reserved2[2];
 		} masix2;
 	} osd2;				/* OS dependent 2 */
@@ -319,6 +319,7 @@ struct ext3_inode {
 #define i_reserved1	osd1.linux1.l_i_reserved1
 #define i_frag		osd2.linux2.l_i_frag
 #define i_fsize		osd2.linux2.l_i_fsize
+#define i_file_acl_high	osd2.linux2.l_i_file_acl_high
 #define i_uid_low	i_uid
 #define i_gid_low	i_gid
 #define i_uid_high	osd2.linux2.l_i_uid_high
@@ -339,6 +340,7 @@ struct ext3_inode {
 #define i_reserved1	osd1.masix1.m_i_reserved1
 #define i_frag		osd2.masix2.m_i_frag
 #define i_fsize		osd2.masix2.m_i_fsize
+#define i_file_acl_high	osd2.masix2.m_i_file_acl_high
 #define i_reserved2	osd2.masix2.m_i_reserved2
 
 #endif /* defined(__KERNEL__) || defined(__linux__) */

_